sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Add config for 2G Engineering Nucleus LPC1768 board

Browse Source 
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2728 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2010-06-05 20:04:21 +00:00
parent 1bf43e8332
commit f2c699c3c6
17 changed files with 2395 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
arch/arm/include/lpc17xx/irq.h
View File

@ -85,13 +85,13 @@
* Capture 0-1 */
#define LPC17_IRQ_TMR3 (LPC17_IRQ_EXTINT+4) /* Timer 3 Match 0-3
* Capture 0-1 */
#define LPC17_IRQ_UART0 (LPC17_IRQ_EXTINT+5) /* UART0 Rx Line Status (RLS)
#define LPC17_IRQ_UART0 (LPC17_IRQ_EXTINT+5) /* UART 0 Rx Line Status (RLS)
* Transmit Holding Register Empty (THRE)
* Rx Data Available (RDA)
* Character Time-out Indicator (CTI)
* End of Auto-Baud (ABEO)
* Auto-Baud Time-Out (ABTO) */
#define LPC17_IRQ_UART1 (LPC17_IRQ_EXTINT+6) /* UART1 Rx Line Status (RLS)
#define LPC17_IRQ_UART1 (LPC17_IRQ_EXTINT+6) /* UART 1 Rx Line Status (RLS)
* Transmit Holding Register Empty (THRE)
* Rx Data Available (RDA)
* Character Time-out Indicator (CTI)
@ -128,10 +128,10 @@
#define LPC17_IRQ_PLL0 (LPC17_IRQ_EXTINT+16) /* PLL0 (Main PLL) PLL0 Lock (PLOCK0) */
#define LPC17_IRQ_RTC (LPC17_IRQ_EXTINT+17) /* RTC Counter Increment (RTCCIF)
* Alarm (RTCALF) */
#define LPC17_IRQ_EINT0 (LPC17_IRQ_EXTINT+18) /* External Interrupt External Interrupt 0 (EINT0) */
#define LPC17_IRQ_EINT1 (LPC17_IRQ_EXTINT+19) /* External Interrupt External Interrupt 1 (EINT1) */
#define LPC17_IRQ_EINT2 (LPC17_IRQ_EXTINT+20) /* External Interrupt External Interrupt 2 (EINT2) */
#define LPC17_IRQ_EINT3 (LPC17_IRQ_EXTINT+21) /* External Interrupt External Interrupt 3 (EINT3)
#define LPC17_IRQ_EINT0 (LPC17_IRQ_EXTINT+18) /* External Interrupt 0 (EINT0) */
#define LPC17_IRQ_EINT1 (LPC17_IRQ_EXTINT+19) /* External Interrupt 1 (EINT1) */
#define LPC17_IRQ_EINT2 (LPC17_IRQ_EXTINT+20) /* External Interrupt 2 (EINT2) */
#define LPC17_IRQ_EINT3 (LPC17_IRQ_EXTINT+21) /* External Interrupt 3 (EINT3)
* Note: EINT3 channel is shared with GPIO interrupts */
#define LPC17_IRQ_ADC (LPC17_IRQ_EXTINT+22) /* ADC A/D Converter end of conversion */
#define LPC17_IRQ_BOD (LPC17_IRQ_EXTINT+23) /* BOD Brown Out detect */

63
arch/arm/src/lpc17xx/Make.defs Executable file
View File

@ -0,0 +1,63 @@
############################################################################
# arch/arm/src/lpc17xx/Make.defs
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
# The start-up, "head", file
HEAD_ASRC = lpc17_vectors.S
# Common ARM and Cortex-M3 files
CMN_ASRCS = up_saveusercontext.S up_fullcontextrestore.S up_switchcontext.S
CMN_CSRCS = up_assert.c up_blocktask.c up_copystate.c up_createstack.c \
up_mdelay.c up_udelay.c up_exit.c up_idle.c up_initialize.c \
up_initialstate.c up_interruptcontext.c up_modifyreg8.c \
up_modifyreg16.c up_modifyreg32.c up_releasepending.c \
up_releasestack.c up_reprioritizertr.c up_schedulesigaction.c \
up_sigdeliver.c up_unblocktask.c up_usestack.c up_doirq.c \
up_hardfault.c up_svcall.c
# Required SAM3U files
CHIP_ASRCS =
CHIP_CSRCS = lpc17_start.c
#CHIP_CSRCS = lpc17_allocateheap.c lpc17_clockconfig.c lpc17_gpioirq.c \
# lpc17_irq.c lpc17_lowputc.c lpc17_pio.c lpc17_serial.c \
# lpc17_start.c lpc17_timerisr.c
# Configuration-dependent SAM3U files
ifeq ($(CONFIG_LPC17_DMA),y)
CHIP_CSRCS += lpc17_dmac.c
endif

24
arch/arm/src/lpc17xx/chip.h
View File

@ -48,7 +48,7 @@
/* Get customizations for each supported chip */
#if defined(CONFIG_LPC17XX_LPC1769) || defined(CONFIG_LPC17XX_LPC1768)
#if defined(CONFIG_ARCH_CHIP_LPC1769) || defined(CONFIG_ARCH_CHIP_LPC1768)
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
@ -58,7 +58,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1767)
#elif defined(CONFIG_ARCH_CHIP_LPC1767)
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
@ -68,7 +68,7 @@
# define LPC17_NCAN 0 /* No CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1766)
#elif defined(CONFIG_ARCH_CHIP_LPC1766)
# define LPC17_FLASH_SIZE (256*1024) /* 256Kb */
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
@ -78,7 +78,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1765)
#elif defined(CONFIG_ARCH_CHIP_LPC1765)
# define LPC17_FLASH_SIZE (256*1024) /* 256Kb */
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
@ -88,7 +88,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1764)
#elif defined(CONFIG_ARCH_CHIP_LPC1764)
# define LPC17_FLASH_SIZE (128*1024) /* 128Kb */
# define LPC17_SRAM_SIZE (32*1024) /* 32Kb */
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
@ -98,7 +98,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 0 /* No I2S modules */
# define LPC17_NDAC 0 /* No DAC module */
#elif defined(CONFIG_LPC17XX_LPC1759)
#elif defined(CONFIG_ARCH_CHIP_LPC1759)
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
@ -108,7 +108,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1758)
#elif defined(CONFIG_ARCH_CHIP_LPC1758)
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
@ -118,7 +118,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1756)
#elif defined(CONFIG_ARCH_CHIP_LPC1756)
# define LPC17_FLASH_SIZE (256*1024) /* 256Kb */
# define LPC17_SRAM_SIZE (32*1024) /* 32Kb */
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
@ -128,7 +128,7 @@
# define LPC17_NCAN 2 /* Two CAN controllers */
# define LPC17_NI2S 1 /* One I2S module */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1754)
#elif defined(CONFIG_ARCH_CHIP_LPC1754)
# define LPC17_FLASH_SIZE (128*1024) /* 128Kb */
# define LPC17_SRAM_SIZE (32*1024) /* 32Kb */
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
@ -138,7 +138,7 @@
# define LPC17_NCAN 1 /* One CAN controller */
# define LPC17_NI2S 0 /* No I2S modules */
# define LPC17_NDAC 1 /* One DAC module */
#elif defined(CONFIG_LPC17XX_LPC1752)
#elif defined(CONFIG_ARCH_CHIP_LPC1752)
# define LPC17_FLASH_SIZE (64*1024) /* 65Kb */
# define LPC17_SRAM_SIZE (16*1024) /* 16Kb */
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
@ -148,7 +148,7 @@
# define LPC17_NCAN 1 /* One CAN controller */
# define LPC17_NI2S 0 /* No I2S modules */
# define LPC17_NDAC 0 /* No DAC module */
#elif defined(CONFIG_LPC17XX_LPC1751)
#elif defined(CONFIG_ARCH_CHIP_LPC1751)
# define LPC17_FLASH_SIZE (32*1024) /* 32Kb */
# define LPC17_SRAM_SIZE (8*1024) /* 8Kb */
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
@ -166,7 +166,7 @@
* file for the proper setup
*/
#include "lpc17xx_memorymap.h"
#include "lpc17_memorymap.h"
/************************************************************************************
* Public Types

219
arch/arm/src/lpc17xx/lpc17_internal.h Executable file
View File

@ -0,0 +1,219 @@
/************************************************************************************
* arch/arm/src/lpc17xx/lpc17_internal.h
*
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H
#define __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
#include <sys/types.h>
#include <stdint.h>
#include <stdbool.h>
#include "up_internal.h"
#include "chip.h"
/************************************************************************************
* Definitions
************************************************************************************/
/* Configuration ********************************************************************/
/* Bit-encoded input to lpc17_configgpio() ******************************************/
/* GPIO pin definitions *************************************************************/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Inline Functions
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Data
************************************************************************************/
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: lpc17_clockconfig
*
* Description:
* Called to initialize the LPC17XX. This does whatever setup is needed to put the
* MCU in a usable state. This includes the initialization of clocking using the
* settings in board.h.
*
************************************************************************************/
EXTERN void lpc17_clockconfig(void);
/************************************************************************************
* Name: lpc17_lowsetup
*
* Description:
* Called at the very beginning of _start. Performs low level initialization
* including setup of the console UART. This UART done early so that the serial
* console is available for debugging very early in the boot sequence.
*
************************************************************************************/
EXTERN void lpc17_lowsetup(void);
/************************************************************************************
* Name: lpc17_gpioirqinitialize
*
* Description:
* Initialize logic to support a second level of interrupt decoding for GPIO pins.
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void lpc17_gpioirqinitialize(void);
#else
# define lpc17_gpioirqinitialize()
#endif
/************************************************************************************
* Name: lpc17_configgpio
*
* Description:
* Configure a GPIO pin based on bit-encoded description of the pin.
*
************************************************************************************/
EXTERN int lpc17_configgpio(uint16_t cfgset);
/************************************************************************************
* Name: lpc17_gpiowrite
*
* Description:
* Write one or zero to the selected GPIO pin
*
************************************************************************************/
EXTERN void lpc17_gpiowrite(uint16_t pinset, bool value);
/************************************************************************************
* Name: lpc17_gpioread
*
* Description:
* Read one or zero from the selected GPIO pin
*
************************************************************************************/
EXTERN bool lpc17_gpioread(uint16_t pinset);
/************************************************************************************
* Name: lpc17_gpioirq
*
* Description:
* Configure an interrupt for the specified GPIO pin.
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void lpc17_gpioirq(uint16_t pinset);
#else
# define lpc17_gpioirq(pinset)
#endif
/************************************************************************************
* Name: lpc17_gpioirqenable
*
* Description:
* Enable the interrupt for specified GPIO IRQ
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void lpc17_gpioirqenable(int irq);
#else
# define lpc17_gpioirqenable(irq)
#endif
/************************************************************************************
* Name: lpc17_gpioirqdisable
*
* Description:
* Disable the interrupt for specified GPIO IRQ
*
************************************************************************************/
#ifdef CONFIG_GPIO_IRQ
EXTERN void lpc17_gpioirqdisable(int irq);
#else
# define lpc17_gpioirqdisable(irq)
#endif
/************************************************************************************
* Function: lpc17_dumpgpio
*
* Description:
* Dump all GPIO registers associated with the base address of the provided pinset.
*
************************************************************************************/
#ifdef CONFIG_DEBUG_GPIO
EXTERN int lpc17_dumpgpio(uint32_t pinset, const char *msg);
#else
# define lpc17_dumpgpio(p,m)
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H */

4
arch/arm/src/lpc17xx/lpc17_memorymap.h
View File

@ -50,12 +50,12 @@
/* Memory Map ***********************************************************************/
#define LPC17_FLASH_BASE 0x00000000 /* -0x1fffffff: On-chip non-volatilenmemory */
#define LPC17_FLASH_BASE 0x00000000 /* -0x1fffffff: On-chip non-volatile memory */
#define LPC17_SRAM_BASE 0x10000000 /* -0x10007fff: On-chip SRAM (devices <=32Kb) */
#define LPC17_ROM_BASE 0x1fff0000 /* -0x1fffffff: 8Kb Boot ROM with flash services */
#define LPC17_AHBSRAM_BASE 0x20000000 /* -0x3fffffff: On-chip AHB SRAM (devices >32Kb) */
# define LPC17_SRAM_BANK0 0x20070000 /* -0x2007ffff: On-chip AHB SRAM Bank0 (devices >=32Kb) */
# define LPC17_SRAM_BANK1 0x20080000 /* -0x2008ffff: On-chip AHB SRAM Bank0 (devices 64Kb) */
# define LPC17_SRAM_BANK1 0x20080000 /* -0x2008ffff: On-chip AHB SRAM Bank1 (devices 64Kb) */
#define LPC17_GPIO_BASE 0x2009c000 /* -0x2009ffff: GPIO */
#define LPC17_APB_BASE 0x40000000 /* -0x5fffffff: APB Peripherals */
# define LPC17_APB0_BASE 0x40000000 /* -0x4007ffff: APB0 Peripherals */

151
arch/arm/src/lpc17xx/lpc17_start.c Executable file
View File

@ -0,0 +1,151 @@
/****************************************************************************
* arch/arm/src/lpc17xx/lpc17_start.c
* arch/arm/src/chip/lpc17_start.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <assert.h>
#include <debug.h>
#include <nuttx/init.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "lpc17_internal.h"
/****************************************************************************
* Private Definitions
****************************************************************************/
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Public Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: showprogress
*
* Description:
* Print a character on the UART to show boot status.
*
****************************************************************************/
#ifdef CONFIG_DEBUG
# define showprogress(c) up_lowputc(c)
#else
# define showprogress(c)
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: _start
*
* Description:
* This is the reset entry point.
*
****************************************************************************/
void __start(void)
{
const uint32_t *src;
uint32_t *dest;
/* Configure the uart so that we can get debug output as soon as possible */
lpc17_clockconfig();
lpc17_lowsetup();
showprogress('A');
/* Clear .bss. We'll do this inline (vs. calling memset) just to be
* certain that there are no issues with the state of global variables.
*/
for (dest = &_sbss; dest < &_ebss; )
{
*dest++ = 0;
}
showprogress('B');
/* Move the intialized data section from his temporary holding spot in
* FLASH into the correct place in SRAM. The correct place in SRAM is
* give by _sdata and _edata. The temporary location is in FLASH at the
* end of all of the other read-only data (.text, .rodata) at _eronly.
*/
for (src = &_eronly, dest = &_sdata; dest < &_edata; )
{
*dest++ = *src++;
}
showprogress('C');
/* Perform early serial initialization */
#ifdef CONFIG_USE_EARLYSERIALINIT
up_earlyserialinit();
#endif
showprogress('D');
/* Initialize onboard resources */
lpc17_boardinitialize();
showprogress('E');
/* Then start NuttX */
showprogress('\r');
showprogress('\n');
os_start();
/* Shouldn't get here */
for(;;);
}

349
arch/arm/src/lpc17xx/lpc17_vectors.S Executable file
View File

@ -0,0 +1,349 @@
/************************************************************************************************
* arch/arm/src/lpc17xx/lpc17_vectors.S
* arch/arm/src/chip/lpc17_vectors.S
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************************/
/************************************************************************************************
* Included Files
************************************************************************************************/
#include <nuttx/config.h>
#include <arch/irq.h>
/************************************************************************************************
* Preprocessor Definitions
************************************************************************************************/
/* Memory Map:
*
* 0x0000:0000 - Beginning of FLASH. Address of vectors
* 0x0003:ffff - End of flash
* 0x1000:0000 - Start of CPU SRAM and start of .data (_sdata)
* - End of .data (_edata) and start of .bss (_sbss)
* - End of .bss (_ebss) and bottom of idle stack
* - _ebss + CONFIG_IDLETHREAD_STACKSIZE = end of idle stack, start of heap. NOTE
* that the ARM uses a decrement before store stack so that the correct initial
* value is the end of the stack + 4;
* 0x1000:7fff - End of CPU SRAM and end of heap (1st region)
*/
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
/* The Cortex-M3 return from interrupt is unusual. We provide the following special
* address to the BX instruction. The particular value also forces a return to
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
*/
#define EXC_RETURN 0xfffffff9
/************************************************************************************************
* Global Symbols
************************************************************************************************/
.globl __start
.syntax unified
.thumb
.file "lpc17_vectors.S"
/************************************************************************************************
* Macros
************************************************************************************************/
/* On entry into an IRQ, the hardware automatically saves the xPSR, PC, LR, R12, R0-R3
* registers on the stack, then branches to an instantantiation of the following
* macro. This macro simply loads the IRQ number into R0, then jumps to the common
* IRQ handling logic.
*/
.macro HANDLER, label, irqno
.thumb_func
\label:
mov r0, #\irqno
b lpc17_common
.endm
/************************************************************************************************
* Vectors
************************************************************************************************/
.section .vectors, "ax"
.code 16
.align 2
.globl lpc17_vectors
.type lpc17_vectors, function
lpc17_vectors:
/* Processor Exceptions */
.word IDLE_STACK /* Vector 0: Reset stack pointer */
.word __start /* Vector 1: Reset vector */
.word lpc17_nmi /* Vector 2: Non-Maskable Interrupt (NMI) */
.word lpc17_hardfault /* Vector 3: Hard fault */
.word lpc17_mpu /* Vector 4: Memory management (MPU) */
.word lpc17_busfault /* Vector 5: Bus fault */
.word lpc17_usagefault /* Vector 6: Usage fault */
.word lpc17_reserved /* Vector 7: Reserved */
.word lpc17_reserved /* Vector 8: Reserved */
.word lpc17_reserved /* Vector 9: Reserved */
.word lpc17_reserved /* Vector 10: Reserved */
.word lpc17_svcall /* Vector 11: SVC call */
.word lpc17_dbgmonitor /* Vector 12: Debug monitor */
.word lpc17_reserved /* Vector 13: Reserved */
.word lpc17_pendsv /* Vector 14: Pendable system service request */
.word lpc17_systick /* Vector 15: System tick */
/* External Interrupts */
.word lpc17_wdt /* Vector 16+0: Watchdog timer */
.word lpc17_tmr0 /* Vector 16+1: Timer 0 */
.word lpc17_tmr1 /* Vector 16+2: Timer 1 */
.word lpc17_tmr2 /* Vector 16+3: Timer 2 */
.word lpc17_tmr3 /* Vector 16+4: Timer 3 */
.word lpc17_uart0 /* Vector 16+5: UART 0 */
.word lpc17_uart1 /* Vector 16+6: UART 1 */
.word lpc17_uart2 /* Vector 16+7: UART 2 */
.word lpc17_uart3 /* Vector 16+8: UART 3 */
.word lpc17_pwm1 /* Vector 16+9: PWM */
.word lpc17_i2c0 /* Vector 16+10: I2C 0 */
.word lpc17_i2c1 /* Vector 16+11: I2C 1 */
.word lpc17_i2c2 /* Vector 16+12: I2C 2 */
.word lpc17_spif /* Vector 16+13: SPI */
.word lpc17_ssp0 /* Vector 16+14: SSP 0 */
.word lpc17_ssp1 /* Vector 16+15: SSP 1 */
.word lpc17_pll0 /* Vector 16+16: PLL 0 */
.word lpc17_rtc /* Vector 16+17: Real time clock */
.word lpc17_eint0 /* Vector 16+18: External interrupt 0 */
.word lpc17_eint1 /* Vector 16+19: External interrupt 1 */
.word lpc17_eint2 /* Vector 16+20: External interrupt 2 */
.word lpc17_eint3 /* Vector 16+21: External interrupt 3 */
.word lpc17_adc /* Vector 16+22: A/D Converter */
.word lpc17_bod /* Vector 16+23: Brown Out detect */
.word lpc17_usb /* Vector 16+24: USB */
.word lpc17_can /* Vector 16+25: CAN */
.word lpc17_gpdma /* Vector 16+26: GPDMA */
.word lpc17_i2s /* Vector 16+27: I2S */
.word lpc17_eth /* Vector 16+28: Ethernet */
.word lpc17_ritint /* Vector 16+29: Repetitive Interrupt Timer */
.word lpc17_mcpwm /* Vector 16+30: Motor Control PWM */
.word lpc17_qei /* Vector 16+31: Quadrature Encoder */
.word lpc17_pll1 /* Vector 16+32: PLL 1 */
.word lpc17_usbact /* Vector 16+33: USB Activity Interrupt */
.word lpc17_canact /* Vector 16+34: CAN Activity Interrupt */
.size lpc17_vectors, .-lpc17_vectors
/************************************************************************************************
* .text
************************************************************************************************/
.text
.type handlers, function
.thumb_func
handlers:
HANDLER lpc17_reserved, LPC17_IRQ_RESERVED /* Unexpected/reserved vector */
HANDLER lpc17_nmi, LPC17_IRQ_NMI /* Vector 2: Non-Maskable Interrupt (NMI) */
HANDLER lpc17_hardfault, LPC17_IRQ_HARDFAULT /* Vector 3: Hard fault */
HANDLER lpc17_mpu, LPC17_IRQ_MPU /* Vector 4: Memory management (MPU) */
HANDLER lpc17_busfault, LPC17_IRQ_BUSFAULT /* Vector 5: Bus fault */
HANDLER lpc17_usagefault, LPC17_IRQ_USAGEFAULT /* Vector 6: Usage fault */
HANDLER lpc17_svcall, LPC17_IRQ_SVCALL /* Vector 11: SVC call */
HANDLER lpc17_dbgmonitor, LPC17_IRQ_DBGMONITOR /* Vector 12: Debug Monitor */
HANDLER lpc17_pendsv, LPC17_IRQ_PENDSV /* Vector 14: Penable system service request */
HANDLER lpc17_systick, LPC17_IRQ_SYSTICK /* Vector 15: System tick */
HANDLER lpc17_wdt, LPC17_IRQ_WDT /* Vector 16+0: Watchdog timer */
HANDLER lpc17_tmr0, LPC17_IRQ_TMR0 /* Vector 16+1: Timer 0 */
HANDLER lpc17_tmr1, LPC17_IRQ_TMR1 /* Vector 16+2: Timer 1 */
HANDLER lpc17_tmr2, LPC17_IRQ_TMR2 /* Vector 16+3: Timer 2 */
HANDLER lpc17_tmr3, LPC17_IRQ_TMR3 /* Vector 16+4: Timer 3 */
HANDLER lpc17_uart0, LPC17_IRQ_UART0 /* Vector 16+5: UART 0 */
HANDLER lpc17_uart1, LPC17_IRQ_UART1 /* Vector 16+6: UART 1 */
HANDLER lpc17_uart2, LPC17_IRQ_UART2 /* Vector 16+7: UART 2 */
HANDLER lpc17_uart3, LPC17_IRQ_UART3 /* Vector 16+8: UART 3 */
HANDLER lpc17_pwm1, LPC17_IRQ_PWM1 /* Vector 16+9: PWM 1 */
HANDLER lpc17_i2c0, LPC17_IRQ_I2C0 /* Vector 16+10: I2C 0 */
HANDLER lpc17_i2c1, LPC17_IRQ_I2C1 /* Vector 16+11: I2C 1 */
HANDLER lpc17_i2c2, LPC17_IRQ_I2C2 /* Vector 16+12: I2C 2 */
HANDLER lpc17_spif, LPC17_IRQ_SPIF /* Vector 16+13: SPI */
HANDLER lpc17_ssp0, LPC17_IRQ_SSP0 /* Vector 16+14: SSP 0 */
HANDLER lpc17_ssp1, LPC17_IRQ_SSP1 /* Vector 16+15: SSP 1 */
HANDLER lpc17_pll0, LPC17_IRQ_PLL0 /* Vector 16+16: PLL 0 */
HANDLER lpc17_rtc, LPC17_IRQ_RTC /* Vector 16+17: Real time clock */
HANDLER lpc17_eint0, LPC17_IRQ_EINT0 /* Vector 16+18: External interrupt 0 */
HANDLER lpc17_eint1, LPC17_IRQ_EINT1 /* Vector 16+19: External interrupt 1 */
HANDLER lpc17_eint2, LPC17_IRQ_EINT2 /* Vector 16+20: External interrupt 2 */
HANDLER lpc17_eint3, LPC17_IRQ_EINT3 /* Vector 16+21: External interrupt 3 */
HANDLER lpc17_adc, LPC17_IRQ_ADC /* Vector 16+22: A/D Converter */
HANDLER lpc17_bod, LPC17_IRQ_BOD /* Vector 16+23: Brown Out detect */
HANDLER lpc17_usb, LPC17_IRQ_USB /* Vector 16+24: USB */
HANDLER lpc17_can, LPC17_IRQ_CAN /* Vector 16+25: CAN */
HANDLER lpc17_gpdma, LPC17_IRQ_GPDMA /* Vector 16+26: GPDMA */
HANDLER lpc17_i2s, LPC17_IRQ_I2S /* Vector 16+27: I2S */
HANDLER lpc17_eth, LPC17_IRQ_ETH /* Vector 16+28: Ethernet */
HANDLER lpc17_ritint, LPC17_IRQ_RITINT /* Vector 16+29: Repetitive Interrupt Timer */
HANDLER lpc17_mcpwm, LPC17_IRQ_MCPWM /* Vector 16+30: Motor Control PWM */
HANDLER lpc17_qei, LPC17_IRQ_QEI /* Vector 16+31: Quadrature Encoder */
HANDLER lpc17_pll1, LPC17_IRQ_PLL1 /* Vector 16+32: PLL 1 */
HANDLER lpc17_usbact, LPC17_IRQ_USBACT /* Vector 16+33: USB Activity Interrupt */
HANDLER lpc17_canact, LPC17_IRQ_CANACT /* Vector 16+34: CAN Activity Interrupt */
/* Common IRQ handling logic. On entry here, the stack is like the following:
*
* REG_XPSR
* REG_R15
* REG_R14
* REG_R12
* REG_R3
* REG_R2
* REG_R1
* MSP->REG_R0
*
* and R0 contains the IRQ number
*/
lpc17_common:
/* Complete the context save */
mrs r1, msp /* R1=The main stack pointer */
mov r2, r1 /* R2=Copy of the main stack pointer */
add r2, #HW_XCPT_SIZE /* R2=MSP before the interrupt was taken */
mrs r3, primask /* R3=Current PRIMASK setting */
stmdb r1!, {r2-r11} /* Save the remaining registers plus the SP value */
/* Disable interrupts, select the stack to use for interrupt handling
* and call up_doirq to handle the interrupt
*/
cpsid i /* Disable further interrupts */
/* If CONFIG_ARCH_INTERRUPTSTACK is defined, we will use a special interrupt
* stack pointer. The way that this is done here prohibits nested interrupts!
* Otherwise, we will re-use the main stack for interrupt level processing.
*/
#ifdef CONFIG_ARCH_INTERRUPTSTACK
ld sp, #up_interruptstack_base
str r1, [sp, #-4]! /* Save the MSP on the interrupt stack */
bl up_doirq /* R0=IRQ, R1=register save (msp) */
ldr r1, [sp, #+4]! /* Recover R1=main stack pointer */
#else
mov sp, r1 /* We are using the main stack pointer */
bl up_doirq /* R0=IRQ, R1=register save (msp) */
mov r1, sp /* Recover R1=main stack pointer */
#endif
/* On return from up_doirq, R0 will hold a pointer to register context
* array to use for the interrupt return. If that return value is the same
* as current stack pointer, then things are relatively easy.
*/
cmp r0, r1 /* Context switch? */
beq 1f /* Branch if no context switch */
/* We are returning with a pending context switch. This case is different
* because in this case, the register save structure does not lie on the
* stack but, rather, are within a TCB structure. We'll have to copy some
* values to the stack.
*/
add r1, r0, #SW_XCPT_SIZE /* R1=Address of HW save area in reg array */
ldmia r1, {r4-r11} /* Fetch eight registers in HW save area */
ldr r1, [r0, #(4*REG_SP)] /* R1=Value of SP before interrupt */
stmdb r1!, {r4-r11} /* Store eight registers in HW save area */
ldmia r0, {r2-r11} /* Recover R4-R11 + 2 temp values */
b 2f /* Re-join common logic */
/* We are returning with no context switch. We simply need to "unwind"
* the same stack frame that we created
*/
1:
ldmia r1!, {r2-r11} /* Recover R4-R11 + 2 temp values */
2:
msr msp, r1 /* Recover the return MSP value */
/* Do we need to restore interrupts? */
tst r3, #1 /* PRIMASK bit 1=1 means that interrupts are masked */
bne 3f
cpsie i /* Restore interrupts */
/* Always return with R14 containing the special value that will: (1)
* return to thread mode, and (2) continue to use the MSP
*/
3:
ldr r14, =EXC_RETURN /* Load the special value */
bx r14 /* And return */
.size handlers, .-handlers
/************************************************************************************************
* Name: up_interruptstack/g_userstack
*
* Description:
* Shouldn't happen
*
************************************************************************************************/
#if CONFIG_ARCH_INTERRUPTSTACK > 3
.bss
.align 4
up_interruptstack:
.skip (CONFIG_ARCH_INTERRUPTSTACK & ~3)
up_interruptstack_base:
.size up_interruptstack, .-up_interruptstack
#endif
/************************************************************************************************
* .rodata
************************************************************************************************/
.section .rodata, "a"
/* Variables: _sbss is the start of the BSS region (see ld.script) _ebss is the end
* of the BSS regsion (see ld.script). The idle task stack starts at the end of BSS
* and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE thread is the thread that
* the system boots on and, eventually, becomes the idle, do nothing task that runs
* only when there is nothing else to run. The heap continues from there until the
* end of memory. See g_heapbase below.
*/
.globl g_heapbase
.type g_heapbase, object
g_heapbase:
.word HEAP_BASE
.size g_heapbase, .-g_heapbase
.end

5
configs/README.txt
View File

@ -671,6 +671,11 @@ configs/ntosd-dm320
STATUS: This port is code complete, verified, and included in the
NuttX 0.2.1 release.
configs/nucleus2g
This port uses the Nucleus 2G board (with Babel CAN board). This board
features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/)
for more information about the Nucleus 2G.
configs/olimex-lpc2378
This port uses the Olimex Olimex-lpc2378 board arm-elf toolchain* under
Linux or Cygwin. STATUS: ostest and NSH configurations available.

99
configs/nucleus2g/include/board.h Executable file
View File

@ -0,0 +1,99 @@
/************************************************************************************
* configs/nucleus2g/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef __ARCH_BOARD_BOARD_H
#define __ARCH_BOARD_BOARD_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* Clocking *************************************************************************/
/* LED definitions ******************************************************************/
#define LED_STARTED 0
#define LED_HEAPALLOCATE 1
#define LED_IRQSENABLED 2
#define LED_STACKCREATED 3
#define LED_INIRQ 4
#define LED_SIGNAL 5
#define LED_ASSERTION 6
#define LED_PANIC 7
/************************************************************************************
* Public Data
************************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/************************************************************************************
* Public Function Prototypes
************************************************************************************/
/************************************************************************************
* Name: lpc17_boardinitialize
*
* Description:
* All LPC17xx architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
EXTERN void lpc17_boardinitialize(void);
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* __ARCH_BOARD_BOARD_H */

168
configs/nucleus2g/ostest/Make.defs Executable file
View File

@ -0,0 +1,168 @@
############################################################################
# configs/nucleus2g/ostest/Make.defs
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
include ${TOPDIR}/.config
# Setup for the selected toolchain
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
# CodeSourcery under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
# CodeSourcery under Linux
CROSSDEV = arm-none-eabi-
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
MAXOPTIMIZATION = -O2
endif
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
# devkitARM under Windows
CROSSDEV = arm-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_LPC17_RAISONANCE),y)
# Raisonance RIDE7 under Windows
CROSSDEV = arm-none-eabi-
WINTOOL = y
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
endif
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
# NuttX buildroot under Linux or Cygwin
CROSSDEV = arm-elf-
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
MAXOPTIMIZATION = -Os
endif
ifeq ($(WINTOOL),y)
# Windows-native toolchains
DIRLINK = $(TOPDIR)/tools/winlink.sh
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
MAXOPTIMIZATION = -O2
else
# Linux/Cygwin-native toolchain
MKDEP = $(TOPDIR)/tools/mkdeps.sh
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
endif
CC = $(CROSSDEV)gcc
CXX = $(CROSSDEV)g++
CPP = $(CROSSDEV)gcc -E
LD = $(CROSSDEV)ld
AR = $(CROSSDEV)ar rcs
NM = $(CROSSDEV)nm
OBJCOPY = $(CROSSDEV)objcopy
OBJDUMP = $(CROSSDEV)objdump
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
ARCHOPTIMIZATION = -g
else
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
endif
ARCHCFLAGS = -fno-builtin
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
ARCHWARNINGSXX = -Wall -Wshadow
ARCHDEFINES =
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
NXFLATLDFLAGS1 = -r -d -warn-common
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
LDNXFLATFLAGS = -e main -s 2048
OBJEXT = .o
LIBEXT = .a
EXEEXT =
ifneq ($(CROSSDEV),arm-elf-)
LDFLAGS += -nostartfiles -nodefaultlibs
endif
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
LDFLAGS += -g
endif
define PREPROCESS
@echo "CPP: $1->$2"
@$(CPP) $(CPPFLAGS) $1 -o $2
endef
define COMPILE
@echo "CC: $1"
@$(CC) -c $(CFLAGS) $1 -o $2
endef
define COMPILEXX
@echo "CXX: $1"
@$(CXX) -c $(CXXFLAGS) $1 -o $2
endef
define ASSEMBLE
@echo "AS: $1"
@$(CC) -c $(AFLAGS) $1 -o $2
endef
define ARCHIVE
echo "AR: $2"; \
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
endef
define CLEAN
@rm -f *.o *.a
endef
HOSTCC = gcc
HOSTINCLUDES = -I.
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
HOSTLDFLAGS =

778
configs/nucleus2g/ostest/defconfig Executable file
View File

@ -0,0 +1,778 @@
############################################################################
# configs/nucleus2g/ostest/defconfig
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
#
# architecture selection
#
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
# processor architecture.
# CONFIG_ARCH_family - for use in C code. This identifies the
# particular chip family that the architecture is implemented
# in.
# CONFIG_ARCH_architecture - for use in C code. This identifies the
# specific architecture within the chip familyl.
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
# CONFIG_ARCH_CHIP_name - For use in C code
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
# the board that supports the particular chip or SoC.
# CONFIG_ARCH_BOARD_name - for use in C code
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
# CONFIG_DRAM_START - The start address of DRAM (physical)
# CONFIG_DRAM_END - Last address+1 of installed RAM
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
# stack. If defined, this symbol is the size of the interrupt
# stack in bytes. If not defined, the user task stacks will be
# used during interrupt handling.
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
# cause a 100 second delay during boot-up. This 100 second delay
# serves no purpose other than it allows you to calibrate
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
# the delay actually is 100 seconds.
# CONFIG_ARCH_DMA - Support DMA initialization
#
CONFIG_ARCH=arm
CONFIG_ARCH_ARM=y
CONFIG_ARCH_CORTEXM3=y
CONFIG_ARCH_CHIP=lpc17xx
CONFIG_ARCH_CHIP_LPC1768=y
CONFIG_ARCH_BOARD=nucleus2g
CONFIG_ARCH_BOARD_NUCLEUS2G=y
CONFIG_BOARD_LOOPSPERMSEC=5483
CONFIG_DRAM_SIZE=0x00008000
CONFIG_DRAM_START=0x10000000
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
CONFIG_ARCH_IRQPRIO=y
CONFIG_ARCH_INTERRUPTSTACK=n
CONFIG_ARCH_STACKDUMP=y
CONFIG_ARCH_BOOTLOADER=n
CONFIG_ARCH_LEDS=y
CONFIG_ARCH_BUTTONS=n
CONFIG_ARCH_CALIBRATION=n
CONFIG_ARCH_DMA=n
#
# Identify toolchain and linker options
#
CONFIG_LPC17_CODESOURCERYW=n
CONFIG_LPC17_CODESOURCERYL=n
CONFIG_LPC17_DEVKITARM=n
CONFIG_LPC17_RAISONANCE=n
CONFIG_LPC17_BUILDROOT=y
CONFIG_LPC17_DFU=y
#
# Individual subsystems can be enabled:
#
# Individual subsystems can be enabled:
CONFIG_LP17_ETHERNET=n
CONFIG_LP17_USBHOST=n
CONFIG_LP17_USBOTG=n
CONFIG_LP17_USBDEV=n
CONFIG_LP17_CAN1=n
CONFIG_LP17_CAN2=n
CONFIG_LP17_SPI=n
CONFIG_LP17_SSP0=n
CONFIG_LP17_SSP1=n
CONFIG_LP17_I2C0=n
CONFIG_LP17_I2C1=n
CONFIG_LP17_I2S=n
CONFIG_LP17_TMR0=n
CONFIG_LP17_TMR1=n
CONFIG_LP17_TMR2=n
CONFIG_LP17_TMR3=n
CONFIG_LP17_RIT=n
CONFIG_LP17_PWM=n
CONFIG_LP17_MCPWM=n
CONFIG_LP17_QEI=n
CONFIG_LP17_RTC=n
CONFIG_LP17_WDT=n
CONFIG_LP17_ADC=n
CONFIG_LP17_DAC=n
CONFIG_LP17_GPDMA=n
#
# LPC17xx specific serial device driver settings
#
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
# console and ttys0 (default is the UART1).
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
# This specific the size of the receive buffer
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
# being sent. This specific the size of the transmit buffer
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
# CONFIG_UARTn_2STOP - Two stop bits
#
CONFIG_UART1_SERIAL_CONSOLE=y
CONFIG_UART2_SERIAL_CONSOLE=n
CONFIG_UART3_SERIAL_CONSOLE=n
CONFIG_UART4_SERIAL_CONSOLE=n
CONFIG_UART1_TXBUFSIZE=256
CONFIG_UART2_TXBUFSIZE=256
CONFIG_UART3_TXBUFSIZE=256
CONFIG_UART4_TXBUFSIZE=256
CONFIG_UART1_RXBUFSIZE=256
CONFIG_UART2_RXBUFSIZE=256
CONFIG_UART3_RXBUFSIZE=256
CONFIG_UART4_RXBUFSIZE=256
CONFIG_UART1_BAUD=115200
CONFIG_UART2_BAUD=115200
CONFIG_UART3_BAUD=115200
CONFIG_UART4_BAUD=115200
CONFIG_UART1_BITS=8
CONFIG_UART2_BITS=8
CONFIG_UART3_BITS=8
CONFIG_UART4_BITS=8
CONFIG_UART1_PARITY=0
CONFIG_UART2_PARITY=0
CONFIG_UART3_PARITY=0
CONFIG_UART4_PARITY=0
CONFIG_UART1_2STOP=0
CONFIG_UART2_2STOP=0
CONFIG_UART3_2STOP=0
CONFIG_UART4_2STOP=0
#
# General build options
#
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
# used with many different loaders using the GNU objcopy program
# Should not be selected if you are not using the GNU toolchain.
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
# used with many different loaders using the GNU objcopy program
# Should not be selected if you are not using the GNU toolchain.
# CONFIG_RAW_BINARY - make a raw binary format file used with many
# different loaders using the GNU objcopy program. This option
# should not be selected if you are not using the GNU toolchain.
# CONFIG_HAVE_LIBM - toolchain supports libm.a
#
CONFIG_RRLOAD_BINARY=n
CONFIG_INTELHEX_BINARY=y
CONFIG_MOTOROLA_SREC=n
CONFIG_RAW_BINARY=n
CONFIG_HAVE_LIBM=n
#
# General OS setup
#
# CONFIG_EXAMPLE - identifies the subdirectory in examples
# that will be used in the build
# CONFIG_DEBUG - enables built-in debug options
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
# debug symbols (needed for use with a debugger).
# CONFIG_MM_REGIONS - If the architecture includes multiple
# regions of memory to allocate from, this specifies the
# number of memory regions that the memory manager must
# handle and enables the API mm_addregion(start, end);
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
# time console output
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
# or TICKS_PER_MSEC=10. This setting may be defined to
# inform NuttX that the processor hardware is providing
# system timer interrupts at some interrupt interval other
# than 10 msec.
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
# this number of milliseconds; Round robin scheduling can
# be disabled by setting this value to zero.
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
# scheduler to monitor system performance
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
# task name to save in the TCB. Useful if scheduler
# instrumentation is selected. Set to zero to disable.
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
# Used to initialize the internal time logic.
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
# You would only need this if you are concerned about accurate
# time conversions in the past or in the distant future.
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
# would only need this if you are concerned about accurate
# time conversion in the distand past. You must also define
# CONFIG_GREGORIAN_TIME in order to use Julian time.
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
# provides /dev/console. Enables stdout, stderr, stdin.
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
# driver (minimul support)
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
# errorcheck mutexes. Enables pthread_mutexattr_settype().
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
# inheritance on mutexes and semaphores.
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
# inheritance is enabled. It defines the maximum number of
# different threads (minus one) that can take counts on a
# semaphore with priority inheritance support. This may be
# set to zero if priority inheritance is disabled OR if you
# are only using semaphores as mutexes (only one holder) OR
# if no more than two threads participate using a counting
# semaphore.
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
# then this setting is the maximum number of higher priority
# threads (minus 1) than can be waiting for another thread
# to release a count on a semaphore. This value may be set
# to zero if no more than one thread is expected to wait for
# a semaphore.
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
# by task_create() when a new task is started. If set, all
# files/drivers will appear to be closed in the new task.
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
# three file descriptors (stdin, stdout, stderr) by task_create()
# when a new task is started. If set, all files/drivers will
# appear to be closed in the new task except for stdin, stdout,
# and stderr.
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
# desciptors by task_create() when a new task is started. If
# set, all sockets will appear to be closed in the new task.
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
# This format will support execution of NuttX binaries located
# in a ROMFS filesystem (see examples/nxflat).
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
# handle delayed processing from interrupt handlers. This feature
# is required for some drivers but, if there are not complaints,
# can be safely disabled. The worker thread also performs
# garbage collection -- completing any delayed memory deallocations
# from interrupt handlers. If the worker thread is disabled,
# then that clean will be performed by the IDLE thread instead
# (which runs at the lowest of priority and may not be appropriate
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
# is enabled, then the following options can also be used:
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
# thread. Default: 50
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
# work in units of microseconds. Default: 50*1000 (50 MS).
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
# the worker thread. Default: 4
#
CONFIG_EXAMPLE=ostest
CONFIG_DEBUG=n
CONFIG_DEBUG_VERBOSE=n
CONFIG_DEBUG_SYMBOLS=n
CONFIG_MM_REGIONS=1
CONFIG_ARCH_LOWPUTC=y
CONFIG_RR_INTERVAL=200
CONFIG_SCHED_INSTRUMENTATION=n
CONFIG_TASK_NAME_SIZE=0
CONFIG_START_YEAR=2009
CONFIG_START_MONTH=9
CONFIG_START_DAY=21
CONFIG_GREGORIAN_TIME=n
CONFIG_JULIAN_TIME=n
CONFIG_DEV_CONSOLE=y
CONFIG_DEV_LOWCONSOLE=y
CONFIG_MUTEX_TYPES=n
CONFIG_PRIORITY_INHERITANCE=n
CONFIG_SEM_PREALLOCHOLDERS=0
CONFIG_SEM_NNESTPRIO=0
CONFIG_FDCLONE_DISABLE=n
CONFIG_FDCLONE_STDIO=n
CONFIG_SDCLONE_DISABLE=y
CONFIG_NXFLAT=n
CONFIG_SCHED_WORKQUEUE=n
CONFIG_SCHED_WORKPRIORITY=50
CONFIG_SCHED_WORKPERIOD=(50*1000)
CONFIG_SCHED_WORKSTACKSIZE=1024
CONFIG_SIG_SIGWORK=4
#
# The following can be used to disable categories of
# APIs supported by the OS. If the compiler supports
# weak functions, then it should not be necessary to
# disable functions unless you want to restrict usage
# of those APIs.
#
# There are certain dependency relationships in these
# features.
#
# o mq_notify logic depends on signals to awaken tasks
# waiting for queues to become full or empty.
# o pthread_condtimedwait() depends on signals to wake
# up waiting tasks.
#
CONFIG_DISABLE_CLOCK=n
CONFIG_DISABLE_POSIX_TIMERS=n
CONFIG_DISABLE_PTHREAD=n
CONFIG_DISABLE_SIGNALS=n
CONFIG_DISABLE_MQUEUE=n
CONFIG_DISABLE_MOUNTPOINT=y
CONFIG_DISABLE_ENVIRON=y
CONFIG_DISABLE_POLL=y
#
# Misc libc settings
#
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
# little smaller if we do not support fieldwidthes
#
CONFIG_NOPRINTF_FIELDWIDTH=n
#
# Allow for architecture optimized implementations
#
# The architecture can provide optimized versions of the
# following to improve system performance
#
CONFIG_ARCH_MEMCPY=n
CONFIG_ARCH_MEMCMP=n
CONFIG_ARCH_MEMMOVE=n
CONFIG_ARCH_MEMSET=n
CONFIG_ARCH_STRCMP=n
CONFIG_ARCH_STRCPY=n
CONFIG_ARCH_STRNCPY=n
CONFIG_ARCH_STRLEN=n
CONFIG_ARCH_BZERO=n
CONFIG_ARCH_KMALLOC=n
CONFIG_ARCH_KZMALLOC=n
CONFIG_ARCH_KFREE=n
#
# Sizes of configurable things (0 disables)
#
# CONFIG_MAX_TASKS - The maximum number of simultaneously
# active tasks. This value must be a power of two.
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
# of parameters that a task may receive (i.e., maxmum value
# of 'argc')
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
# specific data that can be retained
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
# descriptors (one for each open)
# CONFIG_NFILE_STREAMS - The maximum number of streams that
# can be fopen'ed
# CONFIG_NAME_MAX - The maximum size of a file name.
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_NUNGET_CHARS - Number of characters that can be
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
# structures. The system manages a pool of preallocated
# message structures to minimize dynamic allocations
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
# a fixed payload size given by this settin (does not include
# other message structure overhead.
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
# can be passed to a watchdog handler
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
# structures. The system manages a pool of preallocated
# watchdog structures to minimize dynamic allocations
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
# timer structures. The system manages a pool of preallocated
# timer structures to minimize dynamic allocations. Set to
# zero for all dynamic allocations.
#
CONFIG_MAX_TASKS=16
CONFIG_MAX_TASK_ARGS=4
CONFIG_NPTHREAD_KEYS=4
CONFIG_NFILE_DESCRIPTORS=8
CONFIG_NFILE_STREAMS=8
CONFIG_NAME_MAX=32
CONFIG_STDIO_BUFFER_SIZE=256
CONFIG_NUNGET_CHARS=2
CONFIG_PREALLOC_MQ_MSGS=4
CONFIG_MQ_MAXMSGSIZE=32
CONFIG_MAX_WDOGPARMS=2
CONFIG_PREALLOC_WDOGS=4
CONFIG_PREALLOC_TIMERS=4
#
# Filesystem configuration
#
# CONFIG_FS_FAT - Enable FAT filesystem support
# CONFIG_FAT_SECTORSIZE - Max supported sector size
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
CONFIG_FS_FAT=n
CONFIG_FS_ROMFS=n
#
# SPI-based MMC/SD driver
#
# CONFIG_MMCSD_NSLOTS
# Number of MMC/SD slots supported by the driver
# CONFIG_MMCSD_READONLY
# Provide read-only access (default is read/write)
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
# Default is 20MHz.
#
CONFIG_MMCSD_NSLOTS=1
CONFIG_MMCSD_READONLY=n
CONFIG_MMCSD_SPICLOCK=12500000
#
# Block driver buffering
#
# CONFIG_FS_READAHEAD
# Enable read-ahead buffering
# CONFIG_FS_WRITEBUFFER
# Enable write buffering
#
CONFIG_FS_READAHEAD=n
CONFIG_FS_WRITEBUFFER=n
#
# SDIO-based MMC/SD driver
#
# CONFIG_SDIO_DMA
# SDIO driver supports DMA
# CONFIG_MMCSD_MMCSUPPORT
# Enable support for MMC cards
# CONFIG_MMCSD_HAVECARDDETECT
# SDIO driver card detection is 100% accurate
#
CONFIG_SDIO_DMA=n
CONFIG_MMCSD_MMCSUPPORT=n
CONFIG_MMCSD_HAVECARDDETECT=n
#
# TCP/IP and UDP support via uIP
# CONFIG_NET - Enable or disable all network features
# CONFIG_NET_IPv6 - Build in support for IPv6
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
# CONFIG_NET_BUFSIZE - uIP buffer size
# CONFIG_NET_TCP - TCP support on or off
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
# accept() is called. The size of the backlog is selected when listen() is called.
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
# CONFIG_NET_UDP - UDP support on or off
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
# CONFIG_NET_ICMP - ICMP ping response support on or off
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
# CONFIG_NET_STATISTICS - uIP statistics on or off
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
# CONFIG_NET_BROADCAST - Broadcast support
# CONFIG_NET_LLH_LEN - The link level header length
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
#
CONFIG_NET=n
CONFIG_NET_IPv6=n
CONFIG_NSOCKET_DESCRIPTORS=0
CONFIG_NET_SOCKOPTS=y
CONFIG_NET_BUFSIZE=420
CONFIG_NET_TCP=n
CONFIG_NET_TCP_CONNS=40
CONFIG_NET_MAX_LISTENPORTS=40
CONFIG_NET_UDP=n
CONFIG_NET_UDP_CHECKSUMS=y
#CONFIG_NET_UDP_CONNS=10
CONFIG_NET_ICMP=n
CONFIG_NET_ICMP_PING=n
#CONFIG_NET_PINGADDRCONF=0
CONFIG_NET_STATISTICS=y
#CONFIG_NET_RECEIVE_WINDOW=
#CONFIG_NET_ARPTAB_SIZE=8
CONFIG_NET_BROADCAST=n
#CONFIG_NET_LLH_LEN=14
#CONFIG_NET_FWCACHE_SIZE=2
#
# UIP Network Utilities
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
#
CONFIG_NET_DHCP_LIGHT=n
CONFIG_NET_RESOLV_ENTRIES=4
#
# USB Device Configuration
#
# CONFIG_USBDEV
# Enables USB device support
# CONFIG_USBDEV_ISOCHRONOUS
# Build in extra support for isochronous endpoints
# CONFIG_USBDEV_DUALSPEED
# Hardware handles high and full speed operation (USB 2.0)
# CONFIG_USBDEV_SELFPOWERED
# Will cause USB features to indicate that the device is
# self-powered
# CONFIG_USBDEV_MAXPOWER
# Maximum power consumption in mA
# CONFIG_USBDEV_TRACE
# Enables USB tracing for debug
# CONFIG_USBDEV_TRACE_NRECORDS
# Number of trace entries to remember
#
CONFIG_USBDEV=n
CONFIG_USBDEV_ISOCHRONOUS=n
CONFIG_USBDEV_DUALSPEED=n
CONFIG_USBDEV_SELFPOWERED=y
CONFIG_USBDEV_REMOTEWAKEUP=n
CONFIG_USBDEV_MAXPOWER=100
CONFIG_USBDEV_TRACE=n
CONFIG_USBDEV_TRACE_NRECORDS=128
#
# USB Serial Device Configuration
#
# CONFIG_USBSER
# Enable compilation of the USB serial driver
# CONFIG_USBSER_EPINTIN
# The logical 7-bit address of a hardware endpoint that supports
# interrupt IN operation
# CONFIG_USBSER_EPBULKOUT
# The logical 7-bit address of a hardware endpoint that supports
# bulk OUT operation
# CONFIG_USBSER_EPBULKIN
# The logical 7-bit address of a hardware endpoint that supports
# bulk IN operation
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
# The number of write/read requests that can be in flight
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
# The vendor ID code/string
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
# The product ID code/string
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
# Size of the serial receive/transmit buffers
#
CONFIG_USBSER=n
CONFIG_USBSER_EPINTIN=1
CONFIG_USBSER_EPBULKOUT=2
CONFIG_USBSER_EPBULKIN=3
CONFIG_USBSER_NWRREQS=4
CONFIG_USBSER_NRDREQS=4
CONFIG_USBSER_VENDORID=0x067b
CONFIG_USBSER_PRODUCTID=0x2303
CONFIG_USBSER_VENDORSTR="Nuttx"
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
CONFIG_USBSER_RXBUFSIZE=512
CONFIG_USBSER_TXBUFSIZE=512
#
# USB Storage Device Configuration
#
# CONFIG_USBSTRG
# Enable compilation of the USB storage driver
# CONFIG_USBSTRG_EP0MAXPACKET
# Max packet size for endpoint 0
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
# The logical 7-bit address of a hardware endpoints that support
# bulk OUT and IN operations
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
# The number of write/read requests that can be in flight
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
# The size of the buffer in each write/read request. This
# value needs to be at least as large as the endpoint
# maxpacket and ideally as large as a block device sector.
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
# The vendor ID code/string
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
# The product ID code/string
# CONFIG_USBSTRG_REMOVABLE
# Select if the media is removable
#
CONFIG_USBSTRG=n
CONFIG_USBSTRG_EP0MAXPACKET=64
CONFIG_USBSTRG_EPBULKOUT=2
CONFIG_USBSTRG_EPBULKIN=5
CONFIG_USBSTRG_NRDREQS=2
CONFIG_USBSTRG_NWRREQS=2
CONFIG_USBSTRG_BULKINREQLEN=256
CONFIG_USBSTRG_BULKOUTREQLEN=256
CONFIG_USBSTRG_VENDORID=0x584e
CONFIG_USBSTRG_VENDORSTR="NuttX"
CONFIG_USBSTRG_PRODUCTID=0x5342
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
CONFIG_USBSTRG_VERSIONNO=0x0399
CONFIG_USBSTRG_REMOVABLE=y
#
# Settings for examples/uip
#
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_UIP_DHCPC=n
#
# Settings for examples/nettest
CONFIG_EXAMPLE_NETTEST_SERVER=n
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
CONFIG_EXAMPLE_NETTEST_NOMAC=n
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
#
# Settings for examples/ostest
#
CONFIG_EXAMPLES_OSTEST_LOOPS=1
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
#
# Settings for examples/nsh
#
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
# specific initialization (nsh_archinitialize()).
#
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
#
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
#
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
CONFIG_EXAMPLES_NSH_STRERROR=n
CONFIG_EXAMPLES_NSH_LINELEN=64
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
CONFIG_EXAMPLES_NSH_DISABLEBG=n
CONFIG_EXAMPLES_NSH_ROMFSETC=n
CONFIG_EXAMPLES_NSH_CONSOLE=y
CONFIG_EXAMPLES_NSH_TELNET=n
CONFIG_EXAMPLES_NSH_ARCHINIT=n
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
CONFIG_EXAMPLES_NSH_DHCPC=n
CONFIG_EXAMPLES_NSH_NOMAC=n
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
CONFIG_EXAMPLES_NSH_FATDEVNO=1
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
#
# Architecture-specific NSH options
#
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
#
# Settings for examples/usbserial
#
# CONFIG_EXAMPLES_USBSERIAL_INONLY
# Only verify IN (device-to-host) data transfers. Default: both
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
# Only verify OUT (host-to-device) data transfers. Default: both
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
# Send only small, single packet messages. Default: Send large and small.
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
# Send only large, multi-packet messages. Default: Send large and small.
#
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
#
# Stack and heap information
#
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
# operation from FLASH but must copy initialized .data sections to RAM.
# (should also be =n for the LPC17xx which always runs from flash)
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
# but copy themselves entirely into RAM for better performance.
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
# all stack operations outside of the nuttx model.
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
# This is the thread that (1) performs the inital boot of the system up
# to the point where user_start() is spawned, and (2) there after is the
# IDLE thread that executes only when there is no other thread ready to
# run.
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
# for the main user thread that begins at the user_start() entry point.
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
# CONFIG_HEAP_BASE - The beginning of the heap
# CONFIG_HEAP_SIZE - The size of the heap
#
CONFIG_BOOT_RUNFROMFLASH=n
CONFIG_BOOT_COPYTORAM=n
CONFIG_CUSTOM_STACK=n
CONFIG_STACK_POINTER=
CONFIG_IDLETHREAD_STACKSIZE=1024
CONFIG_USERMAIN_STACKSIZE=2048
CONFIG_PTHREAD_STACK_MIN=256
CONFIG_PTHREAD_STACK_DEFAULT=2048
CONFIG_HEAP_BASE=
CONFIG_HEAP_SIZE=

109
configs/nucleus2g/ostest/ld.script Executable file
View File

@ -0,0 +1,109 @@
/****************************************************************************
* configs/nucleus2g/ostest/ld.script
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
* into the 32Kb CPU SRAM address range.
*/
MEMORY
{
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
}
OUTPUT_ARCH(arm)
ENTRY(_stext)
SECTIONS
{
.text : {
_stext = ABSOLUTE(.);
*(.vectors)
*(.text .text.*)
*(.fixup)
*(.gnu.warning)
*(.rodata .rodata.*)
*(.gnu.linkonce.t.*)
*(.glue_7)
*(.glue_7t)
*(.got)
*(.gcc_except_table)
*(.gnu.linkonce.r.*)
_etext = ABSOLUTE(.);
} > flash
_eronly = ABSOLUTE(.); /* See below */
.data : {
_sdata = ABSOLUTE(.);
*(.data .data.*)
*(.gnu.linkonce.d.*)
CONSTRUCTORS
_edata = ABSOLUTE(.);
} > sram AT > flash
.ARM.extab : {
*(.ARM.extab*)
} >sram
.ARM.exidx : {
__exidx_start = ABSOLUTE(.);
*(.ARM.exidx*)
__exidx_end = ABSOLUTE(.);
} >sram
.bss : { /* BSS */
_sbss = ABSOLUTE(.);
*(.bss .bss.*)
*(.gnu.linkonce.b.*)
*(COMMON)
_ebss = ABSOLUTE(.);
} > sram
/* Stabs debugging sections. */
.stab 0 : { *(.stab) }
.stabstr 0 : { *(.stabstr) }
.stab.excl 0 : { *(.stab.excl) }
.stab.exclstr 0 : { *(.stab.exclstr) }
.stab.index 0 : { *(.stab.index) }
.stab.indexstr 0 : { *(.stab.indexstr) }
.comment 0 : { *(.comment) }
.debug_abbrev 0 : { *(.debug_abbrev) }
.debug_info 0 : { *(.debug_info) }
.debug_line 0 : { *(.debug_line) }
.debug_pubnames 0 : { *(.debug_pubnames) }
.debug_aranges 0 : { *(.debug_aranges) }
}

47
configs/nucleus2g/ostest/setenv.sh Executable file
View File

@ -0,0 +1,47 @@
#!/bin/bash
# configs/nucleus2g/ostest/setenv.sh
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
if [ "$(basename $0)" = "setenv.sh" ] ; then
echo "You must source this script, not run it!" 1>&2
exit 1
fi
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
WD=`pwd`
export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
echo "PATH : ${PATH}"

84
configs/nucleus2g/src/Makefile Executable file
View File

@ -0,0 +1,84 @@
############################################################################
# configs/nucleus2g/src/Makefile
#
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in
# the documentation and/or other materials provided with the
# distribution.
# 3. Neither the name NuttX nor the names of its contributors may be
# used to endorse or promote products derived from this software
# without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
############################################################################
-include $(TOPDIR)/Make.defs
CFLAGS += -I$(TOPDIR)/sched
ASRCS =
AOBJS = $(ASRCS:.S=$(OBJEXT))
CSRCS = up_boot.c up_leds.c
COBJS = $(CSRCS:.c=$(OBJEXT))
SRCS = $(ASRCS) $(CSRCS)
OBJS = $(AOBJS) $(COBJS)
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
ifeq ($(WINTOOL),y)
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
-I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
else
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
endif
all: libboard$(LIBEXT)
$(AOBJS): %$(OBJEXT): %.S
$(call ASSEMBLE, $<, $@)
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
$(call COMPILE, $<, $@)
libboard$(LIBEXT): $(OBJS)
@( for obj in $(OBJS) ; do \
$(call ARCHIVE, $@, $${obj}); \
done ; )
.depend: Makefile $(SRCS)
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
@touch $@
depend: .depend
clean:
@rm -f libboard$(LIBEXT) *~ .*.swp
$(call CLEAN)
distclean: clean
@rm -f Make.dep .depend
-include Make.dep

89
configs/nucleus2g/src/nucleus2g_internal.h Executable file
View File

@ -0,0 +1,89 @@
/************************************************************************************
* configs/nucleus2g/src/nucleus2g_internal.h
* arch/arm/src/board/nucleus2g_internal.n
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
#ifndef _CONFIGS_NUCLEUS2G_SRC_NUCLEUS2G_INTERNAL_H
#define _CONFIGS_NUCLEUS2G_SRC_NUCLEUS2G_INTERNAL_H
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <nuttx/compiler.h>
/************************************************************************************
* Definitions
************************************************************************************/
/* NUCLEUS-2G GPIO Pin Definitions **************************************************/
/************************************************************************************
* Public Types
************************************************************************************/
/************************************************************************************
* Public data
************************************************************************************/
#ifndef __ASSEMBLY__
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_spiinitialize
*
* Description:
* Called to configure SPI chip select GPIO pins for the NUCLEUS-2G board.
*
************************************************************************************/
extern void weak_function lpc17_spiinitialize(void);
/************************************************************************************
* Name: lpc17_usbinitialize
*
* Description:
* Called to setup USB-related GPIO pins for the NUCLEUS-2G board.
*
************************************************************************************/
extern void weak_function lpc17_usbinitialize(void);
#endif /* __ASSEMBLY__ */
#endif /* _CONFIGS_NUCLEUS2G_SRC_NUCLEUS2G_INTERNAL_H */

103
configs/nucleus2g/src/up_boot.c Executable file
View File

@ -0,0 +1,103 @@
/************************************************************************************
* configs/nucleus2g/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "nucleus2g_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_boardinitialize
*
* Description:
* All LPC17xx architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void lpc17_boardinitialize(void)
{
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
* lpc17_spiinitialize() has been brought into the link.
*/
#if defined(CONFIG_LPC17_SPI)
if (lpc17_spiinitialize)
{
lpc17_spiinitialize();
}
#endif
/* Initialize USB if 1) USBDEV is selected, 2) the USB controller is not
* disabled, and 3) the weak function lpc17_usbinitialize() has been brought
* into the build.
*/
#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC17_USBDEV)
if (lpc17_usbinitialize)
{
lpc17_usbinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
up_ledinit();
#endif
}

111
configs/nucleus2g/src/up_leds.c Executable file
View File

@ -0,0 +1,111 @@
/****************************************************************************
* configs/nucleus2g/src/up_leds.c
* arch/arm/src/board/up_leds.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <stdint.h>
#include <stdbool.h>
#include <debug.h>
#include <arch/board/board.h>
#include "chip.h"
#include "up_arch.h"
#include "up_internal.h"
#include "lpc17_internal.h"
#include "nucleus2g_internal.h"
#ifdef CONFIG_ARCH_LEDS
/****************************************************************************
* Definitions
****************************************************************************/
/* Enables debug output from this file (needs CONFIG_DEBUG with
* CONFIG_DEBUG_VERBOSE too)
*/
#undef LED_DEBUG /* Define to enable debug */
#ifdef LED_DEBUG
# define leddbg lldbg
# define ledvdbg llvdbg
#else
# define leddbg(x...)
# define ledvdbg(x...)
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
****************************************************************************/
void up_ledinit(void)
{
}
/****************************************************************************
* Name: up_ledon
****************************************************************************/
void up_ledon(int led)
{
}
/****************************************************************************
* Name: up_ledoff
****************************************************************************/
void up_ledoff(int led)
{
}
#endif /* CONFIG_ARCH_LEDS */