From f1341dad9caad626c73caf4694e3cc42c1f350d2 Mon Sep 17 00:00:00 2001
From: Alan Carvalho de Assis <acassis@gmail.com>
Date: Thu, 2 Mar 2017 09:36:05 -0600
Subject: [PATCH] Add support to USB Device on STM32F103-Minimum board

---
 configs/stm32f103-minimum/README.txt         | 44 ++++++++++++++++++++
 configs/stm32f103-minimum/src/Makefile       |  4 ++
 configs/stm32f103-minimum/src/stm32_usbdev.c |  4 +-
 3 files changed, 50 insertions(+), 2 deletions(-)

diff --git a/configs/stm32f103-minimum/README.txt b/configs/stm32f103-minimum/README.txt
index 6b2db76939..82f9f33ce8 100644
--- a/configs/stm32f103-minimum/README.txt
+++ b/configs/stm32f103-minimum/README.txt
@@ -13,6 +13,8 @@ Contents
   - Timer Inputs/Outputs
   - Using 128KiB of Flash instead of 64KiB
   - Quadrature Encoder
+  - SDCard support
+  - USB Console support
   - STM32F103 Minimum - specific Configuration Options
   - Configurations
 
@@ -305,6 +307,48 @@ SDCard support:
   PA5, MOSI to PA7 and MISO to PA6. Note: some chinese boards use MOSO instead
   of MISO.
 
+USB Console support:
+====================
+
+  The STM32F103C8 has a USB Device controller, then we can use NuttX support
+  to USB Device. We can the console over USB enabling these options:
+
+  System Type  --->
+    STM32 Peripheral Support  --->
+      [*] USB Device
+
+  It will enable:  CONFIG_STM32_USB=y
+
+  Board Selection  --->
+    -*- Enable boardctl() interface
+    [*]   Enable USB device controls
+
+  It will enable: CONFIG_BOARDCTL_USBDEVCTRL=y
+
+  Device Drivers  --->
+    -*- USB Device Driver Support  --->
+      [*]   USB Modem (CDC/ACM) support  --->
+
+  It will enable:  CONFIG_CDCACM=y and many default options.
+
+  Device Drivers  --->
+    -*- USB Device Driver Support  --->
+      [*]   USB Modem (CDC/ACM) support  --->
+        [*]   CDC/ACM console device
+
+  It will enable: CONFIG_CDCACM_CONSOLE=y
+
+  Device Drivers  --->
+    [*] Serial Driver Support  --->
+      Serial console (No serial console)  --->
+        (X) No serial console
+
+  It will enable: CONFIG_NO_SERIAL_CONSOLE=y
+
+  After flashing the firmware in the board, unplug and plug it in the computer
+  and it will create a /dev/ttyACM0 device in the Linux. Use minicom with this
+  device to get access to NuttX NSH console (press Enter three times to start)
+
 STM32F103 Minimum - specific Configuration Options
 ==================================================
 
diff --git a/configs/stm32f103-minimum/src/Makefile b/configs/stm32f103-minimum/src/Makefile
index 387e2bfe6a..5e937a4ac0 100644
--- a/configs/stm32f103-minimum/src/Makefile
+++ b/configs/stm32f103-minimum/src/Makefile
@@ -89,4 +89,8 @@ ifeq ($(CONFIG_WL_NRF24L01),y)
 CSRCS += stm32_wireless.c
 endif
 
+ifeq ($(CONFIG_USBDEV),y)
+CSRCS += stm32_usbdev.c
+endif
+
 include $(TOPDIR)/configs/Board.mk
diff --git a/configs/stm32f103-minimum/src/stm32_usbdev.c b/configs/stm32f103-minimum/src/stm32_usbdev.c
index ecbd707fb7..92fc01f095 100644
--- a/configs/stm32f103-minimum/src/stm32_usbdev.c
+++ b/configs/stm32f103-minimum/src/stm32_usbdev.c
@@ -1,7 +1,7 @@
 /************************************************************************************
  * configs/stm32f103-minimum/src/stm32_usbdev.c
  *
- *   Copyright (C) 2016 Gregory Nutt. All rights reserved.
+ *   Copyright (C) 2016-2017 Gregory Nutt. All rights reserved.
  *   Author: Gregory Nutt <gnutt@nuttx.org>
  *           Laurent Latil <laurent@latil.nom.fr>
  *
@@ -60,7 +60,7 @@
  * Name: stm32_usbinitialize
  *
  * Description:
- *   Called to setup USB-related GPIO pins for the Hy-Mini STM32v board.
+ *   Called to setup USB-related GPIO pins for the STM32F103 Minimum board.
  *
  ************************************************************************************/