diff --git a/arch/arm/src/stm32f0/stm32f0_i2c.c b/arch/arm/src/stm32f0/stm32f0_i2c.c index 4d66aa3ac9..c782754fc3 100644 --- a/arch/arm/src/stm32f0/stm32f0_i2c.c +++ b/arch/arm/src/stm32f0/stm32f0_i2c.c @@ -990,25 +990,25 @@ static void stm32f0_i2c_setclock(FAR struct stm32f0_i2c_priv_s *priv, uint32_t f uint8_t scl_l_period; /* XXX haque; these are the only freqs we support at the moment, until we can - * compute the values ourself. + * compute the values ourself. Pick the highest supported frequency that does + * not exceed the requested frequency. */ - if (frequency == 10000) + if (frequency < 100000) { + frequency = 10000; /* 0Hz <= frequency < 100KHz: Use 10Khz */ } - else if (frequency == 100000) + else if (frequency < 400000) { + frequency = 100000; /* 100KHz <= frequency < 400KHz: Use 100KHz */ } - else if (frequency == 400000) + else if (frequency < 1000000) { + frequency = 400000; /* 400KHz <= frequency < 1MHz: Use 400Khz */ } else { -#if 1 - frequency = 1000000; -#else - frequency = 500000; -#endif + frequency = 1000000; /* 1MHz <= frequency: Use 1Mhz */ } /* Has the I2C bus frequency changed? */ @@ -1037,88 +1037,43 @@ static void stm32f0_i2c_setclock(FAR struct stm32f0_i2c_priv_s *priv, uint32_t f if (frequency == 10000) { -#if 1 - /* 10 KHz values from I2C timing tool with clock 80mhz */ + /* 10 KHz values from I2C timing tool with clock 8mhz */ - presc = 0x0b; /* PRESC - (+1) prescale I2CCLK */ - scl_l_period = 0xff; /* SCLL - SCL low period in master mode */ - scl_h_period = 0xba; /* SCLH - SCL high period in master mode */ - h_time = 0x00; /* SDADEL - (+1) data hold time after SCL falling edge */ - s_time = 0x01; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ - -#else - /* 10 KHz values from datasheet with clock 8mhz */ - - presc = 0x03; /* PRESC - (+1) prescale I2CCLK */ + presc = 0x01; /* PRESC - (+1) prescale I2CCLK */ scl_l_period = 0xc7; /* SCLL - SCL low period in master mode */ scl_h_period = 0xc3; /* SCLH - SCL high period in master mode */ h_time = 0x02; /* SDADEL - (+1) data hold time after SCL falling edge */ s_time = 0x04; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ -#endif } else if (frequency == 100000) { -#if 1 - /* 100 KHz values from I2C timing tool with clock 80mhz */ + /* 100 KHz values from I2C timing tool with clock 8mhz */ presc = 0x01; /* PRESC - (+1) prescale I2CCLK */ - scl_l_period = 0xe7; /* SCLL - SCL low period in master mode */ - scl_h_period = 0x9b; /* SCLH - SCL high period in master mode */ - h_time = 0x00; /* SDADEL - (+1) data hold time after SCL falling edge */ - s_time = 0x0d; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ -#else - /* 100 KHz values from datasheet with clock 8mhz */ - - presc = 0x01; - scl_l_period = 0x13; - scl_h_period = 0x0f; - h_time = 0x02; - s_time = 0x04; -#endif + scl_l_period = 0x13; /* SCLL - SCL low period in master mode */ + scl_h_period = 0x0f; /* SCLH - SCL high period in master mode */ + h_time = 0x02; /* SDADEL - (+1) data hold time after SCL falling edge */ + s_time = 0x04; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ } else if (frequency == 400000) { -#if 1 - /* 400 KHz values from I2C timing tool for clock of 80mhz */ + /* 400 KHz values from I2C timing tool for clock of 8mhz */ - presc = 0x01; /* PRESC - (+1) prescale I2CCLK */ - scl_l_period = 0x43; /* SCLL - SCL low period in master mode */ - scl_h_period = 0x13; /* SCLH - SCL high period in master mode */ - h_time = 0x00; /* SDADEL - (+1) data hold time after SCL falling edge */ - s_time = 0x07; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ -#else - /* 400 KHz values from datasheet for clock of 8mhz */ - - presc = 0x00; - scl_l_period = 0x09; - scl_h_period = 0x03; - h_time = 0x01; - s_time = 0x03; -#endif + presc = 0x00; /* PRESC - (+1) prescale I2CCLK */ + scl_l_period = 0x09; /* SCLL - SCL low period in master mode */ + scl_h_period = 0x03; /* SCLH - SCL high period in master mode */ + h_time = 0x01; /* SDADEL - (+1) data hold time after SCL falling edge */ + s_time = 0x03; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ } else { -#if 1 - /* 1000 KHhz values from I2C timing tool for clock of 80mhz */ + /* 1000 KHhz values from I2C timing tool for clock of 8mhz */ - presc = 0x01; /* PRESC - (+1) prescale I2CCLK */ - scl_l_period = 0x14; /* SCLL - SCL low period in master mode */ - scl_h_period = 0x13; /* SCLH - SCL high period in master mode */ + presc = 0x00; /* PRESC - (+1) prescale I2CCLK */ + scl_l_period = 0x06; /* SCLL - SCL low period in master mode */ + scl_h_period = 0x03; /* SCLH - SCL high period in master mode */ h_time = 0x00; /* SDADEL - (+1) data hold time after SCL falling edge */ - s_time = 0x05; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ - - frequency = 1000000; -#else - /* 500 KHhz values from datasheet for clock of 8mhz */ - - presc = 0x00; - scl_l_period = 0x06; - scl_h_period = 0x03; - h_time = 0x00; - s_time = 0x01; - - frequency = 500000; -#endif + s_time = 0x01; /* SCLDEL - (+1) data setup time from SDA edge to SCL rising edge */ } uint32_t timingr = diff --git a/configs/clicker2-stm32/README.txt b/configs/clicker2-stm32/README.txt index 810072c99c..bcc2cc93f6 100644 --- a/configs/clicker2-stm32/README.txt +++ b/configs/clicker2-stm32/README.txt @@ -224,6 +224,86 @@ Configurations Configuration sub-directories ----------------------------- + knsh: + + This is identical to the nsh configuration below except that NuttX + is built as a protected mode, monolithic module and the user applications + are built separately. + + It is recommends to use a special make command; not just 'make' but make + with the following two arguments: + + make pass1 pass2 + + In the normal case (just 'make'), make will attempt to build both user- + and kernel-mode blobs more or less interleaved. This actual works! + However, for me it is very confusing so I prefer the above make command: + Make the user-space binaries first (pass1), then make the kernel-space + binaries (pass2) + + NOTES: + + 1. At the end of the build, there will be several files in the top-level + NuttX build directory: + + PASS1: + nuttx_user.elf - The pass1 user-space ELF file + nuttx_user.hex - The pass1 Intel HEX format file (selected in defconfig) + User.map - Symbols in the user-space ELF file + + PASS2: + nuttx - The pass2 kernel-space ELF file + nuttx.hex - The pass2 Intel HEX file (selected in defconfig) + System.map - Symbols in the kernel-space ELF file + + The J-Link programmer will accept files in .hex, .mot, .srec, and .bin + formats. The St-Link programmer will accept files in hex and .bin + formats. + + 2. Combining .hex files. If you plan to use the .hex files with your + debugger or FLASH utility, then you may need to combine the two hex + files into a single .hex file. Here is how you can do that. + + a. The 'tail' of the nuttx.hex file should look something like this + (with my comments added): + + $ tail nuttx.hex + # 00, data records + ... + :10 9DC0 00 01000000000800006400020100001F0004 + :10 9DD0 00 3B005A0078009700B500D400F300110151 + :08 9DE0 00 30014E016D0100008D + # 05, Start Linear Address Record + :04 0000 05 0800 0419 D2 + # 01, End Of File record + :00 0000 01 FF + + Use an editor such as vi to remove the 05 and 01 records. + + b. The 'head' of the nuttx_user.hex file should look something like + this (again with my comments added): + + $ head nuttx_user.hex + # 04, Extended Linear Address Record + :02 0000 04 0801 F1 + # 00, data records + :10 8000 00 BD89 01084C800108C8110208D01102087E + :10 8010 00 0010 00201C1000201C1000203C16002026 + :10 8020 00 4D80 01085D80010869800108ED83010829 + ... + + Nothing needs to be done here. The nuttx_user.hex file should + be fine. + + c. Combine the edited nuttx.hex and un-edited nuttx_user.hex + file to produce a single combined hex file: + + $ cat nuttx.hex nuttx_user.hex >combined.hex + + Then use the combined.hex file with the to write the FLASH image. + If you do this a lot, you will probably want to invest a little time + to develop a tool to automate these steps. + nsh: Configures the NuttShell (nsh) located at examples/nsh. This diff --git a/configs/clicker2-stm32/knsh/Make.defs b/configs/clicker2-stm32/knsh/Make.defs new file mode 100644 index 0000000000..c9139eeba7 --- /dev/null +++ b/configs/clicker2-stm32/knsh/Make.defs @@ -0,0 +1,122 @@ +############################################################################ +# configs/clicker2-stm32/knsh/Make.defs +# +# Copyright (C) 2017 Gregory Nutt. All rights reserved. +# Author: Gregory Nutt +# +# Redistribution and use in source and binary forms, with or without +# modification, are permitted provided that the following conditions +# are met: +# +# 1. Redistributions of source code must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# 2. Redistributions in binary form must reproduce the above copyright +# notice, this list of conditions and the following disclaimer in +# the documentation and/or other materials provided with the +# distribution. +# 3. Neither the name NuttX nor the names of its contributors may be +# used to endorse or promote products derived from this software +# without specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS +# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE +# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, +# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, +# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS +# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED +# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT +# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN +# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE +# POSSIBILITY OF SUCH DAMAGE. +# +############################################################################ + +include ${TOPDIR}/.config +include ${TOPDIR}/tools/Config.mk +include ${TOPDIR}/arch/arm/src/armv7-m/Toolchain.defs + +LDSCRIPT = flash.ld + +ifeq ($(WINTOOL),y) + # Windows-native toolchains + DIRLINK = $(TOPDIR)/tools/copydir.sh + DIRUNLINK = $(TOPDIR)/tools/unlink.sh + MKDEP = $(TOPDIR)/tools/mkwindeps.sh + ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" + ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}" + ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT)}" +else + # Linux/Cygwin-native toolchain + MKDEP = $(TOPDIR)/tools/mkdeps$(HOSTEXEEXT) + ARCHINCLUDES = -I. -isystem $(TOPDIR)/include + ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx + ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/scripts/$(LDSCRIPT) +endif + +CC = $(CROSSDEV)gcc +CXX = $(CROSSDEV)g++ +CPP = $(CROSSDEV)gcc -E +LD = $(CROSSDEV)ld +AR = $(CROSSDEV)ar rcs +NM = $(CROSSDEV)nm +OBJCOPY = $(CROSSDEV)objcopy +OBJDUMP = $(CROSSDEV)objdump + +ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'} +ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1} + +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + ARCHOPTIMIZATION = -g +endif + +ifneq ($(CONFIG_DEBUG_NOOPT),y) + ARCHOPTIMIZATION += $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer +endif + +ARCHCFLAGS = -fno-builtin +ARCHCXXFLAGS = -fno-builtin -fno-exceptions -fcheck-new -fno-rtti +ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow -Wundef +ARCHWARNINGSXX = -Wall -Wshadow -Wundef +ARCHDEFINES = +ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10 + +CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS) +CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe +CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS) +CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) +AFLAGS = $(CFLAGS) -D__ASSEMBLY__ + +NXFLATLDFLAGS1 = -r -d -warn-common +NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat-gotoff.ld -no-check-sections +LDNXFLATFLAGS = -e main -s 2048 + +# Loadable module definitions + +CMODULEFLAGS = $(CFLAGS) -mlong-calls # --target1-abs + +LDMODULEFLAGS = -r -e module_initialize +ifeq ($(WINTOOL),y) + LDMODULEFLAGS += -T "${shell cygpath -w $(TOPDIR)/libc/modlib/gnu-elf.ld}" +else + LDMODULEFLAGS += -T $(TOPDIR)/libc/modlib/gnu-elf.ld +endif + +ASMEXT = .S +OBJEXT = .o +LIBEXT = .a +EXEEXT = + +ifneq ($(CROSSDEV),arm-nuttx-elf-) + LDFLAGS += -nostartfiles -nodefaultlibs +endif +ifeq ($(CONFIG_DEBUG_SYMBOLS),y) + LDFLAGS += -g +endif + +HOSTCC = gcc +HOSTINCLUDES = -I. +HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -Wundef -g -pipe +HOSTLDFLAGS = diff --git a/configs/clicker2-stm32/knsh/defconfig b/configs/clicker2-stm32/knsh/defconfig new file mode 100644 index 0000000000..ed981e5a97 --- /dev/null +++ b/configs/clicker2-stm32/knsh/defconfig @@ -0,0 +1,1332 @@ +# +# Automatically generated file; DO NOT EDIT. +# Nuttx/ Configuration +# + +# +# Build Setup +# +# CONFIG_EXPERIMENTAL is not set +# CONFIG_DEFAULT_SMALL is not set +CONFIG_HOST_LINUX=y +# CONFIG_HOST_OSX is not set +# CONFIG_HOST_WINDOWS is not set +# CONFIG_HOST_OTHER is not set + +# +# Build Configuration +# +# CONFIG_APPS_DIR="../apps" +# CONFIG_BUILD_FLAT is not set +CONFIG_BUILD_PROTECTED=y +CONFIG_BUILD_2PASS=y +CONFIG_PASS1_TARGET="all" +CONFIG_PASS1_BUILDIR="configs/clicker2-stm32/kernel" +CONFIG_PASS1_OBJECT="" +CONFIG_NUTTX_USERSPACE=0x08020000 + +# +# Binary Output Formats +# +# CONFIG_RRLOAD_BINARY is not set +CONFIG_INTELHEX_BINARY=y +# CONFIG_MOTOROLA_SREC is not set +CONFIG_RAW_BINARY=y +# CONFIG_UBOOT_UIMAGE is not set + +# +# Customize Header Files +# +# CONFIG_ARCH_STDINT_H is not set +# CONFIG_ARCH_STDBOOL_H is not set +# CONFIG_ARCH_MATH_H is not set +# CONFIG_ARCH_FLOAT_H is not set +# CONFIG_ARCH_STDARG_H is not set +# CONFIG_ARCH_DEBUG_H is not set + +# +# Debug Options +# +CONFIG_DEBUG_ALERT=y +# CONFIG_DEBUG_FEATURES is not set +CONFIG_ARCH_HAVE_STACKCHECK=y +# CONFIG_STACK_COLORATION is not set +CONFIG_ARCH_HAVE_HEAPCHECK=y +# CONFIG_HEAP_COLORATION is not set +# CONFIG_DEBUG_SYMBOLS is not set +CONFIG_ARCH_HAVE_CUSTOMOPT=y +# CONFIG_DEBUG_NOOPT is not set +# CONFIG_DEBUG_CUSTOMOPT is not set +CONFIG_DEBUG_FULLOPT=y + +# +# System Type +# +CONFIG_ARCH_ARM=y +# CONFIG_ARCH_AVR is not set +# CONFIG_ARCH_HC is not set +# CONFIG_ARCH_MIPS is not set +# CONFIG_ARCH_MISOC is not set +# CONFIG_ARCH_RENESAS is not set +# CONFIG_ARCH_RISCV is not set +# CONFIG_ARCH_SIM is not set +# CONFIG_ARCH_X86 is not set +# CONFIG_ARCH_XTENSA is not set +# CONFIG_ARCH_Z16 is not set +# CONFIG_ARCH_Z80 is not set +CONFIG_ARCH="arm" + +# +# ARM Options +# +# CONFIG_ARCH_CHIP_A1X is not set +# CONFIG_ARCH_CHIP_C5471 is not set +# CONFIG_ARCH_CHIP_DM320 is not set +# CONFIG_ARCH_CHIP_EFM32 is not set +# CONFIG_ARCH_CHIP_IMX1 is not set +# CONFIG_ARCH_CHIP_IMX6 is not set +# CONFIG_ARCH_CHIP_KINETIS is not set +# CONFIG_ARCH_CHIP_KL is not set +# CONFIG_ARCH_CHIP_LM is not set +# CONFIG_ARCH_CHIP_TIVA is not set +# CONFIG_ARCH_CHIP_LPC11XX is not set +# CONFIG_ARCH_CHIP_LPC17XX is not set +# CONFIG_ARCH_CHIP_LPC214X is not set +# CONFIG_ARCH_CHIP_LPC2378 is not set +# CONFIG_ARCH_CHIP_LPC31XX is not set +# CONFIG_ARCH_CHIP_LPC43XX is not set +# CONFIG_ARCH_CHIP_MOXART is not set +# CONFIG_ARCH_CHIP_NUC1XX is not set +# CONFIG_ARCH_CHIP_SAMA5 is not set +# CONFIG_ARCH_CHIP_SAMD is not set +# CONFIG_ARCH_CHIP_SAML is not set +# CONFIG_ARCH_CHIP_SAM34 is not set +# CONFIG_ARCH_CHIP_SAMV7 is not set +CONFIG_ARCH_CHIP_STM32=y +# CONFIG_ARCH_CHIP_STM32F0 is not set +# CONFIG_ARCH_CHIP_STM32F7 is not set +# CONFIG_ARCH_CHIP_STM32L4 is not set +# CONFIG_ARCH_CHIP_STR71X is not set +# CONFIG_ARCH_CHIP_TMS570 is not set +# CONFIG_ARCH_CHIP_XMC4 is not set +# CONFIG_ARCH_ARM7TDMI is not set +# CONFIG_ARCH_ARM926EJS is not set +# CONFIG_ARCH_ARM920T is not set +# CONFIG_ARCH_CORTEXM0 is not set +# CONFIG_ARCH_CORTEXM23 is not set +# CONFIG_ARCH_CORTEXM3 is not set +# CONFIG_ARCH_CORTEXM33 is not set +CONFIG_ARCH_CORTEXM4=y +# CONFIG_ARCH_CORTEXM7 is not set +# CONFIG_ARCH_CORTEXA5 is not set +# CONFIG_ARCH_CORTEXA8 is not set +# CONFIG_ARCH_CORTEXA9 is not set +# CONFIG_ARCH_CORTEXR4 is not set +# CONFIG_ARCH_CORTEXR4F is not set +# CONFIG_ARCH_CORTEXR5 is not set +# CONFIG_ARCH_CORTEX5F is not set +# CONFIG_ARCH_CORTEXR7 is not set +# CONFIG_ARCH_CORTEXR7F is not set +CONFIG_ARCH_FAMILY="armv7-m" +CONFIG_ARCH_CHIP="stm32" +# CONFIG_ARM_TOOLCHAIN_IAR is not set +CONFIG_ARM_TOOLCHAIN_GNU=y +# CONFIG_ARMV7M_USEBASEPRI is not set +CONFIG_ARCH_HAVE_CMNVECTOR=y +# CONFIG_ARMV7M_CMNVECTOR is not set +# CONFIG_ARMV7M_LAZYFPU is not set +CONFIG_ARCH_HAVE_FPU=y +# CONFIG_ARCH_HAVE_DPFPU is not set +CONFIG_ARCH_FPU=y +# CONFIG_ARCH_HAVE_TRUSTZONE is not set +CONFIG_ARM_HAVE_MPU_UNIFIED=y +CONFIG_ARM_MPU=y +CONFIG_ARM_MPU_NREGIONS=8 + +# +# ARMV7M Configuration Options +# +# CONFIG_ARMV7M_HAVE_ICACHE is not set +# CONFIG_ARMV7M_HAVE_DCACHE is not set +# CONFIG_ARMV7M_HAVE_ITCM is not set +# CONFIG_ARMV7M_HAVE_DTCM is not set +# CONFIG_ARMV7M_TOOLCHAIN_IARL is not set +# CONFIG_ARMV7M_TOOLCHAIN_BUILDROOT is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODEREDL is not set +# CONFIG_ARMV7M_TOOLCHAIN_CODESOURCERYL is not set +CONFIG_ARMV7M_TOOLCHAIN_GNU_EABIL=y +CONFIG_ARMV7M_HAVE_STACKCHECK=y +# CONFIG_ARMV7M_STACKCHECK is not set +# CONFIG_ARMV7M_ITMSYSLOG is not set +# CONFIG_SERIAL_TERMIOS is not set + +# +# STM32 Configuration Options +# +# CONFIG_ARCH_CHIP_STM32L151C6 is not set +# CONFIG_ARCH_CHIP_STM32L151C8 is not set +# CONFIG_ARCH_CHIP_STM32L151CB is not set +# CONFIG_ARCH_CHIP_STM32L151R6 is not set +# CONFIG_ARCH_CHIP_STM32L151R8 is not set +# CONFIG_ARCH_CHIP_STM32L151RB is not set +# CONFIG_ARCH_CHIP_STM32L151V6 is not set +# CONFIG_ARCH_CHIP_STM32L151V8 is not set +# CONFIG_ARCH_CHIP_STM32L151VB is not set +# CONFIG_ARCH_CHIP_STM32L152C6 is not set +# CONFIG_ARCH_CHIP_STM32L152C8 is not set +# CONFIG_ARCH_CHIP_STM32L152CB is not set +# CONFIG_ARCH_CHIP_STM32L152R6 is not set +# CONFIG_ARCH_CHIP_STM32L152R8 is not set +# CONFIG_ARCH_CHIP_STM32L152RB is not set +# CONFIG_ARCH_CHIP_STM32L152V6 is not set +# CONFIG_ARCH_CHIP_STM32L152V8 is not set +# CONFIG_ARCH_CHIP_STM32L152VB is not set +# CONFIG_ARCH_CHIP_STM32L152CC is not set +# CONFIG_ARCH_CHIP_STM32L152RC is not set +# CONFIG_ARCH_CHIP_STM32L152VC is not set +# CONFIG_ARCH_CHIP_STM32L162ZD is not set +# CONFIG_ARCH_CHIP_STM32L162VE is not set +# CONFIG_ARCH_CHIP_STM32F100C8 is not set +# CONFIG_ARCH_CHIP_STM32F100CB is not set +# CONFIG_ARCH_CHIP_STM32F100R8 is not set +# CONFIG_ARCH_CHIP_STM32F100RB is not set +# CONFIG_ARCH_CHIP_STM32F100RC is not set +# CONFIG_ARCH_CHIP_STM32F100RD is not set +# CONFIG_ARCH_CHIP_STM32F100RE is not set +# CONFIG_ARCH_CHIP_STM32F100V8 is not set +# CONFIG_ARCH_CHIP_STM32F100VB is not set +# CONFIG_ARCH_CHIP_STM32F100VC is not set +# CONFIG_ARCH_CHIP_STM32F100VD is not set +# CONFIG_ARCH_CHIP_STM32F100VE is not set +# CONFIG_ARCH_CHIP_STM32F102CB is not set +# CONFIG_ARCH_CHIP_STM32F103T8 is not set +# CONFIG_ARCH_CHIP_STM32F103TB is not set +# CONFIG_ARCH_CHIP_STM32F103C4 is not set +# CONFIG_ARCH_CHIP_STM32F103C8 is not set +# CONFIG_ARCH_CHIP_STM32F103CB is not set +# CONFIG_ARCH_CHIP_STM32F103R8 is not set +# CONFIG_ARCH_CHIP_STM32F103RB is not set +# CONFIG_ARCH_CHIP_STM32F103RC is not set +# CONFIG_ARCH_CHIP_STM32F103RD is not set +# CONFIG_ARCH_CHIP_STM32F103RE is not set +# CONFIG_ARCH_CHIP_STM32F103RG is not set +# CONFIG_ARCH_CHIP_STM32F103V8 is not set +# CONFIG_ARCH_CHIP_STM32F103VB is not set +# CONFIG_ARCH_CHIP_STM32F103VC is not set +# CONFIG_ARCH_CHIP_STM32F103VE is not set +# CONFIG_ARCH_CHIP_STM32F103ZE is not set +# CONFIG_ARCH_CHIP_STM32F105VB is not set +# CONFIG_ARCH_CHIP_STM32F105RB is not set +# CONFIG_ARCH_CHIP_STM32F107VC is not set +# CONFIG_ARCH_CHIP_STM32F205RG is not set +# CONFIG_ARCH_CHIP_STM32F207IG is not set +# CONFIG_ARCH_CHIP_STM32F207ZE is not set +# CONFIG_ARCH_CHIP_STM32F302K6 is not set +# CONFIG_ARCH_CHIP_STM32F302K8 is not set +# CONFIG_ARCH_CHIP_STM32F302CB is not set +# CONFIG_ARCH_CHIP_STM32F302CC is not set +# CONFIG_ARCH_CHIP_STM32F302RB is not set +# CONFIG_ARCH_CHIP_STM32F302RC is not set +# CONFIG_ARCH_CHIP_STM32F302VB is not set +# CONFIG_ARCH_CHIP_STM32F302VC is not set +# CONFIG_ARCH_CHIP_STM32F303K6 is not set +# CONFIG_ARCH_CHIP_STM32F303K8 is not set +# CONFIG_ARCH_CHIP_STM32F303C6 is not set +# CONFIG_ARCH_CHIP_STM32F303C8 is not set +# CONFIG_ARCH_CHIP_STM32F303CB is not set +# CONFIG_ARCH_CHIP_STM32F303CC is not set +# CONFIG_ARCH_CHIP_STM32F303RB is not set +# CONFIG_ARCH_CHIP_STM32F303RC is not set +# CONFIG_ARCH_CHIP_STM32F303RD is not set +# CONFIG_ARCH_CHIP_STM32F303RE is not set +# CONFIG_ARCH_CHIP_STM32F303VB is not set +# CONFIG_ARCH_CHIP_STM32F303VC is not set +# CONFIG_ARCH_CHIP_STM32F334K4 is not set +# CONFIG_ARCH_CHIP_STM32F334K6 is not set +# CONFIG_ARCH_CHIP_STM32F334K8 is not set +# CONFIG_ARCH_CHIP_STM32F334C4 is not set +# CONFIG_ARCH_CHIP_STM32F334C6 is not set +# CONFIG_ARCH_CHIP_STM32F334C8 is not set +# CONFIG_ARCH_CHIP_STM32F334R4 is not set +# CONFIG_ARCH_CHIP_STM32F334R6 is not set +# CONFIG_ARCH_CHIP_STM32F334R8 is not set +# CONFIG_ARCH_CHIP_STM32F372C8 is not set +# CONFIG_ARCH_CHIP_STM32F372R8 is not set +# CONFIG_ARCH_CHIP_STM32F372V8 is not set +# CONFIG_ARCH_CHIP_STM32F372CB is not set +# CONFIG_ARCH_CHIP_STM32F372RB is not set +# CONFIG_ARCH_CHIP_STM32F372VB is not set +# CONFIG_ARCH_CHIP_STM32F372CC is not set +# CONFIG_ARCH_CHIP_STM32F372RC is not set +# CONFIG_ARCH_CHIP_STM32F372VC is not set +# CONFIG_ARCH_CHIP_STM32F373C8 is not set +# CONFIG_ARCH_CHIP_STM32F373R8 is not set +# CONFIG_ARCH_CHIP_STM32F373V8 is not set +# CONFIG_ARCH_CHIP_STM32F373CB is not set +# CONFIG_ARCH_CHIP_STM32F373RB is not set +# CONFIG_ARCH_CHIP_STM32F373VB is not set +# CONFIG_ARCH_CHIP_STM32F373CC is not set +# CONFIG_ARCH_CHIP_STM32F373RC is not set +# CONFIG_ARCH_CHIP_STM32F373VC is not set +# CONFIG_ARCH_CHIP_STM32F401RE is not set +# CONFIG_ARCH_CHIP_STM32F411RE is not set +# CONFIG_ARCH_CHIP_STM32F411VE is not set +# CONFIG_ARCH_CHIP_STM32F405RG is not set +# CONFIG_ARCH_CHIP_STM32F405VG is not set +# CONFIG_ARCH_CHIP_STM32F405ZG is not set +# CONFIG_ARCH_CHIP_STM32F407VE is not set +CONFIG_ARCH_CHIP_STM32F407VG=y +# CONFIG_ARCH_CHIP_STM32F407ZE is not set +# CONFIG_ARCH_CHIP_STM32F407ZG is not set +# CONFIG_ARCH_CHIP_STM32F407IE is not set +# CONFIG_ARCH_CHIP_STM32F407IG is not set +# CONFIG_ARCH_CHIP_STM32F427V is not set +# CONFIG_ARCH_CHIP_STM32F427Z is not set +# CONFIG_ARCH_CHIP_STM32F427I is not set +# CONFIG_ARCH_CHIP_STM32F429V is not set +# CONFIG_ARCH_CHIP_STM32F429Z is not set +# CONFIG_ARCH_CHIP_STM32F429I is not set +# CONFIG_ARCH_CHIP_STM32F429B is not set +# CONFIG_ARCH_CHIP_STM32F429N is not set +# CONFIG_ARCH_CHIP_STM32F446M is not set +# CONFIG_ARCH_CHIP_STM32F446R is not set +# CONFIG_ARCH_CHIP_STM32F446V is not set +# CONFIG_ARCH_CHIP_STM32F446Z is not set +# CONFIG_ARCH_CHIP_STM32F469A is not set +# CONFIG_ARCH_CHIP_STM32F469I is not set +# CONFIG_ARCH_CHIP_STM32F469B is not set +# CONFIG_ARCH_CHIP_STM32F469N is not set +CONFIG_STM32_FLASH_CONFIG_DEFAULT=y +# CONFIG_STM32_FLASH_CONFIG_4 is not set +# CONFIG_STM32_FLASH_CONFIG_6 is not set +# CONFIG_STM32_FLASH_CONFIG_8 is not set +# CONFIG_STM32_FLASH_CONFIG_B is not set +# CONFIG_STM32_FLASH_CONFIG_C is not set +# CONFIG_STM32_FLASH_CONFIG_D is not set +# CONFIG_STM32_FLASH_CONFIG_E is not set +# CONFIG_STM32_FLASH_CONFIG_F is not set +# CONFIG_STM32_FLASH_CONFIG_G is not set +# CONFIG_STM32_FLASH_CONFIG_I is not set +# CONFIG_STM32_STM32L15XX is not set +# CONFIG_STM32_ENERGYLITE is not set +# CONFIG_STM32_STM32F10XX is not set +# CONFIG_STM32_VALUELINE is not set +# CONFIG_STM32_CONNECTIVITYLINE is not set +# CONFIG_STM32_PERFORMANCELINE is not set +# CONFIG_STM32_USBACCESSLINE is not set +# CONFIG_STM32_HIGHDENSITY is not set +# CONFIG_STM32_MEDIUMDENSITY is not set +# CONFIG_STM32_LOWDENSITY is not set +# CONFIG_STM32_STM32F20XX is not set +# CONFIG_STM32_STM32F205 is not set +# CONFIG_STM32_STM32F207 is not set +# CONFIG_STM32_STM32F30XX is not set +# CONFIG_STM32_STM32F302 is not set +# CONFIG_STM32_STM32F303 is not set +# CONFIG_STM32_STM32F33XX is not set +# CONFIG_STM32_STM32F37XX is not set +CONFIG_STM32_STM32F40XX=y +# CONFIG_STM32_STM32F401 is not set +# CONFIG_STM32_STM32F411 is not set +# CONFIG_STM32_STM32F405 is not set +CONFIG_STM32_STM32F407=y +# CONFIG_STM32_STM32F427 is not set +# CONFIG_STM32_STM32F429 is not set +# CONFIG_STM32_STM32F446 is not set +# CONFIG_STM32_STM32F469 is not set +# CONFIG_STM32_DFU is not set + +# +# STM32 Peripheral Support +# +CONFIG_STM32_HAVE_CCM=y +# CONFIG_STM32_HAVE_USBDEV is not set +CONFIG_STM32_HAVE_OTGFS=y +CONFIG_STM32_HAVE_FSMC=y +# CONFIG_STM32_HAVE_HRTIM1 is not set +# CONFIG_STM32_HAVE_LTDC is not set +CONFIG_STM32_HAVE_USART3=y +CONFIG_STM32_HAVE_UART4=y +CONFIG_STM32_HAVE_UART5=y +CONFIG_STM32_HAVE_USART6=y +# CONFIG_STM32_HAVE_UART7 is not set +# CONFIG_STM32_HAVE_UART8 is not set +CONFIG_STM32_HAVE_TIM1=y +CONFIG_STM32_HAVE_TIM2=y +CONFIG_STM32_HAVE_TIM3=y +CONFIG_STM32_HAVE_TIM4=y +CONFIG_STM32_HAVE_TIM5=y +CONFIG_STM32_HAVE_TIM6=y +CONFIG_STM32_HAVE_TIM7=y +CONFIG_STM32_HAVE_TIM8=y +CONFIG_STM32_HAVE_TIM9=y +CONFIG_STM32_HAVE_TIM10=y +CONFIG_STM32_HAVE_TIM11=y +CONFIG_STM32_HAVE_TIM12=y +CONFIG_STM32_HAVE_TIM13=y +CONFIG_STM32_HAVE_TIM14=y +# CONFIG_STM32_HAVE_TIM15 is not set +# CONFIG_STM32_HAVE_TIM16 is not set +# CONFIG_STM32_HAVE_TIM17 is not set +CONFIG_STM32_HAVE_ADC2=y +CONFIG_STM32_HAVE_ADC3=y +# CONFIG_STM32_HAVE_ADC4 is not set +# CONFIG_STM32_HAVE_ADC1_DMA is not set +# CONFIG_STM32_HAVE_ADC2_DMA is not set +# CONFIG_STM32_HAVE_ADC3_DMA is not set +# CONFIG_STM32_HAVE_ADC4_DMA is not set +# CONFIG_STM32_HAVE_SDADC1 is not set +# CONFIG_STM32_HAVE_SDADC2 is not set +# CONFIG_STM32_HAVE_SDADC3 is not set +# CONFIG_STM32_HAVE_SDADC1_DMA is not set +# CONFIG_STM32_HAVE_SDADC2_DMA is not set +# CONFIG_STM32_HAVE_SDADC3_DMA is not set +CONFIG_STM32_HAVE_CAN1=y +CONFIG_STM32_HAVE_CAN2=y +# CONFIG_STM32_HAVE_COMP1 is not set +# CONFIG_STM32_HAVE_COMP2 is not set +# CONFIG_STM32_HAVE_COMP3 is not set +# CONFIG_STM32_HAVE_COMP4 is not set +# CONFIG_STM32_HAVE_COMP5 is not set +# CONFIG_STM32_HAVE_COMP6 is not set +# CONFIG_STM32_HAVE_COMP7 is not set +CONFIG_STM32_HAVE_DAC1=y +CONFIG_STM32_HAVE_DAC2=y +CONFIG_STM32_HAVE_RNG=y +CONFIG_STM32_HAVE_ETHMAC=y +CONFIG_STM32_HAVE_I2C2=y +CONFIG_STM32_HAVE_I2C3=y +CONFIG_STM32_HAVE_SPI2=y +CONFIG_STM32_HAVE_SPI3=y +# CONFIG_STM32_HAVE_SPI4 is not set +# CONFIG_STM32_HAVE_SPI5 is not set +# CONFIG_STM32_HAVE_SPI6 is not set +# CONFIG_STM32_HAVE_SAIPLL is not set +# CONFIG_STM32_HAVE_I2SPLL is not set +# CONFIG_STM32_HAVE_OPAMP1 is not set +# CONFIG_STM32_HAVE_OPAMP2 is not set +# CONFIG_STM32_HAVE_OPAMP3 is not set +# CONFIG_STM32_HAVE_OPAMP4 is not set +# CONFIG_STM32_ADC1 is not set +# CONFIG_STM32_ADC2 is not set +# CONFIG_STM32_ADC3 is not set +# CONFIG_STM32_BKPSRAM is not set +# CONFIG_STM32_CAN1 is not set +# CONFIG_STM32_CAN2 is not set +# CONFIG_STM32_CCMDATARAM is not set +# CONFIG_STM32_CRC is not set +# CONFIG_STM32_CRYP is not set +# CONFIG_STM32_DMA1 is not set +# CONFIG_STM32_DMA2 is not set +# CONFIG_STM32_DAC1 is not set +# CONFIG_STM32_DAC2 is not set +# CONFIG_STM32_DCMI is not set +# CONFIG_STM32_ETHMAC is not set +# CONFIG_STM32_FSMC is not set +# CONFIG_STM32_HASH is not set +# CONFIG_STM32_I2C1 is not set +# CONFIG_STM32_I2C2 is not set +# CONFIG_STM32_I2C3 is not set +# CONFIG_STM32_OPAMP is not set +# CONFIG_STM32_OTGFS is not set +# CONFIG_STM32_OTGHS is not set +CONFIG_STM32_PWR=y +# CONFIG_STM32_RNG is not set +# CONFIG_STM32_SDIO is not set +# CONFIG_STM32_SPI1 is not set +# CONFIG_STM32_SPI2 is not set +# CONFIG_STM32_SPI3 is not set +CONFIG_STM32_SYSCFG=y +# CONFIG_STM32_TIM1 is not set +# CONFIG_STM32_TIM2 is not set +# CONFIG_STM32_TIM3 is not set +# CONFIG_STM32_TIM4 is not set +# CONFIG_STM32_TIM5 is not set +# CONFIG_STM32_TIM6 is not set +# CONFIG_STM32_TIM7 is not set +# CONFIG_STM32_TIM8 is not set +# CONFIG_STM32_TIM9 is not set +# CONFIG_STM32_TIM10 is not set +# CONFIG_STM32_TIM11 is not set +# CONFIG_STM32_TIM12 is not set +# CONFIG_STM32_TIM13 is not set +# CONFIG_STM32_TIM14 is not set +# CONFIG_STM32_USART1 is not set +# CONFIG_STM32_USART2 is not set +CONFIG_STM32_USART3=y +# CONFIG_STM32_UART4 is not set +# CONFIG_STM32_UART5 is not set +# CONFIG_STM32_USART6 is not set +# CONFIG_STM32_IWDG is not set +# CONFIG_STM32_WWDG is not set +# CONFIG_STM32_NOEXT_VECTORS is not set + +# +# Alternate Pin Mapping +# +# CONFIG_STM32_FLASH_PREFETCH is not set +# CONFIG_STM32_FLASH_WORKAROUND_DATA_CACHE_CORRUPTION_ON_RWW is not set +# CONFIG_STM32_JTAG_DISABLE is not set +# CONFIG_STM32_JTAG_FULL_ENABLE is not set +# CONFIG_STM32_JTAG_NOJNTRST_ENABLE is not set +CONFIG_STM32_JTAG_SW_ENABLE=y +CONFIG_STM32_DISABLE_IDLE_SLEEP_DURING_DEBUG=y +# CONFIG_STM32_FORCEPOWER is not set +# CONFIG_ARCH_BOARD_STM32_CUSTOM_CLOCKCONFIG is not set +CONFIG_STM32_CCMEXCLUDE=y + +# +# Timer Configuration +# +# CONFIG_STM32_ONESHOT is not set +# CONFIG_STM32_FREERUN is not set +# CONFIG_STM32_TIM1_CAP is not set +# CONFIG_STM32_TIM2_CAP is not set +# CONFIG_STM32_TIM3_CAP is not set +# CONFIG_STM32_TIM4_CAP is not set +# CONFIG_STM32_TIM5_CAP is not set +# CONFIG_STM32_TIM8_CAP is not set +# CONFIG_STM32_TIM9_CAP is not set +# CONFIG_STM32_TIM10_CAP is not set +# CONFIG_STM32_TIM11_CAP is not set +# CONFIG_STM32_TIM12_CAP is not set +# CONFIG_STM32_TIM13_CAP is not set +# CONFIG_STM32_TIM14_CAP is not set +CONFIG_STM32_USART=y +CONFIG_STM32_SERIALDRIVER=y + +# +# U[S]ART Configuration +# + +# +# U[S]ART Device Configuration +# +CONFIG_STM32_USART3_SERIALDRIVER=y +# CONFIG_STM32_USART3_1WIREDRIVER is not set +# CONFIG_USART3_RS485 is not set + +# +# Serial Driver Configuration +# +# CONFIG_SERIAL_DISABLE_REORDERING is not set +# CONFIG_STM32_FLOWCONTROL_BROKEN is not set +# CONFIG_STM32_USART_BREAKS is not set +# CONFIG_STM32_USART_SINGLEWIRE is not set +# CONFIG_STM32_HAVE_RTC_COUNTER is not set +# CONFIG_STM32_HAVE_RTC_SUBSECONDS is not set + +# +# USB FS Host Configuration +# + +# +# USB HS Host Configuration +# + +# +# USB Host Debug Configuration +# + +# +# USB Device Configuration +# + +# +# Architecture Options +# +# CONFIG_ARCH_NOINTC is not set +# CONFIG_ARCH_VECNOTIRQ is not set +# CONFIG_ARCH_DMA is not set +CONFIG_ARCH_HAVE_IRQPRIO=y +# CONFIG_ARCH_L2CACHE is not set +# CONFIG_ARCH_HAVE_COHERENT_DCACHE is not set +# CONFIG_ARCH_HAVE_ADDRENV is not set +# CONFIG_ARCH_NEED_ADDRENV_MAPPING is not set +# CONFIG_ARCH_HAVE_MULTICPU is not set +CONFIG_ARCH_HAVE_VFORK=y +# CONFIG_ARCH_HAVE_MMU is not set +CONFIG_ARCH_HAVE_MPU=y +# CONFIG_ARCH_NAND_HWECC is not set +# CONFIG_ARCH_HAVE_EXTCLK is not set +# CONFIG_ARCH_HAVE_POWEROFF is not set +CONFIG_ARCH_HAVE_RESET=y +# CONFIG_ARCH_HAVE_RTC_SUBSECONDS is not set +CONFIG_ARCH_USE_MPU=y +# CONFIG_ARCH_IRQPRIO is not set +CONFIG_ARCH_STACKDUMP=y +# CONFIG_ENDIAN_BIG is not set +# CONFIG_ARCH_IDLE_CUSTOM is not set +# CONFIG_ARCH_HAVE_RAMFUNCS is not set +CONFIG_ARCH_HAVE_RAMVECTORS=y +# CONFIG_ARCH_RAMVECTORS is not set +# CONFIG_ARCH_MINIMAL_VECTORTABLE is not set + +# +# Board Settings +# +CONFIG_BOARD_LOOPSPERMSEC=16717 +# CONFIG_ARCH_CALIBRATION is not set + +# +# Interrupt options +# +CONFIG_ARCH_HAVE_INTERRUPTSTACK=y +CONFIG_ARCH_INTERRUPTSTACK=0 +CONFIG_ARCH_HAVE_HIPRI_INTERRUPT=y +# CONFIG_ARCH_HIPRI_INTERRUPT is not set + +# +# Boot options +# +# CONFIG_BOOT_RUNFROMEXTSRAM is not set +CONFIG_BOOT_RUNFROMFLASH=y +# CONFIG_BOOT_RUNFROMISRAM is not set +# CONFIG_BOOT_RUNFROMSDRAM is not set +# CONFIG_BOOT_COPYTORAM is not set + +# +# Boot Memory Configuration +# +CONFIG_RAM_START=0x20000000 +CONFIG_RAM_SIZE=131072 +# CONFIG_ARCH_HAVE_SDRAM is not set + +# +# Board Selection +# +CONFIG_ARCH_BOARD_CLICKER2_STM32=y +# CONFIG_ARCH_BOARD_STM32F4_DISCOVERY is not set +# CONFIG_ARCH_BOARD_MIKROE_STM32F4 is not set +# CONFIG_ARCH_BOARD_CUSTOM is not set +CONFIG_ARCH_BOARD="clicker2-stm32" + +# +# Common Board Options +# +CONFIG_ARCH_HAVE_LEDS=y +CONFIG_ARCH_LEDS=y +CONFIG_ARCH_HAVE_BUTTONS=y +CONFIG_ARCH_BUTTONS=y +CONFIG_ARCH_HAVE_IRQBUTTONS=y +CONFIG_ARCH_IRQBUTTONS=y + +# +# Board-Specific Options +# +# CONFIG_CLICKER2_STM32_MB1_SPI is not set +# CONFIG_CLICKER2_STM32_MB2_SPI is not set +# CONFIG_BOARD_CRASHDUMP is not set +CONFIG_LIB_BOARDCTL=y +# CONFIG_BOARDCTL_RESET is not set +# CONFIG_BOARDCTL_UNIQUEID is not set +# CONFIG_BOARDCTL_TSCTEST is not set +# CONFIG_BOARDCTL_GRAPHICS is not set +# CONFIG_BOARDCTL_IOCTL is not set + +# +# RTOS Features +# +CONFIG_DISABLE_OS_API=y +# CONFIG_DISABLE_POSIX_TIMERS is not set +# CONFIG_DISABLE_PTHREAD is not set +# CONFIG_DISABLE_SIGNALS is not set +# CONFIG_DISABLE_MQUEUE is not set +# CONFIG_DISABLE_ENVIRON is not set + +# +# Clocks and Timers +# +CONFIG_ARCH_HAVE_TICKLESS=y +# CONFIG_SCHED_TICKLESS is not set +CONFIG_USEC_PER_TICK=10000 +# CONFIG_SYSTEM_TIME64 is not set +# CONFIG_CLOCK_MONOTONIC is not set +CONFIG_ARCH_HAVE_TIMEKEEPING=y +# CONFIG_JULIAN_TIME is not set +CONFIG_START_YEAR=2017 +CONFIG_START_MONTH=3 +CONFIG_START_DAY=25 +CONFIG_MAX_WDOGPARMS=2 +CONFIG_PREALLOC_WDOGS=8 +CONFIG_WDOG_INTRESERVE=1 +CONFIG_PREALLOC_TIMERS=4 + +# +# Tasks and Scheduling +# +# CONFIG_SPINLOCK is not set +# CONFIG_INIT_NONE is not set +CONFIG_INIT_ENTRYPOINT=y +# CONFIG_INIT_FILEPATH is not set +CONFIG_USER_ENTRYPOINT="nsh_main" +CONFIG_RR_INTERVAL=200 +# CONFIG_SCHED_SPORADIC is not set +CONFIG_TASK_NAME_SIZE=32 +CONFIG_MAX_TASKS=16 +# CONFIG_SCHED_HAVE_PARENT is not set +CONFIG_SCHED_WAITPID=y + +# +# Pthread Options +# +# CONFIG_PTHREAD_MUTEX_TYPES is not set +CONFIG_PTHREAD_MUTEX_ROBUST=y +# CONFIG_PTHREAD_MUTEX_UNSAFE is not set +# CONFIG_PTHREAD_MUTEX_BOTH is not set +CONFIG_NPTHREAD_KEYS=4 +# CONFIG_PTHREAD_CLEANUP is not set +# CONFIG_CANCELLATION_POINTS is not set + +# +# Performance Monitoring +# +# CONFIG_SCHED_CPULOAD is not set +# CONFIG_SCHED_INSTRUMENTATION is not set + +# +# Files and I/O +# +CONFIG_DEV_CONSOLE=y +# CONFIG_FDCLONE_DISABLE is not set +# CONFIG_FDCLONE_STDIO is not set +CONFIG_SDCLONE_DISABLE=y +CONFIG_NFILE_DESCRIPTORS=8 +CONFIG_NFILE_STREAMS=8 +CONFIG_NAME_MAX=32 +# CONFIG_PRIORITY_INHERITANCE is not set + +# +# RTOS hooks +# +CONFIG_BOARD_INITIALIZE=y +# CONFIG_BOARD_INITTHREAD is not set +# CONFIG_SCHED_STARTHOOK is not set +# CONFIG_SCHED_ATEXIT is not set +# CONFIG_SCHED_ONEXIT is not set + +# +# Signal Numbers +# +CONFIG_SIG_SIGUSR1=1 +CONFIG_SIG_SIGUSR2=2 +CONFIG_SIG_SIGALARM=3 +CONFIG_SIG_SIGCONDTIMEDOUT=16 +CONFIG_SIG_SIGWORK=17 + +# +# POSIX Message Queue Options +# +CONFIG_PREALLOC_MQ_MSGS=4 +CONFIG_MQ_MAXMSGSIZE=32 +# CONFIG_MODULE is not set + +# +# Work queue support +# +CONFIG_SCHED_WORKQUEUE=y +CONFIG_SCHED_HPWORK=y +CONFIG_SCHED_HPWORKPRIORITY=192 +CONFIG_SCHED_HPWORKPERIOD=50000 +CONFIG_SCHED_HPWORKSTACKSIZE=2048 +# CONFIG_SCHED_LPWORK is not set + +# +# Stack and heap information +# +CONFIG_IDLETHREAD_STACKSIZE=1024 +CONFIG_USERMAIN_STACKSIZE=2048 +CONFIG_PTHREAD_STACK_MIN=256 +CONFIG_PTHREAD_STACK_DEFAULT=2048 +CONFIG_LIB_SYSCALL=y +CONFIG_SYS_RESERVED=8 +CONFIG_SYS_NNEST=2 + +# +# Device Drivers +# +CONFIG_DISABLE_POLL=y +CONFIG_DEV_NULL=y +# CONFIG_DEV_ZERO is not set +# CONFIG_DEV_URANDOM is not set +# CONFIG_DEV_LOOP is not set + +# +# Buffering +# + +# +# Common I/O Buffer Support +# +# CONFIG_DRIVERS_IOB is not set +# CONFIG_DRVR_WRITEBUFFER is not set +# CONFIG_DRVR_READAHEAD is not set +# CONFIG_RAMDISK is not set +# CONFIG_CAN is not set +# CONFIG_ARCH_HAVE_PWM_PULSECOUNT is not set +# CONFIG_ARCH_HAVE_PWM_MULTICHAN is not set +# CONFIG_PWM is not set +CONFIG_ARCH_HAVE_I2CRESET=y +# CONFIG_I2C is not set +# CONFIG_ARCH_HAVE_SPI_CRCGENERATION is not set +# CONFIG_ARCH_HAVE_SPI_CS_CONTROL is not set +CONFIG_ARCH_HAVE_SPI_BITORDER=y +# CONFIG_SPI is not set +# CONFIG_I2S is not set + +# +# Timer Driver Support +# +# CONFIG_TIMER is not set +# CONFIG_ONESHOT is not set +# CONFIG_RTC is not set +# CONFIG_WATCHDOG is not set +# CONFIG_ANALOG is not set +# CONFIG_AUDIO_DEVICES is not set +# CONFIG_VIDEO_DEVICES is not set +# CONFIG_BCH is not set +# CONFIG_INPUT is not set + +# +# IO Expander/GPIO Support +# +# CONFIG_IOEXPANDER is not set +# CONFIG_DEV_GPIO is not set + +# +# LCD Driver Support +# +# CONFIG_LCD is not set +# CONFIG_SLCD is not set + +# +# LED Support +# +# CONFIG_USERLED is not set +# CONFIG_RGBLED is not set +# CONFIG_PCA9635PW is not set +# CONFIG_NCP5623C is not set +# CONFIG_MMCSD is not set +# CONFIG_MODEM is not set +# CONFIG_MTD is not set +# CONFIG_EEPROM is not set +# CONFIG_PIPES is not set +# CONFIG_PM is not set +# CONFIG_POWER is not set +# CONFIG_SENSORS is not set +CONFIG_SERIAL=y +# CONFIG_DEV_LOWCONSOLE is not set +# CONFIG_SERIAL_REMOVABLE is not set +CONFIG_SERIAL_CONSOLE=y +# CONFIG_16550_UART is not set +# CONFIG_UART_SERIALDRIVER is not set +# CONFIG_UART0_SERIALDRIVER is not set +# CONFIG_UART1_SERIALDRIVER is not set +# CONFIG_UART2_SERIALDRIVER is not set +# CONFIG_UART3_SERIALDRIVER is not set +# CONFIG_UART4_SERIALDRIVER is not set +# CONFIG_UART5_SERIALDRIVER is not set +# CONFIG_UART6_SERIALDRIVER is not set +# CONFIG_UART7_SERIALDRIVER is not set +# CONFIG_UART8_SERIALDRIVER is not set +# CONFIG_SCI0_SERIALDRIVER is not set +# CONFIG_SCI1_SERIALDRIVER is not set +# CONFIG_USART0_SERIALDRIVER is not set +# CONFIG_USART1_SERIALDRIVER is not set +# CONFIG_USART2_SERIALDRIVER is not set +CONFIG_USART3_SERIALDRIVER=y +# CONFIG_USART4_SERIALDRIVER is not set +# CONFIG_USART5_SERIALDRIVER is not set +# CONFIG_USART6_SERIALDRIVER is not set +# CONFIG_USART7_SERIALDRIVER is not set +# CONFIG_USART8_SERIALDRIVER is not set +# CONFIG_OTHER_UART_SERIALDRIVER is not set +CONFIG_MCU_SERIAL=y +CONFIG_STANDARD_SERIAL=y +# CONFIG_SERIAL_IFLOWCONTROL is not set +# CONFIG_SERIAL_OFLOWCONTROL is not set +# CONFIG_SERIAL_DMA is not set +CONFIG_ARCH_HAVE_SERIAL_TERMIOS=y +CONFIG_USART3_SERIAL_CONSOLE=y +# CONFIG_OTHER_SERIAL_CONSOLE is not set +# CONFIG_NO_SERIAL_CONSOLE is not set + +# +# USART3 Configuration +# +CONFIG_USART3_RXBUFSIZE=256 +CONFIG_USART3_TXBUFSIZE=256 +CONFIG_USART3_BAUD=115200 +CONFIG_USART3_BITS=8 +CONFIG_USART3_PARITY=0 +CONFIG_USART3_2STOP=0 +# CONFIG_USART3_IFLOWCONTROL is not set +# CONFIG_USART3_OFLOWCONTROL is not set +# CONFIG_USART3_DMA is not set +# CONFIG_PSEUDOTERM is not set +# CONFIG_USBDEV is not set +# CONFIG_USBHOST is not set +# CONFIG_USBMISC is not set +# CONFIG_HAVE_USBTRACE is not set +# CONFIG_DRIVERS_WIRELESS is not set +# CONFIG_DRIVERS_CONTACTLESS is not set + +# +# System Logging +# +# CONFIG_ARCH_SYSLOG is not set +# CONFIG_RAMLOG is not set +# CONFIG_SYSLOG_INTBUFFER is not set +# CONFIG_SYSLOG_TIMESTAMP is not set +CONFIG_SYSLOG_SERIAL_CONSOLE=y +# CONFIG_SYSLOG_CHAR is not set +CONFIG_SYSLOG_CONSOLE=y +# CONFIG_SYSLOG_NONE is not set +# CONFIG_SYSLOG_FILE is not set +# CONFIG_SYSLOG_CHARDEV is not set + +# +# Networking Support +# +# CONFIG_ARCH_HAVE_NET is not set +# CONFIG_ARCH_HAVE_PHY is not set +# CONFIG_NET is not set + +# +# Crypto API +# +# CONFIG_CRYPTO is not set + +# +# File Systems +# + +# +# File system configuration +# +# CONFIG_DISABLE_MOUNTPOINT is not set +# CONFIG_FS_AUTOMOUNTER is not set +# CONFIG_DISABLE_PSEUDOFS_OPERATIONS is not set +# CONFIG_PSEUDOFS_SOFTLINKS is not set +CONFIG_FS_READABLE=y +CONFIG_FS_WRITABLE=y +# CONFIG_FS_NAMED_SEMAPHORES is not set +CONFIG_FS_MQUEUE_MPATH="/var/mqueue" +# CONFIG_FS_RAMMAP is not set +# CONFIG_FS_FAT is not set +# CONFIG_FS_NXFFS is not set +# CONFIG_FS_ROMFS is not set +# CONFIG_FS_TMPFS is not set +# CONFIG_FS_SMARTFS is not set +CONFIG_FS_PROCFS=y +# CONFIG_FS_PROCFS_REGISTER is not set + +# +# Exclude individual procfs entries +# +# CONFIG_FS_PROCFS_EXCLUDE_PROCESS is not set +# CONFIG_FS_PROCFS_EXCLUDE_UPTIME is not set +# CONFIG_FS_PROCFS_EXCLUDE_KMM is not set +# CONFIG_FS_PROCFS_EXCLUDE_MOUNTS is not set +# CONFIG_FS_UNIONFS is not set + +# +# Graphics Support +# +# CONFIG_NX is not set + +# +# Memory Management +# +CONFIG_MM_KERNEL_HEAP=y +CONFIG_MM_KERNEL_HEAPSIZE=8192 +# CONFIG_MM_SMALL is not set +CONFIG_MM_REGIONS=1 +# CONFIG_ARCH_HAVE_HEAP2 is not set +# CONFIG_GRAN is not set + +# +# Audio Support +# +# CONFIG_AUDIO is not set + +# +# Wireless Support +# + +# +# Binary Loader +# +# CONFIG_BINFMT_DISABLE is not set +# CONFIG_BINFMT_EXEPATH is not set +# CONFIG_NXFLAT is not set +# CONFIG_ELF is not set +# CONFIG_PIC is not set +# CONFIG_SYMTAB_ORDEREDBYNAME is not set + +# +# Library Routines +# + +# +# Standard C Library Options +# + +# +# Standard C I/O +# +# CONFIG_STDIO_DISABLE_BUFFERING is not set +CONFIG_STDIO_BUFFER_SIZE=64 +CONFIG_STDIO_LINEBUFFER=y +CONFIG_NUNGET_CHARS=2 +# CONFIG_NOPRINTF_FIELDWIDTH is not set +# CONFIG_LIBC_FLOATINGPOINT is not set +CONFIG_LIBC_LONG_LONG=y +# CONFIG_LIBC_SCANSET is not set +# CONFIG_EOL_IS_CR is not set +# CONFIG_EOL_IS_LF is not set +# CONFIG_EOL_IS_BOTH_CRLF is not set +CONFIG_EOL_IS_EITHER_CRLF=y +# CONFIG_MEMCPY_VIK is not set +# CONFIG_LIBM is not set + +# +# Architecture-Specific Support +# +CONFIG_ARCH_LOWPUTC=y +# CONFIG_ARCH_ROMGETC is not set +# CONFIG_LIBC_ARCH_MEMCPY is not set +# CONFIG_LIBC_ARCH_MEMCMP is not set +# CONFIG_LIBC_ARCH_MEMMOVE is not set +# CONFIG_LIBC_ARCH_MEMSET is not set +# CONFIG_LIBC_ARCH_STRCHR is not set +# CONFIG_LIBC_ARCH_STRCMP is not set +# CONFIG_LIBC_ARCH_STRCPY is not set +# CONFIG_LIBC_ARCH_STRNCPY is not set +# CONFIG_LIBC_ARCH_STRLEN is not set +# CONFIG_LIBC_ARCH_STRNLEN is not set +# CONFIG_LIBC_ARCH_ELF is not set +# CONFIG_ARMV7M_MEMCPY is not set + +# +# stdlib Options +# +CONFIG_LIB_RAND_ORDER=1 +CONFIG_LIB_HOMEDIR="/" +CONFIG_LIBC_TMPDIR="/tmp" +CONFIG_LIBC_MAX_TMPFILE=32 + +# +# Program Execution Options +# +# CONFIG_LIBC_EXECFUNCS is not set +CONFIG_POSIX_SPAWN_PROXY_STACKSIZE=1024 +CONFIG_TASK_SPAWN_DEFAULT_STACKSIZE=2048 + +# +# errno Decode Support +# +# CONFIG_LIBC_STRERROR is not set +# CONFIG_LIBC_PERROR_STDOUT is not set + +# +# memcpy/memset Options +# +# CONFIG_MEMSET_OPTSPEED is not set +# CONFIG_LIBC_DLLFCN is not set +# CONFIG_LIBC_MODLIB is not set +# CONFIG_LIBC_WCHAR is not set +# CONFIG_LIBC_LOCALE is not set + +# +# Time/Time Zone Support +# +# CONFIG_LIBC_LOCALTIME is not set +# CONFIG_TIME_EXTENDED is not set +CONFIG_ARCH_HAVE_TLS=y + +# +# Thread Local Storage (TLS) +# +# CONFIG_TLS is not set + +# +# Network-Related Options +# +# CONFIG_LIBC_IPv4_ADDRCONV is not set +# CONFIG_LIBC_IPv6_ADDRCONV is not set +# CONFIG_LIBC_NETDB is not set + +# +# NETDB Support +# +# CONFIG_NETDB_HOSTFILE is not set +# CONFIG_LIBC_IOCTL_VARIADIC is not set +CONFIG_LIB_SENDFILE_BUFSIZE=512 + +# +# Non-standard Library Support +# +# CONFIG_LIB_CRC64_FAST is not set +# CONFIG_LIB_KBDCODEC is not set +# CONFIG_LIB_SLCDCODEC is not set + +# +# User Work Queue Support +# +# CONFIG_LIB_USRWORK is not set +# CONFIG_LIB_HEX2BIN is not set + +# +# Basic CXX Support +# +# CONFIG_C99_BOOL8 is not set +CONFIG_HAVE_CXX=y +CONFIG_HAVE_CXXINITIALIZE=y +# CONFIG_CXX_NEWLONG is not set + +# +# LLVM C++ Library (libcxx) +# +# CONFIG_LIBCXX is not set + +# +# uClibc++ Standard C++ Library +# +# CONFIG_UCLIBCXX is not set + +# +# Application Configuration +# + +# +# CAN Utilities +# + +# +# Examples +# +# CONFIG_EXAMPLES_BUTTONS is not set +# CONFIG_EXAMPLES_CCTYPE is not set +# CONFIG_EXAMPLES_CHAT is not set +# CONFIG_EXAMPLES_CONFIGDATA is not set +# CONFIG_EXAMPLES_CXXTEST is not set +# CONFIG_EXAMPLES_DHCPD is not set +# CONFIG_EXAMPLES_ELF is not set +# CONFIG_EXAMPLES_FSTEST is not set +# CONFIG_EXAMPLES_FTPC is not set +# CONFIG_EXAMPLES_FTPD is not set +# CONFIG_EXAMPLES_HELLO is not set +# CONFIG_EXAMPLES_HELLOXX is not set +# CONFIG_EXAMPLES_HIDKBD is not set +# CONFIG_EXAMPLES_IGMP is not set +# CONFIG_EXAMPLES_JSON is not set +# CONFIG_EXAMPLES_KEYPADTEST is not set +# CONFIG_EXAMPLES_MEDIA is not set +# CONFIG_EXAMPLES_MM is not set +# CONFIG_EXAMPLES_MODBUS is not set +# CONFIG_EXAMPLES_MOUNT is not set +CONFIG_EXAMPLES_NSH=y +CONFIG_EXAMPLES_NSH_CXXINITIALIZE=y +# CONFIG_EXAMPLES_NULL is not set +# CONFIG_EXAMPLES_NX is not set +# CONFIG_EXAMPLES_NXFFS is not set +# CONFIG_EXAMPLES_NXHELLO is not set +# CONFIG_EXAMPLES_NXIMAGE is not set +# CONFIG_EXAMPLES_NXLINES is not set +# CONFIG_EXAMPLES_NXTERM is not set +# CONFIG_EXAMPLES_NXTEXT is not set +# CONFIG_EXAMPLES_OSTEST is not set +# CONFIG_EXAMPLES_PCA9635 is not set +# CONFIG_EXAMPLES_POSIXSPAWN is not set +# CONFIG_EXAMPLES_PPPD is not set +# CONFIG_EXAMPLES_RFID_READUID is not set +# CONFIG_EXAMPLES_RGBLED is not set +# CONFIG_EXAMPLES_SENDMAIL is not set +# CONFIG_EXAMPLES_SERIALBLASTER is not set +# CONFIG_EXAMPLES_SERIALRX is not set +# CONFIG_EXAMPLES_SERLOOP is not set +# CONFIG_EXAMPLES_SLCD is not set +# CONFIG_EXAMPLES_SMART is not set +# CONFIG_EXAMPLES_SMP is not set +# CONFIG_EXAMPLES_STAT is not set +# CONFIG_EXAMPLES_TCPECHO is not set +# CONFIG_EXAMPLES_TELNETD is not set +# CONFIG_EXAMPLES_TIFF is not set +# CONFIG_EXAMPLES_TOUCHSCREEN is not set +# CONFIG_EXAMPLES_USBSERIAL is not set +# CONFIG_EXAMPLES_WATCHDOG is not set +# CONFIG_EXAMPLES_WEBSERVER is not set +# CONFIG_EXAMPLES_XBC_TEST is not set + +# +# File System Utilities +# +# CONFIG_FSUTILS_INIFILE is not set +# CONFIG_FSUTILS_PASSWD is not set + +# +# GPS Utilities +# +# CONFIG_GPSUTILS_MINMEA_LIB is not set + +# +# Graphics Support +# +# CONFIG_TIFF is not set +# CONFIG_GRAPHICS_TRAVELER is not set + +# +# Interpreters +# +# CONFIG_INTERPRETERS_BAS is not set +# CONFIG_INTERPRETERS_FICL is not set +# CONFIG_INTERPRETERS_MICROPYTHON is not set +# CONFIG_INTERPRETERS_MINIBASIC is not set +# CONFIG_INTERPRETERS_PCODE is not set + +# +# FreeModBus +# +# CONFIG_MODBUS is not set + +# +# Network Utilities +# +# CONFIG_NETUTILS_CODECS is not set +# CONFIG_NETUTILS_ESP8266 is not set +# CONFIG_NETUTILS_FTPC is not set +# CONFIG_NETUTILS_JSON is not set +# CONFIG_NETUTILS_SMTP is not set + +# +# NSH Library +# +CONFIG_NSH_LIBRARY=y +# CONFIG_NSH_MOTD is not set + +# +# Command Line Configuration +# +CONFIG_NSH_READLINE=y +# CONFIG_NSH_CLE is not set +CONFIG_NSH_LINELEN=64 +# CONFIG_NSH_DISABLE_SEMICOLON is not set +CONFIG_NSH_CMDPARMS=y +CONFIG_NSH_MAXARGUMENTS=6 +CONFIG_NSH_ARGCAT=y +CONFIG_NSH_NESTDEPTH=3 +# CONFIG_NSH_DISABLEBG is not set + +# +# Disable Individual commands +# +# CONFIG_NSH_DISABLE_ADDROUTE is not set +# CONFIG_NSH_DISABLE_BASENAME is not set +# CONFIG_NSH_DISABLE_CAT is not set +# CONFIG_NSH_DISABLE_CD is not set +# CONFIG_NSH_DISABLE_CP is not set +# CONFIG_NSH_DISABLE_CMP is not set +CONFIG_NSH_DISABLE_DATE=y +CONFIG_NSH_DISABLE_DD=y +# CONFIG_NSH_DISABLE_DF is not set +# CONFIG_NSH_DISABLE_DELROUTE is not set +# CONFIG_NSH_DISABLE_DIRNAME is not set +# CONFIG_NSH_DISABLE_ECHO is not set +# CONFIG_NSH_DISABLE_EXEC is not set +# CONFIG_NSH_DISABLE_EXIT is not set +# CONFIG_NSH_DISABLE_FREE is not set +CONFIG_NSH_DISABLE_GET=y +# CONFIG_NSH_DISABLE_HELP is not set +# CONFIG_NSH_DISABLE_HEXDUMP is not set +# CONFIG_NSH_DISABLE_IFCONFIG is not set +CONFIG_NSH_DISABLE_IFUPDOWN=y +# CONFIG_NSH_DISABLE_KILL is not set +# CONFIG_NSH_DISABLE_LOSETUP is not set +CONFIG_NSH_DISABLE_LOSMART=y +# CONFIG_NSH_DISABLE_LS is not set +# CONFIG_NSH_DISABLE_MB is not set +# CONFIG_NSH_DISABLE_MKDIR is not set +CONFIG_NSH_DISABLE_MKRD=y +# CONFIG_NSH_DISABLE_MH is not set +# CONFIG_NSH_DISABLE_MOUNT is not set +# CONFIG_NSH_DISABLE_MV is not set +# CONFIG_NSH_DISABLE_MW is not set +CONFIG_NSH_DISABLE_PRINTF=y +# CONFIG_NSH_DISABLE_PS is not set +CONFIG_NSH_DISABLE_PUT=y +# CONFIG_NSH_DISABLE_PWD is not set +# CONFIG_NSH_DISABLE_RM is not set +# CONFIG_NSH_DISABLE_RMDIR is not set +# CONFIG_NSH_DISABLE_SET is not set +# CONFIG_NSH_DISABLE_SH is not set +# CONFIG_NSH_DISABLE_SLEEP is not set +# CONFIG_NSH_DISABLE_TIME is not set +# CONFIG_NSH_DISABLE_TEST is not set +# CONFIG_NSH_DISABLE_UMOUNT is not set +# CONFIG_NSH_DISABLE_UNAME is not set +# CONFIG_NSH_DISABLE_UNSET is not set +# CONFIG_NSH_DISABLE_USLEEP is not set +CONFIG_NSH_DISABLE_WGET=y +# CONFIG_NSH_DISABLE_XD is not set +CONFIG_NSH_MMCSDMINOR=0 + +# +# Configure Command Options +# +# CONFIG_NSH_CMDOPT_DF_H is not set +CONFIG_NSH_CODECS_BUFSIZE=128 +CONFIG_NSH_CMDOPT_HEXDUMP=y +CONFIG_NSH_PROC_MOUNTPOINT="/proc" +CONFIG_NSH_FILEIOSIZE=512 + +# +# Scripting Support +# +# CONFIG_NSH_DISABLESCRIPT is not set +# CONFIG_NSH_DISABLE_ITEF is not set +# CONFIG_NSH_DISABLE_LOOPS is not set + +# +# Console Configuration +# +CONFIG_NSH_CONSOLE=y +# CONFIG_NSH_ALTCONDEV is not set +# CONFIG_NSH_ARCHINIT is not set +# CONFIG_NSH_LOGIN is not set +# CONFIG_NSH_CONSOLE_LOGIN is not set + +# +# NxWidgets/NxWM +# + +# +# Platform-specific Support +# +# CONFIG_PLATFORM_CONFIGDATA is not set + +# +# System Libraries and NSH Add-Ons +# +# CONFIG_SYSTEM_CLE is not set +# CONFIG_SYSTEM_CUTERM is not set +# CONFIG_SYSTEM_FREE is not set +# CONFIG_SYSTEM_HEX2BIN is not set +# CONFIG_SYSTEM_HEXED is not set +# CONFIG_SYSTEM_INSTALL is not set +# CONFIG_SYSTEM_RAMTEST is not set +CONFIG_READLINE_HAVE_EXTMATCH=y +CONFIG_SYSTEM_READLINE=y +CONFIG_READLINE_ECHO=y +# CONFIG_READLINE_TABCOMPLETION is not set +# CONFIG_READLINE_CMD_HISTORY is not set +# CONFIG_SYSTEM_SUDOKU is not set +# CONFIG_SYSTEM_SYSTEM is not set +# CONFIG_SYSTEM_TEE is not set +# CONFIG_SYSTEM_UBLOXMODEM is not set +# CONFIG_SYSTEM_VI is not set +# CONFIG_SYSTEM_ZMODEM is not set + +# +# Wireless Libraries and NSH Add-Ons +# diff --git a/include/nuttx/wireless/ieee80211/ieee80211.h b/include/nuttx/wireless/ieee80211/ieee80211.h index 71cc273da8..b109487d0b 100644 --- a/include/nuttx/wireless/ieee80211/ieee80211.h +++ b/include/nuttx/wireless/ieee80211/ieee80211.h @@ -8,6 +8,7 @@ * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: + * * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright