Add config for 2G Engineering Nucleus LPC1768 board
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@2728 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo
parent
1bf43e8332
commit
f2c699c3c6
@ -128,10 +128,10 @@
|
||||
#define LPC17_IRQ_PLL0 (LPC17_IRQ_EXTINT+16) /* PLL0 (Main PLL) PLL0 Lock (PLOCK0) */
|
||||
#define LPC17_IRQ_RTC (LPC17_IRQ_EXTINT+17) /* RTC Counter Increment (RTCCIF)
|
||||
* Alarm (RTCALF) */
|
||||
#define LPC17_IRQ_EINT0 (LPC17_IRQ_EXTINT+18) /* External Interrupt External Interrupt 0 (EINT0) */
|
||||
#define LPC17_IRQ_EINT1 (LPC17_IRQ_EXTINT+19) /* External Interrupt External Interrupt 1 (EINT1) */
|
||||
#define LPC17_IRQ_EINT2 (LPC17_IRQ_EXTINT+20) /* External Interrupt External Interrupt 2 (EINT2) */
|
||||
#define LPC17_IRQ_EINT3 (LPC17_IRQ_EXTINT+21) /* External Interrupt External Interrupt 3 (EINT3)
|
||||
#define LPC17_IRQ_EINT0 (LPC17_IRQ_EXTINT+18) /* External Interrupt 0 (EINT0) */
|
||||
#define LPC17_IRQ_EINT1 (LPC17_IRQ_EXTINT+19) /* External Interrupt 1 (EINT1) */
|
||||
#define LPC17_IRQ_EINT2 (LPC17_IRQ_EXTINT+20) /* External Interrupt 2 (EINT2) */
|
||||
#define LPC17_IRQ_EINT3 (LPC17_IRQ_EXTINT+21) /* External Interrupt 3 (EINT3)
|
||||
* Note: EINT3 channel is shared with GPIO interrupts */
|
||||
#define LPC17_IRQ_ADC (LPC17_IRQ_EXTINT+22) /* ADC A/D Converter end of conversion */
|
||||
#define LPC17_IRQ_BOD (LPC17_IRQ_EXTINT+23) /* BOD Brown Out detect */
|
||||
|
||||
63
arch/arm/src/lpc17xx/Make.defs
Executable file
63
arch/arm/src/lpc17xx/Make.defs
Executable file
@ -0,0 +1,63 @@
|
||||
############################################################################
|
||||
# arch/arm/src/lpc17xx/Make.defs
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
# The start-up, "head", file
|
||||
|
||||
HEAD_ASRC = lpc17_vectors.S
|
||||
|
||||
# Common ARM and Cortex-M3 files
|
||||
|
||||
CMN_ASRCS = up_saveusercontext.S up_fullcontextrestore.S up_switchcontext.S
|
||||
CMN_CSRCS = up_assert.c up_blocktask.c up_copystate.c up_createstack.c \
|
||||
up_mdelay.c up_udelay.c up_exit.c up_idle.c up_initialize.c \
|
||||
up_initialstate.c up_interruptcontext.c up_modifyreg8.c \
|
||||
up_modifyreg16.c up_modifyreg32.c up_releasepending.c \
|
||||
up_releasestack.c up_reprioritizertr.c up_schedulesigaction.c \
|
||||
up_sigdeliver.c up_unblocktask.c up_usestack.c up_doirq.c \
|
||||
up_hardfault.c up_svcall.c
|
||||
|
||||
# Required SAM3U files
|
||||
|
||||
CHIP_ASRCS =
|
||||
CHIP_CSRCS = lpc17_start.c
|
||||
#CHIP_CSRCS = lpc17_allocateheap.c lpc17_clockconfig.c lpc17_gpioirq.c \
|
||||
# lpc17_irq.c lpc17_lowputc.c lpc17_pio.c lpc17_serial.c \
|
||||
# lpc17_start.c lpc17_timerisr.c
|
||||
|
||||
# Configuration-dependent SAM3U files
|
||||
|
||||
ifeq ($(CONFIG_LPC17_DMA),y)
|
||||
CHIP_CSRCS += lpc17_dmac.c
|
||||
endif
|
||||
@ -48,7 +48,7 @@
|
||||
|
||||
/* Get customizations for each supported chip */
|
||||
|
||||
#if defined(CONFIG_LPC17XX_LPC1769) || defined(CONFIG_LPC17XX_LPC1768)
|
||||
#if defined(CONFIG_ARCH_CHIP_LPC1769) || defined(CONFIG_ARCH_CHIP_LPC1768)
|
||||
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
|
||||
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
|
||||
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
|
||||
@ -58,7 +58,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1767)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1767)
|
||||
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
|
||||
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
|
||||
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
|
||||
@ -68,7 +68,7 @@
|
||||
# define LPC17_NCAN 0 /* No CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1766)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1766)
|
||||
# define LPC17_FLASH_SIZE (256*1024) /* 256Kb */
|
||||
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
|
||||
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
|
||||
@ -78,7 +78,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1765)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1765)
|
||||
# define LPC17_FLASH_SIZE (256*1024) /* 256Kb */
|
||||
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
|
||||
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
|
||||
@ -88,7 +88,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1764)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1764)
|
||||
# define LPC17_FLASH_SIZE (128*1024) /* 128Kb */
|
||||
# define LPC17_SRAM_SIZE (32*1024) /* 32Kb */
|
||||
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
|
||||
@ -98,7 +98,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 0 /* No I2S modules */
|
||||
# define LPC17_NDAC 0 /* No DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1759)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1759)
|
||||
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
|
||||
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
|
||||
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
|
||||
@ -108,7 +108,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1758)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1758)
|
||||
# define LPC17_FLASH_SIZE (512*1024) /* 512Kb */
|
||||
# define LPC17_SRAM_SIZE (64*1024) /* 64Kb */
|
||||
# define LPC17_NETHCONTROLLERS 1 /* One Ethernet controller */
|
||||
@ -118,7 +118,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1756)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1756)
|
||||
# define LPC17_FLASH_SIZE (256*1024) /* 256Kb */
|
||||
# define LPC17_SRAM_SIZE (32*1024) /* 32Kb */
|
||||
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
|
||||
@ -128,7 +128,7 @@
|
||||
# define LPC17_NCAN 2 /* Two CAN controllers */
|
||||
# define LPC17_NI2S 1 /* One I2S module */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1754)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1754)
|
||||
# define LPC17_FLASH_SIZE (128*1024) /* 128Kb */
|
||||
# define LPC17_SRAM_SIZE (32*1024) /* 32Kb */
|
||||
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
|
||||
@ -138,7 +138,7 @@
|
||||
# define LPC17_NCAN 1 /* One CAN controller */
|
||||
# define LPC17_NI2S 0 /* No I2S modules */
|
||||
# define LPC17_NDAC 1 /* One DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1752)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1752)
|
||||
# define LPC17_FLASH_SIZE (64*1024) /* 65Kb */
|
||||
# define LPC17_SRAM_SIZE (16*1024) /* 16Kb */
|
||||
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
|
||||
@ -148,7 +148,7 @@
|
||||
# define LPC17_NCAN 1 /* One CAN controller */
|
||||
# define LPC17_NI2S 0 /* No I2S modules */
|
||||
# define LPC17_NDAC 0 /* No DAC module */
|
||||
#elif defined(CONFIG_LPC17XX_LPC1751)
|
||||
#elif defined(CONFIG_ARCH_CHIP_LPC1751)
|
||||
# define LPC17_FLASH_SIZE (32*1024) /* 32Kb */
|
||||
# define LPC17_SRAM_SIZE (8*1024) /* 8Kb */
|
||||
# define LPC17_NETHCONTROLLERS 0 /* No Ethernet controller */
|
||||
@ -166,7 +166,7 @@
|
||||
* file for the proper setup
|
||||
*/
|
||||
|
||||
#include "lpc17xx_memorymap.h"
|
||||
#include "lpc17_memorymap.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
|
||||
219
arch/arm/src/lpc17xx/lpc17_internal.h
Executable file
219
arch/arm/src/lpc17xx/lpc17_internal.h
Executable file
@ -0,0 +1,219 @@
|
||||
/************************************************************************************
|
||||
* arch/arm/src/lpc17xx/lpc17_internal.h
|
||||
*
|
||||
* Copyright (C) 2009-2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H
|
||||
#define __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
#include <sys/types.h>
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
|
||||
#include "up_internal.h"
|
||||
#include "chip.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Configuration ********************************************************************/
|
||||
|
||||
/* Bit-encoded input to lpc17_configgpio() ******************************************/
|
||||
|
||||
/* GPIO pin definitions *************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Inline Functions
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_clockconfig
|
||||
*
|
||||
* Description:
|
||||
* Called to initialize the LPC17XX. This does whatever setup is needed to put the
|
||||
* MCU in a usable state. This includes the initialization of clocking using the
|
||||
* settings in board.h.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void lpc17_clockconfig(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_lowsetup
|
||||
*
|
||||
* Description:
|
||||
* Called at the very beginning of _start. Performs low level initialization
|
||||
* including setup of the console UART. This UART done early so that the serial
|
||||
* console is available for debugging very early in the boot sequence.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void lpc17_lowsetup(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_gpioirqinitialize
|
||||
*
|
||||
* Description:
|
||||
* Initialize logic to support a second level of interrupt decoding for GPIO pins.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
EXTERN void lpc17_gpioirqinitialize(void);
|
||||
#else
|
||||
# define lpc17_gpioirqinitialize()
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_configgpio
|
||||
*
|
||||
* Description:
|
||||
* Configure a GPIO pin based on bit-encoded description of the pin.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN int lpc17_configgpio(uint16_t cfgset);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_gpiowrite
|
||||
*
|
||||
* Description:
|
||||
* Write one or zero to the selected GPIO pin
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void lpc17_gpiowrite(uint16_t pinset, bool value);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_gpioread
|
||||
*
|
||||
* Description:
|
||||
* Read one or zero from the selected GPIO pin
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN bool lpc17_gpioread(uint16_t pinset);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_gpioirq
|
||||
*
|
||||
* Description:
|
||||
* Configure an interrupt for the specified GPIO pin.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
EXTERN void lpc17_gpioirq(uint16_t pinset);
|
||||
#else
|
||||
# define lpc17_gpioirq(pinset)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_gpioirqenable
|
||||
*
|
||||
* Description:
|
||||
* Enable the interrupt for specified GPIO IRQ
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
EXTERN void lpc17_gpioirqenable(int irq);
|
||||
#else
|
||||
# define lpc17_gpioirqenable(irq)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_gpioirqdisable
|
||||
*
|
||||
* Description:
|
||||
* Disable the interrupt for specified GPIO IRQ
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_GPIO_IRQ
|
||||
EXTERN void lpc17_gpioirqdisable(int irq);
|
||||
#else
|
||||
# define lpc17_gpioirqdisable(irq)
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Function: lpc17_dumpgpio
|
||||
*
|
||||
* Description:
|
||||
* Dump all GPIO registers associated with the base address of the provided pinset.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG_GPIO
|
||||
EXTERN int lpc17_dumpgpio(uint32_t pinset, const char *msg);
|
||||
#else
|
||||
# define lpc17_dumpgpio(p,m)
|
||||
#endif
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_ARM_SRC_LPC17XX_LPC17_INTERNAL_H */
|
||||
@ -50,12 +50,12 @@
|
||||
|
||||
/* Memory Map ***********************************************************************/
|
||||
|
||||
#define LPC17_FLASH_BASE 0x00000000 /* -0x1fffffff: On-chip non-volatilenmemory */
|
||||
#define LPC17_FLASH_BASE 0x00000000 /* -0x1fffffff: On-chip non-volatile memory */
|
||||
#define LPC17_SRAM_BASE 0x10000000 /* -0x10007fff: On-chip SRAM (devices <=32Kb) */
|
||||
#define LPC17_ROM_BASE 0x1fff0000 /* -0x1fffffff: 8Kb Boot ROM with flash services */
|
||||
#define LPC17_AHBSRAM_BASE 0x20000000 /* -0x3fffffff: On-chip AHB SRAM (devices >32Kb) */
|
||||
# define LPC17_SRAM_BANK0 0x20070000 /* -0x2007ffff: On-chip AHB SRAM Bank0 (devices >=32Kb) */
|
||||
# define LPC17_SRAM_BANK1 0x20080000 /* -0x2008ffff: On-chip AHB SRAM Bank0 (devices 64Kb) */
|
||||
# define LPC17_SRAM_BANK1 0x20080000 /* -0x2008ffff: On-chip AHB SRAM Bank1 (devices 64Kb) */
|
||||
#define LPC17_GPIO_BASE 0x2009c000 /* -0x2009ffff: GPIO */
|
||||
#define LPC17_APB_BASE 0x40000000 /* -0x5fffffff: APB Peripherals */
|
||||
# define LPC17_APB0_BASE 0x40000000 /* -0x4007ffff: APB0 Peripherals */
|
||||
|
||||
151
arch/arm/src/lpc17xx/lpc17_start.c
Executable file
151
arch/arm/src/lpc17xx/lpc17_start.c
Executable file
@ -0,0 +1,151 @@
|
||||
/****************************************************************************
|
||||
* arch/arm/src/lpc17xx/lpc17_start.c
|
||||
* arch/arm/src/chip/lpc17_start.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <assert.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <nuttx/init.h>
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
|
||||
#include "lpc17_internal.h"
|
||||
|
||||
/****************************************************************************
|
||||
* Private Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: showprogress
|
||||
*
|
||||
* Description:
|
||||
* Print a character on the UART to show boot status.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
#ifdef CONFIG_DEBUG
|
||||
# define showprogress(c) up_lowputc(c)
|
||||
#else
|
||||
# define showprogress(c)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: _start
|
||||
*
|
||||
* Description:
|
||||
* This is the reset entry point.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
void __start(void)
|
||||
{
|
||||
const uint32_t *src;
|
||||
uint32_t *dest;
|
||||
|
||||
/* Configure the uart so that we can get debug output as soon as possible */
|
||||
|
||||
lpc17_clockconfig();
|
||||
lpc17_lowsetup();
|
||||
showprogress('A');
|
||||
|
||||
/* Clear .bss. We'll do this inline (vs. calling memset) just to be
|
||||
* certain that there are no issues with the state of global variables.
|
||||
*/
|
||||
|
||||
for (dest = &_sbss; dest < &_ebss; )
|
||||
{
|
||||
*dest++ = 0;
|
||||
}
|
||||
showprogress('B');
|
||||
|
||||
/* Move the intialized data section from his temporary holding spot in
|
||||
* FLASH into the correct place in SRAM. The correct place in SRAM is
|
||||
* give by _sdata and _edata. The temporary location is in FLASH at the
|
||||
* end of all of the other read-only data (.text, .rodata) at _eronly.
|
||||
*/
|
||||
|
||||
for (src = &_eronly, dest = &_sdata; dest < &_edata; )
|
||||
{
|
||||
*dest++ = *src++;
|
||||
}
|
||||
showprogress('C');
|
||||
|
||||
/* Perform early serial initialization */
|
||||
|
||||
#ifdef CONFIG_USE_EARLYSERIALINIT
|
||||
up_earlyserialinit();
|
||||
#endif
|
||||
showprogress('D');
|
||||
|
||||
/* Initialize onboard resources */
|
||||
|
||||
lpc17_boardinitialize();
|
||||
showprogress('E');
|
||||
|
||||
/* Then start NuttX */
|
||||
|
||||
showprogress('\r');
|
||||
showprogress('\n');
|
||||
os_start();
|
||||
|
||||
/* Shouldn't get here */
|
||||
|
||||
for(;;);
|
||||
}
|
||||
349
arch/arm/src/lpc17xx/lpc17_vectors.S
Executable file
349
arch/arm/src/lpc17xx/lpc17_vectors.S
Executable file
@ -0,0 +1,349 @@
|
||||
/************************************************************************************************
|
||||
* arch/arm/src/lpc17xx/lpc17_vectors.S
|
||||
* arch/arm/src/chip/lpc17_vectors.S
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************************/
|
||||
|
||||
/************************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <arch/irq.h>
|
||||
|
||||
/************************************************************************************************
|
||||
* Preprocessor Definitions
|
||||
************************************************************************************************/
|
||||
|
||||
/* Memory Map:
|
||||
*
|
||||
* 0x0000:0000 - Beginning of FLASH. Address of vectors
|
||||
* 0x0003:ffff - End of flash
|
||||
* 0x1000:0000 - Start of CPU SRAM and start of .data (_sdata)
|
||||
* - End of .data (_edata) and start of .bss (_sbss)
|
||||
* - End of .bss (_ebss) and bottom of idle stack
|
||||
* - _ebss + CONFIG_IDLETHREAD_STACKSIZE = end of idle stack, start of heap. NOTE
|
||||
* that the ARM uses a decrement before store stack so that the correct initial
|
||||
* value is the end of the stack + 4;
|
||||
* 0x1000:7fff - End of CPU SRAM and end of heap (1st region)
|
||||
*/
|
||||
|
||||
#define IDLE_STACK (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
#define HEAP_BASE (_ebss+CONFIG_IDLETHREAD_STACKSIZE)
|
||||
|
||||
/* The Cortex-M3 return from interrupt is unusual. We provide the following special
|
||||
* address to the BX instruction. The particular value also forces a return to
|
||||
* thread mode and covers state from the main stack point, the MSP (vs. the MSP).
|
||||
*/
|
||||
|
||||
#define EXC_RETURN 0xfffffff9
|
||||
|
||||
/************************************************************************************************
|
||||
* Global Symbols
|
||||
************************************************************************************************/
|
||||
|
||||
.globl __start
|
||||
|
||||
.syntax unified
|
||||
.thumb
|
||||
.file "lpc17_vectors.S"
|
||||
|
||||
/************************************************************************************************
|
||||
* Macros
|
||||
************************************************************************************************/
|
||||
|
||||
/* On entry into an IRQ, the hardware automatically saves the xPSR, PC, LR, R12, R0-R3
|
||||
* registers on the stack, then branches to an instantantiation of the following
|
||||
* macro. This macro simply loads the IRQ number into R0, then jumps to the common
|
||||
* IRQ handling logic.
|
||||
*/
|
||||
|
||||
.macro HANDLER, label, irqno
|
||||
.thumb_func
|
||||
\label:
|
||||
mov r0, #\irqno
|
||||
b lpc17_common
|
||||
.endm
|
||||
|
||||
/************************************************************************************************
|
||||
* Vectors
|
||||
************************************************************************************************/
|
||||
|
||||
.section .vectors, "ax"
|
||||
.code 16
|
||||
.align 2
|
||||
.globl lpc17_vectors
|
||||
.type lpc17_vectors, function
|
||||
|
||||
lpc17_vectors:
|
||||
|
||||
/* Processor Exceptions */
|
||||
|
||||
.word IDLE_STACK /* Vector 0: Reset stack pointer */
|
||||
.word __start /* Vector 1: Reset vector */
|
||||
.word lpc17_nmi /* Vector 2: Non-Maskable Interrupt (NMI) */
|
||||
.word lpc17_hardfault /* Vector 3: Hard fault */
|
||||
.word lpc17_mpu /* Vector 4: Memory management (MPU) */
|
||||
.word lpc17_busfault /* Vector 5: Bus fault */
|
||||
.word lpc17_usagefault /* Vector 6: Usage fault */
|
||||
.word lpc17_reserved /* Vector 7: Reserved */
|
||||
.word lpc17_reserved /* Vector 8: Reserved */
|
||||
.word lpc17_reserved /* Vector 9: Reserved */
|
||||
.word lpc17_reserved /* Vector 10: Reserved */
|
||||
.word lpc17_svcall /* Vector 11: SVC call */
|
||||
.word lpc17_dbgmonitor /* Vector 12: Debug monitor */
|
||||
.word lpc17_reserved /* Vector 13: Reserved */
|
||||
.word lpc17_pendsv /* Vector 14: Pendable system service request */
|
||||
.word lpc17_systick /* Vector 15: System tick */
|
||||
|
||||
/* External Interrupts */
|
||||
|
||||
.word lpc17_wdt /* Vector 16+0: Watchdog timer */
|
||||
.word lpc17_tmr0 /* Vector 16+1: Timer 0 */
|
||||
.word lpc17_tmr1 /* Vector 16+2: Timer 1 */
|
||||
.word lpc17_tmr2 /* Vector 16+3: Timer 2 */
|
||||
.word lpc17_tmr3 /* Vector 16+4: Timer 3 */
|
||||
.word lpc17_uart0 /* Vector 16+5: UART 0 */
|
||||
.word lpc17_uart1 /* Vector 16+6: UART 1 */
|
||||
.word lpc17_uart2 /* Vector 16+7: UART 2 */
|
||||
.word lpc17_uart3 /* Vector 16+8: UART 3 */
|
||||
.word lpc17_pwm1 /* Vector 16+9: PWM */
|
||||
.word lpc17_i2c0 /* Vector 16+10: I2C 0 */
|
||||
.word lpc17_i2c1 /* Vector 16+11: I2C 1 */
|
||||
.word lpc17_i2c2 /* Vector 16+12: I2C 2 */
|
||||
.word lpc17_spif /* Vector 16+13: SPI */
|
||||
.word lpc17_ssp0 /* Vector 16+14: SSP 0 */
|
||||
.word lpc17_ssp1 /* Vector 16+15: SSP 1 */
|
||||
.word lpc17_pll0 /* Vector 16+16: PLL 0 */
|
||||
.word lpc17_rtc /* Vector 16+17: Real time clock */
|
||||
.word lpc17_eint0 /* Vector 16+18: External interrupt 0 */
|
||||
.word lpc17_eint1 /* Vector 16+19: External interrupt 1 */
|
||||
.word lpc17_eint2 /* Vector 16+20: External interrupt 2 */
|
||||
.word lpc17_eint3 /* Vector 16+21: External interrupt 3 */
|
||||
.word lpc17_adc /* Vector 16+22: A/D Converter */
|
||||
.word lpc17_bod /* Vector 16+23: Brown Out detect */
|
||||
.word lpc17_usb /* Vector 16+24: USB */
|
||||
.word lpc17_can /* Vector 16+25: CAN */
|
||||
.word lpc17_gpdma /* Vector 16+26: GPDMA */
|
||||
.word lpc17_i2s /* Vector 16+27: I2S */
|
||||
.word lpc17_eth /* Vector 16+28: Ethernet */
|
||||
.word lpc17_ritint /* Vector 16+29: Repetitive Interrupt Timer */
|
||||
.word lpc17_mcpwm /* Vector 16+30: Motor Control PWM */
|
||||
.word lpc17_qei /* Vector 16+31: Quadrature Encoder */
|
||||
.word lpc17_pll1 /* Vector 16+32: PLL 1 */
|
||||
.word lpc17_usbact /* Vector 16+33: USB Activity Interrupt */
|
||||
.word lpc17_canact /* Vector 16+34: CAN Activity Interrupt */
|
||||
.size lpc17_vectors, .-lpc17_vectors
|
||||
|
||||
/************************************************************************************************
|
||||
* .text
|
||||
************************************************************************************************/
|
||||
|
||||
.text
|
||||
.type handlers, function
|
||||
.thumb_func
|
||||
handlers:
|
||||
HANDLER lpc17_reserved, LPC17_IRQ_RESERVED /* Unexpected/reserved vector */
|
||||
HANDLER lpc17_nmi, LPC17_IRQ_NMI /* Vector 2: Non-Maskable Interrupt (NMI) */
|
||||
HANDLER lpc17_hardfault, LPC17_IRQ_HARDFAULT /* Vector 3: Hard fault */
|
||||
HANDLER lpc17_mpu, LPC17_IRQ_MPU /* Vector 4: Memory management (MPU) */
|
||||
HANDLER lpc17_busfault, LPC17_IRQ_BUSFAULT /* Vector 5: Bus fault */
|
||||
HANDLER lpc17_usagefault, LPC17_IRQ_USAGEFAULT /* Vector 6: Usage fault */
|
||||
HANDLER lpc17_svcall, LPC17_IRQ_SVCALL /* Vector 11: SVC call */
|
||||
HANDLER lpc17_dbgmonitor, LPC17_IRQ_DBGMONITOR /* Vector 12: Debug Monitor */
|
||||
HANDLER lpc17_pendsv, LPC17_IRQ_PENDSV /* Vector 14: Penable system service request */
|
||||
HANDLER lpc17_systick, LPC17_IRQ_SYSTICK /* Vector 15: System tick */
|
||||
|
||||
HANDLER lpc17_wdt, LPC17_IRQ_WDT /* Vector 16+0: Watchdog timer */
|
||||
HANDLER lpc17_tmr0, LPC17_IRQ_TMR0 /* Vector 16+1: Timer 0 */
|
||||
HANDLER lpc17_tmr1, LPC17_IRQ_TMR1 /* Vector 16+2: Timer 1 */
|
||||
HANDLER lpc17_tmr2, LPC17_IRQ_TMR2 /* Vector 16+3: Timer 2 */
|
||||
HANDLER lpc17_tmr3, LPC17_IRQ_TMR3 /* Vector 16+4: Timer 3 */
|
||||
HANDLER lpc17_uart0, LPC17_IRQ_UART0 /* Vector 16+5: UART 0 */
|
||||
HANDLER lpc17_uart1, LPC17_IRQ_UART1 /* Vector 16+6: UART 1 */
|
||||
HANDLER lpc17_uart2, LPC17_IRQ_UART2 /* Vector 16+7: UART 2 */
|
||||
HANDLER lpc17_uart3, LPC17_IRQ_UART3 /* Vector 16+8: UART 3 */
|
||||
HANDLER lpc17_pwm1, LPC17_IRQ_PWM1 /* Vector 16+9: PWM 1 */
|
||||
HANDLER lpc17_i2c0, LPC17_IRQ_I2C0 /* Vector 16+10: I2C 0 */
|
||||
HANDLER lpc17_i2c1, LPC17_IRQ_I2C1 /* Vector 16+11: I2C 1 */
|
||||
HANDLER lpc17_i2c2, LPC17_IRQ_I2C2 /* Vector 16+12: I2C 2 */
|
||||
HANDLER lpc17_spif, LPC17_IRQ_SPIF /* Vector 16+13: SPI */
|
||||
HANDLER lpc17_ssp0, LPC17_IRQ_SSP0 /* Vector 16+14: SSP 0 */
|
||||
HANDLER lpc17_ssp1, LPC17_IRQ_SSP1 /* Vector 16+15: SSP 1 */
|
||||
HANDLER lpc17_pll0, LPC17_IRQ_PLL0 /* Vector 16+16: PLL 0 */
|
||||
HANDLER lpc17_rtc, LPC17_IRQ_RTC /* Vector 16+17: Real time clock */
|
||||
HANDLER lpc17_eint0, LPC17_IRQ_EINT0 /* Vector 16+18: External interrupt 0 */
|
||||
HANDLER lpc17_eint1, LPC17_IRQ_EINT1 /* Vector 16+19: External interrupt 1 */
|
||||
HANDLER lpc17_eint2, LPC17_IRQ_EINT2 /* Vector 16+20: External interrupt 2 */
|
||||
HANDLER lpc17_eint3, LPC17_IRQ_EINT3 /* Vector 16+21: External interrupt 3 */
|
||||
HANDLER lpc17_adc, LPC17_IRQ_ADC /* Vector 16+22: A/D Converter */
|
||||
HANDLER lpc17_bod, LPC17_IRQ_BOD /* Vector 16+23: Brown Out detect */
|
||||
HANDLER lpc17_usb, LPC17_IRQ_USB /* Vector 16+24: USB */
|
||||
HANDLER lpc17_can, LPC17_IRQ_CAN /* Vector 16+25: CAN */
|
||||
HANDLER lpc17_gpdma, LPC17_IRQ_GPDMA /* Vector 16+26: GPDMA */
|
||||
HANDLER lpc17_i2s, LPC17_IRQ_I2S /* Vector 16+27: I2S */
|
||||
HANDLER lpc17_eth, LPC17_IRQ_ETH /* Vector 16+28: Ethernet */
|
||||
HANDLER lpc17_ritint, LPC17_IRQ_RITINT /* Vector 16+29: Repetitive Interrupt Timer */
|
||||
HANDLER lpc17_mcpwm, LPC17_IRQ_MCPWM /* Vector 16+30: Motor Control PWM */
|
||||
HANDLER lpc17_qei, LPC17_IRQ_QEI /* Vector 16+31: Quadrature Encoder */
|
||||
HANDLER lpc17_pll1, LPC17_IRQ_PLL1 /* Vector 16+32: PLL 1 */
|
||||
HANDLER lpc17_usbact, LPC17_IRQ_USBACT /* Vector 16+33: USB Activity Interrupt */
|
||||
HANDLER lpc17_canact, LPC17_IRQ_CANACT /* Vector 16+34: CAN Activity Interrupt */
|
||||
|
||||
/* Common IRQ handling logic. On entry here, the stack is like the following:
|
||||
*
|
||||
* REG_XPSR
|
||||
* REG_R15
|
||||
* REG_R14
|
||||
* REG_R12
|
||||
* REG_R3
|
||||
* REG_R2
|
||||
* REG_R1
|
||||
* MSP->REG_R0
|
||||
*
|
||||
* and R0 contains the IRQ number
|
||||
*/
|
||||
|
||||
lpc17_common:
|
||||
|
||||
/* Complete the context save */
|
||||
|
||||
mrs r1, msp /* R1=The main stack pointer */
|
||||
mov r2, r1 /* R2=Copy of the main stack pointer */
|
||||
add r2, #HW_XCPT_SIZE /* R2=MSP before the interrupt was taken */
|
||||
mrs r3, primask /* R3=Current PRIMASK setting */
|
||||
stmdb r1!, {r2-r11} /* Save the remaining registers plus the SP value */
|
||||
|
||||
/* Disable interrupts, select the stack to use for interrupt handling
|
||||
* and call up_doirq to handle the interrupt
|
||||
*/
|
||||
|
||||
cpsid i /* Disable further interrupts */
|
||||
|
||||
/* If CONFIG_ARCH_INTERRUPTSTACK is defined, we will use a special interrupt
|
||||
* stack pointer. The way that this is done here prohibits nested interrupts!
|
||||
* Otherwise, we will re-use the main stack for interrupt level processing.
|
||||
*/
|
||||
|
||||
#ifdef CONFIG_ARCH_INTERRUPTSTACK
|
||||
ld sp, #up_interruptstack_base
|
||||
str r1, [sp, #-4]! /* Save the MSP on the interrupt stack */
|
||||
bl up_doirq /* R0=IRQ, R1=register save (msp) */
|
||||
ldr r1, [sp, #+4]! /* Recover R1=main stack pointer */
|
||||
#else
|
||||
mov sp, r1 /* We are using the main stack pointer */
|
||||
bl up_doirq /* R0=IRQ, R1=register save (msp) */
|
||||
mov r1, sp /* Recover R1=main stack pointer */
|
||||
#endif
|
||||
|
||||
/* On return from up_doirq, R0 will hold a pointer to register context
|
||||
* array to use for the interrupt return. If that return value is the same
|
||||
* as current stack pointer, then things are relatively easy.
|
||||
*/
|
||||
|
||||
cmp r0, r1 /* Context switch? */
|
||||
beq 1f /* Branch if no context switch */
|
||||
|
||||
/* We are returning with a pending context switch. This case is different
|
||||
* because in this case, the register save structure does not lie on the
|
||||
* stack but, rather, are within a TCB structure. We'll have to copy some
|
||||
* values to the stack.
|
||||
*/
|
||||
|
||||
add r1, r0, #SW_XCPT_SIZE /* R1=Address of HW save area in reg array */
|
||||
ldmia r1, {r4-r11} /* Fetch eight registers in HW save area */
|
||||
ldr r1, [r0, #(4*REG_SP)] /* R1=Value of SP before interrupt */
|
||||
stmdb r1!, {r4-r11} /* Store eight registers in HW save area */
|
||||
ldmia r0, {r2-r11} /* Recover R4-R11 + 2 temp values */
|
||||
b 2f /* Re-join common logic */
|
||||
|
||||
/* We are returning with no context switch. We simply need to "unwind"
|
||||
* the same stack frame that we created
|
||||
*/
|
||||
1:
|
||||
ldmia r1!, {r2-r11} /* Recover R4-R11 + 2 temp values */
|
||||
2:
|
||||
msr msp, r1 /* Recover the return MSP value */
|
||||
|
||||
/* Do we need to restore interrupts? */
|
||||
|
||||
tst r3, #1 /* PRIMASK bit 1=1 means that interrupts are masked */
|
||||
bne 3f
|
||||
cpsie i /* Restore interrupts */
|
||||
|
||||
/* Always return with R14 containing the special value that will: (1)
|
||||
* return to thread mode, and (2) continue to use the MSP
|
||||
*/
|
||||
3:
|
||||
ldr r14, =EXC_RETURN /* Load the special value */
|
||||
bx r14 /* And return */
|
||||
.size handlers, .-handlers
|
||||
|
||||
/************************************************************************************************
|
||||
* Name: up_interruptstack/g_userstack
|
||||
*
|
||||
* Description:
|
||||
* Shouldn't happen
|
||||
*
|
||||
************************************************************************************************/
|
||||
|
||||
#if CONFIG_ARCH_INTERRUPTSTACK > 3
|
||||
.bss
|
||||
.align 4
|
||||
up_interruptstack:
|
||||
.skip (CONFIG_ARCH_INTERRUPTSTACK & ~3)
|
||||
up_interruptstack_base:
|
||||
.size up_interruptstack, .-up_interruptstack
|
||||
#endif
|
||||
|
||||
/************************************************************************************************
|
||||
* .rodata
|
||||
************************************************************************************************/
|
||||
|
||||
.section .rodata, "a"
|
||||
|
||||
/* Variables: _sbss is the start of the BSS region (see ld.script) _ebss is the end
|
||||
* of the BSS regsion (see ld.script). The idle task stack starts at the end of BSS
|
||||
* and is of size CONFIG_IDLETHREAD_STACKSIZE. The IDLE thread is the thread that
|
||||
* the system boots on and, eventually, becomes the idle, do nothing task that runs
|
||||
* only when there is nothing else to run. The heap continues from there until the
|
||||
* end of memory. See g_heapbase below.
|
||||
*/
|
||||
|
||||
.globl g_heapbase
|
||||
.type g_heapbase, object
|
||||
g_heapbase:
|
||||
.word HEAP_BASE
|
||||
.size g_heapbase, .-g_heapbase
|
||||
|
||||
.end
|
||||
@ -671,6 +671,11 @@ configs/ntosd-dm320
|
||||
STATUS: This port is code complete, verified, and included in the
|
||||
NuttX 0.2.1 release.
|
||||
|
||||
configs/nucleus2g
|
||||
This port uses the Nucleus 2G board (with Babel CAN board). This board
|
||||
features an NXP LPC1768 processor. See the 2G website (http://www.2g-eng.com/)
|
||||
for more information about the Nucleus 2G.
|
||||
|
||||
configs/olimex-lpc2378
|
||||
This port uses the Olimex Olimex-lpc2378 board arm-elf toolchain* under
|
||||
Linux or Cygwin. STATUS: ostest and NSH configurations available.
|
||||
|
||||
99
configs/nucleus2g/include/board.h
Executable file
99
configs/nucleus2g/include/board.h
Executable file
@ -0,0 +1,99 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleus2g/include/board.h
|
||||
* include/arch/board/board.h
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_BOARD_BOARD_H
|
||||
#define __ARCH_BOARD_BOARD_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* Clocking *************************************************************************/
|
||||
|
||||
/* LED definitions ******************************************************************/
|
||||
|
||||
#define LED_STARTED 0
|
||||
#define LED_HEAPALLOCATE 1
|
||||
#define LED_IRQSENABLED 2
|
||||
#define LED_STACKCREATED 3
|
||||
|
||||
#define LED_INIRQ 4
|
||||
#define LED_SIGNAL 5
|
||||
#define LED_ASSERTION 6
|
||||
#define LED_PANIC 7
|
||||
|
||||
/************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
#define EXTERN extern "C"
|
||||
extern "C" {
|
||||
#else
|
||||
#define EXTERN extern
|
||||
#endif
|
||||
|
||||
/************************************************************************************
|
||||
* Public Function Prototypes
|
||||
************************************************************************************/
|
||||
/************************************************************************************
|
||||
* Name: lpc17_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All LPC17xx architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
EXTERN void lpc17_boardinitialize(void);
|
||||
|
||||
#undef EXTERN
|
||||
#if defined(__cplusplus)
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* __ARCH_BOARD_BOARD_H */
|
||||
168
configs/nucleus2g/ostest/Make.defs
Executable file
168
configs/nucleus2g/ostest/Make.defs
Executable file
@ -0,0 +1,168 @@
|
||||
############################################################################
|
||||
# configs/nucleus2g/ostest/Make.defs
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
include ${TOPDIR}/.config
|
||||
|
||||
# Setup for the selected toolchain
|
||||
|
||||
ifeq ($(CONFIG_LPC17_CODESOURCERYW),y)
|
||||
# CodeSourcery under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_CODESOURCERYL),y)
|
||||
# CodeSourcery under Linux
|
||||
CROSSDEV = arm-none-eabi-
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -O2
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_DEVKITARM),y)
|
||||
# devkitARM under Windows
|
||||
CROSSDEV = arm-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_RAISONANCE),y)
|
||||
# Raisonance RIDE7 under Windows
|
||||
CROSSDEV = arm-none-eabi-
|
||||
WINTOOL = y
|
||||
ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
|
||||
endif
|
||||
ifeq ($(CONFIG_LPC17_BUILDROOT),y)
|
||||
# NuttX buildroot under Linux or Cygwin
|
||||
CROSSDEV = arm-elf-
|
||||
ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
|
||||
MAXOPTIMIZATION = -Os
|
||||
endif
|
||||
|
||||
ifeq ($(WINTOOL),y)
|
||||
# Windows-native toolchains
|
||||
DIRLINK = $(TOPDIR)/tools/winlink.sh
|
||||
DIRUNLINK = $(TOPDIR)/tools/unlink.sh
|
||||
MKDEP = $(TOPDIR)/tools/mknulldeps.sh
|
||||
ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
|
||||
ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
|
||||
ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
|
||||
MAXOPTIMIZATION = -O2
|
||||
else
|
||||
# Linux/Cygwin-native toolchain
|
||||
MKDEP = $(TOPDIR)/tools/mkdeps.sh
|
||||
ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
|
||||
ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
|
||||
ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
|
||||
endif
|
||||
|
||||
CC = $(CROSSDEV)gcc
|
||||
CXX = $(CROSSDEV)g++
|
||||
CPP = $(CROSSDEV)gcc -E
|
||||
LD = $(CROSSDEV)ld
|
||||
AR = $(CROSSDEV)ar rcs
|
||||
NM = $(CROSSDEV)nm
|
||||
OBJCOPY = $(CROSSDEV)objcopy
|
||||
OBJDUMP = $(CROSSDEV)objdump
|
||||
|
||||
ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
|
||||
ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
|
||||
|
||||
ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
|
||||
ARCHOPTIMIZATION = -g
|
||||
else
|
||||
ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
|
||||
endif
|
||||
|
||||
ARCHCFLAGS = -fno-builtin
|
||||
ARCHCXXFLAGS = -fno-builtin -fno-exceptions
|
||||
ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
|
||||
ARCHWARNINGSXX = -Wall -Wshadow
|
||||
ARCHDEFINES =
|
||||
ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
|
||||
|
||||
CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) -pipe
|
||||
CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
|
||||
CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) -pipe
|
||||
CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
|
||||
CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES)
|
||||
AFLAGS = $(CFLAGS) -D__ASSEMBLY__
|
||||
|
||||
NXFLATLDFLAGS1 = -r -d -warn-common
|
||||
NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
|
||||
LDNXFLATFLAGS = -e main -s 2048
|
||||
|
||||
OBJEXT = .o
|
||||
LIBEXT = .a
|
||||
EXEEXT =
|
||||
|
||||
ifneq ($(CROSSDEV),arm-elf-)
|
||||
LDFLAGS += -nostartfiles -nodefaultlibs
|
||||
endif
|
||||
ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
|
||||
LDFLAGS += -g
|
||||
endif
|
||||
|
||||
define PREPROCESS
|
||||
@echo "CPP: $1->$2"
|
||||
@$(CPP) $(CPPFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILE
|
||||
@echo "CC: $1"
|
||||
@$(CC) -c $(CFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define COMPILEXX
|
||||
@echo "CXX: $1"
|
||||
@$(CXX) -c $(CXXFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ASSEMBLE
|
||||
@echo "AS: $1"
|
||||
@$(CC) -c $(AFLAGS) $1 -o $2
|
||||
endef
|
||||
|
||||
define ARCHIVE
|
||||
echo "AR: $2"; \
|
||||
$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
|
||||
endef
|
||||
|
||||
define CLEAN
|
||||
@rm -f *.o *.a
|
||||
endef
|
||||
|
||||
HOSTCC = gcc
|
||||
HOSTINCLUDES = -I.
|
||||
HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
|
||||
HOSTLDFLAGS =
|
||||
|
||||
778
configs/nucleus2g/ostest/defconfig
Executable file
778
configs/nucleus2g/ostest/defconfig
Executable file
@ -0,0 +1,778 @@
|
||||
############################################################################
|
||||
# configs/nucleus2g/ostest/defconfig
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
#
|
||||
# architecture selection
|
||||
#
|
||||
# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
|
||||
# processor architecture.
|
||||
# CONFIG_ARCH_family - for use in C code. This identifies the
|
||||
# particular chip family that the architecture is implemented
|
||||
# in.
|
||||
# CONFIG_ARCH_architecture - for use in C code. This identifies the
|
||||
# specific architecture within the chip familyl.
|
||||
# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
|
||||
# CONFIG_ARCH_CHIP_name - For use in C code
|
||||
# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
|
||||
# the board that supports the particular chip or SoC.
|
||||
# CONFIG_ARCH_BOARD_name - for use in C code
|
||||
# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
|
||||
# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
|
||||
# CONFIG_DRAM_SIZE - Describes the installed DRAM.
|
||||
# CONFIG_DRAM_START - The start address of DRAM (physical)
|
||||
# CONFIG_DRAM_END - Last address+1 of installed RAM
|
||||
# CONFIG_ARCH_IRQPRIO - The ST32F103Z supports interrupt prioritization
|
||||
# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
|
||||
# stack. If defined, this symbol is the size of the interrupt
|
||||
# stack in bytes. If not defined, the user task stacks will be
|
||||
# used during interrupt handling.
|
||||
# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
|
||||
# CONFIG_ARCH_BOOTLOADER - Set if you are using a bootloader.
|
||||
# CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to board architecture.
|
||||
# CONFIG_ARCH_BUTTONS - Enable support for buttons. Unique to board architecture.
|
||||
# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
|
||||
# cause a 100 second delay during boot-up. This 100 second delay
|
||||
# serves no purpose other than it allows you to calibrate
|
||||
# CONFIG_BOARD_LOOPSPERMSEC. You simply use a stop watch to measure
|
||||
# the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
|
||||
# the delay actually is 100 seconds.
|
||||
# CONFIG_ARCH_DMA - Support DMA initialization
|
||||
#
|
||||
CONFIG_ARCH=arm
|
||||
CONFIG_ARCH_ARM=y
|
||||
CONFIG_ARCH_CORTEXM3=y
|
||||
CONFIG_ARCH_CHIP=lpc17xx
|
||||
CONFIG_ARCH_CHIP_LPC1768=y
|
||||
CONFIG_ARCH_BOARD=nucleus2g
|
||||
CONFIG_ARCH_BOARD_NUCLEUS2G=y
|
||||
CONFIG_BOARD_LOOPSPERMSEC=5483
|
||||
CONFIG_DRAM_SIZE=0x00008000
|
||||
CONFIG_DRAM_START=0x10000000
|
||||
CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
|
||||
CONFIG_ARCH_IRQPRIO=y
|
||||
CONFIG_ARCH_INTERRUPTSTACK=n
|
||||
CONFIG_ARCH_STACKDUMP=y
|
||||
CONFIG_ARCH_BOOTLOADER=n
|
||||
CONFIG_ARCH_LEDS=y
|
||||
CONFIG_ARCH_BUTTONS=n
|
||||
CONFIG_ARCH_CALIBRATION=n
|
||||
CONFIG_ARCH_DMA=n
|
||||
|
||||
#
|
||||
# Identify toolchain and linker options
|
||||
#
|
||||
CONFIG_LPC17_CODESOURCERYW=n
|
||||
CONFIG_LPC17_CODESOURCERYL=n
|
||||
CONFIG_LPC17_DEVKITARM=n
|
||||
CONFIG_LPC17_RAISONANCE=n
|
||||
CONFIG_LPC17_BUILDROOT=y
|
||||
CONFIG_LPC17_DFU=y
|
||||
|
||||
#
|
||||
# Individual subsystems can be enabled:
|
||||
#
|
||||
# Individual subsystems can be enabled:
|
||||
CONFIG_LP17_ETHERNET=n
|
||||
CONFIG_LP17_USBHOST=n
|
||||
CONFIG_LP17_USBOTG=n
|
||||
CONFIG_LP17_USBDEV=n
|
||||
CONFIG_LP17_CAN1=n
|
||||
CONFIG_LP17_CAN2=n
|
||||
CONFIG_LP17_SPI=n
|
||||
CONFIG_LP17_SSP0=n
|
||||
CONFIG_LP17_SSP1=n
|
||||
CONFIG_LP17_I2C0=n
|
||||
CONFIG_LP17_I2C1=n
|
||||
CONFIG_LP17_I2S=n
|
||||
CONFIG_LP17_TMR0=n
|
||||
CONFIG_LP17_TMR1=n
|
||||
CONFIG_LP17_TMR2=n
|
||||
CONFIG_LP17_TMR3=n
|
||||
CONFIG_LP17_RIT=n
|
||||
CONFIG_LP17_PWM=n
|
||||
CONFIG_LP17_MCPWM=n
|
||||
CONFIG_LP17_QEI=n
|
||||
CONFIG_LP17_RTC=n
|
||||
CONFIG_LP17_WDT=n
|
||||
CONFIG_LP17_ADC=n
|
||||
CONFIG_LP17_DAC=n
|
||||
CONFIG_LP17_GPDMA=n
|
||||
|
||||
#
|
||||
# LPC17xx specific serial device driver settings
|
||||
#
|
||||
# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
|
||||
# console and ttys0 (default is the UART1).
|
||||
# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
|
||||
# This specific the size of the receive buffer
|
||||
# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
|
||||
# being sent. This specific the size of the transmit buffer
|
||||
# CONFIG_UARTn_BAUD - The configure BAUD of the UART. Must be
|
||||
# CONFIG_UARTn_BITS - The number of bits. Must be either 7 or 8.
|
||||
# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
|
||||
# CONFIG_UARTn_2STOP - Two stop bits
|
||||
#
|
||||
CONFIG_UART1_SERIAL_CONSOLE=y
|
||||
CONFIG_UART2_SERIAL_CONSOLE=n
|
||||
CONFIG_UART3_SERIAL_CONSOLE=n
|
||||
CONFIG_UART4_SERIAL_CONSOLE=n
|
||||
|
||||
CONFIG_UART1_TXBUFSIZE=256
|
||||
CONFIG_UART2_TXBUFSIZE=256
|
||||
CONFIG_UART3_TXBUFSIZE=256
|
||||
CONFIG_UART4_TXBUFSIZE=256
|
||||
|
||||
CONFIG_UART1_RXBUFSIZE=256
|
||||
CONFIG_UART2_RXBUFSIZE=256
|
||||
CONFIG_UART3_RXBUFSIZE=256
|
||||
CONFIG_UART4_RXBUFSIZE=256
|
||||
|
||||
CONFIG_UART1_BAUD=115200
|
||||
CONFIG_UART2_BAUD=115200
|
||||
CONFIG_UART3_BAUD=115200
|
||||
CONFIG_UART4_BAUD=115200
|
||||
|
||||
CONFIG_UART1_BITS=8
|
||||
CONFIG_UART2_BITS=8
|
||||
CONFIG_UART3_BITS=8
|
||||
CONFIG_UART4_BITS=8
|
||||
|
||||
CONFIG_UART1_PARITY=0
|
||||
CONFIG_UART2_PARITY=0
|
||||
CONFIG_UART3_PARITY=0
|
||||
CONFIG_UART4_PARITY=0
|
||||
|
||||
CONFIG_UART1_2STOP=0
|
||||
CONFIG_UART2_2STOP=0
|
||||
CONFIG_UART3_2STOP=0
|
||||
CONFIG_UART4_2STOP=0
|
||||
|
||||
#
|
||||
# General build options
|
||||
#
|
||||
# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
|
||||
# BSPs from www.ridgerun.com using the tools/mkimage.sh script
|
||||
# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
|
||||
# used with many different loaders using the GNU objcopy program
|
||||
# Should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_RAW_BINARY - make a raw binary format file used with many
|
||||
# different loaders using the GNU objcopy program. This option
|
||||
# should not be selected if you are not using the GNU toolchain.
|
||||
# CONFIG_HAVE_LIBM - toolchain supports libm.a
|
||||
#
|
||||
CONFIG_RRLOAD_BINARY=n
|
||||
CONFIG_INTELHEX_BINARY=y
|
||||
CONFIG_MOTOROLA_SREC=n
|
||||
CONFIG_RAW_BINARY=n
|
||||
CONFIG_HAVE_LIBM=n
|
||||
|
||||
#
|
||||
# General OS setup
|
||||
#
|
||||
# CONFIG_EXAMPLE - identifies the subdirectory in examples
|
||||
# that will be used in the build
|
||||
# CONFIG_DEBUG - enables built-in debug options
|
||||
# CONFIG_DEBUG_VERBOSE - enables verbose debug output
|
||||
# CONFIG_DEBUG_SYMBOLS - build without optimization and with
|
||||
# debug symbols (needed for use with a debugger).
|
||||
# CONFIG_MM_REGIONS - If the architecture includes multiple
|
||||
# regions of memory to allocate from, this specifies the
|
||||
# number of memory regions that the memory manager must
|
||||
# handle and enables the API mm_addregion(start, end);
|
||||
# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
|
||||
# time console output
|
||||
# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
|
||||
# or TICKS_PER_MSEC=10. This setting may be defined to
|
||||
# inform NuttX that the processor hardware is providing
|
||||
# system timer interrupts at some interrupt interval other
|
||||
# than 10 msec.
|
||||
# CONFIG_RR_INTERVAL - The round robin timeslice will be set
|
||||
# this number of milliseconds; Round robin scheduling can
|
||||
# be disabled by setting this value to zero.
|
||||
# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in
|
||||
# scheduler to monitor system performance
|
||||
# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
|
||||
# task name to save in the TCB. Useful if scheduler
|
||||
# instrumentation is selected. Set to zero to disable.
|
||||
# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
|
||||
# Used to initialize the internal time logic.
|
||||
# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
|
||||
# You would only need this if you are concerned about accurate
|
||||
# time conversions in the past or in the distant future.
|
||||
# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
|
||||
# would only need this if you are concerned about accurate
|
||||
# time conversion in the distand past. You must also define
|
||||
# CONFIG_GREGORIAN_TIME in order to use Julian time.
|
||||
# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
|
||||
# provides /dev/console. Enables stdout, stderr, stdin.
|
||||
# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
|
||||
# driver (minimul support)
|
||||
# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
|
||||
# errorcheck mutexes. Enables pthread_mutexattr_settype().
|
||||
# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
|
||||
# inheritance on mutexes and semaphores.
|
||||
# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
|
||||
# inheritance is enabled. It defines the maximum number of
|
||||
# different threads (minus one) that can take counts on a
|
||||
# semaphore with priority inheritance support. This may be
|
||||
# set to zero if priority inheritance is disabled OR if you
|
||||
# are only using semaphores as mutexes (only one holder) OR
|
||||
# if no more than two threads participate using a counting
|
||||
# semaphore.
|
||||
# CONFIG_SEM_NNESTPRIO. If priority inheritance is enabled,
|
||||
# then this setting is the maximum number of higher priority
|
||||
# threads (minus 1) than can be waiting for another thread
|
||||
# to release a count on a semaphore. This value may be set
|
||||
# to zero if no more than one thread is expected to wait for
|
||||
# a semaphore.
|
||||
# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
|
||||
# by task_create() when a new task is started. If set, all
|
||||
# files/drivers will appear to be closed in the new task.
|
||||
# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
|
||||
# three file descriptors (stdin, stdout, stderr) by task_create()
|
||||
# when a new task is started. If set, all files/drivers will
|
||||
# appear to be closed in the new task except for stdin, stdout,
|
||||
# and stderr.
|
||||
# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
|
||||
# desciptors by task_create() when a new task is started. If
|
||||
# set, all sockets will appear to be closed in the new task.
|
||||
# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
|
||||
# This format will support execution of NuttX binaries located
|
||||
# in a ROMFS filesystem (see examples/nxflat).
|
||||
# CONFIG_SCHED_WORKQUEUE. Create a dedicated "worker" thread to
|
||||
# handle delayed processing from interrupt handlers. This feature
|
||||
# is required for some drivers but, if there are not complaints,
|
||||
# can be safely disabled. The worker thread also performs
|
||||
# garbage collection -- completing any delayed memory deallocations
|
||||
# from interrupt handlers. If the worker thread is disabled,
|
||||
# then that clean will be performed by the IDLE thread instead
|
||||
# (which runs at the lowest of priority and may not be appropriate
|
||||
# if memory reclamation is of high priority). If CONFIG_SCHED_WORKQUEUE
|
||||
# is enabled, then the following options can also be used:
|
||||
# CONFIG_SCHED_WORKPRIORITY - The execution priority of the worker
|
||||
# thread. Default: 50
|
||||
# CONFIG_SCHED_WORKPERIOD - How often the worker thread checks for
|
||||
# work in units of microseconds. Default: 50*1000 (50 MS).
|
||||
# CONFIG_SCHED_WORKSTACKSIZE - The stack size allocated for the worker
|
||||
# thread. Default: CONFIG_IDLETHREAD_STACKSIZE.
|
||||
# CONFIG_SIG_SIGWORK - The signal number that will be used to wake-up
|
||||
# the worker thread. Default: 4
|
||||
#
|
||||
CONFIG_EXAMPLE=ostest
|
||||
CONFIG_DEBUG=n
|
||||
CONFIG_DEBUG_VERBOSE=n
|
||||
CONFIG_DEBUG_SYMBOLS=n
|
||||
CONFIG_MM_REGIONS=1
|
||||
CONFIG_ARCH_LOWPUTC=y
|
||||
CONFIG_RR_INTERVAL=200
|
||||
CONFIG_SCHED_INSTRUMENTATION=n
|
||||
CONFIG_TASK_NAME_SIZE=0
|
||||
CONFIG_START_YEAR=2009
|
||||
CONFIG_START_MONTH=9
|
||||
CONFIG_START_DAY=21
|
||||
CONFIG_GREGORIAN_TIME=n
|
||||
CONFIG_JULIAN_TIME=n
|
||||
CONFIG_DEV_CONSOLE=y
|
||||
CONFIG_DEV_LOWCONSOLE=y
|
||||
CONFIG_MUTEX_TYPES=n
|
||||
CONFIG_PRIORITY_INHERITANCE=n
|
||||
CONFIG_SEM_PREALLOCHOLDERS=0
|
||||
CONFIG_SEM_NNESTPRIO=0
|
||||
CONFIG_FDCLONE_DISABLE=n
|
||||
CONFIG_FDCLONE_STDIO=n
|
||||
CONFIG_SDCLONE_DISABLE=y
|
||||
CONFIG_NXFLAT=n
|
||||
CONFIG_SCHED_WORKQUEUE=n
|
||||
CONFIG_SCHED_WORKPRIORITY=50
|
||||
CONFIG_SCHED_WORKPERIOD=(50*1000)
|
||||
CONFIG_SCHED_WORKSTACKSIZE=1024
|
||||
CONFIG_SIG_SIGWORK=4
|
||||
|
||||
#
|
||||
# The following can be used to disable categories of
|
||||
# APIs supported by the OS. If the compiler supports
|
||||
# weak functions, then it should not be necessary to
|
||||
# disable functions unless you want to restrict usage
|
||||
# of those APIs.
|
||||
#
|
||||
# There are certain dependency relationships in these
|
||||
# features.
|
||||
#
|
||||
# o mq_notify logic depends on signals to awaken tasks
|
||||
# waiting for queues to become full or empty.
|
||||
# o pthread_condtimedwait() depends on signals to wake
|
||||
# up waiting tasks.
|
||||
#
|
||||
CONFIG_DISABLE_CLOCK=n
|
||||
CONFIG_DISABLE_POSIX_TIMERS=n
|
||||
CONFIG_DISABLE_PTHREAD=n
|
||||
CONFIG_DISABLE_SIGNALS=n
|
||||
CONFIG_DISABLE_MQUEUE=n
|
||||
CONFIG_DISABLE_MOUNTPOINT=y
|
||||
CONFIG_DISABLE_ENVIRON=y
|
||||
CONFIG_DISABLE_POLL=y
|
||||
|
||||
#
|
||||
# Misc libc settings
|
||||
#
|
||||
# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
|
||||
# little smaller if we do not support fieldwidthes
|
||||
#
|
||||
CONFIG_NOPRINTF_FIELDWIDTH=n
|
||||
|
||||
#
|
||||
# Allow for architecture optimized implementations
|
||||
#
|
||||
# The architecture can provide optimized versions of the
|
||||
# following to improve system performance
|
||||
#
|
||||
CONFIG_ARCH_MEMCPY=n
|
||||
CONFIG_ARCH_MEMCMP=n
|
||||
CONFIG_ARCH_MEMMOVE=n
|
||||
CONFIG_ARCH_MEMSET=n
|
||||
CONFIG_ARCH_STRCMP=n
|
||||
CONFIG_ARCH_STRCPY=n
|
||||
CONFIG_ARCH_STRNCPY=n
|
||||
CONFIG_ARCH_STRLEN=n
|
||||
CONFIG_ARCH_BZERO=n
|
||||
CONFIG_ARCH_KMALLOC=n
|
||||
CONFIG_ARCH_KZMALLOC=n
|
||||
CONFIG_ARCH_KFREE=n
|
||||
|
||||
#
|
||||
# Sizes of configurable things (0 disables)
|
||||
#
|
||||
# CONFIG_MAX_TASKS - The maximum number of simultaneously
|
||||
# active tasks. This value must be a power of two.
|
||||
# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
|
||||
# of parameters that a task may receive (i.e., maxmum value
|
||||
# of 'argc')
|
||||
# CONFIG_NPTHREAD_KEYS - The number of items of thread-
|
||||
# specific data that can be retained
|
||||
# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
|
||||
# descriptors (one for each open)
|
||||
# CONFIG_NFILE_STREAMS - The maximum number of streams that
|
||||
# can be fopen'ed
|
||||
# CONFIG_NAME_MAX - The maximum size of a file name.
|
||||
# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
|
||||
# on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
|
||||
# CONFIG_NUNGET_CHARS - Number of characters that can be
|
||||
# buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
|
||||
# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
|
||||
# structures. The system manages a pool of preallocated
|
||||
# message structures to minimize dynamic allocations
|
||||
# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
|
||||
# a fixed payload size given by this settin (does not include
|
||||
# other message structure overhead.
|
||||
# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
|
||||
# can be passed to a watchdog handler
|
||||
# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
|
||||
# structures. The system manages a pool of preallocated
|
||||
# watchdog structures to minimize dynamic allocations
|
||||
# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
|
||||
# timer structures. The system manages a pool of preallocated
|
||||
# timer structures to minimize dynamic allocations. Set to
|
||||
# zero for all dynamic allocations.
|
||||
#
|
||||
CONFIG_MAX_TASKS=16
|
||||
CONFIG_MAX_TASK_ARGS=4
|
||||
CONFIG_NPTHREAD_KEYS=4
|
||||
CONFIG_NFILE_DESCRIPTORS=8
|
||||
CONFIG_NFILE_STREAMS=8
|
||||
CONFIG_NAME_MAX=32
|
||||
CONFIG_STDIO_BUFFER_SIZE=256
|
||||
CONFIG_NUNGET_CHARS=2
|
||||
CONFIG_PREALLOC_MQ_MSGS=4
|
||||
CONFIG_MQ_MAXMSGSIZE=32
|
||||
CONFIG_MAX_WDOGPARMS=2
|
||||
CONFIG_PREALLOC_WDOGS=4
|
||||
CONFIG_PREALLOC_TIMERS=4
|
||||
|
||||
#
|
||||
# Filesystem configuration
|
||||
#
|
||||
# CONFIG_FS_FAT - Enable FAT filesystem support
|
||||
# CONFIG_FAT_SECTORSIZE - Max supported sector size
|
||||
# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
|
||||
CONFIG_FS_FAT=n
|
||||
CONFIG_FS_ROMFS=n
|
||||
|
||||
#
|
||||
# SPI-based MMC/SD driver
|
||||
#
|
||||
# CONFIG_MMCSD_NSLOTS
|
||||
# Number of MMC/SD slots supported by the driver
|
||||
# CONFIG_MMCSD_READONLY
|
||||
# Provide read-only access (default is read/write)
|
||||
# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
|
||||
# Default is 20MHz.
|
||||
#
|
||||
CONFIG_MMCSD_NSLOTS=1
|
||||
CONFIG_MMCSD_READONLY=n
|
||||
CONFIG_MMCSD_SPICLOCK=12500000
|
||||
|
||||
#
|
||||
# Block driver buffering
|
||||
#
|
||||
# CONFIG_FS_READAHEAD
|
||||
# Enable read-ahead buffering
|
||||
# CONFIG_FS_WRITEBUFFER
|
||||
# Enable write buffering
|
||||
#
|
||||
CONFIG_FS_READAHEAD=n
|
||||
CONFIG_FS_WRITEBUFFER=n
|
||||
|
||||
#
|
||||
# SDIO-based MMC/SD driver
|
||||
#
|
||||
# CONFIG_SDIO_DMA
|
||||
# SDIO driver supports DMA
|
||||
# CONFIG_MMCSD_MMCSUPPORT
|
||||
# Enable support for MMC cards
|
||||
# CONFIG_MMCSD_HAVECARDDETECT
|
||||
# SDIO driver card detection is 100% accurate
|
||||
#
|
||||
CONFIG_SDIO_DMA=n
|
||||
CONFIG_MMCSD_MMCSUPPORT=n
|
||||
CONFIG_MMCSD_HAVECARDDETECT=n
|
||||
|
||||
#
|
||||
# TCP/IP and UDP support via uIP
|
||||
# CONFIG_NET - Enable or disable all network features
|
||||
# CONFIG_NET_IPv6 - Build in support for IPv6
|
||||
# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
|
||||
# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
|
||||
# CONFIG_NET_BUFSIZE - uIP buffer size
|
||||
# CONFIG_NET_TCP - TCP support on or off
|
||||
# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
|
||||
# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
|
||||
# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
|
||||
# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
|
||||
# accept() is called. The size of the backlog is selected when listen() is called.
|
||||
# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
|
||||
# CONFIG_NET_UDP - UDP support on or off
|
||||
# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
|
||||
# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
|
||||
# CONFIG_NET_ICMP - ICMP ping response support on or off
|
||||
# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
|
||||
# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
|
||||
# CONFIG_NET_STATISTICS - uIP statistics on or off
|
||||
# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
|
||||
# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
|
||||
# CONFIG_NET_BROADCAST - Broadcast support
|
||||
# CONFIG_NET_LLH_LEN - The link level header length
|
||||
# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
|
||||
#
|
||||
CONFIG_NET=n
|
||||
CONFIG_NET_IPv6=n
|
||||
CONFIG_NSOCKET_DESCRIPTORS=0
|
||||
CONFIG_NET_SOCKOPTS=y
|
||||
CONFIG_NET_BUFSIZE=420
|
||||
CONFIG_NET_TCP=n
|
||||
CONFIG_NET_TCP_CONNS=40
|
||||
CONFIG_NET_MAX_LISTENPORTS=40
|
||||
CONFIG_NET_UDP=n
|
||||
CONFIG_NET_UDP_CHECKSUMS=y
|
||||
#CONFIG_NET_UDP_CONNS=10
|
||||
CONFIG_NET_ICMP=n
|
||||
CONFIG_NET_ICMP_PING=n
|
||||
#CONFIG_NET_PINGADDRCONF=0
|
||||
CONFIG_NET_STATISTICS=y
|
||||
#CONFIG_NET_RECEIVE_WINDOW=
|
||||
#CONFIG_NET_ARPTAB_SIZE=8
|
||||
CONFIG_NET_BROADCAST=n
|
||||
#CONFIG_NET_LLH_LEN=14
|
||||
#CONFIG_NET_FWCACHE_SIZE=2
|
||||
|
||||
#
|
||||
# UIP Network Utilities
|
||||
# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
|
||||
# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
|
||||
#
|
||||
CONFIG_NET_DHCP_LIGHT=n
|
||||
CONFIG_NET_RESOLV_ENTRIES=4
|
||||
|
||||
#
|
||||
# USB Device Configuration
|
||||
#
|
||||
# CONFIG_USBDEV
|
||||
# Enables USB device support
|
||||
# CONFIG_USBDEV_ISOCHRONOUS
|
||||
# Build in extra support for isochronous endpoints
|
||||
# CONFIG_USBDEV_DUALSPEED
|
||||
# Hardware handles high and full speed operation (USB 2.0)
|
||||
# CONFIG_USBDEV_SELFPOWERED
|
||||
# Will cause USB features to indicate that the device is
|
||||
# self-powered
|
||||
# CONFIG_USBDEV_MAXPOWER
|
||||
# Maximum power consumption in mA
|
||||
# CONFIG_USBDEV_TRACE
|
||||
# Enables USB tracing for debug
|
||||
# CONFIG_USBDEV_TRACE_NRECORDS
|
||||
# Number of trace entries to remember
|
||||
#
|
||||
CONFIG_USBDEV=n
|
||||
CONFIG_USBDEV_ISOCHRONOUS=n
|
||||
CONFIG_USBDEV_DUALSPEED=n
|
||||
CONFIG_USBDEV_SELFPOWERED=y
|
||||
CONFIG_USBDEV_REMOTEWAKEUP=n
|
||||
CONFIG_USBDEV_MAXPOWER=100
|
||||
CONFIG_USBDEV_TRACE=n
|
||||
CONFIG_USBDEV_TRACE_NRECORDS=128
|
||||
|
||||
#
|
||||
# USB Serial Device Configuration
|
||||
#
|
||||
# CONFIG_USBSER
|
||||
# Enable compilation of the USB serial driver
|
||||
# CONFIG_USBSER_EPINTIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# interrupt IN operation
|
||||
# CONFIG_USBSER_EPBULKOUT
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk OUT operation
|
||||
# CONFIG_USBSER_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoint that supports
|
||||
# bulk IN operation
|
||||
# # CONFIG_USBSER_NWRREQS and CONFIG_USBSER_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSER_VENDORID and CONFIG_USBSER_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSER_PRODUCTID and CONFIG_USBSER_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSER_RXBUFSIZE and CONFIG_USBSER_TXBUFSIZE
|
||||
# Size of the serial receive/transmit buffers
|
||||
#
|
||||
CONFIG_USBSER=n
|
||||
CONFIG_USBSER_EPINTIN=1
|
||||
CONFIG_USBSER_EPBULKOUT=2
|
||||
CONFIG_USBSER_EPBULKIN=3
|
||||
CONFIG_USBSER_NWRREQS=4
|
||||
CONFIG_USBSER_NRDREQS=4
|
||||
CONFIG_USBSER_VENDORID=0x067b
|
||||
CONFIG_USBSER_PRODUCTID=0x2303
|
||||
CONFIG_USBSER_VENDORSTR="Nuttx"
|
||||
CONFIG_USBSER_PRODUCTSTR="USBdev Serial"
|
||||
CONFIG_USBSER_RXBUFSIZE=512
|
||||
CONFIG_USBSER_TXBUFSIZE=512
|
||||
|
||||
#
|
||||
# USB Storage Device Configuration
|
||||
#
|
||||
# CONFIG_USBSTRG
|
||||
# Enable compilation of the USB storage driver
|
||||
# CONFIG_USBSTRG_EP0MAXPACKET
|
||||
# Max packet size for endpoint 0
|
||||
# CONFIG_USBSTRG_EPBULKOUT and CONFIG_USBSTRG_EPBULKIN
|
||||
# The logical 7-bit address of a hardware endpoints that support
|
||||
# bulk OUT and IN operations
|
||||
# CONFIG_USBSTRG_NWRREQS and CONFIG_USBSTRG_NRDREQS
|
||||
# The number of write/read requests that can be in flight
|
||||
# CONFIG_USBSTRG_BULKINREQLEN and CONFIG_USBSTRG_BULKOUTREQLEN
|
||||
# The size of the buffer in each write/read request. This
|
||||
# value needs to be at least as large as the endpoint
|
||||
# maxpacket and ideally as large as a block device sector.
|
||||
# CONFIG_USBSTRG_VENDORID and CONFIG_USBSTRG_VENDORSTR
|
||||
# The vendor ID code/string
|
||||
# CONFIG_USBSTRG_PRODUCTID and CONFIG_USBSTRG_PRODUCTSTR
|
||||
# The product ID code/string
|
||||
# CONFIG_USBSTRG_REMOVABLE
|
||||
# Select if the media is removable
|
||||
#
|
||||
CONFIG_USBSTRG=n
|
||||
CONFIG_USBSTRG_EP0MAXPACKET=64
|
||||
CONFIG_USBSTRG_EPBULKOUT=2
|
||||
CONFIG_USBSTRG_EPBULKIN=5
|
||||
CONFIG_USBSTRG_NRDREQS=2
|
||||
CONFIG_USBSTRG_NWRREQS=2
|
||||
CONFIG_USBSTRG_BULKINREQLEN=256
|
||||
CONFIG_USBSTRG_BULKOUTREQLEN=256
|
||||
CONFIG_USBSTRG_VENDORID=0x584e
|
||||
CONFIG_USBSTRG_VENDORSTR="NuttX"
|
||||
CONFIG_USBSTRG_PRODUCTID=0x5342
|
||||
CONFIG_USBSTRG_PRODUCTSTR="USBdev Storage"
|
||||
CONFIG_USBSTRG_VERSIONNO=0x0399
|
||||
CONFIG_USBSTRG_REMOVABLE=y
|
||||
|
||||
#
|
||||
# Settings for examples/uip
|
||||
#
|
||||
CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLE_UIP_DHCPC=n
|
||||
|
||||
#
|
||||
# Settings for examples/nettest
|
||||
CONFIG_EXAMPLE_NETTEST_SERVER=n
|
||||
CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
|
||||
CONFIG_EXAMPLE_NETTEST_NOMAC=n
|
||||
CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
|
||||
|
||||
#
|
||||
# Settings for examples/ostest
|
||||
#
|
||||
CONFIG_EXAMPLES_OSTEST_LOOPS=1
|
||||
CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
|
||||
|
||||
#
|
||||
# Settings for examples/nsh
|
||||
#
|
||||
# CONFIG_EXAMPLES_NSH_FILEIOSIZE - Size of a static I/O buffer
|
||||
# CONFIG_EXAMPLES_NSH_STRERROR - Use strerror(errno)
|
||||
# CONFIG_EXAMPLES_NSH_LINELEN - Maximum length of one command line
|
||||
# CONFIG_EXAMPLES_NSH_STACKSIZE - Stack size to use for new threads.
|
||||
# CONFIG_EXAMPLES_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
|
||||
# CONFIG_EXAMPLES_NSH_DISABLESCRIPT - Disable scripting support
|
||||
# CONFIG_EXAMPLES_NSH_DISABLEBG - Disable background commands
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSETC - Use startup script in /etc
|
||||
# CONFIG_EXAMPLES_NSH_CONSOLE - Use serial console front end
|
||||
# CONFIG_EXAMPLES_NSH_TELNET - Use telnetd console front end
|
||||
# CONFIG_EXAMPLES_NSH_ARCHINIT - Platform provides architecture
|
||||
# specific initialization (nsh_archinitialize()).
|
||||
#
|
||||
# If CONFIG_EXAMPLES_NSH_TELNET is selected:
|
||||
# CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
|
||||
# CONFIG_EXAMPLES_NSH_DHCPC - Obtain address using DHCP
|
||||
# CONFIG_EXAMPLES_NSH_IPADDR - Provides static IP address
|
||||
# CONFIG_EXAMPLES_NSH_DRIPADDR - Provides static router IP address
|
||||
# CONFIG_EXAMPLES_NSH_NETMASK - Provides static network mask
|
||||
# CONFIG_EXAMPLES_NSH_NOMAC - Use a bogus MAC address
|
||||
#
|
||||
# If CONFIG_EXAMPLES_NSH_ROMFSETC is selected:
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT - ROMFS mountpoint
|
||||
# CONFIG_EXAMPLES_NSH_INITSCRIPT - Relative path to init script
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSDEVNO - ROMFS RAM device minor
|
||||
# CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE - ROMF sector size
|
||||
# CONFIG_EXAMPLES_NSH_FATDEVNO - FAT FS RAM device minor
|
||||
# CONFIG_EXAMPLES_NSH_FATSECTSIZE - FAT FS sector size
|
||||
# CONFIG_EXAMPLES_NSH_FATNSECTORS - FAT FS number of sectors
|
||||
# CONFIG_EXAMPLES_NSH_FATMOUNTPT - FAT FS mountpoint
|
||||
#
|
||||
CONFIG_EXAMPLES_NSH_FILEIOSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_STRERROR=n
|
||||
CONFIG_EXAMPLES_NSH_LINELEN=64
|
||||
CONFIG_EXAMPLES_NSH_STACKSIZE=2048
|
||||
CONFIG_EXAMPLES_NSH_NESTDEPTH=3
|
||||
CONFIG_EXAMPLES_NSH_DISABLESCRIPT=n
|
||||
CONFIG_EXAMPLES_NSH_DISABLEBG=n
|
||||
CONFIG_EXAMPLES_NSH_ROMFSETC=n
|
||||
CONFIG_EXAMPLES_NSH_CONSOLE=y
|
||||
CONFIG_EXAMPLES_NSH_TELNET=n
|
||||
CONFIG_EXAMPLES_NSH_ARCHINIT=n
|
||||
CONFIG_EXAMPLES_NSH_IOBUFFER_SIZE=512
|
||||
CONFIG_EXAMPLES_NSH_DHCPC=n
|
||||
CONFIG_EXAMPLES_NSH_NOMAC=n
|
||||
CONFIG_EXAMPLES_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
|
||||
CONFIG_EXAMPLES_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
|
||||
CONFIG_EXAMPLES_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
|
||||
CONFIG_EXAMPLES_NSH_ROMFSMOUNTPT="/etc"
|
||||
CONFIG_EXAMPLES_NSH_INITSCRIPT="init.d/rcS"
|
||||
CONFIG_EXAMPLES_NSH_ROMFSDEVNO=0
|
||||
CONFIG_EXAMPLES_NSH_ROMFSSECTSIZE=64
|
||||
CONFIG_EXAMPLES_NSH_FATDEVNO=1
|
||||
CONFIG_EXAMPLES_NSH_FATSECTSIZE=512
|
||||
CONFIG_EXAMPLES_NSH_FATNSECTORS=1024
|
||||
CONFIG_EXAMPLES_NSH_FATMOUNTPT=/tmp
|
||||
|
||||
#
|
||||
# Architecture-specific NSH options
|
||||
#
|
||||
CONFIG_EXAMPLES_NSH_MMCSDSPIPORTNO=0
|
||||
CONFIG_EXAMPLES_NSH_MMCSDSLOTNO=0
|
||||
CONFIG_EXAMPLES_NSH_MMCSDMINOR=0
|
||||
|
||||
#
|
||||
# Settings for examples/usbserial
|
||||
#
|
||||
# CONFIG_EXAMPLES_USBSERIAL_INONLY
|
||||
# Only verify IN (device-to-host) data transfers. Default: both
|
||||
# CONFIG_EXAMPLES_USBSERIAL_OUTONLY
|
||||
# Only verify OUT (host-to-device) data transfers. Default: both
|
||||
# CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL
|
||||
# Send only small, single packet messages. Default: Send large and small.
|
||||
# CONFIG_EXAMPLES_USBSERIAL_ONLYBIG
|
||||
# Send only large, multi-packet messages. Default: Send large and small.
|
||||
#
|
||||
CONFIG_EXAMPLES_USBSERIAL_INONLY=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_OUTONLY=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_ONLYSMALL=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_ONLYBIG=n
|
||||
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACEINIT=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACECLASS=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACETRANSFERS=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACECONTROLLER=n
|
||||
CONFIG_EXAMPLES_USBSERIAL_TRACEINTERRUPTS=n
|
||||
|
||||
#
|
||||
# Stack and heap information
|
||||
#
|
||||
# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
|
||||
# operation from FLASH but must copy initialized .data sections to RAM.
|
||||
# (should also be =n for the LPC17xx which always runs from flash)
|
||||
# CONFIG_BOOT_COPYTORAM - Some configurations boot in FLASH
|
||||
# but copy themselves entirely into RAM for better performance.
|
||||
# CONFIG_CUSTOM_STACK - The up_ implementation will handle
|
||||
# all stack operations outside of the nuttx model.
|
||||
# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
|
||||
# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
|
||||
# This is the thread that (1) performs the inital boot of the system up
|
||||
# to the point where user_start() is spawned, and (2) there after is the
|
||||
# IDLE thread that executes only when there is no other thread ready to
|
||||
# run.
|
||||
# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
|
||||
# for the main user thread that begins at the user_start() entry point.
|
||||
# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
|
||||
# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
|
||||
# CONFIG_HEAP_BASE - The beginning of the heap
|
||||
# CONFIG_HEAP_SIZE - The size of the heap
|
||||
#
|
||||
CONFIG_BOOT_RUNFROMFLASH=n
|
||||
CONFIG_BOOT_COPYTORAM=n
|
||||
CONFIG_CUSTOM_STACK=n
|
||||
CONFIG_STACK_POINTER=
|
||||
CONFIG_IDLETHREAD_STACKSIZE=1024
|
||||
CONFIG_USERMAIN_STACKSIZE=2048
|
||||
CONFIG_PTHREAD_STACK_MIN=256
|
||||
CONFIG_PTHREAD_STACK_DEFAULT=2048
|
||||
CONFIG_HEAP_BASE=
|
||||
CONFIG_HEAP_SIZE=
|
||||
109
configs/nucleus2g/ostest/ld.script
Executable file
109
configs/nucleus2g/ostest/ld.script
Executable file
@ -0,0 +1,109 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleus2g/ostest/ld.script
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/* The LPC1768 has 512Kb of FLASH beginning at address 0x0000:0000 and
|
||||
* 64Kb of total SRAM: 32Kb of SRAM in the CPU block beginning at address
|
||||
* 0x10000000 and 32Kb of AHB SRAM in two banks of 16Kb beginning at addresses
|
||||
* 0x20070000 and 0x20080000. Here we assume that .data and .bss will all fit
|
||||
* into the 32Kb CPU SRAM address range.
|
||||
*/
|
||||
|
||||
MEMORY
|
||||
{
|
||||
flash (rx) : ORIGIN = 0x00000000, LENGTH = 512K
|
||||
sram (rwx) : ORIGIN = 0x10000000, LENGTH = 32K
|
||||
}
|
||||
|
||||
OUTPUT_ARCH(arm)
|
||||
ENTRY(_stext)
|
||||
SECTIONS
|
||||
{
|
||||
.text : {
|
||||
_stext = ABSOLUTE(.);
|
||||
*(.vectors)
|
||||
*(.text .text.*)
|
||||
*(.fixup)
|
||||
*(.gnu.warning)
|
||||
*(.rodata .rodata.*)
|
||||
*(.gnu.linkonce.t.*)
|
||||
*(.glue_7)
|
||||
*(.glue_7t)
|
||||
*(.got)
|
||||
*(.gcc_except_table)
|
||||
*(.gnu.linkonce.r.*)
|
||||
_etext = ABSOLUTE(.);
|
||||
} > flash
|
||||
|
||||
_eronly = ABSOLUTE(.); /* See below */
|
||||
|
||||
.data : {
|
||||
_sdata = ABSOLUTE(.);
|
||||
*(.data .data.*)
|
||||
*(.gnu.linkonce.d.*)
|
||||
CONSTRUCTORS
|
||||
_edata = ABSOLUTE(.);
|
||||
} > sram AT > flash
|
||||
|
||||
.ARM.extab : {
|
||||
*(.ARM.extab*)
|
||||
} >sram
|
||||
|
||||
.ARM.exidx : {
|
||||
__exidx_start = ABSOLUTE(.);
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = ABSOLUTE(.);
|
||||
} >sram
|
||||
|
||||
.bss : { /* BSS */
|
||||
_sbss = ABSOLUTE(.);
|
||||
*(.bss .bss.*)
|
||||
*(.gnu.linkonce.b.*)
|
||||
*(COMMON)
|
||||
_ebss = ABSOLUTE(.);
|
||||
} > sram
|
||||
/* Stabs debugging sections. */
|
||||
.stab 0 : { *(.stab) }
|
||||
.stabstr 0 : { *(.stabstr) }
|
||||
.stab.excl 0 : { *(.stab.excl) }
|
||||
.stab.exclstr 0 : { *(.stab.exclstr) }
|
||||
.stab.index 0 : { *(.stab.index) }
|
||||
.stab.indexstr 0 : { *(.stab.indexstr) }
|
||||
.comment 0 : { *(.comment) }
|
||||
.debug_abbrev 0 : { *(.debug_abbrev) }
|
||||
.debug_info 0 : { *(.debug_info) }
|
||||
.debug_line 0 : { *(.debug_line) }
|
||||
.debug_pubnames 0 : { *(.debug_pubnames) }
|
||||
.debug_aranges 0 : { *(.debug_aranges) }
|
||||
}
|
||||
47
configs/nucleus2g/ostest/setenv.sh
Executable file
47
configs/nucleus2g/ostest/setenv.sh
Executable file
@ -0,0 +1,47 @@
|
||||
#!/bin/bash
|
||||
# configs/nucleus2g/ostest/setenv.sh
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
|
||||
if [ "$(basename $0)" = "setenv.sh" ] ; then
|
||||
echo "You must source this script, not run it!" 1>&2
|
||||
exit 1
|
||||
fi
|
||||
|
||||
if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
|
||||
|
||||
WD=`pwd`
|
||||
export RIDE_BIN="/cygdrive/c/Program Files/Raisonance/Ride/arm-gcc/bin"
|
||||
export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
|
||||
export PATH="${BUILDROOT_BIN}:${RIDE_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
|
||||
|
||||
echo "PATH : ${PATH}"
|
||||
84
configs/nucleus2g/src/Makefile
Executable file
84
configs/nucleus2g/src/Makefile
Executable file
@ -0,0 +1,84 @@
|
||||
############################################################################
|
||||
# configs/nucleus2g/src/Makefile
|
||||
#
|
||||
# Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
# Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without
|
||||
# modification, are permitted provided that the following conditions
|
||||
# are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright
|
||||
# notice, this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright
|
||||
# notice, this list of conditions and the following disclaimer in
|
||||
# the documentation and/or other materials provided with the
|
||||
# distribution.
|
||||
# 3. Neither the name NuttX nor the names of its contributors may be
|
||||
# used to endorse or promote products derived from this software
|
||||
# without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
# POSSIBILITY OF SUCH DAMAGE.
|
||||
#
|
||||
############################################################################
|
||||
|
||||
-include $(TOPDIR)/Make.defs
|
||||
|
||||
CFLAGS += -I$(TOPDIR)/sched
|
||||
|
||||
ASRCS =
|
||||
AOBJS = $(ASRCS:.S=$(OBJEXT))
|
||||
|
||||
CSRCS = up_boot.c up_leds.c
|
||||
COBJS = $(CSRCS:.c=$(OBJEXT))
|
||||
|
||||
SRCS = $(ASRCS) $(CSRCS)
|
||||
OBJS = $(AOBJS) $(COBJS)
|
||||
|
||||
ARCH_SRCDIR = $(TOPDIR)/arch/$(CONFIG_ARCH)/src
|
||||
ifeq ($(WINTOOL),y)
|
||||
CFLAGS += -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
|
||||
-I "${shell cygpath -w $(ARCH_SRCDIR)/cortexm3}"
|
||||
else
|
||||
CFLAGS += -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/cortexm3
|
||||
endif
|
||||
|
||||
all: libboard$(LIBEXT)
|
||||
|
||||
$(AOBJS): %$(OBJEXT): %.S
|
||||
$(call ASSEMBLE, $<, $@)
|
||||
|
||||
$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
|
||||
$(call COMPILE, $<, $@)
|
||||
|
||||
libboard$(LIBEXT): $(OBJS)
|
||||
@( for obj in $(OBJS) ; do \
|
||||
$(call ARCHIVE, $@, $${obj}); \
|
||||
done ; )
|
||||
|
||||
.depend: Makefile $(SRCS)
|
||||
@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
|
||||
@touch $@
|
||||
|
||||
depend: .depend
|
||||
|
||||
clean:
|
||||
@rm -f libboard$(LIBEXT) *~ .*.swp
|
||||
$(call CLEAN)
|
||||
|
||||
distclean: clean
|
||||
@rm -f Make.dep .depend
|
||||
|
||||
-include Make.dep
|
||||
89
configs/nucleus2g/src/nucleus2g_internal.h
Executable file
89
configs/nucleus2g/src/nucleus2g_internal.h
Executable file
@ -0,0 +1,89 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleus2g/src/nucleus2g_internal.h
|
||||
* arch/arm/src/board/nucleus2g_internal.n
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef _CONFIGS_NUCLEUS2G_SRC_NUCLEUS2G_INTERNAL_H
|
||||
#define _CONFIGS_NUCLEUS2G_SRC_NUCLEUS2G_INTERNAL_H
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
#include <nuttx/compiler.h>
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/* NUCLEUS-2G GPIO Pin Definitions **************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public data
|
||||
************************************************************************************/
|
||||
|
||||
#ifndef __ASSEMBLY__
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_spiinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to configure SPI chip select GPIO pins for the NUCLEUS-2G board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function lpc17_spiinitialize(void);
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_usbinitialize
|
||||
*
|
||||
* Description:
|
||||
* Called to setup USB-related GPIO pins for the NUCLEUS-2G board.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
extern void weak_function lpc17_usbinitialize(void);
|
||||
|
||||
#endif /* __ASSEMBLY__ */
|
||||
#endif /* _CONFIGS_NUCLEUS2G_SRC_NUCLEUS2G_INTERNAL_H */
|
||||
|
||||
103
configs/nucleus2g/src/up_boot.c
Executable file
103
configs/nucleus2g/src/up_boot.c
Executable file
@ -0,0 +1,103 @@
|
||||
/************************************************************************************
|
||||
* configs/nucleus2g/src/up_boot.c
|
||||
* arch/arm/src/board/up_boot.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "nucleus2g_internal.h"
|
||||
|
||||
/************************************************************************************
|
||||
* Definitions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Private Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
* Name: lpc17_boardinitialize
|
||||
*
|
||||
* Description:
|
||||
* All LPC17xx architectures must provide the following entry point. This entry point
|
||||
* is called early in the intitialization -- after all memory has been configured
|
||||
* and mapped but before any devices have been initialized.
|
||||
*
|
||||
************************************************************************************/
|
||||
|
||||
void lpc17_boardinitialize(void)
|
||||
{
|
||||
/* Configure SPI chip selects if 1) SPI is not disabled, and 2) the weak function
|
||||
* lpc17_spiinitialize() has been brought into the link.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_LPC17_SPI)
|
||||
if (lpc17_spiinitialize)
|
||||
{
|
||||
lpc17_spiinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Initialize USB if 1) USBDEV is selected, 2) the USB controller is not
|
||||
* disabled, and 3) the weak function lpc17_usbinitialize() has been brought
|
||||
* into the build.
|
||||
*/
|
||||
|
||||
#if defined(CONFIG_USBDEV) && defined(CONFIG_LPC17_USBDEV)
|
||||
if (lpc17_usbinitialize)
|
||||
{
|
||||
lpc17_usbinitialize();
|
||||
}
|
||||
#endif
|
||||
|
||||
/* Configure on-board LEDs if LED support has been selected. */
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
up_ledinit();
|
||||
#endif
|
||||
}
|
||||
111
configs/nucleus2g/src/up_leds.c
Executable file
111
configs/nucleus2g/src/up_leds.c
Executable file
@ -0,0 +1,111 @@
|
||||
/****************************************************************************
|
||||
* configs/nucleus2g/src/up_leds.c
|
||||
* arch/arm/src/board/up_leds.c
|
||||
*
|
||||
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <debug.h>
|
||||
|
||||
#include <arch/board/board.h>
|
||||
|
||||
#include "chip.h"
|
||||
#include "up_arch.h"
|
||||
#include "up_internal.h"
|
||||
#include "lpc17_internal.h"
|
||||
#include "nucleus2g_internal.h"
|
||||
|
||||
#ifdef CONFIG_ARCH_LEDS
|
||||
|
||||
/****************************************************************************
|
||||
* Definitions
|
||||
****************************************************************************/
|
||||
|
||||
/* Enables debug output from this file (needs CONFIG_DEBUG with
|
||||
* CONFIG_DEBUG_VERBOSE too)
|
||||
*/
|
||||
|
||||
#undef LED_DEBUG /* Define to enable debug */
|
||||
|
||||
#ifdef LED_DEBUG
|
||||
# define leddbg lldbg
|
||||
# define ledvdbg llvdbg
|
||||
#else
|
||||
# define leddbg(x...)
|
||||
# define ledvdbg(x...)
|
||||
#endif
|
||||
|
||||
/****************************************************************************
|
||||
* Private Data
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Private Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************/
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledinit
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledinit(void)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledon
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledon(int led)
|
||||
{
|
||||
}
|
||||
|
||||
/****************************************************************************
|
||||
* Name: up_ledoff
|
||||
****************************************************************************/
|
||||
|
||||
void up_ledoff(int led)
|
||||
{
|
||||
}
|
||||
|
||||
#endif /* CONFIG_ARCH_LEDS */
|
||||
Loading…
Reference in New Issue
Block a user