Fixes for LPC1766-STK without LED support

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4256 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
patacongo 2012-01-03 16:26:00 +00:00
parent 2bc9057ed3
commit f90b79bf8b
4 changed files with 206 additions and 200 deletions

View File

@ -1,104 +1,104 @@
/****************************************************************************
* arch/arm/src/lpc17/lpc17_idle.c
*
* Copyright (C) 2011 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <arch/board/board.h>
#include <nuttx/config.h>
#include <nuttx/arch.h>
#include "up_internal.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Does the board support an IDLE LED to indicate that the board is in the
* IDLE state?
*/
#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE)
# define BEGIN_IDLE() up_ledon(LED_IDLE)
# define END_IDLE() up_ledoff(LED_IDLE)
#else
# define BEGIN_IDLE()
# define END_IDLE()
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_idle
*
* Description:
* up_idle() is the logic that will be executed when their is no other
* ready-to-run task. This is processor idle time and will continue until
* some interrupt occurs to cause a context switch from the idle task.
*
* Processing in this state may be processor-specific. e.g., this is where
* power management operations might be performed.
*
****************************************************************************/
void up_idle(void)
{
#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
/* If the system is idle and there are no timer interrupts, then process
* "fake" timer interrupts. Hopefully, something will wake up.
*/
sched_process_timer();
#else
/* Sleep until an interrupt occurs to save power */
BEGIN_IDLE();
asm("WFI");
END_IDLE();
#endif
}
/****************************************************************************
* arch/arm/src/lpc17/lpc17_idle.c
*
* Copyright (C) 2011-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
****************************************************************************/
/****************************************************************************
* Included Files
****************************************************************************/
#include <arch/board/board.h>
#include <nuttx/config.h>
#include <nuttx/arch.h>
#include "up_internal.h"
/****************************************************************************
* Pre-processor Definitions
****************************************************************************/
/* Does the board support an IDLE LED to indicate that the board is in the
* IDLE state?
*/
#if defined(CONFIG_ARCH_LEDS) && defined(LED_IDLE)
# define BEGIN_IDLE() up_ledon(LED_IDLE)
# define END_IDLE() up_ledoff(LED_IDLE)
#else
# define BEGIN_IDLE()
# define END_IDLE()
#endif
/****************************************************************************
* Private Data
****************************************************************************/
/****************************************************************************
* Private Functions
****************************************************************************/
/****************************************************************************
* Public Functions
****************************************************************************/
/****************************************************************************
* Name: up_idle
*
* Description:
* up_idle() is the logic that will be executed when their is no other
* ready-to-run task. This is processor idle time and will continue until
* some interrupt occurs to cause a context switch from the idle task.
*
* Processing in this state may be processor-specific. e.g., this is where
* power management operations might be performed.
*
****************************************************************************/
void up_idle(void)
{
#if defined(CONFIG_SUPPRESS_INTERRUPTS) || defined(CONFIG_SUPPRESS_TIMER_INTS)
/* If the system is idle and there are no timer interrupts, then process
* "fake" timer interrupts. Hopefully, something will wake up.
*/
sched_process_timer();
#else
/* Sleep until an interrupt occurs to save power */
BEGIN_IDLE();
asm("WFI");
END_IDLE();
#endif
}

View File

@ -2,7 +2,7 @@
* configs/olimex-lpc1766stk/include/board.h
* include/arch/board/board.h
*
* Copyright (C) 2010-2011 Gregory Nutt. All rights reserved.
* Copyright (C) 2010-2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
@ -43,6 +43,8 @@
#include <nuttx/config.h>
#include <stdbool.h>
#if defined(CONFIG_ARCH_IRQBUTTONS) && defined(CONFIG_GPIO_IRQ)
# include <nuttx/irq.h>
#endif

View File

@ -1,93 +1,93 @@
/************************************************************************************
* configs/olimex-lpc1766stk/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2010 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <spudmonkey@racsa.co.cr>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "lpc17_internal.h"
#include "lpc1766stk_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_boardinitialize
*
* Description:
* All LPC17xx architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void lpc17_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function lpc17_sspinitialize() has been brought into the link.
*/
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
if (lpc17_sspinitialize)
{
lpc17_sspinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
up_ledinit();
#endif
}
/************************************************************************************
* configs/olimex-lpc1766stk/src/up_boot.c
* arch/arm/src/board/up_boot.c
*
* Copyright (C) 2010, 2012 Gregory Nutt. All rights reserved.
* Author: Gregory Nutt <gnutt@nuttx.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name NuttX nor the names of its contributors may be
* used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
************************************************************************************/
/************************************************************************************
* Included Files
************************************************************************************/
#include <nuttx/config.h>
#include <debug.h>
#include <arch/board/board.h>
#include "up_arch.h"
#include "up_internal.h"
#include "lpc17_internal.h"
#include "lpc1766stk_internal.h"
/************************************************************************************
* Definitions
************************************************************************************/
/************************************************************************************
* Private Functions
************************************************************************************/
/************************************************************************************
* Public Functions
************************************************************************************/
/************************************************************************************
* Name: lpc17_boardinitialize
*
* Description:
* All LPC17xx architectures must provide the following entry point. This entry point
* is called early in the intitialization -- after all memory has been configured
* and mapped but before any devices have been initialized.
*
************************************************************************************/
void lpc17_boardinitialize(void)
{
/* Configure SSP chip selects if 1) at least one SSP is enabled, and 2) the weak
* function lpc17_sspinitialize() has been brought into the link.
*/
#if defined(CONFIG_LPC17_SSP0) || defined(CONFIG_LPC17_SSP1)
if (lpc17_sspinitialize)
{
lpc17_sspinitialize();
}
#endif
/* Configure on-board LEDs if LED support has been selected. */
#ifdef CONFIG_ARCH_LEDS
up_ledinit();
#endif
}

View File

@ -103,10 +103,14 @@ static bool g_uninitialized = true;
****************************************************************************/
/****************************************************************************
* Name: up_ledinit
* Name: lpc17_ledinit/up_ledinit
****************************************************************************/
void up_ledinit(void)
#ifndef CONFIG_ARCH_LEDS
void lpc17_ledinit(void) /* Name when invoked externally */
#else
void up_ledinit(void) /* Name when invoked via up_boot.c */
#endif
{
/* Configure all LED GPIO lines */