STM32 Ethernet bugfixes; STM3240G-EVAL DHCPD configuration; fixes for IP address order bugs in DHCPD

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4168 42af7a65-404d-4744-a932-0658087f49c3

configs/lpcxpresso-lpc1768/README.txt

@@ -729,10 +729,10 @@ Where <subdir> is one of the following:
     Support for the board's SPI-based MicroSD card is included
     (but not passing tests as of this writing).
 
-	NOTE: At present, the value for the SD SPI frequency is too
+    NOTE: At present, the value for the SD SPI frequency is too
-	high and the SD will fail.  Setting that frequency to 400000
+    high and the SD will fail.  Setting that frequency to 400000
-	removes the problem. TODO:  Tune this frequency to some optimal
+    removes the problem. TODO:  Tune this frequency to some optimal
-	value.
+    value.
 
     Jumpers: J55 must be set to provide chip select PIO1_11 signal as
     the SD slot chip select.

configs/stm3240g-eval/README.txt

@@ -430,6 +430,17 @@ can be selected as follow:
 
 Where <subdir> is one of the following:
 
+  dhcpd:
+  -----
+
+    This builds the DCHP server using the apps/examples/dhcpd application
+    (for execution from FLASH.) See apps/examples/README.txt for information
+    about the dhcpd example.  The server address is 10.0.0.1 and it serves
+    IP addresses in the range 10.0.0.2 through 10.0.0.17 (all of which, of
+    course, are configurable).
+
+    CONFIG_STM32_CODESOURCERYW=y  : CodeSourcery under Windows
+
   ostest:
   ------
     This configuration directory, performs a simple OS test using

configs/stm3240g-eval/dhcpd/Make.defs

@@ -0,0 +1,170 @@
+############################################################################
+# configs/stm3240g-eval/dhcpd/Make.defs
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_STM32_CODESOURCERYW),y)
+  # CodeSourcery under Windows
+  CROSSDEV = arm-none-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_STM32_CODESOURCERYL),y)
+  # CodeSourcery under Linux
+  CROSSDEV = arm-none-eabi-
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+  MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_STM32_DEVKITARM),y)
+  # devkitARM under Windows
+  CROSSDEV = arm-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_STM32_RAISONANCE),y)
+  # Raisonance RIDE7 under Windows
+  CROSSDEV = arm-none-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_STM32_BUILDROOT),y)
+  # NuttX buildroot under Linux or Cygwin
+  CROSSDEV = arm-elf-
+  ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+  MAXOPTIMIZATION = -Os
+endif
+
+LDSCRIPT = ld.script
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/dhcpd/$(LDSCRIPT)
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+

configs/stm3240g-eval/dhcpd/appconfig

@@ -0,0 +1,43 @@
+############################################################################
+# configs/stm3240g-eval/dhcpd/appconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/dhcpd
+
+# Networking support
+
+CONFIGURED_APPS += netutils/dhcpd
+CONFIGURED_APPS += netutils/uiplib

configs/stm3240g-eval/dhcpd/ld.script

@@ -0,0 +1,116 @@
+/****************************************************************************
+ * configs/stm3240g-eval/dhcpd/ld.script
+ *
+ *   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <gnutt@nuttx.org>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The STM32F103ZET6 has 1024Kb of FLASH beginning at address 0x0800:0000 and
+ * 192Kb of SRAM. SRAM is split up into three blocks:
+ *
+ * 1) 112Kb of SRAM beginning at address 0x2000:0000
+ * 2)  16Kb of SRAM beginning at address 0x2001:c000
+ * 3)  64Kb of TCM SRAM beginning at address 0x1000:0000
+ *
+ * When booting from FLASH, FLASH memory is aliased to address 0x0000:0000
+ * where the code expects to begin execution by jumping to the entry point in
+ * the 0x0800:0000 address
+ * range.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x08000000, LENGTH = 1024K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 112K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	__exidx_start = ABSOLUTE(.);
+	.ARM.exidx : {
+		*(.ARM.exidx*)
+	} > flash
+	__exidx_end = ABSOLUTE(.);
+
+	_eronly = ABSOLUTE(.);
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} >sram
+
+	.bss : {
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+
+	/* Stabs debugging sections. */
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}

configs/stm3240g-eval/dhcpd/setenv.sh

@@ -0,0 +1,67 @@
+#!/bin/bash
+# configs/stm3240g-eval/dhcpd/setenv.sh
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <gnutt@nuttx.org>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$_" = "$0" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+WD=`pwd`
+if [ ! -x "setenv.sh" ]; then
+  echo "This script must be executed from the top-level NuttX build directory"
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then
+  export PATH_ORIG="${PATH}"
+fi
+
+# This the Cygwin path to the location where I installed the RIDE
+# toolchain under windows.  You will also have to edit this if you install
+# the RIDE toolchain in any other location
+#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Raisonance/Ride/arm-gcc/bin"
+
+# This the Cygwin path to the location where I installed the CodeSourcery
+# toolchain under windows.  You will also have to edit this if you install
+# the CodeSourcery toolchain in any other location
+export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
+
+# This the Cygwin path to the location where I build the buildroot
+# toolchain.
+#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
+
+# Add the path to the toolchain to the PATH varialble
+export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"

configs/stm3240g-eval/nsh/defconfig

@@ -535,6 +535,14 @@ CONFIG_ARCH_BZERO=n
 # CONFIG_NAME_MAX - The maximum size of a file name.
 # CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
 #   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
+#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
+#   to force automatic, line-oriented flushing the output buffer
+#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
+#   fprintf(), and vfprintf().  When a newline is encountered in
+#   the output string, the output buffer will be flushed.  This
+#   (slightly) increases the NuttX footprint but supports the kind
+#   of behavior that people expect for printf().
 # CONFIG_NUNGET_CHARS - Number of characters that can be
 #   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
 # CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
@@ -560,6 +568,7 @@ CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
 CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=y
 CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32
@@ -725,6 +734,9 @@ CONFIG_NET_SOCKOPTS=y
 CONFIG_NET_BUFSIZE=562
 CONFIG_NET_TCP=y
 CONFIG_NET_TCP_CONNS=40
+#CONFIG_NET_TCP_READAHEAD_BUFSIZE
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=y
 CONFIG_NET_MAX_LISTENPORTS=40
 CONFIG_NET_UDP=y
 CONFIG_NET_UDP_CHECKSUMS=y
@@ -1026,6 +1038,9 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
 #
 # Settings for apps/nshlib
 #
+# CONFIG_NSH_BUILTIN_APPS - Support external registered,
+#   "named" applications that can be executed from the NSH
+#   command line (see apps/README.txt for more information).
 # CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
 # CONFIG_NSH_STRERROR - Use strerror(errno)
 # CONFIG_NSH_LINELEN - Maximum length of one command line
@@ -1057,6 +1072,7 @@ CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
 # CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
 # CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
 #
+CONFIG_NSH_BUILTIN_APPS=n
 CONFIG_NSH_FILEIOSIZE=512
 CONFIG_NSH_STRERROR=n
 CONFIG_NSH_LINELEN=64

configs/stm3240g-eval/ostest/defconfig

@@ -526,6 +526,14 @@ CONFIG_ARCH_BZERO=n
 # CONFIG_NAME_MAX - The maximum size of a file name.
 # CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
 #   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_STDIO_LINEBUFFER - If standard C buffered I/O is enabled
+#   (CONFIG_STDIO_BUFFER_SIZE > 0), then this option may be added
+#   to force automatic, line-oriented flushing the output buffer
+#   for putc(), fputc(), putchar(), puts(), fputs(), printf(),
+#   fprintf(), and vfprintf().  When a newline is encountered in
+#   the output string, the output buffer will be flushed.  This
+#   (slightly) increases the NuttX footprint but supports the kind
+#   of behavior that people expect for printf().
 # CONFIG_NUNGET_CHARS - Number of characters that can be
 #   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
 # CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
@@ -551,6 +559,7 @@ CONFIG_NFILE_DESCRIPTORS=8
 CONFIG_NFILE_STREAMS=8
 CONFIG_NAME_MAX=32
 CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_STDIO_LINEBUFFER=n
 CONFIG_NUNGET_CHARS=2
 CONFIG_PREALLOC_MQ_MSGS=4
 CONFIG_MQ_MAXMSGSIZE=32