From dff01c3166d822441c9c9ea94f4c4e17084d7ef8 Mon Sep 17 00:00:00 2001 From: Gregory Nutt Date: Sat, 14 Jun 2014 13:11:42 -0600 Subject: [PATCH] SAMA5D4-EK: Add an SDRAM test configuration --- configs/sama5d4-ek/README.txt | 154 ++--- configs/sama5d4-ek/ramtest/Make.defs | 126 ++++ configs/sama5d4-ek/ramtest/defconfig | 896 +++++++++++++++++++++++++++ configs/sama5d4-ek/ramtest/setenv.sh | 76 +++ 4 files changed, 1145 insertions(+), 107 deletions(-) create mode 100644 configs/sama5d4-ek/ramtest/Make.defs create mode 100644 configs/sama5d4-ek/ramtest/defconfig create mode 100755 configs/sama5d4-ek/ramtest/setenv.sh diff --git a/configs/sama5d4-ek/README.txt b/configs/sama5d4-ek/README.txt index 360576ae45..b9515c76b4 100644 --- a/configs/sama5d4-ek/README.txt +++ b/configs/sama5d4-ek/README.txt @@ -75,7 +75,6 @@ Contents - SDRAM Support - NAND Support - I2C Tool - - CAN Usage - SAMA5 ADC Support - SAMA5 PWM Support - RTC @@ -2170,90 +2169,6 @@ I2C Tool Address 0x1a is the WM8904. Address 0x39 is the SIL9022A. I am not sure what is at address 0x3d and 0x60 -CAN Usage -========= - I planned to verify CAN using the IXXAT USB-to-CAN Compact. This section - provides miscellaneous CAN-related notes, mostly to myself but perhaps of - interest to others. - - [Unfortunately, as of this writing, I still do not have a proper CAN test - bed to verify the CAN driver.] - - CAN Configuration - ----------------- - - The following steps illustrate how to enable CAN0 and/or CAN1 in the NuttX - configuration: - - System Type -> SAMA5 Peripheral Support - CONFIG_SAMA5_CAN0=y : Select CAN0 and/or CAN1 - CONFIG_SAMA5_CAN1=y - - Device Drivers -> CAN Driver Support - CONFIG_CAN=y : (Automatically selected) - CONFIG_CAN_EXTID=y : For extended, 29-bit CAN IDs - - System Type -> CAN Drive Support - CONFIG_SAMA5_CAN0_BAUD=250000 : Select some BAUD for CAN0 (if enabled) - CONFIG_SAMA5_CAN0_NRECVMB=1 : Select number of receive mailboxes (see below) - CONFIG_SAMA5_CAN1_BAUD=250000 : Select some BAUD for CAN1 (if enabled) - CONFIG_SAMA5_CAN1_NRECVMB=1 : Select number of receive mailboxes (see below) - - Receive Mailboxes and Address Filtering - --------------------------------------- - - The SAMA5 CAN0 peripheral supports 8 mailboxes that can be used for sending - and receiving messages. Note that the number of dedicated receive mailboxes - (CONFIG_SAMA5_CANn_NRECVMB) was set to one in the above configuration. This - could be set to any value from 1 to 3 (the upper limit of 3 is purely - arbrary and can be increased with some minor code enhancement). The - remainder can be configured dynamically to send CAN messages. - - Why would you want to use more than one receive mailbox? There are two - reasons. Multiple receive mailboxes might needed to either (1) receive - bursts of messages, or (2) to support multiple groups of messages filtered - on message ID. - - You must also specify the address filtering for each dedicated receive mailbox: - - System Type -> CAN Drive Support - CONFIG_SAMA5_CAN0_ADDR0 and CONFIG_SAMA5_CAN0_MASK0 : If CONFIG_SAMA5_CAN0_NRECVMB >= 1 - CONFIG_SAMA5_CAN0_ADDR1 and CONFIG_SAMA5_CAN0_MASK1 : If CONFIG_SAMA5_CAN0_NRECVMB >= 2 - CONFIG_SAMA5_CAN0_ADDR2 and CONFIG_SAMA5_CAN0_MASK2 : If CONFIG_SAMA5_CAN0_NRECVMB >= 3 - CONFIG_SAMA5_CAN1_ADDR0 and CONFIG_SAMA5_CAN1_MASK0 : If CONFIG_SAMA5_CAN1_NRECVMB >= 1 - CONFIG_SAMA5_CAN1_ADDR1 and CONFIG_SAMA5_CAN1_MASK1 : If CONFIG_SAMA5_CAN1_NRECVMB >= 2 - CONFIG_SAMA5_CAN1_ADDR2 and CONFIG_SAMA5_CAN1_MASK2 : If CONFIG_SAMA5_CAN1_NRECVMB >= 3 - - Only messages that have IDs that match the CONFIG_SAMA5_CANn_ADDRn when both - the received and the configured address are masked by CONFIG_SAMA5_CANn_MASKn - will be accepted. For example, if the mask is all ones, then only messasges - with exact address matches will be accepted; if the mask is all zeroes than - any address will be accepted. - - CAN connectors - -------------- - - CAN1 and CAN2 are available via RJ-11 connectors on the SAMA4D4-EK. Each - is wired as follows. Also shown below is the matching pins if you want connect - the CAN to a device that uses an DB-9 connector (Such as the IXXAT USB-to-CAN - Compact). Both connector types (as well as RJ-45) are common. - - +----------+ RJ-11 DB-9 - | O | ----------- -------------- - +------------+ | | Pin 1 3v3 Pin 1 N/C - | +--+ | | o5 | Pin 2 5v Pin 2 CANL - | | | | | o9 | Pin 3 N/C Pin 3 GND - | +-+ +-+ | | o4 | Pin 4 CANL Pin 4 N/C - | | | | | o8 | Pin 5 CANH Pin 5 N/C - | |654321| | | o3 | Pin 6 N/C Pin 6 N/C - | |oooooo| | | o7 | Pin 7 CANH - | +------+ | | o2 | Pin 8 N/C - +------------+ | o6 | Pin 9 CANV+ (N/C on IXXAT) RJ-11 Female | x1 | - | | - | O | - +----------+ - DB-9 Male - SAMA5 ADC Support ================= @@ -2721,8 +2636,6 @@ SAMA4D4-EK Configuration Options CONFIG_SAMA5_ISI - Image Sensor Interface CONFIG_SAMA5_SSC0 - Synchronous Serial Controller 0 CONFIG_SAMA5_SSC1 - Synchronous Serial Controller 1 - CONFIG_SAMA5_CAN0 - CAN controller 0 - CONFIG_SAMA5_CAN1 - CAN controller 1 CONFIG_SAMA5_SHA - Secure Hash Algorithm CONFIG_SAMA5_AES - Advanced Encryption Standard CONFIG_SAMA5_TDES - Triple Data Encryption Standard @@ -2900,6 +2813,10 @@ Configurations demo configuration. The nsh configuration is, however, bare bones. It is the simplest possible NSH configuration and is useful as a platform for debugging and integrating new features in isolation. + ramtest: This is a stripped down version of NSH that runs out of + internal SRAM. It configures SDRAM and supports only the RAM test + at apps/examples/ramtest. This configuration is useful for + bringing up SDRAM. There may be issues with some of these configurations. See the details before of the status of individual configurations. @@ -2908,15 +2825,13 @@ Configurations nsh: - This configuration directory provide the NuttShell (NSH). There are - two NSH configurations: nsh and demo. The difference is that nsh is - intended to be a very simple NSH configuration upon which you can build - further functionality. The demo configuration, on the other hand, is - intended to be a rich configuration that shows many features all working - together. + This configuration directory provide the NuttShell (NSH). This is a + very simple NSH configuration upon which you can build further + functionality. NOTES: - 1. This configuration uses the default DBGU serial console. That + 1. This configuration uses the the USART3 for the serial console + which is available at the "DBGU" RS-232 connector (J24). That is easily changed by reconfiguring to (1) enable a different serial peripheral, and (2) selecting that serial peripheral as the console device. @@ -2950,11 +2865,11 @@ Configurations 4. This configuration has support for NSH built-in applications enabled. However, no built-in applications are selected in the base configuration. - 5. This configuration has support for the FAT file system built in. However, - by default, there are no block drivers initialized. The FAT file system can - still be used to create RAM disks. + 5. This configuration has support for the FAT file system built in. + However, by default, there are no block drivers initialized. The FAT + file system can still be used to create RAM disks. - 6. The SAMA5D4-EK includes for an At25 serial DataFlash. Support for that + 6. The SAMA5D4-EK includes for an AT25 serial DataFlash. Support for that serial FLASH can be enabled by modifying the NuttX configuration as described above in the paragraph entitled "AT25 Serial FLASH". @@ -2992,14 +2907,42 @@ Configurations that it provides /dev/random. See the section entitled "TRNG and /dev/random" above for detailed configuration information. - 16. See also the sections above for additional configuration options: - "CAN Usage", "SAMA5 ADC Support", "SAMA5 PWM Support", "I2S Audio - Support" - STATUS: See the To-Do list below - 2014-4-3: Delay loop calibrated: CONFIG_BOARD_LOOPSPERMSEC=65775 + ramtest + This is a stripped down version of NSH that runs out of + internal SRAM. It configures SDRAM and supports only the RAM test + at apps/examples/ramtest. This configuration is useful for + bringing up SDRAM. + + NOTES: + 1. This configuration uses the the USART3 for the serial console + which is available at the "DBGU" RS-232 connector (J24). That + is easily changed by reconfiguring to (1) enable a different + serial peripheral, and (2) selecting that serial peripheral as + the console device. + + 2. By default, this configuration is set up to build on Windows + under either a Cygwin or MSYS environment using a recent, Windows- + native, generic ARM EABI GCC toolchain (such as the CodeSourcery + toolchain). Both the build environment and the toolchain + selection can easily be changed by reconfiguring: + + CONFIG_HOST_WINDOWS=y : Windows operating system + CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows + CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows + + If you are running on Linux, make *certain* that you have + CONFIG_HOST_LINUX=y *before* the first make or you will create a + corrupt configuration that may not be easy to recover from. See + the warning in the section "Information Common to All Configurations" + for further information. + + 3. This configuration executes out of internal SRAM flash and is + loaded into SRAM by the boot ROM SDRAM from NAND, Serial + DataFlash, SD card or from a TFTPC sever via the Boot ROM. + Data also is positioned in SDRAM. To-Do List ========== @@ -3010,10 +2953,7 @@ To-Do List 2) HSCMI TX DMA support is currently commented out. -3) GMAC has only been tested on a 10/100Base-T network. I don't have a - 1000Base-T network to support additional testing. - -4) Some drivers may require some adjustments if you intend to run from SDRAM. +3) Some drivers may require some adjustments if you intend to run from SDRAM. That is because in this case macros like BOARD_MCK_FREQUENCY are not constants but are instead function calls: The MCK clock frequency is not known in advance but instead has to be calculated from the bootloader PLL configuration. diff --git a/configs/sama5d4-ek/ramtest/Make.defs b/configs/sama5d4-ek/ramtest/Make.defs new file mode 100644 index 0000000000..023c81daaf --- /dev/null +++ b/configs/sama5d4-ek/ramtest/Make.defs @@ -0,0 +1,126 @@ +############################################################################ +# configs/sama5d4-ek/ramtest/Make.defs +# +# Copyright (C) 2014 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs + +ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y) + LDSCRIPT = isram.ld +endif + +ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y) + LDSCRIPT = ddram.ld +endif + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx + ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(ARCROSSDEV)ar rcs +NM = $(ARCROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16 +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = +ifeq ($(CONFIG_HOST_WINDOWS),y) + HOSTEXEEXT = .exe +else + HOSTEXEEXT = +endif + +ifeq ($(WINTOOL),y) + # Windows-native host tools + DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh + DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh + MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh +else + # Linux/Cygwin-native host tools + MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT) +endif + diff --git a/configs/sama5d4-ek/ramtest/defconfig b/configs/sama5d4-ek/ramtest/defconfig new file mode 100644 index 0000000000..1e13336aa5 --- /dev/null +++ b/configs/sama5d4-ek/ramtest/defconfig @@ -0,0 +1,896 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options +# +# CONFIG_DEBUG is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +CONFIG_ARCH_CHIP_SAMA5=y +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM3 is not set +# CONFIG_ARCH_CORTEXM4 is not set +CONFIG_ARCH_CORTEXA5=y +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="armv7-a" +CONFIG_ARCH_CHIP="sama5" +CONFIG_ARCH_HAVE_FPU=y +CONFIG_ARCH_FPU=y +# CONFIG_ARCH_HAVE_MPU is not set +CONFIG_ARCH_HAVE_LOWVECTORS=y +CONFIG_ARCH_LOWVECTORS=y +# CONFIG_ARCH_ROMPGTABLE is not set + +# +# ARMv7-A Configuration Options +# +# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set +CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y +# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set +# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set +# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set + +# +# SAMA5 Configuration Options +# +CONFIG_SAMA5_HAVE_AESB=y +CONFIG_SAMA5_HAVE_ICM=y +CONFIG_SAMA5_HAVE_UART0=y +CONFIG_SAMA5_HAVE_UART1=y +CONFIG_SAMA5_HAVE_USART4=y +# CONFIG_SAMA5_HAVE_CAN0 is not set +# CONFIG_SAMA5_HAVE_CAN1 is not set +# CONFIG_SAMA5_HAVE_DMA is not set +CONFIG_SAMA5_HAVE_DDR32=y +CONFIG_SAMA5_HAVE_XDMA=y +CONFIG_SAMA5_HAVE_L2CC=y +CONFIG_SAMA5_HAVE_LCDC=y +# CONFIG_SAMA5_HAVE_GMAC is not set +# CONFIG_SAMA5_HAVE_EMACA is not set +CONFIG_SAMA5_HAVE_EMACB=y +CONFIG_SAMA5_HAVE_EMAC1=y +# CONFIG_SAMA5_HAVE_HSMCI2 is not set +CONFIG_SAMA5_HAVE_SAIC=y +CONFIG_SAMA5_HAVE_SBM=y +CONFIG_SAMA5_HAVE_SFC=y +CONFIG_SAMA5_HAVE_SPI2=y +CONFIG_SAMA5_HAVE_TC1=y +CONFIG_SAMA5_HAVE_TC2=y +CONFIG_SAMA5_HAVE_TWI3=y +CONFIG_SAMA5_HAVE_VDEC=y +# CONFIG_ARCH_CHIP_SAMA5D3 is not set +CONFIG_ARCH_CHIP_SAMA5D4=y +# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D33 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D36 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D41 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D42 is not set +# CONFIG_ARCH_CHIP_ATSAMA5D43 is not set +CONFIG_ARCH_CHIP_ATSAMA5D44=y + +# +# SAMA5 Peripheral Support +# +# CONFIG_SAMA5_AES is not set +# CONFIG_SAMA5_TDES is not set +# CONFIG_SAMA5_AESB is not set +# CONFIG_SAMA5_DBGU is not set +# CONFIG_SAMA5_L2CC is not set +# CONFIG_SAMA5_PIT is not set +# CONFIG_SAMA5_WDT is not set +# CONFIG_SAMA5_RTC is not set +# CONFIG_SAMA5_ICM is not set +CONFIG_SAMA5_HSMC=y +# CONFIG_SAMA5_SMD is not set +# CONFIG_SAMA5_UART0 is not set +# CONFIG_SAMA5_UART1 is not set +# CONFIG_SAMA5_USART0 is not set +# CONFIG_SAMA5_USART1 is not set +# CONFIG_SAMA5_USART2 is not set +CONFIG_SAMA5_USART3=y +# CONFIG_SAMA5_USART4 is not set +# CONFIG_SAMA5_TWI0 is not set +# CONFIG_SAMA5_TWI1 is not set +# CONFIG_SAMA5_TWI2 is not set +# CONFIG_SAMA5_TWI3 is not set +# CONFIG_SAMA5_HSMCI0 is not set +# CONFIG_SAMA5_HSMCI1 is not set +# CONFIG_SAMA5_SBM is not set +# CONFIG_SAMA5_SFC is not set +# CONFIG_SAMA5_SPI0 is not set +# CONFIG_SAMA5_SPI1 is not set +# CONFIG_SAMA5_SPI2 is not set +# CONFIG_SAMA5_TC0 is not set +# CONFIG_SAMA5_TC1 is not set +# CONFIG_SAMA5_TC2 is not set +# CONFIG_SAMA5_PWM is not set +# CONFIG_SAMA5_ADC is not set +# CONFIG_SAMA5_XDMAC0 is not set +# CONFIG_SAMA5_XDMAC1 is not set +# CONFIG_SAMA5_UHPHS is not set +# CONFIG_SAMA5_UDPHS is not set +# CONFIG_SAMA5_EMACB is not set +# CONFIG_SAMA5_EMAC0 is not set +# CONFIG_SAMA5_EMAC1 is not set +# CONFIG_SAMA5_LCDC is not set +# CONFIG_SAMA5_ISI is not set +# CONFIG_SAMA5_SHA is not set +# CONFIG_SAMA5_TRNG is not set +# CONFIG_SAMA5_ARM is not set +# CONFIG_SAMA5_FUSE is not set +CONFIG_SAMA5_MPDDRC=y +# CONFIG_SAMA5_VDEC is not set +# CONFIG_SAMA5_PIO_IRQ is not set + +# +# External Memory Configuration +# +CONFIG_SAMA5_DDRCS=y +CONFIG_SAMA5_DDRCS_SIZE=26843456 +# CONFIG_SAMA5_DDRCS_LPDDR1 is not set +CONFIG_SAMA5_DDRCS_LPDDR2=y +# CONFIG_SAMA5_EBICS0 is not set +# CONFIG_SAMA5_EBICS1 is not set +# CONFIG_SAMA5_EBICS2 is not set +# CONFIG_SAMA5_EBICS3 is not set +# CONFIG_SAMA5_HAVE_NAND is not set +# CONFIG_SAMA5_HAVE_PMECC is not set +CONFIG_SAMA5_BOOT_ISRAM=y +# CONFIG_SAMA5_BOOT_SDRAM is not set + +# +# Heap Configuration +# +CONFIG_SAMA5_DDRCS_HEAP=y +CONFIG_SAMA5_DDRCS_HEAP_OFFSET=0 +CONFIG_SAMA5_DDRCS_HEAP_SIZE=0 + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +CONFIG_ARCH_HAVE_MMU=y +CONFIG_ARCH_NAND_HWECC=y +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_PAGING is not set +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +# CONFIG_ARCH_HAVE_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=65775 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +# CONFIG_ARCH_HAVE_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +# CONFIG_BOOT_RUNFROMFLASH is not set +CONFIG_BOOT_RUNFROMISRAM=y +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x00300000 +CONFIG_RAM_VSTART=0x00300000 +CONFIG_RAM_SIZE=114688 +CONFIG_ARCH_HAVE_SDRAM=y +# CONFIG_BOOT_SDRAM_DATA is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_SAMA5D4_EK=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="sama5d4-ek" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +# CONFIG_ARCH_BUTTONS is not set +CONFIG_ARCH_HAVE_IRQBUTTONS=y +CONFIG_NSH_MMCSDMINOR=0 + +# +# Board-Specific Options +# +# CONFIG_SAMA5D4EK_384MHZ is not set +CONFIG_SAMA5D4EK_396MHZ=y +# CONFIG_SAMA5D4EK_528MHZ is not set +CONFIG_SAMA5D4EK_MT47H128M16RT=y +# CONFIG_SAMA5D4EK_MT47H64M16HR is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +CONFIG_DISABLE_ENVIRON=y + +# +# Clocks and Timers +# +CONFIG_MSEC_PER_TICK=10 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2014 +CONFIG_START_MONTH=7 +CONFIG_START_DAY=31 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=16 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +CONFIG_TASK_NAME_SIZE=32 +CONFIG_MAX_TASK_ARGS=4 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_MUTEX_TYPES is not set +CONFIG_NPTHREAD_KEYS=4 + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +# CONFIG_BOARD_INITIALIZE is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_I2S is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_TIMER is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_16550_UART is not set +# CONFIG_ARCH_HAVE_UART is not set +# CONFIG_ARCH_HAVE_UART0 is not set +# CONFIG_ARCH_HAVE_UART1 is not set +# CONFIG_ARCH_HAVE_UART2 is not set +# CONFIG_ARCH_HAVE_UART3 is not set +# CONFIG_ARCH_HAVE_UART4 is not set +# CONFIG_ARCH_HAVE_UART5 is not set +# CONFIG_ARCH_HAVE_UART6 is not set +# CONFIG_ARCH_HAVE_UART7 is not set +# CONFIG_ARCH_HAVE_UART8 is not set +# CONFIG_ARCH_HAVE_SCI0 is not set +# CONFIG_ARCH_HAVE_SCI1 is not set +# CONFIG_ARCH_HAVE_USART0 is not set +# CONFIG_ARCH_HAVE_USART1 is not set +# CONFIG_ARCH_HAVE_USART2 is not set +CONFIG_ARCH_HAVE_USART3=y +# CONFIG_ARCH_HAVE_USART4 is not set +# CONFIG_ARCH_HAVE_USART5 is not set +# CONFIG_ARCH_HAVE_USART6 is not set +# CONFIG_ARCH_HAVE_USART7 is not set +# CONFIG_ARCH_HAVE_USART8 is not set + +# +# USART Configuration +# +CONFIG_USART3_ISUART=y +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +CONFIG_USART3_SERIAL_CONSOLE=y +# CONFIG_USART4_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART3 Configuration +# +CONFIG_USART3_RXBUFSIZE=256 +CONFIG_USART3_TXBUFSIZE=256 +CONFIG_USART3_BAUD=115200 +CONFIG_USART3_BITS=8 +CONFIG_USART3_PARITY=0 +CONFIG_USART3_2STOP=0 +# CONFIG_USART3_IFLOWCONTROL is not set +# CONFIG_USART3_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +CONFIG_FS_READABLE=y +CONFIG_FS_WRITABLE=y +# CONFIG_FS_RAMMAP is not set +CONFIG_FS_FAT=y +CONFIG_FAT_LCNAMES=y +CONFIG_FAT_LFN=y +CONFIG_FAT_MAXFNAME=32 +# CONFIG_FS_FATTIME is not set +# CONFIG_FAT_DMAMEMORY is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_SMARTFS is not set +# CONFIG_FS_BINFS is not set +# CONFIG_FS_PROCFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +CONFIG_BUILTIN=y +# CONFIG_PIC is not set +CONFIG_SYMTAB_ORDEREDBYNAME=y + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# +CONFIG_BUILTIN_PROXY_STACKSIZE=1024 + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CPUHOG is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +# CONFIG_EXAMPLES_NRF24L01TERM is not set +CONFIG_EXAMPLES_NSH=y +CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART_TEST is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +# CONFIG_NETUTILS_UIPLIB is not set +# CONFIG_NETUTILS_WEBCLIENT is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_BUILTIN_APPS=y + +# +# Disable Individual commands +# +CONFIG_NSH_DISABLE_ADDROUTE=y +CONFIG_NSH_DISABLE_CAT=y +CONFIG_NSH_DISABLE_CD=y +CONFIG_NSH_DISABLE_CP=y +CONFIG_NSH_DISABLE_CMP=y +CONFIG_NSH_DISABLE_DD=y +CONFIG_NSH_DISABLE_DF=y +CONFIG_NSH_DISABLE_DELROUTE=y +CONFIG_NSH_DISABLE_ECHO=y +CONFIG_NSH_DISABLE_EXEC=y +CONFIG_NSH_DISABLE_EXIT=y +# CONFIG_NSH_DISABLE_FREE is not set +CONFIG_NSH_DISABLE_GET=y +# CONFIG_NSH_DISABLE_HELP is not set +CONFIG_NSH_DISABLE_HEXDUMP=y +CONFIG_NSH_DISABLE_IFCONFIG=y +CONFIG_NSH_DISABLE_KILL=y +CONFIG_NSH_DISABLE_LOSETUP=y +CONFIG_NSH_DISABLE_LS=y +# CONFIG_NSH_DISABLE_MB is not set +CONFIG_NSH_DISABLE_MKDIR=y +CONFIG_NSH_DISABLE_MKFATFS=y +CONFIG_NSH_DISABLE_MKFIFO=y +CONFIG_NSH_DISABLE_MKRD=y +# CONFIG_NSH_DISABLE_MH is not set +CONFIG_NSH_DISABLE_MOUNT=y +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PS=y +CONFIG_NSH_DISABLE_PUT=y +CONFIG_NSH_DISABLE_PWD=y +CONFIG_NSH_DISABLE_RM=y +CONFIG_NSH_DISABLE_RMDIR=y +CONFIG_NSH_DISABLE_SET=y +CONFIG_NSH_DISABLE_SH=y +CONFIG_NSH_DISABLE_SLEEP=y +CONFIG_NSH_DISABLE_TEST=y +CONFIG_NSH_DISABLE_UMOUNT=y +CONFIG_NSH_DISABLE_UNSET=y +CONFIG_NSH_DISABLE_USLEEP=y +CONFIG_NSH_DISABLE_WGET=y +CONFIG_NSH_DISABLE_XD=y + +# +# Configure Command Options +# +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_FILEIOSIZE=512 +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +# CONFIG_NSH_CMDPARMS is not set +CONFIG_NSH_MAXARGUMENTS=6 +# CONFIG_NSH_ARGCAT is not set +CONFIG_NSH_NESTDEPTH=1 +CONFIG_NSH_DISABLESCRIPT=y +CONFIG_NSH_DISABLEBG=y +CONFIG_NSH_CONSOLE=y + +# +# USB Trace Support +# +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# EMACS-like Command Line Editor +# +# CONFIG_SYSTEM_CLE is not set + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# I2C tool +# + +# +# INI File Parser +# +# CONFIG_SYSTEM_INIFILE is not set + +# +# NxPlayer media player library / command Line +# +# CONFIG_SYSTEM_NXPLAYER is not set + +# +# RAM test +# +CONFIG_SYSTEM_RAMTEST=y + +# +# readline() +# +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y + +# +# P-Code Support +# + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# VI Work-Alike Editor +# +# CONFIG_SYSTEM_VI is not set + +# +# Stack Monitor +# + +# +# USB CDC/ACM Device Commands +# + +# +# USB Composite Device Commands +# + +# +# USB Mass Storage Device Commands +# + +# +# USB Monitor +# + +# +# Zmodem Commands +# +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/sama5d4-ek/ramtest/setenv.sh b/configs/sama5d4-ek/ramtest/setenv.sh new file mode 100755 index 0000000000..61363d7749 --- /dev/null +++ b/configs/sama5d4-ek/ramtest/setenv.sh @@ -0,0 +1,76 @@ +#!/bin/bash +# configs/sama5d4-ek/ramtest/setenv.sh +# +# Copyright (C) 2014 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# + +if [ "$_" = "$0" ] ; then + echo "You must source this script, not run it!" 1>&2 + exit 1 +fi + +WD=`pwd` +if [ ! -x "setenv.sh" ]; then + echo "This script must be executed from the top-level NuttX build directory" + exit 1 +fi + +if [ -z "${PATH_ORIG}" ]; then + export PATH_ORIG="${PATH}" +fi + +# This is the Cygwin path to the location where I installed the Atmel GCC +# toolchain under Windows. You will also have to edit this if you install +# this toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin" + +# This is the Cygwin path to the location where I installed the CodeSourcery +# toolchain under windows. You will also have to edit this if you install +# the CodeSourcery toolchain in any other location +#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" + +# These are the Cygwin paths to the locations where I installed the Atollic +# toolchain under windows. You will also have to edit this if you install +# the Atollic toolchain in any other location. /usr/bin is added before +# the Atollic bin path because there is are binaries named gcc.exe and g++.exe +# at those locations as well. +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin" +#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin" + +# This is the Cygwin path to the location where I build the buildroot +# toolchain. +#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm/staging_dir/bin" + +# Add the path to the toolchain to the PATH varialble +export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}" + +echo "PATH : ${PATH}"