When we do not drop notifier from g_notifier_pending, we need an
isolated dq entry for this queue, otherwise the queued work_s's dq entry
may be modified by the work queue and breaks the chain of
g_notifier_pending.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Return 1 to indicate the work was not cancelled.
Because it is currently being processed by work thread,
but wait for it to finish.
Signed-off-by: ligd <liguiding1@xiaomi.com>
Most tools used for compliance and SBOM generation use SPDX identifiers
This change brings us a step closer to an easy SBOM generation.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
reason:
These interfaces are used when we assign interrupt
handling of the same priority to the corresponding priority work queues.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
1.work_queue a work which call work_queue again
2.work_cancel_sync the work
3.the work is just calling in workthread
4.work_queue the work again,and post the work_cancel_sync wakeup
5.the work is not canceled
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
sched implementation not depends on macro abstraction, so revert below commit:
This reverts commit 4e62d0005a
This reverts commit 0f0c370520
This reverts commit ad0efd04ee
Signed-off-by: chao an <anchao@lixiang.com>
purpose:
1 sched_lock is very time-consuming, and reducing its invocations can improve performance.
2 sched_lock is prone to misuse, and narrowing its scope of use is to prevent people from referencing incorrect code and using it
test:
We can use qemu for testing.
compiling
make distclean -j20; ./tools/configure.sh -l qemu-armv8a:nsh_smp ;make -j20
running
qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic -machine virt,virtualization=on,gic-version=3 -net none -chardev stdio,id=con,mux=on -serial chardev:con -mon chardev=con,mode=readline -kernel ./nuttx
We have also tested this patch on other ARM hardware platforms.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
aio client will queue asynchronous io requests to the worker threads.
if PRIORITY_INHERITANCE is enabled, client thread's priority will be
set to worker threads. There will be multi-boost/restore of worker
threads' priority and assert the system.
No need priority multi-boot/restore to worker thread because client
thread's priority is alway the same.
Signed-off-by: fangxinyong <fangxinyong@xiaomi.com>
1. Update all CMakeLists.txt to adapt to new layout
2. Fix cmake build break
3. Update all new file license
4. Fully compatible with current compilation environment(use configure.sh or cmake as you choose)
------------------
How to test
From within nuttx/. Configure:
cmake -B build -DBOARD_CONFIG=sim/nsh -GNinja
cmake -B build -DBOARD_CONFIG=sim:nsh -GNinja
cmake -B build -DBOARD_CONFIG=sabre-6quad/smp -GNinja
cmake -B build -DBOARD_CONFIG=lm3s6965-ek/qemu-flat -GNinja
(or full path in custom board) :
cmake -B build -DBOARD_CONFIG=$PWD/boards/sim/sim/sim/configs/nsh -GNinja
This uses ninja generator (install with sudo apt install ninja-build). To build:
$ cmake --build build
menuconfig:
$ cmake --build build -t menuconfig
--------------------------
2. cmake/build: reformat the cmake style by cmake-format
https://github.com/cheshirekow/cmake_format
$ pip install cmakelang
$ for i in `find -name CMakeLists.txt`;do cmake-format $i -o $i;done
$ for i in `find -name *\.cmake`;do cmake-format $i -o $i;done
Co-authored-by: Matias N <matias@protobits.dev>
Signed-off-by: chao an <anchao@xiaomi.com>
Problem:
AppBringup task in default priority 240 ->
board_late_initialize() ->
some driver called work_queue() ->
nxsem_post(&(wqueue).sem) failed because sem_count is 0
hp work_thread in default priority 224 ->
nxsem_wait_uninterruptible(&wqueue->sem);
so hp_work_thread can't wake up, worker can't run immediately.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Summary:
- Support arm64 pmu api, Currently only the cycle counter function is supported.
- Using ARM64 PMU hardware capability to implement perf interface, modify all
perf interface related code.
- Support for pmu init under smp.
Signed-off-by: wangming9 <wangming9@xiaomi.com>
Decouple the semcount and the work queue length.
Previous Problem:
If a work is queued and cancelled in high priority threads (or queued
by timer and cancelled by another high priority thread) before
work_thread runs, the queue operation will mark work_thread as ready to
run, but the cancel operation minus the semcount back to -1 and makes
wqueue->q empty. Then the work_thread still runs, found empty queue,
and wait sem again, then semcount becomes -2 (being minused by 1)
This can be done multiple times, then semcount can become very small
value. Test case to produce incorrect semcount:
high_priority_task()
{
for (int i = 0; i < 10000; i++)
{
work_queue(LPWORK, &work, worker, NULL, 0);
work_cancel(LPWORK, &work);
usleep(1);
}
/* Now the g_lpwork.sem.semcount is a value near -10000 */
}
With incorrect semcount, any queue operation when the work_thread is
busy, will only increase semcount and push work into queue, but cannot
trigger work_thread (semcount is negative but work_thread is not
waiting), then there will be more and more works left in queue while
the work_thread is waiting sem and cannot call them.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
The number of work entries will be inconsistent with semaphore count
if the work is canceled, in extreme case, semaphore count will overflow
and fallback to 0 the workqueue will stop scheduling the enqueue work.
Signed-off-by: chao an <anchao@xiaomi.com>
Error: module/mod_insmod.c:203:3: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
203 | strncpy(modp->modname, modname, MODLIB_NAMEMAX);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
wqueue/kwork_thread.c: In function 'work_start_lowpri':
Error: wqueue/kwork_thread.c:212:22: error: '%lx' directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Werror=format-truncation=]
212 | snprintf(args, 16, "0x%" PRIxPTR, (uintptr_t)wqueue);
local/local_sockif.c: In function 'local_getsockname':
Error: local/local_sockif.c:392:11: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
392 | strncpy(unaddr->sun_path, conn->lc_path, namelen);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
chip/esp32_wifi_utils.c: In function 'esp_wifi_scan_event_parse':
Error: chip/esp32_wifi_utils.c:373:37: error: argument to 'sizeof' in 'memset' call is the same expression as the destination; did you mean to dereference it? [-Werror=sizeof-pointer-memaccess]
memset(ap_list_buffer, 0x0, sizeof(ap_list_buffer));
^
stdio/lib_fputs.c: In function 'fputs':
Error: stdio/lib_fputs.c:99:9: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
Error: stdio/lib_fputs.c:99:27: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (s == NULL || stream == NULL)
^
stdio/lib_vfprintf.c: In function 'vfprintf':
Error: stdio/lib_vfprintf.c:40:6: error: nonnull argument 'stream' compared to NULL [-Werror=nonnull-compare]
if (stream)
^
string/lib_strdup.c: In function 'strdup':
Error: string/lib_strdup.c:39:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strndup.c: In function 'strndup':
Error: string/lib_strndup.c:56:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
string/lib_strpbrk.c: In function 'strpbrk':
Error: string/lib_strpbrk.c:39:7: error: nonnull argument 'str' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~
Error: string/lib_strpbrk.c:39:15: error: nonnull argument 'charset' compared to NULL [-Werror=nonnull-compare]
if (!str || !charset)
^~~~~~~~
string/lib_strrchr.c: In function 'strrchr':
Error: string/lib_strrchr.c:40:6: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if (s)
^
Error: time/lib_asctimer.c:73:50: error: '%d' directive output may be truncated writing between 1 and 11 bytes into a region of size between 0 and 12 [-Werror=format-truncation=]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~
time/lib_asctimer.c:73:21: note: directive argument in the range [-2147481748, 2147483647]
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
time/lib_asctimer.c:73:3: note: 'snprintf' output between 17 and 68 bytes into a destination of size 26
snprintf(buf, 26, "%.3s %.3s%3d %.2d:%.2d:%.2d %d\n",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
g_wday_name[tp->tm_wday], g_mon_name[tp->tm_mon],
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tp->tm_mday, tp->tm_hour, tp->tm_min, tp->tm_sec,
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1900 + tp->tm_year);
~~~~~~~~~~~~~~~~~~~
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
include/nuttx/wqueue.h:
libs/libc/wqueue/work_cancel.c:
libs/libc/wqueue/work_queue.c:
sched/wqueue/kwork_cancel.c:
sched/wqueue/kwork_queue.c:
* Fix spelling, grammar, and typos.
* Improve wording in a few areas.
* These changes affect comments only. No functional changes.
