Add support for the Sure DB-DP11212 PIC32 board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4476 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
e07258e203
commit
ea7b658270
@ -2552,3 +2552,5 @@
|
||||
|
||||
6.17 2012-xx-xx Gregory Nutt <gnutt@nuttx.org>
|
||||
|
||||
* configs/sure-pic32mx: Add support for the Sure DB-DP11212 PIC32 General
|
||||
Purpose Demo Board
|
||||
|
||||
@ -8,7 +8,7 @@
|
||||
<tr align="center" bgcolor="#e4e4e4">
|
||||
<td>
|
||||
<h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
|
||||
<p>Last Updated: March 10, 2012</p>
|
||||
<p>Last Updated: March 11, 2012</p>
|
||||
</td>
|
||||
</tr>
|
||||
</table>
|
||||
@ -478,7 +478,7 @@
|
||||
<td>
|
||||
<p>
|
||||
<li>
|
||||
Network, USB (host), USB (device), serial, CAN, ADC, DAC, and PWM driver architectures.
|
||||
Network, USB (host), USB (device), serial, CAN, ADC, DAC, PWM, and Quadrature Encoder driver architectures.
|
||||
</li>
|
||||
</p>
|
||||
</tr>
|
||||
@ -1790,7 +1790,7 @@
|
||||
<a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>) as well as several other configurations.
|
||||
Additional drivers and configurations were added in NuttX 6.13-6.16.
|
||||
Drivers include an Ethernet driver, ADC driver, DAC driver, PWM driver, CAN driver, F4 RTC driver, Quadrature Encoder, DMA, SDIO with DMA
|
||||
(most of these are compatible with the F1 family as well).
|
||||
(these should all be compatible with the STM32 F2 family and many should also be compatible with the STM32 F1 family as well).
|
||||
The NuttX6.16 release also includes and logic for saving/restoring F4 FPU registers in context switches.
|
||||
Networking intensions include support for Telnet NSH sessions and new configurations for DHPCD and the networking test (nettest).
|
||||
A more complete port would include support for SDIO and USB OTG which are not available in NuttX 6.13.
|
||||
|
||||
@ -12,7 +12,7 @@
|
||||
<h1><big><font color="#3c34ec">
|
||||
<i>NuttX RTOS Porting Guide</i>
|
||||
</font></big></h1>
|
||||
<p>Last Updated: March 3, 2011</p>
|
||||
<p>Last Updated: March 11, 2011</p>
|
||||
</td>
|
||||
</tr>
|
||||
</table>
|
||||
@ -128,7 +128,8 @@
|
||||
<a href="#usbdevdrivers">6.3.10 USB Device-Side Drivers</a><br>
|
||||
<a href="#analogdrivers">6.3.11 Analog (ADC/DAC) Drivers</a><br>
|
||||
<a href="#pwmdrivers">6.3.12 PWM Drivers</a><br>
|
||||
<a href="#candrivers">6.3.13 CAN Drivers</a>
|
||||
<a href="#candrivers">6.3.13 CAN Drivers</a><br>
|
||||
<a href="#quadencoder">6.3.14 Quadrature Encoder Drivers</a>
|
||||
</ul>
|
||||
<a href="#pwrmgmt">6.4 Power Management</a>
|
||||
<ul>
|
||||
@ -3258,6 +3259,35 @@ extern void up_ledoff(int led);
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
<h3><a name="quadencoder">6.3.14 Quadrature Encoder Drivers</a></h3>
|
||||
<p>
|
||||
NuttX supports only a low-level, two-part Quadrature Driver driver.
|
||||
</p>
|
||||
<ol>
|
||||
<li>
|
||||
An "upper half", generic driver that provides the comman Quadrature Encoder interface to application level code, and
|
||||
</li>
|
||||
<li>
|
||||
A "lower half", platform-specific driver that implements the low-level timer controls to implement the Quadrature Encoder functionality.
|
||||
</li>
|
||||
</ol>
|
||||
<p>
|
||||
Files supporting the Quadrature Encoder can be found in the following locations:
|
||||
</p>
|
||||
<ul>
|
||||
<li><b>Interface Definition</b>.
|
||||
The header file for the NuttX Quadrature Encoder driver reside at <code>include/nuttx/sensors/qencoder.h</code>.
|
||||
This header file includes both the application level interface to the Quadrature Encoder driver as well as the interface between the "upper half" and "lower half" drivers.
|
||||
The Quadrature Encoder module uses a standard character driver framework.
|
||||
</li>
|
||||
<li><b>"Upper Half" Driver</b>.
|
||||
The generic, "upper half" Quadrature Encoder driver resides at <code>drivers/sensors/qencoder.c</code>.
|
||||
</li>
|
||||
<li><b>"Lower Half" Drivers</b>.
|
||||
Platform-specific Quadrature Encoder drivers reside in <code>arch/</code><i><architecture></i><code>/src/</code><i><chip></i> directory for the specific processor <i><architecture></i> and for the specific <i><chip></i> Quadrature Encoder peripheral devices.
|
||||
</li>
|
||||
</ul>
|
||||
|
||||
<h2><a name="pwrmgmt">6.4 Power Management</a></h2>
|
||||
|
||||
<h3><a name="pmoverview">6.4.1 Overview</a></h3>
|
||||
|
||||
@ -42,7 +42,10 @@ Contents
|
||||
PIC32MX440F512H Pin Out
|
||||
=======================
|
||||
|
||||
PIC32MX440F512H 64-Pin QFN (USB) Pin Out.
|
||||
DB_DP11215 PIC32 Storage Demo Board
|
||||
-----------------------------------
|
||||
PIC32MX440F512H 64-Pin QFN (USB) Pin Out as used on the DB_DP11215 PIC32 Storage
|
||||
Demo Board.
|
||||
|
||||
LEFT SIDE, TOP-TO-BOTTOM (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
@ -65,7 +68,8 @@ PIC32MX440F512H Pin Out
|
||||
RB1
|
||||
16 PGED1/AN0/VREF+/CVREF+/PMA6/ N/C Not connected
|
||||
CN2/RB0
|
||||
*FLASH (U1, SOIOC) not populated
|
||||
|
||||
*FLASH (U1, SOIC) not populated
|
||||
|
||||
BOTTOM SIDE, LEFT-TO-RIGHT (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
@ -88,7 +92,7 @@ PIC32MX440F512H Pin Out
|
||||
31 SDA2/U2RX/PMA9/CN17/RF4 RXD2_MCU J5 DB9 via RS232 driver
|
||||
32 SCL2/U2TX/PMA8/CN18/RF5 TXD2_MCU J5 DB9 via RS232 driver
|
||||
|
||||
*FLASH (U1, SOIOC) not populated
|
||||
*FLASH (U1, SOIC) not populated
|
||||
|
||||
RIGHT SIDE, TOP-TO-BOTTOM (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
@ -133,6 +137,96 @@ PIC32MX440F512H Pin Out
|
||||
|
||||
*USB-to-UART bridge (U1, CP2102) not populated
|
||||
|
||||
DB-DP11212 PIC32 General Purpose Demo Board
|
||||
-------------------------------------------
|
||||
PIC32MX440F512H 64-Pin QFN (USB) Pin Out as used on the DB-DP11212 PIC32 General
|
||||
Purpose Demo Board
|
||||
|
||||
LEFT SIDE, TOP-TO-BOTTOM (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
---- ----------------------------- -------------- -------------------------------
|
||||
1 PMD5/RE5 PMPD5 Display, JP1-12, DB5
|
||||
2 PMD6/RE6 PMPD6 Display, JP1-13, DB6
|
||||
3 PMD7/RE7 PMPD7 Display, JP1-14, DB7
|
||||
4 SCK2/PMA5/CN8/RG6 SCK FLASH (U4) SCK*
|
||||
5 SDI2/PMA4/CN9/RG7 SDI FLASH (U4) SO*
|
||||
6 SDO2/PMA3/CN10/RG8 SDO FLASH (U4) SI*
|
||||
7 MCLR\ PIC_MCLR Pulled high, J2-1, ICSP
|
||||
8 SS2/PMA2/CN11/RG9 N/C Not connected
|
||||
9 Vss Grounded
|
||||
10 Vdd +3.3V ---
|
||||
11 Vbuson/AN5/CN7/RB5 RB5 LCD SEG5 (F), U5-10
|
||||
12 AN4/CN6/RB4 RB4 LCD SEG4 (E), U5-1
|
||||
13 AN3/CN5/RB3 RB3 LCD SEG3 (D), U5-2
|
||||
14 AN2/CN4/RB2 RB2 LCD SEG2 (C), U5-4
|
||||
15 PGEC1/AN1/Vref-/CN3/RB1 RB1 LCD SEG1 (B), U5-7
|
||||
16 PGED1/AN0/VREF+/CVREF+/PMA6/ RB0 LCD SEG0 (A), U5-11
|
||||
CN2/RB0
|
||||
|
||||
*FLASH (U4, SOIC) not populated
|
||||
|
||||
BOTTOM SIDE, LEFT-TO-RIGHT (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
---- ----------------------------- -------------- -------------------------------
|
||||
17 PGEC2/AN6/OCFA/RB6 PIC_PGC2 J2-5, ICSP
|
||||
18 PGED2/AN7/RB7 PIC_PGD2 J2-4, ICSP
|
||||
19 AVdd +3.3V ---
|
||||
20 AVss Grounded
|
||||
21 AN8/U2CTS/RB8 RB8 LCD SEG6 (G), U5-5
|
||||
22 AN9/PMA7/RB9 RB9 LCD SEG7 (DP), U5-3
|
||||
23 TMS/AN10/PMA13/RB10 UTIL_WP FLASH (U4) WP*
|
||||
24 TDO/AN11/PMA12/RB11 UTIL_CS FLASH (U4) CS*
|
||||
25 Vss Grounded
|
||||
26 Vdd +3.3V ---
|
||||
27 TCK/AN12/PMA11/RB12 N/C Not connected
|
||||
28 TDI/AN13/PMA10/RB13 N/C Not connected
|
||||
29 AN14/U2RTS/PMA1/RB14 temp_AD temp_AD
|
||||
30 AN15/PMA0/CN12/RB15 PMPA0 Display, JP1-4, RS
|
||||
31 SDA2/U2RX/PMA9/CN17/RF4 SDA LM75/SO, U3-1, SDA
|
||||
32 SCL2/U2TX/PMA8/CN18/RF5 SCL LM75/SO, U3-2, SCL
|
||||
|
||||
*FLASH (U4, SOIC) not populated
|
||||
|
||||
RIGHT SIDE, TOP-TO-BOTTOM (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
---- ----------------------------- -------------- -------------------------------
|
||||
48 SOSCO/T1CK/CN0/RC14 SOSCO 32.768KHz XTAL (Y1)
|
||||
47 SOSCI/CN1/RC13 SOSCI 32.768KHz XTAL (Y1)
|
||||
46 OC1/INT0/RD0 RD0 LCD DIG1, U5-12
|
||||
45 IC4/PMCS1/PMA14/RD11 PMCS1 Display, JP1-6, E
|
||||
44 SCL1/PMCS2/PMA15 RD10 LCD DIG2, U5-9
|
||||
43 SDA1/RD9 RD9 LCD DIG3, U5-8
|
||||
42 RTCC/RD8 RD8 LCD DIG4, U5-6
|
||||
41 Vss Grounded
|
||||
40 OSC2/CLKO/RC15 OSC2 20MHz XTAL (Y2)
|
||||
39 OSC1/CLKI/RC12 OSC1 20MHz XTAL (Y2)
|
||||
38 Vdd +3.3V ---
|
||||
37 D+ MCU_D+ USB connectors via PHY
|
||||
36 D- MCU_D- USB connectors via PHY
|
||||
35 Vusb +3.3V ---
|
||||
34 Vbus +5V_DUSB Display, USB Mini-B, USB Type A, JP1-1, +5V
|
||||
33 USBID/RF3 N/C Not connected
|
||||
|
||||
TOP SIDE, LEFT-TO-RIGHT (if pin 1 is in upper left)
|
||||
PIN NAME SIGNAL NOTES
|
||||
---- ----------------------------- -------------- -------------------------------
|
||||
64 PMPD4/RD4 PMPD4 Display, JP1-11, DB4
|
||||
63 PMPD3/RD3 PMPD3 Display, JP1-10, DB3
|
||||
62 PMPD2/RD2 PMPD2 Display, JP1-9, DB2
|
||||
61 PMPD1/RD1 PMPD1 Display, JP1-8, DB1
|
||||
60 PMPD0/RE0 PMPD0 Display, JP1-7, DB0
|
||||
59 RF1 Key3 SW3-1
|
||||
58 RF0 Key2 SW2-1
|
||||
57 ENVREG ENVREG Pulled high
|
||||
56 Vcap/Vddcore VDDCORE Capacitors to ground
|
||||
55 CN16/RD7 N/C Not connected
|
||||
54 CN15/RD6 Key5 SW5-1
|
||||
53 PMRD/CN14/RD5 PMPRD ---
|
||||
52 OC5/PMWR/CN13/RD4 PWM2 Used to control backlight level (Vo)
|
||||
51 U1TX/OC4/RD3 N/C Not connected
|
||||
50 U1RX/OC3/RD2 N/C Not connected
|
||||
49 OC2/RD1 PWM1 Used to control backlight level (K)
|
||||
|
||||
Toolchains
|
||||
==========
|
||||
|
||||
|
||||
@ -2,7 +2,7 @@
|
||||
* configs/sure-pic32mx/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
|
||||
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
@ -91,8 +91,9 @@
|
||||
#undef BOARD_TIMER1_SOSC
|
||||
|
||||
/* LED definitions **********************************************************/
|
||||
/* The Sure PIC32MX board has five LEDs. One (D4, lablel "Power") is not
|
||||
* controllable by software. Four are controllable by software:
|
||||
/* The Sure DB_DP11215 PIC32 Storage Demo Board board has five LEDs. One
|
||||
* (D4, lablel "Power") is not controllable by software. Four are
|
||||
* controllable by software:
|
||||
*
|
||||
* D7 "USB" Yellow RD7 Low illuminates
|
||||
* D8 "SD" Yellow RD6 Low illuminates
|
||||
@ -111,6 +112,12 @@
|
||||
#define LED_PANIC 5 /* N/C N/C N/C ON N/C N/C N/C OFF */
|
||||
#define LED_NVALUES 6
|
||||
|
||||
/* The Sure DB-DP11212 PIC32 General Purpose Demo Board does not have any user
|
||||
* controllable LEDs, but does does have a segment LED display. That display is
|
||||
* however, obscured by the larger segment display attached to the board and, so,
|
||||
* is not supported.
|
||||
*/
|
||||
|
||||
/* For distinguishing individual LEDs */
|
||||
|
||||
#define LED_USB 0
|
||||
|
||||
@ -40,9 +40,14 @@ CFLAGS += -I$(TOPDIR)/sched
|
||||
ASRCS =
|
||||
CSRCS = up_boot.c up_spi.c
|
||||
|
||||
# Only the DB_DP11215 PIC32 Storage Demo Board board has user controllable
|
||||
# LEDs
|
||||
|
||||
ifeq ($(CONFIG_ARCH_DBDP11215),y)
|
||||
ifeq ($(CONFIG_ARCH_LEDS),y)
|
||||
CSRCS += up_leds.c
|
||||
endif
|
||||
endif
|
||||
|
||||
ifeq ($(CONFIG_ARCH_BUTTONS),y)
|
||||
CSRCS += up_buttons.c
|
||||
|
||||
@ -58,20 +58,33 @@
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
/* The Sure PIC32MX board has three buttons.
|
||||
/* The Sure DB_DP11215 PIC32 Storage Demo Board has three buttons.
|
||||
*
|
||||
* SW1 (SW_UP, left arrow) RB3 Pulled high, Grounded/low when depressed
|
||||
* SW2 (SW_DOWN, down/right arrow) RB2 Pulled high, Grounded/low when depressed
|
||||
* SW3 (SW_OK, right arrow) RB4 Pulled high, Grounded/low when depressed
|
||||
*
|
||||
* The Sure DB-DP11212 PIC32 General Purpose Demo Board also has three buttons,
|
||||
* but these are connected differently:
|
||||
*
|
||||
* SW2-1 RF0 Pulled high, Grounded/low when depressed
|
||||
* SW3-1 RF1 Pulled high, Grounded/low when depressed
|
||||
* SW5-1 RD6 Pulled high, Grounded/low when depressed
|
||||
*
|
||||
* Internal pull-ups are not required since the LEDs are pull-up externally.
|
||||
* Change notification interrupts are not *automatically* enabled. Change
|
||||
* notification will be enabled when pic32mx_gpioattach() is called.
|
||||
*/
|
||||
|
||||
#define GPIO_SW1 (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN3)
|
||||
#define GPIO_SW2 (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN2)
|
||||
#define GPIO_SW3 (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN4)
|
||||
#ifdef CONFIG_ARCH_DBDP11215
|
||||
# define GPIO_SW1 (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN3)
|
||||
# define GPIO_SW2 (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN2)
|
||||
# define GPIO_SW3 (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN4)
|
||||
#else /* CONFIG_ARCH_DBDP11212 */
|
||||
# define GPIO_SW1 (GPIO_INPUT|GPIO_INT|GPIO_PORTF|GPIO_PIN0)
|
||||
# define GPIO_SW2 (GPIO_INPUT|GPIO_INT|GPIO_PORTF|GPIO_PIN1)
|
||||
# define GPIO_SW3 (GPIO_INPUT|GPIO_INT|GPIO_PORTD|GPIO_PIN6)
|
||||
#endif
|
||||
|
||||
/* Change notification numbers:
|
||||
* RB3 -> CN5
|
||||
|
||||
@ -57,9 +57,11 @@
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/* The Sure PIC32MX has an SD slot connected on SPI2:
|
||||
|
||||
#ifdef CONFIG_ARCH_DBDP11215
|
||||
|
||||
/* The Sure DB_DP11215 PIC32 Storage Demo Board has an SD slot connected on SPI2:
|
||||
*
|
||||
* SPI
|
||||
* SCK2/PMA5/CN8/RG6 SCK SD connector SCK, FLASH (U1) SCK*
|
||||
* SDI2/PMA4/CN9/RG7 SDI SD connector DO, FLASH (U1) SO*
|
||||
* SDO2/PMA3/CN10/RG8 SDO SD connector DI, FLASH (U1) SI*
|
||||
@ -73,12 +75,51 @@
|
||||
* TDI/AN13/PMA10/RB13 SD_WD SD connector WD
|
||||
*/
|
||||
|
||||
#define GPIO_SD_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN11)
|
||||
#define GPIO_SD_CD (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN12)
|
||||
#define GPIO_SD_WD (GPIO_INPUT|GPIO_PORTB|GPIO_PIN13)
|
||||
# define PIC32_HAVE_SD 1
|
||||
|
||||
# define GPIO_SD_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN11)
|
||||
# define GPIO_SD_CD (GPIO_INPUT|GPIO_INT|GPIO_PORTB|GPIO_PIN12)
|
||||
# define GPIO_SD_WD (GPIO_INPUT|GPIO_PORTB|GPIO_PIN13)
|
||||
|
||||
/* The Sure DB_DP11215 PIC32 Storage Demo Board has pads an SOIC (Flash or
|
||||
* EEPROM) connected on SPI2, however, U4 is not populated on my board.
|
||||
*
|
||||
*
|
||||
* TMS/AN10/CVREFOUT/PMA13/RB10 UTIL_WP FLASH (U1) WP
|
||||
* SS2/PMA2/CN11/RG9 UTIL_CS FLASH (U1) CS
|
||||
*/
|
||||
|
||||
# undef PIC32_HAVE_SOIC
|
||||
|
||||
# define GPIO_SOIC_WP (GPIO_INPUT|GPIO_PORTB|GPIO_PIN10)
|
||||
# define GPIO_SOIC_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTG|GPIO_PIN0)
|
||||
|
||||
/* Change notification numbers -- Not available for SD_CD. */
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_ARCH_DBDP11212
|
||||
|
||||
/* The Sure DB-DP11212 PIC32 General Purpose Demo Board does not have an
|
||||
* SD slot.
|
||||
*/
|
||||
|
||||
# undef PIC32_HAVE_SD
|
||||
|
||||
/* The Sure DB-DP11212 PIC32 General Purpose Demo Board has an SOIC (Flash or
|
||||
* EEPROM) connected on SPI2:
|
||||
*
|
||||
*
|
||||
* TMS/AN10/PMA13/RB10 UTIL_WP FLASH (U4) WP
|
||||
* TDO/AN11/PMA12/RB11 UTIL_CS FLASH (U4) CS
|
||||
*/
|
||||
|
||||
# define PIC32_HAVE_SOIC 1
|
||||
|
||||
# define GPIO_SOIC_WP (GPIO_INPUT|GPIO_PORTB|GPIO_PIN10)
|
||||
# define GPIO_SOIC_CS (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTB|GPIO_PIN11)
|
||||
#endif
|
||||
|
||||
/* The following enable debug output from this file.
|
||||
*
|
||||
* CONFIG_DEBUG_SPI && CONFIG_DEBUG - Define to enable basic SPI debug
|
||||
@ -124,9 +165,16 @@ void weak_function pic32mx_spiinitialize(void)
|
||||
* write protect (WP) inputs.
|
||||
*/
|
||||
|
||||
#ifdef PIC32_HAVE_SD
|
||||
pic32mx_configgpio(GPIO_SD_CS);
|
||||
pic32mx_configgpio(GPIO_SD_CD);
|
||||
pic32mx_configgpio(GPIO_SD_WD);
|
||||
#endif
|
||||
|
||||
#ifdef PIC32_HAVE_SOIC
|
||||
pic32mx_configgpio(GPIO_SOIC_WP);
|
||||
pic32mx_configgpio(GPIO_SOIC_CS);
|
||||
#endif
|
||||
}
|
||||
|
||||
/************************************************************************************
|
||||
@ -161,32 +209,62 @@ void pic32mx_spi2select(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool se
|
||||
|
||||
/* The SD card chip select is pulled high and active low */
|
||||
|
||||
#ifdef PIC32_HAVE_SD
|
||||
if (devid == SPIDEV_MMCSD)
|
||||
{
|
||||
pic32mx_gpiowrite(GPIO_SD_CS, !selected);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef PIC32_HAVE_SOIC
|
||||
if (devid == SPIDEV_FLASH)
|
||||
{
|
||||
pic32mx_gpiowrite(GPIO_SOIC_CS, !selected);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
|
||||
uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
|
||||
{
|
||||
uint8_t ret = 0;
|
||||
|
||||
/* Card detect is pull up on-board. If a low value is sensed then the card must
|
||||
* be present.
|
||||
/* Card detect is pull up on-board. If a low value is sensed then the
|
||||
* card must be present.
|
||||
*/
|
||||
|
||||
if (!pic32mx_gpioread(GPIO_SD_CD))
|
||||
#ifdef PIC32_HAVE_SD
|
||||
if (devid == SPIDEV_MMCSD)
|
||||
{
|
||||
if (!pic32mx_gpioread(GPIO_SD_CD))
|
||||
{
|
||||
ret = SPI_STATUS_PRESENT;
|
||||
|
||||
/* It seems that a high value indicates the the card is write
|
||||
* protected.
|
||||
*/
|
||||
|
||||
if (pic32mx_gpioread(GPIO_SD_WD))
|
||||
{
|
||||
ret |= SPI_STATUS_WRPROTECTED;
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef PIC32_HAVE_SOIC
|
||||
if (devid == SPIDEV_FLASH)
|
||||
{
|
||||
ret = SPI_STATUS_PRESENT;
|
||||
|
||||
/* It seems that a high value indicatest the the card is write protected. */
|
||||
/* Write protect is indicated with a low value. */
|
||||
|
||||
if (pic32mx_gpioread(GPIO_SD_WD))
|
||||
if (pic32mx_gpioread(GPIO_SOIC_WP))
|
||||
{
|
||||
ret |= SPI_STATUS_WRPROTECTED;
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
||||
spivdbg("Returning %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
@ -56,7 +56,10 @@
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
/*
|
||||
/* The Sure DB_DP11215 PIC32 Storage Demo Board has a CP2102 PHY that is shared
|
||||
* between the USB and the UART-to-USB logic. That PHY must be programmed during
|
||||
* boot up for USB functionality (since the UART-to-USB is not populated).
|
||||
*
|
||||
* PIN NAME SIGNAL NOTES
|
||||
* ---- ------------------------------- -------------- ------------------------------
|
||||
* 11 AN5/C1IN+/Vbuson/CN7/RB5 Vbuson/AN5/RB5 To USB VBUS circuitry
|
||||
@ -64,9 +67,11 @@
|
||||
* 44 SCL1/IC3/PMCS2/PMA15/INT3/RD10 USB_OPT USB PHY
|
||||
*/
|
||||
|
||||
#define GPIO_USB_VBUSON (GPIO_INPUT|GPIO_PORTB|GPIO_PIN5)
|
||||
#define GPIO_USB_OPTEN (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTD|GPIO_PIN9)
|
||||
#define GPIO_USB_OPT (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTD|GPIO_PIN10)
|
||||
#ifdef CONFIG_ARCH_DBDP11215
|
||||
# define GPIO_USB_VBUSON (GPIO_INPUT|GPIO_PORTB|GPIO_PIN5)
|
||||
# define GPIO_USB_OPTEN (GPIO_OUTPUT|GPIO_VALUE_ZERO|GPIO_PORTD|GPIO_PIN9)
|
||||
# define GPIO_USB_OPT (GPIO_OUTPUT|GPIO_VALUE_ONE|GPIO_PORTD|GPIO_PIN10)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
@ -88,8 +93,10 @@ void weak_function pic32mx_usbdevinitialize(void)
|
||||
{
|
||||
/* Connect the PHY to the USB mini-B port. Order and timing matter! */
|
||||
|
||||
#ifdef CONFIG_ARCH_DBDP11215
|
||||
pic32mx_configgpio(GPIO_USB_OPTEN);
|
||||
pic32mx_configgpio(GPIO_USB_OPT);
|
||||
#endif
|
||||
|
||||
/* Notes from the Sure Electronics sample code:
|
||||
*
|
||||
|
||||
Loading…
Reference in New Issue
Block a user