There is an issue that the next alarm is expired immediately after
canceling a RTC alarm. Fixed alarm settings to be completely cleared
when canceling an RTC alarm.
If the system clock is changed during the SPI transfer, the SPI data can
be corrupted. So this commit prohibits the clock change during SPI transfer,
and keep the clock until the transfer is completed.
Introduce PM_CPUFREQLOCK_FLAG_HOLD into the frequency lock mechanism in
power manager, which is used to keep the current frequency without clock
change, for example, during the transfer of a periphral.
UART driver is stopped and re-started during a clock change. When a UART
interrupt is generated in each process, the unexpected behavior will
occur and a console will get stuck with UART driver. This commit fixed
each process is performed atomically.
Currently Nuttx doesn't seem to be any real support for OTG.
In the future when OTG is supported. This Knob can be removed
and drivers can enable their pin sets based on CONFIG_OTG.
(Adding CONFIG_OTG at this time would be misleading.)
stm32f7:SDMMC Use inttypes in printing macro
stm32f7:CAN Use inttypes in printing macro
stm32f7:DMA Use inttypes in printing macro
stm32f7:serial fix compile error from UNUSED() change
Summary:
- This commit adds stack coloration for the idle task
Impact:
- rp2040 with CONFIG_STACK_COLORATION=y
Testing:
- Tested with nsh, nshsram and smp configurations
- NOTE: CONFIG_STACK_COLORATION=y needs to be added
Summary:
- The NuttX for raspberrypi-pico boots via the boot_stage2 provided
by the pico-sdk which sets the MSP at the end of the SRAM.
- However, the NuttX expects the MSP is set to the top of the idle stack.
- This commit fixes this issue.
Impact:
- None
Testing:
- Tested with nsh, nshsram and smp configrations
Summary:
- SP_SECTION was introduced to allocate spinlock in non-cachable
region mainly for Cortex-A to stabilize the NuttX SMP kernel
- However, all spinlocks are now allocated in cachable area and
works without any problems
- So SP_SECTION should be removed to simplify the kernel code
Impact:
- None
Testing:
- Build test only
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
Summary:
- The CONFIG_SMP_IDLETHREAD_STACKSIZE was introduced to optimize
the idle stack size for other than CPU0
- However, there are no big differences between the idle stacks.
- This commit removes the config to simplify the kernel code
Impact:
- All SMP configurations
Testing:
- Tested with ostest with the following configs
- spresense:smp, spresense:rndis_smp
- esp32-devkitc:smp (QEMU), maix-bit:smp (QEMU)
- sabre-6quad:smp (QEMU), sabre-6quad:netnsh_smp (QEMU)
- raspberrypi-pico:smp, sim:smp (x86_64)
Signed-off-by: Masayuki Ishikawa <asayuki.Ishikawa@jp.sony.com>
stm32h7:Serial Use Idel to poll RX DMA
stm32h7:Serial Do not loop in an ISR!
stm32h7:Serial signal txdma completion with semaphore
stm32h7:Serial Apply formatting suggestions from code review
Co-authored-by: Mateusz Szafoni <raiden00pl@gmail.com>
stm32h7: Serail Add Power Managment (Untested)
arch: Allocate the space from the beginning in up_stack_frame
and modify the affected portion:
1.Correct the stack dump and check
2.Allocate tls_info_s by up_stack_frame too
3.Move the stack fork allocation from arch to sched
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
For unknown reasons this message may interferre with the calibration
procedure and result in invalid calibariton data.
We leave only a message informing about the end of the the calibration.
The problem was observed for STM32G4 + IHM16M1.
Change the logic for allocating user heap for PROTECTED_BUILD:
- Don't rely on SRAM1_END alignment
- Make better use of MPU subregions when allocating the heap
- Don't duplicate the calculation of user heap start in kernel heap
allocation; use the previous calculation directly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
All supported arch uses a push-down stack:
The stack grows toward lower addresses in memory. The stack pointer
register points to the lowest, valid working address (the "top" of
the stack). Items on the stack are referenced as positive(include zero)
word offsets from sp.
Which means that for stack in the [begin, begin + size):
1.The initial SP point to begin + size
2.push equals sub and then store
3.pop equals load and then add
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Janne Rosberg has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Ivan Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Jose Pablo Carballo has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Ken Pettit has submitted the ICLA and we can migrate the licenses
to Apache.
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
That field is never used and, in most cases, is never initialized correctly.
This should have no impact to anything with the possible exception of free-running drivers.
Verified using CI builds only.
The comments at the top of the file say this:
```
This will be automatically registered
* - AXI SRAM is a 512kb memory area. This will be automatically registered
* with the system heap in up_allocate_heap, all the other memory
* regions will be registered in arm_addregion().
```
but the implementation was using SRAM123 instead. Furthermore, arm_addregion then re-adds SRAM123 again.
Marco Krahl has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt, S.A has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
This change makes it so that the timeout is set as part of the SDIO_WAITENABLE call instead of the SDIO_EVENTWAIT call. By doing so, you eliminate all opportunity for a race condition.
stm32h7:sdmmc Check if busy ended early
1.To support the different MCU in series(e.g. cortex-m0+)
2.It's redundant since we already specify in compliler option
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
David Sdidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Nicholas Chin has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Paul A. Patience has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Max Holtzberg has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Actia Nordic AB has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Several licenses were missed in the initial work
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Laurent Latil has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Bob Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Pierre-Noel Bouteville has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Bob Feretich has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Ivan Petrov Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Petro Karashchenko has submitted the ICLA and we can migrate the licenses
to Apache.
Ivan Petrov Ucherdzhiev has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Sebastien Lorquet has submitted the ICLA and we can migrate the licenses
to Apache.
Alan Carvalho de Assis has submitted the ICLA and we can migrate the licenses
to Apache.
Uros Platise has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Neil Hancock has submitted the ICLA and we can migrate the licenses
to Apache.
Mateusz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Actia Nordic AB has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
2G Engineering has submitted the SGA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Max Holtzberg has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Michael Jung has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Jukka Laitinen has submitted the ICLA and we can migrate the licenses
to Apache.
David Sidrane has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Johannes Schock has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Mateusz Tomasz Szafoni has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Vasilijev Alexand Anatoljevich has submitted the ICLA and we can migrate the licenses
to Apache.
Alan Carvalho de Assis has submitted the ICLA and we can migrate the licenses
to Apache.
Gregory Nutt has submitted the SGA and we can migrate the licenses
to Apache.
Signed-off-by: Alin Jerpelea <alin.jerpelea@sony.com>
Normally, statically allocated data goes in .bss, followed by the
initial stack, followed by HEAP. However, any data that is statically
allocated in SRAM4 with __attribute__ ((section (".sram4"))) will
clobber, and be clobbered by, the HEAP.
On STM32H7, BDMA can only access SRAM4. Therefore any BDMA buffers (or
any other data) placed in SRAM4 will expose this problem. In one case,
this manifested as a failure of NSH to start, because the SPI6 BDMA
buffers clobbered the /dev/console inode structs, which the OS
allocated earlier.
This PR ensures that only the rest of SRAM4, after any static data, is
added to the heap. This PR also allows SRAM4 to be completely excluded
from the heap by a new Kconfig, CONFIG_STM32H7_SRAM4EXCLUDE, similar
to what CONFIG_STM32H7_DTCMEXCLUDE does for the DTCM region.
Change required in linker scripts:
Every STM32H7 linker script must replace this:
.sram4 :
{
} > sram4
with this:
.sram4_reserve (NOLOAD) :
{
*(.sram4)
. = ALIGN(4);
_sram4_heap_start = ABSOLUTE(.);
} > sram4
or link will fail with: undefined reference to '_sram4_heap_start'.
The Release Notes should document this for users with out-of-tree
boards.
arch/arm/src/stm32h7/Kconfig:
* Add config STM32H7_SRAM4EXCLUDE to allow excluding all of SRAM4
from the HEAP.
arch/arm/src/stm32h7/stm32_allocateheap.c:
* Only when including SRAM4 in the heap, define HAVE_SRAM4,
SRAM4_START, SRAM4_END, and SRAM4_HEAP_START.
* Add "Private Data" section.
* Add extern for_sram4_heap_start, which must be defined in the
board's linker script.
* arm_addregion(): Only add SRAM4 to the heap when configured to
do so, i.e., unless CONFIG_STM32H7_SRAM4EXCLUDE is defined, and
only add the portion of SRAM4 that is past any static data.
boards/arm/stm32h7/nucleo-h743zi/scripts/flash.ld:
boards/arm/stm32h7/nucleo-h743zi/scripts/kernel.space.ld:
boards/arm/stm32h7/nucleo-h743zi2/scripts/flash.ld:
boards/arm/stm32h7/stm32h747i-disco/scripts/flash.ld:
boards/arm/stm32h7/stm32h747i-disco/scripts/kernel.space.ld:
* Update all in-tree STM32H7 board linker scripts as described in
"Change required in linker scripts" above.
Testing:
* Successfully built all of the following configurations:
nucleo-h743zi2:jumbo
nucleo-h743zi2:nsh
nucleo-h743zi:nxlines_oled
nucleo-h743zi:elf
nucleo-h743zi:otg_fs_host
nucleo-h743zi:nsh
nucleo-h743zi:netnsh
nucleo-h743zi:pwm
stm32h747i-disco:nsh
* Tested with custom board.
* nxstyle.
References:
[1] See the dev@nuttx.a.o mailing list discussion started 2021/03/25:
"How to ensure HEAP will not overlap static DMA buffer?"
https://lists.apache.org/thread.html/recf2bb9043f8c9f53c10917e2adb2ec64fe35dc5e6f9a695a7ac6ecc%40%3Cdev.nuttx.apache.org%3E
[2] See arm_addregion() in arch/arm/src/stm32h7/stm32_allocateheap.c
Thanks to Gregory Nutt and David Sidrane for suggestions and reviews.
The maximum number of samples which can be handled without overrun depends on various factors.
This is the user's responsibility to correctly select this value.
Since the interfece to update the sampling time is available for all supported devices,
the user can change the default vaules in the board initialization logic and avoid ADC overrun.
