Add LPC43xx SGPIO header file
git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@4890 42af7a65-404d-4744-a932-0658087f49c3
This commit is contained in:
parent
990ac2c603
commit
fbe1a24701
@ -1,4 +1,4 @@
|
||||
/************************************************************************************
|
||||
/****************************************************************************************************
|
||||
* arch/arm/src/lpc43xx/chip/lpc4310203050_pinconfig.h
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
@ -31,37 +31,38 @@
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
************************************************************************************/
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC4310203050_PINCONF_H
|
||||
#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC4310203050_PINCONF_H
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
************************************************************************************/
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
************************************************************************************/
|
||||
****************************************************************************************************/
|
||||
/* NOTES:
|
||||
*
|
||||
* 1. These settings were taken from the LPC43_10_20_30_50 data sheet and may not be
|
||||
* applicable to any other family members.
|
||||
* 2. Initials taken from the data sheet include only function, pin set, and pin
|
||||
* number. Additional settings must be verfied before using this pin configurations.
|
||||
|
||||
* 3. Alternative pin selections are provided with a numeric suffix like _1, _2, etc.
|
||||
* Drivers, however, will use the pin selection without the numeric suffix.
|
||||
* Additional definitions are required in the board.h file to select between the
|
||||
* alternative pins. For example, if CAN1_RD connects via Pins1[18], then the
|
||||
* following definition should appear inthe board.h header file for that board:
|
||||
* 1. These settings were taken from the LPC43_10_20_30_50 data sheet and may not be applicable to
|
||||
* any other family members.
|
||||
*
|
||||
* 2. Settings taken from the data sheet include only function, pin set, and pin number. Additional
|
||||
* settings must be verfied before using these pin configurations (like pull-ups, open-drain,
|
||||
* drive strength, etc.).
|
||||
*
|
||||
* 3. Alternative pin selections are provided with a numeric suffix like _1, _2, etc. Drivers,
|
||||
* however, will use the pin selection without the numeric suffix. Additional definitions are
|
||||
* required in the board.h file to select between the alternative pins. For example, if CAN1_RD
|
||||
* connects via Pins1[18], then the following definition should appear inthe board.h header file
|
||||
* for that board:
|
||||
*
|
||||
* #define PINCONF_CAN1_RD PINCONF_CAN1_RD_1
|
||||
*
|
||||
*
|
||||
* The driver will then automatically configre Pins1[18] as the CAN1 RD pin.
|
||||
* The driver will then automatically configre Pins1[18] as the CAN1 RD pin.
|
||||
*/
|
||||
|
||||
#define PINCONF_ADC0p0 (PINCONF_ANALOG|PINCONF_FUNC0|PINCONF_PINS4|PINCONF_PIN_3)
|
||||
@ -963,16 +964,16 @@
|
||||
#define CLKCONF_SD_CLK_2 (PINCONFIG_DIGITAL|PINCONF_FUNC4|PINCONF_CLK2)
|
||||
#define CLKCONF_SSP1_SCK (PINCONFIG_DIGITAL|PINCONF_FUNC6|PINCONF_CLK0)
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************************************
|
||||
* Public Types
|
||||
************************************************************************************/
|
||||
****************************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************************************
|
||||
* Public Data
|
||||
************************************************************************************/
|
||||
****************************************************************************************************/
|
||||
|
||||
/************************************************************************************
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
************************************************************************************/
|
||||
****************************************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC4310203050_PINCONF_H */
|
||||
|
682
arch/arm/src/lpc43xx/chip/lpc43_sgpio.h
Normal file
682
arch/arm/src/lpc43xx/chip/lpc43_sgpio.h
Normal file
@ -0,0 +1,682 @@
|
||||
/****************************************************************************************************
|
||||
* arch/arm/src/lpc43xx/chip/lpc43_sgpio.h
|
||||
*
|
||||
* Copyright (C) 2012 Gregory Nutt. All rights reserved.
|
||||
* Author: Gregory Nutt <gnutt@nuttx.org>
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in
|
||||
* the documentation and/or other materials provided with the
|
||||
* distribution.
|
||||
* 3. Neither the name NuttX nor the names of its contributors may be
|
||||
* used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
||||
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
||||
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
|
||||
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
|
||||
* COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
|
||||
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
||||
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
|
||||
* OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
||||
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
|
||||
* ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
||||
* POSSIBILITY OF SUCH DAMAGE.
|
||||
*
|
||||
****************************************************************************************************/
|
||||
|
||||
#ifndef __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_SGPIO_H
|
||||
#define __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_SGPIO_H
|
||||
|
||||
/****************************************************************************************************
|
||||
* Included Files
|
||||
****************************************************************************************************/
|
||||
|
||||
#include <nuttx/config.h>
|
||||
|
||||
/****************************************************************************************************
|
||||
* Pre-processor Definitions
|
||||
****************************************************************************************************/
|
||||
/* Register Offsets *********************************************************************************/
|
||||
|
||||
#define LPC43_SGPIO_OUT_MUXCFG_OFFSET(n) (0x0000 + ((n) << 2)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG0_OFFSET 0x0000 /* Pin multiplexer configuration register 0 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG1_OFFSET 0x0004 /* Pin multiplexer configuration register 1 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG2_OFFSET 0x0008 /* Pin multiplexer configuration register 2 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG3_OFFSET 0x000c /* Pin multiplexer configuration register 3 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG4_OFFSET 0x0010 /* Pin multiplexer configuration register 4 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG5_OFFSET 0x0014 /* Pin multiplexer configuration register 5 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG6_OFFSET 0x0018 /* Pin multiplexer configuration register 6 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG7_OFFSET 0x001c /* Pin multiplexer configuration register 7 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG8_OFFSET 0x0020 /* Pin multiplexer configuration register 8 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG9_OFFSET 0x0024 /* Pin multiplexer configuration register 9 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG10_OFFSET 0x0028 /* Pin multiplexer configuration register 10 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG11_OFFSET 0x002c /* Pin multiplexer configuration register 11 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG12_OFFSET 0x0030 /* Pin multiplexer configuration register 12 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG13_OFFSET 0x0034 /* Pin multiplexer configuration register 13 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG14_OFFSET 0x0038 /* Pin multiplexer configuration register 14 */
|
||||
#define LPC43_SGPIO_OUT_MUXCFG15_OFFSET 0x003c /* Pin multiplexer configuration register 15 */
|
||||
|
||||
#define LPC43_SGPIO_MUXCFG_OFFSET(n) (0x0040 + ((n) << 2)
|
||||
#define LPC43_SGPIO_MUXCFG0_OFFSET 0x0040 /* SGPIO multiplexer configuration register 0 */
|
||||
#define LPC43_SGPIO_MUXCFG1_OFFSET 0x0044 /* SGPIO multiplexer configuration register 1 */
|
||||
#define LPC43_SGPIO_MUXCFG2_OFFSET 0x0048 /* SGPIO multiplexer configuration register 2 */
|
||||
#define LPC43_SGPIO_MUXCFG3_OFFSET 0x004c /* SGPIO multiplexer configuration register 3 */
|
||||
#define LPC43_SGPIO_MUXCFG4_OFFSET 0x0050 /* SGPIO multiplexer configuration register 4 */
|
||||
#define LPC43_SGPIO_MUXCFG5_OFFSET 0x0054 /* SGPIO multiplexer configuration register 5 */
|
||||
#define LPC43_SGPIO_MUXCFG6_OFFSET 0x0058 /* SGPIO multiplexer configuration register 6 */
|
||||
#define LPC43_SGPIO_MUXCFG7_OFFSET 0x005c /* SGPIO multiplexer configuration register 7 */
|
||||
#define LPC43_SGPIO_MUXCFG8_OFFSET 0x0060 /* SGPIO multiplexer configuration register 8 */
|
||||
#define LPC43_SGPIO_MUXCFG9_OFFSET 0x0064 /* SGPIO multiplexer configuration register 9 */
|
||||
#define LPC43_SGPIO_MUXCFG10_OFFSET 0x0068 /* SGPIO multiplexer configuration register 10 */
|
||||
#define LPC43_SGPIO_MUXCFG11_OFFSET 0x006c /* SGPIO multiplexer configuration register 11 */
|
||||
#define LPC43_SGPIO_MUXCFG12_OFFSET 0x0070 /* SGPIO multiplexer configuration register 12 */
|
||||
#define LPC43_SGPIO_MUXCFG13_OFFSET 0x0074 /* SGPIO multiplexer configuration register 13 */
|
||||
#define LPC43_SGPIO_MUXCFG14_OFFSET 0x0078 /* SGPIO multiplexer configuration register 14 */
|
||||
#define LPC43_SGPIO_MUXCFG15_OFFSET 0x007c /* SGPIO multiplexer configuration register 15 */
|
||||
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG_OFFSET(n) (0x0080 + ((n) << 2)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG0_OFFSET 0x0080 /* Slice multiplexer configuration register 0 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG1_OFFSET 0x0084 /* Slice multiplexer configuration register 1 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG2_OFFSET 0x0088 /* Slice multiplexer configuration register 2 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG3_OFFSET 0x008c /* Slice multiplexer configuration register 3 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG4_OFFSET 0x0090 /* Slice multiplexer configuration register 4 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG5_OFFSET 0x0094 /* Slice multiplexer configuration register 5 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG6_OFFSET 0x0098 /* Slice multiplexer configuration register 6 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG7_OFFSET 0x009c /* Slice multiplexer configuration register 7 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG8_OFFSET 0x00a0 /* Slice multiplexer configuration register 8 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG9_OFFSET 0x00a4 /* Slice multiplexer configuration register 9 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG10_OFFSET 0x00a8 /* Slice multiplexer configuration register 10 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG11_OFFSET 0x00ac /* Slice multiplexer configuration register 11 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG12_OFFSET 0x00b0 /* Slice multiplexer configuration register 12 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG13_OFFSET 0x00b4 /* Slice multiplexer configuration register 13 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG14_OFFSET 0x00b8 /* Slice multiplexer configuration register 14 */
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG15_OFFSET 0x00bc /* Slice multiplexer configuration register 15 */
|
||||
|
||||
#define LPC43_SGPIO_REG_OFFSET(n) (0x00c0 + ((n) << 2)
|
||||
#define LPC43_SGPIO_REG0_OFFSET 0x00c0 /* Slice data register 0 */
|
||||
#define LPC43_SGPIO_REG1_OFFSET 0x00c4 /* Slice data register 1 */
|
||||
#define LPC43_SGPIO_REG2_OFFSET 0x00c8 /* Slice data register 2 */
|
||||
#define LPC43_SGPIO_REG3_OFFSET 0x00cc /* Slice data register 3 */
|
||||
#define LPC43_SGPIO_REG4_OFFSET 0x00d0 /* Slice data register 4 */
|
||||
#define LPC43_SGPIO_REG5_OFFSET 0x00d4 /* Slice data register 5 */
|
||||
#define LPC43_SGPIO_REG6_OFFSET 0x00d8 /* Slice data register 6 */
|
||||
#define LPC43_SGPIO_REG7_OFFSET 0x00dc /* Slice data register 7 */
|
||||
#define LPC43_SGPIO_REG8_OFFSET 0x00e0 /* Slice data register 8 */
|
||||
#define LPC43_SGPIO_REG9_OFFSET 0x00e4 /* Slice data register 9 */
|
||||
#define LPC43_SGPIO_REG10_OFFSET 0x00e8 /* Slice data register 10 */
|
||||
#define LPC43_SGPIO_REG11_OFFSET 0x00ec /* Slice data register 11 */
|
||||
#define LPC43_SGPIO_REG12_OFFSET 0x00f0 /* Slice data register 12 */
|
||||
#define LPC43_SGPIO_REG13_OFFSET 0x00f4 /* Slice data register 13 */
|
||||
#define LPC43_SGPIO_REG14_OFFSET 0x00f8 /* Slice data register 14 */
|
||||
#define LPC43_SGPIO_REG15_OFFSET 0x00fc /* Slice data register 15 */
|
||||
|
||||
#define LPC43_SGPIO_REG_SS_OFFSET(n) (0x0100 + ((n) << 2)
|
||||
#define LPC43_SGPIO_REG_SS0_OFFSET 0x0100 /* Slice data shadow register 0 */
|
||||
#define LPC43_SGPIO_REG_SS1_OFFSET 0x0104 /* Slice data shadow register 1 */
|
||||
#define LPC43_SGPIO_REG_SS2_OFFSET 0x0108 /* Slice data shadow register 2 */
|
||||
#define LPC43_SGPIO_REG_SS3_OFFSET 0x010c /* Slice data shadow register 3 */
|
||||
#define LPC43_SGPIO_REG_SS4_OFFSET 0x0110 /* Slice data shadow register 4 */
|
||||
#define LPC43_SGPIO_REG_SS5_OFFSET 0x0114 /* Slice data shadow register 5 */
|
||||
#define LPC43_SGPIO_REG_SS6_OFFSET 0x0118 /* Slice data shadow register 6 */
|
||||
#define LPC43_SGPIO_REG_SS7_OFFSET 0x011c /* Slice data shadow register 7 */
|
||||
#define LPC43_SGPIO_REG_SS8_OFFSET 0x0120 /* Slice data shadow register 8 */
|
||||
#define LPC43_SGPIO_REG_SS9_OFFSET 0x0124 /* Slice data shadow register 9 */
|
||||
#define LPC43_SGPIO_REG_SS10_OFFSET 0x0128 /* Slice data shadow register 10 */
|
||||
#define LPC43_SGPIO_REG_SS11_OFFSET 0x012c /* Slice data shadow register 11 */
|
||||
#define LPC43_SGPIO_REG_SS12_OFFSET 0x0130 /* Slice data shadow register 12 */
|
||||
#define LPC43_SGPIO_REG_SS13_OFFSET 0x0134 /* Slice data shadow register 13 */
|
||||
#define LPC43_SGPIO_REG_SS14_OFFSET 0x0138 /* Slice data shadow register 14 */
|
||||
#define LPC43_SGPIO_REG_SS15_OFFSET 0x013c /* Slice data shadow register 15 */
|
||||
|
||||
#define LPC43_SGPIO_PRESET_OFFSET(n) (0x0140 + ((n) << 2)
|
||||
#define LPC43_SGPIO_PRESET0_OFFSET 0x0140 /* COUNT0 reload value */
|
||||
#define LPC43_SGPIO_PRESET1_OFFSET 0x0144 /* COUNT1 reload value */
|
||||
#define LPC43_SGPIO_PRESET2_OFFSET 0x0148 /* COUNT2 reload value */
|
||||
#define LPC43_SGPIO_PRESET3_OFFSET 0x014c /* COUNT3 reload value */
|
||||
#define LPC43_SGPIO_PRESET4_OFFSET 0x0150 /* COUNT4 reload value */
|
||||
#define LPC43_SGPIO_PRESET5_OFFSET 0x0154 /* COUNT5 reload value */
|
||||
#define LPC43_SGPIO_PRESET6_OFFSET 0x0158 /* COUNT6 reload value */
|
||||
#define LPC43_SGPIO_PRESET7_OFFSET 0x015c /* COUNT7 reload value */
|
||||
#define LPC43_SGPIO_PRESET8_OFFSET 0x0160 /* COUNT8 reload value */
|
||||
#define LPC43_SGPIO_PRESET9_OFFSET 0x0164 /* COUNT9 reload value */
|
||||
#define LPC43_SGPIO_PRESET10_OFFSET 0x0168 /* COUNT10 reload value */
|
||||
#define LPC43_SGPIO_PRESET11_OFFSET 0x016c /* COUNT11 reload value */
|
||||
#define LPC43_SGPIO_PRESET12_OFFSET 0x0170 /* COUNT12 reload value */
|
||||
#define LPC43_SGPIO_PRESET13_OFFSET 0x0174 /* COUNT13 reload value */
|
||||
#define LPC43_SGPIO_PRESET14_OFFSET 0x0178 /* COUNT14 reload value */
|
||||
#define LPC43_SGPIO_PRESET15_OFFSET 0x017c /* COUNT15 reload value */
|
||||
|
||||
#define LPC43_SGPIO_COUNT_OFFSET(n) (0x0180 + ((n) << 2)
|
||||
#define LPC43_SGPIO_COUNT0_OFFSET 0x0180 /* Down counter 0 */
|
||||
#define LPC43_SGPIO_COUNT1_OFFSET 0x0184 /* Down counter 1 */
|
||||
#define LPC43_SGPIO_COUNT2_OFFSET 0x0188 /* Down counter 2 */
|
||||
#define LPC43_SGPIO_COUNT3_OFFSET 0x018c /* Down counter 3 */
|
||||
#define LPC43_SGPIO_COUNT4_OFFSET 0x0190 /* Down counter 4 */
|
||||
#define LPC43_SGPIO_COUNT5_OFFSET 0x0194 /* Down counter 5 */
|
||||
#define LPC43_SGPIO_COUNT6_OFFSET 0x0198 /* Down counter 6 */
|
||||
#define LPC43_SGPIO_COUNT7_OFFSET 0x019c /* Down counter 7 */
|
||||
#define LPC43_SGPIO_COUNT8_OFFSET 0x01a0 /* Down counter 8 */
|
||||
#define LPC43_SGPIO_COUNT9_OFFSET 0x01a4 /* Down counter 9 */
|
||||
#define LPC43_SGPIO_COUNT10_OFFSET 0x01a8 /* Down counter 10 */
|
||||
#define LPC43_SGPIO_COUNT11_OFFSET 0x01ac /* Down counter 11 */
|
||||
#define LPC43_SGPIO_COUNT12_OFFSET 0x01b0 /* Down counter 12 */
|
||||
#define LPC43_SGPIO_COUNT13_OFFSET 0x01b4 /* Down counter 13 */
|
||||
#define LPC43_SGPIO_COUNT14_OFFSET 0x01b8 /* Down counter 14 */
|
||||
#define LPC43_SGPIO_COUNT15_OFFSET 0x01bc /* Down counter 15 */
|
||||
|
||||
#define LPC43_SGPIO_POS_OFFSET(n) (0x01c0 + ((n) << 2)
|
||||
#define LPC43_SGPIO_POS0_OFFSET 0x01c0 /* Position register 0 */
|
||||
#define LPC43_SGPIO_POS1_OFFSET 0x01c4 /* Position register 1 */
|
||||
#define LPC43_SGPIO_POS2_OFFSET 0x01c8 /* Position register 2 */
|
||||
#define LPC43_SGPIO_POS3_OFFSET 0x01cc /* Position register 3 */
|
||||
#define LPC43_SGPIO_POS4_OFFSET 0x01d0 /* Position register 4 */
|
||||
#define LPC43_SGPIO_POS5_OFFSET 0x01d4 /* Position register 5 */
|
||||
#define LPC43_SGPIO_POS6_OFFSET 0x01d8 /* Position register 6 */
|
||||
#define LPC43_SGPIO_POS7_OFFSET 0x01dc /* Position register 7 */
|
||||
#define LPC43_SGPIO_POS8_OFFSET 0x01e0 /* Position register 8 */
|
||||
#define LPC43_SGPIO_POS9_OFFSET 0x01e4 /* Position register 9 */
|
||||
#define LPC43_SGPIO_POS10_OFFSET 0x01e8 /* Position register 0 */
|
||||
#define LPC43_SGPIO_POS11_OFFSET 0x01ec /* Position register 1 */
|
||||
#define LPC43_SGPIO_POS12_OFFSET 0x01f0 /* Position register 2 */
|
||||
#define LPC43_SGPIO_POS13_OFFSET 0x01f4 /* Position register 3 */
|
||||
#define LPC43_SGPIO_POS14_OFFSET 0x01f8 /* Position register 4 */
|
||||
#define LPC43_SGPIO_POS15_OFFSET 0x01fc /* Position register 5 */
|
||||
|
||||
#define LPC43_SGPIO_MASKA_OFFSET 0x0200 /* Mask for pattern match function of slice A */
|
||||
#define LPC43_SGPIO_MASKH_OFFSET 0x0204 /* Mask for pattern match function of slice H */
|
||||
#define LPC43_SGPIO_MASKI_OFFSET 0x0208 /* Mask for pattern match function of slice I */
|
||||
#define LPC43_SGPIO_MASKP_OFFSET 0x020c /* Mask for pattern match function of slice P */
|
||||
#define LPC43_SGPIO_GPIO_INREG_OFFSET 0x0210 /* GPIO input status register */
|
||||
#define LPC43_SGPIO_GPIO_OUTREG_OFFSET 0x0214 /* GPIO output control register */
|
||||
#define LPC43_SGPIO_GPIO_OENREG_OFFSET 0x0218 /* GPIO OE control register */
|
||||
#define LPC43_SGPIO_CTRL_ENABLE_OFFSET 0x021c /* Enables the slice COUNT counter */
|
||||
#define LPC43_SGPIO_CTRL_DISABLE_OFFSET 0x0220 /* Disables the slice POS counter */
|
||||
|
||||
#define LPC43_SGPIO_INT_OFFSET(n) (0xf00 + ((n) << 5))
|
||||
#define LPC43_SGPIO_CLREN_INTOFFSET 0x0000 /* Interrupt clear mask */
|
||||
#define LPC43_SGPIO_SETEN_INTOFFSET 0x0004 /* Interrupt set mask */
|
||||
#define LPC43_SGPIO_ENABLE_INTOFFSET 0x0008 /* Interrupt enable */
|
||||
#define LPC43_SGPIO_STATUS_INTOFFSET 0x000c /* Interrupt status */
|
||||
#define LPC43_SGPIO_CLRSTAT_INTOFFSET 0x0010 /* Interrupt clear status */
|
||||
#define LPC43_SGPIO_SETSTAT_INTOFFSET 0x0014 /* Interrupt set status */
|
||||
|
||||
#define LPC43_SGPIO_CLREN_OFFSET(n) (LPC43_SGPIO_INT_OFFSET(n)+LPC43_SGPIO_CLREN_INTOFFSET)
|
||||
#define LPC43_SGPIO_SETEN_OFFSET(n) (LPC43_SGPIO_INT_OFFSET(n)+LPC43_SGPIO_SETEN_INTOFFSET)
|
||||
#define LPC43_SGPIO_ENABLE_OFFSET(n) (LPC43_SGPIO_INT_OFFSET(n)+LPC43_SGPIO_ENABLE_INTOFFSET)
|
||||
#define LPC43_SGPIO_STATUS_OFFSET(n) (LPC43_SGPIO_INT_OFFSET(n)+LPC43_SGPIO_STATUS_INTOFFSET)
|
||||
#define LPC43_SGPIO_CLRSTAT_OFFSET(n) (LPC43_SGPIO_INT_OFFSET(n)+LPC43_SGPIO_CLRSTAT_INTOFFSET)
|
||||
#define LPC43_SGPIO_SETSTAT_OFFSET(n) (LPC43_SGPIO_INT_OFFSET(n)+LPC43_SGPIO_SETSTAT_INTOFFSET)
|
||||
|
||||
#define LPC43_SGPIO_CLREN0_OFFSET 0x0f00 /* Shift clock interrupt clear mask */
|
||||
#define LPC43_SGPIO_SETEN0_OFFSET 0x0f04 /* Shift clock interrupt set mask */
|
||||
#define LPC43_SGPIO_ENABLE0_OFFSET 0x0f08 /* Shift clock interrupt enable */
|
||||
#define LPC43_SGPIO_STATUS0_OFFSET 0x0f0c /* Shift clock interrupt status */
|
||||
#define LPC43_SGPIO_CLRSTAT0_OFFSET 0x0f10 /* Shift clock interrupt clear status */
|
||||
#define LPC43_SGPIO_SETSTAT0_OFFSET 0x0f14 /* Shift clock interrupt set status */
|
||||
|
||||
#define LPC43_SGPIO_CLREN1_OFFSET 0x0f20 /* Exchange clock interrupt clear mask */
|
||||
#define LPC43_SGPIO_SETEN1_OFFSET 0x0f24 /* Exchange clock interrupt set mask */
|
||||
#define LPC43_SGPIO_ENABLE1_OFFSET 0x0f28 /* Exchange clock interrupt enable */
|
||||
#define LPC43_SGPIO_STATUS1_OFFSET 0x0f2c /* Exchange clock interrupt status */
|
||||
#define LPC43_SGPIO_CLRSTAT1_OFFSET 0x0f30 /* Exchange clock interrupt clear status */
|
||||
#define LPC43_SGPIO_SETSTAT1_OFFSET 0x0f34 /* Exchange clock interrupt set status */
|
||||
|
||||
#define LPC43_SGPIO_CLREN2_OFFSET 0x0f40 /* Pattern match interrupt clear mask */
|
||||
#define LPC43_SGPIO_SETEN2_OFFSET 0x0f44 /* Pattern match interrupt set mask */
|
||||
#define LPC43_SGPIO_ENABLE2_OFFSET 0x0f48 /* Pattern match interrupt enable */
|
||||
#define LPC43_SGPIO_STATUS2_OFFSET 0x0f4c /* Pattern match interrupt status */
|
||||
#define LPC43_SGPIO_CLRSTAT2_OFFSET 0x0f50 /* Pattern match interrupt clear status */
|
||||
#define LPC43_SGPIO_SETSTAT2_OFFSET 0x0f54 /* Pattern match interrupt set status */
|
||||
|
||||
#define LPC43_SGPIO_CLREN3_OFFSET 0x0f60 /* Input interrupt clear mask */
|
||||
#define LPC43_SGPIO_SETEN3_OFFSET 0x0f64 /* Input bit match interrupt set mask */
|
||||
#define LPC43_SGPIO_ENABLE3_OFFSET 0x0f68 /* Input bit match interrupt enable */
|
||||
#define LPC43_SGPIO_STATUS3_OFFSET 0x0f6c /* Input bit match interrupt status */
|
||||
#define LPC43_SGPIO_CLRSTAT3_OFFSET 0x0f70 /* Input bit match interrupt clear status */
|
||||
#define LPC43_SGPIO_SETSTAT3_OFFSET 0x0f74 /* Input bit match interrupt set status */
|
||||
|
||||
/* Register Addresses *******************************************************************************/
|
||||
|
||||
#define LPC43_SGPIO_OUT_MUXCFG(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG_OFFSET(n))
|
||||
#define LPC43_SGPIO_OUT_MUXCFG0 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG0_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG1 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG1_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG2 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG2_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG3 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG3_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG4 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG4_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG5 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG5_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG6 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG6_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG7 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG7_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG8 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG8_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG9 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG9_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG10 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG10_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG11 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG11_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG12 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG12_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG13 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG13_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG14 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG14_OFFSET)
|
||||
#define LPC43_SGPIO_OUT_MUXCFG15 (LPC43_SGPIO_BASE+LPC43_SGPIO_OUT_MUXCFG15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_MUXCFG(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG_OFFSET(n))
|
||||
#define LPC43_SGPIO_MUXCFG0 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG0_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG1 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG1_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG2 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG2_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG3 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG3_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG4 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG4_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG5 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG5_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG6 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG6_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG7 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG7_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG8 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG8_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG9 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG9_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG10 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG10_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG11 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG11_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG12 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG12_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG13 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG13_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG14 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG14_OFFSET)
|
||||
#define LPC43_SGPIO_MUXCFG15 (LPC43_SGPIO_BASE+LPC43_SGPIO_MUXCFG15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG_OFFSET(n))
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG0 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG0_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG1 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG1_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG2 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG2_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG3 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG3_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG4 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG4_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG5 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG5_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG6 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG6_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG7 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG7_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG8 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG8_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG9 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG9_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG10 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG10_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG11 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG11_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG12 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG12_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG13 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG13_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG14 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG14_OFFSET)
|
||||
#define LPC43_SGPIO_SLICE_MUXCFG15 (LPC43_SGPIO_BASE+LPC43_SGPIO_SLICE_MUXCFG15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_REG(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_OFFSET(n))
|
||||
#define LPC43_SGPIO_REG0 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG0_OFFSET)
|
||||
#define LPC43_SGPIO_REG1 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG1_OFFSET)
|
||||
#define LPC43_SGPIO_REG2 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG2_OFFSET)
|
||||
#define LPC43_SGPIO_REG3 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG3_OFFSET)
|
||||
#define LPC43_SGPIO_REG4 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG4_OFFSET)
|
||||
#define LPC43_SGPIO_REG5 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG5_OFFSET)
|
||||
#define LPC43_SGPIO_REG6 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG6_OFFSET)
|
||||
#define LPC43_SGPIO_REG7 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG7_OFFSET)
|
||||
#define LPC43_SGPIO_REG8 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG8_OFFSET)
|
||||
#define LPC43_SGPIO_REG9 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG9_OFFSET)
|
||||
#define LPC43_SGPIO_REG10 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG10_OFFSET)
|
||||
#define LPC43_SGPIO_REG11 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG11_OFFSET)
|
||||
#define LPC43_SGPIO_REG12 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG12_OFFSET)
|
||||
#define LPC43_SGPIO_REG13 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG13_OFFSET)
|
||||
#define LPC43_SGPIO_REG14 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG14_OFFSET)
|
||||
#define LPC43_SGPIO_REG15 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_REG_SS(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS_OFFSET(n))
|
||||
#define LPC43_SGPIO_REG_SS0 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS0_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS1 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS1_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS2 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS2_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS3 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS3_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS4 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS4_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS5 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS5_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS6 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS6_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS7 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS7_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS8 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS8_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS9 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS9_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS10 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS10_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS11 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS11_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS12 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS12_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS13 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS13_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS14 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS14_OFFSET)
|
||||
#define LPC43_SGPIO_REG_SS15 (LPC43_SGPIO_BASE+LPC43_SGPIO_REG_SS15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_PRESET(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET_OFFSET(n))
|
||||
#define LPC43_SGPIO_PRESET0 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET0_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET1 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET1_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET2 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET2_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET3 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET3_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET4 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET4_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET5 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET5_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET6 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET6_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET7 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET7_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET8 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET8_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET9 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET9_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET10 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET10_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET11 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET11_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET12 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET12_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET13 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET13_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET14 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET14_OFFSET)
|
||||
#define LPC43_SGPIO_PRESET15 (LPC43_SGPIO_BASE+LPC43_SGPIO_PRESET15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_COUNT(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT_OFFSET(n))
|
||||
#define LPC43_SGPIO_COUNT0 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT0_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT1 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT1_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT2 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT2_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT3 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT3_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT4 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT4_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT5 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT5_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT6 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT6_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT7 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT7_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT8 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT8_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT9 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT9_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT10 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT10_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT11 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT11_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT12 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT12_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT13 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT13_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT14 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT14_OFFSET)
|
||||
#define LPC43_SGPIO_COUNT15 (LPC43_SGPIO_BASE+LPC43_SGPIO_COUNT15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_POS(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_POS_OFFSET(n))
|
||||
#define LPC43_SGPIO_POS0 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS0_OFFSET)
|
||||
#define LPC43_SGPIO_POS1 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS1_OFFSET)
|
||||
#define LPC43_SGPIO_POS2 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS2_OFFSET)
|
||||
#define LPC43_SGPIO_POS3 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS3_OFFSET)
|
||||
#define LPC43_SGPIO_POS4 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS4_OFFSET)
|
||||
#define LPC43_SGPIO_POS5 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS5_OFFSET)
|
||||
#define LPC43_SGPIO_POS6 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS6_OFFSET)
|
||||
#define LPC43_SGPIO_POS7 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS7_OFFSET)
|
||||
#define LPC43_SGPIO_POS8 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS8_OFFSET)
|
||||
#define LPC43_SGPIO_POS9 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS9_OFFSET)
|
||||
#define LPC43_SGPIO_POS10 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS10_OFFSET)
|
||||
#define LPC43_SGPIO_POS11 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS11_OFFSET)
|
||||
#define LPC43_SGPIO_POS12 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS12_OFFSET)
|
||||
#define LPC43_SGPIO_POS13 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS13_OFFSET)
|
||||
#define LPC43_SGPIO_POS14 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS14_OFFSET)
|
||||
#define LPC43_SGPIO_POS15 (LPC43_SGPIO_BASE+LPC43_SGPIO_POS15_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_MASKA (LPC43_SGPIO_BASE+LPC43_SGPIO_MASKA_OFFSET)
|
||||
#define LPC43_SGPIO_MASKH (LPC43_SGPIO_BASE+LPC43_SGPIO_MASKH_OFFSET)
|
||||
#define LPC43_SGPIO_MASKI (LPC43_SGPIO_BASE+LPC43_SGPIO_MASKI_OFFSET)
|
||||
#define LPC43_SGPIO_MASKP (LPC43_SGPIO_BASE+LPC43_SGPIO_MASKP_OFFSET)
|
||||
#define LPC43_SGPIO_GPIO_INREG (LPC43_SGPIO_BASE+LPC43_SGPIO_GPIO_INREG_OFFSET)
|
||||
#define LPC43_SGPIO_GPIO_OUTREG (LPC43_SGPIO_BASE+LPC43_SGPIO_GPIO_OUTREG_OFFSET)
|
||||
#define LPC43_SGPIO_GPIO_OENREG (LPC43_SGPIO_BASE+LPC43_SGPIO_GPIO_OENREG_OFFSET)
|
||||
#define LPC43_SGPIO_CTRL_ENABLE (LPC43_SGPIO_BASE+LPC43_SGPIO_CTRL_ENABLE_OFFSET)
|
||||
#define LPC43_SGPIO_CTRL_DISABLE (LPC43_SGPIO_BASE+LPC43_SGPIO_CTRL_DISABLE_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_INT(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_INT_OFFSET(n))
|
||||
#define LPC43_SGPIO_CLREN(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_CLREN_OFFSET(n))
|
||||
#define LPC43_SGPIO_SETEN(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_SETEN_OFFSET(n))
|
||||
#define LPC43_SGPIO_ENABLE(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_ENABLE_OFFSET(n))
|
||||
#define LPC43_SGPIO_STATUS(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_STATUS_OFFSET(n))
|
||||
#define LPC43_SGPIO_CLRSTAT(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_CLRSTAT_OFFSET(n))
|
||||
#define LPC43_SGPIO_SETSTAT(n) (LPC43_SGPIO_BASE+LPC43_SGPIO_SETSTAT_OFFSET(n))
|
||||
|
||||
#define LPC43_SGPIO_CLREN0 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLREN0_OFFSET)
|
||||
#define LPC43_SGPIO_SETEN0 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETEN0_OFFSET)
|
||||
#define LPC43_SGPIO_ENABLE0 (LPC43_SGPIO_BASE+LPC43_SGPIO_ENABLE0_OFFSET)
|
||||
#define LPC43_SGPIO_STATUS0 (LPC43_SGPIO_BASE+LPC43_SGPIO_STATUS0_OFFSET)
|
||||
#define LPC43_SGPIO_CLRSTAT0 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLRSTAT0_OFFSET)
|
||||
#define LPC43_SGPIO_SETSTAT0 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETSTAT0_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_CLREN1 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLREN1_OFFSET)
|
||||
#define LPC43_SGPIO_SETEN1 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETEN1_OFFSET)
|
||||
#define LPC43_SGPIO_ENABLE1 (LPC43_SGPIO_BASE+LPC43_SGPIO_ENABLE1_OFFSET)
|
||||
#define LPC43_SGPIO_STATUS1 (LPC43_SGPIO_BASE+LPC43_SGPIO_STATUS1_OFFSET)
|
||||
#define LPC43_SGPIO_CLRSTAT1 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLRSTAT1_OFFSET)
|
||||
#define LPC43_SGPIO_SETSTAT1 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETSTAT1_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_CLREN2 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLREN2_OFFSET)
|
||||
#define LPC43_SGPIO_SETEN2 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETEN2_OFFSET)
|
||||
#define LPC43_SGPIO_ENABLE2 (LPC43_SGPIO_BASE+LPC43_SGPIO_ENABLE2_OFFSET)
|
||||
#define LPC43_SGPIO_STATUS2 (LPC43_SGPIO_BASE+LPC43_SGPIO_STATUS2_OFFSET)
|
||||
#define LPC43_SGPIO_CLRSTAT2 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLRSTAT2_OFFSET)
|
||||
#define LPC43_SGPIO_SETSTAT2 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETSTAT2_OFFSET)
|
||||
|
||||
#define LPC43_SGPIO_CLREN3 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLREN3_OFFSET)
|
||||
#define LPC43_SGPIO_SETEN3 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETEN3_OFFSET)
|
||||
#define LPC43_SGPIO_ENABLE3 (LPC43_SGPIO_BASE+LPC43_SGPIO_ENABLE3_OFFSET)
|
||||
#define LPC43_SGPIO_STATUS3 (LPC43_SGPIO_BASE+LPC43_SGPIO_STATUS3_OFFSET)
|
||||
#define LPC43_SGPIO_CLRSTAT3 (LPC43_SGPIO_BASE+LPC43_SGPIO_CLRSTAT3_OFFSET)
|
||||
#define LPC43_SGPIO_SETSTAT3 (LPC43_SGPIO_BASE+LPC43_SGPIO_SETSTAT3_OFFSET)
|
||||
|
||||
/* Register Bit Definitions *************************************************************************/
|
||||
|
||||
/* Pin multiplexer configuration registers */
|
||||
|
||||
#define SGPIO_OUT_MUXCFG_OUTCFG_SHIFT (0) /* Bits 0-3: P_OUT_CFG Output control SGPIOn */
|
||||
#define SGPIO_OUT_MUXCFG_OUTCFG_MASK (15 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT)
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM1 (0 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm1 (1-bit mode) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_ DOUTM2A (1 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm2a (2-bit mode 2a) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM2B (2 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm2b (2-bit mode 2b) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM2C (3 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm2c (2-bit mode 2c) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_GPIOOUT (4 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* gpio_out (level set by GPIO_OUTREG) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM4A (5 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm4a (4-bit mode 4a) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM4B (6 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm4b (4-bit mode 4b) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM4C (7 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm4c (4-bit mode 4c) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_CLKOUT (8 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* clk_out */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM8A (9 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm8a (8-bit mode 8a) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM8B (10 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm8b (8-bit mode 8b) */
|
||||
# define SGPIO_OUT_MUXCFG_OUTCFG_DOUTM8C (11 << SGPIO_OUT_MUXCFG_OUTCFG_SHIFT) /* dout_doutm8c (8-bit mode 8c) */
|
||||
#define SGPIO_OUT_MUXCFG_OECFG_SHIFT (4) /* Bits 4-6: P_OE_CFG Output enable source */
|
||||
#define SGPIO_OUT_MUXCFG_OECFG_MASK (7 << SGPIO_OUT_MUXCFG_OECFG_SHIFT)
|
||||
# define SGPIO_OUT_MUXCFG_OECFG_GPIOOE (0 << SGPIO_OUT_MUXCFG_OECFG_SHIFT) /* gpio_oe (state set by GPIO_OEREG) */
|
||||
# define SGPIO_OUT_MUXCFG_OECFG_OEM1 (4 << SGPIO_OUT_MUXCFG_OECFG_SHIFT) /* dout_oem1 (1-bit mode) */
|
||||
# define SGPIO_OUT_MUXCFG_OECFG_OEM2 (5 << SGPIO_OUT_MUXCFG_OECFG_SHIFT) /* dout_oem2 (2-bit mode) */
|
||||
# define SGPIO_OUT_MUXCFG_OECFG_OEM4 (6 << SGPIO_OUT_MUXCFG_OECFG_SHIFT) /* dout_oem4 (4-bit mode) */
|
||||
# define SGPIO_OUT_MUXCFG_OECFG_OEM8 (7 << SGPIO_OUT_MUXCFG_OECFG_SHIFT) /* dout_oem8 (8-bit mode) */
|
||||
/* Bits 7-31: Reserved */
|
||||
/* SGPIO multiplexer configuration registers */
|
||||
|
||||
#define SGPIO_MUXCFG_EXTCLK (1 << 9) /* Bit 9: Select clock signal */
|
||||
#define SGPIO_MUXCFG_CS_PMODE_SHIFT (1) /* Bits 1-2: Select source clock pin */
|
||||
#define SGPIO_MUXCFG_CS_PMODE_MASK (3 << SGPIO_MUXCFG_CS_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_PMODE_SGPIO8 (0 << SGPIO_MUXCFG_CS_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_PMODE_SGPIO9 (1 << SGPIO_MUXCFG_CS_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_PMODE_SGPIO10 (2 << SGPIO_MUXCFG_CS_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_PMODE_SGPIO11 (3 << SGPIO_MUXCFG_CS_PMODE_SHIFT)
|
||||
#define SGPIO_MUXCFG_CS_SMODE_SHIFT (3) /* Bits 3-4: CLK_SOURCE_SLICE_MODE Select clock source slice */
|
||||
#define SGPIO_MUXCFG_CS_SMODE_MASK (3 << SGPIO_MUXCFG_CS_SMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_SMODE_SLICED (0 << SGPIO_MUXCFG_CS_SMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_SMODE_SLICEH (1 << SGPIO_MUXCFG_CS_SMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_SMODE_SLICEO (2 << SGPIO_MUXCFG_CS_SMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_CS_SMODE_SLICEP (3 << SGPIO_MUXCFG_CS_SMODE_SHIFT)
|
||||
#define SGPIO_MUXCFG_QUAL_MODE_SHIFT (5) /* Bits 5-6: Select qualifier mode */
|
||||
#define SGPIO_MUXCFG_QUAL_MODE_MASK (3 << SGPIO_MUXCFG_QUAL_MODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_QUAL_MODE_ENABLE (0 << SGPIO_MUXCFG_QUAL_MODE_SHIFT) /* Enable */
|
||||
# define SGPIO_MUXCFG_QUAL_MODE_DISABLE (1 << SGPIO_MUXCFG_QUAL_MODE_SHIFT) /* Disable */
|
||||
# define SGPIO_MUXCFG_QUAL_MODE_SLICE (2 << SGPIO_MUXCFG_QUAL_MODE_SHIFT) /* Slice */
|
||||
# define SGPIO_MUXCFG_QUAL_MODE_SGPIO (3 << SGPIO_MUXCFG_QUAL_MODE_SHIFT) /* External SGPIO pin (8, 9, 10, or 11) */
|
||||
#define SGPIO_MUXCFG_QUAL_PMODE_SHIFT (7) /* Bits 7-8: Select qualifier pin */
|
||||
#define SGPIO_MUXCFG_QUAL_PMODE_MASK (3 << SGPIO_MUXCFG_QUAL_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_QUAL_PMODE_SGPIO8 (0 << SGPIO_MUXCFG_QUAL_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_QUAL_PMODE_SGPIO9 (1 << SGPIO_MUXCFG_QUAL_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_QUAL_PMODE_SGPIO10 (2 << SGPIO_MUXCFG_QUAL_PMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_QUAL_PMODE_SGPIO11 (3 << SGPIO_MUXCFG_QUAL_PMODE_SHIFT)
|
||||
#define SGPIO_MUXCFG_QUAL_SMODE_SHIFT (9) /* Bits 9-10: Select qualifier slice */
|
||||
#define SGPIO_MUXCFG_QUAL_SMODE_MASK (3 << SGPIO_MUXCFG_QUAL_SMODE_SHIFT)
|
||||
# define SGPIO_MUXCFG_QUAL_SMODE_SLICEA (0 << SGPIO_MUXCFG_QUAL_SMODE_SHIFT) /* Slice A, but for slice A slice D is used */
|
||||
# define SGPIO_MUXCFG_QUAL_SMODE_SLICEH (1 << SGPIO_MUXCFG_QUAL_SMODE_SHIFT) /* Slice H, but for slice H slice O is used */
|
||||
# define SGPIO_MUXCFG_QUAL_SMODE_SLICEI (2 << SGPIO_MUXCFG_QUAL_SMODE_SHIFT) /* Slice I, but for slice I slice D is used */
|
||||
# define SGPIO_MUXCFG_QUAL_SMODE_SLICEP (3 << SGPIO_MUXCFG_QUAL_SMODE_SHIFT) /* Slice P, but for slice P slice O is used */
|
||||
#define SGPIO_MUXCFG_CONCAT (1 << 11) /* Bit 11: Enable concatenation */
|
||||
#define SGPIO_MUXCFG_CONCAT_ORDER_SHIFT (12) /* Bits 12-13: CONCAT_ORDER Select concatenation order */
|
||||
#define SGPIO_MUXCFG_CONCAT_ORDER_MASK (3 << SGPIO_MUXCFG_CONCAT_ORDER_SHIFT)
|
||||
# define SGPIO_MUXCFG_CONCAT_ORDER_SELT (0 << SGPIO_MUXCFG_CONCAT_ORDER_SHIFT) /* Self-loop */
|
||||
# define SGPIO_MUXCFG_CONCAT_ORDER_S2 (1 << SGPIO_MUXCFG_CONCAT_ORDER_SHIFT) /* 2 slices */
|
||||
# define SGPIO_MUXCFG_CONCAT_ORDER_S4 (2 << SGPIO_MUXCFG_CONCAT_ORDER_SHIFT) /* 4 slices */
|
||||
# define SGPIO_MUXCFG_CONCAT_ORDER_S8 (3 << SGPIO_MUXCFG_CONCAT_ORDER_SHIFT) /* 8 slices */
|
||||
/* Bits 14-31: Reserved */
|
||||
/* Slice multiplexer configuration register 0 */
|
||||
|
||||
#define SGPIO_SLICE_MUXCFG_MATCH (1 << 0) /* Bit 0: Match mode */
|
||||
#define SGPIO_SLICE_MUXCFG_CAPTURE (1 << 1) /* Bit 1: Capture clock mode */
|
||||
#define SGPIO_SLICE_MUXCFG_CLKGEN (1 << 2) /* Bit 2: Clock generation mode */
|
||||
#define SGPIO_SLICE_MUXCFG_INTOUTCLK (1 << 3) /* Bit 3: Invert output clock */
|
||||
#define SGPIO_SLICE_MUXCFG_CAPMODE_SHIFT (4) /* Bits 4-5: Condition for input bit match interrupt */
|
||||
#define SGPIO_SLICE_MUXCFG_CAPMODE_MASK (3 << SGPIO_SLICE_MUXCFG_CAPMODE_SHIFT)
|
||||
# define SGPIO_SLICE_MUXCFG_CAPMODE_RISING (0 << SGPIO_SLICE_MUXCFG_CAPMODE_SHIFT) /* Detect rising edge */
|
||||
# define SGPIO_SLICE_MUXCFG_CAPMODE_FALLING (1 << SGPIO_SLICE_MUXCFG_CAPMODE_SHIFT) /* Detect falling edge */
|
||||
# define SGPIO_SLICE_MUXCFG_CAPMODE_LOW (2 << SGPIO_SLICE_MUXCFG_CAPMODE_SHIFT) /* Detect LOW level */
|
||||
# define SGPIO_SLICE_MUXCFG_CAPMODE_HIGH (3 << SGPIO_SLICE_MUXCFG_CAPMODE_SHIFT) /* Detect HIGH level */
|
||||
#define SGPIO_SLICE_MUXCFG_PARMODE_SHIFT (6) /* Bits 6-7: Parallel mode */
|
||||
#define SGPIO_SLICE_MUXCFG_PARMODE_MASK (3 << SGPIO_SLICE_MUXCFG_PARMODE_SHIFT)
|
||||
# define SGPIO_SLICE_MUXCFG_PARMODE_SHIFT1 (0 << SGPIO_SLICE_MUXCFG_PARMODE_SHIFT) /* Shift 1 bit per clock */
|
||||
# define SGPIO_SLICE_MUXCFG_PARMODE_SHIFT2 (1 << SGPIO_SLICE_MUXCFG_PARMODE_SHIFT) /* Shift 2 bits per clock */
|
||||
# define SGPIO_SLICE_MUXCFG_PARMODE_SHIFT4 (2 << SGPIO_SLICE_MUXCFG_PARMODE_SHIFT) /* Shift 4 bits per clock */
|
||||
# define SGPIO_SLICE_MUXCFG_PARMODE_SHIFT8 (3 << SGPIO_SLICE_MUXCFG_PARMODE_SHIFT) /* Shift 1 byte per clock */
|
||||
#define SGPIO_SLICE_MUXCFG_INVQUAL (1 << 8) /* Bit 8: Inversion qualifier */
|
||||
/* Bits 9-31: Reserved */
|
||||
/* Slice data registers (32-bit data) */
|
||||
/* Slice data shadow registers (32-bit data) */
|
||||
|
||||
/* COUNTn reload value (32-bit data) */
|
||||
|
||||
#define SGPIO_PRESET_MASK (0xfff) /* Bits 0-11: Counter reload value */
|
||||
/* Bits 12-31: Reserved */
|
||||
/* Down counter registers */
|
||||
|
||||
#define SGPIO_COUNT_MASK (0xfff) /* Bits 0-11: Down counter */
|
||||
/* Bits 12-31: Reserved */
|
||||
/* Position registers */
|
||||
|
||||
#define SGPIO_POS_POS_SHIFT (0) /* Bits 0-7: Each time COUNT reaches zero POS counts down */
|
||||
#define SGPIO_POS_POS_MASK (0xffff << SGPIO_POS_POS_SHIFT)
|
||||
#define SGPIO_POS_RESET_SHIFT (8) /* Bits 8-15: Reload value for POS after POS reaches zero */
|
||||
#define SGPIO_POS_RESET_MASK (0xffff << SGPIO_POS_RESET_SHIFT)
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Mask for pattern match function of slice A (32-bit bit mask) */
|
||||
/* Mask for pattern match function of slice H (32-bit bit mask) */
|
||||
/* Mask for pattern match function of slice I (32-bit bit mask) */
|
||||
/* Mask for pattern match function of slice P (32-bit bit mask) */
|
||||
|
||||
/* Common bit mask that can be used in all interrupt registers */
|
||||
|
||||
#define SGPIO_SLICE(n) (1 << (n)) /* Bits 0-15: Bit n corresponids to slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* GPIO input status register */
|
||||
|
||||
#define SGPIO_GPIO_INREG(n) (1 << (n)) /* Bits 0-15: Bit i reflects the input state of SGPIO pin */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* GPIO output control register */
|
||||
|
||||
#define SGPIO_GPIO_OUTREG(n) (1 << (n)) /* Bits 0-15: Bit i sets the output of SGPIO pin i */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* GPIO output enable register */
|
||||
|
||||
#define SGPIO_GPIO_OENREG(n) (1 << (n)) /* Bits 0-15: Bit i selects the output enable state of SGPIO pin i */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Slice count enable register */
|
||||
|
||||
#define SGPIO_CTRL_ENABLE(n) (1 << (n)) /* Bits 0-15: Bit n controls slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Slice count disable register */
|
||||
|
||||
#define SGPIO_CTRL_DISABLE(n) (1 << (n)) /* Bits 0-15: Bit n controls slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Shift clock interrupt clear mask */
|
||||
|
||||
#define SGPIO_CLREN0(n) (1 << (n)) /* Bits 0-15: Bit n shift clock interrupt clear mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Shift clock interrupt set mask */
|
||||
|
||||
#define SGPIO_SETEN0(n) (1 << (n)) /* Bits 0-15: Bit n shift clock interrupt clear mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Shift clock interrupt enable */
|
||||
|
||||
#define SGPIO_ENABLE0(n) (1 << (n)) /* Bits 0-15: Bit n shift clock interrupt enable of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Shift clock interrupt status */
|
||||
|
||||
#define SGPIO_STATUS0(n) (1 << (n)) /* Bits 0-15: Bit n shift clock interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Shift clock interrupt clear status */
|
||||
|
||||
#define SGPIO_CLRSTAT0(n) (1 << (n)) /* Bits 0-15: Bit n shift clears interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Shift clock interrupt set status */
|
||||
|
||||
#define SGPIO_SETSTAT0(n) (1 << (n)) /* Bits 0-15: Bit n shift sets interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Exchange clock interrupt clear mask */
|
||||
|
||||
#define SGPIO_CLREN1(n) (1 << (n)) /* Bits 0-15: Bit n clears exchange clock interrupt mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Exchange clock interrupt set mask */
|
||||
|
||||
#define SGPIO_SETEN1(n) (1 << (n)) /* Bits 0-15: Bit n sets exchange clock interrupt mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Exchange clock interrupt enable */
|
||||
|
||||
#define SGPIO_ENABLE1(n) (1 << (n)) /* Bits 0-15: Bit n enables exchange clock interrupt of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Exchange clock interrupt status */
|
||||
|
||||
#define SGPIO_STATUS1(n) (1 << (n)) /* Bits 0-15: Bit n status of exchange clock interrupt of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Exchange clock interrupt clear status */
|
||||
|
||||
#define SGPIO_CLRSTAT1(n) (1 << (n)) /* Bits 0-15: Bit n clears exchange clock interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Exchange clock interrupt set status */
|
||||
|
||||
#define SGPIO_SETSTAT1(n) (1 << (n)) /* Bits 0-15: Bit n sets exchange clock interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Pattern match interrupt clear mask */
|
||||
|
||||
#define SGPIO_CLREN2(n) (1 << (n)) /* Bits 0-15: Bit n clears match interrupt mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Pattern match interrupt set mask */
|
||||
|
||||
#define SGPIO_SETEN2(n) (1 << (n)) /* Bits 0-15: Bit n sets match interrupt mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Pattern match interrupt enable */
|
||||
|
||||
#define SGPIO_ENABLE2(n) (1 << (n)) /* Bits 0-15: Bit n enables match interrupt of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Pattern match interrupt status */
|
||||
|
||||
#define SGPIO_STATUS2(n) (1 << (n)) /* Bits 0-15: Bit n is match interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Pattern match interrupt clear status */
|
||||
|
||||
#define SGPIO_CLRSTAT2(n) (1 << (n)) /* Bits 0-15: Bit n sets match interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Pattern match interrupt set status */
|
||||
|
||||
#define SGPIO_SETSTAT2(n) (1 << (n)) /* Bits 0-15: Bit n sets match interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Input interrupt clear mask */
|
||||
|
||||
#define SGPIO_CLREN3(n) (1 << (n)) /* Bits 0-15: Bit n clears input interrupt mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Input bit match interrupt set mask */
|
||||
|
||||
#define SGPIO_SETEN3(n) (1 << (n)) /* Bits 0-15: Bit n sets input interrupt mask of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Input bit match interrupt enable */
|
||||
|
||||
#define SGPIO_ENABLE3(n) (1 << (n)) /* Bits 0-15: Bit n enables input interrupt of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Input bit match interrupt status */
|
||||
|
||||
#define SGPIO_STATUS3(n) (1 << (n)) /* Bits 0-15: Bit n is input interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Input bit match interrupt clear status */
|
||||
|
||||
#define SGPIO_CLRSTAT3(n) (1 << (n)) /* Bits 0-15: Bit n clears input interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
/* Input bit match interrupt set status */
|
||||
|
||||
#define SGPIO_SETSTAT3(n) (1 << (n)) /* Bits 0-15: Bit n sets match interrupt status of slice n */
|
||||
/* Bits 16-31: Reserved */
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Types
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Data
|
||||
****************************************************************************************************/
|
||||
|
||||
/****************************************************************************************************
|
||||
* Public Functions
|
||||
****************************************************************************************************/
|
||||
|
||||
#endif /* __ARCH_ARM_SRC_LPC43XX_CHIP_LPC43_SGPIO_H */
|
Loading…
Reference in New Issue
Block a user