Add LPC43 clock initialization logic
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4910 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
06d5e7224a
commit
e0b01efe74
@ -406,6 +406,21 @@ LPC4330-Xplorer Configuration Options
|
|||||||
CONFIG_ARCH_FPU - The LPC43xxx supports a floating point unit (FPU)
|
CONFIG_ARCH_FPU - The LPC43xxx supports a floating point unit (FPU)
|
||||||
|
|
||||||
CONFIG_ARCH_FPU=y
|
CONFIG_ARCH_FPU=y
|
||||||
|
|
||||||
|
CONFIG_BOOT_xxx - The startup code needs to know if the code is running
|
||||||
|
from internal FLASH, external FLASH, SPIFI, or SRAM in order to
|
||||||
|
initialize properly. Note that a boot device is not specified for
|
||||||
|
cases where the code is copied into SRAM; those cases are all covered
|
||||||
|
by CONFIG_BOOT_SRAM.
|
||||||
|
|
||||||
|
CONFIG_BOOT_SRAM=y : Running from SRAM (0x1000:0000)
|
||||||
|
CONFIG_BOOT_SPIFI=y : Running from QuadFLASH (0x1400:0000)
|
||||||
|
CONFIG_BOOT_FLASHA=y : Running in internal FLASHA (0x1a00:0000)
|
||||||
|
CONFIG_BOOT_FLASHB=y : Running in internal FLASHA (0x1b00:0000)
|
||||||
|
CONFIG_BOOT_CS0FLASH=y : Running in external FLASH CS0 (0x1c00:0000)
|
||||||
|
CONFIG_BOOT_CS1FLASH=y : Running in external FLASH CS1 (0x1d00:0000)
|
||||||
|
CONFIG_BOOT_CS2FLASH=y : Running in external FLASH CS2 (0x1e00:0000)
|
||||||
|
CONFIG_BOOT_CS3FLASH=y : Running in external FLASH CS3 (0x1f00:0000)
|
||||||
|
|
||||||
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
|
||||||
have LEDs
|
have LEDs
|
||||||
|
|||||||
@ -53,14 +53,40 @@
|
|||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
|
||||||
/* Clocking ****************************************************************/
|
/* Clocking ****************************************************************/
|
||||||
/* NOTE: The following definitions require lpc43_syscon.h. It is not included here
|
/* NOTE: The following definitions require lpc43_cgu.h. It is not included
|
||||||
* because the including C file may not have that file in its include path.
|
* here because the including C file may not have that file in its include
|
||||||
|
* path.
|
||||||
|
*
|
||||||
|
* The Xplorer board has four crystals on board:
|
||||||
|
*
|
||||||
|
* Y1 - RTC 32.768 MHz oscillator input,
|
||||||
|
* Y2 - 24.576 MHz input to the UDA 1380 audio codec,
|
||||||
|
* Y3 - 12.000 MHz LPC43xx crystal oscillator input
|
||||||
|
* Y4 - 50 MHz input for Ethernet
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency */
|
#define BOARD_XTAL_FREQUENCY (12000000) /* XTAL oscillator frequency (Y3) */
|
||||||
#define BOARD_OSCCLK_FREQUENCY BOARD_XTAL_FREQUENCY /* Main oscillator frequency */
|
#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency (Y1) */
|
||||||
#define BOARD_RTCCLK_FREQUENCY (32768) /* RTC oscillator frequency */
|
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
|
||||||
#define BOARD_INTRCOSC_FREQUENCY (4000000) /* Internal RC oscillator frequency */
|
|
||||||
|
/* Integer and direct modes are supported:
|
||||||
|
*
|
||||||
|
* In integer mode:
|
||||||
|
* Fclkin = BOARD_XTAL_FREQUENCY
|
||||||
|
* Fclkout = Msel * FClkin / Nsel
|
||||||
|
* Fcco = 2 * Psel * Nclkout
|
||||||
|
* In direct mode:
|
||||||
|
* Fclkin = BOARD_XTAL_FREQUENCY
|
||||||
|
* Fclkout = Msel * FClkin / Nsel
|
||||||
|
* Fcco = Fclkout
|
||||||
|
*/
|
||||||
|
|
||||||
|
#undef BOARD_PLL1_DIRECT /* Integer mode */
|
||||||
|
#define BOARD_PLL_MSEL (6) /* Msel = 6 */
|
||||||
|
#define BOARD_PLL_NSEL (1) /* Nsel = 1 */
|
||||||
|
#define BOARD_PLL_PSEL (2) /* Psel = 2 */
|
||||||
|
#define BOARD_FCLKOUT_FREQUENCY (72000000) /* 6 * 12,000,000 / 1 */
|
||||||
|
#define BOARD_FCCO_FREQUENCY (244000000) /* 2 * 2 * 72,000,000 */
|
||||||
|
|
||||||
/* This is the clock setup we configure for:
|
/* This is the clock setup we configure for:
|
||||||
*
|
*
|
||||||
@ -69,64 +95,7 @@
|
|||||||
* CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
|
* CCLCK = 480MHz / 6 = 80MHz -> CCLK divider = 6
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#define LPC43_CCLK 80000000 /* 80Mhz*/
|
#define LPC43_CCLK BOARD_FCLKOUT_FREQUENCY
|
||||||
|
|
||||||
/* Select the main oscillator as the frequency source. SYSCLK is then the frequency
|
|
||||||
* of the main oscillator.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#undef CONFIG_LPC43_MAINOSC
|
|
||||||
#define CONFIG_LPC43_MAINOSC 1
|
|
||||||
#define BOARD_SCS_VALUE SYSCON_SCS_OSCEN
|
|
||||||
|
|
||||||
/* Select the main oscillator and CCLK divider. The output of the divider is CCLK.
|
|
||||||
* The input to the divider (PLLCLK) will be determined by the PLL output.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define BOARD_CCLKCFG_DIVIDER 6
|
|
||||||
#define BOARD_CCLKCFG_VALUE ((BOARD_CCLKCFG_DIVIDER-1) << SYSCON_CCLKCFG_SHIFT)
|
|
||||||
|
|
||||||
/* PLL0. PLL0 is used to generate the CPU clock divider input (PLLCLK).
|
|
||||||
*
|
|
||||||
* Source clock: Main oscillator
|
|
||||||
* PLL0 Multiplier value (M): 20
|
|
||||||
* PLL0 Pre-divider value (N): 1
|
|
||||||
*
|
|
||||||
* PLL0CLK = (2 * 20 * SYSCLK) / 1 = 480MHz
|
|
||||||
*/
|
|
||||||
|
|
||||||
#undef CONFIG_LPC43_PLL0
|
|
||||||
#define CONFIG_LPC43_PLL0 1
|
|
||||||
#define BOARD_CLKSRCSEL_VALUE SYSCON_CLKSRCSEL_MAIN
|
|
||||||
|
|
||||||
#define BOARD_PLL0CFG_MSEL 20
|
|
||||||
#define BOARD_PLL0CFG_NSEL 1
|
|
||||||
#define BOARD_PLL0CFG_VALUE \
|
|
||||||
(((BOARD_PLL0CFG_MSEL-1) << SYSCON_PLL0CFG_MSEL_SHIFT) | \
|
|
||||||
((BOARD_PLL0CFG_NSEL-1) << SYSCON_PLL0CFG_NSEL_SHIFT))
|
|
||||||
|
|
||||||
/* PLL1 -- Not used. */
|
|
||||||
|
|
||||||
#undef CONFIG_LPC43_PLL1
|
|
||||||
#define BOARD_PLL1CFG_MSEL 36
|
|
||||||
#define BOARD_PLL1CFG_NSEL 1
|
|
||||||
#define BOARD_PLL1CFG_VALUE \
|
|
||||||
(((BOARD_PLL1CFG_MSEL-1) << SYSCON_PLL1CFG_MSEL_SHIFT) | \
|
|
||||||
((BOARD_PLL1CFG_NSEL-1) << SYSCON_PLL1CFG_NSEL_SHIFT))
|
|
||||||
|
|
||||||
/* USB divider. This divider is used when PLL1 is not enabled to get the
|
|
||||||
* USB clock from PLL0:
|
|
||||||
*
|
|
||||||
* USBCLK = PLL0CLK / 10 = 48MHz
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define BOARD_USBCLKCFG_VALUE SYSCON_USBCLKCFG_DIV10
|
|
||||||
|
|
||||||
/* FLASH Configuration */
|
|
||||||
|
|
||||||
#undef CONFIG_LP17_FLASH
|
|
||||||
#define CONFIG_LP17_FLASH 1
|
|
||||||
#define BOARD_FLASHCFG_VALUE 0x0000303a
|
|
||||||
|
|
||||||
/* LED definitions *********************************************************/
|
/* LED definitions *********************************************************/
|
||||||
/* The LPC4330-Xplorer has 2 user-controllable LEDs labeled D2 an D3 in the
|
/* The LPC4330-Xplorer has 2 user-controllable LEDs labeled D2 an D3 in the
|
||||||
|
|||||||
@ -87,6 +87,26 @@ ifeq ($(CONFIG_LPC43_BUILDROOT),y)
|
|||||||
MAXOPTIMIZATION = -Os
|
MAXOPTIMIZATION = -Os
|
||||||
endif
|
endif
|
||||||
|
|
||||||
|
# Setup for the kind of memory that we are executing from
|
||||||
|
|
||||||
|
ifeq ($(CONFIG_BOOT_SRAM),y)
|
||||||
|
LDSCRIPT = ramconfig.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_BOOT_SPIFI),y)
|
||||||
|
LDSCRIPT = spiconfig.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_BOOT_FLASHA),y)
|
||||||
|
LDSCRIPT = flashaconfig.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_BOOT_FLASHB),y)
|
||||||
|
LDSCRIPT = flashaconfig.ld
|
||||||
|
endif
|
||||||
|
ifeq ($(CONFIG_BOOT_CS0FLASH),y)
|
||||||
|
LDSCRIPT = cs0flash.ld
|
||||||
|
endif
|
||||||
|
|
||||||
|
# Setup for Windows vs Linux/Cygwin/OSX environments
|
||||||
|
|
||||||
ifeq ($(WINTOOL),y)
|
ifeq ($(WINTOOL),y)
|
||||||
# Windows-native toolchains
|
# Windows-native toolchains
|
||||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||||
@ -94,14 +114,14 @@ ifeq ($(WINTOOL),y)
|
|||||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ramconfig.ld}"
|
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}"
|
||||||
MAXOPTIMIZATION = -O2
|
MAXOPTIMIZATION = -O2
|
||||||
else
|
else
|
||||||
# Linux/Cygwin-native toolchain
|
# Linux/Cygwin-native toolchain
|
||||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ramconfig.ld
|
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)
|
||||||
endif
|
endif
|
||||||
|
|
||||||
CC = $(CROSSDEV)gcc
|
CC = $(CROSSDEV)gcc
|
||||||
|
|||||||
@ -96,6 +96,31 @@ CONFIG_ARCH_CALIBRATION=n
|
|||||||
CONFIG_ARCH_DMA=n
|
CONFIG_ARCH_DMA=n
|
||||||
CONFIG_ARMV7M_CMNVECTOR=y
|
CONFIG_ARMV7M_CMNVECTOR=y
|
||||||
|
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_xxx - The startup code needs to know if the code is running
|
||||||
|
# from internal FLASH, external FLASH, SPIFI, or SRAM in order to
|
||||||
|
# initialize properly. Note that a boot device is not specified for
|
||||||
|
# cases where the code is copied into SRAM; those cases are all covered
|
||||||
|
# by CONFIG_BOOT_SRAM.
|
||||||
|
#
|
||||||
|
# CONFIG_BOOT_SRAM=y : Running from SRAM (0x1000:0000)
|
||||||
|
# CONFIG_BOOT_SPIFI=y : Running from QuadFLASH (0x1400:0000)
|
||||||
|
# CONFIG_BOOT_FLASHA=y : Running in internal FLASHA (0x1a00:0000)
|
||||||
|
# CONFIG_BOOT_FLASHB=y : Running in internal FLASHA (0x1b00:0000)
|
||||||
|
# CONFIG_BOOT_CS0FLASH=y : Running in external FLASH CS0 (0x1c00:0000)
|
||||||
|
# CONFIG_BOOT_CS1FLASH=y : Running in external FLASH CS1 (0x1d00:0000)
|
||||||
|
# CONFIG_BOOT_CS2FLASH=y : Running in external FLASH CS2 (0x1e00:0000)
|
||||||
|
# CONFIG_BOOT_CS3FLASH=y : Running in external FLASH CS3 (0x1f00:0000)
|
||||||
|
#
|
||||||
|
CONFIG_BOOT_SRAM=y
|
||||||
|
CONFIG_BOOT_SPIFI=n
|
||||||
|
CONFIG_BOOT_FLASHA=n
|
||||||
|
CONFIG_BOOT_FLASHB=n
|
||||||
|
CONFIG_BOOT_CS0FLASH=n
|
||||||
|
CONFIG_BOOT_CS1FLASH=n
|
||||||
|
CONFIG_BOOT_CS2FLASH=n
|
||||||
|
CONFIG_BOOT_CS3FLASH=n
|
||||||
|
|
||||||
#
|
#
|
||||||
# Identify toolchain and linker options
|
# Identify toolchain and linker options
|
||||||
#
|
#
|
||||||
|
|||||||
@ -32,6 +32,27 @@
|
|||||||
* POSSIBILITY OF SUCH DAMAGE.
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
*
|
*
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
/*
|
||||||
|
* Power-Up Reset Overview
|
||||||
|
* -----------------------
|
||||||
|
*
|
||||||
|
* The ARM core starts executing code on reset with the program counter set
|
||||||
|
* to 0x0000 0000. The LPC43xx contains a shadow pointer register that
|
||||||
|
* allows areas of memory to be mapped to address 0x0000 0000. The default,
|
||||||
|
* reset value of the shadow pointer is 0x1040 0000 so that on reset code in
|
||||||
|
* the boot ROM is always executed first.
|
||||||
|
*
|
||||||
|
* The boot starts after reset is released. The IRC is selected as CPU clock
|
||||||
|
* and the Cortex-M4 starts the boot loader. By default the JTAG access to the
|
||||||
|
* chip is disabled at reset. The boot ROM determines the boot mode based on
|
||||||
|
* the OTP BOOT_SRC value or reset state pins. For flash-based parts, the part
|
||||||
|
* boots from internal flash by default. Otherwse, the boot ROM copies the
|
||||||
|
* image to internal SRAM at location 0x1000 0000, sets the ARM's shadow
|
||||||
|
* pointer to 0x1000 0000, and jumps to that location.
|
||||||
|
*
|
||||||
|
* However, using JTAG the executable image can be also loaded directly into
|
||||||
|
* and executed from SRAM.
|
||||||
|
*/
|
||||||
|
|
||||||
/* The LPC4330 on the LPC4330-Xplorer has the following memory resources:
|
/* The LPC4330 on the LPC4330-Xplorer has the following memory resources:
|
||||||
*
|
*
|
||||||
@ -41,6 +62,7 @@
|
|||||||
* b. 72KB beginning at address 0x1008:0000 and
|
* b. 72KB beginning at address 0x1008:0000 and
|
||||||
* c. 64KB of AHB SRAM in three banks beginning at addresses 0x2000:0000,
|
* c. 64KB of AHB SRAM in three banks beginning at addresses 0x2000:0000,
|
||||||
* 0x2000:8000 and 0x2000:C000.
|
* 0x2000:8000 and 0x2000:C000.
|
||||||
|
* 3. No internal FLASH
|
||||||
*
|
*
|
||||||
* Here we assume that:
|
* Here we assume that:
|
||||||
*
|
*
|
||||||
|
|||||||
@ -32,6 +32,27 @@
|
|||||||
* POSSIBILITY OF SUCH DAMAGE.
|
* POSSIBILITY OF SUCH DAMAGE.
|
||||||
*
|
*
|
||||||
****************************************************************************/
|
****************************************************************************/
|
||||||
|
/*
|
||||||
|
* Power-Up Reset Overview
|
||||||
|
* -----------------------
|
||||||
|
*
|
||||||
|
* The ARM core starts executing code on reset with the program counter set
|
||||||
|
* to 0x0000 0000. The LPC43xx contains a shadow pointer register that
|
||||||
|
* allows areas of memory to be mapped to address 0x0000 0000. The default,
|
||||||
|
* reset value of the shadow pointer is 0x1040 0000 so that on reset code in
|
||||||
|
* the boot ROM is always executed first.
|
||||||
|
*
|
||||||
|
* The boot starts after reset is released. The IRC is selected as CPU clock
|
||||||
|
* and the Cortex-M4 starts the boot loader. By default the JTAG access to the
|
||||||
|
* chip is disabled at reset. The boot ROM determines the boot mode based on
|
||||||
|
* the OTP BOOT_SRC value or reset state pins. For flash-based parts, the part
|
||||||
|
* boots from internal flash by default. Otherwse, the boot ROM copies the
|
||||||
|
* image to internal SRAM at location 0x1000 0000, sets the ARM's shadow
|
||||||
|
* pointer to 0x1000 0000, and jumps to that location.
|
||||||
|
*
|
||||||
|
* Of course, using JTAG the executable image can be also loaded directly
|
||||||
|
* into and executed from SRAM.
|
||||||
|
*/
|
||||||
|
|
||||||
/* The LPC4330 on the LPC4330-Xplorer has the following memory resources:
|
/* The LPC4330 on the LPC4330-Xplorer has the following memory resources:
|
||||||
*
|
*
|
||||||
@ -41,6 +62,7 @@
|
|||||||
* b. 72KB beginning at address 0x1008:0000 and
|
* b. 72KB beginning at address 0x1008:0000 and
|
||||||
* c. 64KB of AHB SRAM in three banks beginning at addresses 0x2000:0000,
|
* c. 64KB of AHB SRAM in three banks beginning at addresses 0x2000:0000,
|
||||||
* 0x2000:8000 and 0x2000:C000.
|
* 0x2000:8000 and 0x2000:C000.
|
||||||
|
* 3. No internal FLASH
|
||||||
*
|
*
|
||||||
* Here we assume that:
|
* Here we assume that:
|
||||||
*
|
*
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user