Gregory Nutt
|
0098c9ec5f
|
SAMA5: ports should not be reset state (seems to make no difference)
|
2013-08-14 17:33:31 -06:00 |
|
Gregory Nutt
|
fe73fe2e23
|
SAMA5: Alternatie clock configuration that yields a perfect 48MHz full speed USB clock and a CPU clock of 384MHz
|
2013-08-14 15:16:04 -06:00 |
|
Gregory Nutt
|
152a5e6da6
|
SAMA5: Fix out of range USB PLL divisor
|
2013-08-14 14:20:01 -06:00 |
|
Gregory Nutt
|
79d5239023
|
SAMA5 OHCI: Use physical address and flush and/or invalidate data caches as necessary
|
2013-08-14 12:23:06 -06:00 |
|
Gregory Nutt
|
16ac25fd09
|
Clean up some LP17xx and STM32 USB host configuration compilation errors due to the massive changes to the USB host interfaces needed to support the SAMA5
|
2013-08-13 17:43:19 -06:00 |
|
Gregory Nutt
|
3f4b90cc3b
|
SAMA5: Major restructuring of the the OHCI driver drivers to better handle the multiple root hub ports and concureent transfers on each port.
|
2013-08-13 16:48:14 -06:00 |
|
Gregory Nutt
|
1700d06d89
|
Separate wait() and enumerate() methods from struct usbhost_driver_s and move to new interface, struct usbhost_connection_s. This is part of the necessary restructuring of the USB host interface to support multiple root hub ports.
|
2013-08-13 15:03:46 -06:00 |
|
Gregory Nutt
|
a65ac5bc72
|
Back out most of the changes of 3b04d08043742b9e65cf38d45988b35bff91daed
|
2013-08-13 14:12:27 -06:00 |
|
Gregory Nutt
|
b575450a04
|
Separate SAMA5 OHCI interrupt handling into separate functions
|
2013-08-13 13:34:35 -06:00 |
|
Gregory Nutt
|
ad258cb3b7
|
SAMA5 OHCI: Fix some erors in the loop that waits for device connection changes
|
2013-08-13 09:44:16 -06:00 |
|
Gregory Nutt
|
9220a748bd
|
Fix re-entry problem in SAMA5 up_putc
|
2013-08-13 09:42:40 -06:00 |
|
Gregory Nutt
|
1ec49f08b4
|
STM32 F3 fixes from John Wharington
|
2013-08-13 07:48:18 -06:00 |
|
Gregory Nutt
|
120a3604c9
|
More changes to USB host interface to support multiple downstream ports
|
2013-08-12 16:29:33 -06:00 |
|
Gregory Nutt
|
a384129490
|
Convert olimex-stm32-p107/nsh configuration to use kconfig-frontends tool. From Max Holtzberg
|
2013-08-12 15:00:28 -06:00 |
|
Gregory Nutt
|
e09bd50fdd
|
First of several changes needed to support multiple USB host root hubs
|
2013-08-12 14:44:06 -06:00 |
|
Gregory Nutt
|
0da218483d
|
SAMA5: Add logic to control VBUS power for OHCI
|
2013-08-12 11:59:10 -06:00 |
|
Gregory Nutt
|
e2d7ab9487
|
SAMA5: Add support for initialization of the USB host and mass storage class
|
2013-08-11 17:52:36 -06:00 |
|
Gregory Nutt
|
ed49812d2c
|
Add untested OHCI driver for the SAMA5; structure naming and header files for USB host initialization prototypes
|
2013-08-11 17:11:32 -06:00 |
|
Gregory Nutt
|
dd3c682443
|
SAMA5: Some improvements to the HSCMI card removal/insertion logic
|
2013-08-11 11:13:11 -06:00 |
|
Gregory Nutt
|
d6264c2c1f
|
Add CAN configuration to STM32 config menu
|
2013-08-10 19:37:35 -06:00 |
|
Gregory Nutt
|
054468d151
|
STM32: Fix STM32 serial init for non-reordered serial ports. From Lorenz Meier
|
2013-08-10 19:33:16 -06:00 |
|
Gregory Nutt
|
544185c683
|
Added option to disable STM32 serial port re-ordering
|
2013-08-10 19:29:44 -06:00 |
|
Gregory Nutt
|
0f20d4581b
|
Added FIONREAD and FIONWRITE to CDC/ACM driver. From Lorenz Meier
|
2013-08-10 19:21:39 -06:00 |
|
Gregory Nutt
|
82b528e0c8
|
Serial FIONREAD, FIONWRITE, and TERMIOS I/O processing from Mike Smith, Andrew Tridgell, and and Lorenz Meier
|
2013-08-10 19:14:05 -06:00 |
|
Gregory Nutt
|
97e13b33ab
|
MMC/SD SDIO: Correct return values when multiple block transfers are suppressed. From Andrew Tridgell via Lorenz Meier
|
2013-08-10 18:29:22 -06:00 |
|
Gregory Nutt
|
da4cebf572
|
SAMA5: Fix HSMCI race condition. Now memory card interface is functional with DMA
|
2013-08-10 18:01:23 -06:00 |
|
Gregory Nutt
|
d60e9e14f6
|
Remove some pre-processor warnings that I am more than tired of seeing
|
2013-08-10 09:18:57 -06:00 |
|
Gregory Nutt
|
968b2553cd
|
Rearrange configuration settings so that ARCH_HAVE_SDIO is moved to higher, sharable level
|
2013-08-10 09:06:53 -06:00 |
|
Gregory Nutt
|
c5e66ae051
|
Extend the virtual-to-physical address conversion logic to handle NFS SRM, UDPH SRAM, and external SRAM and PSRAM.
|
2013-08-09 17:55:27 -06:00 |
|
Gregory Nutt
|
efabe4aaff
|
SAMA5: Centralize logic for conversion between physical and virtual addresses
|
2013-08-09 17:25:53 -06:00 |
|
Gregory Nutt
|
619cd66f33
|
Fix some cache-related issues with the SAMA5 DMA driver
|
2013-08-09 15:25:13 -06:00 |
|
Gregory Nutt
|
628f50ba61
|
SAM3,4,A5 DMA fixes; SAMA5 SPI driver now supports DMA transfers
|
2013-08-09 13:12:16 -06:00 |
|
Gregory Nutt
|
417636e1de
|
SAMA5: Use RDR/TDR registers for DMA, not FIFO registers; change DMA bit settings to match Atmel example. Still no DMA
|
2013-08-08 15:51:16 -06:00 |
|
Gregory Nutt
|
83cbd61c8c
|
SAMA5 DMA: Need to flush caches; DMA channel depends upon direction of DMA; the maximum transfer size in bytes depends on the number of bytes per transfer
|
2013-08-08 13:15:52 -06:00 |
|
Gregory Nutt
|
9d81d4727c
|
More SAMA5 DMAC driver fixes. Still does not work.
|
2013-08-07 17:19:48 -06:00 |
|
Gregory Nutt
|
2df1d56a01
|
SAMA3,4,A5: Misc corrections to DMA and HSMCI drivers
|
2013-08-07 11:32:08 -06:00 |
|
Gregory Nutt
|
4369c172df
|
Change setup logic to hand MTD minor numbers for AT24, HSMCI0, and HSMCI1
|
2013-08-07 11:31:31 -06:00 |
|
Gregory Nutt
|
bfaf64e54e
|
Fix SAM bug: Parmaters reversed in DMA function call
|
2013-08-06 15:47:09 -06:00 |
|
Gregory Nutt
|
b0e8231fa3
|
SAM3,4,A5 DMAC driver fixes
|
2013-08-06 13:27:48 -06:00 |
|
Gregory Nutt
|
6a429e675f
|
SAM3,4,A5: Fix some masked status checks that can generate false error reports
|
2013-08-06 12:36:56 -06:00 |
|
Gregory Nutt
|
ce9eb71495
|
SAMA5: A few early, easy bug fixes. The rest will all be difficult
|
2013-08-06 11:29:53 -06:00 |
|
Gregory Nutt
|
fa011d9aca
|
SAMA5: Add PIO interrupt support. Massive name changes for consistency in PIO vs GPIO naming. SAMA5D3x-EK: Add support for SD card detection PIO interrupts
|
2013-08-06 10:20:17 -06:00 |
|
Gregory Nutt
|
369bf26b20
|
SAMA5: Add HSMCI memory card driver support
|
2013-08-05 16:21:24 -06:00 |
|
Gregory Nutt
|
8c88dcd0c7
|
SAMA5: SPI Driver + AT25 FLASH work; SAM3/4: Correct an error, SPI will not be correctly configured if CONFIG_SPI_OWNBUS=n
|
2013-08-05 10:29:43 -06:00 |
|
Gregory Nutt
|
cbe8c5ed56
|
SAMA5: Add logic to auto-mount a file system on AT25 SPI FLASH for NSH
|
2013-08-05 08:24:39 -06:00 |
|
Gregory Nutt
|
906506c61c
|
SAMA5D3x-EK: At support for the AT25 serial FLASH
|
2013-08-04 16:56:41 -06:00 |
|
Gregory Nutt
|
1060b232e9
|
SAMA5: Add register level debug option for SPI
|
2013-08-04 14:45:24 -06:00 |
|
Gregory Nutt
|
83af194db1
|
SAMA5: SPI driver now supports both SPI0 and SPI1
|
2013-08-04 12:50:20 -06:00 |
|
Gregory Nutt
|
163ec613b1
|
SAMA5: Add basic SPI suppport (untested)
|
2013-08-04 11:08:20 -06:00 |
|
Gregory Nutt
|
1ea55fc2a7
|
SAMA5: Add DMA suppport (untested)
|
2013-08-04 10:44:18 -06:00 |
|