sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

arch/sh/: Change some *err() message to *info() messages if what was a *dbg() message does not indicate and error condition.

Browse Source
This commit is contained in:
Gregory Nutt 2016-06-14 11:53:36 -06:00
parent dfc703f250
commit f165dd96bf
10 changed files with 29 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
arch/sh/src/common/up_exit.c
View File

@ -86,8 +86,8 @@ static void _up_dumponexit(FAR struct tcb_s *tcb, FAR void *arg)
int i;
#endif
serr(" TCB=%p name=%s\n", tcb, tcb->argv[0]);
serr(" priority=%d state=%d\n", tcb->sched_priority, tcb->task_state);
sinfo(" TCB=%p name=%s\n", tcb, tcb->argv[0]);
sinfo(" priority=%d state=%d\n", tcb->sched_priority, tcb->task_state);
#if CONFIG_NFILE_DESCRIPTORS > 0
filelist = tcb->group->tg_filelist;
@ -96,8 +96,8 @@ static void _up_dumponexit(FAR struct tcb_s *tcb, FAR void *arg)
struct inode *inode = filelist->fl_files[i].f_inode;
if (inode)
{
serr(" fd=%d refcount=%d\n",
i, inode->i_crefs);
sinfo(" fd=%d refcount=%d\n",
i, inode->i_crefs);
}
}
#endif
@ -110,11 +110,11 @@ static void _up_dumponexit(FAR struct tcb_s *tcb, FAR void *arg)
if (filep->fs_fd >= 0)
{
#if CONFIG_STDIO_BUFFER_SIZE > 0
serr(" fd=%d nbytes=%d\n",
filep->fs_fd,
filep->fs_bufpos - filep->fs_bufstart);
sinfo(" fd=%d nbytes=%d\n",
filep->fs_fd,
filep->fs_bufpos - filep->fs_bufstart);
#else
serr(" fd=%d\n", filep->fs_fd);
sinfo(" fd=%d\n", filep->fs_fd);
#endif
}
}
@ -147,10 +147,10 @@ void _exit(int status)
(void)up_irq_save();
sllerr("TCB=%p exiting\n", this_task());
sllinfo("TCB=%p exiting\n", this_task());
#if defined(CONFIG_DUMP_ON_EXIT) && defined(CONFIG_DEBUG_FEATURES)
sllerr("Other tasks:\n");
sllinfo("Other tasks:\n");
sched_foreach(_up_dumponexit, NULL);
#endif

4
arch/sh/src/common/up_initialize.c
View File

@ -82,13 +82,13 @@ static void up_calibratedelay(void)
{
int i;
sllerr("Beginning 100s delay\n");
sllwarn("Beginning 100s delay\n");
for (i = 0; i < 100; i++)
{
up_mdelay(1000);
}
sllerr("End 100s delay\n");
sllwarn("End 100s delay\n");
}
#else
# define up_calibratedelay()

2
arch/sh/src/common/up_releasepending.c
View File

@ -67,7 +67,7 @@ void up_release_pending(void)
{
struct tcb_s *rtcb = this_task();
sllerr("From TCB=%p\n", rtcb);
sllinfo("From TCB=%p\n", rtcb);
/* Merge the g_pendingtasks list into the ready-to-run task list */

2
arch/sh/src/common/up_reprioritizertr.c
View File

@ -95,7 +95,7 @@ void up_reprioritize_rtr(struct tcb_s *tcb, uint8_t priority)
struct tcb_s *rtcb = this_task();
bool switch_needed;
sllerr("TCB=%p PRI=%d\n", tcb, priority);
sllinfo("TCB=%p PRI=%d\n", tcb, priority);
/* Remove the tcb task from the ready-to-run list.
* sched_removereadytorun will return true if we just

4
arch/sh/src/m16c/m16c_schedulesigaction.c
View File

@ -93,7 +93,7 @@ void up_schedule_sigaction(struct tcb_s *tcb, sig_deliver_t sigdeliver)
{
irqstate_t flags;
serr("tcb=0x%p sigdeliver=0x%p\n", tcb, sigdeliver);
sinfo("tcb=0x%p sigdeliver=0x%p\n", tcb, sigdeliver);
/* Make sure that interrupts are disabled */
@ -107,7 +107,7 @@ void up_schedule_sigaction(struct tcb_s *tcb, sig_deliver_t sigdeliver)
* being delivered to the currently executing task.
*/
serr("rtcb=0x%p g_current_regs=0x%p\n", this_task(), g_current_regs);
sinfo("rtcb=0x%p g_current_regs=0x%p\n", this_task(), g_current_regs);
if (tcb == this_task())
{

10
arch/sh/src/m16c/m16c_serial.c
View File

@ -588,7 +588,7 @@ static int up_setup(struct uart_dev_s *dev)
else
#endif
{
err("Invalid UART #\n");
err("ERROR: Invalid UART #\n");
}
/* Set UART transmit/receive control register 1 to enable transmit and receive */
@ -613,7 +613,7 @@ static int up_setup(struct uart_dev_s *dev)
}
else
{
err("Invalid bits=%d\n", priv->bits);
err("ERROR: Invalid bits=%d\n", priv->bits);
}
if (priv->parity != 0)
@ -665,7 +665,7 @@ static int up_setup(struct uart_dev_s *dev)
else
#endif
{
err("Invalid UART #\n");
err("ERROR: Invalid UART #\n");
}
/* Read any data left in the RX fifo */
@ -872,7 +872,7 @@ static void m16c_rxint(struct up_dev_s *dev, bool enable)
else
#endif
{
err("Invalid UART #\n");
err("ERROR: Invalid UART #\n");
return;
}
@ -1027,7 +1027,7 @@ static void m16c_txint(struct up_dev_s *dev, bool enable)
else
#endif
{
err("Invalid UART #\n");
err("ERROR: Invalid UART #\n");
return;
}

4
arch/sh/src/m16c/m16c_sigdeliver.c
View File

@ -95,7 +95,7 @@ void up_sigdeliver(void)
board_autoled_on(LED_SIGNAL);
serr("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
sinfo("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
@ -128,7 +128,7 @@ void up_sigdeliver(void)
* errno that is needed by the user logic (it is probably EINTR).
*/
serr("Resuming\n");
sinfo("Resuming\n");
(void)up_irq_save();
rtcb->pterrno = saved_errno;

4
arch/sh/src/sh1/sh1_irq.c
View File

@ -95,7 +95,7 @@ void up_prioritize_irq(int irq, int priority)
#ifdef CONFIG_DEBUG_FEATURES
if ((unsigned) irq > NR_IRQS || (unsigned)priority > 15)
{
err("Invalid parameters\n");
err("ERROR: Invalid parameters\n");
return;
}
#endif
@ -260,7 +260,7 @@ void up_prioritize_irq(int irq, int priority)
#endif
default:
err("Invalid irq=%d\n", irq);
err("ERROR: Invalid irq=%d\n", irq);
return;
}

4
arch/sh/src/sh1/sh1_schedulesigaction.c
View File

@ -93,7 +93,7 @@ void up_schedule_sigaction(struct tcb_s *tcb, sig_deliver_t sigdeliver)
{
irqstate_t flags;
serr("tcb=0x%p sigdeliver=0x%p\n", tcb, sigdeliver);
sinfo("tcb=0x%p sigdeliver=0x%p\n", tcb, sigdeliver);
/* Make sure that interrupts are disabled */
@ -107,7 +107,7 @@ void up_schedule_sigaction(struct tcb_s *tcb, sig_deliver_t sigdeliver)
* being delivered to the currently executing task.
*/
serr("rtcb=0x%p g_current_regs=0x%p\n", this_task(), g_current_regs);
sinfo("rtcb=0x%p g_current_regs=0x%p\n", this_task(), g_current_regs);
if (tcb == this_task())
{

4
arch/sh/src/sh1/sh1_sigdeliver.c
View File

@ -95,7 +95,7 @@ void up_sigdeliver(void)
board_autoled_on(LED_SIGNAL);
serr("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
sinfo("rtcb=%p sigdeliver=%p sigpendactionq.head=%p\n",
rtcb, rtcb->xcp.sigdeliver, rtcb->sigpendactionq.head);
ASSERT(rtcb->xcp.sigdeliver != NULL);
@ -127,7 +127,7 @@ void up_sigdeliver(void)
* errno that is needed by the user logic (it is probably EINTR).
*/
serr("Resuming\n");
sinfo("Resuming\n");
(void)up_irq_save();
rtcb->pterrno = saved_errno;