Move SAM3U header files to arch/arm/src/sam3u/chip. Some renaming of SAM3U to SAM to ssupport SAM4. Convert all configs/sam3u-ek configurations to use the kconfig-frontends tool
This commit is contained in:
Gregory Nutt
parent
b8be2d909f
commit
ea73fceb34
@ -41,12 +41,12 @@ GNU Toolchain Options
|
||||
add one of the following configuration options to your .config (or defconfig)
|
||||
file:
|
||||
|
||||
CONFIG_SAM3U_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_SAM3U_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_SAM3U_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_SAM3U_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
CONFIG_SAM34_CODESOURCERYW=y : CodeSourcery under Windows
|
||||
CONFIG_SAM34_CODESOURCERYL=y : CodeSourcery under Linux
|
||||
CONFIG_SAM34_DEVKITARM=y : devkitARM under Windows
|
||||
CONFIG_SAM34_BUILDROOT=y : NuttX buildroot under Linux or Cygwin (default)
|
||||
|
||||
If you are not using CONFIG_SAM3U_BUILDROOT, then you may also have to modify
|
||||
If you are not using CONFIG_SAM34_BUILDROOT, then you may also have to modify
|
||||
the PATH in the setenv.h file if your make cannot find the tools.
|
||||
|
||||
NOTE: the CodeSourcery (for Windows), devkitARM, and Raisonance toolchains are
|
||||
@ -311,15 +311,15 @@ SAM3U-EK-specific Configuration Options
|
||||
|
||||
Individual subsystems can be enabled:
|
||||
|
||||
CONFIG_SAM3U_DMA
|
||||
CONFIG_SAM3U_HSMCI
|
||||
CONFIG_SAM3U_NAND
|
||||
CONFIG_SAM3U_SPI
|
||||
CONFIG_SAM3U_UART
|
||||
CONFIG_SAM3U_USART0
|
||||
CONFIG_SAM3U_USART1
|
||||
CONFIG_SAM3U_USART2
|
||||
CONFIG_SAM3U_USART3
|
||||
CONFIG_SAM34_DMA
|
||||
CONFIG_SAM34_HSMCI
|
||||
CONFIG_SAM34_NAND
|
||||
CONFIG_SAM34_SPI
|
||||
CONFIG_SAM34_UART
|
||||
CONFIG_SAM34_USART0
|
||||
CONFIG_SAM34_USART1
|
||||
CONFIG_SAM34_USART2
|
||||
CONFIG_SAM34_USART3
|
||||
|
||||
Some subsystems can be configured to operate in different ways. The drivers
|
||||
need to know how to configure the subsystem.
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3u-ek/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -82,10 +82,10 @@
|
||||
|
||||
/* Resulting frequencies */
|
||||
|
||||
#define SAM3U_MAINOSC_FREQUENCY (12000000)
|
||||
#define SAM3U_MCK_FREQUENCY (48000000)
|
||||
#define SAM3U_PLLA_FREQUENCY (96000000)
|
||||
#define SAM3U_CPU_FREQUENCY (48000000)
|
||||
#define SAM_MAINOSC_FREQUENCY (12000000)
|
||||
#define SAM_MCK_FREQUENCY (48000000)
|
||||
#define SAM_PLLA_FREQUENCY (96000000)
|
||||
#define SAM_CPU_FREQUENCY (48000000)
|
||||
|
||||
/* HSMCI clocking
|
||||
*
|
||||
@ -97,12 +97,12 @@
|
||||
*/
|
||||
|
||||
/* MCK = 48MHz, CLKDIV = 59, MCI_SPEED = 48MHz / 2 * (59+1) = 400 KHz */
|
||||
|
||||
|
||||
#define HSMCI_INIT_CLKDIV (59 << HSMCI_MR_CLKDIV_SHIFT)
|
||||
|
||||
/* MCK = 48MHz, CLKDIV = 1, MCI_SPEED = 48MHz / 2 * (1+1) = 12 MHz */
|
||||
|
||||
#define HSMCI_MMCXFR_CLKDIV (3 << HSMCI_MR_CLKDIV_SHIFT)
|
||||
#define HSMCI_MMCXFR_CLKDIV (3 << HSMCI_MR_CLKDIV_SHIFT)
|
||||
|
||||
/* MCK = 48MHz, CLKDIV = 0, MCI_SPEED = 48MHz / 2 * (0+1) = 24 MHz */
|
||||
|
||||
|
||||
55
configs/sam3u-ek/knsh/defconfig
Executable file → Normal file
55
configs/sam3u-ek/knsh/defconfig
Executable file → Normal file
@ -70,6 +70,7 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
@ -77,7 +78,7 @@ CONFIG_ARCH="arm"
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
CONFIG_ARCH_CHIP_SAM3U=y
|
||||
CONFIG_ARCH_CHIP_SAM34=y
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
@ -86,6 +87,7 @@ CONFIG_ARCH_CHIP="sam3u"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
CONFIG_ARMV7M_MPU=y
|
||||
CONFIG_ARMV7M_MPU_NREGIONS=8
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
@ -99,21 +101,22 @@ CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||
# CONFIG_SDIO_WIDTH_D1_ONLY is not set
|
||||
|
||||
#
|
||||
# AT91SAM3 Configuration Options
|
||||
# AT91SAM3/SAM4 Configuration Options
|
||||
#
|
||||
CONFIG_ARCH_CHIP_AT91SAM3U4E=y
|
||||
CONFIG_ARCH_CHIP_SAM3U=y
|
||||
|
||||
#
|
||||
# AT91SAM3 Peripheral Support
|
||||
#
|
||||
# CONFIG_SAM3U_DMA is not set
|
||||
# CONFIG_SAM3U_NAND is not set
|
||||
# CONFIG_SAM3U_HSMCI is not set
|
||||
CONFIG_SAM3U_UART=y
|
||||
# CONFIG_SAM3U_USART0 is not set
|
||||
# CONFIG_SAM3U_USART1 is not set
|
||||
# CONFIG_SAM3U_USART2 is not set
|
||||
# CONFIG_SAM3U_USART3 is not set
|
||||
# CONFIG_SAM34_DMA is not set
|
||||
# CONFIG_SAM34_NAND is not set
|
||||
# CONFIG_SAM34_HSMCI is not set
|
||||
CONFIG_SAM34_UART=y
|
||||
# CONFIG_SAM34_USART0 is not set
|
||||
# CONFIG_SAM34_USART1 is not set
|
||||
# CONFIG_SAM34_USART2 is not set
|
||||
# CONFIG_SAM34_USART3 is not set
|
||||
|
||||
#
|
||||
# AT91SAM3 UART Configuration
|
||||
@ -143,6 +146,8 @@ CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
@ -249,7 +254,12 @@ CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# System call configuration
|
||||
#
|
||||
CONFIG_SYS_RESERVED=8
|
||||
CONFIG_SYS_NNEST=2
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
@ -266,6 +276,7 @@ CONFIG_DEV_NULL=y
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
@ -283,7 +294,6 @@ CONFIG_SDIO_BLOCKSETUP=y
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
# CONFIG_SERCOMM_CONSOLE is not set
|
||||
CONFIG_SERIAL=y
|
||||
# CONFIG_DEV_LOWCONSOLE is not set
|
||||
# CONFIG_16550_UART is not set
|
||||
@ -336,6 +346,7 @@ CONFIG_FS_FAT=y
|
||||
# CONFIG_FAT_DMAMEMORY is not set
|
||||
# CONFIG_FS_NXFFS is not set
|
||||
# CONFIG_FS_ROMFS is not set
|
||||
# CONFIG_FS_SMARTFS is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
@ -358,6 +369,11 @@ CONFIG_MM_KERNEL_HEAPSIZE=8192
|
||||
CONFIG_MM_REGIONS=3
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
@ -383,6 +399,7 @@ CONFIG_LIB_HOMEDIR="/"
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
@ -408,6 +425,7 @@ CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||
# CONFIG_SCHED_LPWORK is not set
|
||||
# CONFIG_SCHED_USRWORK is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
@ -441,8 +459,9 @@ CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
@ -463,6 +482,9 @@ CONFIG_EXAMPLES_NSH=y
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
@ -558,6 +580,11 @@ CONFIG_NSH_DISABLE_PS=y
|
||||
# CONFIG_NSH_DISABLE_USLEEP is not set
|
||||
# CONFIG_NSH_DISABLE_WGET is not set
|
||||
# CONFIG_NSH_DISABLE_XD is not set
|
||||
|
||||
#
|
||||
# Configure Command Options
|
||||
#
|
||||
# CONFIG_NSH_CMDOPT_DF_H is not set
|
||||
CONFIG_NSH_CODECS_BUFSIZE=128
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_LINELEN=64
|
||||
@ -594,6 +621,10 @@ CONFIG_NSH_CONSOLE=y
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
|
||||
@ -1,44 +0,0 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/nsh/appconfig
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nsh
|
||||
|
||||
# The NSH library
|
||||
|
||||
CONFIGURED_APPS += system/readline
|
||||
CONFIGURED_APPS += nshlib
|
||||
|
||||
989
configs/sam3u-ek/nsh/defconfig
Executable file → Normal file
989
configs/sam3u-ek/nsh/defconfig
Executable file → Normal file
File diff suppressed because it is too large
Load Diff
@ -1,39 +0,0 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/nx/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nx
|
||||
|
||||
898
configs/sam3u-ek/nx/defconfig
Executable file → Normal file
898
configs/sam3u-ek/nx/defconfig
Executable file → Normal file
File diff suppressed because it is too large
Load Diff
@ -1,39 +0,0 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/ostest/appconfig
|
||||
#
|
||||
# Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/ostest
|
||||
|
||||
919
configs/sam3u-ek/ostest/defconfig
Executable file → Normal file
919
configs/sam3u-ek/ostest/defconfig
Executable file → Normal file
@ -1,224 +1,225 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/ostest/defconfig
|
||||
#
|
||||
# Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
# Automatically generated file; DO NOT EDIT.
|
||||
# Nuttx/ Configuration
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSPIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
#
|
||||
# Architecture Selection
|
||||
#
|
||||
CONFIG_ARCH="arm"
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_CHIP="sam3u"
|
||||
CONFIG_ARCH_CHIP_AT91SAM3U4E=y
|
||||
CONFIG_ARCH_BOARD="sam3u-ek"
|
||||
CONFIG_ARCH_BOARD_SAM3UEK=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=4768
|
||||
CONFIG_DRAM_SIZE=32768
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARCH_BOOTLOADER=n
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_BUTTONS=y
|
||||
CONFIG_ARCH_CALIBRATION=n
|
||||
CONFIG_ARCH_DMA=n
|
||||
CONFIG_NUTTX_NEWCONFIG=y
|
||||
|
||||
#
|
||||
# Identify toolchain and linker options
|
||||
# Build Setup
|
||||
#
|
||||
CONFIG_SAM3U_CODESOURCERYW=n
|
||||
CONFIG_SAM3U_CODESOURCERYL=n
|
||||
CONFIG_SAM3U_DEVKITARM=n
|
||||
CONFIG_SAM3U_BUILDROOT=y
|
||||
# CONFIG_EXPERIMENTAL is not set
|
||||
CONFIG_HOST_LINUX=y
|
||||
# CONFIG_HOST_OSX is not set
|
||||
# CONFIG_HOST_WINDOWS is not set
|
||||
# CONFIG_HOST_OTHER is not set
|
||||
|
||||
#
|
||||
# Individual subsystems can be enabled:
|
||||
# Build Configuration
|
||||
#
|
||||
CONFIG_SAM3U_DMA=n
|
||||
CONFIG_SAM3U_NAND=n
|
||||
CONFIG_SAM3U_HSMCI=n
|
||||
CONFIG_SAM3U_UART=y
|
||||
CONFIG_SAM3U_USART0=n
|
||||
CONFIG_SAM3U_USART1=n
|
||||
CONFIG_SAM3U_USART2=n
|
||||
CONFIG_SAM3U_USART3=n
|
||||
CONFIG_SAM3U_NAND=n
|
||||
# CONFIG_APPS_DIR="../apps"
|
||||
# CONFIG_BUILD_2PASS is not set
|
||||
|
||||
#
|
||||
# Some subsystems can be configured to operate in different ways..
|
||||
# The drivers need to know how to configure the subsystem.
|
||||
# Binary Output Formats
|
||||
#
|
||||
|
||||
CONFIG_GPIOA_IRQ=n
|
||||
CONFIG_GPIOB_IRQ=n
|
||||
CONFIG_GPIOC_IRQ=n
|
||||
CONFIG_USART0_ISUART=y
|
||||
CONFIG_USART1_ISUART=y
|
||||
CONFIG_USART2_ISUART=y
|
||||
CONFIG_USART3_ISUART=y
|
||||
|
||||
#
|
||||
# SAM3U specific serial device driver settings
|
||||
#
|
||||
CONFIG_UART_SERIAL_CONSOLE=Y
|
||||
CONFIG_USART0_SERIAL_CONSOLE=n
|
||||
CONFIG_USART1_SERIAL_CONSOLE=n
|
||||
CONFIG_USART2_SERIAL_CONSOLE=n
|
||||
CONFIG_USART3_SERIAL_CONSOLE=n
|
||||
|
||||
CONFIG_UART_TXBUFSIZE=256
|
||||
CONFIG_USART0_TXBUFSIZE=256
|
||||
CONFIG_USART1_TXBUFSIZE=256
|
||||
CONFIG_USART2_TXBUFSIZE=256
|
||||
CONFIG_USART3_TXBUFSIZE=256
|
||||
|
||||
CONFIG_UART_RXBUFSIZE=256
|
||||
CONFIG_USART0_RXBUFSIZE=256
|
||||
CONFIG_USART1_RXBUFSIZE=256
|
||||
CONFIG_USART2_RXBUFSIZE=256
|
||||
CONFIG_USART3_RXBUFSIZE=256
|
||||
|
||||
CONFIG_UART_BAUD=115200
|
||||
CONFIG_USART0_BAUD=115200
|
||||
CONFIG_USART1_BAUD=115200
|
||||
CONFIG_USART2_BAUD=115200
|
||||
CONFIG_USART3_BAUD=115200
|
||||
|
||||
CONFIG_UART_BITS=8
|
||||
CONFIG_USART0_BITS=8
|
||||
CONFIG_USART1_BITS=8
|
||||
CONFIG_USART2_BITS=8
|
||||
CONFIG_USART3_BITS=8
|
||||
|
||||
CONFIG_UART_PARITY=0
|
||||
CONFIG_USART0_PARITY=0
|
||||
CONFIG_USART1_PARITY=0
|
||||
CONFIG_USART2_PARITY=0
|
||||
CONFIG_USART3_PARITY=0
|
||||
|
||||
CONFIG_UART_2STOP=0
|
||||
CONFIG_USART0_2STOP=0
|
||||
CONFIG_USART1_2STOP=0
|
||||
CONFIG_USART2_2STOP=0
|
||||
CONFIG_USART3_2STOP=0
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=n
|
||||
CONFIG_MOTOROLA_SREC=n
|
||||
# CONFIG_RRLOAD_BINARY is not set
|
||||
# CONFIG_INTELHEX_BINARY is not set
|
||||
# CONFIG_MOTOROLA_SREC is not set
|
||||
CONFIG_RAW_BINARY=y
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
# Customize Header Files
|
||||
#
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_MM_REGIONS=3
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
# CONFIG_ARCH_STDBOOL_H is not set
|
||||
# CONFIG_ARCH_MATH_H is not set
|
||||
# CONFIG_ARCH_FLOAT_H is not set
|
||||
# CONFIG_ARCH_STDARG_H is not set
|
||||
|
||||
#
|
||||
# Debug Options
|
||||
#
|
||||
# CONFIG_DEBUG is not set
|
||||
# CONFIG_DEBUG_SYMBOLS is not set
|
||||
|
||||
#
|
||||
# System Type
|
||||
#
|
||||
# CONFIG_ARCH_8051 is not set
|
||||
CONFIG_ARCH_ARM=y
|
||||
# CONFIG_ARCH_AVR is not set
|
||||
# CONFIG_ARCH_HC is not set
|
||||
# CONFIG_ARCH_MIPS is not set
|
||||
# CONFIG_ARCH_RGMP is not set
|
||||
# CONFIG_ARCH_SH is not set
|
||||
# CONFIG_ARCH_SIM is not set
|
||||
# CONFIG_ARCH_X86 is not set
|
||||
# CONFIG_ARCH_Z16 is not set
|
||||
# CONFIG_ARCH_Z80 is not set
|
||||
CONFIG_ARCH="arm"
|
||||
|
||||
#
|
||||
# ARM Options
|
||||
#
|
||||
# CONFIG_ARCH_CHIP_C5471 is not set
|
||||
# CONFIG_ARCH_CHIP_CALYPSO is not set
|
||||
# CONFIG_ARCH_CHIP_DM320 is not set
|
||||
# CONFIG_ARCH_CHIP_IMX is not set
|
||||
# CONFIG_ARCH_CHIP_KINETIS is not set
|
||||
# CONFIG_ARCH_CHIP_KL is not set
|
||||
# CONFIG_ARCH_CHIP_LM is not set
|
||||
# CONFIG_ARCH_CHIP_LPC17XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC214X is not set
|
||||
# CONFIG_ARCH_CHIP_LPC2378 is not set
|
||||
# CONFIG_ARCH_CHIP_LPC31XX is not set
|
||||
# CONFIG_ARCH_CHIP_LPC43XX is not set
|
||||
# CONFIG_ARCH_CHIP_NUC1XX is not set
|
||||
CONFIG_ARCH_CHIP_SAM34=y
|
||||
# CONFIG_ARCH_CHIP_STM32 is not set
|
||||
# CONFIG_ARCH_CHIP_STR71X is not set
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_FAMILY="armv7-m"
|
||||
CONFIG_ARCH_CHIP="sam3u"
|
||||
# CONFIG_ARMV7M_USEBASEPRI is not set
|
||||
CONFIG_ARCH_HAVE_MPU=y
|
||||
# CONFIG_ARMV7M_MPU is not set
|
||||
|
||||
#
|
||||
# ARMV7M Configuration Options
|
||||
#
|
||||
CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT=y
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set
|
||||
# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABI is not set
|
||||
CONFIG_ARMV7M_OABI_TOOLCHAIN=y
|
||||
|
||||
#
|
||||
# AT91SAM3/SAM4 Configuration Options
|
||||
#
|
||||
CONFIG_ARCH_CHIP_AT91SAM3U4E=y
|
||||
CONFIG_ARCH_CHIP_SAM3U=y
|
||||
|
||||
#
|
||||
# AT91SAM3 Peripheral Support
|
||||
#
|
||||
# CONFIG_SAM34_DMA is not set
|
||||
# CONFIG_SAM34_NAND is not set
|
||||
# CONFIG_SAM34_HSMCI is not set
|
||||
CONFIG_SAM34_UART=y
|
||||
# CONFIG_SAM34_USART0 is not set
|
||||
# CONFIG_SAM34_USART1 is not set
|
||||
# CONFIG_SAM34_USART2 is not set
|
||||
# CONFIG_SAM34_USART3 is not set
|
||||
|
||||
#
|
||||
# AT91SAM3 UART Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# AT91SAM3 GPIO Interrupt Configuration
|
||||
#
|
||||
# CONFIG_GPIOA_IRQ is not set
|
||||
# CONFIG_GPIOB_IRQ is not set
|
||||
# CONFIG_GPIOC_IRQ is not set
|
||||
|
||||
#
|
||||
# External Memory Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Architecture Options
|
||||
#
|
||||
# CONFIG_ARCH_NOINTC is not set
|
||||
# CONFIG_ARCH_VECNOTIRQ is not set
|
||||
# CONFIG_ARCH_DMA is not set
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
# CONFIG_CUSTOM_STACK is not set
|
||||
# CONFIG_ADDRENV is not set
|
||||
CONFIG_ARCH_HAVE_VFORK=y
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
# CONFIG_ENDIAN_BIG is not set
|
||||
# CONFIG_ARCH_HAVE_RAMFUNCS is not set
|
||||
CONFIG_ARCH_HAVE_RAMVECTORS=y
|
||||
# CONFIG_ARCH_RAMVECTORS is not set
|
||||
|
||||
#
|
||||
# Board Settings
|
||||
#
|
||||
CONFIG_BOARD_LOOPSPERMSEC=4768
|
||||
# CONFIG_ARCH_CALIBRATION is not set
|
||||
CONFIG_DRAM_START=0x20000000
|
||||
CONFIG_DRAM_SIZE=32768
|
||||
CONFIG_ARCH_HAVE_INTERRUPTSTACK=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=0
|
||||
|
||||
#
|
||||
# Boot options
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMEXTSRAM is not set
|
||||
CONFIG_BOOT_RUNFROMFLASH=y
|
||||
# CONFIG_BOOT_RUNFROMISRAM is not set
|
||||
# CONFIG_BOOT_RUNFROMSDRAM is not set
|
||||
# CONFIG_BOOT_COPYTORAM is not set
|
||||
|
||||
#
|
||||
# Board Selection
|
||||
#
|
||||
CONFIG_ARCH_BOARD_SAM3UEK=y
|
||||
# CONFIG_ARCH_BOARD_CUSTOM is not set
|
||||
CONFIG_ARCH_BOARD="sam3u-ek"
|
||||
|
||||
#
|
||||
# Common Board Options
|
||||
#
|
||||
CONFIG_ARCH_HAVE_LEDS=y
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_HAVE_BUTTONS=y
|
||||
CONFIG_ARCH_BUTTONS=y
|
||||
CONFIG_ARCH_HAVE_IRQBUTTONS=y
|
||||
# CONFIG_ARCH_IRQBUTTONS is not set
|
||||
|
||||
#
|
||||
# Board-Specific Options
|
||||
#
|
||||
|
||||
#
|
||||
# RTOS Features
|
||||
#
|
||||
# CONFIG_BOARD_INITIALIZE is not set
|
||||
CONFIG_MSEC_PER_TICK=10
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
# CONFIG_SCHED_INSTRUMENTATION is not set
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
# CONFIG_SCHED_HAVE_PARENT is not set
|
||||
# CONFIG_JULIAN_TIME is not set
|
||||
CONFIG_START_YEAR=2009
|
||||
CONFIG_START_MONTH=9
|
||||
CONFIG_START_DAY=21
|
||||
CONFIG_GREGORIAN_TIME=n
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
CONFIG_MUTEX_TYPES=n
|
||||
CONFIG_PRIORITY_INHERITANCE=n
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=0
|
||||
CONFIG_FDCLONE_DISABLE=n
|
||||
CONFIG_FDCLONE_STDIO=n
|
||||
# CONFIG_MUTEX_TYPES is not set
|
||||
# CONFIG_PRIORITY_INHERITANCE is not set
|
||||
# CONFIG_FDCLONE_DISABLE is not set
|
||||
# CONFIG_FDCLONE_STDIO is not set
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_NXFLAT=n
|
||||
CONFIG_SCHED_WORKQUEUE=n
|
||||
CONFIG_SCHED_WORKPRIORITY=192
|
||||
CONFIG_SCHED_WORKPERIOD=50000
|
||||
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||
CONFIG_SIG_SIGWORK=17
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
CONFIG_DISABLE_CLOCK=n
|
||||
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||
CONFIG_DISABLE_PTHREAD=n
|
||||
CONFIG_DISABLE_SIGNALS=n
|
||||
CONFIG_DISABLE_MQUEUE=n
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
# CONFIG_SCHED_WAITPID is not set
|
||||
# CONFIG_SCHED_STARTHOOK is not set
|
||||
# CONFIG_SCHED_ATEXIT is not set
|
||||
# CONFIG_SCHED_ONEXIT is not set
|
||||
CONFIG_USER_ENTRYPOINT="ostest_main"
|
||||
CONFIG_DISABLE_OS_API=y
|
||||
# CONFIG_DISABLE_CLOCK is not set
|
||||
# CONFIG_DISABLE_POSIX_TIMERS is not set
|
||||
# CONFIG_DISABLE_PTHREAD is not set
|
||||
# CONFIG_DISABLE_SIGNALS is not set
|
||||
# CONFIG_DISABLE_MQUEUE is not set
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
# Signal Numbers
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve system performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_STRNLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
CONFIG_SIG_SIGUSR1=1
|
||||
CONFIG_SIG_SIGUSR2=2
|
||||
CONFIG_SIG_SIGALARM=3
|
||||
CONFIG_SIG_SIGCONDTIMEDOUT=16
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
@ -229,233 +230,327 @@ CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Filesystem configuration
|
||||
#
|
||||
CONFIG_FS_FAT=n
|
||||
CONFIG_FS_ROMFS=n
|
||||
|
||||
#
|
||||
# Maintain legacy build behavior (revisit)
|
||||
#
|
||||
|
||||
CONFIG_MMCSD=y
|
||||
CONFIG_MMCSD_SPI=y
|
||||
CONFIG_MMCSD_SDIO=y
|
||||
CONFIG_MTD=y
|
||||
|
||||
#
|
||||
# SPI-based MMC/SD driver
|
||||
#
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
CONFIG_MMCSD_READONLY=n
|
||||
CONFIG_MMCSD_SPICLOCK=12500000
|
||||
|
||||
#
|
||||
# Block driver buffering
|
||||
#
|
||||
CONFIG_FS_READAHEAD=n
|
||||
CONFIG_FS_WRITEBUFFER=n
|
||||
|
||||
#
|
||||
# SDIO-based MMC/SD driver
|
||||
#
|
||||
CONFIG_SDIO_DMA=n
|
||||
CONFIG_MMCSD_MMCSUPPORT=n
|
||||
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
#
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=n
|
||||
CONFIG_NET_TCP_CONNS=40
|
||||
CONFIG_NET_MAX_LISTENPORTS=40
|
||||
CONFIG_NET_UDP=n
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=10
|
||||
CONFIG_NET_ICMP=n
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
#
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
CONFIG_USBDEV=n
|
||||
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||
CONFIG_USBDEV_DUALSPEED=n
|
||||
CONFIG_USBDEV_SELFPOWERED=y
|
||||
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||
CONFIG_USBDEV_MAXPOWER=100
|
||||
CONFIG_USBDEV_TRACE=n
|
||||
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||
|
||||
#
|
||||
# USB Serial Device Configuration
|
||||
#
|
||||
CONFIG_PL2303=n
|
||||
CONFIG_PL2303_EPINTIN=1
|
||||
CONFIG_PL2303_EPBULKOUT=2
|
||||
CONFIG_PL2303_EPBULKIN=3
|
||||
CONFIG_PL2303_NWRREQS=4
|
||||
CONFIG_PL2303_NRDREQS=4
|
||||
CONFIG_PL2303_VENDORID=0x067b
|
||||
CONFIG_PL2303_PRODUCTID=0x2303
|
||||
CONFIG_PL2303_VENDORSTR="Nuttx"
|
||||
CONFIG_PL2303_PRODUCTSTR="USBdev Serial"
|
||||
CONFIG_PL2303_RXBUFSIZE=512
|
||||
CONFIG_PL2303_TXBUFSIZE=512
|
||||
|
||||
#
|
||||
# USB Storage Device Configuration
|
||||
#
|
||||
CONFIG_USBMSC=n
|
||||
CONFIG_USBMSC_EP0MAXPACKET=64
|
||||
CONFIG_USBMSC_EPBULKOUT=2
|
||||
CONFIG_USBMSC_EPBULKIN=5
|
||||
CONFIG_USBMSC_NRDREQS=2
|
||||
CONFIG_USBMSC_NWRREQS=2
|
||||
CONFIG_USBMSC_BULKINREQLEN=256
|
||||
CONFIG_USBMSC_BULKOUTREQLEN=256
|
||||
CONFIG_USBMSC_VENDORID=0x584e
|
||||
CONFIG_USBMSC_VENDORSTR="NuttX"
|
||||
CONFIG_USBMSC_PRODUCTID=0x5342
|
||||
CONFIG_USBMSC_PRODUCTSTR="USBdev Storage"
|
||||
CONFIG_USBMSC_VERSIONNO=0x0399
|
||||
CONFIG_USBMSC_REMOVABLE=y
|
||||
|
||||
#
|
||||
# Graphics related configuration settings
|
||||
#
|
||||
CONFIG_NX=n
|
||||
CONFIG_NX_MULTIUSER=n
|
||||
CONFIG_NX_NPLANES=1
|
||||
CONFIG_NX_DISABLE_1BPP=y
|
||||
CONFIG_NX_DISABLE_2BPP=y
|
||||
CONFIG_NX_DISABLE_4BPP=y
|
||||
CONFIG_NX_DISABLE_8BPP=y
|
||||
CONFIG_NX_DISABLE_16BPP=n
|
||||
CONFIG_NX_DISABLE_24BPP=y
|
||||
CONFIG_NX_DISABLE_32BPP=y
|
||||
CONFIG_NX_PACKEDMSFIRST=n
|
||||
CONFIG_NX_LCDDRIVER=y
|
||||
CONFIG_LCD_MAXPOWER=31
|
||||
CONFIG_LCD_MAXCONTRAST=1
|
||||
CONFIG_NX_MOUSE=y
|
||||
CONFIG_NX_KBD=y
|
||||
#CONFIG_NXTK_BORDERWIDTH=4
|
||||
#CONFIG_NXTK_BORDERCOLOR1
|
||||
#CONFIG_NXTK_BORDERCOLOR2
|
||||
CONFIG_NXTK_AUTORAISE=n
|
||||
CONFIG_NXFONT_SANS=y
|
||||
CONFIG_NXFONTS_CHARBITS=7
|
||||
CONFIG_NX_BLOCKING=y
|
||||
CONFIG_NX_MXSERVERMSGS=32
|
||||
CONFIG_NX_MXCLIENTMSGS=16
|
||||
|
||||
#
|
||||
# Settings for examples/uip
|
||||
#
|
||||
CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00
|
||||
CONFIG_EXAMPLES_UIP_DHCPC=n
|
||||
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
CONFIG_EXAMPLES_NETTEST_SERVER=n
|
||||
CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n
|
||||
CONFIG_EXAMPLES_NETTEST_NOMAC=n
|
||||
CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002
|
||||
CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001
|
||||
CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00
|
||||
CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001
|
||||
|
||||
#
|
||||
# Settings for examples/ostest
|
||||
#
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
|
||||
#
|
||||
# Settings for apps/nshlib
|
||||
#
|
||||
CONFIG_NSH_FILEIOSIZE=512
|
||||
CONFIG_NSH_STRERROR=n
|
||||
CONFIG_NSH_LINELEN=64
|
||||
CONFIG_NSH_NESTDEPTH=3
|
||||
CONFIG_NSH_DISABLESCRIPT=n
|
||||
CONFIG_NSH_DISABLEBG=n
|
||||
CONFIG_NSH_ROMFSETC=n
|
||||
CONFIG_NSH_CONSOLE=y
|
||||
CONFIG_NSH_TELNET=n
|
||||
CONFIG_NSH_ARCHINIT=n
|
||||
CONFIG_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_NSH_DHCPC=n
|
||||
CONFIG_NSH_NOMAC=n
|
||||
CONFIG_NSH_IPADDR=0x0a000002
|
||||
CONFIG_NSH_DRIPADDR=0x0a000001
|
||||
CONFIG_NSH_NETMASK=0xffffff00
|
||||
CONFIG_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_NSH_ROMFSDEVNO=0
|
||||
CONFIG_NSH_ROMFSSECTSIZE=64
|
||||
CONFIG_NSH_FATDEVNO=1
|
||||
CONFIG_NSH_FATSECTSIZE=512
|
||||
CONFIG_NSH_FATNSECTORS=1024
|
||||
CONFIG_NSH_FATMOUNTPT="/tmp"
|
||||
|
||||
#
|
||||
# Architecture-specific NSH options
|
||||
#
|
||||
CONFIG_NSH_MMCSDSPIPORTNO=0
|
||||
CONFIG_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Settings for examples/usbserial
|
||||
#
|
||||
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
CONFIG_BOOT_RUNFROMFLASH=n
|
||||
CONFIG_BOOT_COPYTORAM=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
|
||||
#
|
||||
# Device Drivers
|
||||
#
|
||||
CONFIG_DISABLE_POLL=y
|
||||
CONFIG_DEV_NULL=y
|
||||
# CONFIG_DEV_ZERO is not set
|
||||
# CONFIG_LOOP is not set
|
||||
# CONFIG_RAMDISK is not set
|
||||
# CONFIG_CAN is not set
|
||||
# CONFIG_PWM is not set
|
||||
# CONFIG_I2C is not set
|
||||
# CONFIG_SPI is not set
|
||||
# CONFIG_RTC is not set
|
||||
# CONFIG_WATCHDOG is not set
|
||||
# CONFIG_ANALOG is not set
|
||||
# CONFIG_AUDIO_DEVICES is not set
|
||||
# CONFIG_BCH is not set
|
||||
# CONFIG_INPUT is not set
|
||||
# CONFIG_LCD is not set
|
||||
# CONFIG_MMCSD is not set
|
||||
# CONFIG_MTD is not set
|
||||
# CONFIG_PIPES is not set
|
||||
# CONFIG_PM is not set
|
||||
# CONFIG_POWER is not set
|
||||
# CONFIG_SENSORS is not set
|
||||
CONFIG_SERIAL=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
# CONFIG_16550_UART is not set
|
||||
CONFIG_ARCH_HAVE_UART=y
|
||||
CONFIG_MCU_SERIAL=y
|
||||
CONFIG_UART_SERIAL_CONSOLE=y
|
||||
# CONFIG_NO_SERIAL_CONSOLE is not set
|
||||
|
||||
#
|
||||
# UART Configuration
|
||||
#
|
||||
CONFIG_UART_RXBUFSIZE=256
|
||||
CONFIG_UART_TXBUFSIZE=256
|
||||
CONFIG_UART_BAUD=115200
|
||||
CONFIG_UART_BITS=8
|
||||
CONFIG_UART_PARITY=0
|
||||
CONFIG_UART_2STOP=0
|
||||
# CONFIG_USBDEV is not set
|
||||
# CONFIG_USBHOST is not set
|
||||
# CONFIG_WIRELESS is not set
|
||||
|
||||
#
|
||||
# System Logging Device Options
|
||||
#
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_RAMLOG is not set
|
||||
|
||||
#
|
||||
# Networking Support
|
||||
#
|
||||
# CONFIG_NET is not set
|
||||
|
||||
#
|
||||
# File Systems
|
||||
#
|
||||
|
||||
#
|
||||
# File system configuration
|
||||
#
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
# CONFIG_FS_RAMMAP is not set
|
||||
|
||||
#
|
||||
# System Logging
|
||||
#
|
||||
# CONFIG_SYSLOG_ENABLE is not set
|
||||
# CONFIG_SYSLOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_NX is not set
|
||||
|
||||
#
|
||||
# Memory Management
|
||||
#
|
||||
# CONFIG_MM_MULTIHEAP is not set
|
||||
# CONFIG_MM_SMALL is not set
|
||||
CONFIG_MM_REGIONS=3
|
||||
# CONFIG_GRAN is not set
|
||||
|
||||
#
|
||||
# Audio Support
|
||||
#
|
||||
# CONFIG_AUDIO is not set
|
||||
|
||||
#
|
||||
# Binary Formats
|
||||
#
|
||||
# CONFIG_BINFMT_DISABLE is not set
|
||||
# CONFIG_NXFLAT is not set
|
||||
# CONFIG_ELF is not set
|
||||
# CONFIG_BUILTIN is not set
|
||||
# CONFIG_PIC is not set
|
||||
# CONFIG_SYMTAB_ORDEREDBYNAME is not set
|
||||
|
||||
#
|
||||
# Library Routines
|
||||
#
|
||||
|
||||
#
|
||||
# Standard C Library Options
|
||||
#
|
||||
CONFIG_STDIO_BUFFER_SIZE=64
|
||||
CONFIG_STDIO_LINEBUFFER=y
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
# CONFIG_LIBM is not set
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH is not set
|
||||
# CONFIG_LIBC_FLOATINGPOINT is not set
|
||||
CONFIG_LIB_RAND_ORDER=1
|
||||
# CONFIG_EOL_IS_CR is not set
|
||||
# CONFIG_EOL_IS_LF is not set
|
||||
# CONFIG_EOL_IS_BOTH_CRLF is not set
|
||||
CONFIG_EOL_IS_EITHER_CRLF=y
|
||||
# CONFIG_LIBC_EXECFUNCS is not set
|
||||
CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024
|
||||
CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048
|
||||
# CONFIG_LIBC_STRERROR is not set
|
||||
# CONFIG_LIBC_PERROR_STDOUT is not set
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_LIB_SENDFILE_BUFSIZE=512
|
||||
# CONFIG_ARCH_ROMGETC is not set
|
||||
# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set
|
||||
|
||||
#
|
||||
# Non-standard Library Support
|
||||
#
|
||||
# CONFIG_SCHED_WORKQUEUE is not set
|
||||
# CONFIG_LIB_KBDCODEC is not set
|
||||
# CONFIG_LIB_SLCDCODEC is not set
|
||||
|
||||
#
|
||||
# Basic CXX Support
|
||||
#
|
||||
# CONFIG_C99_BOOL8 is not set
|
||||
# CONFIG_HAVE_CXX is not set
|
||||
|
||||
#
|
||||
# Application Configuration
|
||||
#
|
||||
|
||||
#
|
||||
# Built-In Applications
|
||||
#
|
||||
|
||||
#
|
||||
# Examples
|
||||
#
|
||||
# CONFIG_EXAMPLES_BUTTONS is not set
|
||||
# CONFIG_EXAMPLES_CAN is not set
|
||||
# CONFIG_EXAMPLES_COMPOSITE is not set
|
||||
# CONFIG_EXAMPLES_DHCPD is not set
|
||||
# CONFIG_EXAMPLES_ELF is not set
|
||||
# CONFIG_EXAMPLES_FTPC is not set
|
||||
# CONFIG_EXAMPLES_FTPD is not set
|
||||
# CONFIG_EXAMPLES_HELLO is not set
|
||||
# CONFIG_EXAMPLES_HELLOXX is not set
|
||||
# CONFIG_EXAMPLES_JSON is not set
|
||||
# CONFIG_EXAMPLES_HIDKBD is not set
|
||||
# CONFIG_EXAMPLES_KEYPADTEST is not set
|
||||
# CONFIG_EXAMPLES_IGMP is not set
|
||||
# CONFIG_EXAMPLES_LCDRW is not set
|
||||
# CONFIG_EXAMPLES_MM is not set
|
||||
# CONFIG_EXAMPLES_MODBUS is not set
|
||||
# CONFIG_EXAMPLES_MOUNT is not set
|
||||
# CONFIG_EXAMPLES_NRF24L01TERM is not set
|
||||
# CONFIG_EXAMPLES_NSH is not set
|
||||
# CONFIG_EXAMPLES_NULL is not set
|
||||
# CONFIG_EXAMPLES_NX is not set
|
||||
# CONFIG_EXAMPLES_NXCONSOLE is not set
|
||||
# CONFIG_EXAMPLES_NXFFS is not set
|
||||
# CONFIG_EXAMPLES_NXFLAT is not set
|
||||
# CONFIG_EXAMPLES_NXHELLO is not set
|
||||
# CONFIG_EXAMPLES_NXIMAGE is not set
|
||||
# CONFIG_EXAMPLES_NXLINES is not set
|
||||
# CONFIG_EXAMPLES_NXTEXT is not set
|
||||
CONFIG_EXAMPLES_OSTEST=y
|
||||
# CONFIG_EXAMPLES_OSTEST_BUILTIN is not set
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RANGE=10000
|
||||
CONFIG_EXAMPLES_OSTEST_RR_RUNS=10
|
||||
# CONFIG_EXAMPLES_PASHELLO is not set
|
||||
# CONFIG_EXAMPLES_PIPE is not set
|
||||
# CONFIG_EXAMPLES_POLL is not set
|
||||
# CONFIG_EXAMPLES_POSIXSPAWN is not set
|
||||
# CONFIG_EXAMPLES_QENCODER is not set
|
||||
# CONFIG_EXAMPLES_RGMP is not set
|
||||
# CONFIG_EXAMPLES_ROMFS is not set
|
||||
# CONFIG_EXAMPLES_SENDMAIL is not set
|
||||
# CONFIG_EXAMPLES_SERLOOP is not set
|
||||
# CONFIG_EXAMPLES_SLCD is not set
|
||||
# CONFIG_EXAMPLES_SMART is not set
|
||||
# CONFIG_EXAMPLES_TCPECHO is not set
|
||||
# CONFIG_EXAMPLES_TELNETD is not set
|
||||
# CONFIG_EXAMPLES_THTTPD is not set
|
||||
# CONFIG_EXAMPLES_TIFF is not set
|
||||
# CONFIG_EXAMPLES_TOUCHSCREEN is not set
|
||||
# CONFIG_EXAMPLES_UDP is not set
|
||||
# CONFIG_EXAMPLES_UIP is not set
|
||||
# CONFIG_EXAMPLES_USBSERIAL is not set
|
||||
# CONFIG_EXAMPLES_USBMSC is not set
|
||||
# CONFIG_EXAMPLES_USBTERM is not set
|
||||
# CONFIG_EXAMPLES_WATCHDOG is not set
|
||||
|
||||
#
|
||||
# Graphics Support
|
||||
#
|
||||
# CONFIG_TIFF is not set
|
||||
|
||||
#
|
||||
# Interpreters
|
||||
#
|
||||
# CONFIG_INTERPRETERS_FICL is not set
|
||||
# CONFIG_INTERPRETERS_PCODE is not set
|
||||
|
||||
#
|
||||
# Network Utilities
|
||||
#
|
||||
|
||||
#
|
||||
# Networking Utilities
|
||||
#
|
||||
# CONFIG_NETUTILS_CODECS is not set
|
||||
# CONFIG_NETUTILS_DHCPC is not set
|
||||
# CONFIG_NETUTILS_DHCPD is not set
|
||||
# CONFIG_NETUTILS_FTPC is not set
|
||||
# CONFIG_NETUTILS_FTPD is not set
|
||||
# CONFIG_NETUTILS_JSON is not set
|
||||
# CONFIG_NETUTILS_RESOLV is not set
|
||||
# CONFIG_NETUTILS_SMTP is not set
|
||||
# CONFIG_NETUTILS_TELNETD is not set
|
||||
# CONFIG_NETUTILS_TFTPC is not set
|
||||
# CONFIG_NETUTILS_THTTPD is not set
|
||||
# CONFIG_NETUTILS_UIPLIB is not set
|
||||
# CONFIG_NETUTILS_WEBCLIENT is not set
|
||||
|
||||
#
|
||||
# FreeModBus
|
||||
#
|
||||
# CONFIG_MODBUS is not set
|
||||
|
||||
#
|
||||
# NSH Library
|
||||
#
|
||||
# CONFIG_NSH_LIBRARY is not set
|
||||
|
||||
#
|
||||
# NxWidgets/NxWM
|
||||
#
|
||||
|
||||
#
|
||||
# System NSH Add-Ons
|
||||
#
|
||||
|
||||
#
|
||||
# Custom Free Memory Command
|
||||
#
|
||||
# CONFIG_SYSTEM_FREE is not set
|
||||
|
||||
#
|
||||
# I2C tool
|
||||
#
|
||||
|
||||
#
|
||||
# FLASH Program Installation
|
||||
#
|
||||
# CONFIG_SYSTEM_INSTALL is not set
|
||||
|
||||
#
|
||||
# FLASH Erase-all Command
|
||||
#
|
||||
|
||||
#
|
||||
# readline()
|
||||
#
|
||||
# CONFIG_SYSTEM_READLINE is not set
|
||||
|
||||
#
|
||||
# Power Off
|
||||
#
|
||||
# CONFIG_SYSTEM_POWEROFF is not set
|
||||
|
||||
#
|
||||
# RAMTRON
|
||||
#
|
||||
# CONFIG_SYSTEM_RAMTRON is not set
|
||||
|
||||
#
|
||||
# SD Card
|
||||
#
|
||||
# CONFIG_SYSTEM_SDCARD is not set
|
||||
|
||||
#
|
||||
# Sysinfo
|
||||
#
|
||||
# CONFIG_SYSTEM_SYSINFO is not set
|
||||
|
||||
#
|
||||
# USB Monitor
|
||||
#
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved.
|
||||
# Copyright (C) 2009-2010, 2012-2013 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
@ -37,12 +37,12 @@
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = up_boot.c up_leds.c up_buttons.c up_spi.c up_usbdev.c
|
||||
|
||||
ifeq ($(CONFIG_SAM3U_HSMCI),y)
|
||||
ifeq ($(CONFIG_SAM34_HSMCI),y)
|
||||
CSRCS += up_lcd.c
|
||||
endif
|
||||
|
||||
@ -50,7 +50,7 @@ ifeq ($(CONFIG_NSH_ARCHINIT),y)
|
||||
CSRCS += up_nsh.c
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_SAM3U_HSMCI),y)
|
||||
ifeq ($(CONFIG_SAM34_HSMCI),y)
|
||||
CSRCS += up_mmcsd.c
|
||||
endif
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3uek_eval/src/sam3uek_internal.h
|
||||
* arch/arm/src/board/sam3uek_internal.n
|
||||
*
|
||||
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -56,7 +56,7 @@
|
||||
/* External Memory Usage ************************************************************/
|
||||
/* LCD on CS2 */
|
||||
|
||||
#define LCD_BASE SAM3U_EXTCS2_BASE
|
||||
#define LCD_BASE SAM_EXTCS2_BASE
|
||||
|
||||
/* Touchscreen controller (TSC) */
|
||||
|
||||
@ -142,7 +142,7 @@
|
||||
#define GPIO_TCS_IRQ (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN24)
|
||||
#define GPIO_TCS_BUSY (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_PORT_PIOA|GPIO_PIN2)
|
||||
|
||||
#define SAM3U_TCS_IRQ SAM3U_IRQ_PA24
|
||||
#define SAM_TCS_IRQ SAM_IRQ_PA24
|
||||
|
||||
/* LEDs */
|
||||
|
||||
@ -155,8 +155,8 @@
|
||||
#define GPIO_BUTTON1 (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN18)
|
||||
#define GPIO_BUTTON2 (GPIO_INPUT|GPIO_CFG_PULLUP|GPIO_CFG_DEGLITCH|GPIO_PORT_PIOA|GPIO_PIN19)
|
||||
|
||||
#define IRQ_BUTTON1 SAM3U_IRQ_PA18
|
||||
#define IRQ_BUTTON2 SAM3U_IRQ_PA19
|
||||
#define IRQ_BUTTON1 SAM_IRQ_PA18
|
||||
#define IRQ_BUTTON2 SAM_IRQ_PA19
|
||||
|
||||
/* SD Card Detect */
|
||||
|
||||
@ -214,11 +214,11 @@ extern void weak_function sam3u_usbinitialize(void);
|
||||
* Name: sam3u_hsmciinit
|
||||
*
|
||||
* Description:
|
||||
* Initialize HSMCI support
|
||||
* Initialize HSMCI support
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SAM3U_HSMCI
|
||||
#ifdef CONFIG_SAM34_HSMCI
|
||||
extern int weak_function sam3u_hsmciinit(void);
|
||||
#else
|
||||
# define sam3u_hsmciinit()
|
||||
@ -232,7 +232,7 @@ extern int weak_function sam3u_hsmciinit(void);
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SAM3U_HSMCI
|
||||
#ifdef CONFIG_SAM34_HSMCI
|
||||
extern bool sam3u_cardinserted(unsigned char slot);
|
||||
#else
|
||||
# define sam3u_cardinserted(slot) (false)
|
||||
@ -246,7 +246,7 @@ extern bool sam3u_cardinserted(unsigned char slot);
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_SAM3U_HSMCI
|
||||
#ifdef CONFIG_SAM34_HSMCI
|
||||
extern bool sam3u_writeprotected(unsigned char slot);
|
||||
#else
|
||||
# define sam3u_writeprotected(slot) (false)
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3u-ek/src/up_boot.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2009-2011 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -75,7 +75,7 @@ void sam3u_boardinitialize(void)
|
||||
* sam3u_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SAM3U_SPI
|
||||
#ifdef CONFIG_SAM34_SPI
|
||||
if (sam3u_spiinitialize)
|
||||
{
|
||||
sam3u_spiinitialize();
|
||||
@ -87,7 +87,7 @@ void sam3u_boardinitialize(void)
|
||||
* into the build.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_USBDEV) && defined(CONFIG_SAM3U_USB)
|
||||
#if defined(CONFIG_USBDEV) && defined(CONFIG_SAM34_USB)
|
||||
if (sam3u_usbinitialize)
|
||||
{
|
||||
sam3u_usbinitialize();
|
||||
@ -104,7 +104,7 @@ void sam3u_boardinitialize(void)
|
||||
* function sam3u_hsmciinit() has been brought into the build.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_SAM3U_HSMCI
|
||||
#ifdef CONFIG_SAM34_HSMCI
|
||||
if (sam3u_hsmciinit)
|
||||
{
|
||||
sam3u_hsmciinit();
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3u-ek/src/up_lcd.c
|
||||
* arch/arm/src/board/up_lcd.c
|
||||
*
|
||||
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2010-2011, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -125,8 +125,8 @@
|
||||
#include <arch/irq.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "sam3u_pmc.h"
|
||||
#include "sam3u_smc.h"
|
||||
#include "chip/sam_pmc.h"
|
||||
#include "chip/sam_smc.h"
|
||||
#include "sam3u_internal.h"
|
||||
#include "sam3uek_internal.h"
|
||||
|
||||
@ -385,7 +385,7 @@ static const struct fb_videoinfo_s g_videoinfo =
|
||||
|
||||
/* This is the standard, NuttX Plane information object */
|
||||
|
||||
static const struct lcd_planeinfo_s g_planeinfo =
|
||||
static const struct lcd_planeinfo_s g_planeinfo =
|
||||
{
|
||||
.putrun = sam3u_putrun, /* Put a run into LCD memory */
|
||||
.getrun = sam3u_getrun, /* Get a run from LCD memory */
|
||||
@ -395,12 +395,12 @@ static const struct lcd_planeinfo_s g_planeinfo =
|
||||
|
||||
/* This is the standard, NuttX LCD driver object */
|
||||
|
||||
static struct sam3u_dev_s g_lcddev_s =
|
||||
static struct sam3u_dev_s g_lcddev_s =
|
||||
{
|
||||
.dev =
|
||||
{
|
||||
/* LCD Configuration */
|
||||
|
||||
|
||||
.getvideoinfo = sam3u_getvideoinfo,
|
||||
.getplaneinfo = sam3u_getplaneinfo,
|
||||
|
||||
@ -901,33 +901,33 @@ int up_lcdinitialize(void)
|
||||
|
||||
/* Enable SMC peripheral clock */
|
||||
|
||||
putreg32((1 << SAM3U_PID_SMC), SAM3U_PMC_PCER);
|
||||
regdbg("PMC PCSR: %08x SMC: %08x\n", getreg32(SAM3U_PMC_PCSR), (1 << SAM3U_PID_SMC));
|
||||
putreg32((1 << SAM_PID_SMC), SAM_PMC_PCER);
|
||||
regdbg("PMC PCSR: %08x SMC: %08x\n", getreg32(SAM_PMC_PCSR), (1 << SAM_PID_SMC));
|
||||
|
||||
/* Configure SMC CS2 */
|
||||
|
||||
regval = (4 << SMCCS_SETUP_NWESETUP_SHIFT) | (2 << SMCCS_SETUP_NCSWRSETUP_SHIFT) |
|
||||
(4 << SMCCS_SETUP_NRDSETUP_SHIFT) | (2 << SMCCS_SETUP_NCSRDSETUP_SHIFT);
|
||||
putreg32(regval, SAM3U_SMCCS_SETUP(2));
|
||||
putreg32(regval, SAM_SMCCS_SETUP(2));
|
||||
|
||||
regval = (5 << SMCCS_PULSE_NWEPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSWRPULSE_SHIFT) |
|
||||
(5 << SMCCS_PULSE_RDPULSE_SHIFT) | (18 << SMCCS_PULSE_NCSRDPULSE_SHIFT);
|
||||
putreg32(regval, SAM3U_SMCCS_PULSE(2));
|
||||
putreg32(regval, SAM_SMCCS_PULSE(2));
|
||||
|
||||
regval = (22 << SMCCS_CYCLE_NWECYCLE_SHIFT) | (22 << SMCCS_CYCLE_NRDCYCLE_SHIFT);
|
||||
putreg32(regval, SAM3U_SMCCS_CYCLE(2));
|
||||
putreg32(regval, SAM_SMCCS_CYCLE(2));
|
||||
|
||||
regval = getreg32(SAM3U_SMCCS_MODE(2));
|
||||
regval = getreg32(SAM_SMCCS_MODE(2));
|
||||
regval &= ~(SMCCS_MODE_DBW_MASK | SMCCS_MODE_PMEN);
|
||||
regval |= (SMCCS_MODE_READMODE) | (SMCCS_MODE_WRITEMODE) | (SMCCS_MODE_DBW_16BITS);
|
||||
putreg32(regval, SAM3U_SMCCS_MODE(2));
|
||||
putreg32(regval, SAM_SMCCS_MODE(2));
|
||||
|
||||
regdbg("SMC SETUP[%08x]: %08x PULSE[%08x]: %08x\n",
|
||||
SAM3U_SMCCS_SETUP(2), getreg32(SAM3U_SMCCS_SETUP(2)),
|
||||
SAM3U_SMCCS_PULSE(2), getreg32(SAM3U_SMCCS_PULSE(2)));
|
||||
SAM_SMCCS_SETUP(2), getreg32(SAM_SMCCS_SETUP(2)),
|
||||
SAM_SMCCS_PULSE(2), getreg32(SAM_SMCCS_PULSE(2)));
|
||||
regdbg(" CYCLE[%08x]: %08x MODE[%08x]: %08x\n",
|
||||
SAM3U_SMCCS_CYCLE(2), getreg32(SAM3U_SMCCS_CYCLE(2)),
|
||||
SAM3U_SMCCS_MODE(2), getreg32(SAM3U_SMCCS_MODE(2)));
|
||||
SAM_SMCCS_CYCLE(2), getreg32(SAM_SMCCS_CYCLE(2)),
|
||||
SAM_SMCCS_MODE(2), getreg32(SAM_SMCCS_MODE(2)));
|
||||
|
||||
/* Check HX8347 Chip ID */
|
||||
|
||||
@ -989,7 +989,7 @@ int up_lcdinitialize(void)
|
||||
sam3u_putreg(HX8347_R09H, 0x3f); /* Row address end1 */
|
||||
|
||||
/* Display Setting */
|
||||
|
||||
|
||||
sam3u_putreg(HX8347_R01H, 0x06); /* IDMON=0 INVON=1 NORON=1 PTLON=0 */
|
||||
sam3u_putreg(HX8347_R16H, 0xc8); /* MY=1 MX=1 MV=0 BGR=1 */
|
||||
sam3u_putreg(HX8347_R23H, 0x95); /* N_DC=1001 0101 */
|
||||
@ -1063,7 +1063,7 @@ void up_lcduninitialize(void)
|
||||
|
||||
/* Disable SMC peripheral clock */
|
||||
|
||||
putreg32((1 << SAM3U_PID_SMC), SAM3U_PMC_PCDR);
|
||||
putreg32((1 << SAM_PID_SMC), SAM_PMC_PCDR);
|
||||
}
|
||||
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3u-ek/src/up_mmcsd.c
|
||||
* arch/arm/src/board/up_mmcsd.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -46,7 +46,7 @@
|
||||
#include "sam3u_internal.h"
|
||||
#include "sam3uek_internal.h"
|
||||
|
||||
#ifdef CONFIG_SAM3U_HSMCI
|
||||
#ifdef CONFIG_SAM34_HSMCI
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
@ -136,4 +136,4 @@ bool sam3u_writeprotected(unsigned char slot)
|
||||
return false;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SAM3U_HSMCI */
|
||||
#endif /* CONFIG_SAM34_HSMCI */
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* config/sam3u-ek/src/up_nsh.c
|
||||
* arch/arm/src/board/up_nsh.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2010, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -51,7 +51,7 @@
|
||||
#include "sam3u_internal.h"
|
||||
#include "sam3uek_internal.h"
|
||||
|
||||
#ifdef CONFIG_SAM3U_HSMCI
|
||||
#ifdef CONFIG_SAM34_HSMCI
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
@ -83,7 +83,7 @@
|
||||
* is not enabled.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_SAM3U_HSMCI)
|
||||
#if defined(CONFIG_DISABLE_MOUNTPOINT) || !defined(CONFIG_SAM34_HSMCI)
|
||||
# undef NSH_HAVE_MMCSD
|
||||
#endif
|
||||
|
||||
@ -149,7 +149,7 @@ int nsh_archinitialize(void)
|
||||
return ret;
|
||||
}
|
||||
message("nsh_archinitialize: Successfully bound SDIO to the MMC/SD driver\n");
|
||||
|
||||
|
||||
/* Then inform the HSMCI driver if there is or is not a card in the slot. */
|
||||
|
||||
sdio_mediachange(sdio, sam3u_cardinserted(0));
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3u-ek/src/up_spi.c
|
||||
* arch/arm/src/board/up_spi.c
|
||||
*
|
||||
* Copyright (C) 2009, 2011 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2009, 2011, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -53,7 +53,7 @@
|
||||
#include "sam3u_internal.h"
|
||||
#include "sam3uek_internal.h"
|
||||
|
||||
#ifdef CONFIG_SAM3U_SPI
|
||||
#ifdef CONFIG_SAM34_SPI
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
@ -137,7 +137,7 @@ void weak_function sam3u_spiinitialize(void)
|
||||
* 3. Add a call to up_spiinitialize() in your low level application
|
||||
* initialization logic
|
||||
* 4. The handle returned by up_spiinitialize() may then be used to bind the
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* SPI driver to higher level logic (e.g., calling
|
||||
* mmcsd_spislotinitialize(), for example, will bind the SPI driver to
|
||||
* the SPI MMC/SD driver).
|
||||
*
|
||||
@ -240,4 +240,4 @@ uint8_t sam3u_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SAM3U_SPI */
|
||||
#endif /* CONFIG_SAM34_SPI */
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sam3u-ek/src/up_touchscreen.c
|
||||
* arch/arm/src/board/up_touchscreen.c
|
||||
*
|
||||
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2011-2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -63,8 +63,8 @@
|
||||
# error "Touchscreen support requires CONFIG_INPUT"
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_SAM3U_SPI
|
||||
# error "Touchscreen support requires CONFIG_SAM3U_SPI"
|
||||
#ifndef CONFIG_SAM34_SPI
|
||||
# error "Touchscreen support requires CONFIG_SAM34_SPI"
|
||||
#endif
|
||||
|
||||
#ifndef CONFIG_GPIOA_IRQ
|
||||
@ -154,22 +154,22 @@ static int tsc_attach(FAR struct ads7843e_config_s *state, xcpt_t isr)
|
||||
{
|
||||
/* Attach the ADS7843E interrupt */
|
||||
|
||||
ivdbg("Attaching %p to IRQ %d\n", isr, SAM3U_TCS_IRQ);
|
||||
return irq_attach(SAM3U_TCS_IRQ, isr);
|
||||
ivdbg("Attaching %p to IRQ %d\n", isr, SAM_TCS_IRQ);
|
||||
return irq_attach(SAM_TCS_IRQ, isr);
|
||||
}
|
||||
|
||||
static void tsc_enable(FAR struct ads7843e_config_s *state, bool enable)
|
||||
{
|
||||
/* Attach and enable, or detach and disable */
|
||||
|
||||
ivdbg("IRQ:%d enable:%d\n", SAM3U_TCS_IRQ, enable);
|
||||
ivdbg("IRQ:%d enable:%d\n", SAM_TCS_IRQ, enable);
|
||||
if (enable)
|
||||
{
|
||||
sam3u_gpioirqenable(SAM3U_TCS_IRQ);
|
||||
sam3u_gpioirqenable(SAM_TCS_IRQ);
|
||||
}
|
||||
else
|
||||
{
|
||||
sam3u_gpioirqdisable(SAM3U_TCS_IRQ);
|
||||
sam3u_gpioirqdisable(SAM_TCS_IRQ);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@ -1,7 +1,7 @@
|
||||
/****************************************************************************
|
||||
* configs/sam3u-ek/src/up_usbmsc.c
|
||||
*
|
||||
* Copyright (C) 2009 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2009, 2013 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Configure and register the SAM3U MMC/SD SDIO block driver.
|
||||
@ -50,7 +50,7 @@
|
||||
|
||||
#include "sam3u_internal.h"
|
||||
|
||||
#ifdef CONFIG_SAM3U_SDIO
|
||||
#ifdef CONFIG_SAM34_SDIO
|
||||
|
||||
/****************************************************************************
|
||||
* Pre-Processor Definitions
|
||||
@ -65,8 +65,8 @@
|
||||
/* SLOT number(s) could depend on the board configuration */
|
||||
|
||||
#ifdef CONFIG_ARCH_BOARD_SAM3U10E_EVAL
|
||||
# undef SAM3U_MMCSDSLOTNO
|
||||
# define SAM3U_MMCSDSLOTNO 0
|
||||
# undef SAM_MMCSDSLOTNO
|
||||
# define SAM_MMCSDSLOTNO 0
|
||||
#else
|
||||
/* Add configuration for new SAM3U boards here */
|
||||
# error "Unrecognized SAM3U board"
|
||||
@ -113,13 +113,13 @@ int usbmsc_archinitialize(void)
|
||||
|
||||
message("usbmsc_archinitialize: "
|
||||
"Initializing SDIO slot %d\n",
|
||||
SAM3U_MMCSDSLOTNO);
|
||||
SAM_MMCSDSLOTNO);
|
||||
|
||||
sdio = sdio_initialize(SAM3U_MMCSDSLOTNO);
|
||||
sdio = sdio_initialize(SAM_MMCSDSLOTNO);
|
||||
if (!sdio)
|
||||
{
|
||||
message("usbmsc_archinitialize: Failed to initialize SDIO slot %d\n",
|
||||
SAM3U_MMCSDSLOTNO);
|
||||
SAM_MMCSDSLOTNO);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
@ -139,7 +139,7 @@ int usbmsc_archinitialize(void)
|
||||
}
|
||||
message("usbmsc_archinitialize: "
|
||||
"Successfully bound SDIO to the MMC/SD driver\n");
|
||||
|
||||
|
||||
/* Then let's guess and say that there is a card in the slot. I need to check to
|
||||
* see if the SAM3U10E-EVAL board supports a GPIO to detect if there is a card in
|
||||
* the slot.
|
||||
@ -149,4 +149,4 @@ int usbmsc_archinitialize(void)
|
||||
return OK;
|
||||
}
|
||||
|
||||
#endif /* CONFIG_SAM3U_SDIO */
|
||||
#endif /* CONFIG_SAM34_SDIO */
|
||||
|
||||
@ -1,49 +0,0 @@
|
||||
############################################################################
|
||||
# configs/sam3u-ek/touchscreen/appconfig
|
||||
#
|
||||
# Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# Path to example in apps/examples containing the user_start entry point
|
||||
|
||||
CONFIGURED_APPS += examples/nsh
|
||||
|
||||
# The NSH application library
|
||||
|
||||
CONFIGURED_APPS += system/readline
|
||||
CONFIGURED_APPS += nshlib
|
||||
|
||||
# The NX and NXHELLO examples configured as an NX built-in commands
|
||||
|
||||
CONFIGURED_APPS += examples/nx
|
||||
CONFIGURED_APPS += examples/nxhello
|
||||
CONFIGURED_APPS += examples/touchscreen
|
||||
1111
configs/sam3u-ek/touchscreen/defconfig
Executable file → Normal file
1111
configs/sam3u-ek/touchscreen/defconfig
Executable file → Normal file
File diff suppressed because it is too large
Load Diff
Loading…
Reference in New Issue
Block a user