sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add support for RAMTRON NVRAM devices

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3347 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2011-03-06 15:39:02 +00:00
parent 265263b173
commit ddc41b3f9c
21 changed files with 513 additions and 309 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
configs/README.txt
View File

@ -530,6 +530,8 @@ defconfig -- This is a configuration file similar to the Linux
CONFIG_MMCSD_MMCSUPPORT - Enable support for MMC cards
CONFIG_MMCSD_HAVECARDDETECT - SDIO driver card detection is
100% accurate
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
4-bit transfer mode.
RiT P14201 OLED driver
CONFIG_LCD_P14201 - Enable P14201 support

2
configs/stm3210e-eval/README.txt
View File

@ -400,6 +400,8 @@ STM3210E-EVAL-specific Configuration Options
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
Default: Medium
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
4-bit transfer mode.
Configurations
^^^^^^^^^^^^^^

4
configs/stm3210e-eval/src/up_nsh.c
View File

@ -148,8 +148,8 @@ int nsh_archinitialize(void)
#ifdef CONFIG_STM32_SPI1
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port 0\n");
spi = up_spiinitialize(0);
message("nsh_archinitialize: Initializing SPI port 1\n");
spi = up_spiinitialize(1);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port 0\n");

2
configs/vsn/README.txt
View File

@ -399,6 +399,8 @@ VSN-specific Configuration Options
CONFIG_SDIO_PRI - Select SDIO interrupt prority. Default: 128
CONFIG_SDIO_DMAPRIO - Select SDIO DMA interrupt priority.
Default: Medium
CONFIG_SDIO_WIDTH_D1_ONLY - Select 1-bit transfer mode. Default:
4-bit transfer mode.
Configurations
^^^^^^^^^^^^^^

54
configs/vsn/include/board.h
View File

@ -55,6 +55,16 @@
/************************************************************************************
* Definitions
************************************************************************************/
/* Board Configuration:
* - USART1, is the default bootloader and console
* - SPI1 is wired to expansion port
* - SPI2 is used for radio module
* - SPI3 has direct connection with FRAM
* - SDCard, conencts the microSD and shares the control lines with Sensor Interface
* to select Amplifier Gain
* - ...
*/
/* Clocking *************************************************************************/
@ -103,33 +113,44 @@
/* SDIO dividers. Note that slower clocking is required when DMA is disabled
* in order to avoid RX overrun/TX underrun errors due to delayed responses
* to service FIFOs in interrupt driven mode. These values have not been
* tuned!!!
* to service FIFOs in interrupt driven mode.
*
* SDcard default speed has max SDIO_CK freq of 25 MHz (12.5 Mbps)
* After selection of high speed freq may be 50 MHz (25 Mbps)
* Recommended default voltage: 3.3 V
*
* \todo Not checked yet! Uros.
* HCLK=36MHz, SDIOCLK=? MHz, SDIO_CK=HCLK/(178+2)=400 KHz
* HCLK=36MHz, SDIOCLK=36 MHz, SDIO_CK=HCLK/(88+2)=400 KHz
*/
#define SDIO_INIT_CLKDIV (178 << SDIO_CLKCR_CLKDIV_SHIFT)
#define SDIO_INIT_CLKDIV (88 << SDIO_CLKCR_CLKDIV_SHIFT)
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(2+2)=18 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
/* DMA ON: HCLK=36 MHz, SDIOCLK=36MHz, SDIO_CK=HCLK/(0+2)=18 MHz
* DMA OFF: HCLK=36 MHz, SDIOCLK=36MHz, SDIO_CK=HCLK/(1+2)=12 MHz
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_MMCXFR_CLKDIV (2 << SDIO_CLKCR_CLKDIV_SHIFT)
# define SDIO_MMCXFR_CLKDIV (0 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_MMCXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
# ifndef CONFIG_DEBUG
# define SDIO_MMCXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
# else
# define SDIO_MMCXFR_CLKDIV (10 << SDIO_CLKCR_CLKDIV_SHIFT)
# endif
#endif
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=24 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(3+2)=14.4 MHz
/* DMA ON: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(0+2)=18 MHz
* DMA OFF: HCLK=72 MHz, SDIOCLK=72MHz, SDIO_CK=HCLK/(1+2)=12 MHz
* Extra slow down in debug mode to get rid of underruns.
*/
#ifdef CONFIG_SDIO_DMA
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
# define SDIO_SDXFR_CLKDIV (0 << SDIO_CLKCR_CLKDIV_SHIFT)
#else
# define SDIO_SDXFR_CLKDIV (3 << SDIO_CLKCR_CLKDIV_SHIFT)
# ifndef CONFIG_DEBUG
# define SDIO_SDXFR_CLKDIV (1 << SDIO_CLKCR_CLKDIV_SHIFT)
# else
# define SDIO_SDXFR_CLKDIV (10 << SDIO_CLKCR_CLKDIV_SHIFT)
# endif
#endif
/* LED definitions ******************************************************************/
@ -146,8 +167,6 @@
#define LED_PANIC 7 /* ... */
#define LED_IDLE 8 /* shows idle state */
/* eXternal connector pins */
/************************************************************************************
* Public Data
@ -197,6 +216,11 @@ EXTERN void up_buttoninit(void);
EXTERN uint8_t up_buttons(void);
#endif
/* Other peripherals startup routines, all returning OK on success */
EXTERN int up_sdcard(void);
EXTERN int up_ramtron(void);
#undef EXTERN
#if defined(__cplusplus)
}

26
configs/vsn/nsh/defconfig
View File

@ -89,7 +89,7 @@ CONFIG_ARCH_BOOTLOADER=n
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_BUTTONS=y
CONFIG_ARCH_CALIBRATION=n
CONFIG_ARCH_DMA=y
CONFIG_ARCH_DMA=n
#
# Identify toolchain and linker options
@ -105,7 +105,7 @@ CONFIG_STM32_DFU=n
# Individual subsystems can be enabled:
# AHB:
CONFIG_STM32_DMA1=n
CONFIG_STM32_DMA2=y
CONFIG_STM32_DMA2=n
CONFIG_STM32_CRC=n
CONFIG_STM32_FSMC=n
CONFIG_STM32_SDIO=y
@ -117,8 +117,8 @@ CONFIG_STM32_TIM5=n
CONFIG_STM32_TIM6=n
CONFIG_STM32_TIM7=n
CONFIG_STM32_WWDG=n
CONFIG_STM32_SPI2=n
CONFIG_STM32_SPI4=n
CONFIG_STM32_SPI2=y
CONFIG_STM32_SPI3=y
CONFIG_STM32_USART2=n
CONFIG_STM32_USART3=n
CONFIG_STM32_UART4=n
@ -329,8 +329,9 @@ CONFIG_HAVE_LIBM=n
#
CONFIG_APP_DIR=examples/nsh
CONFIG_DEBUG=n
CONFIG_DEBUG_VERBOSE=n
CONFIG_DEBUG_VERBOSE=y
CONFIG_DEBUG_SYMBOLS=n
CONFIG_DEBUG_FS=y
CONFIG_MM_REGIONS=1
CONFIG_ARCH_LOWPUTC=y
CONFIG_RR_INTERVAL=200
@ -465,7 +466,7 @@ CONFIG_PREALLOC_TIMERS=4
# CONFIG_FAT_SECTORSIZE - Max supported sector size
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
CONFIG_FS_FAT=y
CONFIG_FS_ROMFS=n
CONFIG_FS_ROMFS=y
#
# SPI-based MMC/SD driver
@ -477,8 +478,8 @@ CONFIG_FS_ROMFS=n
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
# Default is 20MHz.
#
CONFIG_MMCSD_NSLOTS=1
CONFIG_MMCSD_READONLY=n
CONFIG_MMCSD_NSLOTS=0
CONFIG_MMCSD_READONLY=y
CONFIG_MMCSD_SPICLOCK=12500000
#
@ -502,8 +503,9 @@ CONFIG_FS_WRITEBUFFER=n
# CONFIG_MMCSD_HAVECARDDETECT
# SDIO driver card detection is 100% accurate
#
CONFIG_SDIO_DMA=y
CONFIG_MMCSD_MMCSUPPORT=n
CONFIG_SDIO_DMA=n
CONFIG_SDIO_WIDTH_D1_ONLY=y # Added single width support
CONFIG_MMCSD_MMCSUPPORT=y
CONFIG_MMCSD_HAVECARDDETECT=n
#
@ -730,7 +732,7 @@ CONFIG_EXAMPLES_NSH_STACKSIZE=2048
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
CONFIG_EXAMPLES_NSH_DISABLEBG=n
CONFIG_EXAMPLES_NSH_ROMFSETC=n
CONFIG_EXAMPLES_NSH_ROMFSETC=y
CONFIG_EXAMPLES_NSH_CONSOLE=y
CONFIG_EXAMPLES_NSH_TELNET=n
CONFIG_EXAMPLES_NSH_ARCHINIT=y
@ -746,7 +748,7 @@ CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
CONFIG_EXAMPLES_NSH_FATDEVNO=1
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
CONFIG_EXAMPLES_NSH_FATNSECTORS=40
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
#

7
configs/vsn/src/Makefile
View File

@ -43,13 +43,14 @@ CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_sysclock.c up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c
CSRCS = sysclock.c boot.c leds.c buttons.c spi.c \
usbdev.c sdcard.c ramtron.c power.c
ifeq ($(CONFIG_EXAMPLES_NSH_ARCHINIT),y)
CSRCS += up_nsh.c
CSRCS += nsh.c
endif
ifeq ($(CONFIG_APP_DIR),examples/usbstorage)
CSRCS += up_usbstrg.c
CSRCS += usbstrg.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))

12
configs/vsn/src/README.txt Normal file
View File

@ -0,0 +1,12 @@
The directory contains start-up and board level functions.
Execution starts in the following order:
- sysclock, immediately after reset stm32_rcc calls external
clock configuration when
CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG=y
is set. It must be set for the VSN board.
- boot, performs initial chip and board initialization
- ...
- nsh, as central application last.

31
configs/vsn/src/up_boot.c → configs/vsn/src/boot.c
View File

@ -1,6 +1,6 @@
/************************************************************************************
* configs/vsn/src/up_boot.c
* arch/arm/src/board/up_boot.c
* configs/vsn/src/boot.c
* arch/arm/src/board/boot.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (c) 2011 Uros Platise. All rights reserved.
@ -47,8 +47,9 @@
#include <arch/board/board.h>
#include "stm32_gpio.h"
#include "up_arch.h"
#include "vsn-internal.h"
#include "vsn.h"
/************************************************************************************
* Definitions
@ -74,15 +75,24 @@
void stm32_boardinitialize(void)
{
#ifdef CONFIG_STM32_SPI3
#warning JTAG Port Disabled as SPI3 NVRAM/FRAM support is enabled
uint32_t val = getreg32(STM32_AFIO_MAPR);
val &= 0x00FFFFFF; // clear undefined readings ...
val |= AFIO_MAPR_DISAB; // set JTAG-DP and SW-DP Disabled
putreg32(val, STM32_AFIO_MAPR);
#endif
// Set Board Voltage to 3.3 V
board_power_setbootvoltage();
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* stm32_spiinitialize() has been brought into the link.
*/
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
if (stm32_spiinitialize)
{
stm32_spiinitialize();
}
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
if (stm32_spiinitialize) stm32_spiinitialize();
#endif
/* Initialize USB is 1) USBDEV is selected, 2) the USB controller is not
@ -91,10 +101,7 @@ void stm32_boardinitialize(void)
*/
#if defined(CONFIG_USBDEV) && defined(CONFIG_STM32_USB)
if (stm32_usbinitialize)
{
stm32_usbinitialize();
}
if (stm32_usbinitialize) stm32_usbinitialize();
#endif
/* Configure on-board LEDs if LED support has been selected. */

4
configs/vsn/src/up_buttons.c → configs/vsn/src/buttons.c
View File

@ -1,5 +1,5 @@
/****************************************************************************
* configs/vsn-1.2/src/up_buttons.c
* configs/vsn/src/buttons.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Uros Platise. All rights reserved.
@ -43,7 +43,7 @@
#include <nuttx/config.h>
#include <stdint.h>
#include <arch/board/board.h>
#include "vsn-internal.h"
#include "vsn.h"
#ifdef CONFIG_ARCH_BUTTONS

6
configs/vsn/src/up_leds.c → configs/vsn/src/leds.c
View File

@ -1,6 +1,6 @@
/****************************************************************************
* configs/vsn-1.2/src/up_leds.c
* arch/arm/src/board/up_leds.c
* configs/vsn/src/leds.c
* arch/arm/src/board/leds.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Uros Platise. All rights reserved.
@ -48,7 +48,7 @@
#include <debug.h>
#include <arch/board/board.h>
#include "vsn-internal.h"
#include "vsn.h"
/****************************************************************************
* Definitions

89
configs/vsn/src/nsh.c Normal file
View File

@ -0,0 +1,89 @@
/****************************************************************************
* config/vsn/src/nsh.c
* arch/arm/src/board/nsh.c
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
*
* Authors: Uros Platise <uros.platise@isotel.eu>
* Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#include "vsn.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* PORT and SLOT number probably depend on the board configuration */
#define CONFIG_EXAMPLES_NSH_HAVEUSBDEV 1
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
up_ramtron();
up_sdcard();
return OK;
}

57
configs/vsn/src/power.c Normal file
View File

@ -0,0 +1,57 @@
/****************************************************************************
* config/vsn/src/ramtron.c
* arch/arm/src/board/ramtron.c
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
*
* Authors: Uros Platise <uros.platise@isotel.eu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "vsn.h"
void board_power_register(void);
void board_power_adjust(void);
void board_power_status(void);
void board_power_setbootvoltage(void)
{
stm32_configgpio(GPIO_PVS);
}
void board_power_reboot(void);
void board_power_off(void);

87
configs/vsn/src/ramtron.c Normal file
View File

@ -0,0 +1,87 @@
/****************************************************************************
* config/vsn/src/ramtron.c
* arch/arm/src/board/ramtron.c
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
*
* Authors: Uros Platise <uros.platise@isotel.eu>
* Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#ifdef CONFIG_STM32_SPI3
# include <nuttx/spi.h>
# include <nuttx/mtd.h>
#endif
#include "vsn.h"
int up_ramtron(void)
{
#ifdef CONFIG_STM32_SPI3
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
int retval;
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port 3\n");
spi = up_spiinitialize(3);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port 3\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port 3\n");
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = ramtron_initialize(spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port 0 to the SPI FLASH driver\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully bound SPI port 0 to the SPI FLASH driver\n");
retval = ftl_initialize(0,NULL, mtd);
message("FTL returned with %d\n", retval);
#endif
return OK;
}

120
configs/vsn/src/sdcard.c Normal file
View File

@ -0,0 +1,120 @@
/****************************************************************************
* config/vsn/src/sdcard.c
* arch/arm/src/board/sdcard.c
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
*
* Authors: Uros Platise <uros.platise@isotel.eu>
* Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#ifdef CONFIG_STM32_SDIO
# include <nuttx/sdio.h>
# include <nuttx/mmcsd.h>
#endif
#include "vsn.h"
#define CONFIG_EXAMPLES_NSH_HAVEMMCSD 1
#if defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) && CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
#endif
#ifndef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
# define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO)
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
#endif
#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR
# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0
#endif
int up_sdcard(void)
{
/* Mount the SDIO-based MMC/SD block driver */
#ifdef CONFIG_EXAMPLES_NSH_HAVEMMCSD
FAR struct sdio_dev_s *sdio;
int ret;
/* First, get an instance of the SDIO interface */
message("nsh_archinitialize: Initializing SDIO slot %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
sdio = sdio_initialize(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
if (!sdio)
{
message("nsh_archinitialize: Failed to initialize SDIO slot %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SPI interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_EXAMPLES_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n");
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the VSN board supports a GPIO to detect if there is a card in
* the slot.
*/
sdio_mediachange(sdio, true);
#endif
return OK;
}

37
configs/vsn/src/up_spi.c → configs/vsn/src/spi.c
View File

@ -1,6 +1,6 @@
/************************************************************************************
* configs/vsn/src/up_spi.c
* arch/arm/src/board/up_spi.c
* configs/vsn/src/spi.c
* arch/arm/src/board/spi.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Uros Platise. All rights reserved.
@ -42,20 +42,20 @@
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/spi.h>
#include <arch/board/board.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <nuttx/spi.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "chip.h"
#include "stm32_gpio.h"
#include "stm32_internal.h"
#include "vsn-internal.h"
#include "vsn.h"
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2)
#if defined(CONFIG_STM32_SPI1) || defined(CONFIG_STM32_SPI2) || defined(CONFIG_STM32_SPI3)
/************************************************************************************
* Definitions
@ -97,16 +97,15 @@
void weak_function stm32_spiinitialize(void)
{
/* NOTE: Clocking for SPI1 and/or SPI2 was already provided in stm32_rcc.c.
/* NOTE: Clocking for SPI1 and/or SPI2 and SPI3 was already provided in stm32_rcc.c.
* Configurations of SPI pins is performed in stm32_spi.c.
* Here, we only initialize chip select pins unique to the board
* architecture.
* Here, we only initialize chip select pins unique to the board architecture.
*/
#ifdef CONFIG_STM32_SPI1
/* Configure the SPI-based FLASH CS GPIO */
#ifdef CONFIG_STM32_SPI3
stm32_configgpio(GPIO_FLASH_CS);
// Configure the SPI-based FRAM CS GPIO
stm32_configgpio(GPIO_FRAM_CS);
#endif
}
@ -139,13 +138,6 @@ void weak_function stm32_spiinitialize(void)
void stm32_spi1select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
if (devid == SPIDEV_FLASH)
{
/* Set the GPIO low to select and high to de-select */
stm32_gpiowrite(GPIO_FLASH_CS, !selected);
}
}
uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
@ -170,6 +162,11 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
void stm32_spi3select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
{
spidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
if (devid == SPIDEV_FLASH)
{
/* Set the GPIO low to select and high to de-select */
stm32_gpiowrite(GPIO_FRAM_CS, !selected);
}
}
uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)

2
configs/vsn/src/up_sysclock.c → configs/vsn/src/sysclock.c
View File

@ -1,5 +1,5 @@
/****************************************************************************
* configs/vsn-1.2/src/up_sysclock.c
* configs/vsn/src/sysclock.c
*
* Copyright (C) 2011 Uros Platise. All rights reserved.
*

215
configs/vsn/src/up_nsh.c
View File

@ -1,215 +0,0 @@
/****************************************************************************
* config/vsn/src/up_nsh.c
* arch/arm/src/board/up_nsh.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (C) 2011 Uros Platise. All rights reserved.
*
* Authors: Gregory Nutt <spudmonkey@racsa.co.cr>
* Uros Platise <uros.platise@isotel.eu>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <stdio.h>
#include <debug.h>
#include <errno.h>
#ifdef CONFIG_STM32_SPI1
# include <nuttx/spi.h>
# include <nuttx/mtd.h>
#endif
#ifdef CONFIG_STM32_SDIO
# include <nuttx/sdio.h>
# include <nuttx/mmcsd.h>
#endif
#include "vsn-internal.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
/* For now, don't build in any SPI1 support -- NSH is not using it */
#undef CONFIG_STM32_SPI1
/* PORT and SLOT number probably depend on the board configuration */
#ifdef CONFIG_ARCH_BOARD_VSN
# define CONFIG_EXAMPLES_NSH_HAVEUSBDEV 1
# define CONFIG_EXAMPLES_NSH_HAVEMMCSD 1
# if defined(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO) && CONFIG_EXAMPLES_NSH_MMCSDSLOTNO != 0
# error "Only one MMC/SD slot"
# undef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
# endif
# ifndef CONFIG_EXAMPLES_NSH_MMCSDSLOTNO
# define CONFIG_EXAMPLES_NSH_MMCSDSLOTNO 0
# endif
#else
/* Add configuration for new STM32 boards here */
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
#endif
/* Can't support USB features if USB is not enabled */
#ifndef CONFIG_USBDEV
# undef CONFIG_EXAMPLES_NSH_HAVEUSBDEV
#endif
/* Can't support MMC/SD features if mountpoints are disabled or if SDIO support
* is not enabled.
*/
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_STM32_SDIO)
# undef CONFIG_EXAMPLES_NSH_HAVEMMCSD
#endif
#ifndef CONFIG_EXAMPLES_NSH_MMCSDMINOR
# define CONFIG_EXAMPLES_NSH_MMCSDMINOR 0
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lib_lowprintf(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lib_lowprintf
# else
# define message printf
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#ifdef CONFIG_STM32_SPI1
FAR struct spi_dev_s *spi;
FAR struct mtd_dev_s *mtd;
#endif
#ifdef CONFIG_EXAMPLES_NSH_HAVEMMCSD
FAR struct sdio_dev_s *sdio;
int ret;
#endif
/* Configure SPI-based devices */
#ifdef CONFIG_STM32_SPI1
/* Get the SPI port */
message("nsh_archinitialize: Initializing SPI port 0\n");
spi = up_spiinitialize(0);
if (!spi)
{
message("nsh_archinitialize: Failed to initialize SPI port 0\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully initialized SPI port 0\n");
/* Now bind the SPI interface to the M25P64/128 SPI FLASH driver */
message("nsh_archinitialize: Bind SPI to the SPI flash driver\n");
mtd = m25p_initialize(spi);
if (!mtd)
{
message("nsh_archinitialize: Failed to bind SPI port 0 to the SPI FLASH driver\n");
return -ENODEV;
}
message("nsh_archinitialize: Successfully bound SPI port 0 to the SPI FLASH driver\n");
#warning "Now what are we going to do with this SPI FLASH driver?"
#endif
/* Create the SPI FLASH MTD instance */
/* The M25Pxx is not a give media to implement a file system..
* its block sizes are too large
*/
/* Mount the SDIO-based MMC/SD block driver */
#ifdef CONFIG_EXAMPLES_NSH_HAVEMMCSD
/* First, get an instance of the SDIO interface */
message("nsh_archinitialize: Initializing SDIO slot %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
sdio = sdio_initialize(CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
if (!sdio)
{
message("nsh_archinitialize: Failed to initialize SDIO slot %d\n",
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO);
return -ENODEV;
}
/* Now bind the SPI interface to the MMC/SD driver */
message("nsh_archinitialize: Bind SDIO to the MMC/SD driver, minor=%d\n",
CONFIG_EXAMPLES_NSH_MMCSDMINOR);
ret = mmcsd_slotinitialize(CONFIG_EXAMPLES_NSH_MMCSDMINOR, sdio);
if (ret != OK)
{
message("nsh_archinitialize: Failed to bind SDIO to the MMC/SD driver: %d\n", ret);
return ret;
}
message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n");
/* Then let's guess and say that there is a card in the slot. I need to check to
* see if the VSN board supports a GPIO to detect if there is a card in
* the slot.
*/
sdio_mediachange(sdio, true);
#endif
return OK;
}

6
configs/vsn/src/up_usbdev.c → configs/vsn/src/usbdev.c
View File

@ -1,6 +1,6 @@
/************************************************************************************
* configs/svsn/src/up_usbdev.c
* arch/arm/src/board/up_boot.c
* configs/svsn/src/usbdev.c
* arch/arm/src/board/boot.c
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Copyright (c) 2011 Uros Platise. All rights reserved.
@ -53,7 +53,7 @@
#include "up_arch.h"
#include "stm32_internal.h"
#include "vsn-internal.h"
#include "vsn.h"
/************************************************************************************
* Definitions

4
configs/vsn/src/up_usbstrg.c → configs/vsn/src/usbstrg.c
View File

@ -1,5 +1,5 @@
/****************************************************************************
* configs/vsn/src/up_usbstrg.c
* configs/vsn/src/usbstrg.c
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (c) 2011 Uros Platise. All rights reserved.
@ -51,7 +51,7 @@
#include <nuttx/sdio.h>
#include <nuttx/mmcsd.h>
#include "vsn-internal.h"
#include "vsn.h"
#ifdef CONFIG_STM32_SDIO

55
configs/vsn/src/vsn-internal.h → configs/vsn/src/vsn.h
View File

@ -1,6 +1,6 @@
/************************************************************************************
* configs/vsn/src/vsn-internal.h
* arch/arm/src/board/vsn-internal.n
* configs/vsn/src/vsn.h
* arch/arm/src/board/vsn.n
*
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
* Copyright (c) 2011 Uros Platise. All rights reserved.
@ -44,6 +44,7 @@
* Included Files
************************************************************************************/
#include <arch/board/board.h>
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <stdint.h>
@ -52,20 +53,6 @@
* Definitions
************************************************************************************/
/* How many SPI modules does this chip support? The LM3S6918 supports 2 SPI
* modules (others may support more -- in such case, the following must be
* expanded).
*/
#if STM32_NSPI < 1
# undef CONFIG_STM32_SPI1
# undef CONFIG_STM32_SPI2
#elif STM32_NSPI < 2
# undef CONFIG_STM32_SPI2
#endif
/* VSN 1.2 GPIOs **************************************************************/
/* LED */
#define GPIO_LED (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTB|GPIO_PIN2)
@ -74,6 +61,32 @@
#define GPIO_PUSHBUTTON (GPIO_INPUT|GPIO_CNF_INFLOAT|GPIO_MODE_INPUT|GPIO_PORTC|GPIO_PIN5)
/* Power Management Pins */
#define GPIO_PVS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_2MHz|GPIO_OUTPUT_CLEAR|GPIO_PORTC|GPIO_PIN7)
/* FRAM */
#define GPIO_FRAM_CS (GPIO_OUTPUT|GPIO_CNF_OUTPP|GPIO_MODE_50MHz|GPIO_OUTPUT_SET|GPIO_PORTA|GPIO_PIN15)
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lib_lowprintf(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lib_lowprintf
# else
# define message printf
# endif
#endif
/************************************************************************************
* Public Types
************************************************************************************/
@ -108,14 +121,18 @@ extern void weak_function stm32_spiinitialize(void);
extern void weak_function stm32_usbinitialize(void);
/************************************************************************************
* Name: stm32_extcontextsave
* Power Module
*
* Description:
* Save current GPIOs that will used by external memory configurations
*
* - Provides power related board operations, such as voltage selection,
* proper reboot sequence, and power-off
************************************************************************************/
extern void board_power_setbootvoltage(void); // Default voltage at boot time
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_VSN_1_2_SRC_VSN_INTERNAL_H */