diff --git a/arch/arm/src/lpc313x/lpc313x_i2c.h b/arch/arm/src/lpc313x/lpc313x_i2c.h new file mode 100755 index 0000000000..64044f948d --- /dev/null +++ b/arch/arm/src/lpc313x/lpc313x_i2c.h @@ -0,0 +1,207 @@ +/************************************************************************************************ + * arch/arm/src/lpc313x/lpc313x_i2c.h + * + * Copyright (C) 2009 Gregory Nutt. All rights reserved. + * Author: Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************************/ + +#ifndef __ARCH_ARM_SRC_LPC313X_I2C_H +#define __ARCH_ARM_SRC_LPC313X_I2C_H + +/************************************************************************************************ + * Included Files + ************************************************************************************************/ + +#include +#include "lpc313x_memorymap.h" + +/************************************************************************************************ + * Pre-processor Definitions + ************************************************************************************************/ + +/* I2C register base address offset into the APB1 domain ****************************************/ + +#define LPC313X_I2C0_VBASE (LPC313X_APB1_VSECTION+LPC313X_APB1_I2C0_OFFSET) +#define LPC313X_I2C0_PBASE (LPC313X_APB1_PSECTION+LPC313X_APB1_I2C0_OFFSET) + +#define LPC313X_I2C1_VBASE (LPC313X_APB1_VSECTION+LPC313X_APB1_I2C1_OFFSET) +#define LPC313X_I2C1_PBASE (LPC313X_APB1_PSECTION+LPC313X_APB1_I2C1_OFFSET) + +/* I2C register offsets (with respect to the I2C base) ******************************************/ + +#define LPC313X_I2C_RX_OFFSET 0x00 /* I2C RX Data FIFO */ +#define LPC313X_I2C_TX_OFFSET 0x00 /* I2C TX Data FIFO */ +#define LPC313X_I2C_STAT_OFFSET 0x04 /* I2C Status Register */ +#define LPC313X_I2C_CTRL_OFFSET 0x08 /* I2C Control Register */ +#define LPC313X_I2C_CLKHI_OFFSET 0x0c /* I2C Clock Divider high */ +#define LPC313X_I2C_CLKLO_OFFSET 0x10 /* I2C Clock Divider low */ +#define LPC313X_I2C_ADR_OFFSET 0x14 /* I2C Slave Address */ +#define LPC313X_I2C_RXFL_OFFSET 0x18 /* I2C Rx FIFO level */ +#define LPC313X_I2C_TXFL_OFFSET 0x1c /* I2C Tx FIFO level */ +#define LPC313X_I2C_RXB_OFFSET 0x20 /* I2C Number of bytes received */ +#define LPC313X_I2C_TXB_OFFSET 0x24 /* I2C Number of bytes transmitted */ +#define LPC313X_I2C_STX_OFFSET 0x28 /* Slave Transmit FIFO */ +#define LPC313X_I2C_STXFL_OFFSET 0x2c /* Slave Transmit FIFO level */ + +/* I2C register (virtual) addresses *************************************************************/ + +#define LPC313X_I2C0_RX (LPC313X_I2C0_VBASE+LPC313X_I2C_RX_OFFSET) +#define LPC313X_I2C0_TX (LPC313X_I2C0_VBASE+LPC313X_I2C_TX_OFFSET) +#define LPC313X_I2C0_STAT (LPC313X_I2C0_VBASE+LPC313X_I2C_STAT_OFFSET) +#define LPC313X_I2C0_CTRL (LPC313X_I2C0_VBASE+LPC313X_I2C_CTRL_OFFSET) +#define LPC313X_I2C0_CLKHI (LPC313X_I2C0_VBASE+LPC313X_I2C_CLKHI_OFFSET) +#define LPC313X_I2C0_CLKLO (LPC313X_I2C0_VBASE+LPC313X_I2C_CLKLO_OFFSET) +#define LPC313X_I2C0_ADR (LPC313X_I2C0_VBASE+LPC313X_I2C_ADR_OFFSET) +#define LPC313X_I2C0_RXFL (LPC313X_I2C0_VBASE+LPC313X_I2C_RXFL_OFFSET) +#define LPC313X_I2C0_TXFL (LPC313X_I2C0_VBASE+LPC313X_I2C_TXFL_OFFSET) +#define LPC313X_I2C0_RXB (LPC313X_I2C0_VBASE+LPC313X_I2C_RXB_OFFSET) +#define LPC313X_I2C0_TXB (LPC313X_I2C0_VBASE+LPC313X_I2C_TXB_OFFSET) +#define LPC313X_I2C0_STX (LPC313X_I2C0_VBASE+LPC313X_I2C_STX_OFFSET) +#define LPC313X_I2C0_STXFL (LPC313X_I2C0_VBASE+LPC313X_I2C_STXFL_OFFSET) + +#define LPC313X_I2C1_RX (LPC313X_I2C1_VBASE+LPC313X_I2C_RX_OFFSET) +#define LPC313X_I2C1_TX (LPC313X_I2C1_VBASE+LPC313X_I2C_TX_OFFSET) +#define LPC313X_I2C1_STAT (LPC313X_I2C1_VBASE+LPC313X_I2C_STAT_OFFSET) +#define LPC313X_I2C1_CTRL (LPC313X_I2C1_VBASE+LPC313X_I2C_CTRL_OFFSET) +#define LPC313X_I2C1_CLKHI (LPC313X_I2C1_VBASE+LPC313X_I2C_CLKHI_OFFSET) +#define LPC313X_I2C1_CLKLO (LPC313X_I2C1_VBASE+LPC313X_I2C_CLKLO_OFFSET) +#define LPC313X_I2C1_ADR (LPC313X_I2C1_VBASE+LPC313X_I2C_ADR_OFFSET) +#define LPC313X_I2C1_RXFL (LPC313X_I2C1_VBASE+LPC313X_I2C_RXFL_OFFSET) +#define LPC313X_I2C1_TXFL (LPC313X_I2C1_VBASE+LPC313X_I2C_TXFL_OFFSET) +#define LPC313X_I2C1_RXB (LPC313X_I2C1_VBASE+LPC313X_I2C_RXB_OFFSET) +#define LPC313X_I2C1_TXB (LPC313X_I2C1_VBASE+LPC313X_I2C_TXB_OFFSET) +#define LPC313X_I2C1_STX (LPC313X_I2C1_VBASE+LPC313X_I2C_STX_OFFSET) +#define LPC313X_I2C1_STXFL (LPC313X_I2C1_VBASE+LPC313X_I2C_STXFL_OFFSET) + +/* I2C register bit definitions *****************************************************************/ + +/* I2Cn RX Data FIFO I2C0_RX, address 0x1300a000, I2C1_RX, address 0x1300a400 */ + +#define I2C_RX_DATA_SHIFT (0) /* Bits 0-7: RxData Receive FIFO data bits */ +#define I2C_RX_DATA_MASK (0xff << I2C_RX_DATA_HIFT) + +/* I2Cn TX Data FIFO I2C0_TX, 0x1300a000, I2C1_TX, address 0x1300a400 */ + +#define I2C_TX_STOP (1 << 9) /* Bit 9: Issue STOP condition after transmitting byte */ +#define I2C_TX_START (1 << 8) /* Bit 8: Issue START condition before transmitting byte */ +#define I2C_TX_DATA_SHIFT (0) /* Bits 0-7: TxData Transmit FIFO data bits */ +#define I2C_TX_DATA_MASK (0xff << I2C_TX_DATA_SHIFT) + +/* I2Cn Status register I2C0_STAT, address 0x1300a004, I2C1_STAT, address 0x1300a404 */ + +#define I2C_STAT_TFES (1 << 13) /* Bit 13: Slave Transmit FIFO Empty */ +#define I2C_STAT_TFFS (1 << 12) /* Bit 12: Slave Transmit FIFO Full */ +#define I2C_STAT_TFE (1 << 11) /* Bit 11: Transmit FIFO Empty */ +#define I2C_STAT_TFF (1 << 10) /* Bit 10: Transmit FIFO Full */ +#define I2C_STAT_RFE (1 << 9) /* Bit 9: Receive FIFO Empty */ +#define I2C_STAT_RFF (1 << 8) /* Bit 8: Receive FIFO Full */ +#define I2C_STAT_SDA (1 << 7) /* Bit 7: The current value of the SDA signal */ +#define I2C_STAT_SCL (1 << 6) /* Bit 6: The current value of the SCL signal */ +#define I2C_STAT_ACTIVE (1 << 5) /* Bit 5: Indicates whether the bus is busy */ +#define I2C_STAT_DRSI (1 << 4) /* Bit 4: Slave Data Request Interrupt */ +#define I2C_STAT_DRMI (1 << 3) /* Bit 3: Master Data Request Interrupt */ +#define I2C_STAT_NAI (1 << 2) /* Bit 2: No Acknowledge Interrupt */ +#define I2C_STAT_AFI (1 << 1) /* Bit 1: Arbitration Failure Interrupt */ +#define I2C_STAT_TDI (1 << 0) /* Bit 0: Transaction Done Interrupt */ + +/* I2Cn Control register I2C0_CTRL, address 0x1300a008, I2C1_CTRL, address 0x1300a408 */ + +#define I2C_CTRL_TFFSIE (1 << 10) /* Bit 10: Slave Transmit FIFO Not Full Interrupt Enable */ +#define I2C_CTRL_SEVEN (1 << 9) /* Bit 9: Seven-bit slave address */ +#define I2C_CTRL_RESET (1 << 8) /* Bit 8: Soft Reset */ +#define I2C_CTRL_TFFIE (1 << 7) /* Bit 7: Transmit FIFO Not Full Interrupt Enable */ +#define I2C_CTRL_RFDAIE (1 << 6) /* Bit 6: Receive FIFO Data Available Interrupt Enable */ +#define I2C_CTRL_RFFIE (1 << 5) /* Bit 5: Receive FIFO Full Interrupt Enable */ +#define I2C_CTRL_DRSIE (1 << 4) /* Bit 4: Data Request Slave Transmitter Interrupt Enable */ +#define I2C_CTRL_DRMIE (1 << 3) /* Bit 3: Data Request Master Transmitter Interrupt Enable */ +#define I2C_CTRL_NAIE (1 << 2) /* Bit 2: Transmitter No Acknowledge Interrupt Enable */ +#define I2C_CTRL_AFIE (1 << 1) /* Bit 1: Transmitter Arbitration Failure Interrupt Enable */ +#define I2C_CTRL_TDIE (1 << 0) /* Bit 0: Transmit Done Interrupt Enable */ + +/* I2Cn Clock Divider High I2C0_CLKHI, address 0x1300a00c, I2C1_CLKHI, address 0x1300a40c */ + +#define I2C_CLKHI_SHIFT (0) /* Bits 0-9: Clock Divisor High */ +#define I2C_CLKHI_MASK (0x3ff << I2C_CLKHI_SHIFT) + +/* I2Cn Clock Divider Low I2C0_CLKLO, address 0x1300a010, I2C1_CLKLO, address 0x1300a410 */ + +#define I2C_CLKLO_SHIFT (0) /* Bits 0-9: Clock Divisor Low */ +#define I2C_CLKLO_MASK (0x3ff << I2C_CLKLO_SHIFT) + + +/* I2Cn Slave Addres I2C0_ADDR, address 0x1300a014, I2C1_ADDR, address 0x1300a414 */ + +#define I2C_ADR_SHIFT (0) /* Bits 0-9: I2C bus slave address */ +#define I2C_ADR_MASK (0x3ff << I2C_ADR_SHIFT) + +/* I2Cn RX FIFO level I2C0_RXFL, address 0x1300a018, I2C1_RXFL, address 0x1300a018 */ + +#define I2C_RXFL_SHIFT (0) /* Bits 0-1: Receive FIFO level */ +#define I2C_RXFL_MASK (3 << I2C_RXFL_SHIFT) + +/* I2Cn TX FIFO level I2C0_TXFL, address 0x1300a01c, I2C1_TXFL, address 0x1300a01c */ + +#define I2C_TXFL_SHIFT (0) /* Bits 0-1: Receive FIFO level */ +#define I2C_TXFL_MASK (3 << I2C_TXFL_SHIFT) + +/* I2Cn RX byte count I2C0_RXB, address 0x1300a020, I2C1_RXB, address 0x1300a420 */ + +#define I2C_RXB_SHIFT (0) /* Bits 0-15: Number of bytes received */ +#define I2C_RXB_MASK (0xffff << I2C_RXB_SHIFT) + +/* I2Cn TX byte count I2C0_TXB, address 0x1300a024, I2C1_TXB, address 0x1300a424 */ + +#define I2C_TXB_SHIFT (0) /* Bits 0-15: Number of bytes sent */ +#define I2C_TXB_MASK (0xffff << I2C_TXB_SHIFT) + +/* I2Cn Slave TX Data FIFO I2C0_STX, address 0x1300a028, I2C1_STX, 0x1300a428 */ + +#define I2C_STX_SHIFT (0) /* Bits 0-7: Slave Transmit FIFO data */ +#define I2C_STX_MASK (0xff << I2C_STX_SHIFT) + +/* I2Cn Slave TX FIFO level I2C0_STXFL, address 0x1300a02c, I2C1_STXFL, address 0x1300a42c */ + +#define I2C_STXFL_SHIFT (0) /* Bits 0-1: Slave Transmit FIFO level */ +#define I2C_STXFL_MASK (3 << I2C_STXFL_SHIFT) + +/************************************************************************************************ + * Public Types + ************************************************************************************************/ + +/************************************************************************************************ + * Public Data + ************************************************************************************************/ + +/************************************************************************************************ + * Public Functions + ************************************************************************************************/ + +#endif /* __ARCH_ARM_SRC_LPC313X_I2C_H */