sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

A few native window build updates

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@5387 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-11-25 20:58:39 +00:00
parent 2ecbe6d360
commit e277228f4f
4 changed files with 67 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

18
configs/ez80f910200kitg/README.txt
View File

@ -107,8 +107,20 @@ available:
CONFIG_APPS_DIR="..\apps"
NOTE: If you need to change the toolchain path used in Make.defs,
you will need to use the short 8.3 filenames to avoid spaces. On
my change C:\PROGRA~1\ is C:\PROGRA~2\ is C:\Program Files (x86)\
NOTES:
a. If you need to change the toolchain path used in Make.defs, you
will need to use the short 8.3 filenames to avoid spaces. On my
PC, C:\PROGRA~1\ is is C:\Program Files\ and C:\PROGRA~2\ is
C:\Program Files (x86)\
b. You can't use setenv.sh in the native Windows environment. Try
scripts/setenv.bat instead.
c. At present, the native Windows build fails at the final link stages.
The failure is due to problems in arch/z80/src/nuttx/linkcmd that
is autogenerated by arch/z80/src/Makefile.zdsii. The basic program
is the spurious spaces and and carrirage returns are generated at
the end of the lines after a line continuation (\ ^M). If these
trailing bad characters are manually eliminated, then the build
will succeed on the next try.
Check out any README.txt files in these <sub-directory>s.

3
configs/ez80f910200kitg/ostest/defconfig
View File

@ -232,11 +232,10 @@ CONFIG_MMCSD_SDIO=y
# CONFIG_SENSORS is not set
# CONFIG_SERCOMM_CONSOLE is not set
CONFIG_SERIAL=y
# CONFIG_LOWLEVEL_CONSOLE is not set
CONFIG_LOWLEVEL_CONSOLE=y
# CONFIG_16550_UART is not set
CONFIG_ARCH_HAVE_UART0=y
CONFIG_MCU_SERIAL=y
CONFIG_STANDARD_SERIAL=y
CONFIG_UART0_SERIAL_CONSOLE=y
# CONFIG_NO_SERIAL_CONSOLE is not set

50
configs/ez80f910200kitg/scripts/setenv.bat Normal file
View File

@ -0,0 +1,50 @@
@echo off
rem configs/ez80f810200kitg/scripts/setenv.bat
rem
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
rem Author: Gregory Nutt <gnutt@nuttx.org>
rem
rem Redistribution and use in source and binary forms, with or without
rem modification, are permitted provided that the following conditions
rem are met:
rem
rem 1. Redistributions of source code must retain the above copyright
rem notice, this list of conditions and the following disclaimer.
rem 2. Redistributions in binary form must reproduce the above copyright
rem notice, this list of conditions and the following disclaimer in
rem the documentation and/or other materials provided with the
rem distribution.
rem 3. Neither the name NuttX nor the names of its contributors may be
rem used to endorse or promote products derived from this software
rem without specific prior written permission.
rem
rem THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
rem "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
rem LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
rem FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
rem COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
rem INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
rem BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
rem OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
rem AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
rem LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
rem ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
rem POSSIBILITY OF SUCH DAMAGE.
rem This is the location where I installed in the MinGW compiler. With
rem this configuration, it is recommended that you do NOT install the
rem MSYS tools; they conflict with the GNUWin32 tools. See
rem http://www.mingw.org/ for further info.
set PATH=C:\MinGW\bin;%PATH%
rem This is the location where I installed the ZDS-II toolchain.
set PATH=C:\Program Files (x86)\ZiLOG\ZDSII_eZ80Acclaim!_5.1.1\bin;%PATH%
rem This is the location where I installed the GNUWin32 tools. See
rem http://gnuwin32.sourceforge.net/.
set PATH=C:\gnuwin32\bin;%PATH%
echo %PATH%

2
configs/ez80f910200kitg/ostest/setenv.bat → configs/ez80f910200zco/scripts/setenv.bat
View File

@ -1,6 +1,6 @@
@echo off
rem configs/ez80f810200kitg/ostest/setenv.bat
rem configs/ez80f910200zco/scripts/setenv.bat
rem
rem Copyright (C) 2012 Gregory Nutt. All rights reserved.
rem Author: Gregory Nutt <gnutt@nuttx.org>