sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Config for ez80f910200zco board

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@1428 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2008-12-07 15:44:56 +00:00
parent e4d3967c14
commit e0aced1458
12 changed files with 2187 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

57
configs/ez80f910200zco/README.txt Normal file
View File

@ -0,0 +1,57 @@
README.txt
^^^^^^^^^^
ZDS-II Compiler Versions
^^^^^^^^^^^^^^^^^^^^^^^^
4.11.0
This is the only version that this code has been built against.
Although it compiles without error, the 4.11.0 compiler generates
bad code on one of the files, mm/mm_initialize.c. Below is a simple work-
around.
--- mm/mm_initialize.c.SAVE 2008-02-13 08:06:46.833857700 -0600
+++ mm/mm_initialize.c 2008-02-13 08:07:26.367608900 -0600
@@ -94,8 +94,11 @@
{
int i;
+#if 0 /* DO NOT CHECK IN */
CHECK_ALLOCNODE_SIZE;
CHECK_FREENODE_SIZE;
+#endif
/* Set up global variables */
Other Versions
If you use any version of ZDS-II other than 4.11.0 or if you install ZDS-II
at any location other than the default location, you will have to modify
two files: (1) configs/ez80f910200zco/*/setenv.sh and (2)
configs/ez80f910200zco/*/Make.defs.
Configuration Subdirectories
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
src/ and include/
These directories contain common logic for all ez80f910200zco
configurations.
Variations on the basic ez80f910200zco configuration are maintained
in subdirectories. To configure any specific configuration, do the
following steps:
cd <nuttx-top-directory>/tools
./configure.sh ez80f910200zco/<sub-directory>
cd <nuttx-top-directgory>
make
Where <sub-directory> is the specific board configuration that you
wish to build. The following board-specific configurations are
available:
ostest
This builds the examples/ostest application for execution from FLASH.
See examples/README.txt for information about ostest.
Check out any README.txt files in these <sub-directory>s.

76
configs/ez80f910200zco/include/board.h Normal file
View File

@ -0,0 +1,76 @@
/****************************************************************************
* arch/ez80f910200zco/include/board.h
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/****************************************************************************
* Included Files
****************************************************************************/
/****************************************************************************
* Definitions
****************************************************************************/
/* LED pattern definitions */
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_IDLE 4
#define LED_INIRQ 5
#define LED_ASSERTION 6
#define LED_SIGNAL 6
#define LED_PANIC 7
/****************************************************************************
* Public Functions
****************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ARCH_BOARD_BOARD_H */

176
configs/ez80f910200zco/ostest/Make.defs Normal file
View File

@ -0,0 +1,176 @@
############################################################################
# configs/ez80f910200zco/ostest/Make.defs
#
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# These are the directories where the ZDS-II toolchain is installed
ZDSINSTALLDIR := C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.11.0
ZDSBINDIR := $(ZDSINSTALLDIR)/bin
ZDSSTDINCDIR := $(ZDSINSTALLDIR)/include/std
ZDSZILOGINCDIR := $(ZDSINSTALLDIR)/include/zilog
ZDSSTDLIBDIR := $(ZDSINSTALLDIR)/lib/std
ZDSZILOGLIBDIR := $(ZDSINSTALLDIR)/lib/zilog
# These are the same directories but with the directory separator
# character swapped as needed by the ZDS-II compiler
WTOPDIR := ${shell cygpath -w $(TOPDIR)}
WZDSSTDINCDIR := ${shell cygpath -w $(ZDSSTDINCDIR)}
WZDSZILOGINCDIR := ${shell cygpath -w $(ZDSZILOGINCDIR)}
WZDSSTDLIBDIR := ${shell cygpath -w $(ZDSSTDLIBDIR)}
WZDSZILOGLIBDIR := ${shell cygpath -w $(ZDSZILOGLIBDIR)}
# Escaped versions
ETOPDIR := ${shell echo "$(WTOPDIR)" | sed -e "s/ /%20/g"}
EZDSSTDINCDIR := ${shell echo "$(WZDSSTDINCDIR)" | sed -e "s/ /%20/g"}
EZDSZILOGINCDIR := ${shell echo "$(WZDSZILOGINCDIR)" | sed -e "s/ /%20/g"}
# Assembler definitions
ifeq ($(CONFIG_ARCH_CHIP_EZ80F91),y)
ARCHCPU = eZ80F91
ARCHCPUDEF = _EZ80F91
ARCHFAMILY = _EZ80ACCLAIM!
endif
ifeq ("${CONFIG_DEBUG}","y")
ARCHASMOPTIMIZATION = -debug -NOsdiopt
else
ARCHASMOPTIMIZATION = -nodebug -NOsdiopt
endif
ARCHASMCPUFLAGS = -cpu:$(ARCHCPU) -NOigcase
ARCHASMLIST = -list -NOlistmac -name -pagelen:56 -pagewidth:80 -quiet
ARCHASMWARNINGS = -warn
ARCHASMDEFINES = -define:$(ARCHCPUDEF)=1 -define:$(ARCHFAMILYDEF)=1 -define:__ASSEMBLY__
ARCHASMINCLUDES = -include:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
EARCHASMINCLUDES = -include:'$(ETOPDIR)\include;$(EZDSSTDINCDIR);$(EZDSZILOGINCDIR)'
AFLAGS = $(ARCHASMCPUFLAGS) $(ARCHASMINCLUDES) $(ARCHASMLIST) \
$(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)
# Compiler definitions
ifeq ("${CONFIG_DEBUG}","y")
ARCHOPTIMIZATION = -debug -reduceopt
else
ARCHOPTIMIZATION = -nodebug -optsize
endif
ARCHCPUFLAGS = -chartype:S -promote -cpu:$(ARCHCPU) -NOgenprintf -NOmodsect \
-asmsw:" $(ARCHASMCPUFLAGS) $(EARCHASMINCLUDES) $(ARCHASMWARNINGS) $(ARCHASMOPTIMIZATION)"
ARCHLIST = -keeplst -NOlist -NOlistinc -keepasm
ARCHPICFLAGS =
ARCHWARNINGS = -warn
ARCHDEFINES = -define:$(ARCHCPUDEF) -define:$(ARCHFAMILYDEF)
ARCHSTDINCLUDES = -stdinc:'$(WTOPDIR)\include;$(WZDSSTDINCDIR);$(WZDSZILOGINCDIR)'
ARCHUSRINCLUDES = -usrinc:'.'
ARCHINCLUDES = $(ARCHSTDINCLUDES) $(ARCHUSRINCLUDES)
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHLIST) \
$(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES)
CPPDEFINES = -D$(ARCHFAMILYDEF) -D$(ARCHCPUDEF) -D__ASSEMBLY__
CPPINCLUDES = -I$(TOPDIR)/include
CPPFLAGS = $(CPPDEFINES) $(CPPINCLUDES)
# Librarian definitions
ARFLAGS = -quiet -warn
# Linker definitions
LINKCMDTEMPLATE = $(TOPDIR)/configs/ez80f910200zco/ostest/ostest.linkcmd
# Tool names/pathes
CROSSDEV =
CC = $(ZDSBINDIR)/eZ80cc.exe
CPP = gcc -E
LD = $(ZDSBINDIR)/eZ80link.exe
AS = $(ZDSBINDIR)/eZ80asm.exe
AR = $(ZDSBINDIR)/eZ80lib.exe
# File extensions
ASMEXT = .asm
OBJEXT = .obj
LIBEXT = .lib
EXEEXT = .lod
HEXEXT = .hex
# These are the macros that will be used in the NuttX make system
# to compile and assembly source files and to insert the resulting
# object files into an archive
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@#echo "CC: $1"
@$(CC) $(CFLAGS) $1
endef
define ASSEMBLE
@#echo "AS: $1"
@$(AS) -c $(AFLAGS) $1
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $(ARFLAGS) $1=-+$2 || { echo "$(AR) $1=-+$2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.obj *.src *.lib *.hex *.lod *.lst
endef
# This is the tool to use for dependencies (i.e., none)
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
# ZDS-II cannot follow Cygwin soft links, so we will have to use directory copies
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
# Linux/Cygwin host tool definitions
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

12
configs/ez80f910200zco/ostest/README.txt Normal file
View File

@ -0,0 +1,12 @@
README.txt
^^^^^^^^^^
ostest.zdsproj is a simple ZDS-II project that will allow you
to use the ZDS-II debugger. Before using, copy the following
files from the toplevel directory:
nuttx.hex, nuttx.map, nuttx.lod
to this directory as:
ostest.hex, ostest.map, ostest.lod

704
configs/ez80f910200zco/ostest/defconfig Normal file
View File

@ -0,0 +1,704 @@
############################################################################
# configs/ez80f910200zco/ostest/defconfig
#
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#
# Architecture selection
#
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
# processor architecture.
# CONFIG_ARCH_name - for use in C code. This identifies the particular
# processor architecture or, more accurately, the specific directory under
# nuttx/arch to use (CONFIG_ARCH_Z80 specifies nuttx/arch/z80).
# CONFIG_ARCH_CHIP - Identifies the specific chip or SoC that implements the
# architecture.
# CONFIG_ARCH_CHIP_chip - for use in C code. This identifies the
# particular chip or SoC that the architecture is implemented
# in (CONFIG_ARCH_CHIP_EZ80)
# CONFIG_ARCH_CHIP_EZ80F91 - Identifies ez80 chip variant
# CONFIG_ARCH_CHIP_EZ80F92
# CONFIG_ARCH_CHIP_EZ80F93
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
# the board that supports the particular chip or SoC.
# CONFIG_ARCH_BOARD_name - for use in C code
# CONFIG_ARCH_NOINTC - define if the architecture does not
# support an interrupt controller or otherwise cannot support
# APIs like up_enable_irq() and up_disable_irq().
# CONFIG_ARCH_IRQPRIO
# Define if the architecture suports prioritizaton of interrupts
# and the up_prioritize_irq() API.
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
# CONFIG_ENDIAN_BIG - Define for big-endian operation
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to z8 board architecture.
#
CONFIG_ARCH=z80
CONFIG_ARCH_Z80=y
CONFIG_ARCH_CHIP=ez80
CONFIG_ARCH_CHIP_EZ80=y
CONFIG_ARCH_CHIP_EZ80F91=y
CONFIG_ARCH_CHIP_EZ80F92=n
CONFIG_ARCH_CHIP_EZ80F93=n
CONFIG_ARCH_BOARD=ez80f910200zco
CONFIG_ARCH_BOARD_EZ80F910200ZCO=y
CONFIG_ARCH_NOINTC=y
CONFIG_ARCH_IRQPRIO=n
CONFIG_BOARD_LOOPSPERMSEC=1250
CONFIG_ENDIAN_BIG=y
CONFIG_DRAM_SIZE=65536
CONFIG_ARCH_LEDS=n
#
# eZ8 specific device driver settings
#
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
# console and ttyS0 (default is the UART0).
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
# This specific the size of the receive buffer
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
# being sent. This specific the size of the transmit buffer
# CONFIG_UARTn_BAUD - The configure BAUD of the UART.
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
# CONFIG_UARTn_2STOP - 0=1 stop bit; 1=Two stop bits
#
CONFIG_UART0_SERIAL_CONSOLE=y
CONFIG_UART1_SERIAL_CONSOLE=n
CONFIG_UART0_TXBUFSIZE=0
CONFIG_UART1_TXBUFSIZE=0
CONFIG_UART0_RXBUFSIZE=0
CONFIG_UART1_RXBUFSIZE=0
CONFIG_UART0_BAUD=57600
CONFIG_UART1_BAUD=57600
CONFIG_UART0_PARITY=0
CONFIG_UART1_PARITY=0
CONFIG_UART0_2STOP=0
CONFIG_UART1_2STOP=0
#
# General build options
#
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
# used with many different loaders using the GNU objcopy program
# Should not be selected if you are not using the GNU toolchain.
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
# used with many different loaders using the GNU objcopy program
# Should not be selected if you are not using the GNU toolchain.
# CONFIG_RAW_BINARY - make a raw binary format file used with many
# different loaders using the GNU objcopy program. This option
# should not be selected if you are not using the GNU toolchain.
# CONFIG_HAVE_LIBM - toolchain supports libm.a
#
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=n
CONFIG_MOTOROLA_SREC=n
CONFIG_RAW_BINARY=n
CONFIG_HAVE_LIBM=n
#
# General OS setup
#
# CONFIG_EXAMPLE - identifies the subdirectory in examples
# that will be used in the build
# CONFIG_DEBUG - enables built-in debug options
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
# CONFIG_MM_REGIONS - If the architecture includes multiple
# regions of memory to allocate from, this specifies the
# number of memory regions that the memory manager must
# handle and enables the API mm_addregion(start, end);
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
# time console output
# CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
# time console input
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
# or TICKS_PER_MSEC=10. This setting may be defined to
# inform NuttX that the processor hardware is providing
# system timer interrupts at some interrupt interval other
# than 10 msec.
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
# this number of milliseconds; Round robin scheduling can
# be disabled by setting this value to zero.
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
# scheduler to monitor system performance
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
# task name to save in the TCB. Useful if scheduler
# instrumentation is selected. Set to zero to disable.
# CONFIG_JULIAN_TIME - Enables Julian time conversions
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
# Used to initialize the internal time logic.
# CONFIG_HAVE_LOWUARTINIT - Provides low-level UART initialization
# logic as up_lowuartinit (only needed if there is no
# serial driver).
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
# provides /dev/console. Enables stdout, stderr, stdin.
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
# driver (minimul support)
#
CONFIG_EXAMPLE=ostest
CONFIG_DEBUG=y
CONFIG_DEBUG_VERBOSE=n
CONFIG_MM_REGIONS=1
CONFIG_ARCH_LOWPUTC=y
CONFIG_RR_INTERVAL=0
CONFIG_SCHED_INSTRUMENTATION=n
CONFIG_TASK_NAME_SIZE=0
CONFIG_START_YEAR=2008
CONFIG_START_MONTH=12
CONFIG_START_DAY=7
CONFIG_JULIAN_TIME=n
CONFIG_HAVE_LOWUARTINIT=y
CONFIG_DEV_CONSOLE=n
CONFIG_DEV_LOWCONSOLE=n
#
# The following can be used to disable categories of
# APIs supported by the OS. If the compiler supports
# weak functions, then it should not be necessary to
# disable functions unless you want to restrict usage
# of those APIs.
#
# There are certain dependency relationships in these
# features.
#
# o mq_notify logic depends on signals to awaken tasks
# waiting for queues to become full or empty.
# o pthread_condtimedwait() depends on signals to wake
# up waiting tasks.
#
CONFIG_DISABLE_CLOCK=y
CONFIG_DISABLE_POSIX_TIMERS=y
CONFIG_DISABLE_PTHREAD=y
CONFIG_DISABLE_SIGNALS=y
CONFIG_DISABLE_MQUEUE=y
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_ENVIRON=y
CONFIG_DISABLE_POLL=y
#
# Misc libc settings
#
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
# little smaller if we do not support fieldwidthes
#
CONFIG_NOPRINTF_FIELDWIDTH=y
#
# Allow for architecture optimized implementations
#
# The architecture can provide optimized versions of the
# following to improve sysem performance
#
CONFIG_ARCH_MEMCPY=n
CONFIG_ARCH_MEMCMP=n
CONFIG_ARCH_MEMMOVE=n
CONFIG_ARCH_MEMSET=n
CONFIG_ARCH_STRCMP=n
CONFIG_ARCH_STRCPY=n
CONFIG_ARCH_STRNCPY=n
CONFIG_ARCH_STRLEN=n
CONFIG_ARCH_BZERO=n
CONFIG_ARCH_KMALLOC=n
CONFIG_ARCH_KZMALLOC=n
CONFIG_ARCH_KFREE=n
#
# Sizes of configurable things (0 disables)
#
# CONFIG_MAX_TASKS - The maximum number of simultaneously
# active tasks. This value must be a power of two.
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
# of parameters that a task may receive (i.e., maxmum value
# of 'argc')
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
# specific data that can be retained
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
# descriptors (one for each open)
# CONFIG_NFILE_STREAMS - The maximum number of streams that
# can be fopen'ed
# CONFIG_NAME_MAX - The maximum size of a file name.
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_NUNGET_CHARS - Number of characters that can be
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
# structures. The system manages a pool of preallocated
# message structures to minimize dynamic allocations
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
# a fixed payload size given by this settin (does not include
# other message structure overhead.
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
# can be passed to a watchdog handler
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
# structures. The system manages a pool of preallocated
# watchdog structures to minimize dynamic allocations
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
# timer structures. The system manages a pool of preallocated
# timer structures to minimize dynamic allocations. Set to
# zero for all dynamic allocations.
#
CONFIG_MAX_TASKS=8
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=0
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_STDIO_BUFFER_SIZE=0
CONFIG_NUNGET_CHARS=0
CONFIG_PREALLOC_MQ_MSGS=0
CONFIG_MQ_MAXMSGSIZE=0
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=0
#
# Framebuffer driver options
CONFIG_FB_CMAP=n
CONFIG_FB_HWCURSOR=n
CONFIG_FB_HWCURSORIMAGE=n
#CONFIG_FB_HWCURSORSIZE
#CONFIG_FB_TRANSPARENCY
#
# Filesystem configuration
#
# CONFIG_FS_FAT - Enable FAT filesystem support
# CONFIG_FAT_SECTORSIZE - Max supported sector size
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
CONFIG_FS_FAT=n
CONFIG_FS_ROMFS=n
#
# SPI-based MMC/SD driver
#
# CONFIG_MMCSD_NSLOTS
# Number of MMC/SD slots supported by the driver
# CONFIG_MMCSD_READONLY
# Provide read-only access (default is read/write)
CONFIG_MMCSD_NSLOTS=1
CONFIG_MMCSD_READONLY=n
#
# TCP/IP and UDP support via uIP
# CONFIG_NET - Enable or disable all network features
# CONFIG_NET_IPv6 - Build in support for IPv6
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
# CONFIG_NET_BUFSIZE - uIP buffer size
# CONFIG_NET_TCP - TCP support on or off
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
# accept() is called. The size of the backlog is selected when listen() is called.
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
# CONFIG_NET_UDP - UDP support on or off
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
# CONFIG_NET_ICMP - ICMP ping response support on or off
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
# CONFIG_NET_STATISTICS - uIP statistics on or off
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
# CONFIG_NET_BROADCAST - Broadcast support
# CONFIG_NET_LLH_LEN - The link level header length
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
CONFIG_NET=n
CONFIG_NET_IPv6=n
CONFIG_NSOCKET_DESCRIPTORS=0
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_BUFSIZE=420
CONFIG_NET_TCP=n
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_UDP=n
CONFIG_NET_UDP_CHECKSUMS=y
#CONFIG_NET_UDP_CONNS=10
CONFIG_NET_ICMP=n
CONFIG_NET_ICMP_PING=n
#CONFIG_NET_PINGADDRCONF=0
CONFIG_NET_STATISTICS=y
#CONFIG_NET_RECEIVE_WINDOW=
#CONFIG_NET_ARPTAB_SIZE=8
CONFIG_NET_BROADCAST=n
#CONFIG_NET_LLH_LEN=14
#CONFIG_NET_FWCACHE_SIZE=2
#
# UIP Network Utilities
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# USB Device Configuration
#
# CONFIG_USBDEV
# Enables USB device support
# CONFIG_USBDEV_ISOCHRONOUS
# Build in extra support for isochronous endpoints
# CONFIG_USBDEV_DUALSPEED
# Hardware handles high and full speed operation (USB 2.0)
# CONFIG_USBDEV_SELFPOWERED
# Will cause USB features to indicate that the device is
# self-powered
# CONFIG_USBDEV_MAXPOWER
# Maximum power consumption in mA
# CONFIG_USBDEV_TRACE
# Enables USB tracing for debug
# CONFIG_USBDEV_TRACE_NRECORDS
# Number of trace entries to remember
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
CONFIG_USBDEV_DUALSPEED=n
CONFIG_USBDEV_SELFPOWERED=y
CONFIG_USBDEV_REMOTEWAKEUP=n
CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# USB Serial Device Configuration
#
# CONFIG_USBSER
# Enable compilation of the USB serial driver
# CONFIG_USBSER_EPINTIN
# The logical 7-bit address of a hardware endpoint that supports
# interrupt IN operation
# CONFIG_USBSER_EPBULKOUT
# The logical 7-bit address of a hardware endpoint that supports
# bulk OUT operation
# CONFIG_USBSER_EPBULKIN
# The logical 7-bit address of a hardware endpoint that supports
# bulk IN operation
# CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
# The number of write/read requests that can be in flight
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
# The vendor ID code/string
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
# The product ID code/string
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
# Size of the serial receive/transmit buffers
CONFIG_USBSER=n
CONFIG_USBSER_EPINTIN=1
CONFIG_USBSER_EPBULKOUT=2
CONFIG_USBSER_EPBULKIN=5
CONFIG_USBSER_NWRREQS=4
CONFIG_USBSER_NRDREQS=4
CONFIG_USBSER_VENDORID=0x067b
CONFIG_USBSER_PRODUCTID=0x2303
CONFIG_USBSER_VENDORSTR="Nuttx"
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
CONFIG_USBSER_RXBUFSIZE=512
CONFIG_USBSER_TXBUFSIZE=512
#
# USB Storage Device Configuration
#
# CONFIG_USBSTRG
# Enable compilation of the USB storage driver
# CONFIG_USBSTRG_EP0MAXPACKET
# Max packet size for endpoint 0
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
# The logical 7-bit address of a hardware endpoints that support
# bulk OUT and IN operations
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
# The number of write/read requests that can be in flight
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
# The size of the buffer in each write/read request. This
# value needs to be at least as large as the endpoint
# maxpacket and ideally as large as a block device sector.
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
# The vendor ID code/string
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
# The product ID code/string
# CONFIG_USBSTRG_REMOVABLE
# Select if the media is removable
CONFIG_USBSTRG=n
CONFIG_USBSTRG_EP0MAXPACKET=64
CONFIG_USBSTRG_EPBULKOUT=2
CONFIG_USBSTRG_EPBULKIN=5
CONFIG_USBSTRG_NRDREQS=2
CONFIG_USBSTRG_NWRREQS=2
CONFIG_USBSTRG_BULKINREQLEN=256
CONFIG_USBSTRG_BULKOUTREQLEN=256
CONFIG_USBSTRG_VENDORID=0x584e
CONFIG_USBSTRG_VENDORSTR="NuttX"
CONFIG_USBSTRG_PRODUCTID=0x5342
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
CONFIG_USBSTRG_VERSIONNO=0x0399
CONFIG_USBSTRG_REMOVABLE=y
#
# CONFIG_NX
# Enables overall support for graphics library and NX
# CONFIG_NX_MULTIUSER
# Configures NX in multi-user mode
# CONFIG_NX_NPLANES
# Some YUV color formats requires support for multiple planes,
# one for each color component. Unless you have such special
# hardware, this value should be undefined or set to 1
# CONFIG_NX_DISABLE_1BPP, CONFIG_NX_DISABLE_2BPP,
# CONFIG_NX_DISABLE_4BPP, CONFIG_NX_DISABLE_8BPP,
# CONFIG_NX_DISABLE_16BPP, CONFIG_NX_DISABLE_24BPP, and
# CONFIG_NX_DISABLE_32BPP
# NX supports a variety of pixel depths. You can save some
# memory by disabling support for unused color depths.
# CONFIG_NX_PACKEDMSFIRST
# If a pixel depth of less than 8-bits is used, then NX needs
# to know if the pixels pack from the MS to LS or from LS to MS
# CONFIG_NX_MOUSE
# Build in support for mouse input
# CONFIG_NX_KBD
# Build in support of keypad/keyboard input
# CONFIG_NXTK_BORDERWIDTH
# Specifies with with of the border (in pixels) used with
# framed windows. The default is 4.
# CONFIG_NXTK_BORDERCOLOR1 and CONFIG_NXTK_BORDERCOLOR2
# Specify the colors of the border used with framed windows.
# CONFIG_NXTK_BORDERCOLOR2 is the shadow side color and so
# is normally darker. The default is medium and dark grey,
# respectively
# CONFIG_NXTK_AUTORAISE
# If set, a window will be raised to the top if the mouse position
# is over a visible portion of the window. Default: A mouse
# button must be clicked over a visible portion of the window.
# CONFIG_NXFONTS_CHARBITS
# The number of bits in the character set. Current options are
# only 7 and 8. The default is 7.
# CONFIG_NXFONT_SANS
# At present, there is only one font. But if there were were more,
# then this option would select the sans serif font.
#
# NX Multi-user only options:
#
# CONFIG_NX_BLOCKING
# Open the client message queues in blocking mode. In this case,
# nx_eventhandler() will not return until a message is received and processed.
# CONFIG_NX_MXSERVERMSGS and CONFIG_NX_MXCLIENTMSGS
# Specifies the maximum number of messages that can fit in
# the message queues. No additional resources are allocated, but
# this can be set to prevent flooding of the client or server with
# too many messages (CONFIG_PREALLOC_MQ_MSGS controls how many
# messages are pre-allocated).
#
CONFIG_NX=y
CONFIG_NX_MULTIUSER=n
CONFIG_NX_NPLANES=1
CONFIG_NX_DISABLE_1BPP=y
CONFIG_NX_DISABLE_2BPP=y
CONFIG_NX_DISABLE_4BPP=y
CONFIG_NX_DISABLE_8BPP=n
CONFIG_NX_DISABLE_16BPP=y
CONFIG_NX_DISABLE_24BPP=y
CONFIG_NX_DISABLE_32BPP=y
CONFIG_NX_PACKEDMSFIRST=n
CONFIG_NX_MOUSE=y
CONFIG_NX_KBD=y
#CONFIG_NXTK_BORDERWIDTH=4
#CONFIG_NXTK_BORDERCOLOR1
#CONFIG_NXTK_BORDERCOLOR2
CONFIG_NXTK_AUTORAISE=n
CONFIG_NXFONT_SANS=y
CONFIG_NXFONTS_CHARBITS=7
CONFIG_NX_BLOCKING=y
CONFIG_NX_MXSERVERMSGS=32
CONFIG_NX_MXCLIENTMSGS=16
#
# Settings for examples/uip
CONFIG_EXAMPLE_UIP_IPADDR=(192<<24|168<<16|0<<8|128)
CONFIG_EXAMPLE_UIP_DRIPADDR=(192<<24|168<<16|0<<8|1)
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_UIP_SMTP=n
CONFIG_EXAMPLE_UIP_TELNETD=n
CONFIG_EXAMPLE_UIP_WEBSERVER=y
CONFIG_EXAMPLE_UIP_DHCPC=n
CONFIG_EXAMPLE_UIP_WEBCLIENT=n
#
# Settings for examples/nettest
CONFIG_EXAMPLE_NETTEST_SERVER=n
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
CONFIG_EXAMPLE_NETTEST_NOMAC=n
CONFIG_EXAMPLE_NETTEST_IPADDR=(192<<24|168<<16|0<<8|128)
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(192<<24|168<<16|0<<8|1)
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(192<<24|168<<16|0<<8|106)
#
# Settings for examples/ostest
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=256
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
#
# Settings for examples/nsh
#
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
#
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
#
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
CONFIG_EXAMPLES_NSH_STRERROR=n
CONFIG_EXAMPLES_NSH_LINELEN=64
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
CONFIG_EXAMPLES_NSH_DISABLEBG=n
CONFIG_EXAMPLES_NSH_ROMFSETC=n
CONFIG_EXAMPLES_NSH_CONSOLE=y
CONFIG_EXAMPLES_NSH_TELNET=n
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
CONFIG_EXAMPLES_NSH_CMD_SIZE=40
CONFIG_EXAMPLES_NSH_STACKSIZE=512
CONFIG_EXAMPLES_NSH_DHCPC=n
CONFIG_EXAMPLES_NSH_NOMAC=n
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
CONFIG_EXAMPLES_NSH_FATDEVNO=1
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
#
# Architecture-specific NSH options
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=1
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
#
# Settings for examples/nx
#
# CONFIG_EXAMPLES_NX_VPLANE -- The plane to select from the frame-
# buffer driver for use in the test. Default: 0
# CONFIG_EXAMPLES_NX_BGCOLOR -- The color of the background. Default depends on
# CONFIG_EXAMPLES_NX_BPP.
# CONFIG_EXAMPLES_NX_COLOR1 -- The color of window 1. Default depends on
# CONFIG_EXAMPLES_NX_BPP.
# CONFIG_EXAMPLES_NX_COLOR2 -- The color of window 2. Default depends on
# CONFIG_EXAMPLES_NX_BPP.
# CONFIG_EXAMPLES_NX_TBCOLOR -- The color of the toolbar. Default depends on
# CONFIG_EXAMPLES_NX_BPP.
# CONFIG_EXAMPLES_NX_FONTCOLOR -- The color of the toolbar. Default depends on
# CONFIG_EXAMPLES_NX_BPP.
# CONFIG_EXAMPLES_NX_BPP -- Pixels per pixel to use. Valid options
# include 2, 4, 8, 16, 24, and 32. Default is 32.
# CONFIG_EXAMPLES_NX_RAWWINDOWS -- Use raw windows; Default is to
# use pretty, framed NXTK windows with toolbars.
# CONFIG_EXAMPLES_NX_STACKSIZE -- The stacksize to use when creating
# the NX server. Default 2048
# CONFIG_EXAMPLES_NX_CLIENTPRIO -- The client priority. Default: 80
# CONFIG_EXAMPLES_NX_SERVERPRIO -- The server priority. Default: 120
# CONFIG_EXAMPLES_NX_NOTIFYSIGNO -- The signal number to use with
# nx_eventnotify(). Default: 4
CONFIG_EXAMPLES_NX_VPLANE=0
#CONFIG_EXAMPLES_NX_BGCOLOR
#CONFIG_EXAMPLES_NX_COLOR1
#CONFIG_EXAMPLES_NX_COLOR2
#CONFIG_EXAMPLES_NX_TBCOLOR
#CONFIG_EXAMPLES_NX_FONTCOLOR
CONFIG_EXAMPLES_NX_BPP=CONFIG_SIM_FBBPP
CONFIG_EXAMPLES_NX_RAWWINDOWS=n
CONFIG_EXAMPLES_NX_STACKSIZE=8192
CONFIG_EXAMPLES_NX_CLIENTPRIO=80
CONFIG_EXAMPLES_NX_SERVERPRIO=120
CONFIG_EXAMPLES_NX_NOTIFYSIGNO=4
#
# Settings for examples/mount
CONFIG_EXAMPLES_MOUNT_DEVNAME="/dev/ram0"
#CONFIG_EXAMPLES_MOUNT_NSECTORS=2048
#CONFIG_EXAMPLES_MOUNT_SECTORSIZE=512
#CONFIG_EXAMPLES_MOUNT_RAMDEVNO=1
#
# Stack and heap information
#
# CONFIG_BOOT_FROM_FLASH - Some configurations support XIP
# operation from FLASH.
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
# all stack operations outside of the nuttx model.
# CONFIG_STACK_POINTER - The initial stack pointer
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
# This is the thread that (1) performs the inital boot of the system up
# to the point where user_start() is spawned, and (2) there after is the
# IDLE thread that executes only when there is no other thread ready to
# run.
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
# for the main user thread that begins at the user_start() entry point.
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
# CONFIG_HEAP_BASE - The beginning of the heap
# CONFIG_HEAP_SIZE - The size of the heap
#
CONFIG_BOOT_FROM_FLASH=n
CONFIG_CUSTOM_STACK=n
CONFIG_STACK_POINTER=
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=1024
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=1024
CONFIG_HEAP_BASE=
CONFIG_HEAP_SIZE=

94
configs/ez80f910200zco/ostest/ostest.linkcmd Executable file
View File

@ -0,0 +1,94 @@
/****************************************************************************/
/* configs/ez80f910200zco/ostest/ostest.linkcmd */
/* */
/* Copyright (C) 2008 Gregory Nutt. All rights reserved. */
/* Author: Gregory Nutt <spudmonkey@racsa.co.cr> */
/* */
/* Redistribution and use in source and binary forms, with or without */
/* modification, are permitted provided that the following conditions */
/* are met: */
/* */
/* 1. Redistributions of source code must retain the above copyright */
/* notice, this list of conditions and the following disclaimer. */
/* 2. Redistributions in binary form must reproduce the above copyright */
/* notice, this list of conditions and the following disclaimer in */
/* the documentation and/or other materials provided with the */
/* distribution. */
/* 3. Neither the name NuttX nor the names of its contributors may be */
/* used to endorse or promote products derived from this software */
/* without specific prior written permission. */
/* */
/* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS */
/* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT */
/* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS */
/* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE */
/* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, */
/* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS */
/* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED */
/* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT */
/* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN */
/* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE */
/* POSSIBILITY OF SUCH DAMAGE. */
/* */
/****************************************************************************/
-FORMAT=OMF695,INTEL32
-map -maxhexlen=64 -quiet -NOwarnoverlap -xref -unresolved=fatal
-sort NAME=ascending -warn -NOdebug -NOigcase
RANGE ROM $000000 : $03FFFF
RANGE RAM $B7E000 : $B7FFFF
RANGE EXTIO $000000 : $00FFFF
RANGE INTIO $000000 : $0000FF
CHANGE STRSECT = ROM
ORDER .RESET,.IVECTS,.STARTUP,CODE,DATA
COPY DATA ROM
DEFINE __low_romdata = copy base of DATA
DEFINE __low_data = base of DATA
DEFINE __len_data = length of DATA
DEFINE __low_bss = base of BSS
DEFINE __len_bss = length of BSS
DEFINE __stack = highaddr of RAM + 1
DEFINE __heaptop = highaddr of RAM
DEFINE __heapbot = top of RAM + 1
DEFINE __low_romcode = copy base of CODE
DEFINE __low_code = base of CODE
DEFINE __len_code = length of CODE
DEFINE __copy_code_to_ram = 0
DEFINE __crtl = 1
DEFINE __CS0_LBR_INIT_PARAM = $10
DEFINE __CS0_UBR_INIT_PARAM = $1f
DEFINE __CS0_CTL_INIT_PARAM = $a8
DEFINE __CS0_BMC_INIT_PARAM = $02
DEFINE __CS1_LBR_INIT_PARAM = $b8
DEFINE __CS1_UBR_INIT_PARAM = $b9
DEFINE __CS1_CTL_INIT_PARAM = $28
DEFINE __CS1_BMC_INIT_PARAM = $02
DEFINE __CS2_LBR_INIT_PARAM = $80
DEFINE __CS2_UBR_INIT_PARAM = $bf
DEFINE __CS2_CTL_INIT_PARAM = $28
DEFINE __CS2_BMC_INIT_PARAM = $02
DEFINE __CS3_LBR_INIT_PARAM = $60
DEFINE __CS3_UBR_INIT_PARAM = $7f
DEFINE __CS3_CTL_INIT_PARAM = $a8
DEFINE __CS3_BMC_INIT_PARAM = $02
DEFINE __RAM_CTL_INIT_PARAM = $C0
DEFINE __RAM_ADDR_U_INIT_PARAM = $B7
DEFINE __FLASH_CTL_INIT_PARAM = $68
DEFINE __FLASH_ADDR_U_INIT_PARAM = $00
define _SYS_CLK_FREQ = 50000000
define _OSC_FREQ = 5000000
define _SYS_CLK_SRC = 1
define _OSC_FREQ_MULT = 10
define __PLL_CTL0_INIT_PARAM = $41
define _zsl_g_clock_xdefine = 50000000
/* arch/z80/src/Makefile.zdsii will append target, object and library paths below */

247
configs/ez80f910200zco/ostest/ostest.zdsproj Executable file
View File

@ -0,0 +1,247 @@
<project type="Executable" project-type="Standard" configuration="Debug" created-by="c:4.11:07071801" modified-by="c:4.11:07071801">
<cpu>eZ80F91</cpu>
<!-- file information -->
<files>
<file filter-key="flash">..\..\..\nuttx.hex</file>
</files>
<!-- configuration information -->
<configurations>
<configuration name="Debug" >
<tools>
<tool name="Assembler">
<options>
<option name="define" type="string" change-action="assemble">_EZ80ACCLAIM!=1,_SIMULATE=1</option>
<option name="include" type="string" change-action="assemble"></option>
<option name="list" type="boolean" change-action="none">true</option>
<option name="listmac" type="boolean" change-action="none">false</option>
<option name="name" type="boolean" change-action="none">true</option>
<option name="pagelen" type="integer" change-action="none">56</option>
<option name="pagewidth" type="integer" change-action="none">80</option>
<option name="quiet" type="boolean" change-action="none">true</option>
<option name="sdiopt" type="boolean" change-action="compile">true</option>
</options>
</tool>
<tool name="Compiler">
<options>
<option name="define" type="string" change-action="compile">_DEBUG,_EZ80F91,_EZ80ACCLAIM!,_SIMULATE</option>
<option name="genprintf" type="boolean" change-action="compile">false</option>
<option name="keepasm" type="boolean" change-action="none">false</option>
<option name="keeplst" type="boolean" change-action="none">true</option>
<option name="list" type="boolean" change-action="none">false</option>
<option name="listinc" type="boolean" change-action="none">false</option>
<option name="modsect" type="boolean" change-action="compile">false</option>
<option name="optspeed" type="boolean" change-action="compile">false</option>
<option name="promote" type="boolean" change-action="compile">true</option>
<option name="reduceopt" type="boolean" change-action="compile">false</option>
<option name="stdinc" type="string" change-action="compile"></option>
<option name="usrinc" type="string" change-action="compile"></option>
<option name="watch" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="Debugger">
<options>
<option name="target" type="string" change-action="rebuild">eZ80DevPlatform_F91_Flash</option>
<option name="debugtool" type="string" change-action="none">Simulator</option>
<option name="usepageerase" type="boolean" change-action="none">true</option>
</options>
</tool>
<tool name="FlashProgrammer">
<options>
<option name="erasebeforeburn" type="boolean" change-action="none">false</option>
<option name="eraseinfopage" type="boolean" change-action="none">false</option>
<option name="enableinfopage" type="boolean" change-action="none">false</option>
<option name="includeserial" type="boolean" change-action="none">false</option>
<option name="offset" type="integer" change-action="none">0</option>
<option name="snenable" type="boolean" change-action="none">false</option>
<option name="sn" type="string" change-action="none">0</option>
<option name="snsize" type="integer" change-action="none">0</option>
<option name="snstep" type="integer" change-action="none">0</option>
<option name="snstepformat" type="integer" change-action="none">0</option>
<option name="snaddress" type="string" change-action="none">0</option>
<option name="snformat" type="integer" change-action="none">0</option>
<option name="snbigendian" type="boolean" change-action="none">true</option>
<option name="singleval" type="string" change-action="none">0</option>
<option name="singlevalformat" type="integer" change-action="none">0</option>
<option name="usepageerase" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="General">
<options>
<option name="warn" type="boolean" change-action="none">true</option>
<option name="debug" type="boolean" change-action="assemble">true</option>
<option name="debugcache" type="boolean" change-action="none">true</option>
<option name="igcase" type="boolean" change-action="assemble">false</option>
<option name="outputdir" type="string" change-action="compile">Debug\</option>
</options>
</tool>
<tool name="Librarian">
<options>
<option name="outfile" type="string" change-action="build">.\Debug\ostest.lib</option>
</options>
</tool>
<tool name="Linker">
<options>
<option name="directives" type="string" change-action="build"></option>
<option name="createnew" type="boolean" change-action="build">true</option>
<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>
<option name="linkctlfile" type="string" change-action="build"></option>
<option name="map" type="boolean" change-action="none">true</option>
<option name="maxhexlen" type="integer" change-action="build">64</option>
<option name="objlibmods" type="string" change-action="build"></option>
<option name="of" type="string" change-action="build">..\..\..\nuttx</option>
<option name="quiet" type="boolean" change-action="none">true</option>
<option name="relist" type="boolean" change-action="build">false</option>
<option name="startuptype" type="string" change-action="build">Included</option>
<option name="startuplnkcmds" type="boolean" change-action="build">true</option>
<option name="usecrun" type="boolean" change-action="build">true</option>
<option name="warnoverlap" type="boolean" change-action="none">true</option>
<option name="xref" type="boolean" change-action="none">true</option>
<option name="undefisfatal" type="boolean" change-action="none">true</option>
<option name="warnisfatal" type="boolean" change-action="none">false</option>
<option name="sort" type="string" change-action="none">NAME</option>
<option name="padhex" type="boolean" change-action="build">false</option>
<option name="fplib" type="string" change-action="build">Real</option>
<option name="useadddirectives" type="boolean" change-action="build">false</option>
<option name="linkconfig" type="string" change-action="build">Standard</option>
<option name="flashinfo" type="string" change-action="build">000000-0001FF</option>
<option name="ram" type="string" change-action="build">B7E000-B7FFFF</option>
<option name="rom" type="string" change-action="build">000000-03FFFF</option>
<option name="extio" type="string" change-action="build">000000-00FFFF</option>
<option name="intio" type="string" change-action="build">000000-0000FF</option>
</options>
</tool>
<tool name="Middleware">
<options>
<option name="usezsl" type="boolean" change-action="rebuild">false</option>
<option name="zslports" type="string" change-action="rebuild"></option>
<option name="zsluarts" type="string" change-action="rebuild"></option>
</options>
</tool>
</tools>
</configuration>
<configuration name="Release" >
<tools>
<tool name="Assembler">
<options>
<option name="define" type="string" change-action="assemble">_EZ80ACCLAIM!=1,_SIMULATE=1</option>
<option name="include" type="string" change-action="assemble"></option>
<option name="list" type="boolean" change-action="none">true</option>
<option name="listmac" type="boolean" change-action="none">false</option>
<option name="name" type="boolean" change-action="none">true</option>
<option name="pagelen" type="integer" change-action="none">56</option>
<option name="pagewidth" type="integer" change-action="none">80</option>
<option name="quiet" type="boolean" change-action="none">true</option>
<option name="sdiopt" type="boolean" change-action="compile">true</option>
</options>
</tool>
<tool name="Compiler">
<options>
<option name="define" type="string" change-action="compile">NDEBUG,_EZ80F91,_EZ80ACCLAIM!,_SIMULATE</option>
<option name="genprintf" type="boolean" change-action="compile">true</option>
<option name="keepasm" type="boolean" change-action="none">false</option>
<option name="keeplst" type="boolean" change-action="none">false</option>
<option name="list" type="boolean" change-action="none">false</option>
<option name="listinc" type="boolean" change-action="none">false</option>
<option name="modsect" type="boolean" change-action="compile">false</option>
<option name="optspeed" type="boolean" change-action="compile">false</option>
<option name="promote" type="boolean" change-action="compile">true</option>
<option name="reduceopt" type="boolean" change-action="compile">false</option>
<option name="stdinc" type="string" change-action="compile"></option>
<option name="usrinc" type="string" change-action="compile"></option>
<option name="watch" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="Debugger">
<options>
<option name="target" type="string" change-action="rebuild">eZ80DevPlatform_F91_Flash</option>
<option name="debugtool" type="string" change-action="none">Simulator</option>
<option name="usepageerase" type="boolean" change-action="none">true</option>
</options>
</tool>
<tool name="FlashProgrammer">
<options>
<option name="erasebeforeburn" type="boolean" change-action="none">false</option>
<option name="eraseinfopage" type="boolean" change-action="none">false</option>
<option name="enableinfopage" type="boolean" change-action="none">false</option>
<option name="includeserial" type="boolean" change-action="none">false</option>
<option name="offset" type="integer" change-action="none">0</option>
<option name="snenable" type="boolean" change-action="none">false</option>
<option name="sn" type="string" change-action="none">0</option>
<option name="snsize" type="integer" change-action="none">0</option>
<option name="snstep" type="integer" change-action="none">0</option>
<option name="snstepformat" type="integer" change-action="none">0</option>
<option name="snaddress" type="string" change-action="none">0</option>
<option name="snformat" type="integer" change-action="none">0</option>
<option name="snbigendian" type="boolean" change-action="none">true</option>
<option name="singleval" type="string" change-action="none">0</option>
<option name="singlevalformat" type="integer" change-action="none">0</option>
<option name="usepageerase" type="boolean" change-action="none">false</option>
</options>
</tool>
<tool name="General">
<options>
<option name="warn" type="boolean" change-action="none">true</option>
<option name="debug" type="boolean" change-action="assemble">false</option>
<option name="debugcache" type="boolean" change-action="none">false</option>
<option name="igcase" type="boolean" change-action="assemble">false</option>
<option name="outputdir" type="string" change-action="compile">.\Release\</option>
</options>
</tool>
<tool name="Librarian">
<options>
<option name="outfile" type="string" change-action="build">.\Release\ostest.lib</option>
</options>
</tool>
<tool name="Linker">
<options>
<option name="directives" type="string" change-action="build"></option>
<option name="createnew" type="boolean" change-action="build">true</option>
<option name="exeform" type="string" change-action="build">OMF695,INTEL32</option>
<option name="linkctlfile" type="string" change-action="build"></option>
<option name="map" type="boolean" change-action="none">true</option>
<option name="maxhexlen" type="integer" change-action="build">64</option>
<option name="objlibmods" type="string" change-action="build"></option>
<option name="of" type="string" change-action="build">.\Release\ostest</option>
<option name="quiet" type="boolean" change-action="none">true</option>
<option name="relist" type="boolean" change-action="build">false</option>
<option name="startuptype" type="string" change-action="build">Included</option>
<option name="startuplnkcmds" type="boolean" change-action="build">true</option>
<option name="usecrun" type="boolean" change-action="build">true</option>
<option name="warnoverlap" type="boolean" change-action="none">true</option>
<option name="xref" type="boolean" change-action="none">true</option>
<option name="undefisfatal" type="boolean" change-action="none">true</option>
<option name="warnisfatal" type="boolean" change-action="none">false</option>
<option name="sort" type="string" change-action="none">name</option>
<option name="padhex" type="boolean" change-action="build">false</option>
<option name="fplib" type="string" change-action="build">Real</option>
<option name="useadddirectives" type="boolean" change-action="build">false</option>
<option name="linkconfig" type="string" change-action="build">Standard</option>
<option name="flashinfo" type="string" change-action="build">000000-0001FF</option>
<option name="ram" type="string" change-action="build">B7E000-B7FFFF</option>
<option name="rom" type="string" change-action="build">000000-03FFFF</option>
<option name="extio" type="string" change-action="build">000000-00FFFF</option>
<option name="intio" type="string" change-action="build">000000-0000FF</option>
</options>
</tool>
<tool name="Middleware">
<options>
<option name="usezsl" type="boolean" change-action="rebuild">false</option>
<option name="zslports" type="string" change-action="rebuild"></option>
<option name="zsluarts" type="string" change-action="rebuild"></option>
</options>
</tool>
</tools>
</configuration>
</configurations>
<!-- watch information -->
<watch-elements>
</watch-elements>
<!-- breakpoint information -->
<breakpoints>
</breakpoints>
</project>

52
configs/ez80f910200zco/ostest/setenv.sh Executable file
View File

@ -0,0 +1,52 @@
#!/bin/bash
# configs/ez80f910200zco/ostest/setenv.sh
#
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Check how we were executed
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
#
# The ZDS-II toolchain lies outside of the Cygwin "sandbox" and
# attempts to set the PATH variable do not have the desired effect.
# Instead, alias are provided for all of the ZDS-II command line tools.
# Version 4.10.1 installed in the default location is assumed here.
#
ZDSBINDIR="C:/Program\ Files/ZiLOG/ZDSII_eZ80Acclaim!_4.10.1/bin"
alias ez8asm="${ZDSBINDIR}/ez8asm.exe"
alias ez8cc="${ZDSBINDIR}/ez8cc.exe"
alias ez8lib="${ZDSBINDIR}/ez8lib.exe"
alias ez8link="${ZDSBINDIR}/ez8link.exe"

529
configs/ez80f910200zco/ostest/test-result.txt Normal file
View File

@ -0,0 +1,529 @@
This is the output from the z16f target from January 31, 2008
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
While all tests pass per this output, my impression is that some
of the timed delays in during execution of the test were not
correct and I suspect some system timing issues.
stdio_test: write fd=1
stdio_test: write fd=2
stdio_test: Standard I/O Check: printf
user_start: putenv(Variable1=BadValue3)
user_start: setenv(Variable1, GoodValue1, TRUE)
user_start: setenv(Variable2, BadValue1, FALSE)
user_start: setenv(Variable2, GoodValue2, TRUE)
user_start: setenv(Variable3, Variable3, FALSE)
user_start: setenv(Variable3, Variable3, FALSE)
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
user_start: Started user_main at PID=2
stdio_test: Standard I/O Check: fprintf to stderr
user_main: Begin argument test
user_main: Started with argc=5
user_main: argv[0]="<noname>"
user_main: argv[1]="Arg1"
user_main: argv[2]="Arg2"
user_main: argv[3]="Arg3"
user_main: argv[4]="Arg4"
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 2 2
mxordblk 76b20 76b20
uordblks 33d0 33d0
fordblks 78180 78180
show_variable: Variable=Variable1 has value=GoodValue1
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has value=GoodValue2
show_variable: Variable=Variable3 has value=GoodValue3
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 2 3
mxordblk 76b20 76b20
uordblks 33d0 33c0
fordblks 78180 78190
show_variable: Variable=Variable1 has no value
show_variable: Variable=Variable2 has no value
show_variable: Variable=Variable3 has no value
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 33c0 3380
fordblks 78190 781d0
user_main: /dev/null test
dev_null: Read 0 bytes from /dev/null
dev_null: Wrote 1024 bytes to /dev/null
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: mutex test
Initializing mutex
Starting thread 1
Starting thread 2
Thread1 Thread2
Loops 32 32
Errors 0 0
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: cancel test
cancel_test: Test 1: Normal Cancelation
cancel_test: Starting thread
start_thread: Initializing mutex
start_thread: Initializing cond
start_thread: Starting thread
thread_waiter: Taking mutex
thread_waiter: Starting wait for condition
start_thread: Yielding
cancel_test: Canceling thread
cancel_test: Joining
cancel_test: waiter exited with result=ffffffff
cancel_test: PASS thread terminated with PTHREAD_CANCELED
cancel_test: Test 2: Cancelation of detached thread
cancel_test: Re-starting thread
restart_thread: Destroying cond
restart_thread: Destroying mutex
restart_thread: Re-starting thread
start_thread: Initializing mutex
start_thread: Initializing cond
start_thread: Starting thread
thread_waiter: Taking mutex
thread_waiter: Starting wait for condition
start_thread: Yielding
cancel_test: Canceling thread
cancel_test: Joining
cancel_test: PASS pthread_join failed with status=ESRCH
cancel_test: Test 3: Non-cancelable threads
cancel_test: Re-starting thread (non-cancelable)
restart_thread: Destroying cond
restart_thread: Destroying mutex
restart_thread: Re-starting thread
start_thread: Initializing mutex
start_thread: Initializing cond
start_thread: Starting thread
thread_waiter: Taking mutex
thread_waiter: Starting wait for condition
thread_waiter: Setting non-cancelable
start_thread: Yielding
cancel_test: Canceling thread
cancel_test: Joining
thread_waiter: Releasing mutex
thread_waiter: Setting cancelable
cancel_test: waiter exited with result=ffffffff
cancel_test: PASS thread terminated with PTHREAD_CANCELED
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: semaphore test
sem_test: Initializing semaphore to 0
sem_test: Starting waiter thread 1
sem_test: Set thread 1 priority to 191
waiter_func: Thread 1 Started
waiter_func: Thread 1 initial semaphore value = 0
waiter_func: Thread 1 waiting on semaphore
sem_test: Starting waiter thread 2
sem_test: Set thread 2 priority to 128
waiter_func: Thread 2 Started
waiter_func: Thread 2 initial semaphore value = -1
waiter_func: Thread 2 waiting on semaphore
sem_test: Starting poster thread 3
sem_test: Set thread 3 priority to 64
poster_func: Thread 3 started
poster_func: Thread 3 semaphore value = -2
poster_func: Thread 3 posting semaphore
waiter_func: Thread 1 awakened
waiter_func: Thread 1 new semaphore value = -1
waiter_func: Thread 1 done
poster_func: Thread 3 new semaphore value = -1
poster_func: Thread 3 semaphore value = -1
poster_func: Thread 3 posting semaphore
waiter_func: Thread 2 awakened
waiter_func: Thread 2 new semaphore value = 0
waiter_func: Thread 2 done
poster_func: Thread 3 new semaphore value = 0
poster_func: Thread 3 done
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: condition variable test
cond_test: Initializing mutex
cond_test: Initializing cond
cond_test: Starting waiter
cond_test: Set thread 1 priority to 128
waiter_thread: Started
cond_test: Starting signaler
cond_test: Set thread 2 priority to 64
thread_signaler: Started
thread_signaler: Terminating
cond_test: signaler terminated, now cancel the waiter
cond_test: Waiter Signaler
cond_test: Loops 32 32
cond_test: Errors 0 0
cond_test:
cond_test: 0 times, waiter did not have to wait for data
cond_test: 0 times, data was already available when the signaler run
cond_test: 0 times, the waiter was in an unexpected state when the signaler ran
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: timed wait test
thread_waiter: Initializing mutex
timedwait_test: Initializing cond
timedwait_test: Starting waiter
timedwait_test: Set thread 2 priority to 177
thread_waiter: Taking mutex
thread_waiter: Starting 5 second wait for condition
timedwait_test: Joining
tcb=0x8057d0 sigdeliver=0x13046
rtcb=0x8000c8 current_regs=0xffffbf7a
rtcb=8057d0 sigdeliver=13046 sigpendactionq.head=0
Resuming
thread_waiter: pthread_cond_timedwait timed out
thread_waiter: Releasing mutex
thread_waiter: Exit with status 0x12345678
timedwait_test: waiter exited with result=12345678
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: message queue test
mqueue_test: Starting receiver
mqueue_test: Set receiver priority to 128
receiver_thread: Starting
mqueue_test: Starting sender
mqueue_test: Set sender thread priority to 64
mqueue_test: Waiting for sender to complete
sender_thread: Starting
receiver_thread: mq_receive succeeded on msg 0
sender_thread: mq_send succeeded on msg 0
receiver_thread: mq_receive succeeded on msg 1
sender_thread: mq_send succeeded on msg 1
receiver_thread: mq_receive succeeded on msg 2
sender_thread: mq_send succeeded on msg 2
receiver_thread: mq_receive succeeded on msg 3
sender_thread: mq_send succeeded on msg 3
receiver_thread: mq_receive succeeded on msg 4
sender_thread: mq_send succeeded on msg 4
receiver_thread: mq_receive succeeded on msg 5
sender_thread: mq_send succeeded on msg 5
receiver_thread: mq_receive succeeded on msg 6
sender_thread: mq_send succeeded on msg 6
receiver_thread: mq_receive succeeded on msg 7
sender_thread: mq_send succeeded on msg 7
receiver_thread: mq_receive succeeded on msg 8
sender_thread: mq_send succeeded on msg 8
receiver_thread: mq_receive succeeded on msg 9
sender_thread: mq_send succeeded on msg 9
sender_thread: returning ntcb=0x8057d0 sigdeliver=0x13046
rtcb=0x806e30 current_regs=0x0
rtcb=8057d0 sigdeliver=13046 sigpendactionq.head=0
Resuming
errors=0
mqueue_test: Killing receiver
receiver_thread: mq_receive interrupted!
receiver_thread: returning nerrors=0
mqueue_test: Canceling receiver
mqueue_test: receiver has already terminated
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: timed message queue test
timedmqueue_test: Starting sender
sender_thread: Starting
sender_thread: mq_timedsend succeeded on msg 0
sender_thread: mq_timedsend succeeded on msg 1
timedmqueue_test: Waiting for sender to complete
sender_thread: mq_timedsend succeeded on msg 2
sender_thread: mq_timedsend succeeded on msg 3
sender_thread: mq_timedsend succeeded on msg 4
sender_thread: mq_timedsend succeeded on msg 5
sender_thread: mq_timedsend succeeded on msg 6
sender_thread: mq_timedsend succeeded on msg 7
sender_thread: mq_timedsend succeeded on msg 8
sender_thread: mq_timedsend 9 timed out as expected
sender_thread: returning nerrors=0
timedmqueue_test: Starting receiver
receiver_thread: Starting
receiver_thread: mq_timedreceive succeeded on msg 0
receiver_thread: mq_timedreceive succeeded on msg 1
receiver_thread: mq_timedreceive succeeded on msg 2
receiver_thread: mq_timedreceive succeeded on msg 3
timedmqueue_test: Waiting for receiver to complete
receiver_thread: mq_timedreceive succeeded on msg 4
receiver_thread: mq_timedreceive succeeded on msg 5
receiver_thread: mq_timedreceive succeeded on msg 6
receiver_thread: mq_timedreceive succeeded on msg 7
receiver_thread: mq_timedreceive succeeded on msg 8
receiver_thread: Receive 9 timed out as expected
receiver_thread: returning nerrors=0
timedmqueue_test: Test complete
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 3
mxordblk 76b20 76b20
uordblks 3380 3380
fordblks 781d0 781d0
user_main: signal handler test
sighand_test: Initializing semaphore to 0
sighand_test: Starting waiter task
sighand_test: Started waiter_main pid=20
waiter_main: Waiter started
waiter_main: Unmasking signal 17
waiter_main: Registering signal handler
waiter_main: oact.sigaction=0 oact.sa_flags=0 oact.sa_mask=0
waiter_main: Waiting on semaphore
tcb=0x8057d0 sigdeliver=0x13046
rtcb=0x806e30 current_regs=0x0
sighand_test: Signaling pid=20 with signo=17 sigvalue=42
rtcb=8057d0 sigdeliver=13046 sigpendactionq.head=804b10
Resuming
wakeup_action: Received signal 17
wakeup_action: sival_int=42
wakeup_action: si_code=1
wakeup_action: ucontext=0
waiter_main: sem_wait() successfully interrupted by signal
waiter_main: done
sighand_test: done
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 3 4
mxordblk 76b20 76b20
uordblks 3380 35c0
fordblks 781d0 77f90
user_main: POSIX timer test
timer_test: Initializing semaphore to 0
timer_test: Unmasking signal 17
timer_test: Registering signal handler
timer_test: oact.sigaction=0 oact.sa_flags=0 oact.sa_mask=0
timer_test: Creating timer
timer_test: Starting timer
timer_test: Waiting on semaphore
tcb=0x806e30 sigdeliver=0x13046
rtcb=0x8000c8 current_regs=0xffffbf7a
rtcb=806e30 sigdeliver=13046 sigpendactionq.head=804b23
Resuming
timer_expiration: Received signal 17
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=1
timer_test: Waiting on semaphore
tcb=0x806e30 sigdeliver=0x13046
rtcb=0x8000c8 current_regs=0xffffbf7a
rtcb=806e30 sigdeliver=13046 sigpendactionq.head=804b36
Resuming
timer_expiration: Received signal 17
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=2
timer_test: Waiting on semaphore
tcb=0x806e30 sigdeliver=0x13046
rtcb=0x8000c8 current_regs=0xffffbf7a
rtcb=806e30 sigdeliver=13046 sigpendactionq.head=804b49
Resuming
timer_expiration: Received signal 17
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=3
timer_test: Waiting on semaphore
tcb=0x806e30 sigdeliver=0x13046
rtcb=0x8000c8 current_regs=0xffffbf76
rtcb=806e30 sigdeliver=13046 sigpendactionq.head=804b5c
Resuming
timer_expiration: Received signal 17
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=4
timer_test: Waiting on semaphore
tcb=0x806e30 sigdeliver=0x13046
rtcb=0x8000c8 current_regs=0xffffbf66
rtcb=806e30 sigdeliver=13046 sigpendactionq.head=804b6f
Resuming
timer_expiration: Received signal 17
timer_expiration: sival_int=42
timer_expiration: si_code=2 (SI_TIMER)
timer_expiration: ucontext=0
timer_test: sem_wait() successfully interrupted by signal
timer_test: g_nsigreceived=5
timer_test: Deleting timer
timer_test: done
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 4 4
mxordblk 76b20 76b20
uordblks 35c0 35c0
fordblks 77f90 77f90
user_main: round-robin scheduler test
rr_test: Starting sieve1 thread
rr_test: Set thread priority to 1
rr_test: Set thread policty to SCHED_RR
rr_test: Starting sieve1 thread
sieve1 started
rr_test: Waiting for sieves to complete -- this should take awhile
rr_test: If RR scheduling is working, they should start and complete at
rr_test: about the same time
sieve2 started
sieve1 finished
sieve2 finished
rr_test: Done
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 4 4
mxordblk 76b20 76b20
uordblks 35c0 35c0
fordblks 77f90 77f90
user_main: barrier test
barrier_test: Initializing barrier
barrier_func: Thread 0 started
barrier_test: Thread 0 created
barrier_func: Thread 1 started
barrier_test: Thread 1 created
barrier_func: Thread 2 started
barrier_test: Thread 2 created
barrier_func: Thread 3 started
barrier_test: Thread 3 created
barrier_func: Thread 0 calling pthread_barrier_wait()
barrier_func: Thread 1 calling pthread_barrier_wait()
barrier_func: Thread 2 calling pthread_barrier_wait()
barrier_func: Thread 4 started
barrier_test: Thread 4 created
barrier_func: Thread 3 calling pthread_barrier_wait()
barrier_func: Thread 4 calling pthread_barrier_wait()
barrier_func: Thread 5 started
barrier_test: Thread 5 created
barrier_func: Thread 6 started
barrier_test: Thread 6 created
barrier_func: Thread 7 started
barrier_test: Thread 7 created
barrier_func: Thread 5 calling pthread_barrier_wait()
barrier_func: Thread 6 calling pthread_barrier_wait()
barrier_func: Thread 7 calling pthread_barrier_wait()
barrier_func: Thread 7, back with status=PTHREAD_BARRIER_SERIAL_THREAD (I AM SPECIAL)
barrier_func: Thread 0, back with status=0 (I am not special)
barrier_func: Thread 1, back with status=0 (I am not special)
barrier_func: Thread 2, back with status=0 (I am not special)
barrier_func: Thread 3, back with status=0 (I am not special)
barrier_func: Thread 4, back with status=0 (I am not special)
barrier_func: Thread 5, back with status=0 (I am not special)
barrier_func: Thread 6, back with status=0 (I am not special)
barrier_func: Thread 2 done
barrier_func: Thread 7 done
barrier_func: Thread 0 done
barrier_func: Thread 1 done
barrier_func: Thread 6 done
barrier_func: Thread 3 done
barrier_func: Thread 4 done
barrier_func: Thread 5 done
barrier_test: Thread 0 completed with result=0
barrier_test: Thread 1 completed with result=0
barrier_test: Thread 2 completed with result=0
barrier_test: Thread 3 completed with result=0
barrier_test: Thread 4 completed with result=0
barrier_test: Thread 5 completed with result=0
barrier_test: Thread 6 completed with result=0
barrier_test: Thread 7 completed with result=0
End of test memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 4 4
mxordblk 76b20 76b20
uordblks 35c0 35c0
fordblks 77f90 77f90
Final memory usage:
VARIABLE BEFORE AFTER
======== ======== ========
arena 7b550 7b550
ordblks 2 4
mxordblk 76b20 76b20
uordblks 33d0 35c0
fordblks 78180 77f90
user_main: Exitting

84
configs/ez80f910200zco/src/Makefile Normal file
View File

@ -0,0 +1,84 @@
############################################################################
# configs/ez80f910200zco/Makefile
#
# Copyright (C) 2008 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
ARCHSRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
WARCHSRCDIR = ${shell cygpath -w $(ARCHSRCDIR)}
USRINCLUDES = -usrinc:'.;$(WTOPDIR)\sched;$(WARCHSRCDIR);$(WARCHSRCDIR)\common'
INCLUDES = $(ARCHSTDINCLUDES) $(USRINCLUDES)
CFLAGS = $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(INCLUDES) $(ARCHDEFINES)
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = ez80_lowinit.c ez80_leds.c
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
all: libboard$(LIBEXT)
$(ASRCS) $(HEAD_ASRC): %$(ASMEXT): %.S
@$(CPP) $(CPPFLAGS) `cygpath -w $<` -o $@.tmp
@cat $@.tmp | sed -e "s/^#/;/g" > $@
@rm $@.tmp
$(AOBJS): %$(OBJEXT): %$(ASMEXT)
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, `cygpath -w $<`, $@)
libboard$(LIBEXT): $(OBJS)
@( for obj in $(OBJS) ; do \
$(call ARCHIVE, $@, $${obj}); \
done ; )
.depend: Makefile $(SRCS)
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
@touch $@
depend: .depend
clean:
@rm -f libboard$(LIBEXT) *~ .*.swp
$(call CLEAN)
distclean: clean
@rm -f Make.dep .depend
-include Make.dep

89
configs/ez80f910200zco/src/ez80_leds.c Normal file
View File

@ -0,0 +1,89 @@
/****************************************************************************
* configs/ez80f910200zco/src/ez80_leds.c
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include <arch/board/board.h>
#include "up_internal.h"
/****************************************************************************
* Definitions
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
#ifdef CONFIG_ARCH_LEDS
void up_ledinit(void)
{
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
}
#endif /* CONFIG_ARCH_LEDS */

67
configs/ez80f910200zco/src/ez80_lowinit.c Normal file
View File

@ -0,0 +1,67 @@
/***************************************************************************
* configs/ez80f910200zco/src/ez80_lowinit.c
*
* Copyright (C) 2008 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Based upon sample code included with the Zilog ZDS-II toolchain.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
***************************************************************************/
/***************************************************************************
* Included Files
***************************************************************************/
#include <nuttx/config.h>
#include <sys/types.h>
#include "chip/chip.h"
/***************************************************************************
* Definitions
***************************************************************************/
/***************************************************************************
* Private Functions
***************************************************************************/
static void ez80_gpioinit(void)
{
}
/***************************************************************************
* Public Functions
***************************************************************************/
void ez80_lowinit(void)
{
ez80_gpioinit();
}