sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

STM32F7: serial: disallow broken configuration combination of CONFIG_STM32F7_FLOWCONTROL_BROKEN=y and CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS not set.

Browse Source
This commit is contained in:
Jussi Kivilinna 2017-04-11 06:39:27 -06:00 committed by Gregory Nutt
parent 4f35f196b1
commit e9a8dc7c6e
2 changed files with 39 additions and 26 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
arch/arm/src/stm32f7/Kconfig
View File

@ -1634,7 +1634,7 @@ config SERIAL_DISABLE_REORDERING
config STM32F7_FLOWCONTROL_BROKEN
bool "Use Software UART RTS flow control"
depends on STM32F7_USART
depends on STM32F7_USART && SERIAL_IFLOWCONTROL_WATERMARKS
default n
---help---
Enable UART RTS flow control using Software. Because STM

63
arch/arm/src/stm32f7/stm32_serial.c
View File

@ -220,43 +220,56 @@
/* Warnings for potentially unsafe configuration combinations. */
#if defined(CONFIG_STM32F7_FLOWCONTROL_BROKEN) && \
!defined(CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS)
# error "CONFIG_STM32F7_FLOWCONTROL_BROKEN requires \
CONFIG_SERIAL_IFLOWCONTROL_WATERMARKS to be enabled."
#endif
#ifndef CONFIG_STM32F7_FLOWCONTROL_BROKEN
/* Combination of RXDMA + IFLOWCONTROL does not work as one might expect.
* Since RXDMA uses circular DMA-buffer, DMA will always keep reading new
* data from USART peripheral even if DMA buffer underruns. Thus this
* combination only does following: RTS is asserted on USART setup and
* deasserted on shutdown and does not perform actual RTS flow-control.
*
* With SW flow-control, RTS is asserted before UART receive buffer fully
* fills, thus preventing data loss if application is slow to process data
* from serial device node. However, if RxDMA interrupt is blocked for too
* long, data loss is still possible as SW flow-control would also be
* blocked.
*/
#if defined(CONFIG_USART1_RXDMA) && defined(CONFIG_USART1_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART1. \
This combination can lead to data loss."
#endif
# if defined(CONFIG_USART1_RXDMA) && defined(CONFIG_USART1_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART1. \
This combination can lead to data loss."
# endif
#if defined(CONFIG_USART2_RXDMA) && defined(CONFIG_USART2_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART2. \
This combination can lead to data loss."
#endif
# if defined(CONFIG_USART2_RXDMA) && defined(CONFIG_USART2_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART2. \
This combination can lead to data loss."
# endif
#if defined(CONFIG_USART3_RXDMA) && defined(CONFIG_USART3_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART3. \
This combination can lead to data loss."
#endif
# if defined(CONFIG_USART3_RXDMA) && defined(CONFIG_USART3_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART3. \
This combination can lead to data loss."
# endif
#if defined(CONFIG_USART6_RXDMA) && defined(CONFIG_USART6_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART6. \
This combination can lead to data loss."
#endif
# if defined(CONFIG_USART6_RXDMA) && defined(CONFIG_USART6_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for USART6. \
This combination can lead to data loss."
# endif
#if defined(CONFIG_UART7_RXDMA) && defined(CONFIG_UART7_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for UART7. \
This combination can lead to data loss."
#endif
#if defined(CONFIG_UART8_RXDMA) && defined(CONFIG_UART8_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for UART8. \
This combination can lead to data loss."
#endif
# if defined(CONFIG_UART7_RXDMA) && defined(CONFIG_UART7_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for UART7. \
This combination can lead to data loss."
# endif
# if defined(CONFIG_UART8_RXDMA) && defined(CONFIG_UART8_IFLOWCONTROL)
# warning "RXDMA and IFLOWCONTROL both enabled for UART8. \
This combination can lead to data loss."
# endif
#endif /* CONFIG_STM32F7_FLOWCONTROL_BROKEN */
/****************************************************************************
* Private Types