Add suport for the Stellaris LM3S6432S2E and the TI RDK-S2E

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4260 42af7a65-404d-4744-a932-0658087f49c3
2012-01-04 22:27:35 +00:00 · 2012-01-04 22:27:35 +00:00 · f7d18c743e
commit f7d18c743e
parent c3bf42b97b
29 changed files with 3570 additions and 10 deletions
--- a/4
+++ b/4
@ -2341,4 +2341,6 @@
 	  something too wrong.
 	* drivers/can.c:  Fix a test for buffer full in the generic, "upper half",
 	  can driver.
-
+	* arch/arm/src/lm3s: Add support for the LM3S6432S2E (Contributed by Mike Smith)
+	* configs/lm3s6432-s2:  Add support for the TI RDK-S2E (LM3S6432S2E) board
+	  (Contributed by Mike Smith)
--- a/Documentation/NuttX.html
+++ b/Documentation/NuttX.html
@ -8,7 +8,7 @@
  <tr align="center" bgcolor="#e4e4e4">
    <td>
      <h1><big><font color="#3c34ec"><i>NuttX RTOS</i></font></big></h1>
-      <p>Last Updated: January 1, 2012</p>
+      <p>Last Updated: January 4, 2012</p>
    </td>
  </tr>
 </table>
@ -981,7 +981,7 @@
      <li><a href="#arm7tdmi">ARM7TDMI</b></a> (4)</li>
      <li><a href="#arm920t">ARM920T</a> (1) </li>
      <li><a href="#arm926ejs">ARM926EJS</a> (3) </li>
-      <li><a href="#armcortexm3">ARM Cortex-M3</a> (11)</li>
+      <li><a href="#armcortexm3">ARM Cortex-M3</a> (12)</li>
      <li><a href="#armcortexm4">ARM Cortex-M4</a> (4)</li>
    </ul>
  <li>Atmel AVR
@ -1281,7 +1281,7 @@
  <td><br></td>
  <td>
    <p>
-      <b>Luminary/TI LM3S6918</b>.
+      <b>Luminary/TI Stellaris LM3S6918</b>.
      This port uses the <a href=" http://www.micromint.com/">Micromint</a> Eagle-100 development
      board with a GNU arm-elf toolchain* under either Linux or Cygwin.
    </p>
@ -1312,7 +1312,7 @@
  <td><br></td>
  <td>
    <p>
-      <b>Luminary/TI LM3S6965</b>.
+      <b>Luminary/TI Stellaris LM3S6965</b>.
      This port uses the Stellaris LM3S6965 Ethernet Evalution Kit with a GNU arm-elf toolchain*
      under either Linux or Cygwin.
    </p>
@ -1346,7 +1346,7 @@
  <td><br></td>
  <td>
    <p>
-      <b>Luminary/TI LM3S8962</b>.
+      <b>Luminary/TI Stellaris LM3S8962</b>.
      This port uses the Stellaris EKC-LM3S8962 Ethernet+CAN Evalution Kit with a GNU arm-elf toolchain*
      under either Linux or Cygwin.
      Contributed by Larry Arnold.
@ -1368,7 +1368,7 @@
  <td><br></td>
  <td>
    <p>
-      <b>Luminary/TI LM3S9B96</b>.
+      <b>Luminary/TI Stellaris LM3S9B96</b>.
      Header file support was contributed by Tiago Maluta for this part.
      However, no complete board support configuration is available as of this writing.
    </p>
@ -1378,6 +1378,30 @@
  <td><br></td>
  <td><hr></td>
 </tr>
+<tr>
+  <td><br></td>
+  <td>
+    <p>
+      <b>TI Stellaris LM3S6432S2E</b>.
+      This port uses Serial-to-Ethernet Reference Design Kit (<a href="http://www.ti.com/tool/rdk-s2e">RDK-S2E</a>)
+      and has similar support as for the other Stellaris family members.
+      Configurations are available for the OS test and for the NuttShell (NSH)
+      (see the <a href="http://www.nuttx.org/NuttShell.html">NSH User Guide</a>).
+      The NSH configuration including networking support with a Telnet NSH console.
+      This port was contributed by Mike Smith.
+    </p>
+    <ul>
+      <p>
+        <b>STATUS:</b>
+          This port was will be released in NuttX 6.14. 
+      </p>
+     </ul>
+  </td>
+</tr>
+<tr>
+  <td><br></td>
+  <td><hr></td>
+</tr>
 <tr>
  <td><br></td>
  <td>
@ -2789,14 +2813,34 @@ nuttx-6.14 2012-xx-xx Gregory Nutt &lt;gnutt@nuttx.org&gt;
      on the Olimex LPC1766-STK board.
    * Makefile:  Added 'apps_clean' and 'apps_distclean' target to simplify
      managing the state of the application directory while in the NuttX directory
-    * Documentation/NuttXGettingStarted.html:  Added a "Getting Started" Guide
+    * Documentation/NuttXGettingStarted.html:  Added a &quot;Getting Started&quot; Guide
      for NuttX.  At present, this is just a stub and it refers to the NuttX
-      top-level README.txt file which is the only, real "Getting Started" Guide
+      top-level README.txt file which is the only, real &quot;Getting Started&quot; Guide
      that exists at the time being.
    * arch/arm/src/lpc17xx/lpc17_gpioint.c:  Correct an value used as the lower
      end of an IRQ number range test.
    * arch/arm/src/lpc17xx/lpc17_gpio.c:  Fix a integer flow problem in shift.
      This error would prevent pins &gt; 15 from being used as interrupt sources.
+    * arch/arm/src/stm32/stm32_can.c:  The CAN driver has been verified in
+      loopback mode on the STM3240G-EVAL board.
+    * configs/stm3240g-eval/src/up_adc.c: Complete coding of ADC support for the
+      potentiometer on board the STM3240G-EVAL.
+    * arch/arm/src/lpc17_can.c:  Several CAN driver improvements. Adds support for
+      testing in loopback mode.  now uses all three transmit buffers for better
+      performance.
+    * confgs/olimex-lpc1766stk/nsh:  Now supports the CAN loopback test as an
+      optional &quot;built-in&quot; application.
+    * sched/irq_attach.c:  Fix an issue with disabling interrupts when they are
+      detached.  For the PIC32, this can't be done because there is a 1-to-many
+      relationship between vector numbers and interrupt numbers or different.
+      Added a new configuration option CONFIG_ARCH_VECNOTIRQ to at least flag
+      the architectures that have this issue and to (at least) avoid doing
+      something too wrong.
+    * drivers/can.c:  Fix a test for buffer full in the generic, &quot;upper half&quot;,
+      can driver.
+    * arch/arm/src/lm3s: Add support for the LM3S6432S2E (Contributed by Mike Smith)
+    * configs/lm3s6432-s2:  Add support for the TI RDK-S2E (LM3S6432S2E) board
+      (Contributed by Mike Smith)

 apps-6.14 2012-xx-xx Gregory Nutt &lt;gnutt@nuttx.org&gt;

--- a/arch/arm/include/lm3s/irq.h
+++ b/arch/arm/include/lm3s/irq.h
@ -116,6 +116,41 @@
 #  define LM3S_IRQ_HIBERNATE (59) /* Vector 59: Hibernation Module */
                                  /* Vectors 60-70: Reserved */
 #  define NR_IRQS            (60) /* (Really less because of reserved vectors) */
+#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
+#  define LM3S_IRQ_GPIOA     (16) /* Vector 16: GPIO Port A */
+#  define LM3S_IRQ_GPIOB     (17) /* Vector 17: GPIO Port B */
+#  define LM3S_IRQ_GPIOC     (18) /* Vector 18: GPIO Port C */
+#  define LM3S_IRQ_GPIOD     (19) /* Vector 19: GPIO Port D */
+#  define LM3S_IRQ_GPIOE     (20) /* Vector 20: GPIO Port E */
+#  define LM3S_IRQ_UART0     (21) /* Vector 21: UART 0 */
+#  define LM3S_IRQ_UART1     (22) /* Vector 22: UART 1 */
+#  define LM3S_IRQ_SSI0      (23) /* Vector 23: SSI 0 */
+#  define LM3S_IRQ_I2C0      (24) /* Vector 24: I2C 0 */
+                                  /* Vector 25: Reserved */
+#  define LM3S_IRQ_PWM0      (26) /* Vector 26: PWM Generator 0 */
+                                  /* Vectors 27-29: Reserved */
+#  define LM3S_IRQ_ADC0      (30) /* Vector 30: ADC Sequence 0 */
+#  define LM3S_IRQ_ADC1      (31) /* Vector 31: ADC Sequence 1 */
+#  define LM3S_IRQ_ADC2      (32) /* Vector 32: ADC Sequence 2 */
+#  define LM3S_IRQ_ADC3      (33) /* Vector 33: ADC Sequence 3 */
+#  define LM3S_IRQ_WDOG      (34) /* Vector 34: Watchdog Timer */
+#  define LM3S_IRQ_TIMER0A   (35) /* Vector 35: Timer 0 A */
+#  define LM3S_IRQ_TIMER0B   (36) /* Vector 36: Timer 0 B */
+#  define LM3S_IRQ_TIMER1A   (37) /* Vector 37: Timer 1 A */
+#  define LM3S_IRQ_TIMER1B   (38) /* Vector 38: Timer 1 B */
+#  define LM3S_IRQ_TIMER2A   (39) /* Vector 39: Timer 2 A */
+#  define LM3S_IRQ_TIMER2B   (40) /* Vector 40: Timer 3 B */
+#  define LM3S_IRQ_COMPARE0  (41) /* Vector 41: Analog Comparator 0 */
+#  define LM3S_IRQ_COMPARE1  (42) /* Vector 42: Analog Comparator 1 */
+                                  /* Vector 43: Reserved */
+#  define LM3S_IRQ_SYSCON    (44) /* Vector 44: System Control */
+#  define LM3S_IRQ_FLASHCON  (45) /* Vector 45: FLASH Control */
+#  define LM3S_IRQ_GPIOF     (46) /* Vector 46: GPIO Port F */
+#  define LM3S_IRQ_GPIOG     (47) /* Vector 47: GPIO Port G */
+                                  /* Vectors 48-57: Reserved */
+#  define LM3S_IRQ_ETHCON    (58) /* Vector 58: Ethernet Controller */
+                                  /* Vectors 59-70: Reserved */
+#  define NR_IRQS            (60) /* (Really less because of reserved vectors) */
 #elif defined(CONFIG_ARCH_CHIP_LM3S6965)
 #  define LM3S_IRQ_GPIOA     (16) /* Vector 16: GPIO Port A */
 #  define LM3S_IRQ_GPIOB     (17) /* Vector 17: GPIO Port B */
--- a/arch/arm/src/lm3s/chip.h
+++ b/arch/arm/src/lm3s/chip.h
@ -59,6 +59,17 @@
 #  define LM2S_NPWM            0  /* No PWM generator modules */
 #  define LM3S_NQEI            0  /* No quadrature encoders */
 #  define LM3S_NPORTS          8  /* 8 Ports (GPIOA-H) 5-38 GPIOs */
+#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
+#  define LM3S_NTIMERS         3  /* Three general purpose timers */
+#  define LM3S_NETHCONTROLLERS 1  /* One Ethernet controller */
+#  undef  LM3S_ETHTS              /* No timestamp register */
+#  define LM3S_NSSI            1  /* One SSI module */
+#  define LM3S_NUARTS          2  /* Two UART modules */
+#  define LM3S_NI2C            1  /* Two I2C modules */
+#  define LM3S_NADC            1  /* One ADC module */
+#  define LM2S_NPWM            1  /* One PWM generator module */
+#  define LM3S_NQEI            0  /* No quadrature encoders */
+#  define LM3S_NPORTS          7  /* 7 Ports (GPIOA-G), 0-42 GPIOs */
 #elif defined(CONFIG_ARCH_CHIP_LM3S6965)
 #  define LM3S_NTIMERS         4  /* Four general purpose timers */
 #  define LM3S_NETHCONTROLLERS 1  /* One Ethernet controller */
--- a/arch/arm/src/lm3s/lm3s_ethernet.c
+++ b/arch/arm/src/lm3s/lm3s_ethernet.c
@ -367,6 +367,10 @@ static void lm3s_ethreset(struct lm3s_driver_s *priv)
  putreg32(regval, LM3S_SYSCON_SRCR2);
  nllvdbg("SRCR2: %08x\n", regval);

+  /* Wait just a bit, again.  If we touch the ethernet too soon, we may busfault. */
+
+  up_mdelay(2);
+
  /* Enable Port F for Ethernet LEDs: LED0=Bit 3; LED1=Bit 2 */

 #ifdef CONFIG_LM3S_ETHLEDS
--- a/arch/arm/src/lm3s/lm3s_internal.h
+++ b/arch/arm/src/lm3s/lm3s_internal.h
@ -192,6 +192,36 @@
 #  define GPIO_ETHPHY_LED1 (GPIO_FUNC_PFOUTPUT | GPIO_PORTF | 2) /* PF2: LED1 */
 #  define GPIO_ETHPHY_LED0 (GPIO_FUNC_PFOUTPUT | GPIO_PORTF | 3) /* PF3: LED0 */
 #  define GPIO_I2C1_SCL    (GPIO_FUNC_PFOUTPUT | GPIO_PORTG | 0) /* PG0: I2C1 clock (I2C1SCL) */
+#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
+#  define GPIO_UART0_RX    (GPIO_FUNC_PFINPUT  | GPIO_PORTA | 0) /* PA0: UART 0 receive (U0Rx) */
+#  define GPIO_UART0_TX    (GPIO_FUNC_PFOUTPUT | GPIO_PORTA | 1) /* PA1: UART 0 transmit (U0Tx) */
+#  define GPIO_SSI0_CLK    (GPIO_FUNC_PFIO     | GPIO_PORTA | 2) /* PA2: SSI0 clock (SSI0Clk) */
+#  define GPIO_SSI0_FSS    (GPIO_FUNC_PFIO     | GPIO_PORTA | 3) /* PA3: SSI0 frame (SSI0Fss) */
+#  define GPIO_SSI0_RX     (GPIO_FUNC_PFINPUT  | GPIO_PORTA | 4) /* PA4: SSI0 receive (SSI0Rx) */
+#  define GPIO_SSI0_TX     (GPIO_FUNC_PFOUTPUT | GPIO_PORTA | 5) /* PA5: SSI0 transmit (SSI0Tx) */
+#  define GPIO_I2C0_SCL    (GPIO_FUNC_PFOUTPUT | GPIO_PORTB | 2) /* PB2: I2C0 clock (I2C0SCL) */
+#  define GPIO_I2C0_SDA    (GPIO_FUNC_PFODIO   | GPIO_PORTB | 3) /* PB3: I2C0 data (I2C0SDA) */
+#  define GPIO_CMP0_NIN    (GPIO_FUNC_PFINPUT  | GPIO_PORTB | 4) /* PB4: Analog comparator 0 negative input (C0-) */
+#  define GPIO_CMP1_NIN    (GPIO_FUNC_PFINPUT  | GPIO_PORTB | 5) /* PB5: Analog comparator 1 negative input (C1-) */
+#  define GPIO_CMP0_PIN    (GPIO_FUNC_PFINPUT  | GPIO_PORTB | 6) /* PB6: Analog comparator 0 positive input (C0+) */
+#  define GPIO_JTAG_TRST   (GPIO_FUNC_PFINPUT  | GPIO_PORTB | 7) /* PB7: JTAG ~TRST */
+#  define GPIO_JTAG_TCK    (GPIO_FUNC_PFINPUT  | GPIO_PORTC | 0) /* PC0: JTAG/SWD CLK */
+#  define GPIO_JTAG_SWCLK  (GPIO_FUNC_PFINPUT  | GPIO_PORTC | 0) /* PC0: JTAG/SWD CLK */
+#  define GPIO_JTAG_TMS    (GPIO_FUNC_PFIO     | GPIO_PORTC | 1) /* PC1: JTAG TMS */
+#  define GPIO_JTAG_SWDIO  (GPIO_FUNC_PFIO     | GPIO_PORTC | 1) /* PC1: JTAG SWDIO */
+#  define GPIO_JTAG_TDI    (GPIO_FUNC_PFINPUT  | GPIO_PORTC | 2) /* PC2: JTAG TDI */
+#  define GPIO_JTAG_TDO    (GPIO_FUNC_PFOUTPUT | GPIO_PORTC | 3) /* PC3: JTAG TDO */
+#  define GPIO_JTAG_SWO    (GPIO_FUNC_PFOUTPUT | GPIO_PORTC | 3) /* PC3: JTAG SWO */
+#  define GPIO_CMP1_PIN    (GPIO_FUNC_PFINPUT  | GPIO_PORTC | 5) /* PC5: Analog comparator 1 positive input (C1+) */
+#  define GPIO_CMP0_OUT    (GPIO_FUNC_PFOUTPUT | GPIO_PORTC | 5) /* PC5: Analog comparator 0 output (C0o) */
+#  define GPIO_PWM0_0      (GPIO_FUNC_PFOUTPUT | GPIO_PORTD | 0) /* PD0: PWM Generator 0, PWM0 */
+#  define GPIO_PWM0_1      (GPIO_FUNC_PFOUTPUT | GPIO_PORTD | 1) /* PD1: PWM Generator 0, PWM1 */
+#  define GPIO_UART1_RX    (GPIO_FUNC_PFINPUT  | GPIO_PORTD | 2) /* PD2: UART 1 receive (U1Rx) */
+#  define GPIO_UART1_TX    (GPIO_FUNC_PFOUTPUT | GPIO_PORTD | 3) /* PD3: UART 1 transmit (U1Tx) */
+#  define GPIO_PWM_FAULT   (GPIO_FUNC_PFINPUT  | GPIO_PORTD | 6) /* PD6: PWM Fault */
+#  define GPIO_TMR1_CCP    (GPIO_FUNC_PFIO     | GPIO_PORTD | 7) /* PD7: Capture/Compare/TMR1 (CCP1) */
+#  define GPIO_ETHPHY_LED1 (GPIO_FUNC_PFOUTPUT | GPIO_PORTF | 2) /* PF2: LED1 */
+#  define GPIO_ETHPHY_LED0 (GPIO_FUNC_PFOUTPUT | GPIO_PORTF | 3) /* PF3: LED0 */
 #elif defined(CONFIG_ARCH_CHIP_LM3S6965)
 #  define GPIO_UART0_RX    (GPIO_FUNC_PFINPUT | GPIO_PORTA | 0)  /* PA0: UART 0 receive (U0Rx) */
 #  define GPIO_UART0_TX    (GPIO_FUNC_PFOUTPUT | GPIO_PORTA | 1) /* PA1: UART 0 transmit (U0Tx) */
--- a/arch/arm/src/lm3s/lm3s_memorymap.h
+++ b/arch/arm/src/lm3s/lm3s_memorymap.h
@ -48,7 +48,8 @@

 /* Memory map ***********************************************************************/
 
-#if defined(CONFIG_ARCH_CHIP_LM3S6918) || defined(CONFIG_ARCH_CHIP_LM3S6965) || defined(CONFIG_ARCH_CHIP_LM3S8962)
+#if defined(CONFIG_ARCH_CHIP_LM3S6918) || defined(CONFIG_ARCH_CHIP_LM3S6432) || \
+    defined(CONFIG_ARCH_CHIP_LM3S6965) || defined(CONFIG_ARCH_CHIP_LM3S8962)
 #  define LM3S_FLASH_BASE     0x00000000 /* -0x0003ffff: On-chip FLASH */
                                         /* -0x1fffffff: Reserved */
 #  define LM3S_SRAM_BASE      0x20000000 /* -0x2000ffff: Bit-banded on-chip SRAM */
@ -140,6 +141,46 @@
 #  define LM3S_FLASHCON_BASE  (LM3S_PERIPH_BASE + 0xfd000)  /* -0xfdfff: FLASH Control */
 #  define LM3S_SYSCON_BASE    (LM3S_PERIPH_BASE + 0xfe000)  /* -0xfefff: System Control */
                                                            /* -0x1ffffff: Reserved */
+#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
+/* FiRM Peripheral Base Addresses */
+
+#  define LM3S_WDOG_BASE      (LM3S_PERIPH_BASE + 0x00000) /* -0x00fff: Watchdog Timer */
+                                                           /* -0x03fff: Reserved */
+#  define LM3S_GPIOA_BASE     (LM3S_PERIPH_BASE + 0x04000) /* -0x04fff: GPIO Port A */
+#  define LM3S_GPIOB_BASE     (LM3S_PERIPH_BASE + 0x05000) /* -0x05fff: GPIO Port B */
+#  define LM3S_GPIOC_BASE     (LM3S_PERIPH_BASE + 0x06000) /* -0x06fff: GPIO Port C */
+#  define LM3S_GPIOD_BASE     (LM3S_PERIPH_BASE + 0x07000) /* -0x07fff: GPIO Port D */
+#  define LM3S_SSI0_BASE      (LM3S_PERIPH_BASE + 0x08000) /* -0x08fff: SSI0 */
+                                                           /* -0x0bfff: Reserved */
+#  define LM3S_UART0_BASE     (LM3S_PERIPH_BASE + 0x0c000) /* -0x0cfff: UART0 */
+#  define LM3S_UART1_BASE     (LM3S_PERIPH_BASE + 0x0d000) /* -0x0dfff: UART1 */
+                                                           /* -0x1ffff: Reserved */
+/* Peripheral Base Addresses */
+
+#  define LM3S_I2CM0_BASE     (LM3S_PERIPH_BASE + 0x20000)  /* -0x207ff: I2C Master 0 */
+#  define LM3S_I2CS0_BASE     (LM3S_PERIPH_BASE + 0x20800)  /* -0x20fff: I2C Slave 0 */
+                                                            /* -0x23fff: Reserved */
+#  define LM3S_GPIOE_BASE     (LM3S_PERIPH_BASE + 0x24000)  /* -0x24fff: GPIO Port E */
+#  define LM3S_GPIOF_BASE     (LM3S_PERIPH_BASE + 0x25000)  /* -0x25fff: GPIO Port F */
+#  define LM3S_GPIOG_BASE     (LM3S_PERIPH_BASE + 0x26000)  /* -0x26fff: GPIO Port G */
+                                                            /* -0x27fff: Reserved */
+#  define LM3S_PWM0_BASE      (LM3S_PERIPH_BASE + 0x28000)  /* -0x28fff: PWM */
+                                                            /* -0x2ffff: Reserved */
+#  define LM3S_TIMER0_BASE    (LM3S_PERIPH_BASE + 0x30000)  /* -0x30fff: Timer 0 */
+#  define LM3S_TIMER1_BASE    (LM3S_PERIPH_BASE + 0x31000)  /* -0x31fff: Timer 1 */
+#  define LM3S_TIMER2_BASE    (LM3S_PERIPH_BASE + 0x32000)  /* -0x32fff: Timer 2 */
+                                                            /* -0x37fff: Reserved */
+#  define LM3S_ADC_BASE       (LM3S_PERIPH_BASE + 0x38000)  /* -0x38fff: ADC */
+                                                            /* -0x3bfff: Reserved */
+#  define LM3S_COMPARE_BASE   (LM3S_PERIPH_BASE + 0x3c000)  /* -0x3cfff: Analog Comparators */
+                                                            /* -0x47fff: Reserved */
+#  define LM3S_ETHCON_BASE    (LM3S_PERIPH_BASE + 0x48000)  /* -0x48fff: Ethernet Controller */
+                                                            /* -0xfcfff: Reserved */
+#  define LM3S_HIBERNATE_BASE (LM3S_PERIPH_BASE + 0xfc000)  /* -0xfcfff: Ethernet Controller */
+#  define LM3S_FLASHCON_BASE  (LM3S_PERIPH_BASE + 0xfd000)  /* -0xfdfff: FLASH Control */
+#  define LM3S_SYSCON_BASE    (LM3S_PERIPH_BASE + 0xfe000)  /* -0xfefff: System Control */
+                                                            /* -0x1ffffff: Reserved */
+
 #elif defined(CONFIG_ARCH_CHIP_LM3S6965)
 /* FiRM Peripheral Base Addresses */

--- a/arch/arm/src/lm3s/lm3s_vectors.S
+++ b/arch/arm/src/lm3s/lm3s_vectors.S
@ -183,6 +183,62 @@ lm3s_vectors:
 	.word	lm3s_reserved		/* Vector 68: Reserved */
 	.word	lm3s_reserved		/* Vector 69: Reserved */
 	.word	lm3s_reserved		/* Vector 70: Reserved */
+#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
+	.word	lm3s_gpioa			/* Vector 16: GPIO Port A */
+	.word	lm3s_gpiob			/* Vector 17: GPIO Port B */
+	.word	lm3s_gpioc			/* Vector 18: GPIO Port C */
+	.word	lm3s_gpiod			/* Vector 19: GPIO Port D */
+	.word	lm3s_gpioe			/* Vector 20: GPIO Port E */
+	.word	lm3s_uart0			/* Vector 21: UART 0 */
+	.word	lm3s_uart1			/* Vector 22: UART 1 */
+	.word	lm3s_ssi0			/* Vector 23: SSI 0 */
+	.word	lm3s_i2c0			/* Vector 24: I2C 0 */
+	.word	lm3s_reserved		/* Vector 25: Reserved */
+	.word	lm3s_pwm0			/* Vector 26: PWM Generator 0 */
+	.word	lm3s_reserved		/* Vector 27: Reserved */
+	.word	lm3s_reserved		/* Vector 28: Reserved */
+	.word	lm3s_reserved		/* Vector 29: Reserved */
+	.word	lm3s_adc0			/* Vector 30: ADC Sequence 0 */
+	.word	lm3s_adc1			/* Vector 31: ADC Sequence 1 */
+	.word	lm3s_adc2			/* Vector 32: ADC Sequence 2 */
+	.word	lm3s_adc3			/* Vector 33: ADC Sequence 3 */
+	.word	lm3s_wdog			/* Vector 34: Watchdog Timer */
+	.word	lm3s_tmr0a			/* Vector 35: Timer 0 A */
+	.word	lm3s_tmr0b			/* Vector 36: Timer 0 B */
+	.word	lm3s_tmr1a			/* Vector 37: Timer 1 A */
+	.word	lm3s_tmr1b			/* Vector 38: Timer 1 B */
+	.word	lm3s_tmr2a			/* Vector 39: Timer 2 A */
+	.word	lm3s_tmr2b			/* Vector 40: Timer 3 B */
+	.word	lm3s_cmp0			/* Vector 41: Analog Comparator 0 */
+	.word	lm3s_cmp1			/* Vector 42: Analog Comparator 1 */
+	.word	lm3s_reserved		/* Vector 43: Reserved */
+	.word	lm3s_syscon			/* Vector 44: System Control */
+	.word	lm3s_flashcon		/* Vector 45: FLASH Control */
+	.word	lm3s_gpiof			/* Vector 46: GPIO Port F */
+	.word	lm3s_gpiog			/* Vector 47: GPIO Port G */
+	.word	lm3s_reserved		/* Vector 48: Reserved */
+	.word	lm3s_reserved		/* Vector 49: Reserved */
+	.word	lm3s_reserved		/* Vector 50: Reserved */
+	.word	lm3s_reserved		/* Vector 51: Reserved */
+	.word	lm3s_reserved		/* Vector 52: Reserved */
+	.word	lm3s_reserved		/* Vector 53: Reserved */
+	.word	lm3s_reserved		/* Vector 54: Reserved */
+	.word	lm3s_reserved		/* Vector 55: Reserved */
+	.word	lm3s_reserved		/* Vector 56: Reserved */
+	.word	lm3s_reserved		/* Vector 57: Reserved */
+ 	.word	lm3s_eth			/* Vector 58: Ethernet Controller */
+	.word	lm3s_reserved		/* Vector 59: Reserved */
+	.word	lm3s_reserved		/* Vector 60: Reserved */
+	.word	lm3s_reserved		/* Vector 61: Reserved */
+	.word	lm3s_reserved		/* Vector 62: Reserved */
+	.word	lm3s_reserved		/* Vector 63: Reserved */
+	.word	lm3s_reserved		/* Vector 64: Reserved */
+	.word	lm3s_reserved		/* Vector 65: Reserved */
+	.word	lm3s_reserved		/* Vector 66: Reserved */
+	.word	lm3s_reserved		/* Vector 67: Reserved */
+	.word	lm3s_reserved		/* Vector 68: Reserved */
+	.word	lm3s_reserved		/* Vector 69: Reserved */
+	.word	lm3s_reserved		/* Vector 70: Reserved */
 #elif defined(CONFIG_ARCH_CHIP_LM3S6965)
 	.word	lm3s_gpioa			/* Vector 16: GPIO Port A */
 	.word	lm3s_gpiob			/* Vector 17: GPIO Port B */
@ -410,6 +466,35 @@ handlers:
 	HANDLER	lm3s_i2c1, LM3S_IRQ_I2C1				/* Vector 53: I2C 1 */
 	HANDLER	lm3s_eth, LM3S_IRQ_ETHCON				/* Vector 58: Ethernet Controller */
 	HANDLER	lm3s_hib, LM3S_IRQ_HIBERNATE			/* Vector 59: Hibernation Module */
+#elif defined(CONFIG_ARCH_CHIP_LM3S6432)
+	HANDLER	lm3s_gpioa, LM3S_IRQ_GPIOA				/* Vector 16: GPIO Port A */
+	HANDLER	lm3s_gpiob, LM3S_IRQ_GPIOB				/* Vector 17: GPIO Port B */
+	HANDLER	lm3s_gpioc, LM3S_IRQ_GPIOC				/* Vector 18: GPIO Port C */
+	HANDLER	lm3s_gpiod, LM3S_IRQ_GPIOD				/* Vector 19: GPIO Port D */
+	HANDLER	lm3s_gpioe, LM3S_IRQ_GPIOE				/* Vector 20: GPIO Port E */
+	HANDLER	lm3s_uart0, LM3S_IRQ_UART0				/* Vector 21: UART 0 */
+	HANDLER	lm3s_uart1, LM3S_IRQ_UART1				/* Vector 22: UART 1 */
+	HANDLER	lm3s_ssi0, LM3S_IRQ_SSI0				/* Vector 23: SSI 0 */
+	HANDLER	lm3s_i2c0, LM3S_IRQ_I2C0				/* Vector 24: I2C 0 */
+	HANDLER	lm3s_pwm0, LM3S_IRQ_PWM0				/* Vector 26: PWM Generator 0 */
+	HANDLER	lm3s_adc0, LM3S_IRQ_ADC0				/* Vector 30: ADC Sequence 0 */
+	HANDLER	lm3s_adc1, LM3S_IRQ_ADC1				/* Vector 31: ADC Sequence 1 */
+	HANDLER	lm3s_adc2, LM3S_IRQ_ADC2				/* Vector 32: ADC Sequence 2 */
+	HANDLER	lm3s_adc3, LM3S_IRQ_ADC3				/* Vector 33: ADC Sequence 3 */
+	HANDLER	lm3s_wdog, LM3S_IRQ_WDOG				/* Vector 34: Watchdog Timer */
+	HANDLER	lm3s_tmr0a, LM3S_IRQ_TIMER0A			/* Vector 35: Timer 0 A */
+	HANDLER	lm3s_tmr0b, LM3S_IRQ_TIMER0B			/* Vector 36: Timer 0 B */
+	HANDLER	lm3s_tmr1a, LM3S_IRQ_TIMER1A			/* Vector 37: Timer 1 A */
+	HANDLER	lm3s_tmr1b, LM3S_IRQ_TIMER1B			/* Vector 38: Timer 1 B */
+	HANDLER	lm3s_tmr2a, LM3S_IRQ_TIMER2A			/* Vector 39: Timer 2 A */
+	HANDLER	lm3s_tmr2b, LM3S_IRQ_TIMER2B			/* Vector 40: Timer 3 B */
+	HANDLER	lm3s_cmp0, LM3S_IRQ_COMPARE0			/* Vector 41: Analog Comparator 0 */
+	HANDLER	lm3s_cmp1, LM3S_IRQ_COMPARE1			/* Vector 42: Analog Comparator 1 */
+	HANDLER	lm3s_syscon, LM3S_IRQ_SYSCON			/* Vector 44: System Control */
+	HANDLER	lm3s_flashcon, LM3S_IRQ_FLASHCON		/* Vector 45: FLASH Control */
+	HANDLER	lm3s_gpiof, LM3S_IRQ_GPIOF				/* Vector 46: GPIO Port F */
+	HANDLER	lm3s_gpiog, LM3S_IRQ_GPIOG				/* Vector 47: GPIO Port G */
+ 	HANDLER	lm3s_eth, LM3S_IRQ_ETHCON				/* Vector 58: Ethernet Controller */
 #elif defined(CONFIG_ARCH_CHIP_LM3S6965)
 	HANDLER	lm3s_gpioa, LM3S_IRQ_GPIOA				/* Vector 16: GPIO Port A */
 	HANDLER	lm3s_gpiob, LM3S_IRQ_GPIOB				/* Vector 17: GPIO Port B */
--- a/configs/lm3s6432-s2e/README.txt
+++ b/configs/lm3s6432-s2e/README.txt
@ -0,0 +1,385 @@
+README
+^^^^^^
+
+README for NuttX port to the Stellaris RDK-S2E Reference Design Kit and
+the MDL-S2E Ethernet to Serial module.
+
+Contents
+^^^^^^^^
+
+  Stellaris RDK-S2E Reference Design Kit
+  Development Environment
+  GNU Toolchain Options
+  IDEs
+  NuttX buildroot Toolchain
+  Stellaris MDL-S2E Reference Design Configuration Options
+  Configurations
+
+Stellaris RDK-S2E Reference Design Kit
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+The Stellaris RDK-S2E Reference Design Kit includes the following features:
+
+ o  MDL-S2E Ethernet to serial module
+ o  LM3S6432 in a 10 x 10 mm BGA package for reduced board size
+ o  10/100 Mbit Ethernet port
+ o  Auto MDI/MDIX cross-over correction
+ o  Traffic and link indicators Serial ports
+ o  UART ports include RTS/CTS for flow control
+ o  UART0 has RS232 levels, transceiver runs at up to 230.4 Kbaud
+ o  UART1 has CMOS/TTL levels, can run at 1.0 Mbaud
+
+Features of the LM3S6432 Microcontroller
+
+ o  32-bit RISC performance using ARM® Cortex™-M3 v7M architecture
+    - 50-MHz operation
+    - Hardware-division and single-cycle-multiplication
+    - Integrated Nested Vectored Interrupt Controller (NVIC)
+    - 42 interrupt channels with eight priority levels
+ o  96 KB single-cycle flash
+ o  32 KB single-cycle SRAM
+ o  Three general-purpose 32-bit timers
+ o  Integrated Ethernet MAC and PHY
+ o  Two fully programmable 16C550-type UARTs
+ o  Three 10-bit channels (inputs) when used as single-ended inputs
+ o  Two independent integrated analog comparators
+ o  One I2C module
+ o  One PWM generator block
+    – One 16-bit counter
+    – Two comparators
+    – Produces two independent PWM signals
+    – One dead-band generator
+ o  0 to 43 GPIOs, depending on user configuration
+ o  On-chip low drop-out (LDO) voltage regulator
+
+GPIO Usage
+
+PIN SIGNAL            Function
+--- ----------------- ---------------------------------------
+ L3 PA0/U0RX          UART0 receive
+ M3 PA1/U0TX          UART0 transmit
+E12 PB0/U0CTS         UART0 CTS
+D12 PB1/U0RTS         UART0 RTS
+ L5 PA4/SPIRX         SPI receive (pin hardwired to U1RX)
+ M5 PA5/SPITX         SPI transmit (pin hardwired to U1TX)
+ H2 PD2/U1RX          UART1 receive
+ H1 PD3/U1TX          UART1 transmit
+ L4 PA3/U1CTS/SPICLK  UART1 CTS or SPI clock
+ M4 PA2/U1RTS/SPISEL  UART1 RTS or SPI slave select
+J11 PF0/LED1          Ethernet LED1 (green)
+J12 PF1/LED0          Ethernet LED0 (yellow)
+C11 PB2               Transciever #INVALID
+C12 PB3               Transciever #ENABLE
+ A6 PB4               Transciever ON
+ B7 PB5               Transciever #OFF
+
+Development Environment
+^^^^^^^^^^^^^^^^^^^^^^^
+
+  Either Linux, Mac OS X or Cygwin on Windows can be used for the development 
+  environment.
+  The source has been built only using the GNU toolchain (see below).  Other
+  toolchains will likely cause problems. Testing was performed using GCC on
+  Mac OS X.
+
+GNU Toolchain Options
+^^^^^^^^^^^^^^^^^^^^^
+
+  The NuttX make system has been modified to support the following different
+  toolchain options.
+
+  1. The CodeSourcery GNU toolchain,
+  2. The devkitARM GNU toolchain,
+  3. The NuttX buildroot Toolchain (see below).
+
+  To use a specific toolchain, you simply need to add one of the following
+  configuration options to your .config (or defconfig) file:
+
+    CONFIG_LM3S_CODESOURCERYW=y   : CodeSourcery under Windows
+    CONFIG_LM3S_CODESOURCERYL=y   : CodeSourcery under Linux or on Mac OS X.
+    CONFIG_LM3S_DEVKITARM=y       : devkitARM under Windows
+    CONFIG_LM3S_BUILDROOT=y       : NuttX buildroot under Linux or Cygwin (default)
+
+  If you are not using CONFIG_LM3S_BUILDROOT, then you may also have to modify
+  the PATH in the setenv.h file if your make cannot find the tools.
+
+  NOTE: the CodeSourcery (for Windows) and devkitARM are Windows native toolchains.
+  The CodeSourcey (for Linux) and NuttX buildroot toolchains are Cygwin and/or Linux
+  native toolchains. There are several limitations to using a Windows based
+  toolchain in a Cygwin environment.  The three biggest are:
+
+  1. The Windows toolchain cannot follow Cygwin paths.  Path conversions are
+     performed automatically in the Cygwin makefiles using the 'cygpath' utility
+     but you might easily find some new path problems.  If so, check out 'cygpath -w'
+
+  2. Windows toolchains cannot follow Cygwin symbolic links.  Many symbolic links
+     are used in Nuttx (e.g., include/arch).  The make system works around these
+     problems for the Windows tools by copying directories instead of linking them.
+     But this can also cause some confusion for you:  For example, you may edit
+     a file in a "linked" directory and find that your changes had no effect.
+     That is because you are building the copy of the file in the "fake" symbolic
+     directory.  If you use a Windows toolchain, you should get in the habit of
+     making like this:
+
+       make clean_context all
+
+     An alias in your .bashrc file might make that less painful.
+
+  3. Dependencies are not made when using Windows versions of the GCC.  This is
+     because the dependencies are generated using Windows pathes which do not
+     work with the Cygwin make.
+
+     Support has been added for making dependencies with the windows-native toolchains.
+     That support can be enabled by modifying your Make.defs file as follows:
+
+    -  MKDEP                = $(TOPDIR)/tools/mknulldeps.sh
+    +  MKDEP                = $(TOPDIR)/tools/mkdeps.sh --winpaths "$(TOPDIR)"
+
+     If you have problems with the dependency build (for example, if you are not
+     building on C:), then you may need to modify tools/mkdeps.sh
+
+  NOTE 1: The CodeSourcery toolchain (2009q1) does not work with default optimization
+  level of -Os (See Make.defs).  It will work with -O0, -O1, or -O2, but not with
+  -Os.
+
+  NOTE 2: The devkitARM toolchain includes a version of MSYS make.  Make sure that
+  the paths to Cygwin's /bin and /usr/bin directories appear BEFORE the devkitARM
+  path or will get the wrong version of make.
+
+IDEs
+^^^^
+
+  NuttX is built using command-line make.  It can be used with an IDE, but some
+  effort will be required to create the project.
+  
+  Makefile Build
+  --------------
+  Under Eclipse, it is pretty easy to set up an "empty makefile project" and
+  simply use the NuttX makefile to build the system.  That is almost for free
+  under Linux.  Under Windows, you will need to set up the "Cygwin GCC" empty
+  makefile project in order to work with Windows (Google for "Eclipse Cygwin" -
+  there is a lot of help on the internet).
+
+  Native Build
+  ------------
+  Here are a few tips before you start that effort:
+
+  1) Select the toolchain that you will be using in your .config file
+  2) Start the NuttX build at least one time from the Cygwin command line
+     before trying to create your project.  This is necessary to create
+     certain auto-generated files and directories that will be needed.
+  3) Set up include pathes:  You will need include/, arch/arm/src/lm3s,
+     arch/arm/src/common, arch/arm/src/armv7-m, and sched/.
+  4) All assembly files need to have the definition option -D __ASSEMBLY__
+     on the command line.
+
+  Startup files will probably cause you some headaches.  The NuttX startup file
+  is arch/arm/src/lm3s/lm3s_vectors.S.
+
+NuttX buildroot Toolchain
+^^^^^^^^^^^^^^^^^^^^^^^^^
+
+  A GNU GCC-based toolchain is assumed.  The files */setenv.sh should
+  be modified to point to the correct path to the Cortex-M3 GCC toolchain (if
+  different from the default in your PATH variable).
+
+  If you have no Cortex-M3 toolchain, one can be downloaded from the NuttX
+  SourceForge download site (https://sourceforge.net/project/showfiles.php?group_id=189573).
+  This GNU toolchain builds and executes in the Linux or Cygwin environment.
+
+  This port was tested with tools built using summon-arm-toolchain; available
+  from https://github.com/esden/summon-arm-toolchain, however the buildroot
+  instructions should apply for other platforms.
+
+  1. You must have already configured Nuttx in <some-dir>/nuttx.
+
+     cd tools
+     ./configure.sh lm3s6432-s2e/<sub-dir>
+
+  2. Download the latest buildroot package into <some-dir>
+
+  3. unpack the buildroot tarball.  The resulting directory may
+     have versioning information on it like buildroot-x.y.z.  If so,
+     rename <some-dir>/buildroot-x.y.z to <some-dir>/buildroot.
+
+  4. cd <some-dir>/buildroot
+
+  5. cp configs/cortexm3-defconfig-4.3.3 .config
+
+  6. make oldconfig
+
+  7. make
+
+  8. Edit setenv.h, if necessary, so that the PATH variable includes
+     the path to the newly built binaries.
+
+  See the file configs/README.txt in the buildroot source tree.  That has more
+  detailed PLUS some special instructions that you will need to follow if you
+  are building a Cortex-M3 toolchain for Cygwin under Windows.
+
+  NOTE: This is an OABI toolchain.
+
+
+Stellaris MDL-S2E Reference Design Configuration Options
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+	CONFIG_ARCH - Identifies the arch/ subdirectory.  This should
+	   be set to:
+
+	   CONFIG_ARCH=arm
+
+	CONFIG_ARCH_family - For use in C code:
+
+	   CONFIG_ARCH_ARM=y
+
+	CONFIG_ARCH_architecture - For use in C code:
+
+	   CONFIG_ARCH_CORTEXM3=y
+
+	CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+
+	   CONFIG_ARCH_CHIP=lm3s
+
+	CONFIG_ARCH_CHIP_name - For use in C code to identify the exact
+	   chip:
+
+	   CONFIG_ARCH_CHIP_LM3S6432
+
+	CONFIG_ARCH_BOARD - Identifies the configs subdirectory and
+	   hence, the board that supports the particular chip or SoC.
+
+	   CONFIG_ARCH_BOARD=lm3s6432-s2e (for the Stellaris MDL-S2E Reference Design)
+
+	CONFIG_ARCH_BOARD_name - For use in C code
+
+	   CONFIG_ARCH_BOARD_LM3S6432S2E
+
+	CONFIG_ARCH_LOOPSPERMSEC - As supplied, calibrated for correct operation
+	   of delay loops assuming 50MHz CPU frequency.
+
+	CONFIG_ENDIAN_BIG - define if big endian (default is little
+	   endian)
+
+	CONFIG_DRAM_SIZE - Describes the installed DRAM (SRAM in this case):
+
+	   CONFIG_DRAM_SIZE=0x00010000 (64Kb)
+
+	CONFIG_DRAM_START - The start address of installed DRAM
+
+	   CONFIG_DRAM_START=0x20000000
+
+	CONFIG_DRAM_END - Last address+1 of installed RAM
+
+	   CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+
+	CONFIG_ARCH_IRQPRIO - The LM3S6918 supports interrupt prioritization
+
+	   CONFIG_ARCH_IRQPRIO=y
+
+	CONFIG_ARCH_LEDS - Use LEDs to show state. Unique to boards that
+	   have LEDs
+
+	CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+	   stack. If defined, this symbol is the size of the interrupt
+	    stack in bytes.  If not defined, the user task stacks will be
+	  used during interrupt handling.
+
+	CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+
+	CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+
+	CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+	   cause a 100 second delay during boot-up.  This 100 second delay
+	   serves no purpose other than it allows you to calibratre
+	   CONFIG_ARCH_LOOPSPERMSEC.  You simply use a stop watch to measure
+	   the 100 second delay then adjust CONFIG_ARCH_LOOPSPERMSEC until
+	   the delay actually is 100 seconds.
+
+  There are configurations for disabling support for interrupts GPIO ports.
+  GPIOH and GPIOJ must be disabled because they do not exist on the LM3S6432.
+  Additional interrupt support can be disabled if desired to reduce memory
+  footprint - GPIOs C-G are not pinned out on the MDL-S2E board.
+
+	CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
+	CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
+	CONFIG_LM3S_DISABLE_GPIOC_IRQS=y
+	CONFIG_LM3S_DISABLE_GPIOD_IRQS=y
+	CONFIG_LM3S_DISABLE_GPIOE_IRQS=y
+	CONFIG_LM3S_DISABLE_GPIOF_IRQS=y
+	CONFIG_LM3S_DISABLE_GPIOG_IRQS=y
+	CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
+	CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
+ 
+  LM3S6432 specific device driver settings
+
+	CONFIG_UARTn_DISABLE
+	   The TX and RX pins for UART1 share I/O pins with the TX and RX pins
+	   for SSI0.  To avoid conflicts, only one of SSI0 and UART1 should
+	   be enabled in a configuration.
+	CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+	   console and ttys0 (default is UART1).
+	CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+	   This specific the size of the receive buffer
+	CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+	   being sent.  This specific the size of the transmit buffer
+	CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
+	CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
+	CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+	CONFIG_UARTn_2STOP - Two stop bits
+
+	CONFIG_SSI0_DISABLE - Select to disable support for SSI0
+	  The TX and RX pins for SSI0 share I/O pins with the TX and RX pins
+	  for UART1.  To avoid conflicts, only one of SSI0 and UART1 should
+	  be enabled in a configuration.
+	CONFIG_SSI1_DISABLE - Select to disable support for SSI1
+	  Note that the LM3S6432 only has one SSI, so SSI1 should always be
+	  disabled.
+	CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support.
+	  Poll-waiting is recommended if the interrupt rate would be to
+	  high in the interrupt driven case.
+	CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
+	  emptying the Rx FIFO.  If the SPI frequency is high and this
+	  value is large, then larger values of this setting may cause
+	  Rx FIFO overrun errors.  Default: half of the Tx FIFO size (4).
+
+	CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
+	  to build the LM3S Ethernet driver
+	CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
+	CONFIG_LM3S_BOARDMAC - This should be set in order to use the
+	  MAC address configured in the flash USER registers.
+	CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation
+	CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation
+	CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding
+	CONFIG_LM3S_MULTICAST - Set to enable multicast frames
+	CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode
+	CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection.
+	CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console.
+
+Configurations
+^^^^^^^^^^^^^^
+
+Each Stellaris MDL-S2E Reference Design configuration is maintained in a
+sudirectory and can be selected as follow:
+
+	cd tools
+	./configure.sh lm3s6432-s2e/<subdir>
+	cd -
+	. ./setenv.sh
+
+Where <subdir> is one of the following:
+
+  nsh:
+    Configures the NuttShell (nsh) located at examples/nsh.  The
+    Configuration enables both the serial and telnetd NSH interfaces.
+
+    NOTE: As it is configured now, you MUST have a network connected.
+    Otherwise, the NSH prompt will not come up because the Ethernet
+    driver is waiting for the network to come up.  That is probably
+    a bug in the Ethernet driver behavior!
+
+  ostest:
+    This configuration directory, performs a simple OS test using
+    examples/ostest.
+
+    NOTE: as the configuration stands, ostest will hang during the 
+    semaphore test.  This has not been debugged.
--- a/configs/lm3s6432-s2e/include/README.txt
+++ b/configs/lm3s6432-s2e/include/README.txt
@ -0,0 +1 @@
+This directory contains header files unique to the Stellaris MDL-S2E Reference Design.
--- a/configs/lm3s6432-s2e/include/board.h
+++ b/configs/lm3s6432-s2e/include/board.h
@ -0,0 +1,144 @@
+/************************************************************************************
+ * configs/lm3s6432-s2e/include/board.h
+ * include/arch/board/board.h
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __ARCH_BOARD_BOARD_H
+#define __ARCH_BOARD_BOARD_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Clocking *************************************************************************/
+
+/* RCC settings */
+
+#define SYSCON_RCC_XTAL      SYSCON_RCC_XTAL8000KHZ /* S2E on-board crystal is 8.00 MHz */
+#define XTAL_FREQUENCY       8000000
+
+/* Oscillator source is the main oscillator (not internal, internal/4, 30KHz or
+ * 30KHz from hibernate module) */
+
+#define SYSCON_RCC_OSCSRC    SYSCON_RCC_OSCSRC_MOSC
+#define SYSCON_RCC2_OSCSRC   SYSCON_RCC2_OSCSRC2_MOSC
+#define OSCSRC_FREQUENCY     XTAL_FREQUENCY
+
+/* Use system divider = 4; this corresponds to a system clock frequency
+ * of (400 / 2) / 4 = 50MHz
+ */
+
+#define LM3S_SYSDIV          4
+#define SYSCLK_FREQUENCY     50000000  /* 50MHz */
+
+/* Other RCC settings:
+ *
+ * - Main and internal oscillators enabled.
+ * - PLL and sys dividers not bypassed
+ * - PLL not powered down
+ * - No auto-clock gating reset
+ */
+
+#define LM3S_RCC_VALUE (SYSCON_RCC_OSCSRC | SYSCON_RCC_XTAL | SYSCON_RCC_USESYSDIV | SYSCON_RCC_SYSDIV(LM3S_SYSDIV))
+
+/* RCC2 settings -- RCC2 not used.  Other RCC2 settings
+ *
+ * - PLL and sys dividers not bypassed.
+ * - PLL not powered down
+ * - Not using RCC2
+ */
+
+#define LM3S_RCC2_VALUE (SYSCON_RCC2_OSCSRC | SYSCON_RCC2_SYSDIV(LM3S_SYSDIV))
+
+/* LED definitions ******************************************************************/
+
+/* The S2E has two LEDs on PF2/PF3, shared with the Ethernet.
+ * In keeping with the other lm3s6xxx port, we use one of these for debugging.
+ * Below is the mapping of this
+ * single LED.  From this single LED, we can get the following information:
+ *
+ *   OFF Steady:    The system has failed to boot to the point of enabling interrupts
+ *   ON Steady:     The systems has enabled interrupts, but none have been received
+ *   Dull glow:     The system is taking interrupts
+ *   Slow blinking: The system has panicked
+ */
+                                /* ON   OFF */
+#define LED_STARTED       0     /* OFF  OFF */
+#define LED_HEAPALLOCATE  1     /* OFF  OFF */
+#define LED_IRQSENABLED   2     /* ON   ON */
+#define LED_STACKCREATED  3     /* ON   ON */
+#define LED_INIRQ         4     /* ON   OFF */
+#define LED_SIGNAL        5     /* ON   OFF */
+#define LED_ASSERTION     6     /* ON   OFF */
+#define LED_PANIC         7     /* ON   OFF */
+
+/************************************************************************************
+ * Public Function Prototypes
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Name: lm3s_boardinitialize
+ *
+ * Description:
+ *   All LM3S architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ *
+ ************************************************************************************/
+
+extern void lm3s_boardinitialize(void);
+
+/************************************************************************************
+ * Name: lm3s_ethernetmac
+ *
+ * Description:
+ *   For the MDL-S2E Reference Design, the MAC address will be stored in the 
+ *   non-volatile USER0 and USER1 registers.  If CONFIG_LM3S_BOARDMAC is defined, 
+ *   this function will obtain the MAC address from these registers.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LM3S_BOARDMAC
+struct ether_addr;
+extern void lm3s_ethernetmac(struct ether_addr *ethaddr);
+#endif
+
+#endif /* __ASSEMBLY__ */
+#endif  /* __ARCH_BOARD_BOARD_H */
--- a/configs/lm3s6432-s2e/nsh/Make.defs
+++ b/configs/lm3s6432-s2e/nsh/Make.defs
@ -0,0 +1,162 @@
+############################################################################
+# configs/lm3s6432-s2e/nsh/Make.defs
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LM3S_CODESOURCERYW),y)
+  # CodeSourcery under Windows
+  CROSSDEV = arm-none-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LM3S_CODESOURCERYL),y)
+  # CodeSourcery under Linux
+  CROSSDEV = arm-none-eabi-
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+  MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LM3S_DEVKITARM),y)
+  # devkitARM under Windows
+  CROSSDEV = arm-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LM3S_BUILDROOT),y)
+  # NuttX buildroot under Linux or Cygwin
+  CROSSDEV = arm-elf-
+  ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+  MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/nsh/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
--- a/configs/lm3s6432-s2e/nsh/appconfig
+++ b/configs/lm3s6432-s2e/nsh/appconfig
@ -0,0 +1,54 @@
+############################################################################
+# configs/lm3s6432-s2e/nsh/appconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/nsh
+
+# NSH library
+
+CONFIGURED_APPS += nshlib
+
+# Networking support
+
+ifeq ($(CONFIG_NET),y)
+CONFIGURED_APPS += netutils/uiplib
+CONFIGURED_APPS += netutils/dhcpc
+CONFIGURED_APPS += netutils/resolv
+CONFIGURED_APPS += netutils/tftpc
+CONFIGURED_APPS += netutils/webclient
+endif
+
+
--- a/configs/lm3s6432-s2e/nsh/defconfig
+++ b/configs/lm3s6432-s2e/nsh/defconfig
@ -0,0 +1,618 @@
+############################################################################
+# configs/lm3s6432-s2e/nsh/defconfig
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The LM3S6432 supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibratre
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lm3s
+CONFIG_ARCH_CHIP_LM3S6432=y
+CONFIG_ARCH_BOARD=lm3s6432-s2e
+CONFIG_ARCH_BOARD_LM3S6432S2E=y
+CONFIG_BOARD_LOOPSPERMSEC=4531
+CONFIG_DRAM_SIZE=0x00008000
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_CALIBRATION=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LM3S_CODESOURCERYW=n
+CONFIG_LM3S_CODESOURCERYL=y
+CONFIG_LM3S_DEVKITARM=n
+CONFIG_LM3S_BUILDROOT=n
+
+#
+# Disable support for interrupts on GPIOs which do not
+# exist on the LM3S6432 or are not pinned anywhere useful
+# on the S2E.
+#
+CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
+CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
+CONFIG_LM3S_DISABLE_GPIOC_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOD_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOE_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOF_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOG_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
+
+#
+# LM3S6432 specific serial device driver settings
+#
+# CONFIG_UARTn_DISABLE - select to disable all support for
+#   the UART
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+#   console and ttys0 (default is the UART0).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_DISABLE=n
+CONFIG_UART1_DISABLE=n
+CONFIG_UART2_DISABLE=y
+CONFIG_UART0_SERIAL_CONSOLE=n
+CONFIG_UART1_SERIAL_CONSOLE=y
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART1_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+
+#
+# LM3S6432 specific SSI device driver settings
+#
+# CONFIG_SSIn_DISABLE - select to disable all support for
+#   the SSI
+# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support
+#   Poll-waiting is recommended if the interrupt rate would be to
+#   high in the interrupt driven case.
+# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
+#   emptying the Rx FIFO.  If the SPI frequency is high and this
+#   value is large, then larger values of this setting may cause
+#   Rx FIFO overrun errors.  Default: half of the Tx FIFO size (4).
+#
+CONFIG_SSI0_DISABLE=y
+CONFIG_SSI1_DISABLE=y
+CONFIG_SSI_POLLWAIT=y
+#CONFIG_SSI_TXLIMIT=4
+
+#
+# LM3S6432 specific ethernet device driver settings
+#
+# CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
+#   to build the LM3S Ethernet driver
+# CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
+# CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide
+#   a MAC address (via lm3s_ethernetmac()), then this should be selected.
+# CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation
+# CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation
+# CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding
+# CONFIG_LM3S_MULTICAST - Set to enable multicast frames
+# CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode
+# CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection.
+# CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console.
+#
+CONFIG_LM3S_ETHERNET=y
+CONFIG_LM3S_ETHLEDS=n
+CONFIG_LM3S_BOARDMAC=y
+CONFIG_LM3S_ETHHDUPLEX=n
+CONFIG_LM3S_ETHNOAUTOCRC=n
+CONFIG_LM3S_ETHNOPAD=n
+CONFIG_LM3S_MULTICAST=n
+CONFIG_LM3S_PROMISCUOUS=n
+CONFIG_LM3S_BADCRC=n
+CONFIG_LM3S_DUMPPACKET=n
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+#  This format will support execution of NuttX binaries located
+#  in a ROMFS filesystem (see examples/nxflat).
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_DEBUG_NET=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=10
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=5
+CONFIG_START_DAY=8
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=n
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+#   Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+#   Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+#   Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=0
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+#   accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=y
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=8
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=562
+CONFIG_NET_TCP=y
+CONFIG_NET_TCP_CONNS=8
+CONFIG_NET_NTCP_READAHEAD_BUFFERS=16
+CONFIG_NET_TCPBACKLOG=n
+CONFIG_NET_MAX_LISTENPORTS=8
+CONFIG_NET_UDP=y
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=8
+CONFIG_NET_ICMP=y
+CONFIG_NET_ICMP_PING=y
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# Settings for examples/uip
+#
+#CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+#CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+#CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=y
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_STACKSIZE=2048
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=y
+CONFIG_NSH_ARCHINIT=y
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the LM3S6432 which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
--- a/configs/lm3s6432-s2e/nsh/ld.script
+++ b/configs/lm3s6432-s2e/nsh/ld.script
@ -0,0 +1,108 @@
+/****************************************************************************
+ * configs/lm3s6432-s2e/nsh/ld.script
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LM3S6432 has 96Kb of FLASH beginning at address 0x0000:0000 and 32Kb
+ * of SRAM beginning at 0x2000:0000.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x00000000, LENGTH = 96K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	_eronly = ABSOLUTE(.);		/* See below                    */
+
+	/* The LM3S6432 has 32Kb of SRAM beginning at the following address */
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} >sram
+
+	.ARM.exidx : {
+		__exidx_start = ABSOLUTE(.);
+		*(.ARM.exidx*)
+		__exidx_end = ABSOLUTE(.);
+	} >sram
+
+	.bss : {			/* BSS				*/
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+					/* Stabs debugging sections.	*/
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
--- a/configs/lm3s6432-s2e/nsh/setenv.sh
+++ b/configs/lm3s6432-s2e/nsh/setenv.sh
@ -0,0 +1,46 @@
+#!/bin/bash
+# configs/lm3s6432-s2e/nsh/setenv.sh
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
--- a/configs/lm3s6432-s2e/ostest/Make.defs
+++ b/configs/lm3s6432-s2e/ostest/Make.defs
@ -0,0 +1,162 @@
+############################################################################
+# configs/lm3s6432-s2e/ostest/Make.defs
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+include ${TOPDIR}/.config
+
+# Setup for the selected toolchain
+
+ifeq ($(CONFIG_LM3S_CODESOURCERYW),y)
+  # CodeSourcery under Windows
+  CROSSDEV = arm-none-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LM3S_CODESOURCERYL),y)
+  # CodeSourcery under Linux
+  CROSSDEV = arm-none-eabi-
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+  MAXOPTIMIZATION = -O2
+endif
+ifeq ($(CONFIG_LM3S_DEVKITARM),y)
+  # devkitARM under Windows
+  CROSSDEV = arm-eabi-
+  WINTOOL = y
+  ARCHCPUFLAGS = -mcpu=cortex-m3 -mthumb -mfloat-abi=soft
+endif
+ifeq ($(CONFIG_LM3S_BUILDROOT),y)
+  # NuttX buildroot under Linux or Cygwin
+  CROSSDEV = arm-elf-
+  ARCHCPUFLAGS = -mtune=cortex-m3 -march=armv7-m -mfloat-abi=soft
+  MAXOPTIMIZATION = -Os
+endif
+
+ifeq ($(WINTOOL),y)
+  # Windows-native toolchains
+  DIRLINK = $(TOPDIR)/tools/winlink.sh
+  DIRUNLINK = $(TOPDIR)/tools/unlink.sh
+  MKDEP = $(TOPDIR)/tools/mknulldeps.sh
+  ARCHINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}"
+  ARCHXXINCLUDES = -I. -isystem "${shell cygpath -w $(TOPDIR)/include}" -isystem "${shell cygpath -w $(TOPDIR)/include/cxx}"
+  ARCHSCRIPT = -T "${shell cygpath -w $(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script}"
+  MAXOPTIMIZATION = -O2
+else
+  # Linux/Cygwin-native toolchain 
+  MKDEP = $(TOPDIR)/tools/mkdeps.sh
+  ARCHINCLUDES = -I. -isystem $(TOPDIR)/include
+  ARCHXXINCLUDES = -I. -isystem $(TOPDIR)/include -isystem $(TOPDIR)/include/cxx
+  ARCHSCRIPT = -T$(TOPDIR)/configs/$(CONFIG_ARCH_BOARD)/ostest/ld.script
+endif
+
+CC = $(CROSSDEV)gcc
+CXX = $(CROSSDEV)g++
+CPP = $(CROSSDEV)gcc -E
+LD = $(CROSSDEV)ld
+AR = $(CROSSDEV)ar rcs
+NM = $(CROSSDEV)nm
+OBJCOPY = $(CROSSDEV)objcopy
+OBJDUMP = $(CROSSDEV)objdump
+
+ARCHCCVERSION = ${shell $(CC) -v 2>&1 | sed -n '/^gcc version/p' | sed -e 's/^gcc version \([0-9\.]\)/\1/g' -e 's/[-\ ].*//g' -e '1q'}
+ARCHCCMAJOR = ${shell echo $(ARCHCCVERSION) | cut -d'.' -f1}
+
+ifeq ("${CONFIG_DEBUG_SYMBOLS}","y")
+  ARCHOPTIMIZATION = -g
+else
+  ARCHOPTIMIZATION = $(MAXOPTIMIZATION) -fno-strict-aliasing -fno-strength-reduce -fomit-frame-pointer
+endif
+
+ARCHCFLAGS = -fno-builtin
+ARCHCXXFLAGS = -fno-builtin -fno-exceptions
+ARCHWARNINGS = -Wall -Wstrict-prototypes -Wshadow
+ARCHWARNINGSXX = -Wall -Wshadow
+ARCHDEFINES =
+ARCHPICFLAGS = -fpic -msingle-pic-base -mpic-register=r10
+
+CFLAGS = $(ARCHCFLAGS) $(ARCHWARNINGS) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CPICFLAGS = $(ARCHPICFLAGS) $(CFLAGS)
+CXXFLAGS = $(ARCHCXXFLAGS) $(ARCHWARNINGSXX) $(ARCHOPTIMIZATION) $(ARCHCPUFLAGS) $(ARCHXXINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES) -pipe
+CXXPICFLAGS = $(ARCHPICFLAGS) $(CXXFLAGS)
+CPPFLAGS = $(ARCHINCLUDES) $(ARCHDEFINES) $(EXTRADEFINES)
+AFLAGS = $(CFLAGS) -D__ASSEMBLY__
+
+NXFLATLDFLAGS1 = -r -d -warn-common
+NXFLATLDFLAGS2 = $(NXFLATLDFLAGS1) -T$(TOPDIR)/binfmt/libnxflat/gnu-nxflat.ld -no-check-sections
+LDNXFLATFLAGS = -e main -s 2048
+
+OBJEXT = .o
+LIBEXT = .a
+EXEEXT =
+
+ifneq ($(CROSSDEV),arm-elf-)
+  LDFLAGS += -nostartfiles -nodefaultlibs
+endif
+ifeq ($(CONFIG_DEBUG_SYMBOLS),y)
+  LDFLAGS += -g
+endif
+
+define PREPROCESS
+	@echo "CPP: $1->$2"
+	@$(CPP) $(CPPFLAGS) $1 -o $2
+endef
+
+define COMPILE
+	@echo "CC: $1"
+	@$(CC) -c $(CFLAGS) $1 -o $2
+endef
+
+define COMPILEXX
+	@echo "CXX: $1"
+	@$(CXX) -c $(CXXFLAGS) $1 -o $2
+endef
+
+define ASSEMBLE
+	@echo "AS: $1"
+	@$(CC) -c $(AFLAGS) $1 -o $2
+endef
+
+define ARCHIVE
+	echo "AR: $2"; \
+	$(AR) $1 $2 || { echo "$(AR) $1 $2 FAILED!" ; exit 1 ; }
+endef
+
+define CLEAN
+	@rm -f *.o *.a
+endef
+
+HOSTCC = gcc
+HOSTINCLUDES = -I.
+HOSTCFLAGS = -Wall -Wstrict-prototypes -Wshadow -g -pipe
+HOSTLDFLAGS =
+
--- a/configs/lm3s6432-s2e/ostest/appconfig
+++ b/configs/lm3s6432-s2e/ostest/appconfig
@ -0,0 +1,39 @@
+############################################################################
+# configs/lm3s6432-s2e/ostest/appconfig
+#
+#   Copyright (C) 2011 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+# Path to example in apps/examples containing the user_start entry point
+
+CONFIGURED_APPS += examples/ostest
+
--- a/configs/lm3s6432-s2e/ostest/defconfig
+++ b/configs/lm3s6432-s2e/ostest/defconfig
@ -0,0 +1,615 @@
+############################################################################
+# configs/lm3s6432-s2e/nsh/defconfig
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+#
+# architecture selection
+#
+# CONFIG_ARCH - identifies the arch subdirectory and, hence, the
+#   processor architecture.
+# CONFIG_ARCH_family - for use in C code.  This identifies the
+#   particular chip family that the architecture is implemented
+#   in.
+# CONFIG_ARCH_architecture - for use in C code.  This identifies the
+#   specific architecture within the chip familyl.
+# CONFIG_ARCH_CHIP - Identifies the arch/*/chip subdirectory
+# CONFIG_ARCH_CHIP_name - For use in C code
+# CONFIG_ARCH_BOARD - identifies the configs subdirectory and, hence,
+#   the board that supports the particular chip or SoC.
+# CONFIG_ARCH_BOARD_name - for use in C code
+# CONFIG_ENDIAN_BIG - define if big endian (default is little endian)
+# CONFIG_BOARD_LOOPSPERMSEC - for delay loops
+# CONFIG_DRAM_SIZE - Describes the installed DRAM.
+# CONFIG_DRAM_START - The start address of DRAM (physical)
+# CONFIG_DRAM_END - Last address+1 of installed RAM
+# CONFIG_ARCH_IRQPRIO - The LM3S6432 supports interrupt prioritization
+# CONFIG_ARCH_INTERRUPTSTACK - This architecture supports an interrupt
+#   stack. If defined, this symbol is the size of the interrupt
+#   stack in bytes.  If not defined, the user task stacks will be
+#   used during interrupt handling.
+# CONFIG_ARCH_STACKDUMP - Do stack dumps after assertions
+# CONFIG_ARCH_LEDS -  Use LEDs to show state. Unique to board architecture.
+# CONFIG_ARCH_CALIBRATION - Enables some build in instrumentation that
+#   cause a 100 second delay during boot-up.  This 100 second delay
+#   serves no purpose other than it allows you to calibratre
+#   CONFIG_BOARD_LOOPSPERMSEC.  You simply use a stop watch to measure
+#   the 100 second delay then adjust CONFIG_BOARD_LOOPSPERMSEC until
+#   the delay actually is 100 seconds.
+#
+CONFIG_ARCH=arm
+CONFIG_ARCH_ARM=y
+CONFIG_ARCH_CORTEXM3=y
+CONFIG_ARCH_CHIP=lm3s
+CONFIG_ARCH_CHIP_LM3S6432=y
+CONFIG_ARCH_BOARD=lm3s6432-s2e
+CONFIG_ARCH_BOARD_LM3S6432S2E=y
+CONFIG_BOARD_LOOPSPERMSEC=4531
+CONFIG_DRAM_SIZE=0x00008000
+CONFIG_DRAM_START=0x20000000
+CONFIG_DRAM_END=(CONFIG_DRAM_START+CONFIG_DRAM_SIZE)
+CONFIG_ARCH_IRQPRIO=y
+CONFIG_ARCH_INTERRUPTSTACK=n
+CONFIG_ARCH_STACKDUMP=y
+CONFIG_ARCH_LEDS=y
+CONFIG_ARCH_CALIBRATION=n
+
+#
+# Identify toolchain and linker options
+#
+CONFIG_LM3S_CODESOURCERYW=n
+CONFIG_LM3S_CODESOURCERYL=y
+CONFIG_LM3S_DEVKITARM=n
+CONFIG_LM3S_BUILDROOT=n
+
+#
+# Disable support for interrupts on GPIOs which do not
+# exist on the LM3S6432 or are not pinned anywhere useful
+# on the S2E.
+#
+CONFIG_LM3S_DISABLE_GPIOA_IRQS=n
+CONFIG_LM3S_DISABLE_GPIOB_IRQS=n
+CONFIG_LM3S_DISABLE_GPIOC_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOD_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOE_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOF_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOG_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOH_IRQS=y
+CONFIG_LM3S_DISABLE_GPIOJ_IRQS=y
+
+#
+# LM3S6432 specific serial device driver settings
+#
+# CONFIG_UARTn_DISABLE - select to disable all support for
+#   the UART
+# CONFIG_UARTn_SERIAL_CONSOLE - selects the UARTn for the
+#   console and ttys0 (default is the UART0).
+# CONFIG_UARTn_RXBUFSIZE - Characters are buffered as received.
+#   This specific the size of the receive buffer
+# CONFIG_UARTn_TXBUFSIZE - Characters are buffered before
+#   being sent.  This specific the size of the transmit buffer
+# CONFIG_UARTn_BAUD - The configure BAUD of the UART.  Must be
+# CONFIG_UARTn_BITS - The number of bits.  Must be either 7 or 8.
+# CONFIG_UARTn_PARTIY - 0=no parity, 1=odd parity, 2=even parity
+# CONFIG_UARTn_2STOP - Two stop bits
+#
+CONFIG_UART0_DISABLE=n
+CONFIG_UART1_DISABLE=n
+CONFIG_UART2_DISABLE=y
+CONFIG_UART0_SERIAL_CONSOLE=n
+CONFIG_UART1_SERIAL_CONSOLE=y
+CONFIG_UART2_SERIAL_CONSOLE=n
+CONFIG_UART0_TXBUFSIZE=256
+CONFIG_UART1_TXBUFSIZE=256
+CONFIG_UART2_TXBUFSIZE=256
+CONFIG_UART0_RXBUFSIZE=256
+CONFIG_UART1_RXBUFSIZE=256
+CONFIG_UART2_RXBUFSIZE=256
+CONFIG_UART0_BAUD=115200
+CONFIG_UART1_BAUD=115200
+CONFIG_UART2_BAUD=115200
+CONFIG_UART0_BITS=8
+CONFIG_UART1_BITS=8
+CONFIG_UART2_BITS=8
+CONFIG_UART0_PARITY=0
+CONFIG_UART1_PARITY=0
+CONFIG_UART2_PARITY=0
+CONFIG_UART0_2STOP=0
+CONFIG_UART1_2STOP=0
+CONFIG_UART2_2STOP=0
+
+#
+# LM3S6432 specific SSI device driver settings
+#
+# CONFIG_SSIn_DISABLE - select to disable all support for
+#   the SSI
+# CONFIG_SSI_POLLWAIT - Select to disable interrupt driven SSI support
+#   Poll-waiting is recommended if the interrupt rate would be to
+#   high in the interrupt driven case.
+# CONFIG_SSI_TXLIMIT - Write this many words to the Tx FIFO before
+#   emptying the Rx FIFO.  If the SPI frequency is high and this
+#   value is large, then larger values of this setting may cause
+#   Rx FIFO overrun errors.  Default: half of the Tx FIFO size (4).
+#
+CONFIG_SSI0_DISABLE=y
+CONFIG_SSI1_DISABLE=y
+CONFIG_SSI_POLLWAIT=y
+#CONFIG_SSI_TXLIMIT=4
+
+#
+# LM3S6432 specific ethernet device driver settings
+#
+# CONFIG_LM3S_ETHERNET - This must be set (along with CONFIG_NET)
+#   to build the LM3S Ethernet driver
+# CONFIG_LM3S_ETHLEDS - Enable to use Ethernet LEDs on the board.
+# CONFIG_LM3S_BOARDMAC - If the board-specific logic can provide
+#   a MAC address (via lm3s_ethernetmac()), then this should be selected.
+# CONFIG_LM3S_ETHHDUPLEX - Set to force half duplex operation
+# CONFIG_LM3S_ETHNOAUTOCRC - Set to suppress auto-CRC generation
+# CONFIG_LM3S_ETHNOPAD - Set to suppress Tx padding
+# CONFIG_LM3S_MULTICAST - Set to enable multicast frames
+# CONFIG_LM3S_PROMISCUOUS - Set to enable promiscuous mode
+# CONFIG_LM3S_BADCRC - Set to enable bad CRC rejection.
+# CONFIG_LM3S_DUMPPACKET - Dump each packet received/sent to the console.
+#
+CONFIG_LM3S_ETHERNET=n
+CONFIG_LM3S_ETHLEDS=n
+CONFIG_LM3S_BOARDMAC=y
+CONFIG_LM3S_ETHHDUPLEX=n
+CONFIG_LM3S_ETHNOAUTOCRC=n
+CONFIG_LM3S_ETHNOPAD=n
+CONFIG_LM3S_MULTICAST=n
+CONFIG_LM3S_PROMISCUOUS=n
+CONFIG_LM3S_BADCRC=n
+CONFIG_LM3S_DUMPPACKET=n
+
+#
+# General build options
+#
+# CONFIG_RRLOAD_BINARY - make the rrload binary format used with
+#   BSPs from www.ridgerun.com using the tools/mkimage.sh script
+# CONFIG_INTELHEX_BINARY - make the Intel HEX binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_MOTOROLA_SREC - make the Motorola S-Record binary format
+#   used with many different loaders using the GNU objcopy program
+#   Should not be selected if you are not using the GNU toolchain.
+# CONFIG_RAW_BINARY - make a raw binary format file used with many
+#   different loaders using the GNU objcopy program.  This option
+#   should not be selected if you are not using the GNU toolchain.
+# CONFIG_HAVE_LIBM - toolchain supports libm.a
+#
+CONFIG_RRLOAD_BINARY=n
+CONFIG_INTELHEX_BINARY=n
+CONFIG_MOTOROLA_SREC=n
+CONFIG_RAW_BINARY=y
+CONFIG_HAVE_LIBM=n
+
+#
+# General OS setup
+#
+# CONFIG_APPS_DIR - Identifies the relative path to the directory
+#   that builds the application to link with NuttX.  Default: ../apps
+# CONFIG_DEBUG - enables built-in debug options
+# CONFIG_DEBUG_VERBOSE - enables verbose debug output
+# CONFIG_DEBUG_SYMBOLS - build without optimization and with
+#   debug symbols (needed for use with a debugger).
+# CONFIG_MM_REGIONS - If the architecture includes multiple
+#   regions of memory to allocate from, this specifies the
+#   number of memory regions that the memory manager must
+#   handle and enables the API mm_addregion(start, end);
+# CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
+#   time console output
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
+#   inform NuttX that the processor hardware is providing
+#   system timer interrupts at some interrupt interval other
+#   than 10 msec.
+# CONFIG_RR_INTERVAL - The round robin timeslice will be set
+#   this number of milliseconds;  Round robin scheduling can
+#   be disabled by setting this value to zero.
+# CONFIG_SCHED_INSTRUMENTATION - enables instrumentation in 
+#   scheduler to monitor system performance
+# CONFIG_TASK_NAME_SIZE - Spcifies that maximum size of a
+#   task name to save in the TCB.  Useful if scheduler
+#   instrumentation is selected.  Set to zero to disable.
+# CONFIG_START_YEAR, CONFIG_START_MONTH, CONFIG_START_DAY -
+#   Used to initialize the internal time logic.
+# CONFIG_GREGORIAN_TIME - Enables Gregorian time conversions.
+#   You would only need this if you are concerned about accurate
+#   time conversions in the past or in the distant future.
+# CONFIG_JULIAN_TIME - Enables Julian time conversions. You
+#   would only need this if you are concerned about accurate
+#   time conversion in the distand past.  You must also define
+#   CONFIG_GREGORIAN_TIME in order to use Julian time.
+# CONFIG_DEV_CONSOLE - Set if architecture-specific logic
+#   provides /dev/console.  Enables stdout, stderr, stdin.
+# CONFIG_DEV_LOWCONSOLE - Use the simple, low-level serial console
+#   driver (minimul support)
+# CONFIG_MUTEX_TYPES: Set to enable support for recursive and
+#   errorcheck mutexes. Enables pthread_mutexattr_settype().
+# CONFIG_PRIORITY_INHERITANCE : Set to enable support for priority
+#   inheritance on mutexes and semaphores. 
+# CONFIG_SEM_PREALLOCHOLDERS: This setting is only used if priority
+#   inheritance is enabled.  It defines the maximum number of
+#   different threads (minus one) that can take counts on a
+#   semaphore with priority inheritance support.  This may be 
+#   set to zero if priority inheritance is disabled OR if you
+#   are only using semaphores as mutexes (only one holder) OR
+#   if no more than two threads participate using a counting
+#   semaphore.
+# CONFIG_SEM_NNESTPRIO.  If priority inheritance is enabled,
+#   then this setting is the maximum number of higher priority
+#   threads (minus 1) than can be waiting for another thread
+#   to release a count on a semaphore.  This value may be set
+#   to zero if no more than one thread is expected to wait for
+#   a semaphore.
+# CONFIG_FDCLONE_DISABLE. Disable cloning of all file descriptors
+#   by task_create() when a new task is started.  If set, all
+#   files/drivers will appear to be closed in the new task.
+# CONFIG_FDCLONE_STDIO. Disable cloning of all but the first
+#   three file descriptors (stdin, stdout, stderr) by task_create()
+#   when a new task is started. If set, all files/drivers will
+#   appear to be closed in the new task except for stdin, stdout,
+#   and stderr.
+# CONFIG_SDCLONE_DISABLE. Disable cloning of all socket
+#   desciptors by task_create() when a new task is started. If
+#   set, all sockets will appear to be closed in the new task.
+# CONFIG_NXFLAT. Enable support for the NXFLAT binary format.
+#  This format will support execution of NuttX binaries located
+#  in a ROMFS filesystem (see examples/nxflat).
+#
+#CONFIG_APPS_DIR=
+CONFIG_DEBUG=n
+CONFIG_DEBUG_VERBOSE=n
+CONFIG_DEBUG_SYMBOLS=n
+CONFIG_MM_REGIONS=1
+CONFIG_ARCH_LOWPUTC=y
+CONFIG_RR_INTERVAL=200
+CONFIG_SCHED_INSTRUMENTATION=n
+CONFIG_TASK_NAME_SIZE=0
+CONFIG_START_YEAR=2010
+CONFIG_START_MONTH=5
+CONFIG_START_DAY=6
+CONFIG_GREGORIAN_TIME=n
+CONFIG_JULIAN_TIME=n
+CONFIG_DEV_CONSOLE=y
+CONFIG_DEV_LOWCONSOLE=y
+CONFIG_MUTEX_TYPES=n
+CONFIG_PRIORITY_INHERITANCE=n
+CONFIG_SEM_PREALLOCHOLDERS=0
+CONFIG_SEM_NNESTPRIO=0
+CONFIG_FDCLONE_DISABLE=n
+CONFIG_FDCLONE_STDIO=n
+CONFIG_SDCLONE_DISABLE=y
+CONFIG_NXFLAT=n
+
+#
+# The following can be used to disable categories of
+# APIs supported by the OS.  If the compiler supports
+# weak functions, then it should not be necessary to
+# disable functions unless you want to restrict usage
+# of those APIs.
+#
+# There are certain dependency relationships in these
+# features.
+#
+# o mq_notify logic depends on signals to awaken tasks
+#   waiting for queues to become full or empty.
+# o pthread_condtimedwait() depends on signals to wake
+#   up waiting tasks.
+#
+CONFIG_DISABLE_CLOCK=n
+CONFIG_DISABLE_POSIX_TIMERS=n
+CONFIG_DISABLE_PTHREAD=n
+CONFIG_DISABLE_SIGNALS=n
+CONFIG_DISABLE_MQUEUE=n
+CONFIG_DISABLE_MOUNTPOINT=n
+CONFIG_DISABLE_ENVIRON=n
+CONFIG_DISABLE_POLL=y
+
+#
+# Misc libc settings
+#
+# CONFIG_NOPRINTF_FIELDWIDTH - sprintf-related logic is a
+#   little smaller if we do not support fieldwidthes
+#
+CONFIG_NOPRINTF_FIELDWIDTH=n
+
+#
+# Allow for architecture optimized implementations
+#
+# The architecture can provide optimized versions of the
+# following to improve system performance
+#
+CONFIG_ARCH_MEMCPY=n
+CONFIG_ARCH_MEMCMP=n
+CONFIG_ARCH_MEMMOVE=n
+CONFIG_ARCH_MEMSET=n
+CONFIG_ARCH_STRCMP=n
+CONFIG_ARCH_STRCPY=n
+CONFIG_ARCH_STRNCPY=n
+CONFIG_ARCH_STRLEN=n
+CONFIG_ARCH_STRNLEN=n
+CONFIG_ARCH_BZERO=n
+
+#
+# Sizes of configurable things (0 disables)
+#
+# CONFIG_MAX_TASKS - The maximum number of simultaneously
+#   active tasks.  This value must be a power of two.
+# CONFIG_MAX_TASK_ARGS - This controls the maximum number of
+#   of parameters that a task may receive (i.e., maxmum value
+#   of 'argc')
+# CONFIG_NPTHREAD_KEYS - The number of items of thread-
+#   specific data that can be retained
+# CONFIG_NFILE_DESCRIPTORS - The maximum number of file
+#   descriptors (one for each open)
+# CONFIG_NFILE_STREAMS - The maximum number of streams that
+#   can be fopen'ed
+# CONFIG_NAME_MAX - The maximum size of a file name.
+# CONFIG_STDIO_BUFFER_SIZE - Size of the buffer to allocate
+#   on fopen. (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_NUNGET_CHARS - Number of characters that can be
+#   buffered by ungetc() (Only if CONFIG_NFILE_STREAMS > 0)
+# CONFIG_PREALLOC_MQ_MSGS - The number of pre-allocated message
+#   structures.  The system manages a pool of preallocated
+#   message structures to minimize dynamic allocations
+# CONFIG_MQ_MAXMSGSIZE - Message structures are allocated with
+#   a fixed payload size given by this settin (does not include
+#   other message structure overhead.
+# CONFIG_MAX_WDOGPARMS - Maximum number of parameters that
+#   can be passed to a watchdog handler
+# CONFIG_PREALLOC_WDOGS - The number of pre-allocated watchdog
+#   structures.  The system manages a pool of preallocated
+#   watchdog structures to minimize dynamic allocations
+# CONFIG_PREALLOC_TIMERS - The number of pre-allocated POSIX
+#   timer structures.  The system manages a pool of preallocated
+#   timer structures to minimize dynamic allocations.  Set to
+#   zero for all dynamic allocations.
+#
+CONFIG_MAX_TASKS=16
+CONFIG_MAX_TASK_ARGS=4
+CONFIG_NPTHREAD_KEYS=4
+CONFIG_NFILE_DESCRIPTORS=8
+CONFIG_NFILE_STREAMS=8
+CONFIG_NAME_MAX=32
+CONFIG_STDIO_BUFFER_SIZE=256
+CONFIG_NUNGET_CHARS=2
+CONFIG_PREALLOC_MQ_MSGS=4
+CONFIG_MQ_MAXMSGSIZE=32
+CONFIG_MAX_WDOGPARMS=2
+CONFIG_PREALLOC_WDOGS=4
+CONFIG_PREALLOC_TIMERS=4
+
+#
+# Filesystem configuration
+#
+# CONFIG_FS_FAT - Enable FAT filesystem support
+# CONFIG_FAT_SECTORSIZE - Max supported sector size
+# CONFIG_FS_ROMFS - Enable ROMFS filesystem support
+CONFIG_FS_FAT=n
+CONFIG_FS_ROMFS=n
+
+#
+# SPI-based MMC/SD driver
+#
+# CONFIG_MMCSD_NSLOTS
+#   Number of MMC/SD slots supported by the driver
+# CONFIG_MMCSD_READONLY
+#   Provide read-only access (default is read/write)
+# CONFIG_MMCSD_SPICLOCK - Maximum SPI clock to drive MMC/SD card.
+#   Default is 20MHz.
+#
+CONFIG_MMCSD_NSLOTS=0
+CONFIG_MMCSD_READONLY=n
+CONFIG_MMCSD_SPICLOCK=12500000
+
+#
+# TCP/IP and UDP support via uIP
+# CONFIG_NET - Enable or disable all network features
+# CONFIG_NET_IPv6 - Build in support for IPv6
+# CONFIG_NSOCKET_DESCRIPTORS - Maximum number of socket descriptors per task/thread.
+# CONFIG_NET_SOCKOPTS - Enable or disable support for socket options
+# CONFIG_NET_BUFSIZE - uIP buffer size
+# CONFIG_NET_TCP - TCP support on or off
+# CONFIG_NET_TCP_CONNS - Maximum number of TCP connections (all tasks)
+# CONFIG_NET_TCP_READAHEAD_BUFSIZE - Size of TCP read-ahead buffers
+# CONFIG_NET_NTCP_READAHEAD_BUFFERS - Number of TCP read-ahead buffers (may be zero)
+# CONFIG_NET_TCPBACKLOG - Incoming connections pend in a backlog until
+#   accept() is called. The size of the backlog is selected when listen() is called.
+# CONFIG_NET_MAX_LISTENPORTS - Maximum number of listening TCP ports (all tasks)
+# CONFIG_NET_UDP - UDP support on or off
+# CONFIG_NET_UDP_CHECKSUMS - UDP checksums on or off
+# CONFIG_NET_UDP_CONNS - The maximum amount of concurrent UDP connections
+# CONFIG_NET_ICMP - ICMP ping response support on or off
+# CONFIG_NET_ICMP_PING - ICMP ping request support on or off
+# CONFIG_NET_PINGADDRCONF - Use "ping" packet for setting IP address
+# CONFIG_NET_STATISTICS - uIP statistics on or off
+# CONFIG_NET_RECEIVE_WINDOW - The size of the advertised receiver's window
+# CONFIG_NET_ARPTAB_SIZE - The size of the ARP table
+# CONFIG_NET_BROADCAST - Broadcast support
+# CONFIG_NET_FWCACHE_SIZE - number of packets to remember when looking for duplicates
+#
+CONFIG_NET=n
+CONFIG_NET_IPv6=n
+CONFIG_NSOCKET_DESCRIPTORS=0
+CONFIG_NET_SOCKOPTS=y
+CONFIG_NET_BUFSIZE=420
+CONFIG_NET_TCP=n
+CONFIG_NET_TCP_CONNS=40
+CONFIG_NET_MAX_LISTENPORTS=40
+CONFIG_NET_UDP=n
+CONFIG_NET_UDP_CHECKSUMS=y
+#CONFIG_NET_UDP_CONNS=10
+CONFIG_NET_ICMP=n
+CONFIG_NET_ICMP_PING=n
+#CONFIG_NET_PINGADDRCONF=0
+CONFIG_NET_STATISTICS=y
+#CONFIG_NET_RECEIVE_WINDOW=
+#CONFIG_NET_ARPTAB_SIZE=8
+CONFIG_NET_BROADCAST=n
+#CONFIG_NET_FWCACHE_SIZE=2
+
+#
+# UIP Network Utilities
+# CONFIG_NET_DHCP_LIGHT - Reduces size of DHCP
+# CONFIG_NET_RESOLV_ENTRIES - Number of resolver entries
+#
+CONFIG_NET_DHCP_LIGHT=n
+CONFIG_NET_RESOLV_ENTRIES=4
+
+#
+# Settings for examples/uip
+#
+CONFIG_EXAMPLE_UIP_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_UIP_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_UIP_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_UIP_DHCPC=n
+
+#
+# Settings for examples/nettest
+CONFIG_EXAMPLE_NETTEST_SERVER=n
+CONFIG_EXAMPLE_NETTEST_PERFORMANCE=n
+CONFIG_EXAMPLE_NETTEST_NOMAC=n
+CONFIG_EXAMPLE_NETTEST_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_EXAMPLE_NETTEST_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_EXAMPLE_NETTEST_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_EXAMPLE_NETTEST_CLIENTIP=(10<<24|0<<16|0<<8|1)
+
+#
+# Settings for examples/ostest
+#
+CONFIG_EXAMPLES_OSTEST_LOOPS=1
+CONFIG_EXAMPLES_OSTEST_STACKSIZE=2048
+CONFIG_EXAMPLES_OSTEST_NBARRIER_THREADS=3
+
+#
+# Settings for apps/nshlib
+#
+# CONFIG_NSH_FILEIOSIZE - Size of a static I/O buffer
+# CONFIG_NSH_STRERROR - Use strerror(errno)
+# CONFIG_NSH_LINELEN - Maximum length of one command line
+# CONFIG_NSH_STACKSIZE - Stack size to use for new threads.
+# CONFIG_NSH_NESTDEPTH - Max number of nested if-then[-else]-fi
+# CONFIG_NSH_DISABLESCRIPT - Disable scripting support
+# CONFIG_NSH_DISABLEBG - Disable background commands
+# CONFIG_NSH_ROMFSETC - Use startup script in /etc
+# CONFIG_NSH_CONSOLE - Use serial console front end
+# CONFIG_NSH_TELNET - Use telnetd console front end
+# CONFIG_NSH_ARCHINIT - Platform provides architecture
+#   specific initialization (nsh_archinitialize()).
+#
+# If CONFIG_NSH_TELNET is selected:
+# CONFIG_NSH_IOBUFFER_SIZE -- Telnetd I/O buffer size
+# CONFIG_NSH_DHCPC - Obtain address using DHCP
+# CONFIG_NSH_IPADDR - Provides static IP address
+# CONFIG_NSH_DRIPADDR - Provides static router IP address
+# CONFIG_NSH_NETMASK - Provides static network mask
+# CONFIG_NSH_NOMAC - Use a bogus MAC address
+#
+# If CONFIG_NSH_ROMFSETC is selected:
+# CONFIG_NSH_ROMFSMOUNTPT - ROMFS mountpoint
+# CONFIG_NSH_INITSCRIPT - Relative path to init script
+# CONFIG_NSH_ROMFSDEVNO - ROMFS RAM device minor
+# CONFIG_NSH_ROMFSSECTSIZE - ROMF sector size
+# CONFIG_NSH_FATDEVNO - FAT FS RAM device minor
+# CONFIG_NSH_FATSECTSIZE - FAT FS sector size
+# CONFIG_NSH_FATNSECTORS - FAT FS number of sectors
+# CONFIG_NSH_FATMOUNTPT - FAT FS mountpoint
+#
+CONFIG_NSH_FILEIOSIZE=512
+CONFIG_NSH_STRERROR=n
+CONFIG_NSH_LINELEN=64
+CONFIG_NSH_STACKSIZE=2048
+CONFIG_NSH_NESTDEPTH=3
+CONFIG_NSH_DISABLESCRIPT=n
+CONFIG_NSH_DISABLEBG=n
+CONFIG_NSH_ROMFSETC=n
+CONFIG_NSH_CONSOLE=y
+CONFIG_NSH_TELNET=n
+CONFIG_NSH_ARCHINIT=n
+CONFIG_NSH_IOBUFFER_SIZE=512
+CONFIG_NSH_DHCPC=n
+CONFIG_NSH_NOMAC=n
+CONFIG_NSH_IPADDR=(10<<24|0<<16|0<<8|2)
+CONFIG_NSH_DRIPADDR=(10<<24|0<<16|0<<8|1)
+CONFIG_NSH_NETMASK=(255<<24|255<<16|255<<8|0)
+CONFIG_NSH_ROMFSMOUNTPT="/etc"
+CONFIG_NSH_INITSCRIPT="init.d/rcS"
+CONFIG_NSH_ROMFSDEVNO=0
+CONFIG_NSH_ROMFSSECTSIZE=64
+CONFIG_NSH_FATDEVNO=1
+CONFIG_NSH_FATSECTSIZE=512
+CONFIG_NSH_FATNSECTORS=1024
+CONFIG_NSH_FATMOUNTPT=/tmp
+
+#
+# Architecture-specific NSH options
+#
+CONFIG_NSH_MMCSDSPIPORTNO=0
+CONFIG_NSH_MMCSDSLOTNO=0
+CONFIG_NSH_MMCSDMINOR=0
+
+#
+# Stack and heap information
+#
+# CONFIG_BOOT_RUNFROMFLASH - Some configurations support XIP
+#   operation from FLASH but must copy initialized .data sections to RAM.
+#   (should also be =n for the LM3S6432 which always runs from flash)
+# CONFIG_BOOT_COPYTORAM -  Some configurations boot in FLASH
+#   but copy themselves entirely into RAM for better performance.
+# CONFIG_CUSTOM_STACK - The up_ implementation will handle
+#   all stack operations outside of the nuttx model.
+# CONFIG_STACK_POINTER - The initial stack pointer (arm7tdmi only)
+# CONFIG_IDLETHREAD_STACKSIZE - The size of the initial stack.
+#  This is the thread that (1) performs the inital boot of the system up
+#  to the point where user_start() is spawned, and (2) there after is the
+#  IDLE thread that executes only when there is no other thread ready to
+#  run.
+# CONFIG_USERMAIN_STACKSIZE - The size of the stack to allocate
+#  for the main user thread that begins at the user_start() entry point.
+# CONFIG_PTHREAD_STACK_MIN - Minimum pthread stack size
+# CONFIG_PTHREAD_STACK_DEFAULT - Default pthread stack size
+# CONFIG_HEAP_BASE - The beginning of the heap
+# CONFIG_HEAP_SIZE - The size of the heap
+#
+CONFIG_BOOT_RUNFROMFLASH=n
+CONFIG_BOOT_COPYTORAM=n
+CONFIG_CUSTOM_STACK=n
+CONFIG_STACK_POINTER=
+CONFIG_IDLETHREAD_STACKSIZE=1024
+CONFIG_USERMAIN_STACKSIZE=2048
+CONFIG_PTHREAD_STACK_MIN=256
+CONFIG_PTHREAD_STACK_DEFAULT=2048
+CONFIG_HEAP_BASE=
+CONFIG_HEAP_SIZE=
--- a/configs/lm3s6432-s2e/ostest/ld.script
+++ b/configs/lm3s6432-s2e/ostest/ld.script
@ -0,0 +1,108 @@
+/****************************************************************************
+ * configs/lm3s6432-s2e/ostest/ld.script
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/* The LM3S6432 has 96Kb of FLASH beginning at address 0x0000:0000 and 32Kb
+ * of SRAM beginning at 0x2000:0000.
+ */
+
+MEMORY
+{
+    flash (rx) : ORIGIN = 0x00000000, LENGTH = 96K
+    sram (rwx) : ORIGIN = 0x20000000, LENGTH = 32K
+}
+
+OUTPUT_ARCH(arm)
+ENTRY(_stext)
+SECTIONS
+{
+	.text : {
+		_stext = ABSOLUTE(.);
+		*(.vectors)
+		*(.text .text.*)        
+		*(.fixup)
+		*(.gnu.warning)
+		*(.rodata .rodata.*)        
+		*(.gnu.linkonce.t.*)
+		*(.glue_7)
+		*(.glue_7t)
+		*(.got)
+		*(.gcc_except_table)
+		*(.gnu.linkonce.r.*)
+		_etext = ABSOLUTE(.);
+	} > flash
+
+	_eronly = ABSOLUTE(.);		/* See below                    */
+
+	/* The LM3S6432 has 32Kb of SRAM beginning at the following address */
+
+	.data : {
+		_sdata = ABSOLUTE(.);
+		*(.data .data.*)
+		*(.gnu.linkonce.d.*)
+		CONSTRUCTORS
+		_edata = ABSOLUTE(.);
+	} > sram AT > flash
+
+	.ARM.extab : {
+		*(.ARM.extab*)
+	} >sram
+
+	.ARM.exidx : {
+		__exidx_start = ABSOLUTE(.);
+		*(.ARM.exidx*)
+		__exidx_end = ABSOLUTE(.);
+	} >sram
+
+	.bss : {			/* BSS				*/
+		_sbss = ABSOLUTE(.);
+		*(.bss .bss.*)
+		*(.gnu.linkonce.b.*)
+		*(COMMON)
+		_ebss = ABSOLUTE(.);
+	} > sram
+					/* Stabs debugging sections.	*/
+	.stab 0 : { *(.stab) }
+	.stabstr 0 : { *(.stabstr) }
+	.stab.excl 0 : { *(.stab.excl) }
+	.stab.exclstr 0 : { *(.stab.exclstr) }
+	.stab.index 0 : { *(.stab.index) }
+	.stab.indexstr 0 : { *(.stab.indexstr) }
+	.comment 0 : { *(.comment) }
+	.debug_abbrev 0 : { *(.debug_abbrev) }
+	.debug_info 0 : { *(.debug_info) }
+	.debug_line 0 : { *(.debug_line) }
+	.debug_pubnames 0 : { *(.debug_pubnames) }
+	.debug_aranges 0 : { *(.debug_aranges) }
+}
--- a/configs/lm3s6432-s2e/ostest/setenv.sh
+++ b/configs/lm3s6432-s2e/ostest/setenv.sh
@ -0,0 +1,46 @@
+#!/bin/bash
+# configs/lm3s6432-s2e/ostest/setenv.sh
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+
+if [ "$(basename $0)" = "setenv.sh" ] ; then
+  echo "You must source this script, not run it!" 1>&2
+  exit 1
+fi
+
+if [ -z "${PATH_ORIG}" ]; then export PATH_ORIG="${PATH}"; fi
+
+WD=`pwd`
+export BUILDROOT_BIN="${WD}/../buildroot/build_arm_nofpu/staging_dir/bin"
+export PATH="${BUILDROOT_BIN}:/sbin:/usr/sbin:${PATH_ORIG}"
+
+echo "PATH : ${PATH}"
--- a/configs/lm3s6432-s2e/src/Makefile
+++ b/configs/lm3s6432-s2e/src/Makefile
@ -0,0 +1,87 @@
+############################################################################
+# configs/lm3s6432-s2e/src/Makefile
+#
+#   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+#   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# 1. Redistributions of source code must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+#    notice, this list of conditions and the following disclaimer in
+#    the documentation and/or other materials provided with the
+#    distribution.
+# 3. Neither the name NuttX nor the names of its contributors may be
+#    used to endorse or promote products derived from this software
+#    without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+# FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+# COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+# BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+# OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+# AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+# LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+# ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+# POSSIBILITY OF SUCH DAMAGE.
+#
+############################################################################
+
+-include $(TOPDIR)/Make.defs
+
+CFLAGS		+= -I$(TOPDIR)/sched
+
+ASRCS		= 
+AOBJS		= $(ASRCS:.S=$(OBJEXT))
+CSRCS		= up_boot.c up_leds.c up_ethernet.c up_ssi.c
+ifeq ($(CONFIG_NSH_ARCHINIT),y)
+CSRCS		+= up_nsh.c
+endif
+
+COBJS		= $(CSRCS:.c=$(OBJEXT))
+
+SRCS		= $(ASRCS) $(CSRCS)
+OBJS		= $(AOBJS) $(COBJS)
+
+ARCH_SRCDIR	= $(TOPDIR)/arch/$(CONFIG_ARCH)/src
+ifeq ($(WINTOOL),y)
+  CFLAGS	+= -I "${shell cygpath -w $(ARCH_SRCDIR)/chip}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/common}" \
+  		   -I "${shell cygpath -w $(ARCH_SRCDIR)/armv7-m}"
+else
+  CFLAGS	+= -I$(ARCH_SRCDIR)/chip -I$(ARCH_SRCDIR)/common -I$(ARCH_SRCDIR)/armv7-m
+endif
+
+all: libboard$(LIBEXT)
+
+$(AOBJS): %$(OBJEXT): %.S
+	$(call ASSEMBLE, $<, $@)
+
+$(COBJS) $(LINKOBJS): %$(OBJEXT): %.c
+	$(call COMPILE, $<, $@)
+
+libboard$(LIBEXT): $(OBJS)
+	@( for obj in $(OBJS) ; do \
+		$(call ARCHIVE, $@, $${obj}); \
+	done ; )
+
+.depend: Makefile $(SRCS)
+	@$(MKDEP) $(CC) -- $(CFLAGS) -- $(SRCS) >Make.dep
+	@touch $@
+
+depend: .depend
+
+clean:
+	@rm -f libboard$(LIBEXT) *~ .*.swp
+	$(call CLEAN)
+
+distclean: clean
+	@rm -f Make.dep .depend
+
+-include Make.dep
--- a/configs/lm3s6432-s2e/src/README.txt
+++ b/configs/lm3s6432-s2e/src/README.txt
@ -0,0 +1 @@
+This directory contains drivers unique to the Stellaris MDL-S2E Reference Design.
--- a/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h
+++ b/configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h
@ -0,0 +1,125 @@
+/************************************************************************************
+ * configs/lm3s6432-s2e/src/lm3s6432s2e_internal.h
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+#ifndef __CONFIGS_LM3S6432_S2E_SRC_LM3S6432S2E_INTERNAL_H
+#define __CONFIGS_LM3S6432_S2E_SRC_LM3S6432S2E_INTERNAL_H
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+#include <nuttx/compiler.h>
+
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* How many SSI modules does this chip support? The LM3S6432 supports 1 SSI
+ * module (others may support more than 2 -- in such case, the following must be
+ * expanded).
+ */
+
+#if LM3S_NSSI == 0
+#  undef CONFIG_SSI0_DISABLE
+#  define CONFIG_SSI0_DISABLE 1
+#endif
+#undef CONFIG_SSI1_DISABLE
+#define CONFIG_SSI1_DISABLE 1
+
+/* LM3S6432 MDL-S2E *****************************************************************/
+
+/* GPIO Usage
+ *
+ * PIN SIGNAL            S2E Function
+ * --- ----------------- ---------------------------------------
+ *  L3 PA0/U0RX          Virtual COM port receive
+ *  M3 PA1/U0TX          Virtual COM port transmit
+ * E12 PB0/U0CTS         Virtual COM port CTS
+ * D12 PB1/U0RTS         Virtual COM port RTS
+ *  L5 PA4/SPIRX         SPI receive
+ *  M5 PA5/SPITX         SPI transmit
+ *  H2 PD2/U1RX          Virtual COM port receive
+ *  H1 PD3/U1TX          Virtual COM port transmit
+ *  L4 PA3/U1CTS/SPICLK  Virtual COM port CTS
+ *  M4 PA2/U1RTS/SPISEL  Virtual COM port RTS
+ * J11 PF0/LED1          Ethernet LED1 (green)
+ * J12 PF1/LED0          Ethernet LED0 (yellow)
+ * C11 PB2               Transciever #INVALID
+ * C12 PB3               Transciever #ENABLE
+ *  A6 PB4               Transciever ON
+ *  B7 PB5               Transciever #OFF
+ */
+
+/* GPIO for LEDs:
+ * - PF0: User LED
+ */
+
+#define LED1_GPIO     (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE  | GPIO_PORTF | 2)
+#define LED0_GPIO     (GPIO_FUNC_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORTF | 3)
+
+/* GPIO for SSI0 select
+ */
+#define SSICS_GPIO    (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE | GPIO_PORTA | 3)
+
+/* GPIOs for the RS-232 transciever enable/disable.
+ * Default state for these enables the transciever.
+ */
+#define XCVR_INV_GPIO (GPIO_FUNC_INPUT | GPIO_PORTB | 2)
+#define XCVR_ENA_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ZERO | GPIO_PORTB | 3)
+#define XCVR_ON_GPIO  (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE  | GPIO_PORTB | 4)
+#define XCVR_OFF_GPIO (GPIO_FUNC_OUTPUT | GPIO_VALUE_ONE  | GPIO_PORTB | 5)
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+#ifndef __ASSEMBLY__
+
+/************************************************************************************
+ * Name: lm3s_ssiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the MDL-S2E.
+ *
+ ************************************************************************************/
+
+extern void weak_function lm3s_ssiinitialize(void);
+
+#endif /* __ASSEMBLY__ */
+#endif /* __CONFIGS_LM3S6432_S2E_SRC_LM3S6432S2E_INTERNAL_H */
+
--- a/configs/lm3s6432-s2e/src/up_boot.c
+++ b/configs/lm3s6432-s2e/src/up_boot.c
@ -0,0 +1,103 @@
+/************************************************************************************
+ * configs/lm3s6432-s2e/src/up_boot.c
+ * arch/arm/src/board/up_boot.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "up_internal.h"
+#include "lm3s_internal.h"
+#include "lm3s6432s2e_internal.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+#if !defined(CONFIG_UART1_DISABLE) && !defined(CONFIG_SSI0_DISABLE)
+#  error Only one of UART1 and SSI0 can be enabled on this board.
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lm3s_boardinitialize
+ *
+ * Description:
+ *   All LM3S architectures must provide the following entry point.  This entry point
+ *   is called early in the intitialization -- after all memory has been configured
+ *   and mapped but before any devices have been initialized.
+ ************************************************************************************/
+
+void lm3s_boardinitialize(void)
+{
+  /* Configure SPI chip selects if 1) SSI is not disabled, and 2) the weak function
+   * lm3s_ssiinitialize() has been brought into the link.
+   */
+
+#if !defined(CONFIG_SSI0_DISABLE)
+  if (lm3s_ssiinitialize)
+    {
+      lm3s_ssiinitialize();
+    }
+#endif
+
+  /* Configure on-board LEDs if LED support has been selected. */
+
+#ifdef CONFIG_ARCH_LEDS
+  up_ledinit();
+#endif
+
+  /* Configure serial transciever */
+  
+  lm3s_configgpio(XCVR_INV_GPIO);
+  lm3s_configgpio(XCVR_ENA_GPIO);
+  lm3s_configgpio(XCVR_ON_GPIO);
+  lm3s_configgpio(XCVR_OFF_GPIO);
+}
--- a/configs/lm3s6432-s2e/src/up_ethernet.c
+++ b/configs/lm3s6432-s2e/src/up_ethernet.c
@ -0,0 +1,98 @@
+/************************************************************************************
+ * configs/lm3s6432-s3e/src/up_ethernet.c
+ * arch/arm/src/board/up_ethernet.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <debug.h>
+#include <assert.h>
+
+#include <arch/board/board.h>
+#include <net/ethernet.h>
+
+#include "up_arch.h"
+#include "chip.h"
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lm3s_ethernetmac
+ *
+ * Description:
+ *   For the Ethernet Eval Kits, the MAC address will be stored in the non-volatile
+ *   USER0 and USER1 registers.  If CONFIG_LM3S_BOARDMAC is defined, this function
+ *   will obtain the MAC address from these registers.
+ *
+ ************************************************************************************/
+
+#ifdef CONFIG_LM3S_BOARDMAC
+void lm3s_ethernetmac(struct ether_addr *ethaddr)
+{
+  uint32_t user0;
+  uint32_t user1;
+
+  /* Get the current value of the user registers */
+
+  user0 = getreg32(LM3S_FLASH_USERREG0);
+  user1 = getreg32(LM3S_FLASH_USERREG1);
+
+  nlldbg("user: %06x:%06x\n", user1 & 0x00ffffff, user0 & 0x00ffffff);
+  DEBUGASSERT(user0 != 0xffffffff && user1 != 0xffffffff);
+
+  /* Re-format that MAC address the way that uIP expects to see it */
+
+  ethaddr->ether_addr_octet[0] = ((user0 >>  0) & 0xff);
+  ethaddr->ether_addr_octet[1] = ((user0 >>  8) & 0xff);
+  ethaddr->ether_addr_octet[2] = ((user0 >> 16) & 0xff);
+  ethaddr->ether_addr_octet[3] = ((user1 >>  0) & 0xff);
+  ethaddr->ether_addr_octet[4] = ((user1 >>  8) & 0xff);
+  ethaddr->ether_addr_octet[5] = ((user1 >> 16) & 0xff);
+}
+#endif
--- a/configs/lm3s6432-s2e/src/up_leds.c
+++ b/configs/lm3s6432-s2e/src/up_leds.c
@ -0,0 +1,168 @@
+/****************************************************************************
+ * configs/lm3s6432-s2e/src/up_leds.c
+ * arch/arm/src/board/up_leds.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdbool.h>
+#include <debug.h>
+
+#include <arch/board/board.h>
+
+#include "chip.h"
+#include "up_arch.h"
+#include "up_internal.h"
+#include "lm3s_internal.h"
+#include "lm3s6432s2e_internal.h"
+
+/****************************************************************************
+ * Definitions
+ ****************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG with
+ * CONFIG_DEBUG_VERBOSE too)
+ */
+
+#undef LED_DEBUG  /* Define to enable debug */
+
+#ifdef LED_DEBUG
+#  define leddbg  lldbg
+#  define ledvdbg llvdbg
+#else
+#  define leddbg(x...)
+#  define ledvdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#ifdef LED_DEBUG
+#  define led_dumpgpio(m) lm3s_dumpgpio(LED_GPIO, m)
+#else
+#  define led_dumpgpio(m)
+#endif
+
+/****************************************************************************
+ * Private Data
+ ****************************************************************************/
+
+/****************************************************************************
+ * Private Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+static uint8_t g_nest;
+
+/****************************************************************************
+ * Name: up_ledinit
+ ****************************************************************************/
+
+#ifdef CONFIG_ARCH_LEDS
+void up_ledinit(void)
+{
+  leddbg("Initializing\n");
+
+  /* Configure Port F, Bit 2 as an output, initial value=OFF */
+
+  led_dumpgpio("up_ledinit before lm3s_configgpio()");
+  lm3s_configgpio(LED0_GPIO);
+  lm3s_configgpio(LED1_GPIO);
+  led_dumpgpio("up_ledinit after lm3s_configgpio()");
+  g_nest = 0;
+}
+
+/****************************************************************************
+ * Name: up_ledon
+ ****************************************************************************/
+
+void up_ledon(int led)
+{
+  switch (led)
+    {
+      case LED_STARTED:
+      case LED_HEAPALLOCATE:
+      default:
+        break;
+
+      case LED_INIRQ:
+      case LED_SIGNAL:
+      case LED_ASSERTION:
+      case LED_PANIC:
+        g_nest++;
+      case LED_IRQSENABLED:
+      case LED_STACKCREATED:
+        led_dumpgpio("up_ledon: before lm3s_gpiowrite()");
+        lm3s_gpiowrite(LED1_GPIO, false);
+        led_dumpgpio("up_ledon: after lm3s_gpiowrite()");
+        break;
+    }
+}
+
+/****************************************************************************
+ * Name: up_ledoff
+ ****************************************************************************/
+
+void up_ledoff(int led)
+{
+  switch (led)
+    {
+      case LED_IRQSENABLED:
+      case LED_STACKCREATED:
+      case LED_STARTED:
+      case LED_HEAPALLOCATE:
+      default:
+        break;
+
+      case LED_INIRQ:
+      case LED_SIGNAL:
+      case LED_ASSERTION:
+      case LED_PANIC:
+        if (--g_nest <= 0)
+          {
+            led_dumpgpio("up_ledoff: before lm3s_gpiowrite()");
+            lm3s_gpiowrite(LED1_GPIO, true);
+            led_dumpgpio("up_ledoff: after lm3s_gpiowrite()");
+          }
+        break;
+    }
+}
+
+#endif /* CONFIG_ARCH_LEDS */
--- a/configs/lm3s6432-s2e/src/up_nsh.c
+++ b/configs/lm3s6432-s2e/src/up_nsh.c
@ -0,0 +1,87 @@
+/****************************************************************************
+ * config/lm3s6432-s2e/src/up_nsh.c
+ * arch/arm/src/board/up_nsh.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ****************************************************************************/
+
+/****************************************************************************
+ * Included Files
+ ****************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdio.h>
+#include <debug.h>
+#include <errno.h>
+
+#include <nuttx/spi.h>
+#include <nuttx/mmcsd.h>
+
+/****************************************************************************
+ * Pre-Processor Definitions
+ ****************************************************************************/
+
+/* Configuration ************************************************************/
+
+/* Debug ********************************************************************/
+
+#ifdef CONFIG_CPP_HAVE_VARARGS
+#  ifdef CONFIG_DEBUG
+#    define message(...) lib_lowprintf(__VA_ARGS__)
+#  else
+#    define message(...) printf(__VA_ARGS__)
+#  endif
+#else
+#  ifdef CONFIG_DEBUG
+#    define message lib_lowprintf
+#  else
+#    define message printf
+#  endif
+#endif
+
+/****************************************************************************
+ * Public Functions
+ ****************************************************************************/
+
+/****************************************************************************
+ * Name: nsh_archinitialize
+ *
+ * Description:
+ *   Perform architecture specific initialization
+ *
+ ****************************************************************************/
+
+int nsh_archinitialize(void)
+{
+  return OK;
+}
--- a/configs/lm3s6432-s2e/src/up_ssi.c
+++ b/configs/lm3s6432-s2e/src/up_ssi.c
@ -0,0 +1,151 @@
+/************************************************************************************
+ * configs/lm3s6432-s2e/src/up_ssi.c
+ * arch/arm/src/board/up_ssi.c
+ *
+ *   Copyright (C) 2010 Gregory Nutt. All rights reserved.
+ *   Author: Gregory Nutt <spudmonkey@racsa.co.cr>
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ * 3. Neither the name NuttX nor the names of its contributors may be
+ *    used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
+ * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ *
+ ************************************************************************************/
+
+/************************************************************************************
+ * Included Files
+ ************************************************************************************/
+
+#include <nuttx/config.h>
+
+#include <stdint.h>
+#include <stdbool.h>
+#include <debug.h>
+
+#include <nuttx/spi.h>
+#include <arch/board/board.h>
+
+#include "up_arch.h"
+#include "chip.h"
+#include "lm3s_internal.h"
+#include "lm3s6432s2e_internal.h"
+
+#if !defined(CONFIG_SSI0_DISABLE)
+
+/************************************************************************************
+ * Definitions
+ ************************************************************************************/
+
+/* Enables debug output from this file (needs CONFIG_DEBUG too) */
+
+#undef SSI_DEBUG   /* Define to enable debug */
+#undef SSI_VERBOSE /* Define to enable verbose debug */
+
+#ifdef SSI_DEBUG
+#  define ssidbg  lldbg
+#  ifdef SSI_VERBOSE
+#    define ssivdbg lldbg
+#  else
+#    define ssivdbg(x...)
+#  endif
+#else
+#  undef SSI_VERBOSE
+#  define ssidbg(x...)
+#  define ssivdbg(x...)
+#endif
+
+/* Dump GPIO registers */
+
+#ifdef SSI_VERBOSE
+#  define ssi_dumpgpio(m) lm3s_dumpgpio(SDCCS_GPIO, m)
+#else
+#  define ssi_dumpgpio(m)
+#endif
+
+/************************************************************************************
+ * Private Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Public Functions
+ ************************************************************************************/
+
+/************************************************************************************
+ * Name: lm3s_ssiinitialize
+ *
+ * Description:
+ *   Called to configure SPI chip select GPIO pins for the MDL-S2E.
+ *
+ ************************************************************************************/
+
+void weak_function lm3s_ssiinitialize(void)
+{
+  /* Configure the SPI CS GPIO */
+
+  ssi_dumpgpio("lm3s_ssiinitialize() Entry)");
+  lm3s_configgpio(SSICS_GPIO);
+  ssi_dumpgpio("lm3s_ssiinitialize() Exit");
+}
+
+/****************************************************************************
+ * The external functions, lm3s_spiselect and lm3s_spistatus must be provided
+ * by board-specific logic.  The are implementations of the select and status
+ * methods SPI interface defined by struct spi_ops_s (see include/nuttx/spi.h).
+ * All othermethods (including up_spiinitialize()) are provided by common
+ * logic.  To use this common SPI logic on your board:
+ *
+ *   1. Provide lm3s_spiselect() and lm3s_spistatus() functions in your
+ *      board-specific logic.  This function will perform chip selection and
+ *      status operations using GPIOs in the way your board is configured.
+ *   2. Add a call to up_spiinitialize() in your low level initialization
+ *      logic
+ *   3. The handle returned by up_spiinitialize() may then be used to bind the
+ *      SPI driver to higher level logic (e.g., calling 
+ *      mmcsd_spislotinitialize(), for example, will bind the SPI driver to
+ *      the SPI MMC/SD driver).
+ *
+ ****************************************************************************/
+
+void lm3s_spiselect(FAR struct spi_dev_s *dev, enum spi_dev_e devid, bool selected)
+{
+  ssidbg("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
+  ssi_dumpgpio("lm3s_spiselect() Entry");
+
+  if (devid == SPIDEV_MMCSD)
+    {
+      /* Assert the CS pin to the card */
+
+      lm3s_gpiowrite(SDCCS_GPIO, !selected);
+    }
+  ssi_dumpgpio("lm3s_spiselect() Exit");
+}
+
+uint8_t lm3s_spistatus(FAR struct spi_dev_s *dev, enum spi_dev_e devid)
+{
+  ssidbg("Returning SPI_STATUS_PRESENT\n");
+  return SPI_STATUS_PRESENT;
+}
+
+#endif /* !CONFIG_SSI0_DISABLE || !CONFIG_SSI1_DISABLE */
				`@ -0,0 +1 @@`
				`This directory contains header files unique to the Stellaris MDL-S2E Reference Design.`
				`@ -0,0 +1 @@`
				`This directory contains drivers unique to the Stellaris MDL-S2E Reference Design.`