Fix LPC2148 PLL setup
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@925 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
4f5b358522
commit
e360e806dc
@ -1,7 +1,7 @@
|
||||
/************************************************************
|
||||
/****************************************************************************
|
||||
* common/up_schedulesigaction.c
|
||||
*
|
||||
* Copyright (C) 2007 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2007, 2008 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -14,7 +14,7 @@
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name Gregory Nutt nor the names of its contributors may be
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
@ -31,38 +31,43 @@
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <sched.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/arch.h>
|
||||
|
||||
#include "os_internal.h"
|
||||
#include "up_internal.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
/************************************************************
|
||||
#ifndef CONFIG_DISABLE_SIGNALS
|
||||
|
||||
/****************************************************************************
|
||||
* Private Definitions
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************
|
||||
/****************************************************************************
|
||||
* Private Funtions
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************
|
||||
/****************************************************************************
|
||||
* Public Funtions
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
/************************************************************
|
||||
/****************************************************************************
|
||||
* Name: up_schedule_sigaction
|
||||
*
|
||||
* Description:
|
||||
@ -93,7 +98,7 @@
|
||||
* currently executing task -- just call the signal
|
||||
* handler now.
|
||||
*
|
||||
************************************************************/
|
||||
****************************************************************************/
|
||||
|
||||
void up_schedule_sigaction(_TCB *tcb, sig_deliver_t sigdeliver)
|
||||
{
|
||||
@ -188,3 +193,5 @@ void up_schedule_sigaction(_TCB *tcb, sig_deliver_t sigdeliver)
|
||||
irqrestore(flags);
|
||||
}
|
||||
}
|
||||
|
||||
#endif /* !CONFIG_DISABLE_SIGNALS */
|
||||
|
||||
@ -38,15 +38,20 @@
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <sched.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/irq.h>
|
||||
#include <nuttx/arch.h>
|
||||
|
||||
#include "os_internal.h"
|
||||
#include "up_internal.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
#ifndef CONFIG_DISABLE_SIGNALS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
@ -135,3 +140,6 @@ void up_sigdeliver(void)
|
||||
up_fullcontextrestore(regs);
|
||||
#endif
|
||||
}
|
||||
|
||||
#endif /* !CONFIG_DISABLE_SIGNALS */
|
||||
|
||||
|
||||
@ -40,10 +40,13 @@ CMN_CSRCS = up_allocateheap.c up_assert.c up_blocktask.c up_copystate.c \
|
||||
up_createstack.c up_dataabort.c up_mdelay.c up_udelay.c \
|
||||
up_exit.c up_idle.c up_initialize.c up_initialstate.c \
|
||||
up_interruptcontext.c up_prefetchabort.c up_releasepending.c \
|
||||
up_releasestack.c up_reprioritizertr.c up_schedulesigaction.c \
|
||||
up_sigdeliver.c up_syscall.c up_unblocktask.c \
|
||||
up_releasestack.c up_reprioritizertr.c up_syscall.c up_unblocktask.c \
|
||||
up_undefinedinsn.c up_usestack.c
|
||||
|
||||
ifneq ($(CONFIG_DISABLE_SIGNALS),y)
|
||||
CMN_CSRCS += up_schedulesigaction.c up_sigdeliver.c
|
||||
endif
|
||||
|
||||
CHIP_ASRCS = lpc214x_lowputc.S
|
||||
CHIP_CSRCS = lpc214x_decodeirq.c lpc214x_irq.c lpc214x_timerisr.c \
|
||||
lpc214x_serial.c
|
||||
|
||||
@ -1,80 +0,0 @@
|
||||
/*
|
||||
* The STARTUP.S code is executed after CPU Reset. This file may be
|
||||
* translated with the following SET symbols. In uVision these SET
|
||||
* symbols are entered under Options - ASM - Set.
|
||||
*
|
||||
* REMAP: when set the startup code initializes the register MEMMAP
|
||||
* which overwrites the settings of the CPU configuration pins. The
|
||||
* startup and interrupt vectors are remapped from:
|
||||
* 0x00000000 default setting (not remapped)
|
||||
* 0x80000000 when EXTMEM_MODE is used
|
||||
* 0x40000000 when RAM_MODE is used
|
||||
*
|
||||
* EXTMEM_MODE: when set the device is configured for code execution
|
||||
* from external memory starting at address 0x80000000. The startup
|
||||
* vectors are located to 0x80000000.
|
||||
*
|
||||
* RAM_MODE: when set the device is configured for code execution
|
||||
* from on-chip RAM starting at address 0x40000000. The startup
|
||||
* vectors are located to 0x40000000.
|
||||
*/
|
||||
|
||||
Reset_Handler:
|
||||
|
||||
|
||||
|
||||
/* Memory Mapping */
|
||||
|
||||
|
||||
/* Setup Stack for each mode */
|
||||
ldr r0, =Top_Stack
|
||||
|
||||
/* Enter Undefined Instruction Mode and set its Stack Pointer */
|
||||
msr CPSR_c, #UND_MODE | PSR_I_BIT | PSR_F_BIT
|
||||
mov SP, r0
|
||||
sub r0, r0, #UND_Stack_Size
|
||||
|
||||
/* Enter Abort Mode and set its Stack Pointer */
|
||||
msr CPSR_c, #ABT_MODE | PSR_I_BIT | PSR_F_BIT
|
||||
mov SP, r0
|
||||
sub r0, r0, #ABT_Stack_Size
|
||||
|
||||
/* Enter FIQ Mode and set its Stack Pointer */
|
||||
msr CPSR_c, #FIQ_MODE | PSR_I_BIT | PSR_F_BIT
|
||||
mov SP, r0
|
||||
sub r0, r0, #FIQ_Stack_Size
|
||||
|
||||
/* Enter IRQ Mode and set its Stack Pointer */
|
||||
msr CPSR_c, #IRQ_MODE | PSR_I_BIT | PSR_F_BIT
|
||||
mov SP, r0
|
||||
sub r0, r0, #IRQ_Stack_Size
|
||||
|
||||
/* Enter Supervisor Mode and set its Stack Pointer */
|
||||
msr CPSR_c, #SVC_MODE | PSR_I_BIT | PSR_F_BIT
|
||||
mov SP, r0
|
||||
sub r0, r0, #SVC_Stack_Size
|
||||
|
||||
/* Enter User Mode and set its Stack Pointer */
|
||||
msr CPSR_c, #USR_MODE
|
||||
mov SP, r0
|
||||
|
||||
/* Enter the C code */
|
||||
ldr r0,=?C?INIT
|
||||
tst r0,#1 ; Bit-0 set: INIT is Thumb
|
||||
ldreq LR,=exit?A ; ARM Mode
|
||||
ldrne LR,=exit?T ; Thumb Mode
|
||||
bx r0
|
||||
ENDP
|
||||
|
||||
PUBLIC exit?A
|
||||
exit?A PROC CODE32
|
||||
B exit?A
|
||||
ENDP
|
||||
|
||||
PUBLIC exit?T
|
||||
exit?T PROC CODE16
|
||||
exit: B exit?T
|
||||
ENDP
|
||||
|
||||
|
||||
END
|
||||
@ -256,8 +256,20 @@
|
||||
|
||||
#define LPC214X_PLL_CFG_MSEL (0x1f << 0) /* PLL Multiplier */
|
||||
#define LPC214X_PLL_CFG_PSEL (0x03 << 5) /* PLL Divider */
|
||||
|
||||
/* PLL Status Register Bit Settings */
|
||||
|
||||
#define LPC214X_PLL_STAT_MSEL (0x1f << 0) /* PLL Multiplier Readback */
|
||||
#define LPC214X_PLL_STAT_PSEL (0x03 << 5) /* PLL Divider Readback */
|
||||
#define LPC214X_PLL_STAT_PLLE (1 << 8) /* PLL Enable Readback */
|
||||
#define LPC214X_PLL_STAT_PLLC (1 << 9) /* PLL Connect Readback */
|
||||
#define LPC214X_PLL_STAT_PLOCK (1 << 10) /* PLL Lock Status */
|
||||
|
||||
/* PLL Feed Register values */
|
||||
|
||||
#define LPC214X_PLL_FEED1 0xaa
|
||||
#define LPC214X_PLL_FEED2 0x55
|
||||
|
||||
/* Power Control register offsets */
|
||||
|
||||
#define LPC214X_PCON_OFFSET 0x00 /* Control Register */
|
||||
|
||||
@ -67,7 +67,9 @@
|
||||
|
||||
/* This type arry maps 4 bits into the bit number of the lowest bit that it set */
|
||||
|
||||
#ifndef CONFIG_SUPPRESS_INTERRUPTS
|
||||
static uint8 g_nibblemap[16] = { 0, 0, 1, 0, 2, 0, 1, 0, 3, 0, 1, 0, 2, 0, 1, 0 };
|
||||
#endif
|
||||
|
||||
/********************************************************************************
|
||||
* Private Functions
|
||||
|
||||
@ -38,6 +38,8 @@
|
||||
*****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_internal.h"
|
||||
#include "up_arch.h"
|
||||
|
||||
@ -92,6 +94,12 @@
|
||||
# define CONFIG_PLLCFG_VALUE 0x00000024
|
||||
#endif
|
||||
|
||||
/* PLL Control register */
|
||||
|
||||
#ifndef CONFIG_PLLCON_VALUE /* Can be selected from config file */
|
||||
# define CONFIG_PLLCON_VALUE LPC214X_PLL_CON_PLLE
|
||||
#endif
|
||||
|
||||
/* Memory Accelerator Module (MAM) initialization values
|
||||
*
|
||||
* MAM Control Register
|
||||
@ -265,32 +273,32 @@
|
||||
/* Configure the PLL */
|
||||
|
||||
.macro configpll, base, val1, val2, val3
|
||||
#ifdef LPC214X_PLL_SETUP
|
||||
#ifdef CONFIG_PLL_SETUP
|
||||
ldr \base, =LPC214X_PLL_BASE
|
||||
mov \val1, #0xaa
|
||||
mov \val2, #0x55
|
||||
mov \val1, #LPC214X_PLL_FEED1
|
||||
mov \val2, #LPC214X_PLL_FEED2
|
||||
|
||||
/* Configure and Enable PLL */
|
||||
|
||||
mov \val3, #CONFIG_PLLCFG_VALUE
|
||||
str \val3, [\base, #LPC214X_PLLCFG_OFFSET]
|
||||
mov \val3, #LPC214X_PLLCON_PLLE
|
||||
str \val3, [\base, #LPC214X_PLLCON_OFFSET]
|
||||
str \val1, [\base, #LPC214X_PLLFEED_OFFSET]
|
||||
str \val2, [\base, #LPC214X_PLLFEED_OFFSET]
|
||||
str \val3, [\base, #LPC214X_PLL_CFG_OFFSET]
|
||||
mov \val3, #CONFIG_PLLCON_VALUE
|
||||
str \val3, [\base, #LPC214X_PLL_CON_OFFSET]
|
||||
str \val1, [\base, #LPC214X_PLL_FEED_OFFSET]
|
||||
str \val2, [\base, #LPC214X_PLL_FEED_OFFSET]
|
||||
|
||||
/* Wait until PLL Locked */
|
||||
1:
|
||||
ldr \val3, [\base, #LPC214X_PLLSTAT_OFFSET]
|
||||
ands \val3, \val3, #LPC214X_PLLSTAT_PLOCK
|
||||
ldr \val3, [\base, #LPC214X_PLL_STAT_OFFSET]
|
||||
ands \val3, \val3, #LPC214X_PLL_STAT_PLOCK
|
||||
beq 1b
|
||||
|
||||
/* Switch to PLL Clock */
|
||||
|
||||
mov \val3, #(LPC214X_PLLCON_PLLE | LPC214X_PLLCON_PLLC)
|
||||
str \val3, [\base, #LPC214X_PLLCON__OFFSET]
|
||||
str \val1, [\base, #LPC214X_PLLFEED_OFFSET]
|
||||
str \val2, [\base, #LPC214X_PLLFEED_OFFSET]
|
||||
mov \val3, #(LPC214X_PLL_CON_PLLE | LPC214X_PLL_CON_PLLC)
|
||||
str \val3, [\base, #LPC214X_PLL_CON_OFFSET]
|
||||
str \val1, [\base, #LPC214X_PLL_FEED_OFFSET]
|
||||
str \val2, [\base, #LPC214X_PLL_FEED_OFFSET]
|
||||
#endif
|
||||
.endm
|
||||
|
||||
|
||||
@ -99,6 +99,8 @@
|
||||
#endif
|
||||
|
||||
#define LPC214X_LCR_VALUE (LPC214X_LCR_CHAR | LPC214X_LCR_PAR | LPC214X_LCR_STOP)
|
||||
#define LPC214X_FCR_VALUE (LPC214X_FCR_FIFO_TRIG8 | LPC214X_FCR_TX_FIFO_RESET |\
|
||||
LPC214X_FCR_RX_FIFO_RESET | LPC214X_FCR_FIFO_ENABLE)
|
||||
|
||||
/**************************************************************************
|
||||
* Private Types
|
||||
@ -174,7 +176,7 @@ up_lowsetup:
|
||||
|
||||
/* Configure parity, data bits, stop bits and set DLAB=1 */
|
||||
|
||||
ldr r0, =LPC214X_UART0_BASE
|
||||
ldr r0, =LPC214X_UART_BASE
|
||||
mov r1, #(LPC214X_LCR_VALUE | LPC214X_LCR_DLAB_ENABLE)
|
||||
strb r1, [r0, #LPC214X_UART_LCR_OFFSET]
|
||||
|
||||
@ -191,6 +193,11 @@ up_lowsetup:
|
||||
mov r1, #LPC214X_LCR_VALUE
|
||||
strb r1, [r0, #LPC214X_UART_LCR_OFFSET]
|
||||
|
||||
/* Configure the FIFOs */
|
||||
|
||||
mov r1, #LPC214X_FCR_VALUE
|
||||
strb r1, [r0, #LPC214X_UART_FCR_OFFSET]
|
||||
|
||||
/* And return */
|
||||
|
||||
mov pc, lr
|
||||
|
||||
@ -78,7 +78,7 @@
|
||||
|
||||
/* FIFO Control Register (FCR) bit definitions */
|
||||
|
||||
#define LPC214X_FCR_FIFO_ENABLE (1 << 0) /* FIFO wnable */
|
||||
#define LPC214X_FCR_FIFO_ENABLE (1 << 0) /* FIFO enable */
|
||||
#define LPC214X_FCR_RX_FIFO_RESET (1 << 1) /* Reset receive FIFO */
|
||||
#define LPC214X_FCR_TX_FIFO_RESET (1 << 2) /* Reset transmit FIFO */
|
||||
#define LPC214X_FCR_FIFO_TRIG1 (0 << 6) /* Trigger @1 character in FIFO */
|
||||
|
||||
@ -57,7 +57,7 @@ CONFIG_ARCH_CHIP=lpc214x
|
||||
CONFIG_ARCH_LPC2148=y
|
||||
CONFIG_ARCH_BOARD=mcu123-lpc214x
|
||||
CONFIG_ARCH_BOARD_MCU123=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=1250
|
||||
CONFIG_BOARD_LOOPSPERMSEC=2778
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_DRAM_SIZE=0x02000000
|
||||
CONFIG_DRAM_START=0x40000000
|
||||
@ -163,9 +163,9 @@ CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2007
|
||||
CONFIG_START_MONTH=2
|
||||
CONFIG_START_DAY=13
|
||||
CONFIG_START_YEAR=2008
|
||||
CONFIG_START_MONTH=9
|
||||
CONFIG_START_DAY=17
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
|
||||
|
||||
@ -57,17 +57,6 @@
|
||||
|
||||
#define LPC214X_PCLKFREQ (LPC214X_FOSC/4) /* PCLK must be FOSC/4 */
|
||||
|
||||
#define LPC214X_PSEL0 5
|
||||
#define LPC214X_PSEL1 6
|
||||
|
||||
#define LPC214X_PLLE 0
|
||||
#define LPC214X_PLLC 1
|
||||
|
||||
#define LPC214X_PLOCK 10
|
||||
|
||||
#define LPC214X_PLL_FEED1 0xaa
|
||||
#define LPC214X_PLL_FEED2 0x55
|
||||
|
||||
/* LED definitions **********************************************************/
|
||||
|
||||
#define LED_STARTED 0
|
||||
|
||||
Loading…
Reference in New Issue
Block a user