diff --git a/ChangeLog b/ChangeLog index 7957e352cb..24312be5b0 100644 --- a/ChangeLog +++ b/ChangeLog @@ -6760,3 +6760,5 @@ kconfig-frontends tools (2014-3-3) * configs/olimex-strp11/nettest: Configuration converted to use the kconfig-frontends tools (2014-3-3) + * configs/eagle100/nettest: Configuration converted to use the + kconfig-frontends tools (2014-3-3). diff --git a/configs/eagle100/README.txt b/configs/eagle100/README.txt index 89ccfcea1c..6bc0ff5dfc 100644 --- a/configs/eagle100/README.txt +++ b/configs/eagle100/README.txt @@ -391,9 +391,33 @@ Where is one of the following: nettest: This configuration directory may be used to enable networking using the - LM3S6918's Ethernet controller. It uses examples/nettest to excercise the + LM3S6918's Ethernet controller. It uses examples/nettest to exercise the TCP/IP network. + NOTES: + + 1. This configuration uses the mconf-based configuration tool. To + change this configurations using that tool, you should: + + a. Build and install the kconfig-mconf tool. See nuttx/README.txt + and misc/tools/ + + b. Execute 'make menuconfig' in nuttx/ in order to start the + reconfiguration process. + + 2. As a consequence of (1), selection of toolchains differs from + the discussion above under GNU Toolchain Options. You should + *not* add the CROSSDEV setting on the make command line. Rather, + you should reconfigure and select the toolchain that you want + from the "System Type" menu. + + Eventually, all of the eagle100 configurations will be changed + to use the new configuration mechanism and at that time, the + above discussion will be corrected for all configurations. + + 3. This configuration is set to use Cygwin under Windows and the + CodeSourcery toolchain. That, however, is easily reconfigurable: + httpd: This builds the uIP web server example using the examples/uip application (for execution from FLASH). @@ -425,6 +449,9 @@ Where is one of the following: to use the new configuration mechanism and at that time, the above discussion will be corrected for all configurations. + 3. This configuration is set to use Cygwin under Windows and the + devkitARM toolchain. That, however, is easily reconfigurable: + nxflat: This builds the NXFLAT example at apps/examples/nxfalt. diff --git a/configs/eagle100/nettest/Make.defs b/configs/eagle100/nettest/Make.defs index 4b33930bde..fc2bce3b78 100644 --- a/configs/eagle100/nettest/Make.defs +++ b/configs/eagle100/nettest/Make.defs @@ -35,89 +35,76 @@ include ${TOPDIR}/.config include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs -# The default value for CROSSDEV can be overridden from the make command line: -# make -- Will build for the devkitARM toolchain -# make CROSSDEV=arm-eabi- -- Will build for the devkitARM toolchain -# make CROSSDEV=arm-none-eabi- -- Will build for the CodeSourcery toolchain -# make CROSSDEV=arm-nuttx-elf- -- Will build for the NuttX buildroot toolchain - -CROSSDEV = arm-eabi- -CC = $(CROSSDEV)gcc -CXX = $(CROSSDEV)g++ -CPP = $(CROSSDEV)gcc -E -LD = $(CROSSDEV)ld -AR = $(CROSSDEV)ar rcs -NM = $(CROSSDEV)nm -OBJCOPY = $(CROSSDEV)objcopy -OBJDUMP = $(CROSSDEV)objdump - -ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} -ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} - -ifeq ($(CROSSDEV),arm-nuttx-elf-) - MKDEP = $(TOPDIR)/tools/mkdeps.sh - ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft - ARCHINCLUDES = -I. -isystem $(TOPDIR)/include - ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx - ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script - MAXOPTIMIZATION = -Os +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mknulldeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" else - WINTOOL = y - DIRLINK = $(TOPDIR)/tools/copydir.sh - DIRUNLINK = $(TOPDIR)/tools/unlink.sh - MKDEP = $(TOPDIR)/tools/mknulldeps.sh - ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft - ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" - ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" - ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script}" - MAXOPTIMIZATION = -O2 + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps.sh + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/ld.script endif +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - ARCHOPTIMIZATION = -g + ARCHOPTIMIZATION = -g endif ifneq ($(CONFIG_DEBUG_NOOPT),y) - ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer endif -ARCHCFLAGS = -fno-builtin -ARCHCXXFLAGS = -fno-builtin -fno-exceptions -ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -ARCHWARNINGSXX = -Wall -Wshadow -ARCHDEFINES = -ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow +ARCHWARNINGSXX = -Wall -Wshadow +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 -CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) -CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) \ - $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe -CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) -CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -AFLAGS = $(CFLAGS) -D__ASSEMBLY__ +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ -NXFLATLDFLAGS1 = -r -d -warn-common -NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) \ - -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld \ - -no-check-sections -LDNXFLATFLAGS = -e main -s 2048 +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-pcrel.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 -OBJEXT = .o -LIBEXT = .a -EXEEXT = +OBJEXT = .o +LIBEXT = .a +EXEEXT = ifneq ($(CROSSDEV),arm-nuttx-elf-) - LDFLAGS += -nostartfiles -nodefaultlibs + LDFLAGS += -nostartfiles -nodefaultlibs endif ifeq ($(CONFIG_DEBUG_SYMBOLS),y) - LDFLAGS += -g + LDFLAGS += -g endif -HOSTCC = gcc -HOSTINCLUDES = -I. -HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe -HOSTLDFLAGS = +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe +HOSTLDFLAGS = diff --git a/configs/eagle100/nettest/appconfig b/configs/eagle100/nettest/appconfig deleted file mode 100644 index e5ff507b89..0000000000 --- a/configs/eagle100/nettest/appconfig +++ /dev/null @@ -1,43 +0,0 @@ -############################################################################ -# configs/eagle100/nettest/appconfig -# -# Copyright (C) 2011 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt -# -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ - -# Path to example in apps/examples containing the user_start entry point - -CONFIGURED_APPS += examples/nettest - - -# Networking support - -CONFIGURED_APPS += netutils/uiplib diff --git a/configs/eagle100/nettest/defconfig b/configs/eagle100/nettest/defconfig index 0cfcb7270a..3604d4ec2d 100644 --- a/configs/eagle100/nettest/defconfig +++ b/configs/eagle100/nettest/defconfig @@ -1,195 +1,310 @@ -############################################################################ -# configs/eagle100/nettest/defconfig # -# Copyright (C) 2009-2010, 2012 Gregory Nutt. All rights reserved. -# Author: Gregory Nutt +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration # -# Redistribution and use in source and binary forms, with or without -# modification, are permitted provided that the following conditions -# are met: -# -# 1. Redistributions of source code must retain the above copyright -# notice, this list of conditions and the following disclaimer. -# 2. Redistributions in binary form must reproduce the above copyright -# notice, this list of conditions and the following disclaimer in -# the documentation and/or other materials provided with the -# distribution. -# 3. Neither the name NuttX nor the names of its contributors may be -# used to endorse or promote products derived from this software -# without specific prior written permission. -# -# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS -# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT -# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS -# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE -# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, -# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, -# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS -# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED -# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT -# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN -# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE -# POSSIBILITY OF SUCH DAMAGE. -# -############################################################################ -# -# Architecture Selection -# -CONFIG_ARCH="arm" -CONFIG_ARCH_ARM=y -CONFIG_ARCH_CORTEXM3=y -CONFIG_ARCH_CHIP="lm" -CONFIG_ARCH_CHIP_LM=y -CONFIG_ARCH_CHIP_LM3S=y -CONFIG_ARCH_CHIP_LM3S6918=y -CONFIG_ARCH_BOARD="eagle100" -CONFIG_ARCH_BOARD_EAGLE100=y -CONFIG_BOARD_LOOPSPERMSEC=4531 -CONFIG_RAM_SIZE=65536 -CONFIG_RAM_START=0x20000000 -CONFIG_ARCH_IRQPRIO=y -CONFIG_ARCH_INTERRUPTSTACK=0 -CONFIG_ARCH_STACKDUMP=y -CONFIG_ARCH_LEDS=y -CONFIG_ARCH_CALIBRATION=n +CONFIG_NUTTX_NEWCONFIG=y # -# Disable support for interrupts on GPIOJ which does not -# exist on the LM3S6918. Additional interrupt support can be -# disabled if desired to reduce memory footprint. -CONFIG_LM_DISABLE_GPIOA_IRQS=n -CONFIG_LM_DISABLE_GPIOB_IRQS=n -CONFIG_LM_DISABLE_GPIOC_IRQS=n -CONFIG_LM_DISABLE_GPIOD_IRQS=n -CONFIG_LM_DISABLE_GPIOE_IRQS=n -CONFIG_LM_DISABLE_GPIOF_IRQS=n -CONFIG_LM_DISABLE_GPIOG_IRQS=n -CONFIG_LM_DISABLE_GPIOH_IRQS=n -CONFIG_LM_DISABLE_GPIOJ_IRQS=y +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +# CONFIG_HOST_LINUX is not set +# CONFIG_HOST_OSX is not set +CONFIG_HOST_WINDOWS=y +# CONFIG_HOST_OTHER is not set +# CONFIG_WINDOWS_NATIVE is not set +CONFIG_WINDOWS_CYGWIN=y +# CONFIG_WINDOWS_MSYS is not set +# CONFIG_WINDOWS_OTHER is not set # -# LM3S6918 specific serial device driver settings +# Build Configuration # -CONFIG_LM_UART0=y -CONFIG_LM_UART1=n -CONFIG_UART0_SERIAL_CONSOLE=y -CONFIG_UART1_SERIAL_CONSOLE=n -CONFIG_UART0_TXBUFSIZE=256 -CONFIG_UART1_TXBUFSIZE=256 -CONFIG_UART0_RXBUFSIZE=256 -CONFIG_UART1_RXBUFSIZE=256 -CONFIG_UART0_BAUD=115200 -CONFIG_UART1_BAUD=115200 -CONFIG_UART0_BITS=8 -CONFIG_UART1_BITS=8 -CONFIG_UART0_PARITY=0 -CONFIG_UART1_PARITY=0 -CONFIG_UART0_2STOP=0 -CONFIG_UART1_2STOP=0 +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_2PASS is not set # -# LM3S6918 specific SSI device driver settings +# Binary Output Formats # -CONFIG_SSI0_DISABLE=n -CONFIG_SSI1_DISABLE=y -CONFIG_SSI_POLLWAIT=y -#CONFIG_SSI_TXLIMIT=4 - -# -# LM3S6918 specific serial device driver settings -# -CONFIG_LM_ETHERNET=y -CONFIG_LM_ETHLEDS=n -CONFIG_LM_BOARDMAC=y -CONFIG_LM_ETHHDUPLEX=n -CONFIG_LM_ETHNOAUTOCRC=n -CONFIG_LM_ETHNOPAD=n -CONFIG_LM_MULTICAST=n -CONFIG_LM_PROMISCUOUS=n -CONFIG_LM_BADCRC=n -CONFIG_LM_DUMPPACKET=n - -# -# General build options -# -CONFIG_RRLOAD_BINARY=n -CONFIG_INTELHEX_BINARY=n -CONFIG_MOTOROLA_SREC=n +# CONFIG_RRLOAD_BINARY is not set +# CONFIG_INTELHEX_BINARY is not set +# CONFIG_MOTOROLA_SREC is not set CONFIG_RAW_BINARY=y # -# General OS setup +# Customize Header Files +# +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set + +# +# Debug Options # -CONFIG_USER_ENTRYPOINT="nettest_main" CONFIG_DEBUG=y -CONFIG_DEBUG_VERBOSE=n -CONFIG_DEBUG_SYMBOLS=n +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_ARCH_HAVE_HEAPCHECK is not set +# CONFIG_DEBUG_VERBOSE is not set + +# +# Subsystem Debug Options +# +# CONFIG_DEBUG_MM is not set +# CONFIG_DEBUG_SCHED is not set CONFIG_DEBUG_NET=y -CONFIG_MM_REGIONS=1 -CONFIG_ARCH_LOWPUTC=y +# CONFIG_DEBUG_FS is not set +# CONFIG_DEBUG_LIB is not set +# CONFIG_DEBUG_BINFMT is not set +# CONFIG_DEBUG_GRAPHICS is not set +# CONFIG_DEBUG_IRQ is not set +# CONFIG_DEBUG_STACK is not set + +# +# Driver Debug Options +# +# CONFIG_DEBUG_LEDS is not set +# CONFIG_DEBUG_ANALOG is not set +# CONFIG_DEBUG_GPIO is not set +# CONFIG_DEBUG_AUDIO is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +# CONFIG_ARCH_8051 is not set +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_RGMP is not set +# CONFIG_ARCH_SH is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_CALYPSO is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_IMX is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +CONFIG_ARCH_CHIP_LM=y +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_STM32 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +CONFIG_ARCH_CORTEXM3=y +# CONFIG_ARCH_CORTEXM4 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="lm" +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARCH_HAVE_FPU is not set +# CONFIG_ARCH_HAVE_MPU is not set +# CONFIG_DEBUG_HARDFAULT is not set + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_TOOLCHAIN_ATOLLIC is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDW is not set +CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYW=y +# CONFIG_ARMV7M_TOOLCHAIN_DEVKITARM is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL is not set +# CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIW is not set +# CONFIG_ARMV7M_TOOLCHAIN_RAISONANCE is not set + +# +# Stellaris Configuration Options +# +CONFIG_ARCH_CHIP_LM3S6918=y +# CONFIG_ARCH_CHIP_LM3S9B96 is not set +# CONFIG_ARCH_CHIP_LM3S6432 is not set +# CONFIG_ARCH_CHIP_LM3S6965 is not set +# CONFIG_ARCH_CHIP_LM3S8962 is not set +# CONFIG_ARCH_CHIP_LM4F120 is not set +CONFIG_ARCH_CHIP_LM3S=y +CONFIG_LM_HAVE_SSI1=y +# CONFIG_LM_REVA2 is not set + +# +# Stellaris Peripheral Support +# +CONFIG_LM_UART0=y +# CONFIG_LM_UART1 is not set +# CONFIG_LM_UART2 is not set +# CONFIG_SSI0_DISABLE is not set +CONFIG_SSI1_DISABLE=y +CONFIG_LM_ETHERNET=y +# CONFIG_LM_FLASH is not set + +# +# Disable GPIO Interrupts +# +# CONFIG_LM_DISABLE_GPIOA_IRQS is not set +# CONFIG_LM_DISABLE_GPIOB_IRQS is not set +# CONFIG_LM_DISABLE_GPIOC_IRQS is not set +# CONFIG_LM_DISABLE_GPIOD_IRQS is not set +# CONFIG_LM_DISABLE_GPIOE_IRQS is not set +# CONFIG_LM_DISABLE_GPIOF_IRQS is not set +# CONFIG_LM_DISABLE_GPIOG_IRQS is not set +# CONFIG_LM_DISABLE_GPIOH_IRQS is not set +CONFIG_LM_DISABLE_GPIOJ_IRQS=y + +# +# Stellaris Ethernet Configuration +# +# CONFIG_LM_ETHLEDS is not set +CONFIG_LM_BOARDMAC=y +# CONFIG_LM_ETHHDUPLEX is not set +# CONFIG_LM_ETHNOAUTOCRC is not set +# CONFIG_LM_ETHNOPAD is not set +# CONFIG_LM_MULTICAST is not set +# CONFIG_LM_PROMISCUOUS is not set +# CONFIG_LM_TIMESTAMP is not set +# CONFIG_LM_BADCRC is not set +# CONFIG_M3S_DUMPPACKET is not set + +# +# Stellaris SSI Configuration +# +CONFIG_SSI_POLLWAIT=y +CONFIG_SSI_TXLIMIT=4 +# CONFIG_NET_MULTICAST is not set + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_CUSTOM_STACK is not set +# CONFIG_ADDRENV is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +# CONFIG_ARCH_NAND_HWECC is not set +CONFIG_ARCH_IRQPRIO=y +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=4531 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=65536 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_EAGLE100=y +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="eagle100" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y + +# +# Board-Specific Options +# + +# +# RTOS Features +# +# CONFIG_BOARD_INITIALIZE is not set +CONFIG_MSEC_PER_TICK=10 +# CONFIG_SYSTEM_TIME64 is not set CONFIG_RR_INTERVAL=200 -CONFIG_SCHED_INSTRUMENTATION=n +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set CONFIG_TASK_NAME_SIZE=0 +# CONFIG_SCHED_HAVE_PARENT is not set +# CONFIG_JULIAN_TIME is not set CONFIG_START_YEAR=2009 CONFIG_START_MONTH=5 CONFIG_START_DAY=20 -CONFIG_JULIAN_TIME=n CONFIG_DEV_CONSOLE=y -CONFIG_DEV_LOWCONSOLE=y -CONFIG_MUTEX_TYPES=n -CONFIG_PRIORITY_INHERITANCE=n -CONFIG_SEM_PREALLOCHOLDERS=0 -CONFIG_SEM_NNESTPRIO=0 -CONFIG_FDCLONE_DISABLE=n -CONFIG_FDCLONE_STDIO=n +# CONFIG_MUTEX_TYPES is not set +# CONFIG_PRIORITY_INHERITANCE is not set +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set CONFIG_SDCLONE_DISABLE=y -CONFIG_NXFLAT=n - -# -# The following can be used to disable categories of -# APIs supported by the OS. If the compiler supports -# weak functions, then it should not be necessary to -# disable functions unless you want to restrict usage -# of those APIs. -# -# There are certain dependency relationships in these -# features. -# -# o mq_notify logic depends on signals to awaken tasks -# waiting for queues to become full or empty. -# o pthread_condtimedwait() depends on signals to wake -# up waiting tasks. -# -CONFIG_DISABLE_CLOCK=n -CONFIG_DISABLE_POSIX_TIMERS=n +# CONFIG_SCHED_WAITPID is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set +CONFIG_USER_ENTRYPOINT="nettest_main" +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_CLOCK is not set +# CONFIG_DISABLE_POSIX_TIMERS is not set CONFIG_DISABLE_PTHREAD=y -CONFIG_DISABLE_SIGNALS=n +# CONFIG_DISABLE_SIGNALS is not set CONFIG_DISABLE_MQUEUE=y -CONFIG_DISABLE_MOUNTPOINT=y CONFIG_DISABLE_ENVIRON=y -CONFIG_DISABLE_POLL=y # -# Misc libc settings +# Signal Numbers # -CONFIG_NOPRINTF_FIELDWIDTH=n - -# -# Allow for architecture optimized implementations -# -# The architecture can provide optimized versions of the -# following to improve system performance -# -CONFIG_ARCH_MEMCPY=n -CONFIG_ARCH_MEMCMP=n -CONFIG_ARCH_MEMMOVE=n -CONFIG_ARCH_MEMSET=n -CONFIG_ARCH_STRCMP=n -CONFIG_ARCH_STRCPY=n -CONFIG_ARCH_STRNCPY=n -CONFIG_ARCH_STRLEN=n -CONFIG_ARCH_STRNLEN=n -CONFIG_ARCH_BZERO=n +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 # # Sizes of configurable things (0 disables) @@ -200,134 +315,456 @@ CONFIG_NPTHREAD_KEYS=0 CONFIG_NFILE_DESCRIPTORS=8 CONFIG_NFILE_STREAMS=8 CONFIG_NAME_MAX=32 -CONFIG_STDIO_BUFFER_SIZE=0 -CONFIG_NUNGET_CHARS=0 CONFIG_PREALLOC_MQ_MSGS=0 CONFIG_MQ_MAXMSGSIZE=0 CONFIG_MAX_WDOGPARMS=4 CONFIG_PREALLOC_WDOGS=8 CONFIG_PREALLOC_TIMERS=8 -# -# Filesystem configuration -# -CONFIG_FS_FAT=n -CONFIG_FS_ROMFS=n - -# -# Maintain legacy build behavior (revisit) -# - -CONFIG_MMCSD=y -CONFIG_MMCSD_SPI=y -CONFIG_MTD=y - -# -# SPI-based MMC/SD driver -# -CONFIG_MMCSD_NSLOTS=1 -CONFIG_MMCSD_READONLY=n -CONFIG_MMCSD_SPICLOCK=12500000 - -# -# TCP/IP and UDP support via uIP -# -CONFIG_NET=y -CONFIG_NET_IPv6=n -CONFIG_NSOCKET_DESCRIPTORS=8 -CONFIG_NET_SOCKOPTS=y -CONFIG_NET_BUFSIZE=420 -CONFIG_NET_TCP=y -CONFIG_NET_TCP_CONNS=8 -CONFIG_NET_TCP_READAHEAD=y -CONFIG_NET_NTCP_READAHEAD_BUFFERS=8 -CONFIG_NET_TCPBACKLOG=n -CONFIG_NET_MAX_LISTENPORTS=8 -CONFIG_NET_UDP=n -CONFIG_NET_UDP_CHECKSUMS=y -#CONFIG_NET_UDP_CONNS=10 -CONFIG_NET_ICMP=y -CONFIG_NET_ICMP_PING=n -#CONFIG_NET_PINGADDRCONF=0 -CONFIG_NET_STATISTICS=n -#CONFIG_NET_RECEIVE_WINDOW= -#CONFIG_NET_ARPTAB_SIZE=8 -CONFIG_NET_BROADCAST=n - -# -# UIP Network Utilities -# -CONFIG_NET_DHCP_LIGHT=n -CONFIG_NET_RESOLV_ENTRIES=4 - -# -# Settings for examples/uip -# -CONFIG_EXAMPLES_UIP_IPADDR=0x0a000002 -CONFIG_EXAMPLES_UIP_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_UIP_NETMASK=0xffffff00 -CONFIG_EXAMPLES_UIP_DHCPC=n - -# -# Settings for examples/nettest -# -CONFIG_EXAMPLES_NETTEST_SERVER=n -CONFIG_EXAMPLES_NETTEST_PERFORMANCE=n -CONFIG_EXAMPLES_NETTEST_NOMAC=n -CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 -CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 -CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 -CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 - -# -# Settings for examples/ostest -# -CONFIG_EXAMPLES_OSTEST_LOOPS=1 -CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048 -CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3 - -# -# Settings for apps/nshlib -# -CONFIG_NSH_FILEIOSIZE=512 -CONFIG_NSH_STRERROR=n -CONFIG_NSH_LINELEN=64 -CONFIG_NSH_NESTDEPTH=3 -CONFIG_NSH_DISABLESCRIPT=n -CONFIG_NSH_DISABLEBG=n -CONFIG_NSH_ROMFSETC=n -CONFIG_NSH_CONSOLE=y -CONFIG_NSH_TELNET=n -CONFIG_NSH_ARCHINIT=n -CONFIG_NSH_IOBUFFER_SIZE=512 -CONFIG_NSH_DHCPC=n -CONFIG_NSH_NOMAC=n -CONFIG_NSH_IPADDR=0x0a000002 -CONFIG_NSH_DRIPADDR=0x0a000001 -CONFIG_NSH_NETMASK=0xffffff00 -CONFIG_NSH_ROMFSMOUNTPT="/etc" -CONFIG_NSH_INITSCRIPT="init.d/rcS" -CONFIG_NSH_ROMFSDEVNO=0 -CONFIG_NSH_ROMFSSECTSIZE=64 -CONFIG_NSH_FATDEVNO=1 -CONFIG_NSH_FATSECTSIZE=512 -CONFIG_NSH_FATNSECTORS=1024 -CONFIG_NSH_FATMOUNTPT="/tmp" - -# -# Architecture-specific NSH options -# -CONFIG_NSH_MMCSDSPIPORTNO=0 -CONFIG_NSH_MMCSDSLOTNO=0 -CONFIG_NSH_MMCSDMINOR=0 - # # Stack and heap information # -CONFIG_BOOT_RUNFROMFLASH=n -CONFIG_BOOT_COPYTORAM=n -CONFIG_CUSTOM_STACK=n CONFIG_IDLETHREAD_STACKSIZE=1024 CONFIG_USERMAIN_STACKSIZE=2048 CONFIG_PTHREAD_STACK_MIN=256 CONFIG_PTHREAD_STACK_DEFAULT=2048 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_LOOP is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_PWM is not set +# CONFIG_ARCH_HAVE_I2CRESET is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_I2S is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set +# CONFIG_LCD is not set +# CONFIG_MMCSD is not set +# CONFIG_MTD is not set +CONFIG_NETDEVICES=y + +# +# General Ethernet MAC Driver Options +# +# CONFIG_NETDEV_MULTINIC is not set +# CONFIG_NET_DUMPPACKET is not set + +# +# External Ethernet MAC Device Support +# +# CONFIG_NET_DM90x0 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_ENCX24J600 is not set +# CONFIG_NET_E1000 is not set +# CONFIG_NET_SLIP is not set +# CONFIG_NET_VNET is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +# CONFIG_SERCOMM_CONSOLE is not set +CONFIG_SERIAL=y +CONFIG_DEV_LOWCONSOLE=y +# CONFIG_16550_UART is not set +CONFIG_ARCH_HAVE_UART0=y + +# +# USART Configuration +# +CONFIG_MCU_SERIAL=y +# CONFIG_SERIAL_TIOCSERGSTRUCT is not set +CONFIG_UART0_SERIAL_CONSOLE=y +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# UART0 Configuration +# +CONFIG_UART0_RXBUFSIZE=256 +CONFIG_UART0_TXBUFSIZE=256 +CONFIG_UART0_BAUD=115200 +CONFIG_UART0_BITS=8 +CONFIG_UART0_PARITY=0 +CONFIG_UART0_2STOP=0 +# CONFIG_UART0_IFLOWCONTROL is not set +# CONFIG_UART0_OFLOWCONTROL is not set +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_WIRELESS is not set + +# +# System Logging Device Options +# + +# +# System Logging +# +# CONFIG_RAMLOG is not set + +# +# Networking Support +# +CONFIG_ARCH_HAVE_NET=y +# CONFIG_ARCH_HAVE_PHY is not set +CONFIG_NET=y +# CONFIG_NET_NOINTS is not set +# CONFIG_NET_MULTIBUFFER is not set +# CONFIG_NET_PROMISCUOUS is not set +CONFIG_NSOCKET_DESCRIPTORS=8 +CONFIG_NET_NACTIVESOCKETS=16 +CONFIG_NET_SOCKOPTS=y +# CONFIG_NET_SOLINGER is not set +CONFIG_NET_BUFSIZE=420 +# CONFIG_NET_TCPURGDATA is not set + +# +# TCP/IP Networking +# +CONFIG_NET_TCP=y +CONFIG_NET_TCP_CONNS=8 +CONFIG_NET_MAX_LISTENPORTS=8 +CONFIG_NET_TCP_READAHEAD=y +CONFIG_NET_TCP_READAHEAD_BUFSIZE=536 +CONFIG_NET_NTCP_READAHEAD_BUFFERS=8 +# CONFIG_NET_TCP_WRITE_BUFFERS is not set +CONFIG_NET_TCP_RECVDELAY=0 +# CONFIG_NET_TCPBACKLOG is not set +# CONFIG_NET_TCP_SPLIT is not set +# CONFIG_NET_SENDFILE is not set + +# +# UDP Networking +# +# CONFIG_NET_UDP is not set +CONFIG_NET_ICMP=y +# CONFIG_NET_ICMP_PING is not set +# CONFIG_NET_PINGADDRCONF is not set +# CONFIG_NET_IGMP is not set +# CONFIG_NET_STATISTICS is not set +CONFIG_NET_RECEIVE_WINDOW=536 +CONFIG_NET_ARPTAB_SIZE=16 +# CONFIG_NET_ARP_IPIN is not set +# CONFIG_NET_ROUTE is not set + +# +# File Systems +# + +# +# File system configuration +# +CONFIG_DISABLE_MOUNTPOINT=y +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_FS_READABLE is not set +# CONFIG_FS_WRITABLE is not set +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_PROCFS is not set + +# +# System Logging +# +# CONFIG_SYSLOG_ENABLE is not set +# CONFIG_SYSLOG is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +# CONFIG_MM_MULTIHEAP is not set +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Binary Formats +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_BUILTIN is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# +CONFIG_STDIO_BUFFER_SIZE=0 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=0 +# CONFIG_LIBM is not set +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIB_RAND_ORDER=1 +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set +CONFIG_ARCH_LOWPUTC=y +CONFIG_LIB_SENDFILE_BUFSIZE=512 +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_ARCH_OPTIMIZED_FUNCTIONS is not set + +# +# Non-standard Library Support +# +# CONFIG_SCHED_WORKQUEUE is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +# CONFIG_HAVE_CXX is not set + +# +# Application Configuration +# + +# +# Built-In Applications +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CAN is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_LCDRW is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +CONFIG_EXAMPLES_NETTEST=y +# CONFIG_EXAMPLES_NETTEST_SERVER is not set +# CONFIG_EXAMPLES_NETTEST_PERFORMANCE is not set +# CONFIG_EXAMPLES_NETTEST_NOMAC is not set +CONFIG_EXAMPLES_NETTEST_IPADDR=0x0a000002 +CONFIG_EXAMPLES_NETTEST_DRIPADDR=0x0a000001 +CONFIG_EXAMPLES_NETTEST_NETMASK=0xffffff00 +CONFIG_EXAMPLES_NETTEST_CLIENTIP=0x0a000001 +# CONFIG_EXAMPLES_NRF24L01TERM is not set +# CONFIG_EXAMPLES_NSH is not set +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXCONSOLE is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXFLAT is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PASHELLO is not set +# CONFIG_EXAMPLES_PIPE is not set +# CONFIG_EXAMPLES_POLL is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_QENCODER is not set +# CONFIG_EXAMPLES_RGMP is not set +# CONFIG_EXAMPLES_ROMFS is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_THTTPD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_UDP is not set +# CONFIG_EXAMPLES_UIP is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_USBTERM is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WGET is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# Network Utilities +# + +# +# Networking Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_DHCPD is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_FTPD is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set +# CONFIG_NETUTILS_TELNETD is not set +# CONFIG_NETUTILS_TFTPC is not set +# CONFIG_NETUTILS_THTTPD is not set +CONFIG_NETUTILS_UIPLIB=y +# CONFIG_NETUTILS_WEBCLIENT is not set +# CONFIG_NETUTILS_WEBSERVER is not set +# CONFIG_NETUTILS_XMLRPC is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# NSH Library +# +# CONFIG_NSH_LIBRARY is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# + +# +# USB CDC/ACM Device Commands +# + +# +# USB Composite Device Commands +# + +# +# Custom Free Memory Command +# +# CONFIG_SYSTEM_FREE is not set + +# +# I2C tool +# + +# +# INI File Parser +# +# CONFIG_SYSTEM_INIFILE is not set + +# +# FLASH Program Installation +# +# CONFIG_SYSTEM_INSTALL is not set + +# +# FLASH Erase-all Command +# + +# +# NxPlayer media player library / command Line +# +# CONFIG_SYSTEM_NXPLAYER is not set + +# +# RAM test +# +# CONFIG_SYSTEM_RAMTEST is not set + +# +# readline() +# +# CONFIG_SYSTEM_READLINE is not set + +# +# Power Off +# +# CONFIG_SYSTEM_POWEROFF is not set + +# +# RAMTRON +# +# CONFIG_SYSTEM_RAMTRON is not set + +# +# SD Card +# +# CONFIG_SYSTEM_SDCARD is not set + +# +# Sysinfo +# +# CONFIG_SYSTEM_SYSINFO is not set + +# +# USB Monitor +# + +# +# EMACS-like Command Line Editor +# +# CONFIG_SYSTEM_CLE is not set + +# +# VI Work-Alike Editor +# +# CONFIG_SYSTEM_VI is not set + +# +# Stack Monitor +# + +# +# USB Mass Storage Device Commands +# + +# +# Zmodem Commands +# +# CONFIG_SYSTEM_ZMODEM is not set diff --git a/configs/eagle100/nettest/setenv.sh b/configs/eagle100/nettest/setenv.sh index 37cc7735cf..5d12d78cfc 100755 --- a/configs/eagle100/nettest/setenv.sh +++ b/configs/eagle100/nettest/setenv.sh @@ -50,7 +50,8 @@ fi # This is the Cygwin path to the location where I installed the CodeSourcery # toolchain under windows. You will also have to edit this if you install # the CodeSourcery toolchain in any other location -export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +# export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery G++ Lite/bin" +export TOOLCHAIN_BIN="/cygdrive/c/Program Files (x86)/CodeSourcery/Sourcery_CodeBench_Lite_for_ARM_EABI/bin" # This is the Cygwin path to the location where I build the buildroot # toolchain.