Freedom K64F: Add a networking NSH configuration.
This commit is contained in:
Gregory Nutt
parent
c8f053de92
commit
de3b8d85a4
@ -13,6 +13,9 @@ Contents
|
||||
o Ethernet
|
||||
o Development Environment
|
||||
o GNU Toolchain Options
|
||||
o Freedom K64F Configuration Options
|
||||
o Configurations
|
||||
o Status
|
||||
|
||||
Kinetis Freedom K64F Features:
|
||||
=============================
|
||||
@ -380,6 +383,23 @@ can be selected as follow:
|
||||
|
||||
Where <subdir> is one of the following:
|
||||
|
||||
netnsh:
|
||||
------
|
||||
This configuration is identical to the nsh configuration described
|
||||
below except that networking support is enabled.
|
||||
|
||||
NOTES:
|
||||
|
||||
1. Most of the notes associated with the nsh configuration apply here
|
||||
as well (see below).
|
||||
|
||||
2. Default platform/toolchain:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y : Cygwin under Windows
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW=y : ARM/mbed toolcahin (arm-none-elf-gcc)
|
||||
CONFIG_INTELHEX_BINARY=y : Output formats: Intel hex binary
|
||||
|
||||
nsh:
|
||||
---
|
||||
Configures the NuttShell (nsh) located at apps/examples/nsh using a
|
||||
@ -401,7 +421,7 @@ Where <subdir> is one of the following:
|
||||
CONFIG_HOST_LINUX=y : Linux (Cygwin under Windows okay too).
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y : Buildroot (arm-nuttx-elf-gcc)
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y : The older OABI version
|
||||
CONFIG_RAW_BINARY=y : Output formats: ELF and raw binary
|
||||
CONFIG_INTELHEX_BINARY=y : Output formats: Intel hex binary
|
||||
|
||||
3. The Serial Console is provided on UART3 with the correct pin
|
||||
configuration for use with an Arduino Serial Shield.
|
||||
@ -426,3 +446,14 @@ Where <subdir> is one of the following:
|
||||
CONFIG_SCHED_WORKQUEUE=y : Enable the NuttX workqueue
|
||||
|
||||
CONFIG_NSH_ARCHINIT=y : Provide NSH initializeation logic
|
||||
|
||||
Status
|
||||
======
|
||||
|
||||
2016-07-11: Received hardware today and the board came up on the very
|
||||
first try. That does not happen often. At this point, the very basic
|
||||
NSH configuration is working and LEDs are working. The only odd
|
||||
behavior that I see is that pressing SW3 causes an unexpected interrupt
|
||||
error.
|
||||
2016-07-12: Added support for the KSZ8081 PHY and added the netnsh
|
||||
configuration. Untested as of this writing.
|
||||
|
||||
111
configs/freedom-k64f/netnsh/Make.defs
Normal file
111
configs/freedom-k64f/netnsh/Make.defs
Normal file
@ -0,0 +1,111 @@
|
||||
############################################################################
|
||||
# configs/freedom-k64f/netnsh/Make.defs
|
||||
#
|
||||
# Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mkwindeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/flash.ld}"
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT)
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/flash.ld
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
endif
|
||||
|
||||
ifneq ($(CONFIG_DEBUG_NOOPT),y)
|
||||
ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef
|
||||
ARCHWARNINGSXX = -Wall -Wshadow -Wundef
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
ASMEXT = .S
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
1142
configs/freedom-k64f/netnsh/defconfig
Normal file
1142
configs/freedom-k64f/netnsh/defconfig
Normal file
File diff suppressed because it is too large
Load Diff
77
configs/freedom-k64f/netnsh/setenv.sh
Normal file
77
configs/freedom-k64f/netnsh/setenv.sh
Normal file
@ -0,0 +1,77 @@
|
||||
#!/bin/bash
|
||||
# configs/freedom-k64f/netnsh/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2016 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
# export TOOLCHAIN_BIN="/cygdrive/c/Users/MyName/MentorGraphics/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# This is the location where I installed the ARM "GNU Tools for ARM Embedded Processors"
|
||||
# You can this free toolchain here https://launchpad.net/gcc-arm-embedded
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/GNU Tools ARM Embedded/4.9 2015q2/bin"
|
||||
|
||||
# This is the path to the location where I installed the devkitARM toolchain
|
||||
# You can get this free toolchain from http://devkitpro.org/ or http://sourceforge.net/projects/devkitpro/
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/devkitARM/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Loading…
Reference in New Issue
Block a user