sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

SAM3/4: Add watchdog timer support. From Bob Doisin

Browse Source
This commit is contained in:
Gregory Nutt 2014-04-21 19:10:06 -06:00
parent 5eadd8df7a
commit f52ff8cf7b
8 changed files with 848 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
arch/arm/src/sam34/Kconfig
View File

@ -1189,10 +1189,10 @@ endmenu # USB Full Speed Device Controller driver (DCD) options
endif # SAM34_UDP
if SAM34_WDT
comment "AT91SAM3/4 Watchdog Configuration"|
menu "AT91SAM3/4 Watchdog Configuration"
config WDT_ENABLED_ON_RESET
bool "Enabled on reset"
bool "Watchdog Enabled on reset"
default n
---help---
The WDT can be enabled at reset. This is controlled by the WDTAUTO
@ -1204,7 +1204,7 @@ config WDT_ENABLED_ON_RESET
enabled.
config WDT_DISABLE_ON_RESET
bool "Disable on reset"
bool "Disable watchdog on reset"
default n
depends on WDT_ENABLED_ON_RESET
---help---
@ -1212,4 +1212,42 @@ config WDT_DISABLE_ON_RESET
configure and disable the watchdog timer very early in the boot
sequence.
config WDT_TIMEOUT
int "Watchdog Timeout (ms)"
default 4000
depends on !WDT_DISABLE_ON_RESET
---help---
Watchdog timeout value in milliseconds.
config WDT_MINTIME
int "Watchdog Minimum Time (ms)"
default 2000
depends on !WDT_DISABLE_ON_RESET
---help---
Minimum watchdog kick interval
menuconfig WDT_THREAD
bool "Watchdog Kicker Thread"
depends on !WDT_DISABLE_ON_RESET
default y
if WDT_THREAD
config WDT_THREAD_NAME
string "Watchdog Thread Name"
default "wdog"
config WDT_THREAD_INTERVAL
int "Watchdog Thread Interval (ms)"
default 2000
config WDT_THREAD_PRIORITY
int "Watchdog Thread Priority"
default 99
config WDT_THREAD_STACKSIZE
int "Watchdog Thread Stacksize"
default 1024
endif # WDT_THREAD
endmenu #"AT91SAM3/4 Watchdog device driver options"
endif # SAM34_WDT

4
arch/arm/src/sam34/Make.defs
View File

@ -133,3 +133,7 @@ endif
ifeq ($(CONFIG_SAM34_RTC),y)
CHIP_CSRCS += sam_rtc.c
endif
ifeq ($(CONFIG_SAM34_WDT),y)
CHIP_CSRCS += sam_wdt.c
endif

6
arch/arm/src/sam34/chip/sam_wdt.h
View File

@ -73,14 +73,16 @@
/* Watchdog Timer Mode Register */
#define WDT_MR_WDV_SHIFT (0) /* Bits 0-11: Watchdog Counter Value */
#define WDT_MR_WDV_MASK (0xfff << WDT_MR_WDV_SHIFT)
#define WDT_MR_WDV_MAX 0xfff
#define WDT_MR_WDV_MASK (WDT_MR_WDV_MAX << WDT_MR_WDV_SHIFT)
# define WDT_MR_WDV(n) ((uint32_t)(n) << WDT_MR_WDV_SHIFT)
#define WDT_MR_WDFIEN (1 << 12) /* Bit 12: Watchdog Fault Interrupt Enable */
#define WDT_MR_WDRSTEN (1 << 13) /* Bit 13: Watchdog Reset Enable */
#define WDT_MR_WDRPROC (1 << 14) /* Bit 14: Watchdog Reset Processor */
#define WDT_MR_WDDIS (1 << 15) /* Bit 15: Watchdog Disable */
#define WDT_MR_WDD_SHIFT (16) /* Bits 16-27: Watchdog Delta Value */
#define WDT_MR_WDD_MASK (0xfff << WDT_MR_WDD_SHIFT)
#define WDT_MR_WDD_MAX 0xfff
#define WDT_MR_WDD_MASK (WDT_MR_WDD_MAX << WDT_MR_WDD_SHIFT)
# define WDT_MR_WDD(n) ((uint32_t)(n) << WDT_MR_WDD_SHIFT)
#define WDT_MR_WDDBGHLT (1 << 28) /* Bit 28: Watchdog Debug Halt */
#define WDT_MR_WDIDLEHLT (1 << 29) /* Bit 29: Watchdog Idle Halt */

2
arch/arm/src/sam34/sam_clockconfig.c
View File

@ -121,7 +121,9 @@ static inline void sam_efcsetup(void)
static inline void sam_wdtsetup(void)
{
#if !defined(CONFIG_SAM34_WDT) || (defined(CONFIG_WDT_ENABLED_ON_RESET) && defined(CONFIG_WDT_DISABLE_ON_RESET))
putreg32(WDT_MR_WDDIS, SAM_WDT_MR);
#endif
}
/****************************************************************************

2
arch/arm/src/sam34/sam_serial.c
View File

@ -931,7 +931,7 @@ static int up_interrupt(int irq, void *context)
handled = true;
}
/* Handle outgoing, transmit bytes. XRDY: There is no character in the
/* Handle outgoing, transmit bytes. TXRDY: There is no character in the
* US_THR.
*/

8
arch/arm/src/sam34/sam_start.c
View File

@ -57,9 +57,6 @@
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#if defined(CONFIG_WDT_ENABLED_ON_RESET) && defined(CONFIG_WDT_DISABLE_ON_RESET)
# define NEED_WDT_DISABLE
#endif
/****************************************************************************
* Private Data
@ -124,11 +121,6 @@ void __start(void)
*dest++ = *src++;
}
#ifdef NEED_WDT_DISABLE
/* Disable the watchdog timer */
# warning Missing logic
#endif
/* Copy any necessary code sections from FLASH to RAM. The correct
* destination in SRAM is geive by _sramfuncs and _eramfuncs. The
* temporary location is in flash after the data initalization code

700
arch/arm/src/sam34/sam_wdt.c Normal file
View File

@ -0,0 +1,700 @@
/****************************************************************************
* arch/arm/src/sam34/sam_wdt.c
*
* Copyright (C) 2014 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include <nuttx/arch.h>
#include <sys/types.h>
#include <stdint.h>
#include <errno.h>
#include <debug.h>
#include <nuttx/watchdog.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "sam_wdt.h"
#if defined(CONFIG_WATCHDOG) && defined(CONFIG_SAM34_WDT)
/****************************************************************************
* Pre-Processor Definitions
****************************************************************************/
/* Clocking *****************************************************************/
/* The minimum frequency of the WWDG clock is:
*
* So the maximum delay (in milliseconds) is then:
*
* 1000 * (WDT_CR_WDV_MAX+1) / WDT_FCLK
*
* For example, if SCLK = 32768MHz, then the maximum delay is:
*
* Fmin = 1281.74
* 1000 * 64 / Fmin = 49.93 msec
*/
#define WDT_FCLK (BOARD_SLCK_FREQUENCY / 128)
#define WDT_MAXTIMEOUT ((1000 * (WDT_MR_WDV_MAX+1)) / WDT_FCLK)
/* Configuration ************************************************************/
#ifndef CONFIG_SAM34_WDT_DEFTIMOUT
# define CONFIG_SAM34_WDT_DEFTIMOUT WDT_MAXTIMEOUT
#endif
/* Debug ********************************************************************/
/* Non-standard debug that may be enabled just for testing the watchdog
* driver. NOTE: that only lldbg types are used so that the output is
* immediately available.
*/
#ifdef CONFIG_DEBUG_WATCHDOG
# define wddbg lldbg
# define wdvdbg llvdbg
#else
# define wddbg(x...)
# define wdvdbg(x...)
#endif
/****************************************************************************
* Private Types
****************************************************************************/
/* This structure provides the private representation of the "lower-half"
* driver state structure. This structure must be cast-compatible with the
* well-known watchdog_lowerhalf_s structure.
*/
struct sam34_lowerhalf_s
{
FAR const struct watchdog_ops_s *ops; /* Lower half operations */
xcpt_t handler; /* Current EWI interrupt handler */
uint32_t timeout; /* The actual timeout value */
bool started; /* The timer has been started */
uint16_t reload; /* The 12-bit reload field reset value (WDV) */
uint16_t window; /* The 12-bit window field value (WDD) */
};
/****************************************************************************
* Private Function Prototypes
****************************************************************************/
/* Register operations ******************************************************/
#if defined(CONFIG_SAM34_WDT_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32_t sam34_getreg(uint32_t addr);
static void sam34_putreg(uint32_t val, uint32_t addr);
#else
# define sam34_getreg(addr) getreg32(addr)
# define sam34_putreg(val,addr) putreg32(val,addr)
#endif
/* Interrupt handling *******************************************************/
static int sam34_interrupt(int irq, FAR void *context);
/* "Lower half" driver methods **********************************************/
static int sam34_start(FAR struct watchdog_lowerhalf_s *lower);
static int sam34_stop(FAR struct watchdog_lowerhalf_s *lower);
static int sam34_keepalive(FAR struct watchdog_lowerhalf_s *lower);
static int sam34_getstatus(FAR struct watchdog_lowerhalf_s *lower,
FAR struct watchdog_status_s *status);
static int sam34_settimeout(FAR struct watchdog_lowerhalf_s *lower,
uint32_t timeout);
static xcpt_t sam34_capture(FAR struct watchdog_lowerhalf_s *lower,
xcpt_t handler);
static int sam34_ioctl(FAR struct watchdog_lowerhalf_s *lower, int cmd,
unsigned long arg);
/****************************************************************************
* Private Data
****************************************************************************/
/* "Lower half" driver methods */
static const struct watchdog_ops_s g_wdgops =
{
.start = sam34_start,
.stop = sam34_stop,
.keepalive = sam34_keepalive,
.getstatus = sam34_getstatus,
.settimeout = sam34_settimeout,
.capture = sam34_capture,
.ioctl = sam34_ioctl,
};
/* "Lower half" driver state */
static struct sam34_lowerhalf_s g_wdgdev;
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Name: sam34_getreg
*
* Description:
* Get the contents of a register
*
****************************************************************************/
#if defined(CONFIG_SAM34_WDT_REGDEBUG) && defined(CONFIG_DEBUG)
static uint32_t sam34_getreg(uint32_t addr)
{
static uint32_t prevaddr = 0;
static uint32_t count = 0;
static uint32_t preval = 0;
/* Read the value from the register */
uint32_t val = getreg32(addr);
/* Is this the same value that we read from the same registe last time? Are
* we polling the register? If so, suppress some of the output.
*/
if (addr == prevaddr && val == preval)
{
if (count == 0xffffffff || ++count > 3)
{
if (count == 4)
{
lldbg("...\n");
}
return val;
}
}
/* No this is a new address or value */
else
{
/* Did we print "..." for the previous value? */
if (count > 3)
{
/* Yes.. then show how many times the value repeated */
lldbg("[repeats %d more times]\n", count-3);
}
/* Save the new address, value, and count */
prevaddr = addr;
preval = val;
count = 1;
}
/* Show the register value read */
lldbg("%08x->%08x\n", addr, val);
return val;
}
#endif
/****************************************************************************
* Name: sam34_putreg
*
* Description:
* Set the contents of an SAM34 register to a value
*
****************************************************************************/
#if defined(CONFIG_SAM34_WDT_REGDEBUG) && defined(CONFIG_DEBUG)
static void sam34_putreg(uint32_t val, uint32_t addr)
{
/* Show the register value being written */
lldbg("%08x<-%08x\n", addr, val);
/* Write the value */
putreg32(val, addr);
}
#endif
/****************************************************************************
* Name: sam34_interrupt
*
* Description:
* WDT interrupt
*
* Input Parameters:
* Usual interrupt handler arguments.
*
* Returned Values:
* Always returns OK.
*
****************************************************************************/
static int sam34_interrupt(int irq, FAR void *context)
{
FAR struct sam34_lowerhalf_s *priv = &g_wdgdev;
uint16_t regval;
/* Check if the EWI interrupt is really pending */
regval = sam34_getreg(SAM_WDT_SR);
if ((regval & (WDT_SR_WDUNF | WDT_SR_WDERR)) != 0)
{
/* Is there a registered handler? */
if (priv->handler)
{
/* Yes... NOTE: This interrupt service routine (ISR) must reload
* the WWDG counter to prevent the reset. Otherwise, we will reset
* upon return.
*/
priv->handler(irq, context);
}
/* The EWI interrupt is cleared by the WDT_SR register. */
}
return OK;
}
/****************************************************************************
* Name: sam34_start
*
* Description:
* Start the watchdog timer, resetting the time to the current timeout,
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int sam34_start(FAR struct watchdog_lowerhalf_s *lower)
{
FAR struct sam34_lowerhalf_s *priv = (FAR struct sam34_lowerhalf_s *)lower;
uint32_t mr_val = 0;
wdvdbg("Entry\n");
DEBUGASSERT(priv);
/* The watchdog is always disabled after a reset. It is enabled by setting
* the WDGA bit in the WWDG_CR register, then it cannot be disabled again
* except by a reset.
*/
#if defined(CONFIG_SAM34_JTAG_FULL_ENABLE) || \
defined(CONFIG_SAM34_JTAG_NOJNTRST_ENABLE) || \
defined(CONFIG_SAM34_JTAG_SW_ENABLE)
{
mr_val |= (WDT_MR_WDDBGHLT|WDT_MR_WDIDLEHLT);
}
#endif
/* TODO: WDT_MR_WDFIEN if handler available? WDT_MR_WDRPROC? */
mr_val |= (WDT_MR_WDD(priv->window) | WDT_MR_WDV(priv->reload) | WDT_MR_WDRSTEN);
sam34_putreg(mr_val, SAM_WDT_MR);
priv->started = true;
return OK;
}
/****************************************************************************
* Name: sam34_stop
*
* Description:
* Stop the watchdog timer
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int sam34_stop(FAR struct watchdog_lowerhalf_s *lower)
{
/* The watchdog is always disabled after a reset. It is enabled by clearing
* the WDDIS bit in the WDT_CR register, then it cannot be disabled again
* except by a reset.
*/
wdvdbg("Entry\n");
return -ENOSYS;
}
/****************************************************************************
* Name: sam34_keepalive
*
* Description:
* Reset the watchdog timer to the current timeout value, prevent any
* imminent watchdog timeouts. This is sometimes referred as "pinging"
* the watchdog timer or "petting the dog".
*
* The application program must write in the WDT_CR register at regular
* intervals during normal operation to prevent an MCU reset.
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int sam34_keepalive(FAR struct watchdog_lowerhalf_s *lower)
{
FAR struct sam34_lowerhalf_s *priv = (FAR struct sam34_lowerhalf_s *)lower;
wdvdbg("Entry\n");
DEBUGASSERT(priv);
sam34_putreg((WDT_CR_KEY | WDT_CR_WDRSTT), SAM_WDT_CR);
return OK;
}
/****************************************************************************
* Name: sam34_getstatus
*
* Description:
* Get the current watchdog timer status
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
* status - The location to return the watchdog status information.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int sam34_getstatus(FAR struct watchdog_lowerhalf_s *lower,
FAR struct watchdog_status_s *status)
{
FAR struct sam34_lowerhalf_s *priv = (FAR struct sam34_lowerhalf_s *)lower;
uint32_t elapsed;
uint16_t reload;
wdvdbg("Entry\n");
DEBUGASSERT(priv);
/* Return the status bit */
status->flags = WDFLAGS_RESET;
if (priv->started)
{
status->flags |= WDFLAGS_ACTIVE;
}
if (priv->handler)
{
status->flags |= WDFLAGS_CAPTURE;
}
/* Return the actual timeout is milliseconds */
status->timeout = priv->timeout;
/* Get the time remaining until the watchdog expires (in milliseconds) */
/* REVISIT: not sure if you can read this... */
elapsed = ((sam34_getreg(SAM_WDT_MR) & WDT_MR_WDV_MASK) >> WDT_MR_WDV_SHIFT);
status->timeleft = (priv->timeout * elapsed) / (priv->reload + 1);
wdvdbg("Status : %08x\n", sam34_getreg(SAM_WDT_SR));
wdvdbg(" flags : %08x\n", status->flags);
wdvdbg(" timeout : %d\n", status->timeout);
wdvdbg(" timeleft : %d\n", status->timeleft);
return OK;
}
/****************************************************************************
* Name: sam34_settimeout
*
* Description:
* Set a new timeout value (and reset the watchdog timer)
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
* timeout - The new timeout value in millisecnds.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int sam34_settimeout(FAR struct watchdog_lowerhalf_s *lower,
uint32_t timeout)
{
FAR struct sam34_lowerhalf_s *priv = (FAR struct sam34_lowerhalf_s *)lower;
uint32_t reload;
uint16_t regval;
DEBUGASSERT(priv);
wdvdbg("Entry: timeout=%d\n", timeout);
/* Can this timeout be represented? */
if (timeout < 1 || timeout > WDT_MAXTIMEOUT)
{
wddbg("Cannot represent timeout=%d > %d\n",
timeout, WDT_MAXTIMEOUT);
return -ERANGE;
}
reload = ((timeout * WDT_FCLK) / 1000) - 1;
/* Make sure that the final reload value is within range */
if (reload > WDT_MR_WDV_MAX)
{
reload = WDT_MR_WDV_MAX;
}
/* Calculate and save the actual timeout value in milliseconds:
*
* timeout = 1000 * (reload + 1) / Fwdt
*/
priv->timeout = 1000 * (reload + 1) / WDT_FCLK;
/* Remember the selected values */
priv->reload = reload;
wdvdbg("fwdt=%d reload=%d timout=%d\n",
WDT_FCLK, reload, priv->timeout);
/* Don't commit to MR register until started! */
return OK;
}
/****************************************************************************
* Name: sam34_capture
*
* Description:
* Don't reset on watchdog timer timeout; instead, call this user provider
* timeout handler. NOTE: Providing handler==NULL will restore the reset
* behavior.
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
* newhandler - The new watchdog expiration function pointer. If this
* function pointer is NULL, then the reset-on-expiration
* behavior is restored,
*
* Returned Values:
* The previous watchdog expiration function pointer or NULL is there was
* no previous function pointer, i.e., if the previous behavior was
* reset-on-expiration (NULL is also returned if an error occurs).
*
****************************************************************************/
static xcpt_t sam34_capture(FAR struct watchdog_lowerhalf_s *lower,
xcpt_t handler)
{
FAR struct sam34_lowerhalf_s *priv = (FAR struct sam34_lowerhalf_s *)lower;
irqstate_t flags;
xcpt_t oldhandler;
uint16_t regval;
DEBUGASSERT(priv);
wdvdbg("Entry: handler=%p\n", handler);
/* Get the old handler return value */
flags = irqsave();
#if 0 // TODO
oldhandler = priv->handler;
/* Save the new handler */
priv->handler = handler;
/* Are we attaching or detaching the handler? */
regval = sam34_getreg(SAM_WDT_CFR);
if (handler)
{
/* Attaching... Enable the EWI interrupt */
regval |= WWDG_CFR_EWI;
sam34_putreg(regval, SAM_WDT_CFR);
up_enable_irq(STM32_IRQ_WWDG);
}
else
{
/* Detaching... Disable the EWI interrupt */
regval &= ~WWDG_CFR_EWI;
sam34_putreg(regval, SAM_WDT_CFR);
up_disable_irq(STM32_IRQ_WWDG);
}
#endif
irqrestore(flags);
return oldhandler;
}
/****************************************************************************
* Name: sam34_ioctl
*
* Description:
* Any ioctl commands that are not recognized by the "upper-half" driver
* are forwarded to the lower half driver through this method.
*
* Input Parameters:
* lower - A pointer the publicly visible representation of the "lower-half"
* driver state structure.
* cmd - The ioctl command value
* arg - The optional argument that accompanies the 'cmd'. The
* interpretation of this argument depends on the particular
* command.
*
* Returned Values:
* Zero on success; a negated errno value on failure.
*
****************************************************************************/
static int sam34_ioctl(FAR struct watchdog_lowerhalf_s *lower, int cmd,
unsigned long arg)
{
FAR struct sam34_lowerhalf_s *priv = (FAR struct sam34_lowerhalf_s *)lower;
int ret = -ENOTTY;
DEBUGASSERT(priv);
wdvdbg("Entry: cmd=%d arg=%ld\n", cmd, arg);
/* WDIOC_MINTIME: Set the minimum ping time. If two keepalive ioctls
* are received within this time, a reset event will be generated.
* Argument: A 32-bit time value in milliseconds.
*/
if (cmd == WDIOC_MINTIME)
{
uint32_t mintime = (uint32_t)arg;
ret = -EINVAL;
if (priv->started)
{
ret = -ENOSYS; /* can't write the MR more than once! */
}
/* The minimum time should be strictly less than the total delay
* which, in turn, will be less than or equal to WDT_CR_MAX
*/
else if (mintime < priv->timeout)
{
uint32_t window = (((priv->timeout - mintime) * WDT_FCLK) / 1000) - 1;
DEBUGASSERT(window < priv->reload);
priv->window = window;
ret = OK;
}
}
return ret;
}
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sam_wdtinitialize
*
* Description:
* Initialize the WDT watchdog timer. The watchdog timer is initialized and
* registers as 'devpath'.
*
* Input Parameters:
* devpath - The full path to the watchdog. This should be of the form
* /dev/watchdog0
*
* Returned Values:
* None
*
****************************************************************************/
void sam_wdtinitialize(FAR const char *devpath)
{
FAR struct sam34_lowerhalf_s *priv = &g_wdgdev;
wdvdbg("Entry: devpath=%s\n", devpath);
/* NOTE we assume that clocking to the IWDG has already been provided by
* the RCC initialization logic.
*/
/* Initialize the driver state structure. Here we assume: (1) the state
* structure lies in .bss and was zeroed at reset time. (2) This function
* is only called once so it is never necessary to re-zero the structure.
*/
priv->ops = &g_wdgops;
/* Attach our EWI interrupt handler (But don't enable it yet) */
(void)irq_attach(SAM_IRQ_WDT, sam34_interrupt);
/* Select an arbitrary initial timeout value. But don't start the watchdog
* yet. NOTE: If the "Hardware watchdog" feature is enabled through the
* device option bits, the watchdog is automatically enabled at power-on.
*/
sam34_settimeout((FAR struct watchdog_lowerhalf_s *)priv,
CONFIG_WDT_TIMEOUT);
/* Register the watchdog driver as /dev/watchdog0 */
(void)watchdog_register(devpath, (FAR struct watchdog_lowerhalf_s *)priv);
}
#endif /* CONFIG_WATCHDOG && CONFIG_SAM34_WDT */

96
arch/arm/src/sam34/sam_wdt.h Normal file
View File

@ -0,0 +1,96 @@
/****************************************************************************
* arch/arm/src/sam34/sam_wdt.h
*
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
#ifndef __ARCH_ARM_SRC_SAM34_WDT_H
#define __ARCH_ARM_SRC_SAM34_WDT_H
/****************************************************************************
* Included Files
****************************************************************************/
#include <nuttx/config.h>
#include "chip.h"
#include "chip/sam_wdt.h"
#ifdef CONFIG_WATCHDOG
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
#ifndef __ASSEMBLY__
#undef EXTERN
#if defined(__cplusplus)
#define EXTERN extern "C"
extern "C" {
#else
#define EXTERN extern
#endif
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: sam_wdtinitialize
*
* Description:
* Initialize the watchdog timer. The watchdog timer is initialized and
* registers as 'devpath. The initial state of the watchdog time is
* disabled.
*
* Input Parameters:
* devpath - The full path to the watchdog. This should be of the form
* /dev/watchdog0
*
* Returned Values:
* None
*
****************************************************************************/
#ifdef CONFIG_SAM34_WDT
EXTERN void sam_wdtinitialize(FAR const char *devpath);
#endif
#undef EXTERN
#if defined(__cplusplus)
}
#endif
#endif /* __ASSEMBLY__ */
#endif /* CONFIG_WATCHDOG */
#endif /* __ARCH_ARM_SRC_STM32_STM32_WDG_H */