sergiotarxz/nuttx
sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

Cosmetic changes for coding style; removal of dangling spaces at the end of lines

Browse Source
This commit is contained in:
Gregory Nutt 2014-04-13 13:18:06 -06:00
parent ce5594d0ed
commit fb4fa33cae
6 changed files with 54 additions and 54 deletions
configs
cloudctrl/src
up_usb.c
mikroe-stm32f4/src
up_usb.c
shenzhou/src
up_usb.c
stm3220g-eval/src
up_usb.c
stm3240g-eval/src
up_usb.c
stm32f429i-disco/src
stm32_usb.c

18
configs/cloudctrl/src/up_usb.c

@ -211,14 +211,14 @@ int stm32_usbhost_initialize(void)
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG FS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_FS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
@ -234,7 +234,7 @@ int stm32_usbhost_initialize(void)
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
@ -242,9 +242,9 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
}
else
{
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
}
}

18
configs/mikroe-stm32f4/src/up_usb.c

@ -210,14 +210,14 @@ int stm32_usbhost_initialize(void)
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG FS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_FS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
@ -233,7 +233,7 @@ int stm32_usbhost_initialize(void)
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
@ -241,9 +241,9 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
}
else
{
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
}
}

18
configs/shenzhou/src/up_usb.c

@ -210,14 +210,14 @@ int stm32_usbhost_initialize(void)
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG FS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_FS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
@ -233,7 +233,7 @@ int stm32_usbhost_initialize(void)
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
@ -241,9 +241,9 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
}
else
{
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
}
}

18
configs/stm3220g-eval/src/up_usb.c

@ -210,14 +210,14 @@ int stm32_usbhost_initialize(void)
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG FS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_FS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
@ -233,7 +233,7 @@ int stm32_usbhost_initialize(void)
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
@ -241,9 +241,9 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
}
else
{
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
}
}

18
configs/stm3240g-eval/src/up_usb.c

@ -210,14 +210,14 @@ int stm32_usbhost_initialize(void)
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG FS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_FS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
@ -233,7 +233,7 @@ int stm32_usbhost_initialize(void)
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
@ -241,9 +241,9 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
stm32_gpiowrite(GPIO_OTGFS_PWRON, false);
}
else
{
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGFS_PWRON, true);
}
}

18
configs/stm32f429i-disco/src/stm32_usb.c

@ -209,14 +209,14 @@ int stm32_usbhost_initialize(void)
* Enable/disable driving of VBUS 5V output. This function must be provided be
* each platform that implements the STM32 OTG HS host interface
*
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* "On-chip 5 V VBUS generation is not supported. For this reason, a charge pump
* or, if 5 V are available on the application board, a basic power switch, must
* be added externally to drive the 5 V VBUS line. The external charge pump can
* be driven by any GPIO output. When the application decides to power on VBUS
* using the chosen GPIO, it must also set the port power bit in the host port
* control and status register (PPWR bit in OTG_HS_HPRT).
*
* "The application uses this field to control power to this port, and the core
* "The application uses this field to control power to this port, and the core
* clears this bit on an overcurrent condition."
*
* Input Parameters:
@ -232,7 +232,7 @@ int stm32_usbhost_initialize(void)
void stm32_usbhost_vbusdrive(int iface, bool enable)
{
DEBUGASSERT(iface == 0);
if (enable)
{
/* Enable the Power Switch by driving the enable pin low */
@ -240,9 +240,9 @@ void stm32_usbhost_vbusdrive(int iface, bool enable)
stm32_gpiowrite(GPIO_OTGHS_PWRON, false);
}
else
{
{
/* Disable the Power Switch by driving the enable pin high */
stm32_gpiowrite(GPIO_OTGHS_PWRON, true);
}
}