diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index a15c01d7f6..44fd420d7b 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -397,6 +397,23 @@ config AT45DB_PWRSAVE endif # MTD_AT45DB +config MTD_IS25XP + bool "SPI-based IS25XP FLASH" + default n + select SPI + +if MTD_IS25XP + +config IS25XP_SPIMODE + int "IS25 SPI Mode" + default 0 + +config IS25XP_SPIFREQUENCY + int "IS25 SPI Frequency" + default 20000000 + +endif # MTD_IS25XP + config MTD_M25P bool "SPI-based M25P FLASH" default n @@ -496,7 +513,7 @@ config MTD_N25QXXX default n ---help--- Support the N25Q016A, N25Q032A, N25Q064A, N25Q128A, N25Q256A - + if MTD_N25QXXX diff --git a/drivers/mtd/Make.defs b/drivers/mtd/Make.defs index 1d1ba6d26b..e8516288e6 100644 --- a/drivers/mtd/Make.defs +++ b/drivers/mtd/Make.defs @@ -112,6 +112,10 @@ ifeq ($(CONFIG_MTD_N25QXXX),y) CSRCS += n25qxxx.c endif +ifeq ($(CONFIG_MTD_IS25XP),y) +CSRCS += is25xp.c +endif + ifeq ($(CONFIG_MTD_SMART),y) ifeq ($(CONFIG_FS_SMARTFS),y) CSRCS += smart.c diff --git a/drivers/mtd/is25xp.c b/drivers/mtd/is25xp.c new file mode 100644 index 0000000000..78caf46f0e --- /dev/null +++ b/drivers/mtd/is25xp.c @@ -0,0 +1,1005 @@ +/************************************************************************************ + * drivers/mtd/is25xp.c + * Driver for SPI-based IS25LPxx parts 32MBit and larger. + * + * Copyright (C) 2016 Marten Svanfeldt. All rights reserved. + * + * Copyright (C) 2009-2011, 2013 Gregory Nutt. All rights reserved. + * Author: Ken Pettit + * + * Copied from / based on m25px.c and sst25.c drivers written by + * Gregory Nutt + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * 3. Neither the name NuttX nor the names of its contributors may be + * used to endorse or promote products derived from this software + * without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS + * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE + * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, + * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS + * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED + * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN + * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + * POSSIBILITY OF SUCH DAMAGE. + * + ************************************************************************************/ + +/************************************************************************************ + * Included Files + ************************************************************************************/ + +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +/************************************************************************************ + * Pre-processor Definitions + ************************************************************************************/ +/* Configuration ********************************************************************/ +/* Per the data sheet, IS25xP parts can be driven with either SPI mode 0 (CPOL=0 and + * CPHA=0) or mode 3 (CPOL=1 and CPHA=1). So you may need to specify + * CONFIG_IS25XP_SPIMODE to select the best mode for your device. If + * CONFIG_IS25XP_SPIMODE is not defined, mode 0 will be used. + */ + +#ifndef CONFIG_IS25XP_SPIMODE +# define CONFIG_IS25XP_SPIMODE SPIDEV_MODE0 +#endif + +/* SPI Frequency. May be up to 50MHz. */ + +#ifndef CONFIG_IS25XP_SPIFREQUENCY +# define CONFIG_IS25XP_SPIFREQUENCY 20000000 +#endif + + +/* IS25 Registers *******************************************************************/ +/* Indentification register values */ + +#define IS25_MANUFACTURER 0x9d +#define IS25_MEMORY_TYPE 0x60 + +/* IS25LP064 capacity is 8,388,608 bytes: + * (2,048 sectors) * (4,096 bytes per sector) + * (32,768 pages) * (256 bytes per page) + */ +#define IS25_IS25LP064_CAPACITY 0x17 +#define IS25_IS25LP064_SECTOR_SHIFT 12 /* Sector size 1 << 12 = 4,096 */ +#define IS25_IS25LP064_NSECTORS 2048 +#define IS25_IS25LP064_PAGE_SHIFT 8 /* Page size 1 << 8 = 256 */ +#define IS25_IS25LP064_NPAGES 32768 + +/* IS25LP128 capacity is 16,777,216 bytes: + * (4,096 sectors) * (4,096 bytes per sector) + * (65,536 pages) * (256 bytes per page) + */ +#define IS25_IS25LP128_CAPACITY 0x18 +#define IS25_IS25LP128_SECTOR_SHIFT 12 /* Sector size 1 << 12 = 4,096 */ +#define IS25_IS25LP128_NSECTORS 4096 +#define IS25_IS25LP128_PAGE_SHIFT 8 /* Page size 1 << 8 = 256 */ +#define IS25_IS25LP128_NPAGES 65536 + + +/* Instructions */ +/* Command Value N Description Addr Dummy Data */ +#define IS25_WREN 0x06 /* 1 Write Enable 0 0 0 */ +#define IS25_WRDI 0x04 /* 1 Write Disable 0 0 0 */ +#define IS25_RDID 0x9f /* 1 Read Identification 0 0 1-3 */ +#define IS25_RDSR 0x05 /* 1 Read Status Register 0 0 >=1 */ +//#define IS25_EWSR 0x50 /* 1 Write enable status 0 0 0 */ +#define IS25_WRSR 0x01 /* 1 Write Status Register 0 0 1 */ +#define IS25_READ 0x03 /* 1 Read Data Bytes 3 0 >=1 */ +#define IS25_FAST_READ 0x0b /* 1 Higher speed read 3 1 >=1 */ +#define IS25_PP 0x02 /* 1 Page Program 3 0 1-256 */ +#define IS25_SE 0x20 /* 1 Sector Erase 3 0 0 */ +#define IS25_BE32 0x52 /* 2 32K Block Erase 3 0 0 */ +#define IS25_BE64 0xD8 /* 2 64K Block Erase 3 0 0 */ +#define IS25_CER 0xC7 /* 1 Chip Erase 0 0 0 */ + +/* NOTE 1: All parts. + * NOTE 2: In IS25XP terminology, 0x52 and 0xd8 are block erase and 0x20 + * is a sector erase. Block erase provides a faster way to erase + * multiple 4K sectors at once. + */ + +/* Status register bit definitions */ + +#define IS25_SR_WIP (1 << 0) /* Bit 0: Write in progress bit */ +#define IS25_SR_WEL (1 << 1) /* Bit 1: Write enable latch bit */ +#define IS25_SR_BP_SHIFT (2) /* Bits 2-5: Block protect bits */ +#define IS25_SR_BP_MASK (15 << IS25_SR_BP_SHIFT) +# define IS25_SR_BP_NONE (0 << IS25_SR_BP_SHIFT) /* Unprotected */ +# define IS25_SR_BP_UPPER128th (1 << IS25_SR_BP_SHIFT) /* Upper 128th */ +# define IS25_SR_BP_UPPER64th (2 << IS25_SR_BP_SHIFT) /* Upper 64th */ +# define IS25_SR_BP_UPPER32nd (3 << IS25_SR_BP_SHIFT) /* Upper 32nd */ +# define IS25_SR_BP_UPPER16th (4 << IS25_SR_BP_SHIFT) /* Upper 16th */ +# define IS25_SR_BP_UPPER8th (5 << IS25_SR_BP_SHIFT) /* Upper 8th */ +# define IS25_SR_BP_UPPERQTR (6 << IS25_SR_BP_SHIFT) /* Upper quarter */ +# define IS25_SR_BP_UPPERHALF (7 << IS25_SR_BP_SHIFT) /* Upper half */ +# define IS25_SR_BP_ALL (8 << IS25_SR_BP_SHIFT) /* All sectors */ +#define IS25_SR_QE (1 << 6) /* Bit 6: Quad (QSPI) enable bit */ +#define IS25_SR_SRWD (1 << 7) /* Bit 7: Status register write protect */ + +#define IS25_DUMMY 0xa5 + +/************************************************************************************ + * Private Types + ************************************************************************************/ + +/* This type represents the state of the MTD device. The struct mtd_dev_s + * must appear at the beginning of the definition so that you can freely + * cast between pointers to struct mtd_dev_s and struct is25xp_dev_s. + */ + +struct is25xp_dev_s +{ + struct mtd_dev_s mtd; /* MTD interface */ + FAR struct spi_dev_s *dev; /* Saved SPI interface instance */ + uint8_t sectorshift; /* 12 */ + uint8_t pageshift; /* 8 */ + uint16_t nsectors; /* 2,048 or 4,096 */ + uint32_t npages; /* 32,768 or 65,536 */ + uint8_t lastwaswrite; /* Indicates if last operation was write */ +}; + +/************************************************************************************ + * Private Function Prototypes + ************************************************************************************/ + +/* Helpers */ + +static void is25xp_lock(FAR struct spi_dev_s *dev); +static inline void is25xp_unlock(FAR struct spi_dev_s *dev); +static inline int is25xp_readid(struct is25xp_dev_s *priv); +static void is25xp_waitwritecomplete(struct is25xp_dev_s *priv); +static void is25xp_writeenable(struct is25xp_dev_s *priv); +static inline void is25xp_sectorerase(struct is25xp_dev_s *priv, off_t offset, uint8_t type); +static inline int is25xp_bulkerase(struct is25xp_dev_s *priv); +static inline void is25xp_pagewrite(struct is25xp_dev_s *priv, FAR const uint8_t *buffer, + off_t offset); + +/* MTD driver methods */ + +static int is25xp_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks); +static ssize_t is25xp_bread(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR uint8_t *buf); +static ssize_t is25xp_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, + size_t nblocks, FAR const uint8_t *buf); +static ssize_t is25xp_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, + FAR uint8_t *buffer); +#ifdef CONFIG_MTD_BYTE_WRITE +static ssize_t is25xp_write(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, + FAR const uint8_t *buffer); +#endif +static int is25xp_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg); + +/************************************************************************************ + * Private Data + ************************************************************************************/ + +/************************************************************************************ + * Private Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: is25xp_lock + ************************************************************************************/ + +static void is25xp_lock(FAR struct spi_dev_s *dev) +{ + /* On SPI busses where there are multiple devices, it will be necessary to + * lock SPI to have exclusive access to the busses for a sequence of + * transfers. The bus should be locked before the chip is selected. + * + * This is a blocking call and will not return until we have exclusiv access to + * the SPI buss. We will retain that exclusive access until the bus is unlocked. + */ + + (void)SPI_LOCK(dev, true); + + /* After locking the SPI bus, the we also need call the setfrequency, setbits, and + * setmode methods to make sure that the SPI is properly configured for the device. + * If the SPI buss is being shared, then it may have been left in an incompatible + * state. + */ + + SPI_SETMODE(dev, CONFIG_IS25XP_SPIMODE); + SPI_SETBITS(dev, 8); + (void)SPI_SETFREQUENCY(dev, CONFIG_IS25XP_SPIFREQUENCY); +} + +/************************************************************************************ + * Name: is25xp_unlock + ************************************************************************************/ + +static inline void is25xp_unlock(FAR struct spi_dev_s *dev) +{ + (void)SPI_LOCK(dev, false); +} + +/************************************************************************************ + * Name: is25xp_readid + ************************************************************************************/ + +static inline int is25xp_readid(struct is25xp_dev_s *priv) +{ + uint16_t manufacturer; + uint16_t memory; + uint16_t capacity; + + fvdbg("priv: %p\n", priv); + + /* Lock the SPI bus, configure the bus, and select this FLASH part. */ + + is25xp_lock(priv->dev); + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send the "Read ID (RDID)" command and read the first three ID bytes */ + + (void)SPI_SEND(priv->dev, IS25_RDID); + manufacturer = SPI_SEND(priv->dev, IS25_DUMMY); + memory = SPI_SEND(priv->dev, IS25_DUMMY); + capacity = SPI_SEND(priv->dev, IS25_DUMMY); + + /* Deselect the FLASH and unlock the bus */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + is25xp_unlock(priv->dev); + + fvdbg("manufacturer: %02x memory: %02x capacity: %02x\n", + manufacturer, memory, capacity); + + /* Check for a valid manufacturer and memory type */ + + if (manufacturer == IS25_MANUFACTURER && memory == IS25_MEMORY_TYPE) + { + /* Okay.. is it a FLASH capacity that we understand? */ + + if (capacity == IS25_IS25LP064_CAPACITY) + { + /* Save the FLASH geometry */ + + priv->sectorshift = IS25_IS25LP064_SECTOR_SHIFT; + priv->nsectors = IS25_IS25LP064_NSECTORS; + priv->pageshift = IS25_IS25LP064_PAGE_SHIFT; + priv->npages = IS25_IS25LP064_NPAGES; + return OK; + } + else if (capacity == IS25_IS25LP128_CAPACITY) + { + /* Save the FLASH geometry */ + + priv->sectorshift = IS25_IS25LP128_SECTOR_SHIFT; + priv->nsectors = IS25_IS25LP128_NSECTORS; + priv->pageshift = IS25_IS25LP128_PAGE_SHIFT; + priv->npages = IS25_IS25LP128_NPAGES; + return OK; + } + } + + return -ENODEV; +} + +/************************************************************************************ + * Name: is25xp_waitwritecomplete + ************************************************************************************/ + +static void is25xp_waitwritecomplete(struct is25xp_dev_s *priv) +{ + uint8_t status; + + /* No need to check if no write / erase was done */ + +#if 0 + if (!priv->lastwaswrite) + return; +#endif + + /* Are we the only device on the bus? */ + +#ifdef CONFIG_SPI_OWNBUS + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Read Status Register (RDSR)" command */ + + (void)SPI_SEND(priv->dev, IS25_RDSR); + + /* Loop as long as the memory is busy with a write cycle */ + + do + { + /* Send a dummy byte to generate the clock needed to shift out the status */ + + status = SPI_SEND(priv->dev, IS25_DUMMY); + } + while ((status & IS25_SR_WIP) != 0); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + +#else + + /* Loop as long as the memory is busy with a write cycle */ + + do + { + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Read Status Register (RDSR)" command */ + + (void)SPI_SEND(priv->dev, IS25_RDSR); + + /* Send a dummy byte to generate the clock needed to shift out the status */ + + status = SPI_SEND(priv->dev, IS25_DUMMY); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + + /* Given that writing could take up to few tens of milliseconds, and erasing + * could take more. The following short delay in the "busy" case will allow + * other peripherals to access the SPI bus. + */ + + if ((status & IS25_SR_WIP) != 0) + { + is25xp_unlock(priv->dev); + usleep(1000); + is25xp_lock(priv->dev); + } + } + while ((status & IS25_SR_WIP) != 0); + +#endif + + priv->lastwaswrite = false; + + fvdbg("Complete\n"); +} + +/************************************************************************************ + * Name: is25xp_writeenable + ************************************************************************************/ + +static void is25xp_writeenable(struct is25xp_dev_s *priv) +{ + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Write Enable (WREN)" command */ + + (void)SPI_SEND(priv->dev, IS25_WREN); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Enabled\n"); +} + +/************************************************************************************ + * Name: is25xp_unprotect + ************************************************************************************/ + +static void is25xp_unprotect(struct is25xp_dev_s *priv) +{ + /* Make writeable */ + + is25xp_writeenable(priv); + + /* Send "Write status (WRSR)" */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + SPI_SEND(priv->dev, IS25_WRSR); + + /* Followed by the new status value */ + + SPI_SEND(priv->dev, 0); + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); +} + +/************************************************************************************ + * Name: is25xp_sectorerase + ************************************************************************************/ + +static void is25xp_sectorerase(struct is25xp_dev_s *priv, off_t sector, uint8_t type) +{ + off_t offset; + + offset = sector << priv->sectorshift; + + fvdbg("sector: %08lx\n", (long)sector); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + is25xp_waitwritecomplete(priv); + + /* Send write enable instruction */ + + is25xp_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send the "Sector Erase (SE)" or Sub-Sector Erase (SSE) instruction + * that was passed in as the erase type. + */ + + (void)SPI_SEND(priv->dev, type); + + /* Send the sector offset high byte first. For all of the supported + * parts, the sector number is completely contained in the first byte + * and the values used in the following two bytes don't really matter. + */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + priv->lastwaswrite = true; + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Erased\n"); +} + +/************************************************************************************ + * Name: is25xp_bulkerase + ************************************************************************************/ + +static inline int is25xp_bulkerase(struct is25xp_dev_s *priv) +{ + fvdbg("priv: %p\n", priv); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + is25xp_waitwritecomplete(priv); + + /* Send write enable instruction */ + + is25xp_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send the "Chip Erase (CER)" instruction */ + + (void)SPI_SEND(priv->dev, IS25_CER); + + /* Deselect the FLASH */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + is25xp_waitwritecomplete(priv); + + fvdbg("Return: OK\n"); + return OK; +} + +/************************************************************************************ + * Name: is25xp_pagewrite + ************************************************************************************/ + +static inline void is25xp_pagewrite(struct is25xp_dev_s *priv, FAR const uint8_t *buffer, + off_t page) +{ + off_t offset = page << priv->pageshift; + + fvdbg("page: %08lx offset: %08lx\n", (long)page, (long)offset); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + is25xp_waitwritecomplete(priv); + + /* Enable the write access to the FLASH */ + + is25xp_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Page Program (PP)" command */ + + (void)SPI_SEND(priv->dev, IS25_PP); + + /* Send the page offset high byte first. */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + + /* Then write the specified number of bytes */ + + SPI_SNDBLOCK(priv->dev, buffer, 1 << priv->pageshift); + priv->lastwaswrite = true; + + /* Deselect the FLASH: Chip Select high */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Written\n"); +} + +/************************************************************************************ + * Name: is25xp_bytewrite + ************************************************************************************/ + +#ifdef CONFIG_MTD_BYTE_WRITE +static inline void is25xp_bytewrite(struct is25xp_dev_s *priv, FAR const uint8_t *buffer, + off_t offset, uint16_t count) +{ + fvdbg("offset: %08lx count:%d\n", (long)offset, count); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + is25xp_waitwritecomplete(priv); + + /* Enable the write access to the FLASH */ + + is25xp_writeenable(priv); + + /* Select this FLASH part */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Page Program (PP)" command */ + + (void)SPI_SEND(priv->dev, IS25_PP); + + /* Send the page offset high byte first. */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + + /* Then write the specified number of bytes */ + + SPI_SNDBLOCK(priv->dev, buffer, count); + priv->lastwaswrite = true; + + /* Deselect the FLASH: Chip Select high */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + fvdbg("Written\n"); +} +#endif + +/************************************************************************************ + * Name: is25xp_erase + ************************************************************************************/ + +static int is25xp_erase(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks) +{ + FAR struct is25xp_dev_s *priv = (FAR struct is25xp_dev_s *)dev; + size_t blocksleft = nblocks; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + /* Lock access to the SPI bus until we complete the erase */ + + is25xp_lock(priv->dev); + while (blocksleft > 0) + { + size_t sectorboundry; + size_t blkper; + + /* We will erase in either 4K sectors or 32K or 64K blocks depending + * on the largest unit we can use given the startblock and nblocks. + * This will reduce erase time (in the event we have partitions + * enabled and are doing a bulk erase which is translated into + * a block erase operation). + */ + + /* Test for 64K alignment */ + + blkper = 64 / 4; + sectorboundry = (startblock + blkper - 1) / blkper; + sectorboundry *= blkper; + + /* If we are on a sector boundry and have at least a full sector + * of blocks left to erase, then we can do a full sector erase. + */ + + if (startblock == sectorboundry && blocksleft >= blkper) + { + /* Do a 64k block erase */ + + is25xp_sectorerase(priv, startblock, IS25_BE64); + startblock += blkper; + blocksleft -= blkper; + continue; + } + + /* Test for 32K block alignment */ + + blkper = 32 / 4; + sectorboundry = (startblock + blkper - 1) / blkper; + sectorboundry *= blkper; + + if (startblock == sectorboundry && blocksleft >= blkper) + { + /* Do a 32k block erase */ + + is25xp_sectorerase(priv, startblock, IS25_BE32); + startblock += blkper; + blocksleft -= blkper; + continue; + } + else + { + /* Just do a sector erase */ + + is25xp_sectorerase(priv, startblock, IS25_SE); + startblock++; + blocksleft--; + continue; + } + } + + is25xp_unlock(priv->dev); + return (int)nblocks; +} + +/************************************************************************************ + * Name: is25xp_bread + ************************************************************************************/ + +static ssize_t is25xp_bread(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, + FAR uint8_t *buffer) +{ + FAR struct is25xp_dev_s *priv = (FAR struct is25xp_dev_s *)dev; + ssize_t nbytes; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + /* On this device, we can handle the block read just like the byte-oriented read */ + + nbytes = is25xp_read(dev, startblock << priv->pageshift, nblocks << priv->pageshift, buffer); + if (nbytes > 0) + { + return nbytes >> priv->pageshift; + } + + return (int)nbytes; +} + +/************************************************************************************ + * Name: is25xp_bwrite + ************************************************************************************/ + +static ssize_t is25xp_bwrite(FAR struct mtd_dev_s *dev, off_t startblock, size_t nblocks, + FAR const uint8_t *buffer) +{ + FAR struct is25xp_dev_s *priv = (FAR struct is25xp_dev_s *)dev; + size_t blocksleft = nblocks; + size_t pagesize = 1 << priv->pageshift; + + fvdbg("startblock: %08lx nblocks: %d\n", (long)startblock, (int)nblocks); + + /* Lock the SPI bus and write each page to FLASH */ + + is25xp_lock(priv->dev); + while (blocksleft-- > 0) + { + is25xp_pagewrite(priv, buffer, startblock); + buffer += pagesize; + startblock++; + } + + is25xp_unlock(priv->dev); + return nblocks; +} + +/************************************************************************************ + * Name: is25xp_read + ************************************************************************************/ + +static ssize_t is25xp_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, + FAR uint8_t *buffer) +{ + FAR struct is25xp_dev_s *priv = (FAR struct is25xp_dev_s *)dev; + + fvdbg("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes); + + /* Wait for any preceding write to complete. We could simplify things by + * perform this wait at the end of each write operation (rather than at + * the beginning of ALL operations), but have the wait first will slightly + * improve performance. + */ + + if (priv->lastwaswrite) + { + is25xp_waitwritecomplete(priv); + } + + /* Lock the SPI bus and select this FLASH part */ + + is25xp_lock(priv->dev); + SPI_SELECT(priv->dev, SPIDEV_FLASH, true); + + /* Send "Read from Memory " instruction */ + + (void)SPI_SEND(priv->dev, IS25_READ); + + /* Send the page offset high byte first. */ + + (void)SPI_SEND(priv->dev, (offset >> 16) & 0xff); + (void)SPI_SEND(priv->dev, (offset >> 8) & 0xff); + (void)SPI_SEND(priv->dev, offset & 0xff); + + /* Then read all of the requested bytes */ + + SPI_RECVBLOCK(priv->dev, buffer, nbytes); + + /* Deselect the FLASH and unlock the SPI bus */ + + SPI_SELECT(priv->dev, SPIDEV_FLASH, false); + is25xp_unlock(priv->dev); + fvdbg("return nbytes: %d\n", (int)nbytes); + return nbytes; +} + +/************************************************************************************ + * Name: is25xp_write + ************************************************************************************/ + +#ifdef CONFIG_MTD_BYTE_WRITE +static ssize_t is25xp_write(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes, + FAR const uint8_t *buffer) +{ + FAR struct is25xp_dev_s *priv = (FAR struct is25xp_dev_s *)dev; + int startpage; + int endpage; + int count; + int index; + int pagesize; + int bytestowrite; + + fvdbg("offset: %08lx nbytes: %d\n", (long)offset, (int)nbytes); + + /* We must test if the offset + count crosses one or more pages + * and perform individual writes. The devices can only write in + * page increments. + */ + + startpage = offset / (1 << priv->pageshift); + endpage = (offset + nbytes) / (1 << priv->pageshift); + + if (startpage == endpage) + { + /* All bytes within one programmable page. Just do the write. */ + + is25xp_bytewrite(priv, buffer, offset, nbytes); + } + else + { + /* Write the 1st partial-page */ + + count = nbytes; + pagesize = (1 << priv->pageshift); + bytestowrite = pagesize - (offset & (pagesize-1)); + is25xp_bytewrite(priv, buffer, offset, bytestowrite); + + /* Update offset and count */ + + offset += bytestowrite; + count -= bytestowrite; + index = bytestowrite; + + /* Write full pages */ + + while (count >= pagesize) + { + is25xp_bytewrite(priv, &buffer[index], offset, pagesize); + + /* Update offset and count */ + + offset += pagesize; + count -= pagesize; + index += pagesize; + } + + /* Now write any partial page at the end */ + + if (count > 0) + { + is25xp_bytewrite(priv, &buffer[index], offset, count); + } + + priv->lastwaswrite = true; + } + + return nbytes; +} +#endif /* CONFIG_MTD_BYTE_WRITE */ + +/************************************************************************************ + * Name: is25xp_ioctl + ************************************************************************************/ + +static int is25xp_ioctl(FAR struct mtd_dev_s *dev, int cmd, unsigned long arg) +{ + FAR struct is25xp_dev_s *priv = (FAR struct is25xp_dev_s *)dev; + int ret = -EINVAL; /* Assume good command with bad parameters */ + + fvdbg("cmd: %d \n", cmd); + + switch (cmd) + { + case MTDIOC_GEOMETRY: + { + FAR struct mtd_geometry_s *geo = (FAR struct mtd_geometry_s *)((uintptr_t)arg); + if (geo) + { + /* Populate the geometry structure with information need to know + * the capacity and how to access the device. + * + * NOTE: that the device is treated as though it where just an array + * of fixed size blocks. That is most likely not true, but the client + * will expect the device logic to do whatever is necessary to make it + * appear so. + */ + + geo->blocksize = (1 << priv->pageshift); + geo->erasesize = (1 << priv->sectorshift); + geo->neraseblocks = priv->nsectors; + + ret = OK; + + fvdbg("blocksize: %d erasesize: %d neraseblocks: %d\n", + geo->blocksize, geo->erasesize, geo->neraseblocks); + } + } + break; + + case MTDIOC_BULKERASE: + { + /* Erase the entire device */ + + is25xp_lock(priv->dev); + ret = is25xp_bulkerase(priv); + is25xp_unlock(priv->dev); + } + break; + + case MTDIOC_XIPBASE: + default: + ret = -ENOTTY; /* Bad command */ + break; + } + + fvdbg("return %d\n", ret); + return ret; +} + +/************************************************************************************ + * Public Functions + ************************************************************************************/ + +/************************************************************************************ + * Name: is25xp_initialize + * + * Description: + * Create an initialize MTD device instance. MTD devices are not registered + * in the file system, but are created as instances that can be bound to + * other functions (such as a block or character driver front end). + * + ************************************************************************************/ + +FAR struct mtd_dev_s *is25xp_initialize(FAR struct spi_dev_s *dev) +{ + FAR struct is25xp_dev_s *priv; + int ret; + + fvdbg("dev: %p\n", dev); + + /* Allocate a state structure (we allocate the structure instead of using + * a fixed, static allocation so that we can handle multiple FLASH devices. + * The current implementation would handle only one FLASH part per SPI + * device (only because of the SPIDEV_FLASH definition) and so would have + * to be extended to handle multiple FLASH parts on the same SPI bus. + */ + + priv = (FAR struct is25xp_dev_s *)kmm_zalloc(sizeof(struct is25xp_dev_s)); + if (priv) + { + /* Initialize the allocated structure. (unsupported methods were + * nullified by kmm_zalloc). + */ + + priv->mtd.erase = is25xp_erase; + priv->mtd.bread = is25xp_bread; + priv->mtd.bwrite = is25xp_bwrite; + priv->mtd.read = is25xp_read; +#ifdef CONFIG_MTD_BYTE_WRITE + priv->mtd.write = is25xp_write; +#endif + priv->mtd.ioctl = is25xp_ioctl; + priv->dev = dev; + priv->lastwaswrite = false; + + /* Deselect the FLASH */ + + SPI_SELECT(dev, SPIDEV_FLASH, false); + + /* Identify the FLASH chip and get its capacity */ + + ret = is25xp_readid(priv); + if (ret != OK) + { + /* Unrecognized! Discard all of that work we just did and return NULL */ + + fdbg("Unrecognized\n"); + kmm_free(priv); + priv = NULL; + } + else + { + /* Make sure that the FLASH is unprotected so that we can write into it */ + + is25xp_unprotect(priv); + } + } + + /* Register the MTD with the procfs system if enabled */ + +#ifdef CONFIG_MTD_REGISTRATION + mtd_register(&priv->mtd, "is25xp"); +#endif + + /* Return the implementation-specific state structure as the MTD device */ + + fvdbg("Return %p\n", priv); + return (FAR struct mtd_dev_s *)priv; +} diff --git a/include/nuttx/mtd/mtd.h b/include/nuttx/mtd/mtd.h index 8d1ee6db70..786fb75c79 100644 --- a/include/nuttx/mtd/mtd.h +++ b/include/nuttx/mtd/mtd.h @@ -412,6 +412,16 @@ void at24c_uninitialize(FAR struct mtd_dev_s *mtd); FAR struct mtd_dev_s *at25_initialize(FAR struct spi_dev_s *dev); +/**************************************************************************** + * Name: is25xp + * + * Description: + * Initializes the driver for SPI-based IS25xP FLASH + * + ****************************************************************************/ + +FAR struct mtd_dev_s *is25xp_initialize(FAR struct spi_dev_s *dev); + /**************************************************************************** * Name: m25p_initialize *