Merge remote-tracking branch 'origin/master' into ieee802154

arch/arm/src/lpc31xx/lpc31_spi.c

@@ -491,15 +491,15 @@ static void spi_select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
    * be in board specific code..... */
   switch (devid)
     {
-    case SPIDEV_FLASH:
+    case SPIDEV_FLASH(0):
       slave = 0;
       break;
 
-    case SPIDEV_MMCSD:
+    case SPIDEV_MMCSD(0):
       slave = 1;
       break;
 
-    case SPIDEV_ETHERNET:
+    case SPIDEV_ETHERNET(0):
       slave = 2;
       break;
 

arch/sim/src/up_spiflash.c

@@ -362,7 +362,7 @@ static void spiflash_select(FAR struct spi_dev_s *dev, uint32_t devid,
 {
   FAR struct sim_spiflashdev_s *priv = (FAR struct sim_spiflashdev_s *)dev;
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       priv->selected = selected;
 

configs/arduino-due/src/sam_mmcsd.c

@@ -145,7 +145,7 @@ static int spi_cmddata(FAR struct spi_bitbang_s *priv, uint32_t devid,
 static void spi_select(FAR struct spi_bitbang_s *priv, uint32_t devid,
                        bool selected)
 {
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       if (selected)
         {
@@ -175,7 +175,7 @@ static void spi_select(FAR struct spi_bitbang_s *priv, uint32_t devid,
 
 static uint8_t spi_status(FAR struct spi_bitbang_s *priv, uint32_t devid)
 {
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       return SPI_STATUS_PRESENT;
     }

configs/clicker2-stm32/src/stm32_spi.c

@@ -139,7 +139,7 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   switch(devid)
   {
 #ifdef CONFIG_IEEE802154_MRF24J40
-    case SPIDEV_IEEE802154:
+    case SPIDEV_IEEE802154(0):
       /* Set the GPIO low to select and high to de-select */
       stm32_gpiowrite(GPIO_MB1_CS, !selected);
       break;

configs/cloudctrl/src/stm32_spi.c

@@ -119,7 +119,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
   /* SPI1 connects to the SD CARD and to the SPI FLASH */
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       /* Set the GPIO low to select and high to de-select */
 

configs/eagle100/src/lm_ssi.c

@@ -110,7 +110,7 @@ void weak_function lm_ssidev_initialize(void)
 void tiva_ssiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert the CS pin to the card */
 

configs/ekk-lm3s9b96/src/lm_ssi.c

@@ -111,14 +111,14 @@ void tiva_ssiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssi_dumpgpio("tiva_ssiselect() Entry");
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert the CS pin to the card */
 
       tiva_gpiowrite(SDCCS_GPIO, !selected);
     }
 #ifdef CONFIG_NX_LCDDRIVER
-  else if (devid == SPIDEV_DISPLAY)
+  else if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the display */
 

configs/fire-stm32v2/src/stm32_spi.c

@@ -145,14 +145,14 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   else
 #endif
 #ifdef CONFIG_ENC28J60
-  if (devid == SPIDEV_ETHERNET)
+  if (devid == SPIDEV_ETHERNET(0))
     {
       /* Set the GPIO low to select and high to de-select */
 
       stm32_gpiowrite(GPIO_ENC28J60_CS, !selected);
     }
 #else
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       /* Set the GPIO low to select and high to de-select */
 

configs/freedom-kl25z/src/kl_spi.c

@@ -146,7 +146,7 @@ void kl_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
            (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_ADXL345_SPI
-  if (devid == SPIDEV_ACCELEROMETER)
+  if (devid == SPIDEV_ACCELEROMETER(0))
     {
       /* Active low */
 
@@ -155,7 +155,7 @@ void kl_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #endif
 
 #if defined(CONFIG_WL_CC3000)
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       kl_gpiowrite(GPIO_WIFI_CS, !selected);
     }

configs/hymini-stm32v/src/stm32_spi.c

@@ -111,7 +111,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
-  if (devid == SPIDEV_TOUCHSCREEN)
+  if (devid == SPIDEV_TOUCHSCREEN(0))
   {
     /* Set the GPIO low to select and high to de-select */
 

configs/lm3s6432-s2e/src/lm_ssi.c

@@ -110,7 +110,7 @@ void tiva_ssiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssi_dumpgpio("tiva_ssiselect() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert the CS pin to the card */
 

configs/lm3s6965-ek/src/lm_oled.c

@@ -164,7 +164,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
 
 int tiva_ssicmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Set GPIO to 1 for data, 0 for command */
 

configs/lm3s6965-ek/src/lm_ssi.c

@@ -115,14 +115,14 @@ void tiva_ssiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssi_dumpgpio("tiva_ssiselect() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert the CS pin to the card */
 
       tiva_gpiowrite(SDCCS_GPIO, !selected);
     }
 #ifdef CONFIG_NX_LCDDRIVER
-  else if (devid == SPIDEV_DISPLAY)
+  else if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the display */
 

configs/lm3s8962-ek/src/lm_oled.c

@@ -162,7 +162,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
 
 int tiva_ssicmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Set GPIO to 1 for data, 0 for command */
 

configs/lm3s8962-ek/src/lm_ssi.c

@@ -115,14 +115,14 @@ void tiva_ssiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssi_dumpgpio("tiva_ssiselect() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert the CS pin to the card */
 
       tiva_gpiowrite(SDCCS_GPIO, !selected);
     }
 #ifdef CONFIG_NX_LCDDRIVER
-  else if (devid == SPIDEV_DISPLAY)
+  else if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the display */
 

configs/lpcxpresso-lpc1115/src/lpc11_ssp.c

@@ -153,14 +153,14 @@ void  lpc11_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssp_dumpgpio("lpc11_ssp1select() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert/de-assert the CS pin to the card */
 
       (void)lpc11_gpiowrite(LPCXPRESSO_SD_CS, !selected);
     }
 #ifdef CONFIG_NX_LCDDRIVER
-  else if (devid == SPIDEV_DISPLAY)
+  else if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the OLED display */
 
@@ -172,7 +172,7 @@ void  lpc11_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 uint8_t lpc11_ssp1status(FAR struct spi_dev_s *dev, uint32_t devid)
 {
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Read the state of the card-detect bit */
 

configs/lpcxpresso-lpc1768/src/lpc17_oled.c

@@ -161,7 +161,7 @@ FAR struct lcd_dev_s *board_graphics_setup(unsigned int devno)
 
 int lpc17_ssp1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Set GPIO to 1 for data, 0 for command */
 

configs/lpcxpresso-lpc1768/src/lpc17_ssp.c

@@ -153,14 +153,14 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssp_dumpgpio("lpc17_ssp1select() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert/de-assert the CS pin to the card */
 
       (void)lpc17_gpiowrite(LPCXPRESSO_SD_CS, !selected);
     }
 #ifdef CONFIG_NX_LCDDRIVER
-  else if (devid == SPIDEV_DISPLAY)
+  else if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the OLED display */
 
@@ -172,7 +172,7 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, uint32_t devid)
 {
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Read the state of the card-detect bit */
 

configs/maple/src/stm32_spi.c

@@ -110,7 +110,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #  if defined(CONFIG_LCD_SHARP_MEMLCD)
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       stm32_gpiowrite(GPIO_MEMLCD_CS, selected);
     }

configs/mikroe-stm32f4/src/stm32_spi.c

@@ -127,11 +127,11 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #if defined(CONFIG_VS1053)
-  if (devid == SPIDEV_AUDIO_DATA)
+  if (devid == SPIDEV_AUDIO_DATA(0))
     {
       stm32_gpiowrite(GPIO_CS_MP3_DATA, !selected);
     }
-  else if (devid == SPIDEV_AUDIO_CTRL)
+  else if (devid == SPIDEV_AUDIO_CTRL(0))
     {
       stm32_gpiowrite(GPIO_CS_MP3_CMD, !selected);
     }
@@ -139,7 +139,7 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 #endif
 
 #if defined(CONFIG_MMCSD)
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32_gpiowrite(GPIO_CS_MMCSD, !selected);
     }
@@ -147,7 +147,7 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 #endif
 
 #if defined(CONFIG_MTD_M25P)
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       stm32_gpiowrite(GPIO_CS_FLASH, !selected);
     }
@@ -156,7 +156,7 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
   /* Must be the expansion header device */
 
-  if (devid == SPIDEV_EXPANDER)
+  if (devid == SPIDEV_EXPANDER(0))
     {
       stm32_gpiowrite(GPIO_CS_EXP_SPI3, !selected);
     }
@@ -167,7 +167,7 @@ uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
   uint8_t ret = 0;
 
 #if defined(CONFIG_MMCSD)
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* A low value indicates the card is present */
 

configs/mirtoo/src/pic32_spi2.c

@@ -159,11 +159,11 @@ void  pic32mx_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selecte
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       pic32mx_gpiowrite(GPIO_SST25VF032B_CS, !selected);
     }
-  else if (devid == SPIDEV_MUX)
+  else if (devid == SPIDEV_MUX(0))
     {
       pic32mx_gpiowrite(GPIO_PGA117_CS, !selected);
     }

configs/nucleo-f303re/src/stm32_spi.c

@@ -109,7 +109,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #if defined(CONFIG_LCD_SSD1351)
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       stm32_gpiowrite(GPIO_OLED_CS, !selected);
     }
@@ -176,7 +176,7 @@ int stm32_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid,
                       bool cmd)
 {
 #ifdef CONFIG_LCD_SSD1351
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       (void)stm32_gpiowrite(GPIO_OLED_DC, !cmd);
       return OK;

configs/nucleo-f4x1re/src/stm32_spi.c

@@ -146,14 +146,14 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_SPI_CS_WIFI, !selected);
     }
   else
 #endif
 #ifdef HAVE_MMCSD
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32_gpiowrite(GPIO_SPI_CS_SD_CARD, !selected);
     }
@@ -172,7 +172,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_WIFI_CS, !selected);
     }

configs/nucleo-l476rg/src/stm32_spi.c

@@ -146,14 +146,14 @@ void stm32l4_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32l4_gpiowrite(GPIO_SPI_CS_WIFI, !selected);
     }
   else
 #endif
 #ifdef HAVE_MMCSD
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32l4_gpiowrite(GPIO_SPI_CS_SD_CARD, !selected);
     }
@@ -172,7 +172,7 @@ void stm32l4_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32l4_gpiowrite(GPIO_WIFI_CS, !selected);
     }

configs/olimex-lpc1766stk/src/lpc17_ssp.c

@@ -266,7 +266,7 @@ void weak_function lpc1766stk_sspdev_initialize(void)
 void  lpc17_ssp0select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert/de-assert the CS pin to the card */
 
@@ -287,7 +287,7 @@ uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, uint32_t devid)
 void  lpc17_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert/de-assert the CS pin to the card */
 

configs/olimex-stm32-p107/src/stm32_spi.c

@@ -112,7 +112,7 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
-  if (devid == SPIDEV_ETHERNET)
+  if (devid == SPIDEV_ETHERNET(0))
     {
       /* Set the GPIO low to select and high to de-select */
 

configs/olimexino-stm32/src/stm32_spi.c

@@ -110,7 +110,7 @@ void weak_function stm32_spidev_initialize(void)
 void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
-  if (devid == SPIDEV_USER)
+  if (devid == SPIDEV_USER(0))
     {
       stm32_gpiowrite(USER_CSn, !selected);
     }
@@ -127,7 +127,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 #if defined(CONFIG_MMCSD)
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32_gpiowrite(MMCSD_CSn, !selected);
     }

configs/open1788/src/lpc17_ssp.c

@@ -146,7 +146,7 @@ uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, uint32_t devid)
 void  lpc17_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
-  if (devid == SPIDEV_TOUCHSCREEN)
+  if (devid == SPIDEV_TOUCHSCREEN(0))
     {
       /* Assert/de-assert the CS pin to the touchscreen */
 

configs/pic32mx7mmb/src/pic32_spi.c

@@ -134,7 +134,7 @@ void  pic32mx_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selecte
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       pic32mx_gpiowrite(GPIO_SD_CS, !selected);
     }
@@ -146,7 +146,7 @@ uint8_t pic32mx_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
 
   /* Card detect active low. */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       if (!pic32mx_gpioread(GPIO_SD_CD))
         {

configs/sam3u-ek/src/sam_spi.c

@@ -149,7 +149,7 @@ void sam_spi0select(uint32_t devid, bool selected)
    */
 
 #if defined(CONFIG_INPUT) && defined(CONFIG_INPUT_ADS7843E)
-  if (devid == SPIDEV_TOUCHSCREEN)
+  if (devid == SPIDEV_TOUCHSCREEN(0))
     {
       sam_gpiowrite(GPIO_TSC_NPCS2, !selected);
     }

configs/sam4e-ek/src/sam_spi.c

@@ -153,7 +153,7 @@ void sam_spi0select(uint32_t devid, bool selected)
        * manually and hold it low throughout the SPI transfer.
        */
 
-      case SPIDEV_TOUCHSCREEN:
+      case SPIDEV_TOUCHSCREEN(0):
         sam_gpiowrite(GPIO_TSC_CS, !selected);
         break;
 #endif
@@ -161,7 +161,7 @@ void sam_spi0select(uint32_t devid, bool selected)
 #if defined(CONFIG_MTD_AT25)
        /* The AT25 Serial FLASH connects using NPCS3 (PA5). */
 
-      case SPIDEV_FLASH:
+      case SPIDEV_FLASH(0):
         sam_gpiowrite(GPIO_FLASH_CS, !selected);
         break;
 #endif

configs/sam4l-xplained/src/sam_spi.c

@@ -145,7 +145,7 @@ void sam_spi0select(uint32_t devid, bool selected)
 #ifdef CONFIG_SAM4L_XPLAINED_IOMODULE
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -160,7 +160,7 @@ void sam_spi0select(uint32_t devid, bool selected)
 #ifdef CONFIG_SAM4L_XPLAINED_OLED1MODULE
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -190,7 +190,7 @@ uint8_t sam_spi0status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAM4L_XPLAINED_IOMODULE
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -234,7 +234,7 @@ uint8_t sam_spi0status(FAR struct spi_dev_s *dev, uint32_t devid)
 int sam_spic0mddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAM4L_XPLAINED_OLED1MODULE
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.

configs/sama5d3-xplained/src/sam_spi.c

@@ -145,7 +145,7 @@ void sam_spi0select(uint32_t devid, bool selected)
 #ifdef CONFIG_MTD_AT25
   /* The AT25 serial FLASH connects using NPCS0 */
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       sam_piowrite(PIO_AT25_NPCS0, !selected);
     }

configs/sama5d3x-ek/src/sam_spi.c

@@ -145,7 +145,7 @@ void sam_spi0select(uint32_t devid, bool selected)
 #ifdef CONFIG_MTD_AT25
   /* The AT25 serial FLASH connects using NPCS0 */
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       sam_piowrite(PIO_AT25_NPCS0, !selected);
     }

configs/sama5d4-ek/src/sam_spi.c

@@ -145,7 +145,7 @@ void sam_spi0select(uint32_t devid, bool selected)
 #ifdef CONFIG_MTD_AT25
   /* The AT25 serial FLASH connects using NPCS0 */
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       sam_piowrite(PIO_AT25_NPCS0, !selected);
     }

configs/samd20-xplained/src/sam_spi.c

@@ -154,7 +154,7 @@ void sam_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD20_XPLAINED_IOMODULE_EXT1
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -165,7 +165,7 @@ void sam_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD20_XPLAINED_OLED1MODULE_EXT1
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -182,7 +182,7 @@ void sam_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD20_XPLAINED_IOMODULE_EXT2
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -193,7 +193,7 @@ void sam_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD20_XPLAINED_OLED1MODULE_EXT2
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -254,7 +254,7 @@ uint8_t sam_spi0status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAMD20_XPLAINED_IOMODULE_EXT1
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -277,7 +277,7 @@ uint8_t sam_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAMD20_XPLAINED_IOMODULE_EXT2
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -350,7 +350,7 @@ uint8_t sam_spi5status(FAR struct spi_dev_s *dev, uint32_t devid)
 int sam_spi0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAMD20_XPLAINED_OLED1MODULE_EXT1
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.
@@ -371,7 +371,7 @@ int sam_spi0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 int sam_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAMD20_XPLAINED_OLED1MODULE_EXT2
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.

configs/samd21-xplained/src/sam_spi.c

@@ -154,7 +154,7 @@ void sam_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD21_XPLAINED_IOMODULE_EXT1
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -165,7 +165,7 @@ void sam_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD21_XPLAINED_OLED1MODULE_EXT1
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -182,7 +182,7 @@ void sam_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD21_XPLAINED_IOMODULE_EXT2
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -193,7 +193,7 @@ void sam_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAMD21_XPLAINED_OLED1MODULE_EXT2
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -254,7 +254,7 @@ uint8_t sam_spi0status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAMD21_XPLAINED_IOMODULE_EXT1
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -277,7 +277,7 @@ uint8_t sam_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAMD21_XPLAINED_IOMODULE_EXT2
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -350,7 +350,7 @@ uint8_t sam_spi5status(FAR struct spi_dev_s *dev, uint32_t devid)
 int sam_spi0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAMD21_XPLAINED_OLED1MODULE_EXT1
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.
@@ -371,7 +371,7 @@ int sam_spi0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 int sam_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAMD21_XPLAINED_OLED1MODULE_EXT2
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.

configs/saml21-xplained/src/sam_spi.c

@@ -154,7 +154,7 @@ void sam_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAML21_XPLAINED_IOMODULE_EXT1
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -165,7 +165,7 @@ void sam_spi0select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAML21_XPLAINED_OLED1MODULE_EXT1
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -182,7 +182,7 @@ void sam_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAML21_XPLAINED_IOMODULE_EXT2
   /* Select/de-select the SD card */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -193,7 +193,7 @@ void sam_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
 #ifdef CONFIG_SAML21_XPLAINED_OLED1MODULE_EXT2
   /* Select/de-select the OLED */
 
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Active low */
 
@@ -254,7 +254,7 @@ uint8_t sam_spi0status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAML21_XPLAINED_IOMODULE_EXT1
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -277,7 +277,7 @@ uint8_t sam_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
 #ifdef CONFIG_SAML21_XPLAINED_IOMODULE_EXT2
   /* Check if an SD card is present in the microSD slot */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Active low */
 
@@ -350,7 +350,7 @@ uint8_t sam_spi5status(FAR struct spi_dev_s *dev, uint32_t devid)
 int sam_spi0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAML21_XPLAINED_OLED1MODULE_EXT1
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.
@@ -371,7 +371,7 @@ int sam_spi0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 int sam_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #ifdef CONFIG_SAML21_XPLAINED_OLED1MODULE_EXT2
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* This is the Data/Command control pad which determines whether the
        * data bits are data or a command.

configs/shenzhou/src/stm32_spi.c

@@ -123,13 +123,13 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
   /* SPI1 connects to the SD CARD and to the SPI FLASH */
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Set the GPIO low to select and high to de-select */
 
       stm32_gpiowrite(GPIO_SD_CS, !selected);
     }
-  else if (devid == SPIDEV_FLASH)
+  else if (devid == SPIDEV_FLASH(0))
     {
       /* Set the GPIO low to select and high to de-select */
 
@@ -161,25 +161,25 @@ void stm32_spi3select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
    * wireless module.
    */
 
-  if (devid == SPIDEV_TOUCHSCREEN)
+  if (devid == SPIDEV_TOUCHSCREEN(0))
     {
       /* Set the GPIO low to select and high to de-select */
 
       stm32_gpiowrite(GPIO_TP_CS, !selected);
     }
-  else if (devid == SPIDEV_MMCSD)
+  else if (devid == SPIDEV_MMCSD(0))
     {
       /* Set the GPIO low to select and high to de-select */
 
       stm32_gpiowrite(GPIO_LCDDF_CS, !selected);
     }
-  else if (devid == SPIDEV_FLASH)
+  else if (devid == SPIDEV_FLASH(0))
     {
       /* Set the GPIO low to select and high to de-select */
 
       stm32_gpiowrite(GPIO_LCDSD_CS, !selected);
     }
-  else if (devid == SPIDEV_WIRELESS)
+  else if (devid == SPIDEV_WIRELESS(0))
     {
       /* Set the GPIO low to select and high to de-select */
 

configs/spark/src/stm32_spi.c

@@ -134,7 +134,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 #if defined(CONFIG_MTD_SST25)
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       stm32_gpiowrite(GPIO_MEM_CS, !selected);
     }
@@ -144,7 +144,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 #endif
 
 #if defined(CONFIG_WL_CC3000)
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_WIFI_CS, !selected);
     }

configs/stm3210e-eval/src/stm32_spi.c

@@ -110,7 +110,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       /* Set the GPIO low to select and high to de-select */
 

configs/stm32_tiny/src/stm32_spi.c

@@ -125,7 +125,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   switch(devid)
   {
 #ifdef CONFIG_WL_NRF24L01
-    case SPIDEV_WIRELESS:
+    case SPIDEV_WIRELESS(0):
       spiinfo("nRF24L01 device %s\n", selected ? "asserted" : "de-asserted");
 
       /* Set the GPIO low to select and high to de-select */
@@ -144,7 +144,7 @@ uint8_t stm32_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
   switch(devid)
    {
 #ifdef CONFIG_WL_NRF24L01
-     case SPIDEV_WIRELESS:
+     case SPIDEV_WIRELESS(0):
        status |= SPI_STATUS_PRESENT;
        break;
 #endif

configs/stm32butterfly2/src/stm32_spi.c

@@ -78,7 +78,7 @@ void stm32_spi1select(struct spi_dev_s *dev, uint32_t devid,
 {
   spiinfo("INFO: Selecting spi dev: %d, state: %d\n", devid, select);
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32_gpiowrite(GPIO_SD_CS, !select);
     }
@@ -95,7 +95,7 @@ uint8_t stm32_spi1status(struct spi_dev_s *dev, uint32_t devid)
 {
   spiinfo("INFO: Requesting info from spi dev: %d\n", devid);
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       if (stm32_gpioread(GPIO_SD_CD) == 0)
         {

configs/stm32f103-minimum/src/stm32_spi.c

@@ -121,28 +121,28 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid,
                       bool selected)
 {
 #if defined(CONFIG_CL_MFRC522)
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_CS_MFRC522, !selected);
     }
 #endif
 
 #ifdef CONFIG_LCD_ST7567
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       stm32_gpiowrite(GPIO_CS_MFRC522, !selected);
     }
 #endif
 
 #ifdef CONFIG_WL_NRF24L01
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_NRF24L01_CS, !selected);
     }
 #endif
 
 #ifdef CONFIG_MMCSD_SPI
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32_gpiowrite(GPIO_SDCARD_CS, !selected);
     }
@@ -154,14 +154,14 @@ uint8_t stm32_spi1status(FAR struct spi_dev_s *dev, uint32_t devid)
   uint8_t status = 0;
 
 #ifdef CONFIG_WL_NRF24L01
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
        status |= SPI_STATUS_PRESENT;
     }
 #endif
 
 #ifdef CONFIG_MMCSD_SPI
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
        status |= SPI_STATUS_PRESENT;
     }
@@ -213,7 +213,7 @@ int stm32_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid,
                       bool cmd)
 {
 #ifdef CONFIG_LCD_ST7567
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /*  This is the Data/Command control pad which determines whether the
        *  data bits are data or a command.

configs/stm32f429i-disco/src/stm32_ili93414ws.c

@@ -855,7 +855,7 @@ static inline void stm32_ili93414ws_cmddata(
 {
   FAR struct ili93414ws_lcd_s *priv = (FAR struct ili93414ws_lcd_s *)lcd;
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, cmd);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), cmd);
 }
 #else
 static inline void stm32_ili93414ws_cmddata(
@@ -912,7 +912,7 @@ static void stm32_ili93414ws_select(FAR struct ili9341_lcd_s *lcd)
    */
 
   SPI_LOCK(priv->spi, true);
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Configure spi and disable */
 
@@ -971,7 +971,7 @@ static void stm32_ili93414ws_deselect(FAR struct ili9341_lcd_s *lcd)
 
   /* de-select ili9341 and relinquish the spi bus. */
 
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(priv->spi, false);
 }
 #else

configs/stm32f429i-disco/src/stm32_l3gd20.c

@@ -71,7 +71,7 @@ static struct l3gd20_config_s g_l3gd20_config =
 {
   .attach = l3gd20_attach,
   .irq = L3GD20_IRQ,
-  .spi_devid = SPIDEV_ACCELEROMETER
+  .spi_devid = SPIDEV_ACCELEROMETER(0)
 };
 
 /****************************************************************************

configs/stm32f429i-disco/src/stm32_spi.c

@@ -154,7 +154,7 @@ uint8_t stm32_spi3status(FAR struct spi_dev_s *dev, uint32_t devid)
 void stm32_spi4select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 {
 #if defined(CONFIG_MTD_SST25XX)
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       stm32_gpiowrite(GPIO_CS_SST25, !selected);
     }
@@ -173,7 +173,7 @@ void stm32_spi5select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #if defined(CONFIG_STM32F429I_DISCO_ILI9341)
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       stm32_gpiowrite(GPIO_CS_LCD, !selected);
     }
@@ -247,7 +247,7 @@ int stm32_spi4cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 int stm32_spi5cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #if defined(CONFIG_STM32F429I_DISCO_ILI9341)
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /*  This is the Data/Command control pad which determines whether the
        *  data bits are data or a command.

configs/stm32f4discovery/src/stm32_spi.c

@@ -122,7 +122,7 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 #if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01) || \
     defined(CONFIG_LCD_SSD1351)
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       stm32_gpiowrite(GPIO_OLED_CS, !selected);
     }
@@ -145,13 +145,13 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #if defined(CONFIG_MAX31855)
-  if (devid == SPIDEV_TEMPERATURE)
+  if (devid == SPIDEV_TEMPERATURE(0))
     {
       stm32_gpiowrite(GPIO_MAX31855_CS, !selected);
     }
 #endif
 #if defined(CONFIG_MAX6675)
-  if (devid == SPIDEV_TEMPERATURE)
+  if (devid == SPIDEV_TEMPERATURE(0))
     {
       stm32_gpiowrite(GPIO_MAX6675_CS, !selected);
     }
@@ -205,7 +205,7 @@ int stm32_spi1cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
 #if defined(CONFIG_LCD_UG2864AMBAG01) || defined(CONFIG_LCD_UG2864HSWEG01) || \
     defined(CONFIG_LCD_SSD1351)
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* "This is the Data/Command control pad which determines whether the
        *  data bits are data or a command.

configs/stm32l476vg-disco/src/stm32_spi.c

@@ -148,14 +148,14 @@ void stm32_spi1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_SPI_CS_WIFI, !selected);
     }
   else
 #endif
 #ifdef HAVE_MMCSD
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       stm32_gpiowrite(GPIO_SPI_CS_SD_CARD, !selected);
     }
@@ -174,7 +174,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
 
 #ifdef CONFIG_WL_CC3000
-  if (devid == SPIDEV_WIRELESS)
+  if (devid == SPIDEV_WIRELESS(0))
     {
       stm32_gpiowrite(GPIO_WIFI_CS, !selected);
     }

configs/sure-pic32mx/src/pic32mx_spi.c

@@ -181,14 +181,14 @@ void pic32mx_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected
   /* The SD card chip select is pulled high and active low */
 
 #ifdef PIC32_HAVE_SD
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       pic32mx_gpiowrite(GPIO_SD_CS, !selected);
     }
 #endif
 
 #ifdef PIC32_HAVE_SOIC
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       pic32mx_gpiowrite(GPIO_SOIC_CS, !selected);
     }
@@ -204,7 +204,7 @@ uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
    */
 
 #ifdef PIC32_HAVE_SD
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       if (!pic32mx_gpioread(GPIO_SD_CD))
         {
@@ -223,7 +223,7 @@ uint8_t pic32mx_spi2status(FAR struct spi_dev_s *dev, uint32_t devid)
 #endif
 
 #ifdef PIC32_HAVE_SOIC
-  if (devid == SPIDEV_FLASH)
+  if (devid == SPIDEV_FLASH(0))
     {
       ret = SPI_STATUS_PRESENT;
 

configs/u-blox-c027/src/lpc17_ssp.c

@@ -143,14 +143,14 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   ssp_dumpgpio("lpc17_ssp1select() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert/de-assert the CS pin to the card */
 
       (void)lpc17_gpiowrite(C027_SD_CS, !selected);
     }
 #ifdef CONFIG_NX_LCDDRIVER
-  else if (devid == SPIDEV_DISPLAY)
+  else if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the OLED display */
 
@@ -162,7 +162,7 @@ void  lpc17_ssp1select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 uint8_t lpc17_ssp1status(FAR struct spi_dev_s *dev, uint32_t devid)
 {
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Read the state of the card-detect bit */
 

configs/viewtool-stm32f107/src/stm32_spi.c

@@ -132,7 +132,7 @@ void stm32_spi2select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 #ifdef CONFIG_INPUT_ADS7843E
   /* Select/de-select the touchscreen */
 
-  if (devid == SPIDEV_TOUCHSCREEN)
+  if (devid == SPIDEV_TOUCHSCREEN(0))
     {
       stm32_gpiowrite(GPIO_LCDTP_CS, !selected);
     }

configs/zkit-arm-1769/src/lpc17_lcd.c

@@ -158,7 +158,7 @@ void board_lcd_uninitialize(void)
 
 int lpc17_ssp0cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 {
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Set GPIO to 1 for data, 0 for command */
 

configs/zkit-arm-1769/src/lpc17_spi.c

@@ -128,7 +128,7 @@ void  lpc17_spiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   spiinfo("devid: %d CS: %s\n", (int)devid, selected ? "assert" : "de-assert");
   spi_dumpgpio("lpc17_spiselect() Entry");
 
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Assert/de-assert the CS pin to the card */
 
@@ -140,7 +140,7 @@ void  lpc17_spiselect(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 uint8_t lpc17_spistatus(FAR struct spi_dev_s *dev, uint32_t devid)
 {
-  if (devid == SPIDEV_MMCSD)
+  if (devid == SPIDEV_MMCSD(0))
     {
       /* Read the state of the card-detect bit */
 

configs/zkit-arm-1769/src/lpc17_ssp.c

@@ -166,7 +166,7 @@ void  lpc17_ssp0select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
   ssp_dumpgpio("lpc17_ssp0select() Entry");
 
 #ifdef CONFIG_NX_LCDDRIVER
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       /* Assert the CS pin to the OLED display */
 
@@ -179,7 +179,7 @@ void  lpc17_ssp0select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 
 uint8_t lpc17_ssp0status(FAR struct spi_dev_s *dev, uint32_t devid)
 {
-  if (devid == SPIDEV_DISPLAY)
+  if (devid == SPIDEV_DISPLAY(0))
     {
       spiinfo("Returning SPI_STATUS_PRESENT\n");
       return SPI_STATUS_PRESENT;

configs/zp214xpa/src/lpc2148_spi1.c

@@ -220,7 +220,7 @@ static void spi_select(FAR struct spi_dev_s *dev, uint32_t devid, bool selected)
 #endif
   uint32_t bit = 1 << 20;
 
-  /* We do not bother to check if devid == SPIDEV_DISPLAY because that is the
+  /* We do not bother to check if devid == SPIDEV_DISPLAY(0) because that is the
    * only thing on the bus.
    */
 
@@ -353,7 +353,7 @@ static int spi_cmddata(FAR struct spi_dev_s *dev, uint32_t devid, bool cmd)
 #endif
   uint32_t bit = 1 << 23;
 
-  /* We do not bother to check if devid == SPIDEV_DISPLAY because that is the
+  /* We do not bother to check if devid == SPIDEV_DISPLAY(0) because that is the
    * only thing on the bus.
    */
 

drivers/analog/Kconfig

@@ -116,7 +116,7 @@ config PGA11X_MULTIPLE
 		Can be defined to support multiple PGA11X devices on board with separate
 		chip selects (not daisy chained).  Each device will require a customized
 		SPI interface to distinguish them when SPI_SELECT is called with
-		devid=SPIDEV_MUX.
+		devid=SPIDEV_MUX(n).
 
 endif # if ADC_PGA11X
 endif # ADC

drivers/analog/pga11x.c

@@ -278,9 +278,9 @@ static void pga11x_write(FAR struct spi_dev_s *spi, uint16_t cmd)
   /* Lock, select, send the 16-bit command, de-select, and un-lock. */
 
   pga11x_lock(spi);
-  SPI_SELECT(spi, SPIDEV_MUX, true);
+  SPI_SELECT(spi, SPIDEV_MUX(0), true);
   pga11x_send16(spi, cmd);
-  SPI_SELECT(spi, SPIDEV_MUX, false);
+  SPI_SELECT(spi, SPIDEV_MUX(0), false);
   pga11x_unlock(spi);
 }
 #else
@@ -293,10 +293,10 @@ static void pga11x_write(FAR struct spi_dev_s *spi, uint16_t u1cmd, uint16_t u2c
    */
 
   pga11x_lock(spi);
-  SPI_SELECT(spi, SPIDEV_MUX, true);
+  SPI_SELECT(spi, SPIDEV_MUX(0), true);
   pga11x_send16(spi, u2cmd);
   pga11x_send16(spi, u1cmd);
-  SPI_SELECT(spi, SPIDEV_MUX, false);
+  SPI_SELECT(spi, SPIDEV_MUX(0), false);
   pga11x_unlock(spi);
 }
 #endif
@@ -491,17 +491,17 @@ int pga11x_read(PGA11X_HANDLE handle, FAR struct pga11x_settings_s *settings)
    * for the part.
    */
 
-  SPI_SELECT(spi, SPIDEV_MUX, true);
+  SPI_SELECT(spi, SPIDEV_MUX(0), true);
   pga11x_send16(spi, PGA11X_CMD_READ);
   pga11x_send16(spi, PGA11X_DCCMD_READ);
-  SPI_SELECT(spi, SPIDEV_MUX, false);
+  SPI_SELECT(spi, SPIDEV_MUX(0), false);
 
   /* Re-select, get the returned values, de-select, and unlock */
 
-  SPI_SELECT(spi, SPIDEV_MUX, true);
+  SPI_SELECT(spi, SPIDEV_MUX(0), true);
   u2value = pga11x_recv16(spi);
   u1value = pga11x_recv16(spi);
-  SPI_SELECT(spi, SPIDEV_MUX, false);
+  SPI_SELECT(spi, SPIDEV_MUX(0), false);
   pga11x_unlock(spi);
 
   /* Decode the returned value */
@@ -528,15 +528,15 @@ int pga11x_read(PGA11X_HANDLE handle, FAR struct pga11x_settings_s *settings)
    * it is shown in the timing diagrams for the part.
    */
 
-  SPI_SELECT(spi, SPIDEV_MUX, true);
+  SPI_SELECT(spi, SPIDEV_MUX(0), true);
   pga11x_send16(spi, PGA11X_CMD_READ);
-  SPI_SELECT(spi, SPIDEV_MUX, false);
+  SPI_SELECT(spi, SPIDEV_MUX(0), false);
 
   /* Re-select, get the returned value, de-select, and unlock */
 
-  SPI_SELECT(spi, SPIDEV_MUX, true);
+  SPI_SELECT(spi, SPIDEV_MUX(0), true);
   value = pga11x_recv16(spi);
-  SPI_SELECT(spi, SPIDEV_MUX, false);
+  SPI_SELECT(spi, SPIDEV_MUX(0), false);
   pga11x_unlock(spi);
 
   /* Decode the returned value */

drivers/audio/vs1053.c

@@ -292,7 +292,7 @@ static uint16_t vs1053_readreg(FAR struct vs1053_struct_s *dev, uint8_t reg)
 
   /* Select the AUDIO_CTRL device on the SPI bus */
 
-  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL, true);
+  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL(0), true);
 
   /* Send the WRITE command followed by the address */
 
@@ -306,7 +306,7 @@ static uint16_t vs1053_readreg(FAR struct vs1053_struct_s *dev, uint8_t reg)
 
   /* Deselect the CODEC */
 
-  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL, false);
+  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL(0), false);
 
   return ret;
 }
@@ -324,7 +324,7 @@ static void vs1053_writereg(FAR struct vs1053_struct_s *dev, uint8_t reg, uint16
 
   audinfo("Write Reg %d = 0x%0X\n", reg, val);
 
-  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL, true);
+  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL(0), true);
 
   /* Send the WRITE command followed by the address */
 
@@ -338,7 +338,7 @@ static void vs1053_writereg(FAR struct vs1053_struct_s *dev, uint8_t reg, uint16
 
   /* Deselect the CODEC */
 
-  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL, false);
+  SPI_SELECT(spi, SPIDEV_AUDIO_CTRL(0), false);
 
   /* Short delay after a write for VS1053 processing time */
 
@@ -955,7 +955,7 @@ static void vs1053_feeddata(FAR struct vs1053_struct_s *dev)
    */
 
   vs1053_spi_lock(spi, VS1053_DATA_FREQ);   /* Lock the SPI bus */
-  SPI_SELECT(spi, SPIDEV_AUDIO_DATA, true); /* Select the VS1053 data bus */
+  SPI_SELECT(spi, SPIDEV_AUDIO_DATA(0), true); /* Select the VS1053 data bus */
 
   /* Local stack copy of our active buffer */
 
@@ -970,7 +970,7 @@ static void vs1053_feeddata(FAR struct vs1053_struct_s *dev)
     }
   else if (!dev->endmode)
     {
-      SPI_SELECT(spi, SPIDEV_AUDIO_DATA, false);
+      SPI_SELECT(spi, SPIDEV_AUDIO_DATA(0), false);
       vs1053_spi_unlock(spi);
       return;
     }
@@ -1194,7 +1194,7 @@ static void vs1053_feeddata(FAR struct vs1053_struct_s *dev)
 
   /* Deselect the SPI bus and unlock it */
 err_out:
-  SPI_SELECT(spi, SPIDEV_AUDIO_DATA, false);
+  SPI_SELECT(spi, SPIDEV_AUDIO_DATA(0), false);
   vs1053_spi_unlock(spi);
 }
 

drivers/contactless/mfrc522.c

@@ -173,12 +173,12 @@ static inline void mfrc522_configspi(FAR struct spi_dev_s *spi)
 
 static inline void mfrc522_select(struct mfrc522_dev_s *dev)
 {
-  SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS, true);
+  SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), true);
 }
 
 static inline void mfrc522_deselect(struct mfrc522_dev_s *dev)
 {
-  SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS, false);
+  SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), false);
 }
 
 /****************************************************************************

drivers/contactless/pn532.c

@@ -201,7 +201,7 @@ static inline void pn532_select(struct pn532_dev_s *dev)
     }
   else
     {
-      SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS, true);
+      SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), true);
     }
 }
 
@@ -213,7 +213,7 @@ static inline void pn532_deselect(struct pn532_dev_s *dev)
     }
   else
     {
-      SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS, false);
+      SPI_SELECT(dev->spi, SPIDEV_CONTACTLESS(0), false);
     }
 }
 

drivers/eeprom/spi_xx25xx.c

@@ -358,7 +358,7 @@ static void ee25xx_waitwritecomplete(struct ee25xx_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->spi, SPIDEV_EEPROM, true);
+      SPI_SELECT(priv->spi, SPIDEV_EEPROM(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -372,7 +372,7 @@ static void ee25xx_waitwritecomplete(struct ee25xx_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->spi, SPIDEV_EEPROM, false);
+      SPI_SELECT(priv->spi, SPIDEV_EEPROM(0), false);
 
       /* Given that writing could take up to a few milliseconds,
        * the following short delay in the "busy" case will allow
@@ -401,11 +401,11 @@ static void ee25xx_waitwritecomplete(struct ee25xx_dev_s *priv)
 static void ee25xx_writeenable(FAR struct spi_dev_s *spi, int enable)
 {
   ee25xx_lock(spi);
-  SPI_SELECT(spi, SPIDEV_EEPROM, true);
+  SPI_SELECT(spi, SPIDEV_EEPROM(0), true);
 
   SPI_SEND(spi, enable ? EE25XX_CMD_WREN : EE25XX_CMD_WRDIS);
 
-  SPI_SELECT(spi, SPIDEV_EEPROM, false);
+  SPI_SELECT(spi, SPIDEV_EEPROM(0), false);
   ee25xx_unlock(spi);
 }
 
@@ -420,12 +420,12 @@ static void ee25xx_writepage(FAR struct ee25xx_dev_s *eedev, uint32_t devaddr,
                              FAR const char *data, size_t len)
 {
   ee25xx_lock(eedev->spi);
-  SPI_SELECT(eedev->spi, SPIDEV_EEPROM, true);
+  SPI_SELECT(eedev->spi, SPIDEV_EEPROM(0), true);
 
   ee25xx_sendcmd(eedev->spi, EE25XX_CMD_WRITE, eedev->addrlen, devaddr);
   SPI_SNDBLOCK(eedev->spi, data, len);
 
-  SPI_SELECT(eedev->spi, SPIDEV_EEPROM, false);
+  SPI_SELECT(eedev->spi, SPIDEV_EEPROM(0), false);
   ee25xx_unlock(eedev->spi);
 }
 
@@ -625,7 +625,7 @@ static ssize_t ee25xx_read(FAR struct file *filep, FAR char *buffer,
     }
 
   ee25xx_lock(eedev->spi);
-  SPI_SELECT(eedev->spi, SPIDEV_EEPROM, true);
+  SPI_SELECT(eedev->spi, SPIDEV_EEPROM(0), true);
 
   /* STM32F4Disco: There is a 25 us delay here */
 
@@ -637,7 +637,7 @@ static ssize_t ee25xx_read(FAR struct file *filep, FAR char *buffer,
 
   /* STM32F4Disco: There is a 20 us delay here */
 
-  SPI_SELECT(eedev->spi, SPIDEV_EEPROM, false);
+  SPI_SELECT(eedev->spi, SPIDEV_EEPROM(0), false);
   ee25xx_unlock(eedev->spi);
 
   /* Update the file position */

drivers/input/ads7843e.c

@@ -189,12 +189,12 @@ static void ads7843e_lock(FAR struct spi_dev_s *spi)
    * unlocked)
    */
 
-  SPI_SELECT(spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(spi, SPIDEV_TOUCHSCREEN(0), true);
   SPI_SETMODE(spi, CONFIG_ADS7843E_SPIMODE);
   SPI_SETBITS(spi, 8);
   (void)SPI_HWFEATURES(spi, 0);
   (void)SPI_SETFREQUENCY(spi, CONFIG_ADS7843E_FREQUENCY);
-  SPI_SELECT(spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(spi, SPIDEV_TOUCHSCREEN(0), false);
 }
 
 /****************************************************************************
@@ -263,7 +263,7 @@ static uint16_t ads7843e_sendcmd(FAR struct ads7843e_dev_s *priv, uint8_t cmd)
 
   /* Select the ADS7843E */
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
 
   /* Send the command */
 
@@ -276,7 +276,7 @@ static uint16_t ads7843e_sendcmd(FAR struct ads7843e_dev_s *priv, uint8_t cmd)
   /* Read the 12-bit data (LS 4 bits will be padded with zero) */
 
   SPI_RECVBLOCK(priv->spi, buffer, 2);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
   result = ((uint16_t)buffer[0] << 8) | (uint16_t)buffer[1];
   result = result >> 4;

drivers/input/max11802.c

@@ -231,7 +231,7 @@ static uint16_t max11802_sendcmd(FAR struct max11802_dev_s *priv,
 
   /* Select the MAX11802 */
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
 
   /* Send the command */
 
@@ -240,7 +240,7 @@ static uint16_t max11802_sendcmd(FAR struct max11802_dev_s *priv,
   /* Read the data */
 
   SPI_RECVBLOCK(priv->spi, buffer, 2);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
   result = ((uint16_t)buffer[0] << 8) | (uint16_t)buffer[1];
   *tags = result & 0xF;
@@ -1225,32 +1225,32 @@ int max11802_register(FAR struct spi_dev_s *spi,
 
   /* Configure MAX11802 registers */
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
   (void)SPI_SEND(priv->spi, MAX11802_CMD_MODE_WR);
   (void)SPI_SEND(priv->spi, MAX11802_MODE);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
   (void)SPI_SEND(priv->spi, MAX11802_CMD_AVG_WR);
   (void)SPI_SEND(priv->spi, MAX11802_AVG);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
   (void)SPI_SEND(priv->spi, MAX11802_CMD_TIMING_WR);
   (void)SPI_SEND(priv->spi, MAX11802_TIMING);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
   (void)SPI_SEND(priv->spi, MAX11802_CMD_DELAY_WR);
   (void)SPI_SEND(priv->spi, MAX11802_DELAY);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
   /* Test that the device access was successful. */
 
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, true);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), true);
   (void)SPI_SEND(priv->spi, MAX11802_CMD_MODE_RD);
   ret = SPI_SEND(priv->spi, 0);
-  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN, false);
+  SPI_SELECT(priv->spi, SPIDEV_TOUCHSCREEN(0), false);
 
   /* Unlock the bus */
 

drivers/lcd/memlcd.c

@@ -285,7 +285,7 @@ static void memlcd_select(FAR struct spi_dev_s *spi)
    */
 
   SPI_LOCK(spi, true);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Now make sure that the SPI bus is configured for the memlcd (it
    * might have gotten configured for a different device while unlocked)
@@ -327,7 +327,7 @@ static void memlcd_deselect(FAR struct spi_dev_s *spi)
 {
   /* De-select memlcd and relinquish the spi bus. */
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(spi, false);
 }
 

drivers/lcd/nokia6100.c

@@ -661,7 +661,7 @@ static void nokia_select(FAR struct spi_dev_s *spi)
   lcdinfo("SELECTED\n");
 
   SPI_LOCK(spi, true);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Now make sure that the SPI bus is configured for the Nokia 6100 (it
    * might have gotten configured for a different device while unlocked)
@@ -695,7 +695,7 @@ static void nokia_deselect(FAR struct spi_dev_s *spi)
 
   lcdinfo("DE-SELECTED\n");
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(spi, false);
 }
 

drivers/lcd/p14201.c

@@ -449,7 +449,7 @@ static void rit_select(FAR struct spi_dev_s *spi)
    */
 
   SPI_LOCK(spi, true);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Now make sure that the SPI bus is configured for the P14201 (it
    * might have gotten configured for a different device while unlocked)
@@ -483,7 +483,7 @@ static void rit_deselect(FAR struct spi_dev_s *spi)
 {
   /* De-select P14201 chip and relinquish the SPI bus. */
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(spi, false);
 }
 
@@ -518,7 +518,7 @@ static void rit_sndbytes(FAR struct rit_dev_s *priv, FAR const uint8_t *buffer,
 
   /* Clear/set the D/Cn bit to enable command or data mode */
 
-  (void)SPI_CMDDATA(spi, SPIDEV_DISPLAY, cmd);
+  (void)SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), cmd);
 
   /* Loop until the entire command/data block is transferred */
 

drivers/lcd/ssd1306_spi.c

@@ -130,7 +130,7 @@ void ssd1306_select(FAR struct ssd1306_dev_s *priv, bool cs)
 
   /* Select/deselect SPI device */
 
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, cs);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), cs);
 
   /* If we are deselecting the device */
 
@@ -154,6 +154,6 @@ void ssd1306_cmddata(FAR struct ssd1306_dev_s *priv, bool cmd)
 {
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, cmd);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), cmd);
 }
 #endif /* CONFIG_LCD_SSD1306 && CONFIG_LCD_SSD1306_SPI */

drivers/lcd/ssd1351.c

@@ -502,7 +502,7 @@ static void ssd1351_select(FAR struct ssd1351_dev_s *priv)
   ginfo("SELECTED\n");
 
   SPI_LOCK(spi, true);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Now make sure that the SPI bus is configured for this device (it might
    * have gotten configured for a different device while unlocked)
@@ -532,7 +532,7 @@ static void ssd1351_deselect(FAR struct ssd1351_dev_s *priv)
 
   ginfo("DE-SELECTED\n");
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(spi, false);
 }
 #endif
@@ -648,7 +648,7 @@ static void ssd1351_write(FAR struct ssd1351_dev_s *priv, uint8_t cmd,
 
   /* Select command transfer */
 
-  (void)SPI_CMDDATA(spi, SPIDEV_DISPLAY, true);
+  (void)SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), true);
 
   /* Send the command */
 
@@ -660,7 +660,7 @@ static void ssd1351_write(FAR struct ssd1351_dev_s *priv, uint8_t cmd,
     {
       /* Yes, select data transfer */
 
-      (void)SPI_CMDDATA(spi, SPIDEV_DISPLAY, false);
+      (void)SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), false);
 
       /* Transfer all of the data */
 

drivers/lcd/st7567.c

@@ -365,7 +365,7 @@ static void st7567_select(FAR struct spi_dev_s *spi)
    */
 
   SPI_LOCK(spi, true);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Now make sure that the SPI bus is configured for the ST7567 (it
    * might have gotten configured for a different device while unlocked)
@@ -399,7 +399,7 @@ static void st7567_deselect(FAR struct spi_dev_s *spi)
 {
   /* De-select ST7567 chip and relinquish the SPI bus. */
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(spi, false);
 }
 
@@ -530,7 +530,7 @@ static int st7567_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buff
 
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the starting position for the run */
 
@@ -540,7 +540,7 @@ static int st7567_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buff
 
   /* Select data transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), false);
 
   /* Then transfer all of the data */
 
@@ -812,7 +812,7 @@ static int st7567_setcontrast(struct lcd_dev_s *dev, unsigned int contrast)
 
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the contrast */
 
@@ -854,7 +854,7 @@ static inline void up_clear(FAR struct st7567_dev_s  *priv)
     {
       /* Select command transfer */
 
-      SPI_CMDDATA(spi, SPIDEV_DISPLAY, true);
+      SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), true);
 
       /* Set the starting position for the run */
 
@@ -864,7 +864,7 @@ static inline void up_clear(FAR struct st7567_dev_s  *priv)
 
       /* Select data transfer */
 
-      SPI_CMDDATA(spi, SPIDEV_DISPLAY, false);
+      SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), false);
 
        /* Then transfer all 96 columns of data */
 
@@ -924,7 +924,7 @@ FAR struct lcd_dev_s *st7567_initialize(FAR struct spi_dev_s *spi, unsigned int
 
   /* Select command transfer */
 
-  SPI_CMDDATA(spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the starting position for the run */
 

drivers/lcd/ug-2864ambag01.c

@@ -622,11 +622,11 @@ static int ug2864ambag01_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_
   /* Lock and select device */
 
   ug2864ambag01_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the starting position for the run */
   /* Set the column address to the XOFFSET value */
@@ -640,7 +640,7 @@ static int ug2864ambag01_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_
 
   /* Select data transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), false);
 
   /* Then transfer all of the data */
 
@@ -648,7 +648,7 @@ static int ug2864ambag01_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_
 
   /* De-select and unlock the device */
 
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), false);
   ug2864ambag01_unlock(priv->spi);
   return OK;
 }
@@ -892,7 +892,7 @@ static int ug2864ambag01_setpower(struct lcd_dev_s *dev, int power)
   /* Lock and select device */
 
   ug2864ambag01_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), true);
 
   if (power <= 0)
     {
@@ -911,7 +911,7 @@ static int ug2864ambag01_setpower(struct lcd_dev_s *dev, int power)
 
   /* De-select and unlock the device */
 
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), false);
   ug2864ambag01_unlock(priv->spi);
   return OK;
 }
@@ -971,11 +971,11 @@ static int ug2864ambag01_setcontrast(struct lcd_dev_s *dev, unsigned int contras
   /* Lock and select device */
 
   ug2864ambag01_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the contrast */
 
@@ -985,7 +985,7 @@ static int ug2864ambag01_setcontrast(struct lcd_dev_s *dev, unsigned int contras
 
   /* De-select and unlock the device */
 
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), false);
   ug2864ambag01_unlock(priv->spi);
   return OK;
 }
@@ -1029,11 +1029,11 @@ FAR struct lcd_dev_s *ug2864ambag01_initialize(FAR struct spi_dev_s *spi, unsign
   /* Lock and select device */
 
   ug2864ambag01_lock(priv->spi);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Select command transfer */
 
-  SPI_CMDDATA(spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), true);
 
   /* Configure the device */
 
@@ -1064,7 +1064,7 @@ FAR struct lcd_dev_s *ug2864ambag01_initialize(FAR struct spi_dev_s *spi, unsign
 
   /* De-select and unlock the device */
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   ug2864ambag01_unlock(priv->spi);
 
   /* Clear the display */
@@ -1112,7 +1112,7 @@ void ug2864ambag01_fill(FAR struct lcd_dev_s *dev, uint8_t color)
   /* Lock and select device */
 
   ug2864ambag01_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Visit each page */
 
@@ -1120,7 +1120,7 @@ void ug2864ambag01_fill(FAR struct lcd_dev_s *dev, uint8_t color)
     {
       /* Select command transfer */
 
-      SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+      SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
       /* Set the column address to the XOFFSET value */
 
@@ -1133,7 +1133,7 @@ void ug2864ambag01_fill(FAR struct lcd_dev_s *dev, uint8_t color)
 
       /* Select data transfer */
 
-      SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, false);
+      SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), false);
 
       /* Transfer one page of the selected color */
 
@@ -1143,7 +1143,7 @@ void ug2864ambag01_fill(FAR struct lcd_dev_s *dev, uint8_t color)
 
   /* De-select and unlock the device */
 
-  SPI_SELECT(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(priv->spi, SPIDEV_DISPLAY(0), false);
   ug2864ambag01_unlock(priv->spi);
 }
 

drivers/lcd/ug-9664hswag01.c

@@ -399,7 +399,7 @@ static void ug_select(FAR struct spi_dev_s *spi)
    */
 
   SPI_LOCK(spi, true);
-  SPI_SELECT(spi, SPIDEV_DISPLAY, true);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), true);
 
   /* Now make sure that the SPI bus is configured for the UG-9664HSWAG01 (it
    * might have gotten configured for a different device while unlocked)
@@ -433,7 +433,7 @@ static void ug_deselect(FAR struct spi_dev_s *spi)
 {
   /* De-select UG-9664HSWAG01 chip and relinquish the SPI bus. */
 
-  SPI_SELECT(spi, SPIDEV_DISPLAY, false);
+  SPI_SELECT(spi, SPIDEV_DISPLAY(0), false);
   SPI_LOCK(spi, false);
 }
 
@@ -614,7 +614,7 @@ static int ug_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
 
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the starting position for the run */
 
@@ -624,7 +624,7 @@ static int ug_putrun(fb_coord_t row, fb_coord_t col, FAR const uint8_t *buffer,
 
   /* Select data transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, false);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), false);
 
   /* Then transfer all of the data */
 
@@ -943,7 +943,7 @@ static int ug_setcontrast(struct lcd_dev_s *dev, unsigned int contrast)
 
   /* Select command transfer */
 
-  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(priv->spi, SPIDEV_DISPLAY(0), true);
 
   /* Set the contrast */
 
@@ -985,7 +985,7 @@ static inline void up_clear(FAR struct ug_dev_s  *priv)
     {
       /* Select command transfer */
 
-      SPI_CMDDATA(spi, SPIDEV_DISPLAY, true);
+      SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), true);
 
       /* Set the starting position for the run */
 
@@ -995,7 +995,7 @@ static inline void up_clear(FAR struct ug_dev_s  *priv)
 
       /* Select data transfer */
 
-      SPI_CMDDATA(spi, SPIDEV_DISPLAY, false);
+      SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), false);
 
        /* Then transfer all 96 columns of data */
 
@@ -1055,7 +1055,7 @@ FAR struct lcd_dev_s *ug_initialize(FAR struct spi_dev_s *spi, unsigned int devn
 
   /* Select command transfer */
 
-  SPI_CMDDATA(spi, SPIDEV_DISPLAY, true);
+  SPI_CMDDATA(spi, SPIDEV_DISPLAY(0), true);
 
   /* Configure the device */
 

drivers/mmcsd/mmcsd_spi.c

@@ -842,7 +842,7 @@ static void mmcsd_checkwrprotect(FAR struct mmcsd_slot_s *slot, uint8_t *csd)
    * reports temporary write protect.
    */
 
-  if ((SPI_STATUS(spi, SPIDEV_MMCSD) & SPI_STATUS_WRPROTECTED) != 0 ||
+  if ((SPI_STATUS(spi, SPIDEV_MMCSD(0)) & SPI_STATUS_WRPROTECTED) != 0 ||
       MMCSD_CSD_PERMWRITEPROTECT(csd) ||
       MMCSD_CSD_TMPWRITEPROTECT(csd))
     {
@@ -1056,7 +1056,7 @@ static int mmcsd_open(FAR struct inode *inode)
 
   ret = -ENODEV;
   mmcsd_semtake(slot);
-  if ((SPI_STATUS(spi, SPIDEV_MMCSD) & SPI_STATUS_PRESENT) != 0)
+  if ((SPI_STATUS(spi, SPIDEV_MMCSD(0)) & SPI_STATUS_PRESENT) != 0)
     {
       /* Yes.. a card is present.  Has it been initialized? */
 
@@ -1074,9 +1074,9 @@ static int mmcsd_open(FAR struct inode *inode)
 
       /* Make sure that the card is ready */
 
-      SPI_SELECT(spi, SPIDEV_MMCSD, true);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), true);
       ret = mmcsd_waitready(slot);
-      SPI_SELECT(spi, SPIDEV_MMCSD, false);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
     }
 
 errout_with_sem:
@@ -1177,7 +1177,7 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer,
   /* Select the slave */
 
   mmcsd_semtake(slot);
-  SPI_SELECT(spi, SPIDEV_MMCSD, true);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), true);
 
   /* Single or multiple block read? */
 
@@ -1235,7 +1235,7 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer,
 
   /* On success, return the number of sectors transfer */
 
-  SPI_SELECT(spi, SPIDEV_MMCSD, false);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
   SPI_SEND(spi, 0xff);
   mmcsd_semgive(slot);
 
@@ -1244,7 +1244,7 @@ static ssize_t mmcsd_read(FAR struct inode *inode, unsigned char *buffer,
   return nsectors;
 
 errout_with_eio:
-  SPI_SELECT(spi, SPIDEV_MMCSD, false);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
   mmcsd_semgive(slot);
   return -EIO;
 }
@@ -1341,7 +1341,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer,
   /* Select the slave */
 
   mmcsd_semtake(slot);
-  SPI_SELECT(spi, SPIDEV_MMCSD, true);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), true);
 
   /* Single or multiple block transfer? */
 
@@ -1422,7 +1422,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer,
   /* Wait until the card is no longer busy */
 
   (void)mmcsd_waitready(slot);
-  SPI_SELECT(spi, SPIDEV_MMCSD, false);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
   SPI_SEND(spi, 0xff);
   mmcsd_semgive(slot);
 
@@ -1431,7 +1431,7 @@ static ssize_t mmcsd_write(FAR struct inode *inode, const unsigned char *buffer,
   return nsectors;
 
 errout_with_sem:
-  SPI_SELECT(spi, SPIDEV_MMCSD, false);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
   mmcsd_semgive(slot);
   return -EIO;
 }
@@ -1482,9 +1482,9 @@ static int mmcsd_geometry(FAR struct inode *inode, struct geometry *geometry)
   /* Re-sample the CSD */
 
   mmcsd_semtake(slot);
-  SPI_SELECT(spi, SPIDEV_MMCSD, true);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), true);
   ret = mmcsd_getcsd(slot, csd);
-  SPI_SELECT(spi, SPIDEV_MMCSD, false);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
 
   if (ret < 0)
     {
@@ -1564,7 +1564,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
    * interface
    */
 
-  if ((SPI_STATUS(spi, SPIDEV_MMCSD) & SPI_STATUS_PRESENT) == 0)
+  if ((SPI_STATUS(spi, SPIDEV_MMCSD(0)) & SPI_STATUS_PRESENT) == 0)
     {
       fwarn("WARNING: No card present\n");
       slot->state |= MMCSD_SLOTSTATUS_NODISK;
@@ -1602,7 +1602,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
        */
 
       finfo("Send CMD0\n");
-      SPI_SELECT(spi, SPIDEV_MMCSD, true);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), true);
       result = mmcsd_sendcmd(slot, &g_cmd0, 0);
       if (result == MMCSD_SPIR1_IDLESTATE)
         {
@@ -1614,7 +1614,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
 
       /* De-select card and try again */
 
-      SPI_SELECT(spi, SPIDEV_MMCSD, false);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
     }
 
   /* Verify that we exit the above loop with the card reporting IDLE state */
@@ -1622,7 +1622,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
   if (result != MMCSD_SPIR1_IDLESTATE)
     {
       ferr("ERROR: Send CMD0 failed: R1=%02x\n", result);
-      SPI_SELECT(spi, SPIDEV_MMCSD, false);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
       mmcsd_semgive(slot);
       return -EIO;
     }
@@ -1749,7 +1749,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
       if (elapsed >= MMCSD_DELAY_1SEC)
         {
           ferr("ERROR: Failed to exit IDLE state\n");
-          SPI_SELECT(spi, SPIDEV_MMCSD, false);
+          SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
           mmcsd_semgive(slot);
           return -EIO;
         }
@@ -1758,7 +1758,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
   if (slot->type == MMCSD_CARDTYPE_UNKNOWN)
     {
       ferr("ERROR: Failed to identify card\n");
-      SPI_SELECT(spi, SPIDEV_MMCSD, false);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
       mmcsd_semgive(slot);
       return -EIO;
     }
@@ -1770,7 +1770,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
   if (result != OK)
     {
       ferr("ERROR: mmcsd_getcsd(CMD9) failed: %d\n", result);
-      SPI_SELECT(spi, SPIDEV_MMCSD, false);
+      SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
       mmcsd_semgive(slot);
       return -EIO;
     }
@@ -1814,7 +1814,7 @@ static int mmcsd_mediainitialize(FAR struct mmcsd_slot_s *slot)
 #endif
 
   slot->state &= ~MMCSD_SLOTSTATUS_NOTREADY;
-  SPI_SELECT(spi, SPIDEV_MMCSD, false);
+  SPI_SELECT(spi, SPIDEV_MMCSD(0), false);
   return OK;
 }
 
@@ -1853,7 +1853,7 @@ static void mmcsd_mediachanged(void *arg)
   slot->state &= ~(MMCSD_SLOTSTATUS_NODISK | MMCSD_SLOTSTATUS_NOTREADY |
                    MMCSD_SLOTSTATUS_MEDIACHGD);
 
-  if ((SPI_STATUS(spi, SPIDEV_MMCSD) & SPI_STATUS_PRESENT) == 0)
+  if ((SPI_STATUS(spi, SPIDEV_MMCSD(0)) & SPI_STATUS_PRESENT) == 0)
     {
       /* Media is not present */
 

drivers/mtd/at24xx.c

@@ -641,7 +641,7 @@ FAR struct mtd_dev_s *at24c_initialize(FAR struct i2c_master_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per I2C
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same I2C bus.
    */
 

drivers/mtd/at25.c

@@ -218,7 +218,7 @@ static inline int at25_readid(struct at25_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   at25_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -228,7 +228,7 @@ static inline int at25_readid(struct at25_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   at25_unlock(priv->dev);
 
   finfo("manufacturer: %02x memory: %02x\n",
@@ -262,7 +262,7 @@ static void at25_waitwritecomplete(struct at25_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -274,7 +274,7 @@ static void at25_waitwritecomplete(struct at25_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -304,9 +304,9 @@ static void at25_waitwritecomplete(struct at25_dev_s *priv)
 
 static void at25_writeenable(struct at25_dev_s *priv)
 {
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
   (void)SPI_SEND(priv->dev, AT25_WREN);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Enabled\n");
 }
 
@@ -334,7 +334,7 @@ static inline void at25_sectorerase(struct at25_dev_s *priv, off_t sector)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" instruction */
 
@@ -351,7 +351,7 @@ static inline void at25_sectorerase(struct at25_dev_s *priv, off_t sector)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Erased\n");
 }
 
@@ -377,7 +377,7 @@ static inline int at25_bulkerase(struct at25_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Bulk Erase (BE)" instruction */
 
@@ -385,7 +385,7 @@ static inline int at25_bulkerase(struct at25_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Return: OK\n");
   return OK;
 }
@@ -415,7 +415,7 @@ static inline void at25_pagewrite(struct at25_dev_s *priv, FAR const uint8_t *bu
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -433,7 +433,7 @@ static inline void at25_pagewrite(struct at25_dev_s *priv, FAR const uint8_t *bu
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 
@@ -535,7 +535,7 @@ static ssize_t at25_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
   /* Lock the SPI bus and select this FLASH part */
 
   at25_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -553,7 +553,7 @@ static ssize_t at25_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
 
   /* Deselect the FLASH and unlock the SPI bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   at25_unlock(priv->dev);
 
   finfo("return nbytes: %d\n", (int)nbytes);
@@ -642,7 +642,7 @@ FAR struct mtd_dev_s *at25_initialize(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -662,7 +662,7 @@ FAR struct mtd_dev_s *at25_initialize(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 
@@ -680,10 +680,10 @@ FAR struct mtd_dev_s *at25_initialize(FAR struct spi_dev_s *dev)
           /* Unprotect all sectors */
 
           at25_writeenable(priv);
-          SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+          SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
           (void)SPI_SEND(priv->dev, AT25_WRSR);
           (void)SPI_SEND(priv->dev, AT25_SR_UNPROT);
-          SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+          SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
         }
     }
 

drivers/mtd/at45db.c

@@ -312,9 +312,9 @@ static inline void at45db_unlock(FAR struct at45db_dev_s *priv)
 #ifdef CONFIG_AT45DB_PWRSAVE
 static void at45db_pwrdown(FAR struct at45db_dev_s *priv)
 {
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SEND(priv->spi, AT45DB_PWRDOWN);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 }
 #endif
 
@@ -325,9 +325,9 @@ static void at45db_pwrdown(FAR struct at45db_dev_s *priv)
 #ifdef CONFIG_AT45DB_PWRSAVE
 static void at45db_resume(FAR struct at45db_dev_s *priv)
 {
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SEND(priv->spi, AT45DB_RESUME);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
   up_udelay(50);
 }
 #endif
@@ -347,7 +347,7 @@ static inline int at45db_rdid(FAR struct at45db_dev_s *priv)
    * locked the bus for exclusive access)
    */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send the " Manufacturer and Device ID Read" command and read the next three
    * ID bytes from the FLASH.
@@ -358,7 +358,7 @@ static inline int at45db_rdid(FAR struct at45db_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
   finfo("manufacturer: %02x devid1: %02x devid2: %02x\n",
         devid[0], devid[1], devid[2]);
@@ -438,10 +438,10 @@ static inline uint8_t at45db_rdsr(FAR struct at45db_dev_s *priv)
 {
   uint8_t retval;
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SEND(priv->spi, AT45DB_RDSR);
   retval = SPI_SEND(priv->spi, 0xff);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
   return retval;
 }
 
@@ -503,9 +503,9 @@ static inline void at45db_pgerase(FAR struct at45db_dev_s *priv, off_t sector)
 
   /* Erase the page */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SNDBLOCK(priv->spi, erasecmd, 4);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
   /* Wait for any erase to complete if we are not trying to improve write
    * performance. (see comments above).
@@ -545,9 +545,9 @@ static inline int at32db_chiperase(FAR struct at45db_dev_s *priv)
    * down...
    */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SNDBLOCK(priv->spi, g_chiperase, CHIP_ERASE_SIZE);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
   /* Wait for any erase to complete if we are not trying to improve write
    * performance. (see comments above).
@@ -589,10 +589,10 @@ static inline void at45db_pgwrite(FAR struct at45db_dev_s *priv,
   at45db_waitbusy(priv);
 #endif
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SNDBLOCK(priv->spi, wrcmd, 4);
   SPI_SNDBLOCK(priv->spi, buffer, 1 << priv->pageshift);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
   /* Wait for any erase to complete if we are not trying to improve write
    * performance. (see comments above).
@@ -733,10 +733,10 @@ static ssize_t at45db_read(FAR struct mtd_dev_s *mtd, off_t offset, size_t nbyte
 
   /* Perform the read */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
   SPI_SNDBLOCK(priv->spi, rdcmd, 5);
   SPI_RECVBLOCK(priv->spi, buffer, nbytes);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
   at45db_pwrdown(priv);
   at45db_unlock(priv);
@@ -835,7 +835,7 @@ FAR struct mtd_dev_s *at45db_initialize(FAR struct spi_dev_s *spi)
   /* Allocate a state structure (we allocate the structure instead of using a fixed,
    * static allocation so that we can handle multiple FLASH devices.  The current
    * implementation would handle only one FLASH part per SPI device (only because
-   * of the SPIDEV_FLASH definition) and so would have to be extended to handle
+   * of the SPIDEV_FLASH(0) definition) and so would have to be extended to handle
    * multiple FLASH parts on the same SPI bus.
    */
 
@@ -855,7 +855,7 @@ FAR struct mtd_dev_s *at45db_initialize(FAR struct spi_dev_s *spi)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(spi, SPIDEV_FLASH, false);
+      SPI_SELECT(spi, SPIDEV_FLASH(0), false);
 
       /* Lock and configure the SPI bus. */
 
@@ -889,9 +889,9 @@ FAR struct mtd_dev_s *at45db_initialize(FAR struct spi_dev_s *spi)
 
           fwarn("WARNING: Reprogramming page size\n");
 
-          SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+          SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
           SPI_SNDBLOCK(priv->spi, g_binpgsize, BINPGSIZE_SIZE);
-          SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+          SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
           goto errout;
         }
 

drivers/mtd/is25xp.c

@@ -253,7 +253,7 @@ static inline int is25xp_readid(struct is25xp_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   is25xp_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -264,7 +264,7 @@ static inline int is25xp_readid(struct is25xp_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   is25xp_unlock(priv->dev);
 
   finfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -324,7 +324,7 @@ static void is25xp_waitwritecomplete(struct is25xp_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read Status Register (RDSR)" command */
 
@@ -342,7 +342,7 @@ static void is25xp_waitwritecomplete(struct is25xp_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
 #else
 
@@ -352,7 +352,7 @@ static void is25xp_waitwritecomplete(struct is25xp_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -364,7 +364,7 @@ static void is25xp_waitwritecomplete(struct is25xp_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -394,7 +394,7 @@ static void is25xp_writeenable(struct is25xp_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -402,7 +402,7 @@ static void is25xp_writeenable(struct is25xp_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Enabled\n");
 }
 
@@ -418,14 +418,14 @@ static void is25xp_unprotect(struct is25xp_dev_s *priv)
 
   /* Send "Write status (WRSR)" */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
   SPI_SEND(priv->dev, IS25_WRSR);
 
   /* Followed by the new status value */
 
   SPI_SEND(priv->dev, 0);
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -454,7 +454,7 @@ static void is25xp_sectorerase(struct is25xp_dev_s *priv, off_t sector, uint8_t
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" or Sub-Sector Erase (SSE) instruction
    * that was passed in as the erase type.
@@ -474,7 +474,7 @@ static void is25xp_sectorerase(struct is25xp_dev_s *priv, off_t sector, uint8_t
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Erased\n");
 }
 
@@ -500,7 +500,7 @@ static inline int is25xp_bulkerase(struct is25xp_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Chip Erase (CER)" instruction */
 
@@ -508,7 +508,7 @@ static inline int is25xp_bulkerase(struct is25xp_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   is25xp_waitwritecomplete(priv);
 
   finfo("Return: OK\n");
@@ -540,7 +540,7 @@ static inline void is25xp_pagewrite(struct is25xp_dev_s *priv, FAR const uint8_t
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -559,7 +559,7 @@ static inline void is25xp_pagewrite(struct is25xp_dev_s *priv, FAR const uint8_t
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 
@@ -587,7 +587,7 @@ static inline void is25xp_bytewrite(struct is25xp_dev_s *priv, FAR const uint8_t
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -606,7 +606,7 @@ static inline void is25xp_bytewrite(struct is25xp_dev_s *priv, FAR const uint8_t
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 #endif
@@ -762,7 +762,7 @@ static ssize_t is25xp_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbyte
   /* Lock the SPI bus and select this FLASH part */
 
   is25xp_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -780,7 +780,7 @@ static ssize_t is25xp_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbyte
 
   /* Deselect the FLASH and unlock the SPI bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   is25xp_unlock(priv->dev);
   finfo("return nbytes: %d\n", (int)nbytes);
   return nbytes;
@@ -943,7 +943,7 @@ FAR struct mtd_dev_s *is25xp_initialize(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -967,7 +967,7 @@ FAR struct mtd_dev_s *is25xp_initialize(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/m25px.c

@@ -317,7 +317,7 @@ static inline int m25p_readid(struct m25p_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   m25p_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -328,7 +328,7 @@ static inline int m25p_readid(struct m25p_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   m25p_unlock(priv->dev);
 
   finfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -432,7 +432,7 @@ static void m25p_waitwritecomplete(struct m25p_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -444,7 +444,7 @@ static void m25p_waitwritecomplete(struct m25p_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -471,7 +471,7 @@ static void m25p_writeenable(struct m25p_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -479,7 +479,7 @@ static void m25p_writeenable(struct m25p_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Enabled\n");
 }
 
@@ -518,7 +518,7 @@ static void m25p_sectorerase(struct m25p_dev_s *priv, off_t sector, uint8_t type
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" or Sub-Sector Erase (SSE) instruction
    * that was passed in as the erase type.
@@ -537,7 +537,7 @@ static void m25p_sectorerase(struct m25p_dev_s *priv, off_t sector, uint8_t type
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Erased\n");
 }
 
@@ -563,7 +563,7 @@ static inline int m25p_bulkerase(struct m25p_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Bulk Erase (BE)" instruction */
 
@@ -571,7 +571,7 @@ static inline int m25p_bulkerase(struct m25p_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Return: OK\n");
   return OK;
 }
@@ -601,7 +601,7 @@ static inline void m25p_pagewrite(struct m25p_dev_s *priv, FAR const uint8_t *bu
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -619,7 +619,7 @@ static inline void m25p_pagewrite(struct m25p_dev_s *priv, FAR const uint8_t *bu
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 
@@ -647,7 +647,7 @@ static inline void m25p_bytewrite(struct m25p_dev_s *priv, FAR const uint8_t *bu
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -665,7 +665,7 @@ static inline void m25p_bytewrite(struct m25p_dev_s *priv, FAR const uint8_t *bu
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 #endif
@@ -809,7 +809,7 @@ static ssize_t m25p_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
   /* Lock the SPI bus and select this FLASH part */
 
   m25p_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -827,7 +827,7 @@ static ssize_t m25p_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes,
 
   /* Deselect the FLASH and unlock the SPI bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   m25p_unlock(priv->dev);
   finfo("return nbytes: %d\n", (int)nbytes);
   return nbytes;
@@ -999,7 +999,7 @@ FAR struct mtd_dev_s *m25p_initialize(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -1022,7 +1022,7 @@ FAR struct mtd_dev_s *m25p_initialize(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/mtd_rwbuffer.c

@@ -352,7 +352,7 @@ FAR struct mtd_dev_s *mtd_rwb_initialize(FAR struct mtd_dev_s *mtd)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 

drivers/mtd/mx25lx.c

@@ -314,7 +314,7 @@ static inline int mx25l_readid(FAR struct mx25l_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   mx25l_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -325,7 +325,7 @@ static inline int mx25l_readid(FAR struct mx25l_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   mx25l_unlock(priv->dev);
 
   mxlinfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -374,7 +374,7 @@ static void mx25l_waitwritecomplete(FAR struct mx25l_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -386,7 +386,7 @@ static void mx25l_waitwritecomplete(FAR struct mx25l_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -413,7 +413,7 @@ static void mx25l_writeenable(FAR struct mx25l_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -421,7 +421,7 @@ static void mx25l_writeenable(FAR struct mx25l_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   mxlinfo("Enabled\n");
 }
@@ -434,7 +434,7 @@ static void mx25l_writedisable(FAR struct mx25l_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Disable (WRDI)" command */
 
@@ -442,7 +442,7 @@ static void mx25l_writedisable(FAR struct mx25l_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   mxlinfo("Disabled\n");
 }
@@ -465,7 +465,7 @@ static void mx25l_sectorerase(FAR struct mx25l_dev_s *priv, off_t sector)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" or "Block Erase (BE)" instruction
    * that was passed in as the erase type.
@@ -484,7 +484,7 @@ static void mx25l_sectorerase(FAR struct mx25l_dev_s *priv, off_t sector)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   mx25l_waitwritecomplete(priv);
 
@@ -505,7 +505,7 @@ static inline int mx25l_chiperase(FAR struct mx25l_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Chip Erase (CE)" instruction */
 
@@ -513,7 +513,7 @@ static inline int mx25l_chiperase(FAR struct mx25l_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   mx25l_waitwritecomplete(priv);
 
@@ -540,7 +540,7 @@ static void mx25l_byteread(FAR struct mx25l_dev_s *priv, FAR uint8_t *buffer,
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -562,7 +562,7 @@ static void mx25l_byteread(FAR struct mx25l_dev_s *priv, FAR uint8_t *buffer,
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -583,7 +583,7 @@ static inline void mx25l_pagewrite(FAR struct mx25l_dev_s *priv,
       
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send the "Page Program (MX25L_PP)" Command */
 
@@ -601,7 +601,7 @@ static inline void mx25l_pagewrite(FAR struct mx25l_dev_s *priv,
 
       /* Deselect the FLASH and setup for the next pass through the loop */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
       
       /* Wait for any preceding write or erase operation to complete. */
 
@@ -988,7 +988,7 @@ FAR struct mtd_dev_s *mx25l_initialize_spi(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -1008,7 +1008,7 @@ FAR struct mtd_dev_s *mx25l_initialize_spi(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/n25qxxx.c

@@ -1406,7 +1406,7 @@ FAR struct mtd_dev_s *n25qxxx_initialize(FAR struct qspi_dev_s *qspi, bool unpro
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per QuadSPI
-   * device (only because of the QSPIDEV_FLASH definition) and so would have
+   * device (only because of the QSPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same QuadSPI bus.
    */
 

drivers/mtd/ramtron.c

@@ -381,7 +381,7 @@ static inline int ramtron_readid(struct ramtron_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   ramtron_lock(priv);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command */
 
@@ -411,7 +411,7 @@ static inline int ramtron_readid(struct ramtron_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   ramtron_unlock(priv->dev);
 
   /* Select part from the part list */
@@ -452,7 +452,7 @@ static int ramtron_waitwritecomplete(struct ramtron_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read Status Register (RDSR)" command */
 
@@ -475,7 +475,7 @@ static int ramtron_waitwritecomplete(struct ramtron_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   if (retries > 0)
     {
@@ -499,7 +499,7 @@ static void ramtron_writeenable(struct ramtron_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -507,7 +507,7 @@ static void ramtron_writeenable(struct ramtron_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Enabled\n");
 }
 
@@ -555,7 +555,7 @@ static inline int ramtron_pagewrite(struct ramtron_dev_s *priv, FAR const uint8_
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -571,7 +571,7 @@ static inline int ramtron_pagewrite(struct ramtron_dev_s *priv, FAR const uint8_
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 
 #ifdef CONFIG_RAMTRON_WRITEWAIT
@@ -676,7 +676,7 @@ static ssize_t ramtron_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbyt
   /* Lock the SPI bus and select this FLASH part */
 
   ramtron_lock(priv);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -709,7 +709,7 @@ static ssize_t ramtron_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbyt
 
   /* Deselect the FLASH and unlock the SPI bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   ramtron_unlock(priv->dev);
 
   finfo("return nbytes: %d\n", (int)nbytes);
@@ -805,7 +805,7 @@ FAR struct mtd_dev_s *ramtron_initialize(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -825,7 +825,7 @@ FAR struct mtd_dev_s *ramtron_initialize(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/s25fl1.c

@@ -1453,7 +1453,7 @@ FAR struct mtd_dev_s *s25fl1_initialize(FAR struct qspi_dev_s *qspi, bool unprot
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per QuadSPI
-   * device (only because of the QSPIDEV_FLASH definition) and so would have
+   * device (only because of the QSPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same QuadSPI bus.
    */
 

drivers/mtd/sector512.c

@@ -599,7 +599,7 @@ FAR struct mtd_dev_s *s512_initialize(FAR struct mtd_dev_s *mtd)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 

drivers/mtd/sst25.c

@@ -314,7 +314,7 @@ static inline int sst25_readid(struct sst25_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   sst25_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -325,7 +325,7 @@ static inline int sst25_readid(struct sst25_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   sst25_unlock(priv->dev);
 
   finfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -376,7 +376,7 @@ static void sst25_unprotect(struct sst25_dev_s *priv)
 
   /* Send "Write enable status (WRSR)" */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   SPI_SEND(priv->dev, SST25_WRSR);
 
@@ -384,7 +384,7 @@ static void sst25_unprotect(struct sst25_dev_s *priv)
 
   SPI_SEND(priv->dev, 0);
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 #endif
 
@@ -402,7 +402,7 @@ static uint8_t sst25_waitwritecomplete(struct sst25_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -414,7 +414,7 @@ static uint8_t sst25_waitwritecomplete(struct sst25_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -443,7 +443,7 @@ static inline void sst25_cmd(struct sst25_dev_s *priv, uint8_t cmd)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send command */
 
@@ -451,7 +451,7 @@ static inline void sst25_cmd(struct sst25_dev_s *priv, uint8_t cmd)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -498,7 +498,7 @@ static void sst25_sectorerase(struct sst25_dev_s *priv, off_t sector)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" instruction */
 
@@ -514,7 +514,7 @@ static void sst25_sectorerase(struct sst25_dev_s *priv, off_t sector)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -560,7 +560,7 @@ static void sst25_byteread(FAR struct sst25_dev_s *priv, FAR uint8_t *buffer,
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -588,7 +588,7 @@ static void sst25_byteread(FAR struct sst25_dev_s *priv, FAR uint8_t *buffer,
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -623,7 +623,7 @@ static void sst25_bytewrite(struct sst25_dev_s *priv, FAR const uint8_t *buffer,
 
           /* Select this FLASH part */
 
-          SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+          SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
           /* Send "Byte Program (BP)" command */
 
@@ -641,7 +641,7 @@ static void sst25_bytewrite(struct sst25_dev_s *priv, FAR const uint8_t *buffer,
 
           /* Deselect the FLASH and setup for the next pass through the loop */
 
-          SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+          SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
         }
 
       /* Advance to the next byte */
@@ -704,7 +704,7 @@ static void sst25_wordwrite(struct sst25_dev_s *priv, FAR const uint8_t *buffer,
 
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Auto Address Increment (AAI)" command */
 
@@ -722,7 +722,7 @@ static void sst25_wordwrite(struct sst25_dev_s *priv, FAR const uint8_t *buffer,
 
       /* Deselect the FLASH: Chip Select high */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Wait for the preceding write to complete. */
 
@@ -749,7 +749,7 @@ static void sst25_wordwrite(struct sst25_dev_s *priv, FAR const uint8_t *buffer,
 
           /* Select this FLASH part */
 
-          SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+          SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
           /* Send "Auto Address Increment (AAI)" command with no address */
 
@@ -761,7 +761,7 @@ static void sst25_wordwrite(struct sst25_dev_s *priv, FAR const uint8_t *buffer,
 
           /* Deselect the FLASH: Chip Select high */
 
-          SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+          SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
           /* Wait for the preceding write to complete. */
 
@@ -1177,7 +1177,7 @@ FAR struct mtd_dev_s *sst25_initialize(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -1197,7 +1197,7 @@ FAR struct mtd_dev_s *sst25_initialize(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/sst25xx.c

@@ -264,19 +264,19 @@ static inline int sst25xx_readid(struct sst25xx_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   sst25xx_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
   (void)SPI_SEND(priv->dev, SST25_RDID);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
   manufacturer = SPI_SEND(priv->dev, SST25_DUMMY);
   memory       = SPI_SEND(priv->dev, SST25_DUMMY);
   capacity     = SPI_SEND(priv->dev, SST25_DUMMY);
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   sst25xx_unlock(priv->dev);
 
   finfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -326,7 +326,7 @@ static void sst25xx_waitwritecomplete(struct sst25xx_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -338,7 +338,7 @@ static void sst25xx_waitwritecomplete(struct sst25xx_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -367,7 +367,7 @@ static void sst25xx_writeenable(struct sst25xx_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -375,7 +375,7 @@ static void sst25xx_writeenable(struct sst25xx_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Enabled\n");
 }
 
@@ -387,23 +387,23 @@ static void sst25xx_unprotect(struct sst25xx_dev_s *priv)
 {
   /* Send "Write enable status (EWSR)" */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
   (void)SPI_SEND(priv->dev, SST25_EWSR);
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   /* Send "Write status (WRSR)" */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
   SPI_SEND(priv->dev, SST25_WRSR);
 
   /* Followed by the new status value */
 
   SPI_SEND(priv->dev, 0);
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -432,7 +432,7 @@ static void sst25xx_sectorerase(struct sst25xx_dev_s *priv, off_t sector, uint8_
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" or Sub-Sector Erase (SSE) instruction
    * that was passed in as the erase type.
@@ -452,7 +452,7 @@ static void sst25xx_sectorerase(struct sst25xx_dev_s *priv, off_t sector, uint8_
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Erased\n");
 }
 
@@ -478,7 +478,7 @@ static inline int sst25xx_bulkerase(struct sst25xx_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Bulk Erase (BE)" instruction */
 
@@ -486,7 +486,7 @@ static inline int sst25xx_bulkerase(struct sst25xx_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   sst25xx_waitwritecomplete(priv);
 
   finfo("Return: OK\n");
@@ -518,7 +518,7 @@ static inline void sst25xx_pagewrite(struct sst25xx_dev_s *priv, FAR const uint8
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -537,7 +537,7 @@ static inline void sst25xx_pagewrite(struct sst25xx_dev_s *priv, FAR const uint8
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 
@@ -565,7 +565,7 @@ static inline void sst25xx_bytewrite(struct sst25xx_dev_s *priv, FAR const uint8
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -584,7 +584,7 @@ static inline void sst25xx_bytewrite(struct sst25xx_dev_s *priv, FAR const uint8
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 #endif
@@ -740,7 +740,7 @@ static ssize_t sst25xx_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbyt
   /* Lock the SPI bus and select this FLASH part */
 
   sst25xx_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -758,7 +758,7 @@ static ssize_t sst25xx_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbyt
 
   /* Deselect the FLASH and unlock the SPI bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   sst25xx_unlock(priv->dev);
   finfo("return nbytes: %d\n", (int)nbytes);
   return nbytes;
@@ -921,7 +921,7 @@ FAR struct mtd_dev_s *sst25xx_initialize(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -945,7 +945,7 @@ FAR struct mtd_dev_s *sst25xx_initialize(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/sst26.c

@@ -323,7 +323,7 @@ static inline int sst26_readid(struct sst26_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   sst26_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -334,7 +334,7 @@ static inline int sst26_readid(struct sst26_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   sst26_unlock(priv->dev);
 
   sstinfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -385,7 +385,7 @@ static void sst26_waitwritecomplete(struct sst26_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -397,7 +397,7 @@ static void sst26_waitwritecomplete(struct sst26_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -426,7 +426,7 @@ static void sst26_globalunlock(struct sst26_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Global Unlock (ULBPR)" command */
 
@@ -434,7 +434,7 @@ static void sst26_globalunlock(struct sst26_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sstinfo("Device unlocked.\n");
 }
@@ -447,7 +447,7 @@ static void sst26_writeenable(struct sst26_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -455,7 +455,7 @@ static void sst26_writeenable(struct sst26_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sstinfo("Enabled\n");
 }
@@ -468,7 +468,7 @@ static void sst26_writedisable(struct sst26_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Write Disable (WRDI)" command */
 
@@ -476,7 +476,7 @@ static void sst26_writedisable(struct sst26_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sstinfo("Disabled\n");
 }
@@ -499,7 +499,7 @@ static void sst26_sectorerase(struct sst26_dev_s *priv, off_t sector, uint8_t ty
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" or "Block Erase (BE)" instruction
    * that was passed in as the erase type.
@@ -518,7 +518,7 @@ static void sst26_sectorerase(struct sst26_dev_s *priv, off_t sector, uint8_t ty
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sst26_waitwritecomplete(priv);
 
@@ -539,7 +539,7 @@ static inline int sst26_chiperase(struct sst26_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send the "Chip Erase (CE)" instruction */
 
@@ -547,7 +547,7 @@ static inline int sst26_chiperase(struct sst26_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sst26_waitwritecomplete(priv);
 
@@ -572,7 +572,7 @@ static inline void sst26_pagewrite(struct sst26_dev_s *priv,
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -590,7 +590,7 @@ static inline void sst26_pagewrite(struct sst26_dev_s *priv,
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sst26_waitwritecomplete(priv);
 
@@ -614,7 +614,7 @@ static inline void sst26_bytewrite(struct sst26_dev_s *priv,
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -633,7 +633,7 @@ static inline void sst26_bytewrite(struct sst26_dev_s *priv,
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
 
   sst26_waitwritecomplete(priv);
 
@@ -737,7 +737,7 @@ static ssize_t sst26_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes
   /* Lock the SPI bus and select this FLASH part */
 
   sst26_lock(priv->dev);
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -759,7 +759,7 @@ static ssize_t sst26_read(FAR struct mtd_dev_s *dev, off_t offset, size_t nbytes
 
   /* Deselect the FLASH and unlock the SPI bus */
 
-  SPI_SELECT(priv->dev, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->dev, SPIDEV_FLASH(0), false);
   sst26_unlock(priv->dev);
   sstinfo("return nbytes: %d\n", (int)nbytes);
   return nbytes;
@@ -922,7 +922,7 @@ FAR struct mtd_dev_s *sst26_initialize_spi(FAR struct spi_dev_s *dev)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -945,7 +945,7 @@ FAR struct mtd_dev_s *sst26_initialize_spi(FAR struct spi_dev_s *dev)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(dev, SPIDEV_FLASH, false);
+      SPI_SELECT(dev, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/mtd/w25.c

@@ -338,7 +338,7 @@ static inline int w25_readid(struct w25_dev_s *priv)
   /* Lock the SPI bus, configure the bus, and select this FLASH part. */
 
   w25_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send the "Read ID (RDID)" command and read the first three ID bytes */
 
@@ -349,7 +349,7 @@ static inline int w25_readid(struct w25_dev_s *priv)
 
   /* Deselect the FLASH and unlock the bus */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
   w25_unlock(priv->spi);
 
   finfo("manufacturer: %02x memory: %02x capacity: %02x\n",
@@ -440,7 +440,7 @@ static void w25_unprotect(FAR struct w25_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send "Write enable (WREN)" */
 
@@ -450,8 +450,8 @@ static void w25_unprotect(FAR struct w25_dev_s *priv)
    * the SST25 timing diagrams from which this code was leveraged.)
    */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send "Write enable status (EWSR)" */
 
@@ -478,7 +478,7 @@ static uint8_t w25_waitwritecomplete(struct w25_dev_s *priv)
     {
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
       /* Send "Read Status Register (RDSR)" command */
 
@@ -490,7 +490,7 @@ static uint8_t w25_waitwritecomplete(struct w25_dev_s *priv)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
       /* Given that writing could take up to few tens of milliseconds, and erasing
        * could take more.  The following short delay in the "busy" case will allow
@@ -519,7 +519,7 @@ static inline void w25_wren(struct w25_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send "Write Enable (WREN)" command */
 
@@ -527,7 +527,7 @@ static inline void w25_wren(struct w25_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -538,7 +538,7 @@ static inline void w25_wrdi(struct w25_dev_s *priv)
 {
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send "Write Disable (WRDI)" command */
 
@@ -546,7 +546,7 @@ static inline void w25_wrdi(struct w25_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -569,7 +569,7 @@ static void w25_sectorerase(struct w25_dev_s *priv, off_t sector)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send the "Sector Erase (SE)" instruction */
 
@@ -585,7 +585,7 @@ static void w25_sectorerase(struct w25_dev_s *priv, off_t sector)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -606,7 +606,7 @@ static inline int w25_chiperase(struct w25_dev_s *priv)
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send the "Chip Erase (CE)" instruction */
 
@@ -614,7 +614,7 @@ static inline int w25_chiperase(struct w25_dev_s *priv)
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
   finfo("Return: OK\n");
   return OK;
 }
@@ -641,7 +641,7 @@ static void w25_byteread(FAR struct w25_dev_s *priv, FAR uint8_t *buffer,
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send "Read from Memory " instruction */
 
@@ -669,7 +669,7 @@ static void w25_byteread(FAR struct w25_dev_s *priv, FAR uint8_t *buffer,
 
   /* Deselect the FLASH */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 }
 
 /************************************************************************************
@@ -699,7 +699,7 @@ static void w25_pagewrite(struct w25_dev_s *priv, FAR const uint8_t *buffer,
 
       /* Select this FLASH part */
 
-      SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+      SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
       /* Send the "Page Program (W25_PP)" Command */
 
@@ -717,7 +717,7 @@ static void w25_pagewrite(struct w25_dev_s *priv, FAR const uint8_t *buffer,
 
       /* Deselect the FLASH and setup for the next pass through the loop */
 
-      SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+      SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
 
       /* Update addresses */
 
@@ -755,7 +755,7 @@ static inline void w25_bytewrite(struct w25_dev_s *priv, FAR const uint8_t *buff
 
   /* Select this FLASH part */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, true);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), true);
 
   /* Send "Page Program (PP)" command */
 
@@ -773,7 +773,7 @@ static inline void w25_bytewrite(struct w25_dev_s *priv, FAR const uint8_t *buff
 
   /* Deselect the FLASH: Chip Select high */
 
-  SPI_SELECT(priv->spi, SPIDEV_FLASH, false);
+  SPI_SELECT(priv->spi, SPIDEV_FLASH(0), false);
   finfo("Written\n");
 }
 #endif /* defined(CONFIG_MTD_BYTE_WRITE) && !defined(CONFIG_W25_READONLY) */
@@ -1224,7 +1224,7 @@ FAR struct mtd_dev_s *w25_initialize(FAR struct spi_dev_s *spi)
   /* Allocate a state structure (we allocate the structure instead of using
    * a fixed, static allocation so that we can handle multiple FLASH devices.
    * The current implementation would handle only one FLASH part per SPI
-   * device (only because of the SPIDEV_FLASH definition) and so would have
+   * device (only because of the SPIDEV_FLASH(0) definition) and so would have
    * to be extended to handle multiple FLASH parts on the same SPI bus.
    */
 
@@ -1247,7 +1247,7 @@ FAR struct mtd_dev_s *w25_initialize(FAR struct spi_dev_s *spi)
 
       /* Deselect the FLASH */
 
-      SPI_SELECT(spi, SPIDEV_FLASH, false);
+      SPI_SELECT(spi, SPIDEV_FLASH(0), false);
 
       /* Identify the FLASH chip and get its capacity */
 

drivers/net/enc28j60.c

@@ -466,7 +466,7 @@ static uint8_t enc_rdgreg2(FAR struct enc_driver_s *priv, uint8_t cmd)
 
   /* Select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the read command and collect the data.  The sequence requires
    * 16-clocks:  8 to clock out the cmd + 8 to clock in the data.
@@ -477,7 +477,7 @@ static uint8_t enc_rdgreg2(FAR struct enc_driver_s *priv, uint8_t cmd)
 
   /* De-select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
 
   enc_rddump(cmd, rddata);
   return rddata;
@@ -509,7 +509,7 @@ static void enc_wrgreg2(FAR struct enc_driver_s *priv, uint8_t cmd,
 
   /* Select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the write command and data.  The sequence requires 16-clocks:
    * 8 to clock out the cmd + 8 to clock out the data.
@@ -520,7 +520,7 @@ static void enc_wrgreg2(FAR struct enc_driver_s *priv, uint8_t cmd,
 
   /* De-select ENC28J60 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_wrdump(cmd, wrdata);
 }
 
@@ -553,7 +553,7 @@ static inline void enc_src(FAR struct enc_driver_s *priv)
 
   /* Select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the system reset command. */
 
@@ -574,7 +574,7 @@ static inline void enc_src(FAR struct enc_driver_s *priv)
 
   /* De-select ENC28J60 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_cmddump(ENC_SRC);
 }
 
@@ -650,7 +650,7 @@ static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
 
   /* Re-select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the RCR command and collect the data.  How we collect the data
    * depends on if this is a PHY/CAN or not.  The normal sequence requires
@@ -671,7 +671,7 @@ static uint8_t enc_rdbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg)
 
   /* De-select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_rddump(ENC_RCR | GETADDR(ctrlreg), rddata);
   return rddata;
 }
@@ -707,7 +707,7 @@ static void enc_wrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
 
   /* Re-select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the WCR command and data.  The sequence requires 16-clocks:
    * 8 to clock out the cmd + 8 to clock out the data.
@@ -718,7 +718,7 @@ static void enc_wrbreg(FAR struct enc_driver_s *priv, uint8_t ctrlreg,
 
   /* De-select ENC28J60 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_wrdump(ENC_WCR | GETADDR(ctrlreg), wrdata);
 }
 
@@ -861,7 +861,7 @@ static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
 
   /* Select ENC28J60 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the read buffer memory command (ignoring the response) */
 
@@ -873,7 +873,7 @@ static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
 
   /* De-select ENC28J60 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_bmdump(ENC_WBM, buffer, buflen);
 }
 
@@ -906,7 +906,7 @@ static inline void enc_wrbuffer(FAR struct enc_driver_s *priv,
    * "The WBM command is started by lowering the CS pin. ..."
    */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the write buffer memory command (ignoring the response)
    *
@@ -956,7 +956,7 @@ static inline void enc_wrbuffer(FAR struct enc_driver_s *priv,
    * "The WBM command is terminated by bringing up the CS pin. ..."
    */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_bmdump(ENC_WBM, buffer, buflen+1);
 }
 

drivers/net/encx24j600.c

@@ -458,7 +458,7 @@ static void enc_cmd(FAR struct enc_driver_s *priv, uint8_t cmd, uint16_t arg)
 
   /* Select ENCX24J600 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   (void)SPI_SEND(priv->spi, cmd);          /* Clock out the command */
   (void)SPI_SEND(priv->spi, arg & 0xff);   /* Clock out the low byte */
@@ -466,7 +466,7 @@ static void enc_cmd(FAR struct enc_driver_s *priv, uint8_t cmd, uint16_t arg)
 
   /* De-select ENCX24J600 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_wrdump(cmd, arg);
 }
 
@@ -492,7 +492,7 @@ static inline void enc_setethrst(FAR struct enc_driver_s *priv)
 
   /* Select ENCX24J600 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the system reset command. */
 
@@ -502,7 +502,7 @@ static inline void enc_setethrst(FAR struct enc_driver_s *priv)
 
   /* De-select ENCX24J600 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_cmddump(ENC_SETETHRST);
 }
 
@@ -570,7 +570,7 @@ static uint16_t enc_rdreg(FAR struct enc_driver_s *priv, uint16_t ctrlreg)
   DEBUGASSERT(priv && priv->spi);
   DEBUGASSERT((ctrlreg & 0xe0) == 0); /* banked regeitsers only */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   enc_setbank(priv, GETBANK(ctrlreg));
 
@@ -580,7 +580,7 @@ static uint16_t enc_rdreg(FAR struct enc_driver_s *priv, uint16_t ctrlreg)
   rddata |= SPI_SEND(priv->spi, 0) << 8;  /* Clock in the high byte */
 
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_rddump(GETADDR(ctrlreg), rddata);
 
   return rddata;
@@ -610,7 +610,7 @@ static void enc_wrreg(FAR struct enc_driver_s *priv, uint16_t ctrlreg,
   DEBUGASSERT(priv && priv->spi);
   DEBUGASSERT((ctrlreg & 0xe0) == 0); /* banked regeitsers only */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   enc_setbank(priv, GETBANK(ctrlreg));
 
@@ -618,7 +618,7 @@ static void enc_wrreg(FAR struct enc_driver_s *priv, uint16_t ctrlreg,
   SPI_SEND(priv->spi, wrdata & 0xff); /* Clock out the low byte */
   SPI_SEND(priv->spi, wrdata >> 8);   /* Clock out the high byte */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_wrdump(GETADDR(ctrlreg), wrdata);
 }
 
@@ -688,7 +688,7 @@ static void enc_bfs(FAR struct enc_driver_s *priv, uint16_t ctrlreg,
 
   /* Select ENCX24J600 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Set the bank */
 
@@ -704,7 +704,7 @@ static void enc_bfs(FAR struct enc_driver_s *priv, uint16_t ctrlreg,
 
   /* De-select ENCX24J600 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_bfsdump(GETADDR(ctrlreg), bits);
 }
 
@@ -733,7 +733,7 @@ static void enc_bfc(FAR struct enc_driver_s *priv, uint16_t ctrlreg,
 
   /* Select ENCX24J600 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Set the bank */
 
@@ -749,7 +749,7 @@ static void enc_bfc(FAR struct enc_driver_s *priv, uint16_t ctrlreg,
 
   /* De-select ENCX24J600 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_bfcdump(GETADDR(ctrlreg), bits);
 }
 
@@ -851,7 +851,7 @@ static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
 
   /* Select ENCX24J600 chip */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   /* Send the read buffer memory command (ignoring the response) */
 
@@ -863,7 +863,7 @@ static void enc_rdbuffer(FAR struct enc_driver_s *priv, FAR uint8_t *buffer,
 
   /* De-select ENCX24J600 chip. */
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_bmdump(ENC_RRXDATA, buffer, buflen);
 }
 
@@ -891,12 +891,12 @@ static inline void enc_wrbuffer(FAR struct enc_driver_s *priv,
 {
   DEBUGASSERT(priv && priv->spi);
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, true);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), true);
 
   SPI_SEND(priv->spi, ENC_WGPDATA);
   SPI_SNDBLOCK(priv->spi, buffer, buflen);
 
-  SPI_SELECT(priv->spi, SPIDEV_ETHERNET, false);
+  SPI_SELECT(priv->spi, SPIDEV_ETHERNET(0), false);
   enc_bmdump(ENC_WGPDATA, buffer, buflen);
 }
 

drivers/sensors/adxl345_spi.c

@@ -97,7 +97,7 @@ uint8_t adxl345_getreg8(FAR struct adxl345_dev_s *priv, uint8_t regaddr)
 
   /* Select the ADXL345 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, true);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), true);
 
   /* Send register to read and get the next byte */
 
@@ -106,7 +106,7 @@ uint8_t adxl345_getreg8(FAR struct adxl345_dev_s *priv, uint8_t regaddr)
 
   /* Deselect the ADXL345 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, false);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), false);
 
   /* Unlock bus */
 
@@ -140,7 +140,7 @@ void adxl345_putreg8(FAR struct adxl345_dev_s *priv, uint8_t regaddr,
 
   /* Select the ADXL345 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, true);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), true);
 
   /* Send register address and set the value */
 
@@ -149,7 +149,7 @@ void adxl345_putreg8(FAR struct adxl345_dev_s *priv, uint8_t regaddr,
 
   /* Deselect the ADXL345 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, false);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), false);
 
   /* Unlock bus */
 
@@ -175,7 +175,7 @@ uint16_t adxl345_getreg16(FAR struct adxl345_dev_s *priv, uint8_t regaddr)
 
   /* Select the ADXL345 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, true);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), true);
 
   /* Send register to read and get the next 2 bytes */
 
@@ -184,7 +184,7 @@ uint16_t adxl345_getreg16(FAR struct adxl345_dev_s *priv, uint8_t regaddr)
 
   /* Deselect the ADXL345 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, false);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), false);
 
   /* Unlock bus */
 

drivers/sensors/max31855.c

@@ -203,7 +203,7 @@ static ssize_t max31855_read(FAR struct file *filep, FAR char *buffer, size_t bu
   /* Enable MAX31855's chip select */
 
   max31855_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE, true);
+  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE(0), true);
 
   /* Read temperature */
 
@@ -211,7 +211,7 @@ static ssize_t max31855_read(FAR struct file *filep, FAR char *buffer, size_t bu
 
   /* Disable MAX31855's chip select */
 
-  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE, false);
+  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE(0), false);
   max31855_unlock(priv->spi);
 
   regval  = (regmsb & 0xFF000000) >> 24;

drivers/sensors/max6675.c

@@ -199,7 +199,7 @@ static ssize_t max6675_read(FAR struct file *filep, FAR char *buffer, size_t buf
   /* Enable MAX6675's chip select */
 
   max6675_lock(priv->spi);
-  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE, true);
+  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE(0), true);
 
   /* Read temperature */
 
@@ -207,7 +207,7 @@ static ssize_t max6675_read(FAR struct file *filep, FAR char *buffer, size_t buf
 
   /* Disable MAX6675's chip select */
 
-  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE, false);
+  SPI_SELECT(priv->spi, SPIDEV_TEMPERATURE(0), false);
   max6675_unlock(priv->spi);
 
   regval  = (regmsb & 0xFF00) >> 8;

drivers/sensors/mpl115a.c

@@ -142,7 +142,7 @@ static uint8_t mpl115a_getreg8(FAR struct mpl115a_dev_s *priv, uint8_t regaddr)
 
   /* Select the MPL115A */
 
-  SPI_SELECT(priv->spi, SPIDEV_BAROMETER, true);
+  SPI_SELECT(priv->spi, SPIDEV_BAROMETER(0), true);
 
   /* Send register to read and get the next byte */
 
@@ -151,7 +151,7 @@ static uint8_t mpl115a_getreg8(FAR struct mpl115a_dev_s *priv, uint8_t regaddr)
 
   /* Deselect the MPL115A */
 
-  SPI_SELECT(priv->spi, SPIDEV_BAROMETER, false);
+  SPI_SELECT(priv->spi, SPIDEV_BAROMETER(0), false);
 
   /* Unlock bus */
 

drivers/sensors/xen1210.c

@@ -419,7 +419,7 @@ void xen1210_getdata(FAR struct xen1210_dev_s *priv)
 
   /* Select the XEN1210 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, true);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), true);
 
   /* Read three times 3 bytes = 24 bits * 3 */
 
@@ -434,7 +434,7 @@ void xen1210_getdata(FAR struct xen1210_dev_s *priv)
 
   /* Deselect the XEN1210 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, false);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), false);
 
   /* Unlock bus */
 
@@ -472,7 +472,7 @@ void xen1210_putdata(FAR struct xen1210_dev_s *priv, uint32_t regval)
 
   /* Select the XEN1210 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, true);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), true);
 
   /* We need to write to 3 sensors in the daisy-chain */
   /* Write three times 3 bytes */
@@ -483,7 +483,7 @@ void xen1210_putdata(FAR struct xen1210_dev_s *priv, uint32_t regval)
 
   /* Deselect the XEN1210 */
 
-  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER, false);
+  SPI_SELECT(priv->spi, SPIDEV_ACCELEROMETER(0), false);
 
   /* Unlock bus */
 

drivers/wireless/cc1101.c

@@ -312,7 +312,7 @@ static volatile int cc1101_interrupt = 0;
 void cc1101_access_begin(FAR struct cc1101_dev_s *dev)
 {
   (void)SPI_LOCK(dev->spi, true);
-  SPI_SELECT(dev->spi, SPIDEV_WIRELESS, true);
+  SPI_SELECT(dev->spi, SPIDEV_WIRELESS(0), true);
   SPI_SETMODE(dev->spi, SPIDEV_MODE0);     /* CPOL=0, CPHA=0 */
   SPI_SETBITS(dev->spi, 8);
   (void)SPI_HWFEATURES(dev->spi, 0);
@@ -320,7 +320,7 @@ void cc1101_access_begin(FAR struct cc1101_dev_s *dev)
 
 void cc1101_access_end(FAR struct cc1101_dev_s *dev)
 {
-  SPI_SELECT(dev->spi, SPIDEV_WIRELESS, false);
+  SPI_SELECT(dev->spi, SPIDEV_WIRELESS(0), false);
   (void)SPI_LOCK(dev->spi, false);
 }
 

drivers/wireless/cc3000/cc3000.c

@@ -289,7 +289,7 @@ static void cc3000_lock_and_select(FAR struct spi_dev_s *spi)
    */
 
   cc3000_configspi(spi);
-  SPI_SELECT(spi, SPIDEV_WIRELESS, true);
+  SPI_SELECT(spi, SPIDEV_WIRELESS(0), true);
 }
 
 /****************************************************************************
@@ -313,7 +313,7 @@ static void cc3000_deselect_and_unlock(FAR struct spi_dev_s *spi)
 {
    /* De select */
 
-  SPI_SELECT(spi, SPIDEV_WIRELESS, false);
+  SPI_SELECT(spi, SPIDEV_WIRELESS(0), false);
 
   /* Relinquish the SPI bus. */
 

drivers/wireless/ieee802154/mrf24j40.c

@@ -513,9 +513,9 @@ static void mrf24j40_setreg(FAR struct spi_dev_s *spi, uint32_t addr,
   buf[len++] = val;
 
   mrf24j40_spi_lock(spi);
-  SPI_SELECT(spi, SPIDEV_IEEE802154, true);
+  SPI_SELECT(spi, SPIDEV_IEEE802154(0), true);
   SPI_SNDBLOCK(spi, buf, len);
-  SPI_SELECT(spi, SPIDEV_IEEE802154, false);
+  SPI_SELECT(spi, SPIDEV_IEEE802154(0), false);
   mrf24j40_spi_unlock(spi);
 }
 
@@ -557,9 +557,9 @@ static uint8_t mrf24j40_getreg(FAR struct spi_dev_s *spi, uint32_t addr)
   buf[len++] = 0xFF; /* dummy */
 
   mrf24j40_spi_lock  (spi);
-  SPI_SELECT     (spi, SPIDEV_IEEE802154, true);
+  SPI_SELECT     (spi, SPIDEV_IEEE802154(0), true);
   SPI_EXCHANGE   (spi, buf, rx, len);
-  SPI_SELECT     (spi, SPIDEV_IEEE802154, false);
+  SPI_SELECT     (spi, SPIDEV_IEEE802154(0), false);
   mrf24j40_spi_unlock(spi);
 
   /* wlinfo("r[%04X]=%02X\n", addr, rx[len - 1]); */

drivers/wireless/nrf24l01.c

@@ -281,12 +281,12 @@ static void nrf24l01_lock(FAR struct spi_dev_s *spi)
    * unlocked)
    */
 
-  SPI_SELECT(spi, SPIDEV_WIRELESS, true);
+  SPI_SELECT(spi, SPIDEV_WIRELESS(0), true);
   SPI_SETMODE(spi, SPIDEV_MODE0);
   SPI_SETBITS(spi, 8);
   (void)SPI_HWFEATURES(spi, 0);
   (void)SPI_SETFREQUENCY(spi, NRF24L01_SPIFREQ);
-  SPI_SELECT(spi, SPIDEV_WIRELESS, false);
+  SPI_SELECT(spi, SPIDEV_WIRELESS(0), false);
 }
 
 /****************************************************************************
@@ -333,12 +333,12 @@ static inline void nrf24l01_configspi(FAR struct spi_dev_s *spi)
 {
   /* Configure SPI for the NRF24L01 module. */
 
-  SPI_SELECT(spi, SPIDEV_WIRELESS, true);  /* Useful ? */
+  SPI_SELECT(spi, SPIDEV_WIRELESS(0), true);  /* Useful ? */
   SPI_SETMODE(spi, SPIDEV_MODE0);
   SPI_SETBITS(spi, 8);
   (void)SPI_HWFEATURES(spi, 0);
   (void)SPI_SETFREQUENCY(spi, NRF24L01_SPIFREQ);
-  SPI_SELECT(spi, SPIDEV_WIRELESS, false);
+  SPI_SELECT(spi, SPIDEV_WIRELESS(0), false);
 }
 
 /****************************************************************************
@@ -347,7 +347,7 @@ static inline void nrf24l01_configspi(FAR struct spi_dev_s *spi)
 
 static inline void nrf24l01_select(struct nrf24l01_dev_s * dev)
 {
-  SPI_SELECT(dev->spi, SPIDEV_WIRELESS, true);
+  SPI_SELECT(dev->spi, SPIDEV_WIRELESS(0), true);
 }
 
 /****************************************************************************
@@ -356,7 +356,7 @@ static inline void nrf24l01_select(struct nrf24l01_dev_s * dev)
 
 static inline void nrf24l01_deselect(struct nrf24l01_dev_s * dev)
 {
-  SPI_SELECT(dev->spi, SPIDEV_WIRELESS, false);
+  SPI_SELECT(dev->spi, SPIDEV_WIRELESS(0), false);
 }
 
 /****************************************************************************

include/nuttx/analog/pga11x.h

@@ -70,7 +70,7 @@
  * CONFIG_PGA11X_MULTIPLE
  *   Can be defined to support multiple PGA11X devices on board.  Each
  *   device will require a customized SPI interface to distinguish them
- *   When SPI_SELECT is called with devid=SPIDEV_MUX.
+ *   When SPI_SELECT is called with devid=SPIDEV_MUX(n).
  *
  * Other settings that effect the driver:
  *   CONFIG_DEBUG_SPI_ERR/WARN/INFO -- This will enable debug output from