From df897c0b19b2a149b8bc0397ab0d57ec13180dd9 Mon Sep 17 00:00:00 2001 From: neilh10 Date: Sun, 17 Jan 2016 15:53:57 -0800 Subject: [PATCH] update olimex-stm32-h407 for mkdeps --- configs/olimex-stm32-h407/README.txt | 26 +- configs/olimex-stm32-h407/include/board.h | 54 +- configs/olimex-stm32-h407/nsh/Make.defs | 6 +- configs/olimex-stm32-h407/nsh/defconfig | 8 +- configs/olimex-stm32-h407/nshusb/Make.defs | 111 -- configs/olimex-stm32-h407/nshusb/defconfig | 1163 -------------------- configs/olimex-stm32-h407/nshusb/setenv.sh | 75 -- 7 files changed, 55 insertions(+), 1388 deletions(-) delete mode 100644 configs/olimex-stm32-h407/nshusb/Make.defs delete mode 100644 configs/olimex-stm32-h407/nshusb/defconfig delete mode 100644 configs/olimex-stm32-h407/nshusb/setenv.sh diff --git a/configs/olimex-stm32-h407/README.txt b/configs/olimex-stm32-h407/README.txt index a9090a0edd..30f193f38b 100644 --- a/configs/olimex-stm32-h407/README.txt +++ b/configs/olimex-stm32-h407/README.txt @@ -1,30 +1,16 @@ README ====== -The NuttX configuration for the Olimex STM32-H407 is based on the configuration -Olimex STM32-H405 / STM32-P207. +The Olimex STM32-H407 configuration is based on +stm32Fdiscovery and Olimex STM32-H405. -[[[It was tested with the NuttX EABI "buildroot" Toolchain. +The H407 was programmed with ST-LINK/V2 from both Win8.1 and Ubuntu 14.04 -Debugging with OpenOCD via an Olimex ARM-USB-TINY-H works. Note that -CONFIG_DEBUG_SYMBOLS and CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG -are enabled so that the JTAG connection is not disconnected by the idle -loop. -nshusb - tested stm32F407 OTG_HS -added nsh +nsh - Only basic shell response tested on USART2 -Make sure that '# CONFIG_NSH_CONDEV is not set' is in the .config file - it defaults -to '/dev/console' which makes problems with the shell over USB. +This realease provides baseline for H407 12MHZ clock in include/board.h -The following peripherals are enabled in this configuration. -?? - LED: Shows the sytem status +TODO: Update to use mini USB-OTG and USB HOST -?? - Button: Built in app 'buttons' works. -?? - ADC: ADC1 samples ADC_IN1. Built in app 'adc' works. -?? - USB-FS-OTG: The console is running on the virtual serial port. Note that you - have to press enter three times until NSH appears. - - - CAN: Built in app 'can' is enabled but not tested, since no CAN transceiver - is on board. diff --git a/configs/olimex-stm32-h407/include/board.h b/configs/olimex-stm32-h407/include/board.h index 211d1433a3..beee81bcf9 100644 --- a/configs/olimex-stm32-h407/include/board.h +++ b/configs/olimex-stm32-h407/include/board.h @@ -2,7 +2,8 @@ * configs/olimex-stm32-h407/include/board.h * * Copyright (C) 2014 Gregory Nutt. All rights reserved. - * Author: Gregory Nutt + * Author: Gregory Nutt + * Modified for H407 Neil Hancock * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions @@ -43,18 +44,44 @@ #include #ifndef __ASSEMBLY__ -# include +# include +# include #endif -#include "stm32_rcc.h" -#include "stm32_sdio.h" -#include "stm32.h" +#ifdef __KERNEL__ +# include "stm32_rcc.h" +# include "stm32_sdio.h" +# include "stm32.h" +#endif /************************************************************************************ * Pre-processor Definitions ************************************************************************************/ /* Clocking *************************************************************************/ +/* The Olimex-STM32-H407 board features a 12MHz crystal and + * a 32kHz RTC backup crystal. + * + * This is the canonical configuration: + * System Clock source : PLL (HSE) + * SYSCLK(Hz) : 168000000 Determined by PLL configuration + * HCLK(Hz) : 168000000 (STM32_RCC_CFGR_HPRE) + * AHB Prescaler : 1 (STM32_RCC_CFGR_HPRE) + * APB1 Prescaler : 4 (STM32_RCC_CFGR_PPRE1) + * APB2 Prescaler : 2 (STM32_RCC_CFGR_PPRE2) + * HSE Frequency(Hz) : 8000000 (STM32_BOARD_XTAL) + * PLLM : 8 (STM32_PLLCFG_PLLM) + * PLLN : 336 (STM32_PLLCFG_PLLN) + * PLLP : 2 (STM32_PLLCFG_PLLP) + * PLLQ : 7 (STM32_PLLCFG_PLLQ) + * Main regulator output voltage : Scale1 mode Needed for high speed SYSCLK + * Flash Latency(WS) : 5 + * Prefetch Buffer : OFF + * Instruction cache : ON + * Data cache : ON + * Require 48MHz for USB OTG FS, : Enabled + * SDIO and RNG clock + */ /* HSI - 16 MHz RC factory-trimmed * LSI - 32 KHz RC (30-60KHz, uncalibrated) @@ -94,20 +121,20 @@ #define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(5) #define STM32_PLLCFG_PLLQ RCC_PLLCFG_PLLQ(7) -/* AHB clock (HCLK) is SYSCLK (168MHz) ?*/ #define STM32_SYSCLK_FREQUENCY 168000000ul +/* AHB clock (HCLK) is SYSCLK (168MHz) */ + #define STM32_RCC_CFGR_HPRE RCC_CFGR_HPRE_SYSCLK /* HCLK = SYSCLK / 1 */ #define STM32_HCLK_FREQUENCY STM32_SYSCLK_FREQUENCY #define STM32_BOARD_HCLK STM32_HCLK_FREQUENCY /* same as above, to satisfy compiler */ -/* APB1 clock (PCLK1) is HCLK/4 (30MHz) */ /* APB1 clock (PCLK1) is HCLK/4 (42MHz) */ #define STM32_RCC_CFGR_PPRE1 RCC_CFGR_PPRE1_HCLKd4 /* PCLK1 = HCLK / 4 */ #define STM32_PCLK1_FREQUENCY (STM32_HCLK_FREQUENCY/4) -/* Timers driven from APB1 will be twice PCLK1 (60Mhz)*/ +/* Timers driven from APB1 will be twice PCLK1 */ #define STM32_APB1_TIM2_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM3_CLKIN (2*STM32_PCLK1_FREQUENCY) @@ -119,12 +146,12 @@ #define STM32_APB1_TIM13_CLKIN (2*STM32_PCLK1_FREQUENCY) #define STM32_APB1_TIM14_CLKIN (2*STM32_PCLK1_FREQUENCY) -/* APB2 clock (PCLK2) is HCLK/2 (60MHz) */ +/* APB2 clock (PCLK2) is HCLK/2 */ #define STM32_RCC_CFGR_PPRE2 RCC_CFGR_PPRE2_HCLKd2 /* PCLK2 = HCLK / 2 */ #define STM32_PCLK2_FREQUENCY (STM32_HCLK_FREQUENCY/2) -/* Timers driven from APB2 will be twice PCLK2 (120Mhz)*/ +/* Timers driven from APB2 will be twice PCLK2 */ #define STM32_APB2_TIM1_CLKIN (2*STM32_PCLK2_FREQUENCY) #define STM32_APB2_TIM8_CLKIN (2*STM32_PCLK2_FREQUENCY) @@ -183,6 +210,7 @@ //#define GPIO_USART3_CTS GPIO_USART3_CTS_1 //PB13 //#define GPIO_USART3_RTS GPIO_USART3_RTS_1 //PB14 +//USART2 #define GPIO_USART2_RX GPIO_USART2_RX_1 // #define GPIO_USART2_TX GPIO_USART2_TX_1 // #define GPIO_USART2_CTS GPIO_USART2_CTS_1 // @@ -203,7 +231,8 @@ #undef EXTERN #if defined(__cplusplus) #define EXTERN extern "C" -extern "C" { +extern "C" +{ #else #define EXTERN extern #endif @@ -211,12 +240,13 @@ extern "C" { /************************************************************************************ * Public Function Prototypes ************************************************************************************/ + /************************************************************************************ * Name: stm32_boardinitialize * * Description: * All STM32 architectures must provide the following entry point. This entry point - * is called early in the intitialization -- after all memory has been configured + * is called early in the initialization -- after all memory has been configured * and mapped but before any devices have been initialized. * ************************************************************************************/ diff --git a/configs/olimex-stm32-h407/nsh/Make.defs b/configs/olimex-stm32-h407/nsh/Make.defs index dd2c979210..38887dee87 100644 --- a/configs/olimex-stm32-h407/nsh/Make.defs +++ b/configs/olimex-stm32-h407/nsh/Make.defs @@ -1,5 +1,5 @@ ############################################################################ -# configs/stm32f4discovery/nsh/Make.defs +# configs/olimex-stm32-h407/nsh/Make.defs # # Copyright (C) 2011-2012 Gregory Nutt. All rights reserved. # Author: Gregory Nutt @@ -43,13 +43,13 @@ ifeq ($(WINTOOL),y) # Windows-native toolchains DIRLINK = $(TOPDIR)/tools/copydir.sh DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" else # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) ARCHINCLUDES = -I. -isystem $(TOPDIR)/include ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) diff --git a/configs/olimex-stm32-h407/nsh/defconfig b/configs/olimex-stm32-h407/nsh/defconfig index eba6105f59..afe4924f9a 100644 --- a/configs/olimex-stm32-h407/nsh/defconfig +++ b/configs/olimex-stm32-h407/nsh/defconfig @@ -45,7 +45,7 @@ CONFIG_RAW_BINARY=y CONFIG_ARCH_HAVE_HEAPCHECK=y CONFIG_ARCH_HAVE_STACKCHECK=y # CONFIG_STACK_COLORATION is not set -# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_DEBUG_SYMBOLS=y CONFIG_ARCH_HAVE_CUSTOMOPT=y # CONFIG_DEBUG_NOOPT is not set # CONFIG_DEBUG_CUSTOMOPT is not set @@ -543,9 +543,9 @@ CONFIG_USEC_PER_TICK=10000 # CONFIG_SYSTEM_TIME64 is not set # CONFIG_CLOCK_MONOTONIC is not set # CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2015 -CONFIG_START_MONTH=12 -CONFIG_START_DAY=19 +CONFIG_START_YEAR=2016 +CONFIG_START_MONTH=1 +CONFIG_START_DAY=1 CONFIG_MAX_WDOGPARMS=2 CONFIG_PREALLOC_WDOGS=16 CONFIG_WDOG_INTRESERVE=4 diff --git a/configs/olimex-stm32-h407/nshusb/Make.defs b/configs/olimex-stm32-h407/nshusb/Make.defs deleted file mode 100644 index eb432c3139..0000000000 --- a/configs/olimex-stm32-h407/nshusb/Make.defs +++ /dev/null @@ -1,111 +0,0 @@ -############################################################################ -# configs/olimex-stm32-h407/nshusb/Make.defs -# -# Copyright (C) 2014 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -include ${TOPDIR}/.config -include ${TOPDIR}/tools/Config.mk -include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs - -LDSCRIPT = ld.script - -ifeq ($(WINTOOL),y) - # Windows-native toolchains - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" -else - # Linux/Cygwin-native toolchain - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) -endif - -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -gdwarf-2 -endif - -ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer -endif - -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -ARCHWARNINGSXX = -Wall -Wshadow -Wundef -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 - -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ - -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 - -ASMEXT = .S -OBJEXT = .o -LIBEXT = .a -EXEEXT = - -ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs -endif -ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g -endif - -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe -HOSTLDFLAGS = diff --git a/configs/olimex-stm32-h407/nshusb/defconfig b/configs/olimex-stm32-h407/nshusb/defconfig deleted file mode 100644 index f2e59c3104..0000000000 --- a/configs/olimex-stm32-h407/nshusb/defconfig +++ /dev/null @@ -1,1163 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Nuttx/ Configuration -# - -# -# Build Setup -# -# CONFIG_EXPERIMENTAL is not set -# CONFIG_DEFAULT_SMALL is not set -CONFIG_HOST_LINUX=y -# CONFIG_HOST_OSX is not set -# CONFIG_HOST_WINDOWS is not set -# CONFIG_HOST_OTHER is not set - -# -# Build Configuration -# -CONFIG_APPS_DIR="../apps" -CONFIG_BUILD_FLAT=y -# CONFIG_BUILD_2PASS is not set - -# -# Binary Output Formats -# -# CONFIG_RRLOAD_BINARY is not set -CONFIG_INTELHEX_BINARY=y -# CONFIG_MOTOROLA_SREC is not set -CONFIG_RAW_BINARY=y -# CONFIG_UBOOT_UIMAGE is not set - -# -# Customize Header Files -# -# CONFIG_ARCH_STDINT_H is not set -# CONFIG_ARCH_STDBOOL_H is not set -# CONFIG_ARCH_MATH_H is not set -# CONFIG_ARCH_FLOAT_H is not set -# CONFIG_ARCH_STDARG_H is not set - -# -# Debug Options -# -# CONFIG_DEBUG is not set -CONFIG_ARCH_HAVE_HEAPCHECK=y -CONFIG_ARCH_HAVE_STACKCHECK=y -# CONFIG_STACK_COLORATION is not set -# CONFIG_DEBUG_SYMBOLS is not set -CONFIG_ARCH_HAVE_CUSTOMOPT=y -# CONFIG_DEBUG_NOOPT is not set -# CONFIG_DEBUG_CUSTOMOPT is not set -CONFIG_DEBUG_FULLOPT=y - -# -# System Type -# -CONFIG_ARCH_ARM=y -# CONFIG_ARCH_AVR is not set -# CONFIG_ARCH_HC is not set -# CONFIG_ARCH_MIPS is not set -# CONFIG_ARCH_RGMP is not set -# CONFIG_ARCH_SH is not set -# CONFIG_ARCH_SIM is not set -# CONFIG_ARCH_X86 is not set -# CONFIG_ARCH_Z16 is not set -# CONFIG_ARCH_Z80 is not set -CONFIG_ARCH="arm" - -# -# ARM Options -# -# CONFIG_ARCH_CHIP_A1X is not set -# CONFIG_ARCH_CHIP_C5471 is not set -# CONFIG_ARCH_CHIP_CALYPSO is not set -# CONFIG_ARCH_CHIP_DM320 is not set -# CONFIG_ARCH_CHIP_EFM32 is not set -# CONFIG_ARCH_CHIP_IMX is not set -# CONFIG_ARCH_CHIP_KINETIS is not set -# CONFIG_ARCH_CHIP_KL is not set -# CONFIG_ARCH_CHIP_LM is not set -# CONFIG_ARCH_CHIP_TIVA is not set -# CONFIG_ARCH_CHIP_LPC11XX is not set -# CONFIG_ARCH_CHIP_LPC17XX is not set -# CONFIG_ARCH_CHIP_LPC214X is not set -# CONFIG_ARCH_CHIP_LPC2378 is not set -# CONFIG_ARCH_CHIP_LPC31XX is not set -# CONFIG_ARCH_CHIP_LPC43XX is not set -# CONFIG_ARCH_CHIP_NUC1XX is not set -# CONFIG_ARCH_CHIP_SAMA5 is not set -# CONFIG_ARCH_CHIP_SAMD is not set -# CONFIG_ARCH_CHIP_SAML is not set -# CONFIG_ARCH_CHIP_SAM34 is not set -# CONFIG_ARCH_CHIP_SAMV7 is not set -CONFIG_ARCH_CHIP_STM32=y -# CONFIG_ARCH_CHIP_STM32F7 is not set -# CONFIG_ARCH_CHIP_STR71X is not set -# CONFIG_ARCH_CHIP_TMS570 is not set -# CONFIG_ARCH_CHIP_MOXART is not set -# CONFIG_ARCH_ARM7TDMI is not set -# CONFIG_ARCH_ARM926EJS is not set -# CONFIG_ARCH_ARM920T is not set -# CONFIG_ARCH_CORTEXM0 is not set -# CONFIG_ARCH_CORTEXM3 is not set -CONFIG_ARCH_CORTEXM4=y -# CONFIG_ARCH_CORTEXM7 is not set -# CONFIG_ARCH_CORTEXA5 is not set -# CONFIG_ARCH_CORTEXA8 is not set -# CONFIG_ARCH_CORTEXR4 is not set -# CONFIG_ARCH_CORTEXR4F is not set -# CONFIG_ARCH_CORTEXR5 is not set -# CONFIG_ARCH_CORTEX5F is not set -# CONFIG_ARCH_CORTEXR7 is not set -# CONFIG_ARCH_CORTEXR7F is not set -CONFIG_ARCH_FAMILY="armv7-m" -CONFIG_ARCH_CHIP="stm32" -# CONFIG_ARMV7M_USEBASEPRI is not set -CONFIG_ARCH_HAVE_CMNVECTOR=y -# CONFIG_ARMV7M_CMNVECTOR is not set -# CONFIG_ARMV7M_LAZYFPU is not set -CONFIG_ARCH_HAVE_FPU=y -# CONFIG_ARCH_HAVE_DPFPU is not set -# CONFIG_ARCH_FPU is not set -CONFIG_ARM_HAVE_MPU_UNIFIED=y -# CONFIG_ARM_MPU is not set - -# -# ARMV7M Configuration Options -# -# CONFIG_ARMV7M_HAVE_ICACHE is not set -# CONFIG_ARMV7M_HAVE_DCACHE is not set -# CONFIG_ARMV7M_HAVE_ITCM is not set -# CONFIG_ARMV7M_HAVE_DTCM is not set -# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set -# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set -CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y -CONFIG_ARMV7M_HAVE_STACKCHECK=y -# CONFIG_ARMV7M_STACKCHECK is not set -# CONFIG_ARMV7M_ITMSYSLOG is not set -# CONFIG_SERIAL_TERMIOS is not set -# CONFIG_CAN_EXTID is not set -# CONFIG_CAN_LOOPBACK is not set - -# -# STM32 Configuration Options -# -# CONFIG_ARCH_CHIP_STM32L151C6 is not set -# CONFIG_ARCH_CHIP_STM32L151C8 is not set -# CONFIG_ARCH_CHIP_STM32L151CB is not set -# CONFIG_ARCH_CHIP_STM32L151R6 is not set -# CONFIG_ARCH_CHIP_STM32L151R8 is not set -# CONFIG_ARCH_CHIP_STM32L151RB is not set -# CONFIG_ARCH_CHIP_STM32L151V6 is not set -# CONFIG_ARCH_CHIP_STM32L151V8 is not set -# CONFIG_ARCH_CHIP_STM32L151VB is not set -# CONFIG_ARCH_CHIP_STM32L152C6 is not set -# CONFIG_ARCH_CHIP_STM32L152C8 is not set -# CONFIG_ARCH_CHIP_STM32L152CB is not set -# CONFIG_ARCH_CHIP_STM32L152R6 is not set -# CONFIG_ARCH_CHIP_STM32L152R8 is not set -# CONFIG_ARCH_CHIP_STM32L152RB is not set -# CONFIG_ARCH_CHIP_STM32L152V6 is not set -# CONFIG_ARCH_CHIP_STM32L152V8 is not set -# CONFIG_ARCH_CHIP_STM32L152VB is not set -# CONFIG_ARCH_CHIP_STM32L162ZD is not set -# CONFIG_ARCH_CHIP_STM32L162VE is not set -# CONFIG_ARCH_CHIP_STM32F100C8 is not set -# CONFIG_ARCH_CHIP_STM32F100CB is not set -# CONFIG_ARCH_CHIP_STM32F100R8 is not set -# CONFIG_ARCH_CHIP_STM32F100RB is not set -# CONFIG_ARCH_CHIP_STM32F100RC is not set -# CONFIG_ARCH_CHIP_STM32F100RD is not set -# CONFIG_ARCH_CHIP_STM32F100RE is not set -# CONFIG_ARCH_CHIP_STM32F100V8 is not set -# CONFIG_ARCH_CHIP_STM32F100VB is not set -# CONFIG_ARCH_CHIP_STM32F100VC is not set -# CONFIG_ARCH_CHIP_STM32F100VD is not set -# CONFIG_ARCH_CHIP_STM32F100VE is not set -# CONFIG_ARCH_CHIP_STM32F102CB is not set -# CONFIG_ARCH_CHIP_STM32F103T8 is not set -# CONFIG_ARCH_CHIP_STM32F103TB is not set -# CONFIG_ARCH_CHIP_STM32F103C4 is not set -# CONFIG_ARCH_CHIP_STM32F103C8 is not set -# CONFIG_ARCH_CHIP_STM32F103CB is not set -# CONFIG_ARCH_CHIP_STM32F103R8 is not set -# CONFIG_ARCH_CHIP_STM32F103RB is not set -# CONFIG_ARCH_CHIP_STM32F103RC is not set -# CONFIG_ARCH_CHIP_STM32F103RD is not set -# CONFIG_ARCH_CHIP_STM32F103RE is not set -# CONFIG_ARCH_CHIP_STM32F103RG is not set -# CONFIG_ARCH_CHIP_STM32F103V8 is not set -# CONFIG_ARCH_CHIP_STM32F103VB is not set -# CONFIG_ARCH_CHIP_STM32F103VC is not set -# CONFIG_ARCH_CHIP_STM32F103VE is not set -# CONFIG_ARCH_CHIP_STM32F103ZE is not set -# CONFIG_ARCH_CHIP_STM32F105VB is not set -# CONFIG_ARCH_CHIP_STM32F107VC is not set -# CONFIG_ARCH_CHIP_STM32F205RG is not set -# CONFIG_ARCH_CHIP_STM32F207IG is not set -# CONFIG_ARCH_CHIP_STM32F207ZE is not set -# CONFIG_ARCH_CHIP_STM32F302K6 is not set -# CONFIG_ARCH_CHIP_STM32F302K8 is not set -# CONFIG_ARCH_CHIP_STM32F302CB is not set -# CONFIG_ARCH_CHIP_STM32F302CC is not set -# CONFIG_ARCH_CHIP_STM32F302RB is not set -# CONFIG_ARCH_CHIP_STM32F302RC is not set -# CONFIG_ARCH_CHIP_STM32F302VB is not set -# CONFIG_ARCH_CHIP_STM32F302VC is not set -# CONFIG_ARCH_CHIP_STM32F303K6 is not set -# CONFIG_ARCH_CHIP_STM32F303K8 is not set -# CONFIG_ARCH_CHIP_STM32F303C6 is not set -# CONFIG_ARCH_CHIP_STM32F303C8 is not set -# CONFIG_ARCH_CHIP_STM32F303CB is not set -# CONFIG_ARCH_CHIP_STM32F303CC is not set -# CONFIG_ARCH_CHIP_STM32F303RB is not set -# CONFIG_ARCH_CHIP_STM32F303RC is not set -# CONFIG_ARCH_CHIP_STM32F303RD is not set -# CONFIG_ARCH_CHIP_STM32F303RE is not set -# CONFIG_ARCH_CHIP_STM32F303VB is not set -# CONFIG_ARCH_CHIP_STM32F303VC is not set -# CONFIG_ARCH_CHIP_STM32F372C8 is not set -# CONFIG_ARCH_CHIP_STM32F372R8 is not set -# CONFIG_ARCH_CHIP_STM32F372V8 is not set -# CONFIG_ARCH_CHIP_STM32F372CB is not set -# CONFIG_ARCH_CHIP_STM32F372RB is not set -# CONFIG_ARCH_CHIP_STM32F372VB is not set -# CONFIG_ARCH_CHIP_STM32F372CC is not set -# CONFIG_ARCH_CHIP_STM32F372RC is not set -# CONFIG_ARCH_CHIP_STM32F372VC is not set -# CONFIG_ARCH_CHIP_STM32F373C8 is not set -# CONFIG_ARCH_CHIP_STM32F373R8 is not set -# CONFIG_ARCH_CHIP_STM32F373V8 is not set -# CONFIG_ARCH_CHIP_STM32F373CB is not set -# CONFIG_ARCH_CHIP_STM32F373RB is not set -# CONFIG_ARCH_CHIP_STM32F373VB is not set -# CONFIG_ARCH_CHIP_STM32F373CC is not set -# CONFIG_ARCH_CHIP_STM32F373RC is not set -# CONFIG_ARCH_CHIP_STM32F373VC is not set -# CONFIG_ARCH_CHIP_STM32F401RE is not set -# CONFIG_ARCH_CHIP_STM32F411RE is not set -# CONFIG_ARCH_CHIP_STM32F405RG is not set -# CONFIG_ARCH_CHIP_STM32F405VG is not set -# CONFIG_ARCH_CHIP_STM32F405ZG is not set -# CONFIG_ARCH_CHIP_STM32F407VE is not set -# CONFIG_ARCH_CHIP_STM32F407VG is not set -# CONFIG_ARCH_CHIP_STM32F407ZE is not set -CONFIG_ARCH_CHIP_STM32F407ZG=y -# CONFIG_ARCH_CHIP_STM32F407IE is not set -# CONFIG_ARCH_CHIP_STM32F407IG is not set -# CONFIG_ARCH_CHIP_STM32F427V is not set -# CONFIG_ARCH_CHIP_STM32F427Z is not set -# CONFIG_ARCH_CHIP_STM32F427I is not set -# CONFIG_ARCH_CHIP_STM32F429V is not set -# CONFIG_ARCH_CHIP_STM32F429Z is not set -# CONFIG_ARCH_CHIP_STM32F429I is not set -# CONFIG_ARCH_CHIP_STM32F429B is not set -# CONFIG_ARCH_CHIP_STM32F429N is not set -# CONFIG_ARCH_CHIP_STM32F446M is not set -# CONFIG_ARCH_CHIP_STM32F446R is not set -# CONFIG_ARCH_CHIP_STM32F446V is not set -# CONFIG_ARCH_CHIP_STM32F446Z is not set -CONFIG_STM32_FLASH_CONFIG_DEFAULT=y -# CONFIG_STM32_FLASH_CONFIG_4 is not set -# CONFIG_STM32_FLASH_CONFIG_6 is not set -# CONFIG_STM32_FLASH_CONFIG_8 is not set -# CONFIG_STM32_FLASH_CONFIG_B is not set -# CONFIG_STM32_FLASH_CONFIG_C is not set -# CONFIG_STM32_FLASH_CONFIG_D is not set -# CONFIG_STM32_FLASH_CONFIG_E is not set -# CONFIG_STM32_FLASH_CONFIG_F is not set -# CONFIG_STM32_FLASH_CONFIG_G is not set -# CONFIG_STM32_FLASH_CONFIG_I is not set -# CONFIG_STM32_STM32L15XX is not set -# CONFIG_STM32_ENERGYLITE is not set -# CONFIG_STM32_STM32F10XX is not set -# CONFIG_STM32_VALUELINE is not set -# CONFIG_STM32_CONNECTIVITYLINE is not set -# CONFIG_STM32_PERFORMANCELINE is not set -# CONFIG_STM32_USBACCESSLINE is not set -# CONFIG_STM32_HIGHDENSITY is not set -# CONFIG_STM32_MEDIUMDENSITY is not set -# CONFIG_STM32_LOWDENSITY is not set -# CONFIG_STM32_STM32F20XX is not set -# CONFIG_STM32_STM32F205 is not set -# CONFIG_STM32_STM32F207 is not set -# CONFIG_STM32_STM32F30XX is not set -# CONFIG_STM32_STM32F302 is not set -# CONFIG_STM32_STM32F303 is not set -# CONFIG_STM32_STM32F37XX is not set -CONFIG_STM32_STM32F40XX=y -# CONFIG_STM32_STM32F401 is not set -# CONFIG_STM32_STM32F411 is not set -# CONFIG_STM32_STM32F405 is not set -CONFIG_STM32_STM32F407=y -# CONFIG_STM32_STM32F427 is not set -# CONFIG_STM32_STM32F429 is not set -# CONFIG_STM32_STM32F446 is not set -# CONFIG_STM32_DFU is not set - -# -# STM32 Peripheral Support -# -CONFIG_STM32_HAVE_CCM=y -# CONFIG_STM32_HAVE_USBDEV is not set -CONFIG_STM32_HAVE_OTGFS=y -CONFIG_STM32_HAVE_FSMC=y -CONFIG_STM32_HAVE_USART3=y -CONFIG_STM32_HAVE_UART4=y -CONFIG_STM32_HAVE_UART5=y -CONFIG_STM32_HAVE_USART6=y -# CONFIG_STM32_HAVE_UART7 is not set -# CONFIG_STM32_HAVE_UART8 is not set -CONFIG_STM32_HAVE_TIM1=y -CONFIG_STM32_HAVE_TIM3=y -CONFIG_STM32_HAVE_TIM4=y -CONFIG_STM32_HAVE_TIM5=y -CONFIG_STM32_HAVE_TIM6=y -CONFIG_STM32_HAVE_TIM7=y -CONFIG_STM32_HAVE_TIM8=y -CONFIG_STM32_HAVE_TIM9=y -CONFIG_STM32_HAVE_TIM10=y -CONFIG_STM32_HAVE_TIM11=y -CONFIG_STM32_HAVE_TIM12=y -CONFIG_STM32_HAVE_TIM13=y -CONFIG_STM32_HAVE_TIM14=y -# CONFIG_STM32_HAVE_TIM15 is not set -# CONFIG_STM32_HAVE_TIM16 is not set -# CONFIG_STM32_HAVE_TIM17 is not set -CONFIG_STM32_HAVE_ADC2=y -CONFIG_STM32_HAVE_ADC3=y -# CONFIG_STM32_HAVE_ADC4 is not set -# CONFIG_STM32_HAVE_ADC1_DMA is not set -# CONFIG_STM32_HAVE_ADC2_DMA is not set -# CONFIG_STM32_HAVE_ADC3_DMA is not set -# CONFIG_STM32_HAVE_ADC4_DMA is not set -CONFIG_STM32_HAVE_CAN1=y -CONFIG_STM32_HAVE_CAN2=y -CONFIG_STM32_HAVE_DAC1=y -CONFIG_STM32_HAVE_DAC2=y -CONFIG_STM32_HAVE_RNG=y -CONFIG_STM32_HAVE_ETHMAC=y -CONFIG_STM32_HAVE_I2C2=y -CONFIG_STM32_HAVE_I2C3=y -CONFIG_STM32_HAVE_SPI2=y -CONFIG_STM32_HAVE_SPI3=y -# CONFIG_STM32_HAVE_SPI4 is not set -# CONFIG_STM32_HAVE_SPI5 is not set -# CONFIG_STM32_HAVE_SPI6 is not set -# CONFIG_STM32_HAVE_SAIPLL is not set -# CONFIG_STM32_HAVE_I2SPLL is not set -CONFIG_STM32_ADC1=y -# CONFIG_STM32_ADC2 is not set -# CONFIG_STM32_ADC3 is not set -# CONFIG_STM32_BKPSRAM is not set -# CONFIG_STM32_CAN1 is not set -# CONFIG_STM32_CAN2 is not set -# CONFIG_STM32_CCMDATARAM is not set -# CONFIG_STM32_CRC is not set -# CONFIG_STM32_CRYP is not set -# CONFIG_STM32_DMA1 is not set -# CONFIG_STM32_DMA2 is not set -# CONFIG_STM32_DAC1 is not set -# CONFIG_STM32_DAC2 is not set -# CONFIG_STM32_DCMI is not set -# CONFIG_STM32_ETHMAC is not set -# CONFIG_STM32_FSMC is not set -# CONFIG_STM32_HASH is not set -# CONFIG_STM32_I2C1 is not set -# CONFIG_STM32_I2C2 is not set -# CONFIG_STM32_I2C3 is not set -# CONFIG_STM32_OTGFS is not set -CONFIG_STM32_OTGHS=y -CONFIG_STM32_PWR=y -# CONFIG_STM32_RNG is not set -# CONFIG_STM32_SDIO is not set -# CONFIG_STM32_SPI1 is not set -# CONFIG_STM32_SPI2 is not set -# CONFIG_STM32_SPI3 is not set -CONFIG_STM32_SYSCFG=y -CONFIG_STM32_TIM1=y -# CONFIG_STM32_TIM2 is not set -# CONFIG_STM32_TIM3 is not set -# CONFIG_STM32_TIM4 is not set -# CONFIG_STM32_TIM5 is not set -# CONFIG_STM32_TIM6 is not set -# CONFIG_STM32_TIM7 is not set -# CONFIG_STM32_TIM8 is not set -# CONFIG_STM32_TIM9 is not set -# CONFIG_STM32_TIM10 is not set -# CONFIG_STM32_TIM11 is not set -# CONFIG_STM32_TIM12 is not set -# CONFIG_STM32_TIM13 is not set -# CONFIG_STM32_TIM14 is not set -# CONFIG_STM32_USART1 is not set -CONFIG_STM32_USART2=y -# CONFIG_STM32_USART3 is not set -# CONFIG_STM32_UART4 is not set -# CONFIG_STM32_UART5 is not set -# CONFIG_STM32_USART6 is not set -# CONFIG_STM32_IWDG is not set -# CONFIG_STM32_WWDG is not set -CONFIG_STM32_ADC=y -# CONFIG_STM32_NOEXT_VECTORS is not set - -# -# Alternate Pin Mapping -# -# CONFIG_STM32_FLASH_PREFETCH is not set -# CONFIG_STM32_JTAG_DISABLE is not set -# CONFIG_STM32_JTAG_FULL_ENABLE is not set -# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set -CONFIG_STM32_JTAG_SW_ENABLE=y -CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y -# CONFIG_STM32_FORCEPOWER is not set -# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set -# CONFIG_STM32_CCMEXCLUDE is not set -# CONFIG_STM32_TIM1_PWM is not set -CONFIG_STM32_TIM1_ADC=y -CONFIG_STM32_TIM1_ADC1=y -CONFIG_HAVE_ADC1_TIMER=y -CONFIG_STM32_ADC1_SAMPLE_FREQUENCY=100 -CONFIG_STM32_ADC1_TIMTRIG=0 - -# -# ADC Configuration -# -CONFIG_STM32_USART=y - -# -# U[S]ART Configuration -# -# CONFIG_USART2_RS485 is not set -# CONFIG_SERIAL_DISABLE_REORDERING is not set -# CONFIG_STM32_FLOWCONTROL_BROKEN is not set -# CONFIG_STM32_USART_SINGLEWIRE is not set -# CONFIG_STM32_HAVE_RTC_COUNTER is not set -# CONFIG_STM32_HAVE_RTC_SUBSECONDS is not set - -# -# USB FS Host Configuration -# - -# -# USB HS Host Configuration -# - -# -# USB Host Debug Configuration -# - -# -# USB Device Configuration -# - -# -# Architecture Options -# -# CONFIG_ARCH_NOINTC is not set -# CONFIG_ARCH_VECNOTIRQ is not set -# CONFIG_ARCH_DMA is not set -CONFIG_ARCH_HAVE_IRQPRIO=y -# CONFIG_ARCH_L2CACHE is not set -# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set -# CONFIG_ARCH_HAVE_ADDRENV is not set -# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set -CONFIG_ARCH_HAVE_VFORK=y -# CONFIG_ARCH_HAVE_MMU is not set -CONFIG_ARCH_HAVE_MPU=y -# CONFIG_ARCH_NAND_HWECC is not set -# CONFIG_ARCH_HAVE_EXTCLK is not set -# CONFIG_ARCH_HAVE_POWEROFF is not set -CONFIG_ARCH_HAVE_RESET=y -# CONFIG_ARCH_USE_MPU is not set -# CONFIG_ARCH_IRQPRIO is not set -CONFIG_ARCH_STACKDUMP=y -# CONFIG_ENDIAN_BIG is not set -# CONFIG_ARCH_IDLE_CUSTOM is not set -# CONFIG_ARCH_HAVE_RAMFUNCS is not set -CONFIG_ARCH_HAVE_RAMVECTORS=y -# CONFIG_ARCH_RAMVECTORS is not set - -# -# Board Settings -# -CONFIG_BOARD_LOOPSPERMSEC=16717 -# CONFIG_ARCH_CALIBRATION is not set - -# -# Interrupt options -# -CONFIG_ARCH_HAVE_INTERRUPTSTACK=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y -# CONFIG_ARCH_HIPRI_INTERRUPT is not set - -# -# Boot options -# -# CONFIG_BOOT_RUNFROMEXTSRAM is not set -CONFIG_BOOT_RUNFROMFLASH=y -# CONFIG_BOOT_RUNFROMISRAM is not set -# CONFIG_BOOT_RUNFROMSDRAM is not set -# CONFIG_BOOT_COPYTORAM is not set - -# -# Boot Memory Configuration -# -CONFIG_RAM_START=0x20000000 -CONFIG_RAM_SIZE=114688 -# CONFIG_ARCH_HAVE_SDRAM is not set - -# -# Board Selection -# -CONFIG_ARCH_BOARD_OLIMEX_STM32H407=y -# CONFIG_ARCH_BOARD_CUSTOM is not set -CONFIG_ARCH_BOARD="olimex-stm32-h407" - -# -# Common Board Options -# -CONFIG_ARCH_HAVE_LEDS=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_HAVE_BUTTONS=y -CONFIG_ARCH_BUTTONS=y -CONFIG_ARCH_HAVE_IRQBUTTONS=y -CONFIG_ARCH_IRQBUTTONS=y -CONFIG_NSH_MMCSDMINOR=0 - -# -# Board-Specific Options -# -CONFIG_LIB_BOARDCTL=y -# CONFIG_BOARDCTL_RESET is not set -# CONFIG_BOARDCTL_UNIQUEID is not set -# CONFIG_BOARDCTL_TSCTEST is not set -CONFIG_BOARDCTL_ADCTEST=y -# CONFIG_BOARDCTL_PWMTEST is not set -# CONFIG_BOARDCTL_CANINIT is not set -# CONFIG_BOARDCTL_GRAPHICS is not set -# CONFIG_BOARDCTL_IOCTL is not set - -# -# RTOS Features -# -CONFIG_DISABLE_OS_API=y -# CONFIG_DISABLE_POSIX_TIMERS is not set -# CONFIG_DISABLE_PTHREAD is not set -# CONFIG_DISABLE_SIGNALS is not set -# CONFIG_DISABLE_MQUEUE is not set -# CONFIG_DISABLE_ENVIRON is not set - -# -# Clocks and Timers -# -CONFIG_USEC_PER_TICK=10000 -# CONFIG_SYSTEM_TIME64 is not set -# CONFIG_CLOCK_MONOTONIC is not set -# CONFIG_JULIAN_TIME is not set -CONFIG_START_YEAR=2013 -CONFIG_START_MONTH=1 -CONFIG_START_DAY=1 -CONFIG_MAX_WDOGPARMS=2 -CONFIG_PREALLOC_WDOGS=8 -CONFIG_WDOG_INTRESERVE=1 -CONFIG_PREALLOC_TIMERS=4 - -# -# Tasks and Scheduling -# -# CONFIG_INIT_NONE is not set -CONFIG_INIT_ENTRYPOINT=y -# CONFIG_INIT_FILEPATH is not set -CONFIG_USER_ENTRYPOINT="nsh_main" -CONFIG_RR_INTERVAL=200 -# CONFIG_SCHED_SPORADIC is not set -CONFIG_TASK_NAME_SIZE=0 -CONFIG_MAX_TASKS=16 -# CONFIG_SCHED_HAVE_PARENT is not set -CONFIG_SCHED_WAITPID=y - -# -# Pthread Options -# -# CONFIG_MUTEX_TYPES is not set -CONFIG_NPTHREAD_KEYS=4 - -# -# Performance Monitoring -# -# CONFIG_SCHED_CPULOAD is not set -# CONFIG_SCHED_INSTRUMENTATION is not set - -# -# Files and I/O -# -# CONFIG_DEV_CONSOLE is not set -# CONFIG_FDCLONE_DISABLE is not set -# CONFIG_FDCLONE_STDIO is not set -CONFIG_SDCLONE_DISABLE=y -CONFIG_NFILE_DESCRIPTORS=8 -CONFIG_NFILE_STREAMS=8 -CONFIG_NAME_MAX=32 -# CONFIG_PRIORITY_INHERITANCE is not set - -# -# RTOS hooks -# -CONFIG_BOARD_INITIALIZE=y -# CONFIG_BOARD_INITTHREAD is not set -# CONFIG_SCHED_STARTHOOK is not set -# CONFIG_SCHED_ATEXIT is not set -# CONFIG_SCHED_ONEXIT is not set - -# -# Signal Numbers -# -CONFIG_SIG_SIGUSR1=1 -CONFIG_SIG_SIGUSR2=2 -CONFIG_SIG_SIGALARM=3 -CONFIG_SIG_SIGCONDTIMEDOUT=16 -CONFIG_SIG_SIGWORK=17 - -# -# POSIX Message Queue Options -# -CONFIG_PREALLOC_MQ_MSGS=4 -CONFIG_MQ_MAXMSGSIZE=32 -# CONFIG_MODULE is not set - -# -# Work queue support -# -CONFIG_SCHED_WORKQUEUE=y -CONFIG_SCHED_HPWORK=y -CONFIG_SCHED_HPWORKPRIORITY=192 -CONFIG_SCHED_HPWORKPERIOD=50000 -CONFIG_SCHED_HPWORKSTACKSIZE=2048 -# CONFIG_SCHED_LPWORK is not set - -# -# Stack and heap information -# -CONFIG_IDLETHREAD_STACKSIZE=1024 -CONFIG_USERMAIN_STACKSIZE=2048 -CONFIG_PTHREAD_STACK_MIN=256 -CONFIG_PTHREAD_STACK_DEFAULT=2048 -# CONFIG_LIB_SYSCALL is not set - -# -# Device Drivers -# -CONFIG_DISABLE_POLL=y -CONFIG_DEV_NULL=y -# CONFIG_DEV_ZERO is not set -# CONFIG_DEV_LOOP is not set - -# -# Buffering -# -# CONFIG_DRVR_WRITEBUFFER is not set -# CONFIG_DRVR_READAHEAD is not set -# CONFIG_RAMDISK is not set -CONFIG_CAN=y -# CONFIG_CAN_FD is not set -CONFIG_CAN_FIFOSIZE=8 -CONFIG_CAN_NPENDINGRTR=4 -# CONFIG_CAN_TXREADY is not set -# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set -# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set -# CONFIG_PWM is not set -CONFIG_ARCH_HAVE_I2CRESET=y -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_I2S is not set - -# -# Timer Driver Support -# -# CONFIG_TIMER is not set -# CONFIG_RTC is not set -# CONFIG_WATCHDOG is not set -CONFIG_ANALOG=y -CONFIG_ADC=y -CONFIG_ADC_FIFOSIZE=8 -# CONFIG_ADC_NO_STARTUP_CONV is not set -# CONFIG_ADC_ADS125X is not set -# CONFIG_ADC_PGA11X is not set -# CONFIG_DAC is not set -# CONFIG_AUDIO_DEVICES is not set -# CONFIG_VIDEO_DEVICES is not set -# CONFIG_BCH is not set -# CONFIG_INPUT is not set -# CONFIG_IOEXPANDER is not set -# CONFIG_LCD is not set - -# -# LED Support -# -# CONFIG_USERLED is not set -# CONFIG_PCA9635PW is not set -# CONFIG_MMCSD is not set -# CONFIG_MTD is not set -# CONFIG_EEPROM is not set -# CONFIG_PIPES is not set -# CONFIG_PM is not set -# CONFIG_POWER is not set -# CONFIG_SENSORS is not set -# CONFIG_SERCOMM_CONSOLE is not set -CONFIG_SERIAL=y -CONFIG_SERIAL_REMOVABLE=y -# CONFIG_16550_UART is not set -# CONFIG_ARCH_HAVE_UART is not set -# CONFIG_ARCH_HAVE_UART0 is not set -# CONFIG_ARCH_HAVE_UART1 is not set -# CONFIG_ARCH_HAVE_UART2 is not set -# CONFIG_ARCH_HAVE_UART3 is not set -# CONFIG_ARCH_HAVE_UART4 is not set -# CONFIG_ARCH_HAVE_UART5 is not set -# CONFIG_ARCH_HAVE_UART6 is not set -# CONFIG_ARCH_HAVE_UART7 is not set -# CONFIG_ARCH_HAVE_UART8 is not set -# CONFIG_ARCH_HAVE_SCI0 is not set -# CONFIG_ARCH_HAVE_SCI1 is not set -# CONFIG_ARCH_HAVE_USART0 is not set -# CONFIG_ARCH_HAVE_USART1 is not set -CONFIG_ARCH_HAVE_USART2=y -# CONFIG_ARCH_HAVE_USART3 is not set -# CONFIG_ARCH_HAVE_USART4 is not set -# CONFIG_ARCH_HAVE_USART5 is not set -# CONFIG_ARCH_HAVE_USART6 is not set -# CONFIG_ARCH_HAVE_USART7 is not set -# CONFIG_ARCH_HAVE_USART8 is not set -# CONFIG_ARCH_HAVE_OTHER_UART is not set - -# -# USART Configuration -# -CONFIG_USART2_ISUART=y -CONFIG_MCU_SERIAL=y -CONFIG_STANDARD_SERIAL=y -# CONFIG_SERIAL_IFLOWCONTROL is not set -# CONFIG_SERIAL_OFLOWCONTROL is not set -# CONFIG_SERIAL_DMA is not set -CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y -# CONFIG_USART2_SERIAL_CONSOLE is not set -# CONFIG_OTHER_SERIAL_CONSOLE is not set -CONFIG_NO_SERIAL_CONSOLE=y - -# -# USART2 Configuration -# -CONFIG_USART2_RXBUFSIZE=256 -CONFIG_USART2_TXBUFSIZE=256 -CONFIG_USART2_BAUD=115200 -CONFIG_USART2_BITS=8 -CONFIG_USART2_PARITY=0 -CONFIG_USART2_2STOP=0 -# CONFIG_USART2_IFLOWCONTROL is not set -# CONFIG_USART2_OFLOWCONTROL is not set -# CONFIG_USART2_DMA is not set -CONFIG_USBDEV=y - -# -# USB Device Controller Driver Options -# -# CONFIG_USBDEV_ISOCHRONOUS is not set -# CONFIG_USBDEV_DUALSPEED is not set -CONFIG_USBDEV_SELFPOWERED=y -# CONFIG_USBDEV_BUSPOWERED is not set -CONFIG_USBDEV_MAXPOWER=100 -# CONFIG_USBDEV_DMA is not set -# CONFIG_ARCH_USBDEV_STALLQUEUE is not set -# CONFIG_USBDEV_TRACE is not set - -# -# USB Device Class Driver Options -# -# CONFIG_USBDEV_COMPOSITE is not set -# CONFIG_PL2303 is not set -CONFIG_CDCACM=y -CONFIG_CDCACM_CONSOLE=y -CONFIG_CDCACM_EP0MAXPACKET=64 -CONFIG_CDCACM_EPINTIN=1 -CONFIG_CDCACM_EPINTIN_FSSIZE=64 -CONFIG_CDCACM_EPINTIN_HSSIZE=64 -CONFIG_CDCACM_EPBULKOUT=3 -CONFIG_CDCACM_EPBULKOUT_FSSIZE=64 -CONFIG_CDCACM_EPBULKOUT_HSSIZE=512 -CONFIG_CDCACM_EPBULKIN=2 -CONFIG_CDCACM_EPBULKIN_FSSIZE=64 -CONFIG_CDCACM_EPBULKIN_HSSIZE=512 -CONFIG_CDCACM_NWRREQS=4 -CONFIG_CDCACM_NRDREQS=4 -CONFIG_CDCACM_BULKIN_REQLEN=96 -CONFIG_CDCACM_RXBUFSIZE=256 -CONFIG_CDCACM_TXBUFSIZE=256 -CONFIG_CDCACM_VENDORID=0x0525 -CONFIG_CDCACM_PRODUCTID=0xa4a7 -CONFIG_CDCACM_VENDORSTR="NuttX" -CONFIG_CDCACM_PRODUCTSTR="CDC/ACM Serial" -# CONFIG_USBMSC is not set -# CONFIG_USBHOST is not set -# CONFIG_WIRELESS is not set - -# -# System Logging Device Options -# - -# -# System Logging -# -# CONFIG_RAMLOG is not set - -# -# Networking Support -# -# CONFIG_ARCH_HAVE_NET is not set -# CONFIG_ARCH_HAVE_PHY is not set -# CONFIG_NET is not set - -# -# Crypto API -# -# CONFIG_CRYPTO is not set - -# -# File Systems -# - -# -# File system configuration -# -# CONFIG_DISABLE_MOUNTPOINT is not set -# CONFIG_FS_AUTOMOUNTER is not set -# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set -# CONFIG_FS_READABLE is not set -# CONFIG_FS_WRITABLE is not set -# CONFIG_FS_NAMED_SEMAPHORES is not set -CONFIG_FS_MQUEUE_MPATH="/var/mqueue" -# CONFIG_FS_RAMMAP is not set -# CONFIG_FS_FAT is not set -# CONFIG_FS_NXFFS is not set -# CONFIG_FS_ROMFS is not set -# CONFIG_FS_TMPFS is not set -# CONFIG_FS_SMARTFS is not set -# CONFIG_FS_BINFS is not set -# CONFIG_FS_PROCFS is not set -# CONFIG_FS_UNIONFS is not set - -# -# System Logging -# -# CONFIG_SYSLOG is not set -# CONFIG_SYSLOG_TIMESTAMP is not set - -# -# Graphics Support -# -# CONFIG_NX is not set - -# -# Memory Management -# -# CONFIG_MM_SMALL is not set -CONFIG_MM_REGIONS=2 -# CONFIG_ARCH_HAVE_HEAP2 is not set -# CONFIG_GRAN is not set - -# -# Audio Support -# -# CONFIG_AUDIO is not set - -# -# Binary Loader -# -# CONFIG_BINFMT_DISABLE is not set -# CONFIG_BINFMT_EXEPATH is not set -# CONFIG_NXFLAT is not set -# CONFIG_ELF is not set -CONFIG_BUILTIN=y -# CONFIG_PIC is not set -# CONFIG_SYMTAB_ORDEREDBYNAME is not set - -# -# Library Routines -# - -# -# Standard C Library Options -# -CONFIG_STDIO_BUFFER_SIZE=64 -CONFIG_STDIO_LINEBUFFER=y -CONFIG_NUNGET_CHARS=2 -CONFIG_LIB_HOMEDIR="/" -# CONFIG_LIBM is not set -# CONFIG_NOPRINTF_FIELDWIDTH is not set -# CONFIG_LIBC_FLOATINGPOINT is not set -CONFIG_LIBC_LONG_LONG=y -# CONFIG_LIBC_IOCTL_VARIADIC is not set -CONFIG_LIB_RAND_ORDER=1 -# CONFIG_EOL_IS_CR is not set -# CONFIG_EOL_IS_LF is not set -# CONFIG_EOL_IS_BOTH_CRLF is not set -CONFIG_EOL_IS_EITHER_CRLF=y -# CONFIG_LIBC_EXECFUNCS is not set -CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 -CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 -# CONFIG_LIBC_STRERROR is not set -# CONFIG_LIBC_PERROR_STDOUT is not set -CONFIG_ARCH_LOWPUTC=y -# CONFIG_LIBC_LOCALTIME is not set -# CONFIG_TIME_EXTENDED is not set -CONFIG_LIB_SENDFILE_BUFSIZE=512 -# CONFIG_ARCH_ROMGETC is not set -# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set -# CONFIG_LIBC_NETDB is not set - -# -# Non-standard Library Support -# -# CONFIG_LIB_KBDCODEC is not set -# CONFIG_LIB_SLCDCODEC is not set - -# -# Basic CXX Support -# -# CONFIG_C99_BOOL8 is not set -CONFIG_HAVE_CXX=y -CONFIG_HAVE_CXXINITIALIZE=y -# CONFIG_CXX_NEWLONG is not set - -# -# uClibc++ Standard C++ Library -# -# CONFIG_UCLIBCXX is not set - -# -# Application Configuration -# - -# -# Built-In Applications -# -CONFIG_BUILTIN_PROXY_STACKSIZE=1024 - -# -# CAN Utilities -# - -# -# Examples -# -CONFIG_EXAMPLES_ADC=y -CONFIG_EXAMPLES_ADC_DEVPATH="/dev/adc0" -CONFIG_EXAMPLES_ADC_GROUPSIZE=4 -# CONFIG_EXAMPLES_ADC_SWTRIG is not set -# CONFIG_EXAMPLES_BUTTONS is not set -# CONFIG_EXAMPLES_CONFIGDATA is not set -# CONFIG_EXAMPLES_CPUHOG is not set -# CONFIG_EXAMPLES_CXXTEST is not set -# CONFIG_EXAMPLES_DHCPD is not set -# CONFIG_EXAMPLES_ELF is not set -# CONFIG_EXAMPLES_FTPC is not set -# CONFIG_EXAMPLES_FTPD is not set -# CONFIG_EXAMPLES_HELLO is not set -# CONFIG_EXAMPLES_HELLOXX is not set -# CONFIG_EXAMPLES_JSON is not set -# CONFIG_EXAMPLES_HIDKBD is not set -# CONFIG_EXAMPLES_KEYPADTEST is not set -# CONFIG_EXAMPLES_IGMP is not set -# CONFIG_EXAMPLES_MEDIA is not set -# CONFIG_EXAMPLES_MM is not set -# CONFIG_EXAMPLES_MODBUS is not set -# CONFIG_EXAMPLES_MOUNT is not set -# CONFIG_EXAMPLES_NRF24L01TERM is not set -CONFIG_EXAMPLES_NSH=y -CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y -# CONFIG_EXAMPLES_NULL is not set -# CONFIG_EXAMPLES_NX is not set -# CONFIG_EXAMPLES_NXTERM is not set -# CONFIG_EXAMPLES_NXFFS is not set -# CONFIG_EXAMPLES_NXHELLO is not set -# CONFIG_EXAMPLES_NXIMAGE is not set -# CONFIG_EXAMPLES_NXLINES is not set -# CONFIG_EXAMPLES_NXTEXT is not set -# CONFIG_EXAMPLES_OSTEST is not set -# CONFIG_EXAMPLES_PIPE is not set -# CONFIG_EXAMPLES_PPPD is not set -# CONFIG_EXAMPLES_POSIXSPAWN is not set -# CONFIG_EXAMPLES_QENCODER is not set -# CONFIG_EXAMPLES_RGMP is not set -# CONFIG_EXAMPLES_SENDMAIL is not set -# CONFIG_EXAMPLES_SERIALBLASTER is not set -# CONFIG_EXAMPLES_SERIALRX is not set -# CONFIG_EXAMPLES_SERLOOP is not set -# CONFIG_EXAMPLES_SLCD is not set -# CONFIG_EXAMPLES_SMART_TEST is not set -# CONFIG_EXAMPLES_SMART is not set -# CONFIG_EXAMPLES_TCPECHO is not set -# CONFIG_EXAMPLES_TELNETD is not set -# CONFIG_EXAMPLES_TIFF is not set -# CONFIG_EXAMPLES_TOUCHSCREEN is not set -# CONFIG_EXAMPLES_WEBSERVER is not set -# CONFIG_EXAMPLES_USBSERIAL is not set -# CONFIG_EXAMPLES_USBTERM is not set -# CONFIG_EXAMPLES_WATCHDOG is not set - -# -# File System Utilities -# - -# -# Graphics Support -# -# CONFIG_TIFF is not set -# CONFIG_GRAPHICS_TRAVELER is not set - -# -# Interpreters -# -# CONFIG_INTERPRETERS_FICL is not set -# CONFIG_INTERPRETERS_PCODE is not set -# CONFIG_INTERPRETERS_MICROPYTHON is not set - -# -# FreeModBus -# -# CONFIG_MODBUS is not set - -# -# Network Utilities -# -# CONFIG_NETUTILS_CODECS is not set -# CONFIG_NETUTILS_FTPC is not set -# CONFIG_NETUTILS_JSON is not set -# CONFIG_NETUTILS_SMTP is not set - -# -# NSH Library -# -CONFIG_NSH_LIBRARY=y - -# -# Command Line Configuration -# -CONFIG_NSH_READLINE=y -# CONFIG_NSH_CLE is not set -CONFIG_NSH_LINELEN=64 -# CONFIG_NSH_DISABLE_SEMICOLON is not set -CONFIG_NSH_CMDPARMS=y -CONFIG_NSH_MAXARGUMENTS=6 -CONFIG_NSH_ARGCAT=y -CONFIG_NSH_NESTDEPTH=3 -# CONFIG_NSH_DISABLEBG is not set -CONFIG_NSH_BUILTIN_APPS=y - -# -# Disable Individual commands -# -# CONFIG_NSH_DISABLE_ADDROUTE is not set -# CONFIG_NSH_DISABLE_BASENAME is not set -# CONFIG_NSH_DISABLE_CAT is not set -# CONFIG_NSH_DISABLE_CD is not set -# CONFIG_NSH_DISABLE_CP is not set -# CONFIG_NSH_DISABLE_CMP is not set -CONFIG_NSH_DISABLE_DATE=y -# CONFIG_NSH_DISABLE_DD is not set -# CONFIG_NSH_DISABLE_DF is not set -# CONFIG_NSH_DISABLE_DELROUTE is not set -# CONFIG_NSH_DISABLE_DIRNAME is not set -# CONFIG_NSH_DISABLE_ECHO is not set -# CONFIG_NSH_DISABLE_EXEC is not set -# CONFIG_NSH_DISABLE_EXIT is not set -# CONFIG_NSH_DISABLE_FREE is not set -CONFIG_NSH_DISABLE_GET=y -# CONFIG_NSH_DISABLE_HELP is not set -# CONFIG_NSH_DISABLE_HEXDUMP is not set -# CONFIG_NSH_DISABLE_IFCONFIG is not set -CONFIG_NSH_DISABLE_IFUPDOWN=y -# CONFIG_NSH_DISABLE_KILL is not set -# CONFIG_NSH_DISABLE_LOSETUP is not set -CONFIG_NSH_DISABLE_LOSMART=y -# CONFIG_NSH_DISABLE_LS is not set -# CONFIG_NSH_DISABLE_MB is not set -# CONFIG_NSH_DISABLE_MKDIR is not set -# CONFIG_NSH_DISABLE_MKFIFO is not set -# CONFIG_NSH_DISABLE_MKRD is not set -# CONFIG_NSH_DISABLE_MH is not set -# CONFIG_NSH_DISABLE_MOUNT is not set -# CONFIG_NSH_DISABLE_MV is not set -# CONFIG_NSH_DISABLE_MW is not set -# CONFIG_NSH_DISABLE_PS is not set -CONFIG_NSH_DISABLE_PUT=y -# CONFIG_NSH_DISABLE_PWD is not set -# CONFIG_NSH_DISABLE_RM is not set -# CONFIG_NSH_DISABLE_RMDIR is not set -# CONFIG_NSH_DISABLE_SET is not set -# CONFIG_NSH_DISABLE_SH is not set -# CONFIG_NSH_DISABLE_SLEEP is not set -# CONFIG_NSH_DISABLE_TEST is not set -# CONFIG_NSH_DISABLE_UMOUNT is not set -# CONFIG_NSH_DISABLE_UNAME is not set -# CONFIG_NSH_DISABLE_UNSET is not set -# CONFIG_NSH_DISABLE_USLEEP is not set -CONFIG_NSH_DISABLE_WGET=y -# CONFIG_NSH_DISABLE_XD is not set - -# -# Configure Command Options -# -# CONFIG_NSH_CMDOPT_DF_H is not set -CONFIG_NSH_CODECS_BUFSIZE=128 -CONFIG_NSH_CMDOPT_HEXDUMP=y -CONFIG_NSH_FILEIOSIZE=512 - -# -# Scripting Support -# -# CONFIG_NSH_DISABLESCRIPT is not set -# CONFIG_NSH_DISABLE_ITEF is not set -# CONFIG_NSH_DISABLE_LOOPS is not set - -# -# Console Configuration -# -CONFIG_NSH_CONSOLE=y -# CONFIG_NSH_USBCONSOLE is not set -# CONFIG_NSH_ALTCONDEV is not set -# CONFIG_NSH_ARCHINIT is not set - -# -# NxWidgets/NxWM -# - -# -# Platform-specific Support -# -# CONFIG_PLATFORM_CONFIGDATA is not set - -# -# System Libraries and NSH Add-Ons -# -# CONFIG_SYSTEM_FREE is not set -# CONFIG_SYSTEM_CLE is not set -# CONFIG_SYSTEM_CUTERM is not set -# CONFIG_SYSTEM_INSTALL is not set -# CONFIG_SYSTEM_HEX2BIN is not set -# CONFIG_SYSTEM_INIFILE is not set -# CONFIG_SYSTEM_HEXED is not set -# CONFIG_SYSTEM_RAMTEST is not set -CONFIG_READLINE_HAVE_EXTMATCH=y -CONFIG_SYSTEM_READLINE=y -CONFIG_READLINE_ECHO=y -# CONFIG_READLINE_TABCOMPLETION is not set -# CONFIG_READLINE_CMD_HISTORY is not set -# CONFIG_SYSTEM_RAMTRON is not set -# CONFIG_SYSTEM_SDCARD is not set -# CONFIG_SYSTEM_SUDOKU is not set -# CONFIG_SYSTEM_VI is not set -# CONFIG_SYSTEM_CDCACM is not set -# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/olimex-stm32-h407/nshusb/setenv.sh b/configs/olimex-stm32-h407/nshusb/setenv.sh deleted file mode 100644 index c131d3b334..0000000000 --- a/configs/olimex-stm32-h407/nshusb/setenv.sh +++ /dev/null @@ -1,75 +0,0 @@ -#!/bin/bash -# configs/olimex-stm32-h407/nshusb/setenv.sh -# -# Copyright (C) 2014 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# - -if [ "$_" = "$0" ] ; then - echo "You must source this script, not run it!" 1>&2 - exit 1 -fi - -WD=`pwd` -if [ ! -x "setenv.sh" ]; then - echo "This script must be executed from the top-level NuttX build directory" - exit 1 -fi - -if [ -z "${PATH_ORIG}" ]; then - export PATH_ORIG="${PATH}" -fi - -# This is the Cygwin path to the location where I installed the RIDE -# toolchain under windows. You will also have to edit this if you install -# the RIDE toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin" - -# This is the Cygwin path to the location where I installed the CodeSourcery -# toolchain under windows. You will also have to edit this if you install -# the CodeSourcery toolchain in any other location -#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" - -# These are the Cygwin paths to the locations where I installed the Atollic -# toolchain under windows. You will also have to edit this if you install -# the Atollic toolchain in any other location. /usr/bin is added before -# the Atollic bin path because there is are binaries named gcc.exe and g++.exe -# at those locations as well. -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" -#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" - -# This is the Cygwin path to the location where I build the buildroot -# toolchain. -export TOOLCHAIN_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin" - -# Add the path to the toolchain to the PATH varialble -export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" - -echo "PATH : ${PATH}"