Alin Jerpelea
67d02a45eb
net: migrate to SPDX identifier
...
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2024-09-12 01:08:11 +08:00
Zhe Weng
3b74cfecc2
net/route: Support longest prefix match for routing
...
Support longest prefix match routing described as "Longest Match" in
RFC 1812, Section 5.2.4.3, Page 75.
Introduced `prefixlen` to indicate the prefix length of currently
founded route, and only looks up for longer prefix in all later steps.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2024-01-09 05:58:10 -08:00
Zhe Weng
2b9633e652
net: Support multiple IPv6 address per netdev
...
Note that user-space related code, like procfs and lifreq related ioctl commands, are not touched in this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-11-07 19:30:36 +08:00
chao.an
a988437e90
net/dev: check the available address further
...
check the available address further to avoid obtain unusable device
Signed-off-by: chao.an <anchao@xiaomi.com>
2021-03-23 06:52:32 -07:00
Alin Jerpelea
37d5c1b0d9
net: Author Gregory Nutt: update licenses to Apache
...
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-02-20 00:38:18 -08:00
Alin Jerpelea
7dc7ef45f1
net: nxstyle fixes
...
Nxstyle fixes to pass CI.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2021-02-20 00:38:18 -08:00
Xiang Xiao
68951e8d72
Remove exra whitespace from files ( #189 )
...
* Remove multiple newlines at the end of files
* Remove the whitespace from the end of lines
2020-01-31 09:24:49 -06:00
Gregory Nutt
efe65749ce
Fix condition logic: The setup seems to support a network without sockets. That is not the case.
...
Squashed commit of the following:
sched/sched/sched_getsockets.c: Fix an error in conditional compilation.
fs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
Documentation/: Remove all references to CONFIG_NSOCKET_DESCRIPTORS == 0
include/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
libs/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
net/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
sched/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
syscall/: Remove all conditional logic based on CONFIG_NSOCKET_DESCRIPTORS == 0
tools/: Fixups for CONFIG_NSOCKET_DESCRIPTORS no longer used to disable sockets.
2019-02-11 15:47:25 -06:00
Gregory Nutt
dcb7ce8afd
tools/nxstyle.c: Add logic to catch another formatting error and to eliminate some false alarms. Includes cosmetic changes to several files ... mostly as a result of testing nxstyle and finding issues.
2018-10-29 16:25:57 -06:00
Gregory Nutt
7d2b250cbc
net/netdev: All utility functions that lookup network devices should begin with netdev_findby_. Also correct some comments and the name of a formal parameter.
2018-10-29 12:21:22 -06:00
Gregory Nutt
9f754ed1dc
include/sys/sockio.h, net/netdev/netdev_ioctl.c: Fix a compile error introducted with commit 34db6d1433
. That commit added the semi-standard ip_msfilter structure to netinet/in.h. Howver, there was a non-standard version of that structure in sys/sockio.h. This commit removes the non-standard version of struct ip_msfilter and adapts the IOCTL and device lookup logic in net/netdev to work with the new, semi-standard version in netinet/in.h.
2018-10-29 06:50:47 -06:00
Xiang Xiao
fd1405d976
netdev_findby_ipv[4|6]addr return netdev_default() as last resort but don't return loopback device if another network device is in the UP state.
2018-08-26 14:40:47 -06:00
Gregory Nutt
c65e1aa3df
Squashed commit of the following:
...
syscalls/: Add syscall support for if_nametoindex() and if_indextoname()
net/: Update some comments.
2018-06-25 12:41:28 -06:00
Gregory Nutt
a0e169ad7b
net/: Fix a sixlowpan typo bug recently introduced; Rename g_ipv6_allzeroaddre with the more meaning g_ipv6_unspecaddr since the all-zero address is the IPv6 unspecified address (sometime IN6_ADDR_ANY). Remove more inline tests for IPv6 multicast with tcommint net_is_addr_mcast() macro. Update some comments.
2018-06-23 12:53:27 -06:00
Gregory Nutt
5bb216fb90
net/: There are many different checks for IPv6 multicast addresses. Most of the checks are different. RFC 3513 clearly specifies how to detect an IPv6 multilcast address: they should begin with 0xffxx. I did not change some of the checks in ipv6_input.c, however. In that file, the comments indicate that the code should only pick of certain mulicast address that begin withi 0xff02.
2018-06-23 10:13:38 -06:00
Gregory Nutt
b54ffe858a
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
Gregory Nutt
9da22a8852
Networking: Fix typo for 802.11 devices in netdev_register(). Was being masked before because depended on CONFIG_NET_MULTLINK.
2017-08-09 09:20:37 -06:00
Gregory Nutt
bd7c84b23e
Remove CONFIG_NETDEV_MULTINIC. This increases code size by a little, but greatly reduces the complexity of the network code.
2017-08-08 14:24:12 -06:00
Gregory Nutt
2ada7d5892
IPv6: Remove comparisons to the address with all ones set. IPv6 does not support broadcast addresses and certainly not in that form. Replace with multicast addresses beginning with 0xff02.
2017-08-07 11:50:50 -06:00
Gregory Nutt
d5207efb5a
Be consistent... Use Name: consistent in function headers vs Function:
2017-04-21 16:33:14 -06:00
Gregory Nutt
eee89102d8
networking: IPv4 change of last PR should also be applied to corresponding IPv6 logic.
2017-04-15 06:00:42 -06:00
ahb
6d18300f98
not a clean fix, but at least makes DHCP working with CONFIG_NETDEV_MULTINIC
2017-04-15 11:13:24 +02:00
Gregory Nutt
7467329a98
Eliminate CONFIG_NO_NOINTS. Lots of files changed -> lots of testing needed.
2016-12-03 16:28:19 -06:00
Gregory Nutt
eb8668b0f7
net/: Add procfs support for network device status
2015-11-27 16:39:14 -06:00
Gregory Nutt
6209c51206
net/: More clean-up of spacing/alignment issues
2015-10-08 15:10:04 -06:00
Gregory Nutt
33085cb309
Networking: The network device list was protected by a re-entrant semaphore. With the recent change to support network device callback, the network stack needs to access the network device list too. Some drivers, however, run the network stack from the interrupt level -- this is bad but a fact in the current state. Of course,those drivers are unable to take the semaphore and will assert.
...
The solution here is to eliminate the device devices semaphore altogether. This eliminates netdev_semtake() and netdev_semgive() and replaces them with net_lock() and net_unlock() which have larger scope as needed for this purpose.
2015-05-31 08:34:03 -06:00
Gregory Nutt
ab50e9d04d
Networking: Get rid of g_ipv4_allzeroaddr and g_ipv4_alloneaddr. It is more efficient and more intuitive to use INADDR_ANY and INADDR_BROADCAST
2015-05-29 15:16:11 -06:00
Gregory Nutt
b756df982d
net/: Lots of build problems introduced into multiple NIC support. Many places where conditional logic based on CONFIG_NETDEV_MULTINIC is confused with CONFIG_NET_MULTILINK. Lots of code changed with IPv6 that was never compiled with MULTINIC enabled. Still some problem with parameter passing.
2015-02-09 18:15:34 -06:00
Gregory Nutt
aec4528882
Cosmetic standardization of some naming in comments
2015-01-19 16:02:56 -06:00
Gregory Nutt
2663538b0a
Networking: Replace all references to the macros net_ipaddr_copy, net_ipaddr_hdrcopy, net_ipaddr_cmp, net_ipaddr_hdrcmp, and net_ipaddr_maskcmp with the appropriate IPv4 or IPv6 version of the macro (such as net_ipv4addr_copy). The goal is to support both IPv4 and IPv6 simultaneously. This requires that the macros be distinct and not conditionally defined to one on or the other.
2015-01-16 13:01:08 -06:00
Gregory Nutt
5e938941a6
Networking: Replace all references to net_ipaddr_t with either in_addr_t on net_ipv6addr_t. The goal is to support both IPv4 and IPv6 simultaneously. This requires that the two types be distinct and not conditionally typedef'ed to net_ipaddr_t.
2015-01-16 12:30:18 -06:00
Gregory Nutt
bee89be4f4
Networking: Drivers can have both IPv4 and IPv6 addesses, but a socket can only only one or the other; The socket connnection structures need to include a union of IPv4 and IPv6 addresses for the local address binding and for the remote address connections
2015-01-16 10:01:54 -06:00
Gregory Nutt
fe8b3c5220
Networking: More detangling of IPv6 logic. Next steps will be more invasive and will get moved to a branch
2015-01-16 08:51:18 -06:00
Gregory Nutt
6a3a2f466c
Update comments and README
2014-11-24 07:25:40 -06:00
Gregory Nutt
aa9700c1ab
Update comments and read me
2014-11-23 12:52:18 -06:00
Gregory Nutt
b36dbe1d89
Add logic to netdev_findbyaddr() to return the correct network device for the case where a broadcast address is used. This change caused trivial ripples through other files because additional parameters are required for netdev_findbyaddr() when CONFIG_NET_MULTINIC
2014-11-23 11:00:22 -06:00
Gregory Nutt
fbd82712da
Add a comment
2014-11-22 09:08:31 -06:00
Gregory Nutt
735aa4289a
Network: Add logic to get a default network device (for the case where are multiple devices). For INADDR_ANY
2014-11-21 14:14:39 -06:00
Gregory Nutt
8b2b7afdae
Update TODO; Cosmetic changes to comments
2014-11-17 15:34:50 -06:00
Gregory Nutt
60246e613b
NET: emoved all includes of uip.h; added includes of ip.h wherever needed. Tried to fix problems of the now missing sneak inclusions because uip.h was removed. There are probably a few of these that were missed.
2014-07-04 19:13:08 -06:00
Gregory Nutt
c362f21815
NET: Rename uip_ipaddr* to net_ipaddr*
2014-06-29 13:11:08 -06:00
Gregory Nutt
899dc193ca
NET: Renaming of IP address types
2014-06-29 12:22:50 -06:00
Gregory Nutt
76fa58ee00
Move all socket-related files from net/ to net/socket. Move net/net.h to net/socket/socket.h
2014-06-28 17:25:18 -06:00
Gregory Nutt
fce2a79abd
Rename uip_driver_s net_driver_s
2014-06-27 16:48:12 -06:00
Gregory Nutt
953764181e
NET: Move net/netdev*.c to net/netdev/netdev*.c
2014-06-27 09:56:45 -06:00