sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Updated README file, cosmetic changes to comments and debug output

Browse Source
This commit is contained in:
Gregory Nutt 2014-07-30 10:19:09 -06:00
parent 812db2e5ae
commit df57bd319d
1 changed files with 13 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
configs/sama5d4-ek/README.txt
View File

@ -1592,7 +1592,10 @@ HSMCI Card Slots
Auto-Mounter Auto-Mounter
============ ============
NuttX implements an auto-mounter than can make working with SD cards easier. With the auto-mounter, the file system will be automatically mounted when the SD card in the SD card is inserted into the HSMCI slot and automatically unmounted when the SD card is removed. NuttX implements an auto-mounter than can make working with SD cards
easier. With the auto-mounter, the file system will be automatically
mounted when the SD card is inserted into the HSMCI slot and automatically
unmounted when the SD card is removed.
Here is a sample configuration for the auto-mounter: Here is a sample configuration for the auto-mounter:
@ -1607,6 +1610,13 @@ Auto-Mounter
CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_DDELAY=1000 CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_DDELAY=1000
CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_UDELAY=2000 CONFIG_SAMA5D4EK_HSMCI0_AUTOMOUNT_UDELAY=2000
WARNING: SD cards should never be removed without first unmounting
them. This is to avoid data and possible corruption of the file
system. Certainly this is the case if you are writing to the SD card
at the time of the removal. If you use the SD card for read-only access,
however, then I cannot think of any reason why removing the card without
mounting would be harmful.
USB Ports USB Ports
========= =========
@ -3786,12 +3796,6 @@ Configurations
disabled; there was a problem at one time but that has probably disabled; there was a problem at one time but that has probably
been fixed. HSCMI with TX DMA re-enabled needs to be verified. been fixed. HSCMI with TX DMA re-enabled needs to be verified.
There does seem to be an issue with removing then re-inserting
an SD card. In that case, the SD card will fail to mount the
when the card is re-inserted. Hopefully this problem will be
fixed before you read this (in which case, I forgot to remove
this note).
13. Networking is supported via EMAC0. See the "Networking" section 13. Networking is supported via EMAC0. See the "Networking" section
above for detailed configuration settings. DHCP is not used in above for detailed configuration settings. DHCP is not used in
this configuration; rather, a hard-coded IP address of 10.0.0.2 is this configuration; rather, a hard-coded IP address of 10.0.0.2 is
@ -4225,7 +4229,8 @@ To-Do List
to be verified by re-enabled HSMCI TX DMA. to be verified by re-enabled HSMCI TX DMA.
Also, CONFIG_MMCSD_MULTIBLOCK_DISABLE=y is set to disable multi-block Also, CONFIG_MMCSD_MULTIBLOCK_DISABLE=y is set to disable multi-block
transfers. transfers. The is very low priority to me but might be important to you
if you are need very high performance SD card accesses.
3) There is a kludge in place in the Ethernet code to work around a problem 3) There is a kludge in place in the Ethernet code to work around a problem
that I see. The problem that I see is as follows: that I see. The problem that I see is as follows: