SAMA5D3x-EK: Add a new 'demo' configuration
This commit is contained in:
Gregory Nutt
parent
417f2006aa
commit
e30cb1d470
@ -5505,4 +5505,8 @@
|
||||
* net/net_monitor.c: Fixes a race condition where a loss of connection
|
||||
may not be detected when the connection is lost before it has been
|
||||
accepted (from Max Holtzberg) (2013-9-6).
|
||||
* configs/sama5d3x-ek/demo: Add a new NSH configuration. The
|
||||
original NSH configuration will be a simple platform for testing
|
||||
individual features; the demo configuration will be a more complex
|
||||
platform for demonstrating multiple interacting features (2013-9-6).
|
||||
|
||||
|
||||
@ -1981,7 +1981,7 @@ DMA_HANDLE sam_dmachannel(uint8_t dmacno, uint32_t chflags)
|
||||
else
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SAMA5_DMAC0
|
||||
#ifdef CONFIG_SAMA5_DMAC1
|
||||
if (dmacno == 1)
|
||||
{
|
||||
dmac = &g_dmac1;
|
||||
|
||||
@ -873,6 +873,122 @@ Configurations
|
||||
Configuration sub-directories
|
||||
-----------------------------
|
||||
|
||||
demo:
|
||||
This configuration directory provide the NuttShell (NSH). There are
|
||||
two NSH configurations: nsh and demo. The difference is that nsh is
|
||||
intended to be a very simple NSH configuration upon which you can build
|
||||
further functionality. The demo configuration, on the other hand, is
|
||||
intended to be a rich configuration that shows many features all working
|
||||
together.
|
||||
|
||||
NOTES:
|
||||
1. This configuration uses the default USART1 serial console. That
|
||||
is easily changed by reconfiguring to (1) enable a different
|
||||
serial peripheral, and (2) selecting that serial peripheral as
|
||||
the console device.
|
||||
|
||||
2. By default, this configuration is set up to build on Windows
|
||||
under either a Cygwin or MSYS environment using a recent, Windows-
|
||||
native, generic ARM EABI GCC toolchain (such as the CodeSourcery
|
||||
toolchain). Both the build environment and the toolchain
|
||||
selection can easily be changed by reconfiguring:
|
||||
|
||||
CONFIG_HOST_WINDOWS=y : Windows operating system
|
||||
CONFIG_WINDOWS_CYGWIN=y : POSIX environment under windows
|
||||
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y : CodeSourcery for Windows
|
||||
|
||||
3. This configuration executes out of CS0 NOR flash and can only
|
||||
be loaded via SAM-BA. These are the relevant configuration options
|
||||
the define the NOR FLASH configuration:
|
||||
|
||||
CONFIG_SAMA5_BOOT_CS0FLASH=y : Boot from FLASH on CS0
|
||||
CONFIG_BOOT_RUNFROMFLASH=y : Run in place on FLASH (vs copying to RAM)
|
||||
|
||||
CONFIG_SAMA5_EBICS0=y : Enable CS0 external memory
|
||||
CONFIG_SAMA5_EBICS0_SIZE=134217728 : Memory size is 128KB
|
||||
CONFIG_SAMA5_EBICS0_NOR=y : Memory type is NOR FLASH
|
||||
|
||||
CONFIG_FLASH_START=0x10000000 : Physical FLASH start address
|
||||
CONFIG_FLASH_VSTART=0x10000000 : Virtual FLASH start address
|
||||
CONFIG_FLASH_SIZE=134217728 : FLASH size (again)
|
||||
|
||||
CONFIG_RAM_START=0x00300400 : Data stored after page table
|
||||
CONFIG_RAM_VSTART=0x00300400
|
||||
CONFIG_RAM_SIZE=114688 : Available size of 128KB - 16KB for page table
|
||||
|
||||
NOTE: In order to boot in this configuration, you need to close the
|
||||
BMS jumper.
|
||||
|
||||
The following features are pre-enabled in the demo configuration, but not
|
||||
in the nsh configuration:
|
||||
|
||||
4. SDRAM is supported. .data and .bss is still retained in ISRAM, but
|
||||
SDRAM is intialized and the SDRAM memory is included in the heap.
|
||||
Relevant configuration settings:
|
||||
|
||||
System Type->ATSAMA5 Peripheral Support
|
||||
CONFIG_SAMA5_MPDDRC=y : Enable the DDR controller
|
||||
|
||||
System Type->External Memory Configuration
|
||||
CONFIG_SAMA5_DDRCS=y : Tell the system that DRAM is at the DDR CS
|
||||
CONFIG_SAMA5_DDRCS_SIZE=268435456 : 2Gb DRAM -> 256GB
|
||||
CONFIG_SAMA5_DDRCS_LPDDR2=y : Its DDR2
|
||||
CONFIG_SAMA5_MT47H128M16RT=y : This is the type of DDR2
|
||||
|
||||
System Type->Heap Configuration
|
||||
CONFIG_SAMA5_DDRCS_HEAP=y : Add the SDRAM to the heap
|
||||
|
||||
Memory Management
|
||||
CONFIG_MM_REGIONS=2 : Two heap memory regions: ISRAM and SDRAM
|
||||
|
||||
5. The Embest or Ronetix CPU module includes an Atmel AT25DF321A,
|
||||
32-megabit, 2.7-volt SPI serial flash. Support for that serial
|
||||
FLASH can is enabled in this configuration. These are the relevant
|
||||
configuration settings:
|
||||
|
||||
System Type -> SAMA5 Peripheral Support
|
||||
CONFIG_SAMA5_SPI0=y : Enable SPI0
|
||||
CONFIG_SAMA5_DMAC0=y : Enable DMA controller 0
|
||||
|
||||
System Type -> SPI device driver options
|
||||
CONFIG_SAMA5_SPI_DMA=y : Use DMA for SPI transfers
|
||||
CONFIG_SAMA5_SPI_DMATHRESHOLD=4 : Don't DMA for small transfers
|
||||
|
||||
Device Drivers -> SPI Driver Support
|
||||
CONFIG_SPI=y : Enable SPI support
|
||||
CONFIG_SPI_EXCHANGE=y : Support the exchange method
|
||||
|
||||
Device Drivers -> Memory Technology Device (MTD) Support
|
||||
CONFIG_MTD=y : Enable MTD support
|
||||
CONFIG_MTD_AT25=y : Enable the AT25 driver
|
||||
CONFIG_AT25_SPIMODE=0 : Use SPI mode 0
|
||||
CONFIG_AT25_SPIFREQUENCY=20000000 : Use SPI frequency 20MHz
|
||||
|
||||
Application Configuration -> NSH Library
|
||||
CONFIG_NSH_ARCHINIT=y : NSH board-initialization
|
||||
|
||||
Board Selection
|
||||
CONFIG_SAMA5_AT25_AUTOMOUNT=y : Mounts AT25 for NSH
|
||||
CONFIG_SAMA5_AT25_FTL=y : Create block driver for FAT
|
||||
|
||||
NOTE that you must close JP1 on the Embest/Ronetix board in
|
||||
order to enable the AT25 FLASH chip select.
|
||||
|
||||
You can then format the AT25 FLASH for a FAT file system and mount
|
||||
the file system at /mnt/sdcard using these NSH commands:
|
||||
|
||||
nsh> mkfatfs /dev/mtdblock0
|
||||
nsh> mount -t vfat /dev/mtdblock0 /mnt/sdcard
|
||||
|
||||
Then you an use the FLASH as a normal FAT file system:
|
||||
|
||||
nsh> echo "This is a test" >/mnt/sdcard/atest.txt
|
||||
nsh> ls -l /mnt/sdcard
|
||||
/mnt/sdcard:
|
||||
-rw-rw-rw- 16 atest.txt
|
||||
nsh> cat /mnt/sdcard/atest.txt
|
||||
This is a test
|
||||
|
||||
hello:
|
||||
This configuration directory, performs the (almost) simplest of all
|
||||
possible examples: examples/hello. This just comes up, says hello
|
||||
@ -933,7 +1049,12 @@ Configurations
|
||||
2013-7-31: Delay loop calibrated.
|
||||
|
||||
nsh:
|
||||
This configuration directory provide the NuttShell (NSH).
|
||||
This configuration directory provide the NuttShell (NSH). There are
|
||||
two NSH configurations: nsh and demo. The difference is that nsh is
|
||||
intended to be a very simple NSH configuration upon which you can build
|
||||
further functionality. The demo configuration, on the other hand, is
|
||||
intended to be a rich configuration that shows many features all working
|
||||
together.
|
||||
|
||||
NOTES:
|
||||
1. This configuration uses the default USART1 serial console. That
|
||||
@ -1052,11 +1173,11 @@ Configurations
|
||||
System Type -> SAMA5 Peripheral Support
|
||||
CONFIG_SAMA5_SPI0=y : Enable SPI0
|
||||
|
||||
Device Drivers -> Memory Technology Device (MTD) Support
|
||||
Device Drivers -> SPI Driver Support
|
||||
CONFIG_SPI=y : Enable SPI support
|
||||
CONFIG_SPI_EXCHANGE=y : Support the exchange method
|
||||
|
||||
Device Drivers -> SPI Driver Support
|
||||
Device Drivers -> Memory Technology Device (MTD) Support
|
||||
CONFIG_MTD=y : Enable MTD support
|
||||
CONFIG_MTD_AT25=y : Enable the AT25 driver
|
||||
CONFIG_AT25_SPIMODE=0 : Use SPI mode 0
|
||||
@ -1359,8 +1480,9 @@ Configurations
|
||||
speed USB FLASH drive using the Mass Storage Class (MSC) interface.
|
||||
|
||||
2013-8-31: Added description to add UDPHS high-speed USB device
|
||||
support. That function is still, however, a long way from being
|
||||
functional.
|
||||
support.
|
||||
2013-9-5: The UDPHS driver is basically functional, subject to more
|
||||
testing.
|
||||
|
||||
ostest:
|
||||
This configuration directory, performs a simple OS test using
|
||||
|
||||
136
configs/sama5d3x-ek/demo/Make.defs
Normal file
136
configs/sama5d3x-ek/demo/Make.defs
Normal file
@ -0,0 +1,136 @@
|
||||
############################################################################
|
||||
# configs/sama5d3x-ek/demo/Make.defs
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
include ${TOPDIR}/tools/Config.mk
|
||||
include ${TOPDIR}$(DELIM)arch$(DELIM)arm$(DELIM)src$(DELIM)armv7-a$(DELIM)Toolchain.defs
|
||||
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_ISRAM),y)
|
||||
LDSCRIPT = isram.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_SDRAM),y)
|
||||
LDSCRIPT = ddram.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS0FLASH),y)
|
||||
LDSCRIPT = norflash.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS1FLASH),y)
|
||||
# LDSCRIPT = cs1flash.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS2FLASH),y)
|
||||
# LDSCRIPT = cs2flash.ld
|
||||
endif
|
||||
ifeq ($(CONFIG_SAMA5_BOOT_CS3FLASH),y)
|
||||
# LDSCRIPT = cs3flash.ld
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include}" -isystem "${shell cygpath -w $(TOPDIR)$(DELIM)include$(DELIM)cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)$(DELIM)include -isystem $(TOPDIR)$(DELIM)include$(DELIM)cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)$(DELIM)configs$(DELIM)$(CONFIG_ARCH_BOARD)$(DELIM)scripts$(DELIM)$(LDSCRIPT)
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(ARCROSSDEV)ar rcs
|
||||
NM = $(ARCROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCPUFLAGS = -mcpu=cortex-a5 -mfpu=vfpv4-d16
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fno-rtti
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)$(DELIM)binfmt$(DELIM)libnxflat$(DELIM)gnu-nxflat-pcrel.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-nuttx-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
ifeq ($(CONFIG_HOST_WINDOWS),y)
|
||||
HOSTEXEEXT = .exe
|
||||
else
|
||||
HOSTEXEEXT =
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native host tools
|
||||
DIRLINK = $(TOPDIR)$(DELIM)tools$(DELIM)copydir.sh
|
||||
DIRUNLINK = $(TOPDIR)$(DELIM)tools$(DELIM)unlink.sh
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mknulldeps.sh
|
||||
else
|
||||
# Linux/Cygwin-native host tools
|
||||
MKDEP = $(TOPDIR)$(DELIM)tools$(DELIM)mkdeps$(HOSTEXEEXT)
|
||||
endif
|
||||
|
||||
771
configs/sama5d3x-ek/demo/defconfig
Normal file
771
configs/sama5d3x-ek/demo/defconfig
Normal file
@ -0,0 +1,771 @@
|
||||
#
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Build Setup
|
||||
#
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
# CONFIG_HOST_LINUX is not set
|
||||
# CONFIG_HOST_OSX is not set
|
||||
CONFIG_HOST_WINDOWS=y
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
# CONFIG_WINDOWS_NATIVE is not set
|
||||
CONFIG_WINDOWS_CYGWIN=y
|
||||
# CONFIG_WINDOWS_MSYS is not set
|
||||
# CONFIG_WINDOWS_OTHER is not set
|
||||
|
||||
#
|
||||
# Build Configuration
|
||||
#
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Binary Output Formats
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# Customize Header Files
|
||||
#
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
CONFIG_ARCH_CHIP_SAMA5=y
|
||||
# CONFIG_ARCH_CHIP_SAM34 is not set
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
# CONFIG_ARCH_ARM7TDMI is not set
|
||||
# CONFIG_ARCH_ARM926EJS is not set
|
||||
# CONFIG_ARCH_ARM920T is not set
|
||||
# CONFIG_ARCH_CORTEXM0 is not set
|
||||
# CONFIG_ARCH_CORTEXM3 is not set
|
||||
# CONFIG_ARCH_CORTEXM4 is not set
|
||||
CONFIG_ARCH_CORTEXA5=y
|
||||
# CONFIG_ARCH_CORTEXA8 is not set
|
||||
CONFIG_ARCH_FAMILY="armv7-a"
|
||||
CONFIG_ARCH_CHIP="sama5"
|
||||
CONFIG_ARCH_HAVE_FPU=y
|
||||
CONFIG_ARCH_FPU=y
|
||||
# CONFIG_ARCH_HAVE_MPU is not set
|
||||
CONFIG_ARCH_HAVE_LOWVECTORS=y
|
||||
CONFIG_ARCH_LOWVECTORS=y
|
||||
CONFIG_PGTABLE_VADDR=0x20000000
|
||||
# CONFIG_ARCH_ROMPGTABLE is not set
|
||||
# CONFIG_PAGING is not set
|
||||
|
||||
#
|
||||
# ARMv7-A Configuration Options
|
||||
#
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_BUILDROOT is not set
|
||||
CONFIG_ARMV7A_TOOLCHAIN_CODESOURCERYW=y
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_DEVKITARM is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIL is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_EABIW is not set
|
||||
# CONFIG_ARMV7A_TOOLCHAIN_GNU_OABI is not set
|
||||
|
||||
#
|
||||
# ATSAMA5 Configuration Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_ATSAMA5D31 is not set
|
||||
CONFIG_ARCH_CHIP_ATSAMA5D33=y
|
||||
# CONFIG_ARCH_CHIP_ATSAMA5D34 is not set
|
||||
# CONFIG_ARCH_CHIP_ATSAMA5D35 is not set
|
||||
|
||||
#
|
||||
# ATSAMA5 Peripheral Support
|
||||
#
|
||||
# CONFIG_SAMA5_DBGU is not set
|
||||
# CONFIG_SAMA5_PIT is not set
|
||||
# CONFIG_SAMA5_WDT is not set
|
||||
CONFIG_SAMA5_HSMC=y
|
||||
# CONFIG_SAMA5_SMD is not set
|
||||
# CONFIG_SAMA5_UART0 is not set
|
||||
# CONFIG_SAMA5_UART1 is not set
|
||||
# CONFIG_SAMA5_USART0 is not set
|
||||
CONFIG_SAMA5_USART1=y
|
||||
# CONFIG_SAMA5_USART2 is not set
|
||||
# CONFIG_SAMA5_USART3 is not set
|
||||
# CONFIG_SAMA5_TWI0 is not set
|
||||
# CONFIG_SAMA5_TWI1 is not set
|
||||
# CONFIG_SAMA5_TWI2 is not set
|
||||
# CONFIG_SAMA5_HSMCI0 is not set
|
||||
# CONFIG_SAMA5_HSMCI1 is not set
|
||||
# CONFIG_SAMA5_HSMCI2 is not set
|
||||
CONFIG_SAMA5_SPI0=y
|
||||
# CONFIG_SAMA5_SPI1 is not set
|
||||
# CONFIG_SAMA5_TC0 is not set
|
||||
# CONFIG_SAMA5_TC1 is not set
|
||||
# CONFIG_SAMA5_PWM is not set
|
||||
# CONFIG_SAMA5_ADC is not set
|
||||
CONFIG_SAMA5_DMAC0=y
|
||||
# CONFIG_SAMA5_DMAC1 is not set
|
||||
# CONFIG_SAMA5_UHPHS is not set
|
||||
# CONFIG_SAMA5_UDPHS is not set
|
||||
# CONFIG_SAMA5_GMAC is not set
|
||||
# CONFIG_SAMA5_EMAC is not set
|
||||
# CONFIG_SAMA5_LCDC is not set
|
||||
# CONFIG_SAMA5_ISI is not set
|
||||
# CONFIG_SAMA5_SSC0 is not set
|
||||
# CONFIG_SAMA5_SSC1 is not set
|
||||
# CONFIG_SAMA5_CAN0 is not set
|
||||
# CONFIG_SAMA5_CAN1 is not set
|
||||
# CONFIG_SAMA5_SHA is not set
|
||||
# CONFIG_SAMA5_AES is not set
|
||||
# CONFIG_SAMA5_TDES is not set
|
||||
# CONFIG_SAMA5_TRNG is not set
|
||||
# CONFIG_SAMA5_ARM is not set
|
||||
# CONFIG_SAMA5_FUSE is not set
|
||||
CONFIG_SAMA5_MPDDRC=y
|
||||
# CONFIG_SAMA5_PIO_IRQ is not set
|
||||
|
||||
#
|
||||
# SPI device driver options
|
||||
#
|
||||
CONFIG_SAMA5_SPI_DMA=y
|
||||
CONFIG_SAMA5_SPI_DMATHRESHOLD=4
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
CONFIG_SAMA5_DDRCS=y
|
||||
CONFIG_SAMA5_DDRCS_SIZE=268435456
|
||||
# CONFIG_SAMA5_DDRCS_LPDDR1 is not set
|
||||
CONFIG_SAMA5_DDRCS_LPDDR2=y
|
||||
CONFIG_SAMA5_EBICS0=y
|
||||
CONFIG_SAMA5_EBICS0_SIZE=134217728
|
||||
# CONFIG_SAMA5_EBICS0_SRAM is not set
|
||||
# CONFIG_SAMA5_EBICS0_PSRAM is not set
|
||||
# CONFIG_SAMA5_EBICS0_PROM is not set
|
||||
# CONFIG_SAMA5_EBICS0_EEPROM is not set
|
||||
# CONFIG_SAMA5_EBICS0_EPROM is not set
|
||||
# CONFIG_SAMA5_EBICS0_LCD is not set
|
||||
CONFIG_SAMA5_EBICS0_NOR=y
|
||||
# CONFIG_SAMA5_EBICS0_NAND is not set
|
||||
# CONFIG_SAMA5_EBICS1 is not set
|
||||
# CONFIG_SAMA5_EBICS2 is not set
|
||||
# CONFIG_SAMA5_EBICS3 is not set
|
||||
# CONFIG_SAMA5_BOOT_ISRAM is not set
|
||||
# CONFIG_SAMA5_BOOT_SDRAM is not set
|
||||
CONFIG_SAMA5_BOOT_CS0FLASH=y
|
||||
|
||||
#
|
||||
# Heap Configuration
|
||||
#
|
||||
CONFIG_SAMA5_ISRAM_HEAP=y
|
||||
CONFIG_SAMA5_DDRCS_HEAP=y
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
CONFIG_ARCH_DMA=y
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_HAVE_MMU=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
# CONFIG_ARCH_HAVE_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=49341
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Boot Memory Configuration
|
||||
#
|
||||
CONFIG_RAM_START=0x00304000
|
||||
CONFIG_RAM_VSTART=0x00304000
|
||||
CONFIG_RAM_SIZE=114688
|
||||
CONFIG_FLASH_START=0x10000000
|
||||
CONFIG_FLASH_VSTART=0x10000000
|
||||
CONFIG_FLASH_SIZE=134217728
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_SAMA5D3X_EK=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="sama5d3x-ek"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
# CONFIG_ARCH_BUTTONS is not set
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
CONFIG_SAMA5_MT47H128M16RT=y
|
||||
# CONFIG_SAMA5_MT47H64M16HR is not set
|
||||
CONFIG_SAMA5_AT25_AUTOMOUNT=y
|
||||
CONFIG_SAMA5_AT25_FTL=y
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2013
|
||||
CONFIG_START_MONTH=7
|
||||
CONFIG_START_DAY=31
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_SCHED_WAITPID=y
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="nsh_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
|
||||
#
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
CONFIG_SPI=y
|
||||
# CONFIG_SPI_OWNBUS is not set
|
||||
CONFIG_SPI_EXCHANGE=y
|
||||
# CONFIG_SPI_CMDDATA is not set
|
||||
# CONFIG_SPI_BITBANG is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
CONFIG_MTD=y
|
||||
|
||||
#
|
||||
# MTD Configuration
|
||||
#
|
||||
# CONFIG_MTD_PARTITION is not set
|
||||
# CONFIG_MTD_BYTE_WRITE is not set
|
||||
|
||||
#
|
||||
# MTD Device Drivers
|
||||
#
|
||||
# CONFIG_RAMMTD is not set
|
||||
# CONFIG_MTD_AT24XX is not set
|
||||
CONFIG_MTD_AT25=y
|
||||
CONFIG_AT25_SPIMODE=0
|
||||
CONFIG_AT25_SPIFREQUENCY=20000000
|
||||
# CONFIG_MTD_AT45DB is not set
|
||||
# CONFIG_MTD_M25P is not set
|
||||
# CONFIG_MTD_SMART is not set
|
||||
# CONFIG_MTD_RAMTRON is not set
|
||||
# CONFIG_MTD_SST25 is not set
|
||||
# CONFIG_MTD_SST39FV is not set
|
||||
# CONFIG_MTD_W25 is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_USART1=y
|
||||
|
||||
#
|
||||
# USART Configuration
|
||||
#
|
||||
CONFIG_USART1_ISUART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_STANDARD_SERIAL=y
|
||||
CONFIG_USART1_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# USART1 Configuration
|
||||
#
|
||||
CONFIG_USART1_RXBUFSIZE=256
|
||||
CONFIG_USART1_TXBUFSIZE=256
|
||||
CONFIG_USART1_BAUD=115200
|
||||
CONFIG_USART1_BITS=8
|
||||
CONFIG_USART1_PARITY=0
|
||||
CONFIG_USART1_2STOP=0
|
||||
# CONFIG_USART1_IFLOWCONTROL is not set
|
||||
# CONFIG_USART1_OFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_IFLOWCONTROL is not set
|
||||
# CONFIG_SERIAL_OFLOWCONTROL is not set
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
# CONFIG_DISABLE_MOUNTPOINT is not set
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
CONFIG_FS_FAT=y
|
||||
CONFIG_FAT_LCNAMES=y
|
||||
CONFIG_FAT_LFN=y
|
||||
CONFIG_FAT_MAXFNAME=32
|
||||
# CONFIG_FS_FATTIME is not set
|
||||
# CONFIG_FAT_DMAMEMORY is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
# CONFIG_FS_BINFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=2
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
CONFIG_BUILTIN=y
|
||||
# CONFIG_PIC is not set
|
||||
CONFIG_SYMTAB_ORDEREDBYNAME=y
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
CONFIG_HAVE_CXX=y
|
||||
CONFIG_HAVE_CXXINITIALIZE=y
|
||||
# CONFIG_CXX_NEWLONG is not set
|
||||
|
||||
#
|
||||
# uClibc++ Standard C++ Library
|
||||
#
|
||||
# CONFIG_UCLIBCXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
CONFIG_BUILTIN_PROXY_STACKSIZE=1024
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_CC3000BASIC is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_CXXTEST is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
# CONFIG_EXAMPLES_OSTEST is not set
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART_TEST is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
CONFIG_NSH_LIBRARY=y
|
||||
CONFIG_NSH_BUILTIN_APPS=y
|
||||
|
||||
#
|
||||
# Disable Individual commands
|
||||
#
|
||||
# CONFIG_NSH_DISABLE_CAT is not set
|
||||
# CONFIG_NSH_DISABLE_CD is not set
|
||||
# CONFIG_NSH_DISABLE_CP is not set
|
||||
# CONFIG_NSH_DISABLE_CMP is not set
|
||||
# CONFIG_NSH_DISABLE_DD is not set
|
||||
# CONFIG_NSH_DISABLE_ECHO is not set
|
||||
# CONFIG_NSH_DISABLE_EXEC is not set
|
||||
# CONFIG_NSH_DISABLE_EXIT is not set
|
||||
# CONFIG_NSH_DISABLE_FREE is not set
|
||||
# CONFIG_NSH_DISABLE_GET is not set
|
||||
# CONFIG_NSH_DISABLE_HELP is not set
|
||||
# CONFIG_NSH_DISABLE_HEXDUMP is not set
|
||||
# CONFIG_NSH_DISABLE_IFCONFIG is not set
|
||||
# CONFIG_NSH_DISABLE_KILL is not set
|
||||
# CONFIG_NSH_DISABLE_LOSETUP is not set
|
||||
# CONFIG_NSH_DISABLE_LS is not set
|
||||
# CONFIG_NSH_DISABLE_MB is not set
|
||||
# CONFIG_NSH_DISABLE_MKDIR is not set
|
||||
# CONFIG_NSH_DISABLE_MKFATFS is not set
|
||||
# CONFIG_NSH_DISABLE_MKFIFO is not set
|
||||
# CONFIG_NSH_DISABLE_MKRD is not set
|
||||
# CONFIG_NSH_DISABLE_MH is not set
|
||||
# CONFIG_NSH_DISABLE_MOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_MW is not set
|
||||
# CONFIG_NSH_DISABLE_NSFMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_PS is not set
|
||||
# CONFIG_NSH_DISABLE_PING is not set
|
||||
# CONFIG_NSH_DISABLE_PUT is not set
|
||||
# CONFIG_NSH_DISABLE_PWD is not set
|
||||
# CONFIG_NSH_DISABLE_RM is not set
|
||||
# CONFIG_NSH_DISABLE_RMDIR is not set
|
||||
# CONFIG_NSH_DISABLE_SET is not set
|
||||
# CONFIG_NSH_DISABLE_SH is not set
|
||||
# CONFIG_NSH_DISABLE_SLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_TEST is not set
|
||||
# CONFIG_NSH_DISABLE_UMOUNT is not set
|
||||
# CONFIG_NSH_DISABLE_UNSET is not set
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=80
|
||||
CONFIG_NSH_MAXARGUMENTS=6
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
# CONFIG_NSH_DISABLESCRIPT is not set
|
||||
# CONFIG_NSH_DISABLEBG is not set
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
|
||||
#
|
||||
# USB Trace Support
|
||||
#
|
||||
# CONFIG_NSH_CONDEV is not set
|
||||
CONFIG_NSH_ARCHINIT=y
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FLASH_ERASEALL is not set
|
||||
|
||||
#
|
||||
# RAM test
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTEST is not set
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
CONFIG_SYSTEM_READLINE=y
|
||||
CONFIG_READLINE_ECHO=y
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
#
|
||||
# Zmodem Commands
|
||||
#
|
||||
# CONFIG_SYSTEM_ZMODEM is not set
|
||||
76
configs/sama5d3x-ek/demo/setenv.sh
Executable file
76
configs/sama5d3x-ek/demo/setenv.sh
Executable file
@ -0,0 +1,76 @@
|
||||
#!/bin/bash
|
||||
# configs/samard3x-ek/demo/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$_" = "$0" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
WD=`pwd`
|
||||
if [ ! -x "setenv.sh" ]; then
|
||||
echo "This script must be executed from the top-level NuttX build directory"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then
|
||||
export PATH_ORIG="${PATH}"
|
||||
fi
|
||||
|
||||
# This is the Cygwin path to the location where I installed the Atmel GCC
|
||||
# toolchain under Windows. You will also have to edit this if you install
|
||||
# this toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/Atmel/Atmel Toolchain/ARM GCC/Native/4.7.3.99/arm-gnu-toolchain/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I installed the CodeSourcery
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the CodeSourcery toolchain in any other location
|
||||
#export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin"
|
||||
export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin"
|
||||
|
||||
# These are the Cygwin paths to the locations where I installed the Atollic
|
||||
# toolchain under windows. You will also have to edit this if you install
|
||||
# the Atollic toolchain in any other location. /usr/bin is added before
|
||||
# the Atollic bin path because there is are binaries named gcc.exe and g++.exe
|
||||
# at those locations as well.
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for ARM Pro 2.3.0/ARMTools/bin"
|
||||
#export TOOLCHAIN_BIN="/usr/bin:/cygdrive/c/Program Files (x86)/Atollic/TrueSTUDIO for STMicroelectronics STM32 Lite 2.3.0/ARMTools/bin"
|
||||
|
||||
# This is the Cygwin path to the location where I build the buildroot
|
||||
# toolchain.
|
||||
#export TOOLCHAIN_BIN="${WD}/../misc/buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
|
||||
# Add the path to the toolchain to the PATH varialble
|
||||
export PATH="${TOOLCHAIN_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
Loading…
Reference in New Issue
Block a user