Add resource.h and fixed frequently cloned typo

git-svn-id: svn://svn.code.sf.net/p/nuttx/code/trunk@3642 42af7a65-404d-4744-a932-0658087f49c3

configs/README.txt

@@ -261,8 +261,8 @@ defconfig -- This is a configuration file similar to the Linux
 		  regions of memory to allocate from, this specifies the
 		  number of memory regions that the memory manager must
 		  handle and enables the API mm_addregion(start, end);
-		CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-		  or TICKS_PER_MSEC=10.  This setting may be defined to
+		CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+		  or MSEC_PER_TICK=10.  This setting may be defined to
 		  inform NuttX that the processor hardware is providing
 		  system timer interrupts at some interrupt interval other
 		  than 10 msec.

configs/avr32dev1/nsh/defconfig

@@ -228,8 +228,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/avr32dev1/ostest/defconfig

@@ -228,8 +228,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/httpd/defconfig

@@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/nettest/defconfig

@@ -147,8 +147,8 @@ CONFIG_NET_C5471_BASET10=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/nsh/defconfig

@@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/c5471evm/ostest/defconfig

@@ -147,8 +147,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/demo9s12ne64/ostest/defconfig

@@ -207,8 +207,8 @@ CONFIG_PASS1_OBJECT=
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/hidkbd/defconfig

@@ -246,8 +246,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/nsh/defconfig

@@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/ostest/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/detron/wlan/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/nsh/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/ostest/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/pgnsh/defconfig

@@ -221,8 +221,8 @@ CONFIG_PASS1_OBJECT=locked.r
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/usbserial/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ea3131/usbstorage/defconfig

@@ -213,8 +213,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/httpd/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/nettest/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/nsh/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/nxflat/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/ostest/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/eagle100/thttpd/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200kitg/ostest/defconfig

@@ -181,8 +181,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/dhcpd/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/httpd/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/nettest/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/nsh/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/ostest/defconfig

@@ -184,8 +184,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ez80f910200zco/poll/defconfig

@@ -186,8 +186,8 @@ CONFIG_HAVE_LIBM=n
 #   time console output
 # CONFIG_HAVE_GETPUTC - architecture supports low-level, boot
 #   time console input
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s6965-ek/nsh/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s6965-ek/nx/defconfig

@@ -234,8 +234,8 @@ CONFIG_SPI_CMDDATA=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s6965-ek/ostest/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s8962-ek/nsh/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s8962-ek/nx/defconfig

@@ -234,8 +234,8 @@ CONFIG_SPI_CMDDATA=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lm3s8962-ek/ostest/defconfig

@@ -229,8 +229,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/dhcpd/defconfig

@@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/nsh/defconfig

@@ -255,8 +255,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/nx/defconfig

@@ -254,8 +254,8 @@ CONFIG_SPI_CMDDATA=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/ostest/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/thttpd/defconfig

@@ -252,8 +252,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/lpcxpresso-lpc1768/usbstorage/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/m68332evb/defconfig

@@ -117,8 +117,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mbed/hidkbd/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mbed/nsh/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/nsh/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/ostest/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/usbserial/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mcu123-lpc214x/usbstorage/defconfig

@@ -151,8 +151,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/mx1ads/ostest/defconfig

@@ -167,8 +167,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ne64badge/ostest/defconfig

@@ -218,8 +218,8 @@ CONFIG_PASS1_OBJECT=
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/nettest/defconfig

@@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/nsh/defconfig

@@ -154,8 +154,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/ostest/defconfig

@@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/poll/defconfig

@@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/thttpd/defconfig

@@ -159,8 +159,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/udp/defconfig

@@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/ntosd-dm320/uip/defconfig

@@ -155,8 +155,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/nucleus2g/nsh/defconfig

@@ -245,8 +245,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/nucleus2g/ostest/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/nucleus2g/usbserial/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/nucleus2g/usbstorage/defconfig

@@ -242,8 +242,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/hidkbd/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/nettest/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/nsh/defconfig

@@ -249,8 +249,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/nx/defconfig

@@ -248,8 +248,8 @@ CONFIG_SPI_CMDDATA=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/ostest/defconfig

@@ -243,8 +243,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/slip-httpd/defconfig

@@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/thttpd/defconfig

@@ -246,8 +246,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/usbserial/defconfig

@@ -243,8 +243,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/usbstorage/defconfig

@@ -243,8 +243,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc1766stk/wlan/defconfig

@@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc2378/nsh/defconfig

@@ -172,8 +172,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-lpc2378/ostest/defconfig

@@ -172,8 +172,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-strp711/nettest/defconfig

@@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-strp711/nsh/defconfig

@@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/olimex-strp711/ostest/defconfig

@@ -218,8 +218,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/pcblogic-pic32mx/ostest/defconfig

@@ -217,8 +217,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/pjrc-8051/defconfig

@@ -115,8 +115,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/qemu-i486/nsh/defconfig

@@ -185,7 +185,7 @@ CONFIG_UART3_2STOP=0
 #   memory manager must handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot time console
 #   output.
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz or TICKS_PER_MSEC=10.
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz or MSEC_PER_TICK=10.
 #   This setting may be defined to inform NuttX that the processor hardware is
 #   providing system timer interrupts at some interrupt interval other than 10
 #   msec.

configs/qemu-i486/ostest/defconfig

@@ -101,7 +101,7 @@ CONFIG_ARCH_DMA=n
 #   memory manager must handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot time console
 #   output.
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz or TICKS_PER_MSEC=10.
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz or MSEC_PER_TICK=10.
 #   This setting may be defined to inform NuttX that the processor hardware is
 #   providing system timer interrupts at some interrupt interval other than 10
 #   msec.

configs/sam3u-ek/knsh/defconfig

@@ -233,8 +233,8 @@ CONFIG_PASS1_OBJECT=
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sam3u-ek/nsh/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sam3u-ek/nx/defconfig

@@ -215,8 +215,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sam3u-ek/ostest/defconfig

@@ -216,8 +216,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/mount/defconfig

@@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/nettest/defconfig

@@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/nsh/defconfig

@@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/nx/defconfig

@@ -71,8 +71,8 @@ CONFIG_SIM_FBBPP=8
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/nx/defconfig-x11

@@ -71,8 +71,8 @@ CONFIG_SIM_FBBPP=32
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/nxffs/defconfig

@@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/ostest/defconfig

@@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/sim/pashello/defconfig

@@ -64,8 +64,8 @@ CONFIG_ARCH_BOARD_SIM=y
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/skp16c26/ostest/defconfig

@@ -162,8 +162,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/stm3210e-eval/RIDE/defconfig

@@ -238,8 +238,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/stm3210e-eval/nsh/defconfig

@@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/stm3210e-eval/ostest/defconfig

@@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/stm3210e-eval/usbserial/defconfig

@@ -250,8 +250,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/stm3210e-eval/usbstorage/defconfig

@@ -248,8 +248,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.

configs/us7032evb1/nsh/defconfig

@@ -166,8 +166,8 @@ CONFIG_HAVE_LIBM=n
 #   handle and enables the API mm_addregion(start, end);
 # CONFIG_ARCH_LOWPUTC - architecture supports low-level, boot
 #   time console output
-# CONFIG_TICKS_PER_MSEC - The default system timer is 100Hz
-#   or TICKS_PER_MSEC=10.  This setting may be defined to
+# CONFIG_MSEC_PER_TICK - The default system timer is 100Hz
+#   or MSEC_PER_TICK=10.  This setting may be defined to
 #   inform NuttX that the processor hardware is providing
 #   system timer interrupts at some interrupt interval other
 #   than 10 msec.