sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add a general bit-bang SPI lower-half driver and implement the bit-bang driver for the Arduino ITEAD TFT shield

Browse Source
This commit is contained in:
Gregory Nutt 2013-07-01 16:50:16 -06:00
parent 8b68ea2f94
commit e1dab23711
13 changed files with 1176 additions and 100 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
ChangeLog
View File

@ -5019,7 +5019,7 @@
controlling SPI-related discrete inputs and outputs. Taken from
work by Alan Carvalho de Assis (2013-6-20).
* arch/arm/src/kl/kl_dumpgpio.c: Now compiles (2013-6-20).
* configs/: Several defconfig files were changed that had
* configs/: Several defconfig files were changed that had
CONFIG_HAVE_CXXINITIALIZE=y. Because of recent changes to
apps/examples, these configurations may need to have
CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y so that they behave as they did
@ -5091,7 +5091,7 @@
fix to the sam3u_gpio.c write protection also fixed the touchscreen
problem (2013-6-28).
* confgis/sam3u_ek/nxwm: Created a configuration for the NxWM
window manager for the SAM3U-EK board.
window manager for the SAM3U-EK board (2013-6-29).
* drivers/spi and include/nuttx/spi: New sub-directories to hold
SPI-related files. includes/nuttx/spi.h moved to include/nuttx/spi/.;
SPI-related Kconfig info moved from drivers/Kconfig to drivers/spi/kconfig
@ -5099,4 +5099,8 @@
* drivers/spi/spi_bitbang.c and include/nuttx/spi/spi_bitbang.h: Add
support for a generic bit-bang SPI driver. This checkout is the
common upper-half logic. Still missing the lower half (2013-7-1).
* include/nuttx/spi/spi_bitbang.c: This is the common lower-half bit-
bang SPI logic (2013-7-1).
* configs/arduino-due/src/sam_nsh.c and sam_mmcsd.c: Add NSH customize
initialization. If so configured, initialize the SPI bit bang
interface to the MMC/SD slot on the ITEAD shield (2013-7-1).

93
configs/arduino-due/README.txt
View File

@ -890,55 +890,70 @@ Configuration sub-directories
This configuration directory will built the NuttShell. See NOTES above.
NOTES:
1. The configuration configuration can be modified to include support
for the on-board SRAM (1MB).
1. If the ITEAD TFT shield is connected to the Arduino Due, then
support for the SD card slot can be enabled by making the following
changes to the configuration:
System Type -> External Memory Configuration
CONFIG_ARCH_EXTSRAM0=y : Select SRAM on CS0
CONFIG_ARCH_EXTSRAM0SIZE=1048576 : Size=1MB
Board Selection -> Peripheral
CONFIG_SAM34_UART0=n : Disable UART0. Can't use with this shield
CONFIG_SAM34_USART0=y : Enable USART0
CONFIG_USART0_ISUART=y
Now what are you going to do with the SRAM. There are two choices:
Device Drivers -> Serial
CONFIG_USART0_SERIAL_CONSOLE=y : Configure the console on USART0
CONFIG_USART0_RXBUFSIZE=256
CONFIG_USART0_TXBUFSIZE=256
CONFIG_USART0_BAUD=115200
CONFIG_USART0_BITS=8
CONFIG_USART0_PARITY=0
CONFIG_USART0_2STOP=0
a) To enable the NuttX RAM test that may be used to verify the
external SRAM:
NOTE: USART0 TTL levels are available on COMM 5 (TXD0) and
COMM 6 (RXD0)
System Type -> External Memory Configuration
CONFIG_ARCH_EXTSRAM0HEAP=n : Don't add to heap
Board Selection -> Board-Specific Options:
CONFIG_ARCH_LEDS=n : Can't support LEDs with this shield installed
CONFIG_ARDUINO_ITHEAD_TFT=y : Enable support for the Shield
Application Configuration -> System NSH Add-Ons
CONFIG_SYSTEM_RAMTEST=y : Enable the RAM test built-in
NOTE: You cannot use UART0 or LEDs with this ITEAD module.
In this configuration, the SDRAM is not added to heap and so is
not excessible to the applications. So the RAM test can be
freely executed against the SRAM memory beginning at address
0x6000:0000 (CS0).
File Systems:
CONFIG_DISABLE_MOUNTPOINT=n : Mountpoint support is needed
CONFIG_FS_FAT=y : Enable the FAT file system
CONFIG_FAT_LCNAMES=y : Enable upper/lower case 8.3 file names (Optional, see below)
CONFIG_FAT_LFN=y : Enable long file named (Optional, see below)
CONFIG_FAT_MAXFNAME=32 : Maximum supported file name length
nsh> ramtest -h
Usage: <noname> [-w|h|b] <hex-address> <decimal-size>
There are issues related to patents that Microsoft holds on FAT long
file name technologies. See the top level COPYING file for further
details.
Where:
<hex-address> starting address of the test.
<decimal-size> number of memory locations (in bytes).
-w Sets the width of a memory location to 32-bits.
-h Sets the width of a memory location to 16-bits (default).
-b Sets the width of a memory location to 8-bits.
System Type -> Peripherals:
CONFIG_SAM34_SPI0=y : Enable the SAM4L SPI peripheral
To test the entire external SRAM:
Device Drivers
CONFIG_SPI=y : Enable SPI support
CONFIG_SPI_EXCHANGE=y : The exchange() method is supported
CONFIG_SPI_OWNBUS=y : Smaller code if this is the only SPI device
CONFIG_SPI_BITBANG=y : Enable SPI bit-bang support
nsh> ramtest 60000000 1048576
RAMTest: Marching ones: 60000000 1048576
RAMTest: Marching zeroes: 60000000 1048576
RAMTest: Pattern test: 60000000 1048576 55555555 aaaaaaaa
RAMTest: Pattern test: 60000000 1048576 66666666 99999999
RAMTest: Pattern test: 60000000 1048576 33333333 cccccccc
RAMTest: Address-in-address test: 60000000 1048576
CONFIG_MMCSD=y : Enable MMC/SD support
CONFIG_MMCSD_NSLOTS=1 : Only one MMC/SD card slot
CONFIG_MMCSD_MULTIBLOCK_DISABLE=n : Should not need to disable multi-block transfers
CONFIG_MMCSD_HAVECARDDETECT=y : I/O1 module as a card detect GPIO
CONFIG_MMCSD_SPI=y : Use the SPI interface to the MMC/SD card
CONFIG_MMCSD_SPICLOCK=20000000 : This is a guess for the optimal MMC/SD frequency
CONFIG_MMCSD_SPIMODE=0 : Mode 0 is required
b) To add this RAM to the NuttX heap, you would need to change the
configuration as follows:
Board Selection -> Common Board Options
CONFIG_NSH_ARCHINIT=y : Initialize the MMC/SD slot when NSH starts
CONFIG_NSH_MMCSDSLOTNO=0 : Only one MMC/SD slot, slot 0
CONFIG_NSH_MMCSDSPIPORTNO=0 : (does not really matter in this case)
System Type -> External Memory Configuration
CONFIG_ARCH_EXTSRAM0HEAP=y : Add external RAM to heap
Board Selection -> SAM4L Xplained Pro Modules
CONFIG_SAM4L_XPLAINED_IOMODULE=y : I/O1 module is connected
CONFIG_SAM4L_XPLAINED_IOMODULE_EXT1=y : In EXT1, or EXT2
CONFIG_SAM4L_XPLAINED_IOMODULE_EXT2=y
Memory Management
-CONFIG_MM_REGIONS=1 : Only the internal SRAM
+CONFIG_MM_REGIONS=2 : Also include external SRAM
Application Configuration -> NSH Library
CONFIG_NSH_ARCHINIT=y : Board has architecture-specific initialization

5
configs/arduino-due/nsh/setenv.sh
View File

@ -69,7 +69,10 @@ fi
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# This is the Cygwin path to the location where I have the Arduino BOSSA program
export BOSSA_BIN="/cygdrive/c/Program Files (x86)/Arduino/arduino-1.5.2/hardware/tools"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
export PATH="${TOOLCHAIN_BIN}:${BOSSA_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

5
configs/arduino-due/ostest/setenv.sh
View File

@ -69,7 +69,10 @@ fi
# toolchain.
export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
# This is the Cygwin path to the location where I have the Arduino BOSSA program
export BOSSA_BIN="/cygdrive/c/Program Files (x86)/Arduino/arduino-1.5.2/hardware/tools"
# Add the path to the toolchain to the PATH varialble
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
export PATH="${TOOLCHAIN_BIN}:${BOSSA_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

6
configs/arduino-due/src/Makefile
View File

@ -55,7 +55,7 @@ endif
ifeq ($(CONFIG_ARDUINO_ITHEAD_TFT),y)
ifeq ($(CONFIG_SPI_BITBANG),y)
ifeq ($(CONFIG_MMC_SPI),y)
ifeq ($(CONFIG_MMCSD_SPI),y)
CSRCS += sam_mmcsd.c
endif
@ -69,6 +69,10 @@ CSRCS += sam_lcd.c
endif
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += sam_nsh.c
endif
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)

56
configs/arduino-due/src/arduino-due.h
View File

@ -173,7 +173,7 @@
* SPI bit-bang driver as well as support for SPI-based MMC/SD cards.
*/
# if defined(CONFIG_SPI_BITBANG) && defined(CONFIG_MMC_SPI)
# if defined(CONFIG_SPI_BITBANG) && defined(CONFIG_MMCSD_SPI)
/* The SD slot shares the pin with LED "L" so LED support must be disabled
* to use the MMC/SD card on the ITEAD shield.
@ -183,13 +183,13 @@
# error LEDs may not be used with the ITEAD SD card
# endif
# define GPIO_SD_SCK (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_SD_SCK (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOB | GPIO_PIN27)
# define GPIO_SD_MISO (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_SD_MISO (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOD | GPIO_PIN8)
# define GPIO_SD_MOSI (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_SD_MOSI (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOD | GPIO_PIN7)
# define GPIO_SD_CS (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_CLR | \
# define GPIO_SD_CS (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIO? | GPIO_PIN?)
# endif
@ -198,13 +198,13 @@
*/
# if defined(CONFIG_SPI_BITBANG) && defined(CONFIG_INPUT)
# define GPIO_TSC_SCK (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_TSC_SCK (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN24)
# define GPIO_TSC_MISO (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_TSC_MISO (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN21)
# define GPIO_TSC_MOSI (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_TSC_MOSI (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN16)
# define GPIO_TSC_CS (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_CLR | \
# define GPIO_TSC_CS (GPIO_OUTPUT | GPIO_CFG_PULLUP | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIO? | GPIO_PIN?)
# define GPIO_TSC_IRQ (GPIO_INPUT | GPIO_CFG_PULLUP | GPIO_INT_BOTHEDGES | \
GPIO_PORT_PIOC | GPIO_PIN22)
@ -227,29 +227,29 @@
* either inputs or outputs as needed.
*/
# define GPIO_LCD_D0IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D0IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN8)
# define GPIO_LCD_D1IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D1IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN9)
# define GPIO_LCD_D2IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D2IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOB | GPIO_PIN25)
# define GPIO_LCD_D3IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D3IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN28)
# define GPIO_LCD_D4IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D4IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN26)
# define GPIO_LCD_D5IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D5IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN25)
# define GPIO_LCD_D6IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D6IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN24)
# define GPIO_LCD_D7IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D7IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN23)
# define GPIO_LCD_D7IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_D7IN (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOC | GPIO_PIN23)
# define GPIO_LCD_CS (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_CS (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN22)
# define GPIO_LCD_WR (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_WR (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN6)
# define GPIO_LCD_RS (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLR | \
# define GPIO_LCD_RS (GPIO_OUTPUT | GPIO_CFG_DEFAULT | GPIO_OUTPUT_CLEAR | \
GPIO_PORT_PIOA | GPIO_PIN4)
# endif
#endif
@ -288,6 +288,20 @@ void sam_sram_initialize(void);
void up_ledinit(void);
#endif
/****************************************************************************
* Name: sam_sdinitialize
*
* Description:
* Initialize the SPI-based SD card.
*
*****************************************************************************/
#if defined(CONFIG_ARDUINO_ITHEAD_TFT) && defined(CONFIG_SPI_BITBANG) && \
defined(CONFIG_MMCSD_SPI)
int sam_sdinitialize(int minor);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __CONFIGS_ARDUINO_DUE_SRC_ARDUNO_DUE_H */

266
configs/arduino-due/src/sam_mmcsd.c Normal file
View File

@ -0,0 +1,266 @@
/****************************************************************************
* configs/sam3u-ek/src/up_mmcsd.c
*
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdbool.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/mmcsd.h>
#include <nuttx/spi/spi.h>
#include <nuttx/spi/spi_bitbang.h>
#include "up_arch.h"
#include "sam_gpio.h"
#include "chip/sam3u_pio.h"
#include "arduino-due.h"
/* In order to use the SD card on the ITEAD shield, you must enable the SPI bit-bang
* driver as well as support for SPI-based MMC/SD cards.
*/
#if defined(CONFIG_ARDUINO_ITHEAD_TFT) && defined(CONFIG_SPI_BITBANG) && \
defined(CONFIG_MMCSD_SPI)
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifdef CONFIG_DISABLE_MOUNTPOINT
# error Mountpoints are disabled (CONFIG_DISABLE_MOUNTPOINT=y)
#endif
/* Definitions for include/nuttx/spi/spi_bitbang.c. */
#define SPI_SETSCK putreg32(1 << 27, SAM_PIOB_SODR)
#define SPI_CLRSCK putreg32(1 << 27, SAM_PIOB_CODR)
#define SPI_SETMOSI putreg32(1 << 7, SAM_PIOD_SODR)
#define SPI_CLRMOSI putreg32(1 << 7, SAM_PIOD_CODR)
#define SPI_GETMISO ((getreg32(SAM_PIOD_PDSR) >> 8) & 1)
/* SPI_PERBIT_NSEC is the minimum time to transfer one bit. This determines
* the maximum frequency and is also used to calculate delays to achieve
* other SPI frequencies.
*
* This value came from selecting 400KHz and increasing SPI_PERBIT_NSEC
* until a frequency close to 400KHz was achieved. This is what was
* reported by the software: frequency=400000 holdtime=1 actual=298507.
* I measured a frequency of approximately 305KHz.
*
* NOTE that there are really only two frequencies possible: hold time=1
* (305KHz) and hold time = 0 (probably around 781KHz)
*/
#define SPI_PERBIT_NSEC 1350 /* Calibrated at 400KHz */
/* Misc definitions */
#define SAM34_MMCSDSLOTNO 0 /* There is only one slot */
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void spi_select(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid,
bool selected);
static uint8_t spi_status(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
static int spi_cmddata(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid,
bool cmd);
#endif
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Include the bit-band skeleton logic
****************************************************************************/
#include <nuttx/spi/spi_bitbang.c>
/****************************************************************************
* Name: sam_mmcsd_spiinitialize
*
* Description:
* Initialize the SPI bitband driver
*
* Input Parameters:
* None
*
* Returned Value:
* A non-NULL reference to the SPI driver on success
*
****************************************************************************/
static void spi_select(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid,
bool selected)
{
# warning Still need CS GPIO pin
}
/****************************************************************************
* Name: sam_mmcsd_spiinitialize
*
* Description:
* Initialize the SPI bitband driver
*
* Input Parameters:
* None
*
* Returned Value:
* A non-NULL reference to the SPI driver on success
*
****************************************************************************/
static uint8_t spi_status(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid)
{
if (devid = SPIDEV_MMCSD)
{
return SPI_STATUS_PRESENT;
}
return 0;
}
/****************************************************************************
* Name: spi_cmddata
*
* Description:
* If there were was a CMD/DATA line, this function would manage it
*
* Input Parameters:
* priv - An instance of the bit-bang driver structure
* devid - The device to use
* cmd - True=MCD false=DATA
*
* Returned Value:
* OK
*
****************************************************************************/
#ifdef CONFIG_SPI_CMDDATA
static int spi_cmddata(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid,
bool cmd)
{
return OK;
}
#endif
/****************************************************************************
* Name: sam_mmcsd_spiinitialize
*
* Description:
* Initialize the SPI bitband driver
*
* Input Parameters:
* None
*
* Returned Value:
* A non-NULL reference to the SPI driver on success
*
****************************************************************************/
static FAR struct spi_dev_s *sam_mmcsd_spiinitialize(void)
{
/* Initialize GPIOs */
sam_configgpio(GPIO_SD_SCK);
sam_configgpio(GPIO_SD_MISO);
sam_configgpio(GPIO_SD_MOSI);
// sam_configgpio(GPIO_SD_CS);
# warning Still need CS GPIO pin
/* Create the SPI driver instance */
return spi_create_bitbang(&g_spiops);
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sam_sdinitialize
*
* Description:
* Initialize the SPI-based SD card.
*
*****************************************************************************/
int sam_sdinitialize(int minor)
{
FAR struct spi_dev_s *spi;
int ret;
/* Get the SPI driver instance for the SD chip select */
fvdbg("Initializing bit bang SPI for the MMC/SD slot\n");
spi = sam_mmcsd_spiinitialize();
if (!spi)
{
fdbg("Failed to bit bang SPI for the MMC/SD slot\n");
return -ENODEV;
}
fvdbg("Successfully initialized bit bang SPI for the MMC/SD slot\n");
/* Bind the SPI device for the chip select to the slot */
fvdbg("Binding bit bang SPI device to MMC/SD slot %d\n",
SAM34_MMCSDSLOTNO);
ret = mmcsd_spislotinitialize(minor, SAM34_MMCSDSLOTNO, spi);
if (ret < 0)
{
fdbg("Failed to bind bit bang SPI device to MMC/SD slot %d: %d\n",
SAM34_MMCSDSLOTNO, ret);
return ret;
}
fvdbg("Successfuly bound bit bang SPI device to MMC/SD slot %d\n",
SAM34_MMCSDSLOTNO);
return OK;
}
#endif /* CONFIG_ARDUINO_ITHEAD_TFT && CONFIG_SPI_BITBANG && CONFIG_MMC_SPI */

115
configs/arduino-due/src/sam_nsh.c Normal file
View File

@ -0,0 +1,115 @@
/****************************************************************************
* config/arduino-due/src/sam_nsh.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdio.h>
#include <debug.h>
#include "arduino-due.h"
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
#if defined(CONFIG_ARDUINO_ITHEAD_TFT) && defined(CONFIG_SPI_BITBANG) && \
defined(CONFIG_MMCSD_SPI)
/* Support for the SD card slot on the ITEAD TFT shield */
/* Verify NSH PORT and SLOT settings */
# define SAM34_MMCSDSLOTNO 0 /* There is only one slot */
# if defined(CONFIG_NSH_MMCSDSLOTNO) && CONFIG_NSH_MMCSDSLOTNO != SAM34_MMCSDSLOTNO
# error Only one MMC/SD slot: Slot 0 (CONFIG_NSH_MMCSDSLOTNO)
# endif
/* Default MMC/SD minor number */
# ifndef CONFIG_NSH_MMCSDMINOR
# define CONFIG_NSH_MMCSDMINOR 0
# endif
#endif
/* Debug ********************************************************************/
#ifdef CONFIG_CPP_HAVE_VARARGS
# ifdef CONFIG_DEBUG
# define message(...) lowsyslog(__VA_ARGS__)
# else
# define message(...) printf(__VA_ARGS__)
# endif
#else
# ifdef CONFIG_DEBUG
# define message lowsyslog
# else
# define message printf
# endif
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: nsh_archinitialize
*
* Description:
* Perform architecture specific initialization
*
****************************************************************************/
int nsh_archinitialize(void)
{
#if defined(CONFIG_ARDUINO_ITHEAD_TFT) && defined(CONFIG_SPI_BITBANG) && \
defined(CONFIG_MMCSD_SPI)
/* Initialize the SPI-based MMC/SD slot */
{
int ret = sam_sdinitialize(CONFIG_NSH_MMCSDMINOR);
if (ret < 0)
{
message("nsh_archinitialize: Failed to initialize MMC/SD slot: %d\n",
ret);
return ret;
}
}
#endif
return OK;
}

4
configs/sam4l-xplained/src/sam_nsh.c
View File

@ -1,7 +1,7 @@
/****************************************************************************
* config/shenzhou/src/sam_nsh.c
* config/sam4l-xplained/src/sam_nsh.c
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without

52
drivers/spi/Make.defs Normal file
View File

@ -0,0 +1,52 @@
############################################################################
# drivers/spi/Make.defs
#
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <gnutt@nuttx.org>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# Don't build anything if there is no SPI support
ifeq ($(CONFIG_SPI),y)
# Include the selected SPI drivers
ifeq ($(CONFIG_SPI_BITBANG),y)
CSRCS += spi_bitbang.c
endif
# Include SPI device driver build support
DEPPATH += --dep-path spi
VPATH += :spi
CFLAGS += ${shell $(INCDIR) $(INCDIROPT) "$(CC)" $(TOPDIR)$(DELIM)drivers$(DELIM)spi}
endif

88
drivers/spi/spi_bitbang.c
View File

@ -42,6 +42,7 @@
#include <semaphore.h>
#include <assert.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/spi/spi.h>
#include <nuttx/spi/spi_bitbang.h>
@ -123,17 +124,17 @@ static uint16_t spi_send(FAR struct spi_dev_s *dev, uint16_t ch);
static void spi_exchange(FAR struct spi_dev_s *dev,
FAR const void *txbuffer, FAR void *rxbuffer,
size_t nwords);
static uint8_t spi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
static int spi_cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool cmd);
#endif
#ifndef CONFIG_SPI_EXCHANGE
static void spi_sndblock(FAR struct spi_dev_s *dev,
FAR const void *buffer, size_t nwords);
static void spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer,
size_t nwords);
#endif
static uint8_t spi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
static int spi_cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool cmd);
#endif
/****************************************************************************
* Private Data
@ -259,22 +260,12 @@ static void spi_select(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev, uint32_t frequency)
{
FAR struct spi_bitbang_s *priv = (FAR struct spi_bitbang_s *)dev;
uint32_t actual;
/* SPI frequency cannot be precisely controlled with a bit-bang interface.
* Freqency corresponds to delay in toggle the SPI clock line: Set high,
* wait, set low, wait, set high, wait, etc.
*
* Here we calcalute the half period of the frequency in nanoseconds (i.e.,
* the amount of time that the clock should remain in the high or low state).
*
* frequency = psec / 1 sec - psec = full period in seconds
* psec = 1 sec / frequency
* hpsec = 1 sec / (2 * frequency) - hpsec = half period in seconds
* hpnsec = 1000000000 / (2 * frequency) - hpnsec = half period in nanoseconds
*/
priv->hpnsec = (1000000000ul + frequency) / (frequency << 2);
return frequency;
DEBUGASSERT(priv && priv->low->setfrequency);
actual = priv->low->setfrequency(priv, frequency);
spivdbg("frequency=%d holdtime=%d actual=%d\n",
frequency, priv->holdtime, actual);
}
/****************************************************************************
@ -297,6 +288,7 @@ static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode)
FAR struct spi_bitbang_s *priv = (FAR struct spi_bitbang_s *)dev;
DEBUGASSERT(priv && priv->low->setmode);
priv->low->setmode(priv, mode);
spivdbg("mode=%d exchange=%p\n", mode, priv->exchange);
}
/****************************************************************************
@ -327,6 +319,7 @@ static void spi_setbits(FAR struct spi_dev_s *dev, int nbits)
DEBUGASSERT(nbits == 8);
#endif
}
/****************************************************************************
* Name: spi_send
*
@ -382,6 +375,7 @@ static void spi_exchange(FAR struct spi_dev_s *dev,
uint16_t dataout;
uint16_t datain;
spivdbg("txbuffer=%p rxbuffer=%p nwords=%d\n", txbuffer, rxbuffer, nwords);
DEBUGASSERT(priv && priv->low && priv->low->exchange);
/* If there is no data source, send 0xff */
@ -496,6 +490,56 @@ static void spi_recvblock(FAR struct spi_dev_s *dev, FAR void *buffer, size_t nw
}
#endif
/****************************************************************************
* Name: spi_status
*
* Description:
* Get status bits associated with the device associated with 'devid'
*
* Input Parameters:
* dev - Device-specific state data
* devid - Identifies the device of interest
*
* Returned Value:
* Bit encoded status byte
*
****************************************************************************/
static uint8_t spi_status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
{
FAR struct spi_bitbang_s *priv = (FAR struct spi_bitbang_s *)dev;
DEBUGASSERT(priv && priv->low && priv->low->status);
return priv->low->status(priv, devid);
}
/****************************************************************************
* Name: spi_cmddata
*
* Description:
* Control the SPI CMD/DATA like for the device associated with 'devid'
*
* Input Parameters:
* dev - Device-specific state data
* devid - Identifies the device of interest
* cmd - True:CMD False:DATA
*
* Returned Value:
* OK on success; a negated errno value on failure
*
****************************************************************************/
#ifdef CONFIG_SPI_CMDDATA
static int spi_cmddata(FAR struct spi_dev_s *dev, enum spi_dev_e devid,
bool cmd)
{
FAR struct spi_bitbang_s *priv = (FAR struct spi_bitbang_s *)dev;
DEBUGASSERTcmddata(priv && priv->low && priv->low->status);
return priv->low->cmddata(priv, devid, cmd);
}
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
@ -531,10 +575,12 @@ FAR struct spi_dev_s *spi_create_bitbang(FAR const struct spi_bitbang_ops_s *low
priv->nbits = 8;
#endif
sem_init(&priv->exclsem, 0, 1);
/* Select an initial state of mode 0, 8-bits, and 400KHz */
low->setmode(priv, SPIDEV_MODE0);
spi_setfrequency(&priv->dev, 400000);
low->setfrequency(priv, 400000);
/* And return the initialized driver structure */

552
include/nuttx/spi/spi_bitbang.c Executable file
View File

@ -0,0 +1,552 @@
/****************************************************************************
* configs/nuttx/spi/spi_bitbang.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/spi/spi_bitbang.h>
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Usage ********************************************************************/
/* To use this logic, you should provide a C file that does the following:
*
* - Defines SPI_SETSCK and SPI_CLRSCK to set and clear the SCK signal
* - Defines SPI_SETMOSI and SPI_CLRMOSI to set and clear the MISO signal
* - Defines SPI_GETMISO to sample the MISO state
* - Defines SPI_PERBIT_NSEC which is the minimum time to transfer one bit.
* This determines the maximum frequency.
* - Provide implementations of spi_select(), spi_status(), and spi_cmddata().
* - Then include this file
* - Provide an initialization function that initializes the GPIO pins used
* in the bit bang interface and calls spi_create_bitbang().
*/
/* Debug ********************************************************************/
/* Check if SPI debut is enabled (non-standard.. no support in
* include/debug.h
*/
#ifndef CONFIG_DEBUG
# undef CONFIG_DEBUG_VERBOSE
# undef CONFIG_DEBUG_SPI
#endif
#ifdef CONFIG_DEBUG_SPI
# define spidbg lldbg
# ifdef CONFIG_DEBUG_VERBOSE
# define spivdbg lldbg
# else
# define spivdbg(x...)
# endif
#else
# define spidbg(x...)
# define spivdbg(x...)
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
static void spi_select(FAR struct spi_bitbang_s *priv,
enum spi_dev_e devid, bool selected);
static uint32_t spi_setfrequency(FAR struct spi_bitbang_s *priv,
uint32_t frequency);
static void spi_setmode(FAR struct spi_bitbang_s *priv,
enum spi_mode_e mode);
static uint16_t spi_bitexchange0(FAR struct spi_bitbang_s *priv,
uint16_t dataout);
static uint16_t spi_bitexchange1(FAR struct spi_bitbang_s *priv,
uint16_t dataout);
static uint16_t spi_bitexchange2(FAR struct spi_bitbang_s *priv,
uint16_t dataout);
static uint16_t spi_bitexchange3(FAR struct spi_bitbang_s *priv,
uint16_t dataout);
static uint16_t spi_exchange(FAR struct spi_bitbang_s *priv,
uint16_t dataout);
static uint8_t spi_status(FAR struct spi_bitbang_s *priv,
enum spi_dev_e devid);
#ifdef CONFIG_SPI_CMDDATA
static int spi_cmddata(FAR struct spi_bitbang_s *priv,
enum spi_dev_e devid, bool cmd);
#endif
/****************************************************************************
* Private Data
****************************************************************************/
static const struct spi_bitbang_ops_s g_spiops =
{
spi_select, /* select */
spi_setfrequency, /* setfrequency */
spi_setmode, /* setmode */
spi_exchange, /* exchange */
spi_status, /* status */
#ifdef CONFIG_SPI_CMDDATA
spi_cmddata, /* cmddata */
#endif
};
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: spi_setfrequency
*
* Description:
* Set the SPI frequency.
*
* Input Parameters:
* dev - Device-specific state data
* frequency - The SPI frequency requested
*
* Returned Value:
* Returns the actual frequency selected
*
****************************************************************************/
static uint32_t spi_setfrequency(FAR struct spi_bitbang_s *priv, uint32_t frequency)
{
uint32_t pnsec;
/* SPI frequency cannot be precisely controlled with a bit-bang interface.
* Freqency corresponds to delay in toggle the SPI clock line: Set high,
* wait, set low, wait, set high, wait, etc.
*
* Here we calcalute the half period of the frequency in nanoseconds (i.e.,
* the amount of time that the clock should remain in the high or low state).
*
* frequency = psec / 1 sec psec = full period in seconds
* psec = 1 sec / frequency
* pnsec = 1000000000 nsec / (2 * frequency) pnsec = full period in nsec
*
* As examples:
* 1) frequency = 400KHz; SPI_PERBIT_NSEC = 100
* pnsec = 2500 - 100 = 2400
* holdtime = ((2401) >> 1) + 500) / 1000 = 1
* 2) frequency = 20MHz; SPI_PERBIT_NSEC = 100
* pnsec = 50 - 100 -> 0
* holdtime = ((0) >> 1) + 500) / 1000 = 0
*/
pnsec = (1000000000ul + (frequency >> 1)) / frequency;
/* Minus the bit transfer overhead */
if (pnsec > SPI_PERBIT_NSEC)
{
pnsec -= SPI_PERBIT_NSEC;
}
else
{
pnsec = 0;
}
/* The hold time in microseconds is half of this (in microseconds) */
priv->holdtime = (((pnsec + 1) >> 1) + 500) / 1000;
/* Let's do our best to calculate the actual frequency
*
* As examples:
* 1) frequency = 400KHz; SPI_PERBIT_NSEC = 100; holdtime = 1
* pnsec = 2000 * 1 + 100 = 2100
* frequency = 476KHz
* 2) frequency = 20MHz; SPI_PERBIT_NSEC = 100; holdtime = 0
* pnsec = 2000 * 0 + 100 = 100
* frequency = 10MHz
*/
pnsec = 2000 * priv->holdtime + SPI_PERBIT_NSEC;
frequency = 1000000000ul / pnsec;
return frequency;
}
/****************************************************************************
* Name: spi_setmode
*
* Description:
* Select the current SPI mode
*
* Input Parameters:
* dev - Device-specific state data
* mode - the new SPI mode
*
* Returned Value:
* None
*
****************************************************************************/
static void spi_setmode(FAR struct spi_bitbang_s *priv,
enum spi_mode_e mode)
{
spivdbg("mode=%d\n", mode);
switch (mode)
{
case SPIDEV_MODE0: /* CPOL=0; CPHA=0 */
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE0
SPI_CLRSCK; /* Resting level of the clock is low */
priv->exchange = spi_bitexchange0;
#else
DEBUGPANIC();
#endif
break;
case SPIDEV_MODE1: /* CPOL=0; CPHA=1 */
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE1
SPI_CLRSCK; /* Resting level of the clock is low */
priv->exchange = spi_bitexchange1;
#else
DEBUGPANIC();
#endif
break;
case SPIDEV_MODE2: /* CPOL=1; CPHA=0 */
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE2
SPI_SETSCK; /* Resting level of the clock is high */
priv->exchange = spi_bitexchange2;
#else
DEBUGPANIC();
#endif
break;
case SPIDEV_MODE3: /* CPOL=1; CPHA=1 */
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE3
SPI_SETSCK; /* Resting level of the clock is high */
priv->exchange = spi_bitexchange3;
#else
DEBUGPANIC();
#endif
break;
default:
DEBUGPANIC();
break;
}
}
/****************************************************************************
* Name: spi_bitexchange0
*
* Description:
* Exchange one bit in mode 0
*
* Input Parameters:
* dev - Device-specific state data
* lock - true: Lock spi bus, false: unlock SPI bus
*
* Returned Value:
* None
*
****************************************************************************/
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE0
static uint16_t spi_bitexchange0(FAR struct spi_bitbang_s *priv,
uint16_t dataout)
{
uint16_t datain;
/* No clock transition before setting MOSI */
if (dataout != 0)
{
SPI_SETMOSI; /* Set MISO if the bit is set */
}
else
{
SPI_CLRMOSI; /* Clear MISO if the bit is not set */
}
SPI_SETSCK; /* Clock transition before getting MISO */
datain = (uint16_t)SPI_GETMISO; /* Get bit 0 = MOSI value */
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
SPI_CLRSCK; /* Return clock to the resting state after getting MISO */
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
return datain;
}
#endif
/****************************************************************************
* Name: spi_bitexchange1
*
* Description:
* Exchange one bit in mode 1
*
* Input Parameters:
* dev - Device-specific state data
* lock - true: Lock spi bus, false: unlock SPI bus
*
* Returned Value:
* None
*
****************************************************************************/
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE1
static uint16_t spi_bitexchange1(FAR struct spi_bitbang_s *priv,
uint16_t dataout)
{
uint16_t datain;
SPI_SETSCK; /* Clock transition before setting MOSI */
if (dataout != 0)
{
SPI_SETMOSI; /* Set MISO if the bit is set */
}
else
{
SPI_CLRMOSI; /* Clear MISO if the bit is not set */
}
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
SPI_CLRSCK; /* Clock transition before getting MISO */
datain = (uint16_t)SPI_GETMISO; /* Get bit 0 = MOSI value */
/* Clock is in resting state after getting MISO */
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
return datain;
}
#endif
/****************************************************************************
* Name: spi_bitexchange2
*
* Description:
* Exchange one bit in mode 2
*
* Input Parameters:
* dev - Device-specific state data
* lock - true: Lock spi bus, false: unlock SPI bus
*
* Returned Value:
* None
*
****************************************************************************/
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE2
static uint16_t spi_bitexchange2(FAR struct spi_bitbang_s *priv,
uint16_t dataout)
{
uint16_t datain;
/* No clock transition before setting MOSI */
if (dataout != 0)
{
SPI_SETMOSI; /* Set MISO if the bit is set */
}
else
{
SPI_CLRMOSI; /* Clear MISO if the bit is not set */
}
SPI_CLRSCK; /* Clock transition before getting MISO */
datain = (uint16_t)SPI_GETMISO; /* Get bit 0 = MOSI value */
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
SPI_SETSCK; /* Return clock to the resting state after getting MISO */
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
return datain;
}
#endif
/****************************************************************************
* Name: spi_bitexchange3
*
* Description:
* Exchange one bit in mode 3
*
* Input Parameters:
* dev - Device-specific state data
* lock - true: Lock spi bus, false: unlock SPI bus
*
* Returned Value:
* None
*
****************************************************************************/
#ifndef CONFIG_SPI_BITBANG_DISABLEMODE3
static uint16_t spi_bitexchange3(FAR struct spi_bitbang_s *priv,
uint16_t dataout)
{
uint16_t datain;
SPI_CLRSCK; /* Clock transition before setting MOSI */
if (dataout != 0)
{
SPI_SETMOSI; /* Set MISO if the bit is set */
}
else
{
SPI_CLRMOSI; /* Clear MISO if the bit is not set */
}
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
SPI_SETSCK; /* Clock transition before getting MISO */
datain = (uint16_t)SPI_GETMISO; /* Get bit 0 = MOSI value */
/* Clock is in resting state after getting MISO */
if (priv->holdtime)
{
up_udelay(priv->holdtime);
}
return datain;
}
#endif
/****************************************************************************
* Name: spi_exchange
*
* Description:
* Exahange on word of data on SPI
*
* Input Parameters:
* priv - Device-specific state data
* data - The TX data to be exchanged with the slave
*
* Returned Value:
* The RX data received from the slave
*
****************************************************************************/
#ifdef CONFIG_SPI_BITBANG_VARWIDTH
static uint16_t spi_exchange(FAR struct spi_bitbang_s *priv, uint16_t dataout)
{
uint16_t datain;
uint16_t bit;
int shift;
/* Transfer each bit. This might be better done with straight-line
* logic because the loop overhead will limit our maximum transfer
* rate.
*/
shift = priv->nbits - 1
for (bit = 1 << shift; bit != 0; bit >>= 1)
{
/* Shift to make space for the next, less significant bit.
* Then exchange bits with the slave an OR in the new, returned
* bit.
*/
datain <<= 1;
datain |= priv->exchange(priv, dataout & bit);
}
return datain;
}
#else
static uint16_t spi_exchange(FAR struct spi_bitbang_s *priv, uint16_t dataout)
{
uint8_t datain;
/* Transfer each bit. This is better done with straight-line logic
* when possible because the loop overhead will limit our maximum transfer
* rate.
*/
/* Exchange bit 7 with the slave */
datain = priv->exchange(priv, dataout & (1 << 7));
/* Exchange bit 6 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 6));
/* Exchange bit 5 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 5));
/* Exchange bit 4 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 4));
/* Exchange bit 3 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 3));
/* Exchange bit 2 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 2));
/* Exchange bit 1 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 1));
/* Exchange bit 0 with the slave */
datain <<= 1;
datain |= priv->exchange(priv, dataout & (1 << 0));
return datain;
}
#endif

24
include/nuttx/spi/spi_bitbang.h
View File

@ -42,6 +42,8 @@
#include <nuttx/config.h>
#include <semaphore.h>
#include <nuttx/spi/spi.h>
#ifdef CONFIG_SPI_BITBANG
@ -49,15 +51,6 @@
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Configuration ************************************************************/
#ifndef SPI_BITBANG_MODE <<< NOOOO.. Needs to be programmable
# define SPI_BITBANG_MODE SPI_MODE0
#endif
#ifndef CONFIG_SPI_BITBANG_FREQUENCY <<< NOOOO.. Needs to be programmable
# define CONFIG_SPI_BITBANG_FREQUENCY 1000000
#endif
/* Debug ********************************************************************/
/* Check if SPI debut is enabled (non-standard.. no support in
* include/debug.h
@ -97,6 +90,11 @@ struct spi_bitbang_ops_s
void (*select)(FAR struct spi_bitbang_s *priv, enum spi_dev_e devid,
bool selected);
/* Platform-specific, SPI frequency function */
uint32_t (*setfrequency)(FAR struct spi_bitbang_s *priv,
uint32_t frequency);
/* Platform-specific, SPI mode function */
void (*setmode)(FAR struct spi_bitbang_s *priv, enum spi_mode_e mode);
@ -117,20 +115,24 @@ struct spi_bitbang_ops_s
#endif
};
/* This is the type of the function that can exchange one bit */
typedef uint8_t (*bitexchange_t)(FAR struct spi_bitbang_s *priv, uint8_t dataout);
/* This structure provides the state of the SPI bit-bang driver */
struct spi_bitbang_s
{
struct spi_dev_s dev; /* Publicly visible version of SPI driver */
FAR const struct spi_bitbang_ops_s *low; /* Low-level operations */
uint32_t hpnsec; /* Number of microseconds in a half cycle */
uint32_t holdtime; /* SCK hold time to achieve requested frequency */
bitexchange_t exchange; /* The select bit exchange function */
#ifndef CONFIG_SPI_OWNBUS
sem_t exclsem; /* Supports mutually exclusive access to SPI */
#endif
#ifdef CONFIG_SPI_BITBANG_VARWIDTH
uint8_t nbits; /* Number of bits in the transfer */
#endif
FAR void *priv; /* For use by the lower half driver */
};
/****************************************************************************