sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAMA5 Ethernet: Add support for PHY interrupts

Browse Source
This commit is contained in:
Gregory Nutt 2013-09-15 12:24:42 -06:00
parent 9468590596
commit ed7c7a25e7
9 changed files with 339 additions and 145 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
ChangeLog
View File

@ -5560,3 +5560,9 @@
STM32 files (2013-9-13).
6.31 2013-xx-xx Gregory Nutt <gnutt@nuttx.org>
* nuttx/fs/romfs/fs_romfsutil.c: Back out part of a recent
ROMFS change (2013-9-14).
* configs/sama5d3x-ek/src/sam_ethernet.c: Add support for
PHY interrupts (2013-9-15).

194
arch/arm/src/sama5/sam_emac.c
View File

@ -61,7 +61,7 @@
#include "chip.h"
#include "sam_pio.h"
#include "sam_emac.h"
#include "sam_ethernet.h"
#include <arch/board/board.h>
@ -181,7 +181,7 @@
#define SAM_TXTIMEOUT (60*CLK_TCK)
/* PHY reset/configuration delays in milliseconds */
/* PHY reset/configuration delays in milliseconds */
#define PHY_RESET_DELAY (65)
#define PHY_CONFIG_DELAY (1000)
@ -1008,9 +1008,9 @@ static int sam_recvframe(FAR struct sam_emac_s *priv)
(rxdesc->rdes0 & EMAC_RDES0_LS) == 0)
{
priv->rxcurr = rxdesc;
priv->segments = 1;
priv->segments = 1;
}
/* Check if this is an intermediate segment in the frame */
else if (((rxdesc->rdes0 & EMAC_RDES0_LS) == 0)&&
@ -1022,7 +1022,7 @@ static int sam_recvframe(FAR struct sam_emac_s *priv)
/* Otherwise, it is the last segment in the frame */
else
{
{
priv->segments++;
/* Check if the there is only one segment in the frame */
@ -1105,7 +1105,7 @@ static int sam_recvframe(FAR struct sam_emac_s *priv)
nllvdbg("rxhead: %p rxcurr: %p segments: %d\n",
priv->rxhead, priv->rxcurr, priv->segments);
return -EAGAIN;
return -EAGAIN;
}
/****************************************************************************
@ -1512,7 +1512,7 @@ static void sam_polltimer(int argc, uint32_t arg, ...)
if (dev->d_buf)
{
/* Update TCP timing states and poll uIP for new XMIT data.
/* Update TCP timing states and poll uIP for new XMIT data.
*/
(void)uip_timer(dev, sam_uiptxpoll, SAM_POLLHSEC);
@ -1540,7 +1540,7 @@ static void sam_polltimer(int argc, uint32_t arg, ...)
*
* Description:
* NuttX Callback: Bring up the Ethernet interface when an IP address is
* provided
* provided
*
* Parameters:
* dev - Reference to the NuttX driver state structure
@ -1632,7 +1632,7 @@ static int sam_ifdown(struct uip_driver_s *dev)
* Function: sam_txavail
*
* Description:
* Driver callback invoked when new TX data is available. This is a
* Driver callback invoked when new TX data is available. This is a
* stimulus perform an out-of-cycle poll and, thereby, reduce the TX
* latency.
*
@ -1682,7 +1682,7 @@ static int sam_txavail(struct uip_driver_s *dev)
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be added
* mac - The MAC address to be added
*
* Returned Value:
* None
@ -1716,7 +1716,7 @@ static int sam_addmac(struct uip_driver_s *dev, FAR const uint8_t *mac)
*
* Parameters:
* dev - Reference to the NuttX driver state structure
* mac - The MAC address to be removed
* mac - The MAC address to be removed
*
* Returned Value:
* None
@ -1760,7 +1760,7 @@ static void sam_txdescinit(FAR struct sam_emac_s *priv)
{
struct emac_txdesc_s *txdesc;
int i;
/* priv->txhead will point to the first, available TX descriptor in the chain.
* Set the priv->txhead pointer to the first descriptor in the table.
*/
@ -1775,7 +1775,7 @@ static void sam_txdescinit(FAR struct sam_emac_s *priv)
priv->txtail = NULL;
priv->inflight = 0;
/* Initialize each TX descriptor */
/* Initialize each TX descriptor */
for (i = 0; i < CONFIG_SAMA5_EMAC_NTXDESC; i++)
{
@ -1783,8 +1783,8 @@ static void sam_txdescinit(FAR struct sam_emac_s *priv)
/* Set Second Address Chained bit */
txdesc->tdes0 = EMAC_TDES0_TCH;
txdesc->tdes0 = EMAC_TDES0_TCH;
#ifdef CHECKSUM_BY_HARDWARE
/* Enable the checksum insertion for the TX frames */
@ -1796,7 +1796,7 @@ static void sam_txdescinit(FAR struct sam_emac_s *priv)
*/
txdesc->tdes2 = 0;
/* Initialize the next descriptor with the Next Descriptor Polling Enable */
if (i < (CONFIG_SAMA5_EMAC_NTXDESC-1))
@ -1813,7 +1813,7 @@ static void sam_txdescinit(FAR struct sam_emac_s *priv)
* to the first descriptor base address
*/
txdesc->tdes3 = (uint32_t)priv->txtable;
txdesc->tdes3 = (uint32_t)priv->txtable;
}
}
@ -1841,7 +1841,7 @@ static void sam_rxdescinit(FAR struct sam_emac_s *priv)
{
struct emac_rxdesc_s *rxdesc;
int i;
/* priv->rxhead will point to the first, RX descriptor in the chain.
* This will be where we receive the first incomplete frame.
*/
@ -1855,7 +1855,7 @@ static void sam_rxdescinit(FAR struct sam_emac_s *priv)
priv->rxcurr = NULL;
priv->segments = 0;
/* Initialize each TX descriptor */
/* Initialize each TX descriptor */
for (i = 0; i < CONFIG_SAMA5_EMAC_NRXDESC; i++)
{
@ -1869,12 +1869,12 @@ static void sam_rxdescinit(FAR struct sam_emac_s *priv)
* RX desc receive interrupt
*/
rxdesc->rdes1 = EMAC_RDES1_RCH | (uint32_t)CONFIG_SAMA5_EMAC_BUFSIZE;
rxdesc->rdes1 = EMAC_RDES1_RCH | (uint32_t)CONFIG_SAMA5_EMAC_BUFSIZE;
/* Set Buffer1 address pointer */
rxdesc->rdes2 = (uint32_t)&priv->rxbuffer[i*CONFIG_SAMA5_EMAC_BUFSIZE];
/* Initialize the next descriptor with the Next Descriptor Polling Enable */
if (i < (CONFIG_SAMA5_EMAC_NRXDESC-1))
@ -1891,7 +1891,7 @@ static void sam_rxdescinit(FAR struct sam_emac_s *priv)
* to the first descriptor base address
*/
rxdesc->rdes3 = (uint32_t)priv->rxtable;
rxdesc->rdes3 = (uint32_t)priv->rxtable;
}
}
@ -2048,7 +2048,7 @@ static inline int sam_dm9161(FAR struct sam_emac_s *priv)
/* Bit 8 of the DSCR register is zero, then the DM9161 has not selected RMII.
* If RMII is not selected, then reset the MCU to recover.
*/
else if ((phyval & (1 << 8)) == 0)
{
up_systemreset();
@ -2175,7 +2175,7 @@ static int sam_phyinit(FAR struct sam_emac_s *priv)
ndbg("Timed out waiting for auto-negotiation\n");
return -ETIMEDOUT;
}
/* Read the result of the auto-negotiation from the PHY-specific register */
ret = sam_phyread(CONFIG_SAMA5_PHYADDR, CONFIG_SAMA5_PHYSR, &phyval);
@ -2331,16 +2331,23 @@ static inline void sam_selectrmii(void)
static inline void sam_ethgpioconfig(FAR struct sam_emac_s *priv)
{
/* Configure GPIO pins to support Ethernet */
/* Configure PIO pins to support EMAC */
/* Configure EMAC PIO pins common to both MII and RMII */
#if defined(CONFIG_SAMA5_MII) || defined(CONFIG_SAMA5_RMII)
sam_configpio(PIO_EMAC_TX0);
sam_configpio(PIO_EMAC_TX1);
sam_configpio(PIO_EMAC_RX0);
sam_configpio(PIO_EMAC_RX1);
sam_configpio(PIO_EMAC_TXEN);
sam_configpio(PIO_EMAC_CRSDV);
sam_configpio(PIO_EMAC_RXER);
sam_configpio(PIO_EMAC_REFCK);
/* MDC and MDIO are common to both modes */
sam_configgpio(GPIO_EMAC_MDC);
sam_configgpio(GPIO_EMAC_MDIO);
/* Set up the MII interface */
sam_configpio(PIO_EMAC_MDC);
sam_configpio(PIO_EMAC_MDIO);
#if defined(CONFIG_SAMA5_MII)
@ -2348,60 +2355,11 @@ static inline void sam_ethgpioconfig(FAR struct sam_emac_s *priv)
sam_selectmii();
/* Provide clocking via MCO, MCO1 or MCO2:
*
* "MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
* clock (through a configurable prescaler) on PA8 pin."
*
* "MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or
* PLLI2S clock (through a configurable prescaler) on PC9 pin."
*/
/* Provide clocking */
#warning Missing logic
# if defined(CONFIG_SAMA5_MII_MCO1)
/* Configure MC01 to drive the PHY. Board logic must provide MC01 clocking
* info.
*/
sam_configgpio(GPIO_MCO1);
sam_mco1config(BOARD_CFGR_MC01_SOURCE, BOARD_CFGR_MC01_DIVIDER);
# elif defined(CONFIG_SAMA5_MII_MCO2)
/* Configure MC02 to drive the PHY. Board logic must provide MC02 clocking
* info.
*/
sam_configgpio(GPIO_MCO2);
sam_mco2config(BOARD_CFGR_MC02_SOURCE, BOARD_CFGR_MC02_DIVIDER);
# elif defined(CONFIG_SAMA5_MII_MCO)
/* Setup MCO pin for alternative usage */
sam_configgpio(GPIO_MCO);
sam_mcoconfig(BOARD_CFGR_MCO_SOURCE);
# endif
/* MII interface pins (17):
*
* MII_TX_CLK, MII_TXD[3:0], MII_TX_EN, MII_RX_CLK, MII_RXD[3:0], MII_RX_ER,
* MII_RX_DV, MII_CRS, MII_COL, MDC, MDIO
*/
sam_configgpio(GPIO_EMAC_MII_COL);
sam_configgpio(GPIO_EMAC_MII_CRS);
sam_configgpio(GPIO_EMAC_MII_RXD0);
sam_configgpio(GPIO_EMAC_MII_RXD1);
sam_configgpio(GPIO_EMAC_MII_RXD2);
sam_configgpio(GPIO_EMAC_MII_RXD3);
sam_configgpio(GPIO_EMAC_MII_RX_CLK);
sam_configgpio(GPIO_EMAC_MII_RX_DV);
sam_configgpio(GPIO_EMAC_MII_RX_ER);
sam_configgpio(GPIO_EMAC_MII_TXD0);
sam_configgpio(GPIO_EMAC_MII_TXD1);
sam_configgpio(GPIO_EMAC_MII_TXD2);
sam_configgpio(GPIO_EMAC_MII_TXD3);
sam_configgpio(GPIO_EMAC_MII_TX_CLK);
sam_configgpio(GPIO_EMAC_MII_TX_EN);
/* Set up the RMII interface. */
#elif defined(CONFIG_SAMA5_RMII)
@ -2410,59 +2368,10 @@ static inline void sam_ethgpioconfig(FAR struct sam_emac_s *priv)
sam_selectrmii();
/* Provide clocking via MCO, MCO1 or MCO2:
*
* "MCO1 (microcontroller clock output), used to output HSI, LSE, HSE or PLL
* clock (through a configurable prescaler) on PA8 pin."
*
* "MCO2 (microcontroller clock output), used to output HSE, PLL, SYSCLK or
* PLLI2S clock (through a configurable prescaler) on PC9 pin."
*/
# if defined(CONFIG_SAMA5_RMII_MCO1)
/* Configure MC01 to drive the PHY. Board logic must provide MC01 clocking
* info.
*/
sam_configgpio(GPIO_MCO1);
sam_mco1config(BOARD_CFGR_MC01_SOURCE, BOARD_CFGR_MC01_DIVIDER);
# elif defined(CONFIG_SAMA5_RMII_MCO2)
/* Configure MC02 to drive the PHY. Board logic must provide MC02 clocking
* info.
*/
sam_configgpio(GPIO_MCO2);
sam_mco2config(BOARD_CFGR_MC02_SOURCE, BOARD_CFGR_MC02_DIVIDER);
# elif defined(CONFIG_SAMA5_RMII_MCO)
/* Setup MCO pin for alternative usage */
sam_configgpio(GPIO_MCO);
sam_mcoconfig(BOARD_CFGR_MCO_SOURCE);
# endif
/* RMII interface pins (7):
*
* RMII_TXD[1:0], RMII_TX_EN, RMII_RXD[1:0], RMII_CRS_DV, MDC, MDIO,
* RMII_REF_CLK
*/
sam_configgpio(GPIO_EMAC_RMII_CRS_DV);
sam_configgpio(GPIO_EMAC_RMII_REF_CLK);
sam_configgpio(GPIO_EMAC_RMII_RXD0);
sam_configgpio(GPIO_EMAC_RMII_RXD1);
sam_configgpio(GPIO_EMAC_RMII_TXD0);
sam_configgpio(GPIO_EMAC_RMII_TXD1);
/* sam_configgpio(GPIO_EMAC_RMII_TX_CLK); not needed? */
sam_configgpio(GPIO_EMAC_RMII_TX_EN);
/* Provide clocking */
#warning Missing logic
#endif
#endif
/* Enable pulse-per-second (PPS) output signal */
sam_configgpio(GPIO_EMAC_PPS_OUT);
}
/****************************************************************************
@ -2560,7 +2469,16 @@ static void sam_macaddress(FAR struct sam_emac_s *priv)
dev->d_mac.ether_addr_octet[4], dev->d_mac.ether_addr_octet[5]);
/* Set the MAC address */
#warning Missing logic
regval = (uint32_t)dev->d_mac.ether_addr_octet[0] |,
(uint32_t)dev->d_mac.ether_addr_octet[1] << 8 |,
(uint32_t)dev->d_mac.ether_addr_octet[2] << 16 |,
(uint32_t)dev->d_mac.ether_addr_octet[3] << 24 |,
sam_putreg(priv, SAM_GMAC_SAB1, regval);
regval = (uint32_t)dev->d_mac.ether_addr_octet[4] |,
(uint32_t)dev->d_mac.ether_addr_octet[5] << 8 |,
sam_putreg(priv, SAM_GMAC_SAT1, regval);
}
/****************************************************************************
@ -2587,18 +2505,18 @@ static int sam_macenable(FAR struct sam_emac_s *priv)
sam_macaddress(priv);
/* Enable transmit state machine of the MAC for transmission on the MII */
/* Enable transmit state machine of the MAC for transmission on the MII */
#warning Missing logic
/* Flush Transmit FIFO */
#warning Missing logic
/* Enable receive state machine of the MAC for reception from the MII */
/* Enable receive state machine of the MAC for reception from the MII */
#warning Missing logic
/* Start DMA transmission */
#warning Missing logic
/* Start DMA reception */
#warning Missing logic
@ -2719,7 +2637,7 @@ int sam_emac_initialize(void)
priv->txpoll = wd_create(); /* Create periodic poll timer */
priv->txtimeout = wd_create(); /* Create TX timeout timer */
/* Configure GPIO pins to support Ethernet */
/* Configure PIO pins to support EMAC */
sam_ethgpioconfig(priv);

4
arch/arm/src/sama5/sam_eth.c → arch/arm/src/sama5/sam_ethernet.c
View File

@ -1,5 +1,5 @@
/****************************************************************************
* arch/arm/src/sama5/sam_eth.c
* arch/arm/src/sama5/sam_ethernet.c
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
@ -39,7 +39,7 @@
#include <nuttx/config.h>
#include <debug.h>
#include "sam_emac.h"
#include "sam_ethernet.h"
#ifdef CONFIG_NET

9
arch/arm/src/sama5/sam_emac.h → arch/arm/src/sama5/sam_ethernet.h
View File

@ -1,5 +1,5 @@
/************************************************************************************
* arch/arm/src/sama5/sam_eth.h
* arch/arm/src/sama5/sam_ethernet.h
*
* Copyright (C) 2013 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
@ -33,8 +33,8 @@
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_SAMA5_SAM_EMAC_H
#define __ARCH_ARM_SRC_SAMA5_SAM_EMAC_H
#ifndef __ARCH_ARM_SRC_SAMA5_SAM_ETHERNET_H
#define __ARCH_ARM_SRC_SAMA5_SAM_ETHERNET_H
/************************************************************************************
* Included Files
@ -44,6 +44,7 @@
#include "chip.h"
#include "chip/sam_emac.h"
#include "chip/sam_gmac.h"
/************************************************************************************
* Pre-processor Definitions
@ -139,5 +140,5 @@ int sam_phy_boardinitialize(int intf);
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_SAMA5_SAM_EMAC_H */
#endif /* __ARCH_ARM_SRC_SAMA5_SAM_ETHERNET_H */

13
configs/sama5d3x-ek/include/board.h
View File

@ -182,6 +182,19 @@ extern "C" {
void sam_boardinitialize(void);
/************************************************************************************
* Name: sam_phyirq
*
* Description:
* This function may be called to register an interrupt handler that will be
* called when an interrupt is received from a PHY.
*
************************************************************************************/
#if defined(CONFIG_NET) && (defined(CONFIG_SAMA5_EMAC) || defined(CONFIG_SAMA5_GMAC))
xcpt_t sam_phyirq(int intf, xcpt_t irqhandler);
#endif
/************************************************************************************
* Name: sam_ledinit, sam_setled, and sam_setleds
*

8
configs/sama5d3x-ek/src/Makefile
View File

@ -94,6 +94,14 @@ CSRCS += sam_usb.c
endif
endif
ifeq ($(CONFIG_SAMA5_EMAC),y)
CSRCS += sam_ethernet.c
else
ifeq ($(CONFIG_SAMA5_GMAC),y)
CSRCS += sam_ethernet.c
endif
endif
ifeq ($(CONFIG_NSH_ARCHINIT),y)
CSRCS += sam_nsh.c
endif

14
configs/sama5d3x-ek/src/sam_boot.c
View File

@ -44,7 +44,7 @@
#include "sama5d3x-ek.h"
/************************************************************************************
* Definitions
* Pre-processor Definitions
************************************************************************************/
/************************************************************************************
@ -103,6 +103,18 @@ void sam_boardinitialize(void)
}
#endif
/* Configure board resources to support networkingif the 1) networking is enabled,
* 2) the EMAC or GMAC module is enabled, and 2) the weak function
* sam_netinitialize() has been brought into the build.
*/
#ifdef HAVE_NETWORK
if (sam_netinitialize)
{
sam_netinitialize();
}
#endif
#ifdef CONFIG_ARCH_LEDS
/* Configure on-board LEDs if LED support has been selected. */

170
configs/sama5d3x-ek/src/sam_ethernet.c Normal file
View File

@ -0,0 +1,170 @@
/************************************************************************************
* configs/sama5d3x-ek/src/sam_ethernet.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/irq.h>
#include "sam_pio.h"
#include "sam_ethernet.h"
#ifdef HAVE_NETWORK
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: sam_netinitialize
*
* Description:
* Configure board resources to support networking.
*
************************************************************************************/
void weak_function sam_netinitialize(void)
{
#ifdef CONFIG_SAMA4_EMAC
/* Ethernet 10/100 (EMAC) Port
*
* The main board contains a MICREL PHY device (KSZ8051) operating at 10/100 Mbps.
* The board supports MII and RMII interface modes.
*
* The two independent PHY devices embedded on CM and MB boards are connected to
* independent RJ-45 connectors with built-in magnetic and status LEDs.
*
* At the De-Assertion of Reset:
* PHY ADD[2:0]:001
* CONFIG[2:0]:001,Mode:RMII
* Duplex Mode:Half Duplex
* Isolate Mode:Disable
* Speed Mode:100Mbps
* Nway Auto-Negotiation:Enable
*
* The KSZ8051 PHY interrtup is available on PE30 INT_ETH1
*/
sam_configpio(PIO_INT_ETH1);
#endif
#ifdef CONFIG_SAMA4_GMAC
/* Tri-Speed Ethernet PHY
*
* The SAMA5D3 series-CM board is equipped with a MICREL PHY devices (MICREL
* KSZ9021/31) operating at 10/100/1000 Mbps. The board supports RGMII interface
* mode. The Ethernet interface consists of 4 pairs of low voltage differential
* pair signals designated from GRX± and GTx± plus control signals for link
* activity indicators. These signals can be used to connect to a 10/100/1000
* BaseT RJ45 connector integrated on the main board.
*
* The KSZ9021/31 interrupt is available on PB35 INT_GETH0
*/
sam_configpio(PIO_INT_ETH0);
#endif
}
/************************************************************************************
* Name: sam_phyirq
*
* Description:
* This function may be called to register an interrupt handler that will be
* called when an interrupt is received from a PHY.
*
************************************************************************************/
xcpt_t sam_phyirq(int intf, xcpt_t irqhandler)
{
irqstate_t flags;
xcpt_t *handler;
xcpt_t oldhandler;
int irq;
#ifdef CONFIG_SAMA5_EMAC
if (intf == EMAC_INTF)
{
handler = &g_emac_handler;
irq = IRQ_INT_ETH1;
}
else
#endif
#ifdef CONFIG_SAMA5_GMAC
if (intf == GMAC_INTF)
{
handler = &g_gmac_handler;
irq = IRQ_INT_ETH0;
}
else
#endif
{
ndbg("Unsupported interface: %d\n", intf);
return NULL;
}
/* Disable interrupts until we are done. This guarantees that the
* following operations are atomic.
*/
flags = irqsave();
/* Get the old button interrupt handler and save the new one */
oldhandler = *handler;
*handler = irqhandler;
/* Configure the interrupt */
sam_pioirq(irq);
(void)irq_attach(irq, irqhandler);
sam_pioirqenable(irq);
/* Return the old button handler (so that it can be restored) */
return oldhandler;
}
#endif /* HAVE_NETWORK */

66
configs/sama5d3x-ek/src/sama5d3x-ek.h
View File

@ -61,6 +61,7 @@
#define HAVE_USBHOST 1
#define HAVE_USBDEV 1
#define HAVE_USBMONITOR 1
#define HAVE_NETWORK 1
/* HSMCI */
/* Can't support MMC/SD if the card interface(s) are not enable */
@ -251,6 +252,12 @@
# undef HAVE_USBMONITOR
#endif
/* Networking */
#if !defined(CONFIG_NET) || (!defined(CONFIG_SAMA5_EMAC) && !defined(CONFIG_SAMA5_GMAC))
# undef HAVE_NETWORK
#endif
/* LEDs *****************************************************************************/
/* There are two LEDs on the SAMA5D3 series-CM board that can be controlled
* by software. A blue LED is controlled via PIO pins. A red LED normally
@ -410,6 +417,53 @@
#define IRQ_USBBC_VBUS_OVERCURRENT \
SAM_IRQ_PD28
/* Ethernet */
#ifdef CONFIG_SAMA4_EMAC
/* ETH1: Ethernet 10/100 (EMAC) Port
*
* The main board contains a MICREL PHY device (KSZ8051) operating at 10/100 Mbps.
* The board supports MII and RMII interface modes.
*
* The two independent PHY devices embedded on CM and MB boards are connected to
* independent RJ-45 connectors with built-in magnetic and status LEDs.
*
* At the De-Assertion of Reset:
* PHY ADD[2:0]:001
* CONFIG[2:0]:001,Mode:RMII
* Duplex Mode:Half Duplex
* Isolate Mode:Disable
* Speed Mode:100Mbps
* Nway Auto-Negotiation:Enable
*
* The KSZ8051 PHY interrtup is available on PE30 INT_ETH1
*/
#define PIO_INT_ETH1 (PIO_INPUT | PIO_CFG_PULLUP | PIO_CFG_DEGLITCH | \
PIO_INT_BOTHEDGES | PIO_PORT_PIOE | PIO_PIN30)
#define IRQ_INT_ETH1 SAM_IRQ_PE30
#endif
#ifdef CONFIG_SAMA4_GMAC
/* ETH0: Tri-Speed Ethernet PHY
*
* The SAMA5D3 series-CM board is equipped with a MICREL PHY devices (MICREL
* KSZ9021/31) operating at 10/100/1000 Mbps. The board supports RGMII interface
* mode. The Ethernet interface consists of 4 pairs of low voltage differential
* pair signals designated from GRX± and GTx± plus control signals for link
* activity indicators. These signals can be used to connect to a 10/100/1000
* BaseT RJ45 connector integrated on the main board.
*
* The KSZ9021/31 interrupt is available on PB35 INT_GETH0
*/
#define PIO_INT_ETH0 (PIO_INPUT | PIO_CFG_PULLUP | PIO_CFG_DEGLITCH | \
PIO_INT_BOTHEDGES | PIO_PORT_PIOB | PIO_PIN25)
#define IRQ_INT_ETH0 SAM_IRQ_PB25
#endif
/* SPI Chip Selects *****************************************************************/
/* Both the Ronetix and Embest versions of the SAMAD3x CPU modules include an
* Atmel AT25DF321A, 32-megabit, 2.7-volt SPI serial flash. The SPI
@ -580,6 +634,18 @@ void weak_function sam_usbinitialize(void);
int sam_usbhost_initialize(void);
#endif
/************************************************************************************
* Name: sam_netinitialize
*
* Description:
* Configure board resources to support networking.
*
************************************************************************************/
#ifdef HAVE_NETWORK
void weak_function sam_netinitialize(void);
#endif
/************************************************************************************
* Name: up_ledinit
************************************************************************************/