Basic amg88xx sensor handling (open, close, read, ioctl).
No interrupts supported. I intend to add support for this feature when I
gain more know-how on nuttx/posix.
reason:
BOARDIOC_SPINLOCK can support the combined semantics
of disabling interrupts (irq), trylock, and spinlock.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Make this_cpu is arch independent and up_cpu_index do that.
In AMP mode, up_cpu_index() may return the index of the physical core.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
Copied spi flash files from risc-v
Removed old spiflash from make.defs
KConfig modifications for common spiflash
Added new spiflash entry to make.defs
S2 Board config update
Modifications working on S2. Need fix on ROM function
Board fixes
Deleted old spiflash files
Fixes for smartfs operation
Set new HAL version
Fixed wrong change on S3
Some domains have a lot of IPv6 addresses. Because of that, it is
not possible to get the IPv4 address with getaddrinfo.
This change separate IPv4 and IPv6 cache size limit to enable to
get both IP addresses.
This commit ensures that RTC data is properly allocated in the RTC
segment in the linker. This fixes the reported problem about using
the legacy bootloader and RTC.
After the number of threads exceeds the array size, it will not be displayed.
Any number of threads can be displayed using dynamic adaptation
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
Currently concerns only arm.
tools/ci/testlist/msys2.dat:
At the moment I only added the board nucleo-l152re:nsh
.github/workflows/build.yml:
Enabled cmake for msys2
Prior to this commit, i2c and at24 may be used uninitialized on line
113, 117, 129, and 143 when gd32_at24_wr_test() is called the second
time because these two variables are not static. I don't think making
them static is the correct fix because i2c is released at the end of
this function. Fixed by removing the `if (!initialized)` condition
surrounding the initialization of i2c and at24, making them initialized
at every call to this function.
Signed-off-by: Mingjie Shen <shen497@purdue.edu>
Description:
Example to interact with KEY button and user external button connected to PA1.
For KEY button pull-up resistor is active, board schematic does not show any pull-up or pull-down resistor.
Results: Example working as expected.
BlackPill PWM example
Description:
PWM example using PB0 - Timer3 - Channel 3
Create default configuration for the example.
Controlling_RGB_LED
Description: Controlling a RGB LED on NuttX for Black Pill board [STM32F411]
Note: Example currently not working as expected.
After changing sp, following functions calling will result
in unpredictable behavior in case of jumping
Signed-off-by: wanggang26 <wanggang26@xiaomi.com>
boards/xtensa/esp32s3/esp32s3-devkit|esp32s3-korvo-2/configs/sdmmc/defconfig: defconfig for sdmmc support
Add description for sdmmc support on esp32s3 in the board specific documentation.
Add defconfig for esp32s3-devkit with external adapter and emmc module.
Add defconfig for esp32s3-korvo-2 with SD slot enabled.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
./build.sh sim:usbdev -j12
sudo gdb nuttx/nuttx -ex "source nuttx/tools/gdb/__init__.py"
below command to create mbim NIC on host
nsh> conn 3
NuttX's MBIM device implementation adds an additional MBIM network
card to the NuttX system, which can debug the data communication with
the host, but this network card is unnecessary and needs to be removed
when the business actually uses this driver, And the cdcncm_receive
method needs to be re-implemented.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Update internal reference to get the most updated Espressif's
libraries. Those libraries are based on branch `release/v5.1` of
the ESP-IDF and include `v5.1.4` version of it.
1. increase CDCECM_MXDESCLEN to avoid memory overrun when sending
configuration description(mkcfmdesc) information
2. correct the request structure used in the notify phase
3. disable unused configuration options
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
arch/xtensa/src/esp32s3/hardware/esp32s3_sdmmc.h|esp32s3_soc.h,
boards/xtensa/esp32s3/common/include/esp32s3_board_sdmmc.h,
boards/xtensa/esp32s3/common/src/Make.defs|esp32s3_board_sdmmc.c,
boards/xtensa/esp32s3/esp32s3-devkit/src/esp32s3_bringup.c: add SD/mmc driver
Support 1-bit bus width and 4-bit bus width. Support eMMC high speed SDR mode.
Support transfer data with DMA. Support SD clock frequency up to 40MHZ.
Signed-off-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
Reviewed-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Reviewed-by: Jacky Cao <Jacky.Cao@sony.com>
Tested-by: Yinzhe Wu <Yinzhe.Wu@sony.com>
(1) Keep the `.init_array` and `.ctors` symbols and sort them according to their initialization priority.
(2) Exclude symbols ending with crtend.* and crtbegin.* to support c++
application.if we not exclude crtend.* crtbegin.* frame_dummy will be
added when enable any c++ application with global variables, this symbol
execution is problematic, removing it does not affect the application.
Signed-off-by: cuiziwei <cuiziwei@xiaomi.com>
This reverts both 2afdcfb6a6 and 0a0af89de9 to restore the 128K kflash
design as the implementation depends on that to work, checked with:
```
$ qemu-system-arm -M lm3s6965evb -nographic -device \
loader,file=nuttx.bin,addr=0x0 -device \
loader,file=nuttx_user.bin,addr=0x2000
```
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This renames a few RV32 configs to follow the convention that names w/o
numbers are for RV32, so that to be in line with majority RV32 configs.
As a result, we have: `nsh` vs `nsh64`, `knsh` vs `knsh64`, `pnsh`
vs `pnsh64`,`flats` vs `flats64`, `nsbi` vs `nsbi64`, `libcxx` vs
`libcxx64` etc. This helps us pick the right config name w/o checking
file contents.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adjusts memory.ld to unblock CI issue: `nuttx_user.elf
section '.text' will not fit in region 'uflash'`
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
Most developers start learning Nuttx from sim/nsh, but the login experience is very bad,
they don't know where to get the username and password, this commit will remove the
limitation of sim/nsh login, and add sim/login configuration to ensure the feature of
NSH_CONSOLE_LOGIN is verified.
Signed-off-by: chao an <anchao@lixiang.com>
- New defconfig for nsh CM4 and CM7
- New linker script for cm4
- Update linker script to include shared memory and condition for flash size
- Update Make and CMake file to compile according to core
- Added UART7 pin by default for CM4 serial output
- Changed userled configuration to fix error
Signed-off-by: Nonpawit Ekburanawat <nonpawit.ek@gmail.com>
This PR adds a new Build Config `rv-virt:leds64_rust` that builds the Rust App `leds_rust` for QEMU RISC-V 64-bit. The build requires the [Rust Target `riscv64gc-unknown-none-elf`](https://github.com/apache/nuttx/pull/12858):
```bash
rustup target add riscv64gc-unknown-none-elf
```
New Files:
`boards/risc-v/qemu-rv/rv-virt/configs/leds64_rust/defconfig`: Add new Build Config `rv-virt:leds64_rust`
Updated Docs:
`applications/examples/leds_rust/index.rst`: Add `leds_rust` example app
`platforms/risc-v/qemu-rv/boards/rv-virt/index.rst`: Add `rv-virt:leds64_rust` config
This revises PROTECTED build for qemu-rv mainly to avoid hard-coded
addresses in linker scripts. It also added rv32 support, cleaned up
config `pnsh64` and added config `pnsh`.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
This adds NuttSBI support for rv-virt device so that to enable CI
checks for NuttSBI later. It allows using `-bios nuttx` option to
run NuttX with QEMU v6.2 w/o OpenSBI.
Signed-off-by: Yanfeng Liu <yfliu2008@qq.com>
HPET can be used as system clock for x86_64
to set HPET as system clock you have to enable:
CONFIG_ONESHOT=y
CONFIG_ALARM_ARCH=y
CONFIG_INTEL64_ONESHOT=y
CONFIG_ARCH_INTEL64_HPET_ALARM=y
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
The ESP32-S3-Korvo-2 is a multimedia development board based on the
ESP32-S3 chip. It is equipped with a two-microphone array which is
suitable for voice recognition and near/far-field voice wake-up
applications. The board integrates multiple peripherals such as
LCD, camera, and microSD card. It also supports JPEG video stream
processing. With all of its outstanding features, the board is an
ideal choice for the development of low-cost and low-power
network-connected audio and video products.
Provide `up_copy_section` function that enables copying data using
the data bus. If the memory destination address is accessible
through the instruction bus, the data is copied using the
correspondent address accessible through the data bus.
The buffer initialization function (`i2s_buf_initialize`) calls
`i2s_buf_free`, which performs buffer initialization within a
critical section (`spin_lock_irqsave`). If this function is called
under the same critical section (same spinlock), initialization
will hang.
This change implements a driver for the two watchdog timers on the BL808, and enables it as part of the timer config. The driver is based on the GP timer driver.
arch/xtensa: add support for capture driver on ESP32 and ESP32|S3|
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Review fixes
arch/xtensa: add support for fault signal on motor control
Squashed:
Initial settings for MCPWM Capture on board level
Created lower half files - compilation ok
Using capture debug features. Simple example on fops works
Successful duty and freq calculation
Documentation update
Fixed and added interupt capabilities for all 3 capture channels
Cleaned defconfig
Renamed macros, added S3 options and moved arch source to common dir
Added support for ESP32S3
Added capture example to defconfig and renamed
Basic bring up ready. New Kconfig options for motor.
Good motor registration
Working on enabling pwm generators
Working on enabling pwm generators
Added fops functions
Success on PWM 50%
stable pwm operation for bdc
Added loopback option for testing
Improved rules on fsm
Working motor direction control
Testing new ISR for fault handling
Issues on fault ISR
Removed fault implementation (not working)
Added support for esp32s3
Documentation improvements
Added default motor spin direction
Added parameter change while running
Got responsive fault indicator
Working brakes - still need to work on starting isr
Fixed single-time ISR initializiation
Working soft brake on fault
Improved KConfig for BDC and BLDC
Kconfig fixed at board level
nucleo-f4229zi board does not come with external ram.
Looking at netnsh config, these changes are also not present.
Issue found when registering i2c char driver for i2ctool. zalloc
returned -ENOMEM
