sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAMA5: Fix logic for running with data in SDRAM

Browse Source
This commit is contained in:
Gregory Nutt 2014-01-29 07:49:23 -06:00
parent 374594ded3
commit f084b6b8ef
1 changed files with 11 additions and 40 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

51
configs/sama5d3x-ek/README.txt
View File

@ -3116,60 +3116,31 @@ To-Do List
endpoint support in the EHCI driver is untested (but works in similar
EHCI drivers).
4) The logic in "SDRAM Data Configuration" has generated some crashes.
Perhaps there are some issues with SDRAM when uses as the primary
heap?
4) HSCMI TX DMA support is currently commented out.
UPDATE: If I turn memory management debug on, the crash does not
occur:
CONFIG_DEBUG=y
# CONFIG_DEBUG_VERBOSE is not set
CONFIG_DEBUG_MM=y
# ...(No other debug output enabled)...
CONFIG_DEBUG_FULLOPT=y
Results in:
mm_initialize: Heap: start=20001228 size=268430808
mm_addregion: Region 1: base=20001228 size=268430800
NuttShell (NSH)
nsh> free
total used free largest
Mem: 268430800 6864 268423936 268423936
nsh>
Disabling debug and forcing either of the two debug outputs above also
eliminates the problem. Replacing the debug output with a delay does
not solve the problem. This needs some further investigation and a
little TLC.
5) HSCMI TX DMA support is currently commented out.
6) I believe that there is an issue when the internal AT25 FLASH is
5) I believe that there is an issue when the internal AT25 FLASH is
formatted by NuttX. That format works fine with Linux, but does not
appear to work with Windows. Reformatting on Windows can resolve this.
NOTE: This is not a SAMA5Dx issue.
7) CAN testing has not yet been performed due to issues with cabling. I
6) CAN testing has not yet been performed due to issues with cabling. I
just do not have a good test bed (or sufficient CAN knowledge) for
good CAN testing.
8) The NxWM example does not work well. This example was designed to work
7) The NxWM example does not work well. This example was designed to work
with much smaller displays and does not look good or work well with the
SAMA5Dx-EKs 800x480 display. See above for details.
9) There are lots of LCDC hardware features that are not tested with NuttX.
8) There are lots of LCDC hardware features that are not tested with NuttX.
The simple NuttX graphics system does not have support for all of the
layers and other features of the LCDC.
10) I have a Camera, but there is still no ISI driver. I am not sure what to
do with the camera. NuttX needs something like V4L to provide the
definition for what a camera driver is supposed to do.
9) I have a Camera, but there is still no ISI driver. I am not sure what to
do with the camera. NuttX needs something like V4L to provide the
definition for what a camera driver is supposed to do.
I will probably develop a test harness for ISI, but it is of only
minimal value with no OS infrastructure to deal with images and video.
I will probably develop a test harness for ISI, but it is of only
minimal value with no OS infrastructure to deal with images and video.
11) GMAC has only been tested on a 10/100Base-T network. I don't have a
10) GMAC has only been tested on a 10/100Base-T network. I don't have a
1000Base-T network to support additional testing.