sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

s32k1xx:serial:Fix selection of RTS to iflow

Browse Source
This commit is contained in:
David Sidrane 2022-12-19 06:34:24 -08:00 committed by Xiang Xiao
parent 033adeced4
commit e89e7eab8d
1 changed files with 5 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
arch/arm/src/s32k1xx/s32k1xx_serial.c
View File

@ -862,15 +862,15 @@ static int s32k1xx_setup(struct uart_dev_s *dev)
config.parity = priv->parity; /* 0=none, 1=odd, 2=even */ config.parity = priv->parity; /* 0=none, 1=odd, 2=even */
config.bits = priv->bits; /* Number of bits (5-9) */ config.bits = priv->bits; /* Number of bits (5-9) */
config.stopbits2 = priv->stopbits2; /* true: Configure with 2 stop bits instead of 1 */ config.stopbits2 = priv->stopbits2; /* true: Configure with 2 stop bits instead of 1 */
#ifdef CONFIG_SERIAL_IFLOWCONTROL
config.usects = priv->iflow; /* Flow control on inbound side */
#endif
#ifdef CONFIG_SERIAL_OFLOWCONTROL #ifdef CONFIG_SERIAL_OFLOWCONTROL
/* Flow control on outbound side if not GPIO based */ config.usects = priv->oflow; /* Flow control on outbound side */
#endif
#ifdef CONFIG_SERIAL_IFLOWCONTROL
/* Flow control on inbound side if not GPIO based */
if ((priv->rts_gpio & _PIN_MODE_MASK) != _PIN_MODE_GPIO) if ((priv->rts_gpio & _PIN_MODE_MASK) != _PIN_MODE_GPIO)
{ {
config.userts = priv->oflow; config.userts = priv->iflow;
} }
#endif #endif