arch/mips/src/pic32mx/pic32mx_spi.c: Fix syslog formats

This commit is contained in:
YAMAMOTO Takashi 2020-12-05 13:51:45 +09:00 committed by Xiang Xiao
parent 326b217ef4
commit efde691052

View File

@ -40,6 +40,7 @@
#include <nuttx/config.h>
#include <sys/types.h>
#include <inttypes.h>
#include <stdint.h>
#include <stdbool.h>
#include <errno.h>
@ -475,7 +476,8 @@ static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev,
uint32_t actual;
uint32_t regval;
spiinfo("Old frequency: %d actual: %d New frequency: %d\n",
spiinfo("Old frequency: %" PRId32 " actual: %" PRId32
" New frequency: %" PRId32 "\n",
priv->frequency, priv->actual, frequency);
/* Check if the requested frequency is the same as the frequency
@ -512,7 +514,8 @@ static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev,
/* Save the new BRG value */
spi_putreg(priv, PIC32MX_SPI_BRG_OFFSET, regval);
spiinfo("PBCLOCK: %d frequency: %d divisor: %d BRG: %d\n",
spiinfo("PBCLOCK: %d frequency: %" PRId32 " divisor: %" PRId32
" BRG: %" PRId32 "\n",
BOARD_PBCLOCK, frequency, divisor, regval);
/* Calculate the new actual frequency.
@ -527,7 +530,8 @@ static uint32_t spi_setfrequency(FAR struct spi_dev_s *dev,
priv->frequency = frequency;
priv->actual = actual;
spiinfo("New frequency: %d Actual: %d\n", frequency, actual);
spiinfo("New frequency: %" PRId32 " Actual: %" PRId32 "\n",
frequency, actual);
return actual;
}
@ -613,7 +617,7 @@ static void spi_setmode(FAR struct spi_dev_s *dev, enum spi_mode_e mode)
}
spi_putreg(priv, PIC32MX_SPI_CON_OFFSET, regval);
spiinfo("CON: %08x\n", regval);
spiinfo("CON: %08" PRIx32 "\n", regval);
/* Save the mode so that subsequent re-configurations will be faster */
@ -674,7 +678,7 @@ static void spi_setbits(FAR struct spi_dev_s *dev, int nbits)
regval &= ~SPI_CON_MODE_MASK;
regval |= setting;
regval = spi_getreg(priv, PIC32MX_SPI_CON_OFFSET);
spiinfo("CON: %08x\n", regval);
spiinfo("CON: %08" PRIx32 "\n", regval);
/* Save the selection so that subsequent re-configurations will be
* faster.
@ -704,7 +708,7 @@ static uint32_t spi_send(FAR struct spi_dev_s *dev, uint32_t wd)
{
FAR struct pic32mx_dev_s *priv = (FAR struct pic32mx_dev_s *)dev;
spiinfo("wd: %04x\n", wd);
spiinfo("wd: %04" PRIx32 "\n", wd);
/* Write the data to transmitted to the SPI Data Register */
@ -968,7 +972,7 @@ FAR struct spi_dev_s *pic32mx_spibus_initialize(int port)
regval |= (SPI_CON_ENHBUF | SPI_CON_RTXISEL_HALF | SPI_CON_STXISEL_HALF);
#endif
spi_putreg(priv, PIC32MX_SPI_CON_OFFSET, regval);
spiinfo("CON: %08x\n", regval);
spiinfo("CON: %08" PRIx32 "\n", regval);
/* Set the initial SPI configuration */