sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Additional support needed for Zmodem debug

Browse Source
This commit is contained in:
Gregory Nutt 2013-07-12 18:10:12 -06:00
parent bd3ea6e8ad
commit e5aa6acc0b
2 changed files with 21 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

22
configs/olimex-lpc1766stk/README.txt
View File

@ -1082,10 +1082,28 @@ Where <subdir> is one of the following:
CONFIG_UART1_PARITY=0
CONFIG_UART1_2STOP=0
2. Support is included for the NuttX sz and rz commands.
2. Support is included for the NuttX sz and rz commands. In order to
use these commands, you will need to mount the SD card so that you
will have a file system to transfer files in and out of:
nsh> mount -t vfat /dev/mmcds0 /mnt/sdcard
NOTE: You must use the mountpoint /mnt/sdcard because that is the
Zmodem sandbox specified in the configuration.
CONFIG_SYSTEM_ZMODEM_MOUNTPOINT="/mnt/sdcard"
Hmmm.. I probably should set up an NSH script to just mount /dev/mmcsd0
at /mnt/sdcard each time the board boots.
This program has been verified against the rzsz programs running on a
Linux PC. To send a file to the PC, first start rz on the Linux host:
Linux PC. To send a file to the PC, first make sure that the serial
port is configured to work with the board:
$ sudo stty -F /dev/ttyS0 57600
$ sudo stty -F /dev/ttyS0
start rz on the Linux host:
$ sudo rz </dev/ttyS0 >/dev/ttyS0

2
configs/olimex-lpc1766stk/zmodem/defconfig
View File

@ -796,7 +796,7 @@ CONFIG_SYSTEM_ZMODEM=y
CONFIG_SYSTEM_ZMODEM_RCVBUFSIZE=512
CONFIG_SYSTEM_ZMODEM_PKTBUFSIZE=512
CONFIG_SYSTEM_ZMODEM_SNDBUFSIZE=512
CONFIG_SYSTEM_ZMODEM_MOUNTPOINT="/tmp"
CONFIG_SYSTEM_ZMODEM_MOUNTPOINT="/mnt/sdcard"
CONFIG_SYSTEM_ZMODEM_SENDSAMPLE=y
CONFIG_SYSTEM_ZMODEM_SENDATTN=y
CONFIG_SYSTEM_ZMODEM_ALWAYSSINT=y