TimJTi
98e47a1770
FUSB302
...
Update fusb302.c
Update fusb302.c
2023-02-12 16:48:44 +08:00
zhangyuan21
8f4cb0fec3
rndis: add endpoint configure
...
ep3 is not avaliable in dummy hcd, so need to
make the endpoint number configurable.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2023-02-12 16:38:11 +08:00
zhangyuan21
f77a824105
usbdev/composite: remove excess uninitialize code
...
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2023-02-12 16:37:21 +08:00
zhangyuan21
4ddcb88c65
usbhost: fixed cdcacm issue
...
1. fixed cdcacm build issue
2. unregister uart driver when usbhost destroy
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2023-02-12 14:17:51 +08:00
Michal Lenc
824e6b3271
lcd/st7789: raise compilation error when CONFIG_SPI_CMDDATA is not set
...
CONFIG_SPI_CMDDATA is required for correct functionality of the display.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
2023-02-11 20:32:20 +08:00
David Sidrane
ac50b3a473
ioexpander/gpio:Add gpio_pin_register_byname
2023-02-11 18:31:40 +08:00
Peter Bee
1949991fe0
drivers/video: add sequence number to video frames
...
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2023-02-09 23:27:15 +08:00
Peter Bee
2ebccd82b6
drivers/video: add timestamp support
...
Add support for timestamp and change in related drivers
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2023-02-09 23:27:15 +08:00
chao an
74ce3b81d3
build/Kconfig: add BINDIR/APPSBINDIR to support out of tree build
...
First decoupling changes related to CMAKE
BINDIR/APPSBINDIR:
Output path of Kconfig which dynamically generated by NuttX Kernel/Apps
This option is consistent with the TOPDIR/APPSDIR by default, and will
be changed when out-of-tree compilation is supported
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-09 20:13:04 +08:00
chao an
e942a7c55e
build/Kconfig: fix warnings detected by kconfiglib
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-09 20:07:46 +08:00
chao an
3a0fdb019d
nuttx: replace all ARRAY_SIZE()/ARRAYSIZE() to nitems()
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-09 20:05:44 +08:00
Huang Qi
b250db5dba
serial: Fix a warning if termios enabled
...
Fix:
```
serial/serial.c: In function 'uart_ioctl':
Error: serial/serial.c:1397:46: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
1397 | FAR struct termios *termiosp = (FAR struct termios *)arg;
| ^
Error: serial/serial.c:1419:46: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
1419 | FAR struct termios *termiosp = (FAR struct termios *)arg;
|
```
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2023-02-08 13:31:35 +08:00
Huang Qi
3e41bd8b35
driver/serial: Convert CR to LF in driver
...
Enable the behavior by default for console,
but configurable by termios.
Binary size:
Before:
text data bss dec hex filename
326460 409 8164 335033 51cb9 nuttx/nuttx
After:
text data bss dec hex filename
326478 409 8164 335051 51ccb nuttx/nuttx
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
2023-02-08 13:31:35 +08:00
Igor Mišić
0a4fbcd123
drivers/mtd: add Kconfig options for RAMTRON emulated page & sector size
2023-02-08 01:44:51 +08:00
chao an
1cb11968b7
net/ip: fix compile break if enable NET_LOCAL_SCM
...
1.
net/slip.c:865:29: warning: unused variable ‘priv’ [-Wunused-variable]
865 | FAR struct slip_driver_s *priv =
| ^~~~
net/slip.c: In function ‘slip_rmmac’:
net/slip.c:895:29: warning: unused variable ‘priv’ [-Wunused-variable]
895 | FAR struct slip_driver_s *priv =
| ^~~~
2.
local/local_sendmsg.c: In function ‘local_sendmsg’:
local/local_sendmsg.c:423:18: warning: ‘count’ may be used uninitialized in this function [-Wmaybe-uninitialized]
423 | return count;
| ^~~~~
local/local_sendmsg.c:131:11: warning: ‘i’ may be used uninitialized in this function [-Wmaybe-uninitialized]
131 | while (i-- > 0)
| ~^~
local/local_sendmsg.c:71:7: note: ‘i’ was declared here
71 | int i;
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 12:46:40 +02:00
Nathan Hartman
5f9cb6faf4
drivers/serial: Fix docstrings on UART interrupt handlers
2023-02-07 04:41:36 +08:00
chao an
1779433c35
wireless/bcm43xxx/qspi: try tx after rx fails
...
1. Try tx after rx fails to avoid gspi_thread busy to try rx
2. Add some delay if alloc frame buffer failed
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 04:40:38 +08:00
chao an
d5ac2be84f
bcm43xxx/bcmf_ioctl.h: pack wl_* structure to avoid unaligned access
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-07 04:40:38 +08:00
chao an
d03b105160
drivers/syslog: correct Kconfig name
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-05 01:05:32 +08:00
chao an
7625126c91
Remove the remain MIN/MAX like macro
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-03 23:22:41 +08:00
chao an
d1162ac58f
mmcsd/mmcsd_spi: remove redundant mmcsd_unlock()
...
Assertion on lm3s6965-ek/qemu-flat if enable CONFIG_DEBUG_ASSERTIONS:
_assert: Current Version: NuttX 12.0.0 666b224c35 Feb 3 2023 19:36:38 arm
_assert: Assertion failed : at file: misc/lib_mutex.c:336 task: nsh_main 0xb385
Backtrace:
nuttx/libs/libc/sched/sched_dumpstack.c:69
nuttx/sched/misc/assert.c:494
nuttx/libs/libc/assert/lib_assert.c:36
nuttx/libs/libc/misc/lib_mutex.c:336
nuttx/drivers/mmcsd/mmcsd_spi.c:421
nuttx/drivers/mmcsd/mmcsd_spi.c:2072
nuttx/boards/arm/tiva/lm3s6965-ek/src/lm_bringup.c:119 (discriminator 3)
nuttx/boards/boardctl.c:335
apps/nshlib/nsh_init.c:144
apps/system/nsh/nsh_main.c:68
nuttx/libs/libc/sched/task_startup.c:70 (discriminator 2)
nuttx/sched/task/task_start.c:134
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-03 16:34:04 +02:00
Xiang Xiao
09841300b0
Remove the remain MIN/MAX like macro
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-02-03 20:42:57 +08:00
chao an
4c8d244fae
sched/getpid: replace syscall getpid/tid/ppid() to kernel version
...
NuttX kernel should not use the syscall functions, especially after
enabling CONFIG_SCHED_INSTRUMENTATION_SYSCALL, all system functions
will be traced to backend, which will impact system performance.
Signed-off-by: chao an <anchao@xiaomi.com>
2023-02-02 10:33:01 +08:00
Gustavo Henrique Nihei
e6b204f438
nuttx: Use MIN/MAX definitions from "sys/param.h"
...
Signed-off-by: Gustavo Henrique Nihei <gustavo.nihei@espressif.com>
2023-02-01 23:47:44 +08:00
anjiahao
52eaefcc8e
watchdog:fix Kconfig typo
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-02-01 19:50:47 +08:00
pengyiqiang
b1773934fe
note_driver: fix build error
...
note/note_driver.c: In function 'note_isenabled':
note/note_driver.c:278:7: error: invalid type argument of unary '*' (have 'int')
278 | if (CPU_ISSET(&g_note_filter.mode.cpuset, this_cpu()) == 0)
| ^~~~~~~~~
note/note_driver.c:278:7: error: invalid operands to binary << (have 'int' and 'volatile cpu_set_t *' {aka 'volatile unsigned char *'})
278 | if (CPU_ISSET(&g_note_filter.mode.cpuset, this_cpu()) == 0)
| ^~~~~~~~~
| |
| volatile cpu_set_t * {aka volatile unsigned char *}
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2023-02-01 14:30:33 +08:00
Xiang Xiao
9f027208d4
fs: Add model field to geometry and mtd_geometry_s
...
the model is very useful to track the device info
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-31 11:50:28 -03:00
Ville Juven
da83836da7
drivers/mmcsd: Fix kconfig error regarding MMCSD_IOCSUPPORT
...
Something I noticed in CI:
drivers/mmcsd/Kconfig:32:warning: 'MMCSD_IOCSUPPORT': number is invalid
2023-01-31 13:56:17 +01:00
Xiang Xiao
55679aec5f
drivers/camera: Support the private data for imgsensor and imgdata
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-31 08:04:39 +01:00
dongjiuzhu1
74e032e924
drivers/pipes: fix write busy loop because POLLOUT always ready.
...
the size of pipes buffer +1 as compensate the full indicator
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
2023-01-31 12:45:16 +08:00
Xiang Xiao
004853d6d1
drivers/watchdog: Fix the wrong value of WATCHDOG_AUTOMONITOR_PING_INTERVAL
...
if CONFIG_WATCHDOG_AUTOMONITOR_PING_INTERVAL equals 0, we should set
WATCHDOG_AUTOMONITOR_PING_INTERVAL to CONFIG_WATCHDOG_AUTOMONITOR_TIMEOUT / 2, not 0
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-31 11:54:36 +08:00
Zhe Weng
d3dd349649
net: Implement shutdown() for usrsock
...
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-31 11:15:01 +08:00
lilei19
1d8af7e105
add holder for mutex
...
Signed-off-by: lilei19 <lilei19@xiaomi.com>
2023-01-31 12:08:05 +09:00
Nathan Hartman
6b89b6f945
Remove executable permissions from source files
...
* arch/arm/src/sama5/sam_flexcom_spi.h,
arch/risc-v/src/mpfs/mpfs_ihc_sbi.c,
drivers/usbdev/adb.c,
libs/libc/math/lib_scalbn.c,
libs/libc/math/lib_scalbnf.c,
net/ipfrag/Make.defs,
net/ipfrag/ipfrag.c,
net/ipfrag/ipfrag.h,
net/ipfrag/ipv4_frag.c,
net/ipfrag/ipv6_frag.c: Remove executable permission.
2023-01-30 20:34:51 -03:00
helei8
4b4004b874
drivers/mmcsd: Add MMC_IOC_CMD ioctl
...
Signed-off-by: helei8 <helei8@xiaomi.com>
2023-01-30 14:09:23 -03:00
Zhe Weng
ff68d9ac04
net/tun: Change TUN/TAP to use IOB
...
TUN/TAP is not working after IOB offload, try to fix.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-31 00:39:15 +08:00
Zhe Weng
af0a35f9ae
net/slip: Change SLIP to use IOB
...
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-30 23:42:01 +08:00
anjiahao
6f2f62f4ce
watchdog:fix Kconfig typo
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-01-30 15:49:50 +01:00
Oleksandr Oryshchenko
0842a291e0
[Drivers] Add smart_loop_register_driver call to drivers_initialize
2023-01-30 11:09:40 +08:00
Oleksandr Oryshchenko
28f92e8238
[MTD/SmartFS] Extract register_driver call to own function
2023-01-30 11:09:40 +08:00
Xiang Xiao
7d66a16c53
Minor style clean up
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-28 19:53:20 +02:00
chao an
94db8a9414
wireless/ieee80211: update ieee80211 header
...
Signed-off-by: chao an <anchao@xiaomi.com>
2023-01-29 00:34:26 +08:00
Xiang Xiao
c137abf4b0
drivers/wireless: Remove the duplicated bc_bifup check from bcmf_wl_auth_event_handler
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-28 11:31:28 -03:00
Petro Karashchenko
8e72b07a62
nuttx: Add missing FAR and CODE
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-27 13:23:25 +08:00
chentao9
1e8d9466d6
ref: charge: add support for voltage infomation
...
Signed-off-by: chentao9 <chentao9@xiaomi.com>
2023-01-27 00:40:43 +02:00
丁欣童
63879598fa
sensors/fakesensor: fix timestamp is woring when batch.
...
Signed-off-by: 丁欣童 <dingxintong@xiaomi.com>
2023-01-27 00:39:15 +02:00
梁超众
7b8ef5dc1b
usrsock: only TCP data should be aggregrated for rpmsg case
...
non-streaming socket's rx data should not be aggregrated.
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
2023-01-27 00:38:32 +02:00
Jiuzhu Dong
5bd448825b
driver/sensor: sync set buffer number to remote proc
...
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2023-01-27 00:37:49 +02:00
Jiuzhu Dong
c9c5940382
driver/sensor: using recursive lock to fix deadlock beacuse rptun reentrancy
...
nxsem_wait
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../sched/semaphore/sem_wait.c:155 (discriminator 2)
sem_wait
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../sched/semaphore/sem_wait.c:273
nxmutex_lock
/home/neo/projects/monkey/nuttx/include/nuttx/mutex.h:161
nxrmutex_lock.isra.0
/home/neo/projects/monkey/nuttx/include/nuttx/mutex.h:348
sensor_rpmsg_unsub_handler
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:1048
rpmsg_virtio_rx_callback
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../openamp/open-amp/lib/rpmsg/rpmsg_virtio.c:334
virtqueue_notification
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../openamp/open-amp/lib/virtio/virtqueue.c:623
up_block_task
/home/neo/projects/monkey/nuttx/arch/arm/src/common/arm_blocktask.c:82 (discriminator 2)
nxsem_tickwait
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../sched/semaphore/sem_tickwait.c:116
rptun_wait_tx
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/rptun/rptun.c:522
rpmsg_virtio_wait_tx_buffer
/home/neo/projects/monkey/nuttx/include/openamp/rpmsg_virtio.h:120
sensor_rpmsg_push_event_one
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:778
sensor_rpmsg_alloc_stub
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:547
sensor_rpmsg_sub_handler
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../drivers/sensors/sensor_rpmsg.c:991
rpmsg_virtio_rx_callback
/home/neo/projects/monkey/nuttx/arch/arm/src/../../../openamp/open-amp/lib/rpmsg/rpmsg_virtio.c:334
Signed-off-by: Jiuzhu Dong <dongjiuzhu1@xiaomi.com>
2023-01-27 00:37:49 +02:00
fangzhenwei
8a1489c291
driver/h4:increase h4 uart tx/rx buffer default size
...
tx buffer size 1024 to 2048
rx buffer size 1024 to 8096
Signed-off-by: fangzhenwei <fangzhenwei@xiaomi.com>
2023-01-27 00:27:02 +02:00
xinbingnan
7076de9e8a
sensors/bmi160.c: fix the problem Linux SPI doesn't working properly
...
CH341A chip only supports SPI MODE0, and BMI160 supports both MODE0 and MODE3. So, changing MODE3 to MODE0 makes all cases available.
Signed-off-by: xinbingnan <xinbingnan@xiaomi.com>
2023-01-27 00:26:13 +02:00
Petro Karashchenko
e3a8e1e3ef
drivers/mtd/mtd_config: switch from semaphore to mutex for exclusive access
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-26 10:24:05 +08:00
Petro Karashchenko
6e3cb04531
drivers/sensors/msa301: switch from semaphore to mutex for exclusive access
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-26 10:24:05 +08:00
Petro Karashchenko
f952b8456c
assert: switch from ASSERT(0/false) to PANIC
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-26 10:15:34 +08:00
Xiang Xiao
1280a2a8f9
Launch the initial task through task_spawn instead of nxtask_create
...
to share the code with the code path of posix_spawn
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-25 23:34:52 +02:00
raiden00pl
30015b862c
drivers/foc: add ioctl interface that turn off all PWM switches
2023-01-21 12:28:16 +08:00
raiden00pl
91d43edffd
drivers/foc: support for BEMF sensing
2023-01-20 21:26:27 +02:00
Masayuki Ishikawa
dc454765fb
Revert "add holder for mutex"
...
This reverts commit fc176addeb
.
2023-01-19 06:04:48 +09:00
To Doan Ngoc Hai
6ca75deec8
drivers/can/can.c: Change size_t type printf formatter %d -> %zu
2023-01-18 22:03:17 +08:00
lilei19
fc176addeb
add holder for mutex
...
Signed-off-by: lilei19 <lilei19@xiaomi.com>
2023-01-18 17:40:58 +08:00
ligd
5b22eba0bd
rptun ping: fix warning when open CONFIG_SYSTEM_TIME64
...
rptun/rptun_ping.c: In function 'rptun_ping':
rptun/rptun_ping.c:171:20: error: format '%lu' expects argument of type 'long unsigned int', but argument 3 has type 'time_t' {aka 'long long int'} [-Werror=format=]
171 | syslog(LOG_INFO, "avg: s %" PRIu32 ", ns %ld\n", ts.tv_sec, ts.tv_nsec);
| ^~~~~~~~~~ ~~~~~~~~~
| |
|
Signed-off-by: ligd <liguiding1@xiaomi.com>
2023-01-17 10:59:59 +08:00
ligd
354abd4e8e
uinput: fix uinput compile failed, if no define CONFIG_UINPUT_TOUCH
...
input/uinput.c:81:28: error: field 'lower' has incomplete type
81 | struct touch_lowerhalf_s lower;
| ^~~~~
CC: pipes/pipe.c
Signed-off-by: ligd <liguiding1@xiaomi.com>
2023-01-17 10:55:52 +08:00
crafcat7
2ec117b3ca
fs/fs_fsync:Fix the expected error of socket,fifo and pipe returning error in fsync case
2023-01-17 01:56:40 +08:00
ligd
23d1d4c42a
power: avoid sem_wait called in IRQ handler
...
error backrace:
_assert --- assert again
sem_wait
pm_unregister
wdog_notifier
panic_notifier_call_chain
_assert
dataabort
Signed-off-by: ligd <liguiding1@xiaomi.com>
2023-01-17 01:25:27 +08:00
ligd
38c6f20d17
pm: add pm_domain_lock/unlock support
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
2023-01-17 01:25:27 +08:00
ligd
d2ef505684
pm: add lock for pm_auto_updatestate_cb()
...
Signed-off-by: ligd <liguiding1@xiaomi.com>
2023-01-17 01:25:27 +08:00
Xiang Xiao
a851ad84c3
net: consistent the net sem wait naming conversion
...
to prepare the new mutex wait function
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-15 12:31:30 -03:00
TimJTi
f5e8c30808
Add ACT8945A power driver
...
Update act8945a.c
Update Kconfig
Update act8945a.c
Corrections (xiaoxiang781216)
2023-01-14 18:49:25 +08:00
liushuai25
ea67dafd93
Fix scope issues with "switch ... case"
...
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
2023-01-14 13:38:37 +08:00
liushuai25
57295d750d
Use C89 compatible initializer and modify code format
...
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
Update drivers/video/mipidsi/mipi_dsi_device.c
Co-authored-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2023-01-13 23:10:56 +08:00
liushuai25
6b729487fb
feat: add mipidsi support
...
add mipi dsi subsystem support.
reference links:
https://github.com/torvalds/linux/blob/master/drivers/gpu/drm/drm_mipi_dsi.c
https://github.com/torvalds/linux/blob/master/include/video/mipi_display.h
Signed-off-by: liushuai25 <liushuai25@xiaomi.com>
2023-01-13 23:10:56 +08:00
Jani Paalijarvi
bd461a1016
drivers/eeprom/i2c_xx24xx.c: Fix compiler warnings
...
Debug prints were not able to handle 64bit off_t and size_t.
2023-01-13 23:08:58 +08:00
Lee Lup Yuen
6de5a862cd
drivers/input: Add driver for Goodix GT9XX Touch Panel
...
This PR adds the driver for Goodix GT9XX I2C Touch Panel, which will be called by PINE64 PinePhone.
Our driver follows the design of the NuttX Driver for [Cypress MBR3108](https://github.com/apache/nuttx/blob/master/drivers/input/cypress_mbr3108.c ).
We have documented our driver here: ["NuttX Touch Panel Driver for PinePhone"](https://lupyuen.github.io/articles/touch2#appendix-nuttx-touch-panel-driver-for-pinephone )
`drivers/input/Kconfig`: Added option `INPUT_GT9XX` to select GT9XX Driver
`drivers/input/Make.defs`: Added GT9XX Driver to Makefile
`drivers/input/gt9xx.c`, `gt9xx.h`: I2C Driver for GT9XX Touch Panel
2023-01-13 12:19:53 +08:00
zhanghongyu
48c9d10336
net_socket: add accept4 function
...
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2023-01-11 23:28:08 +08:00
xinbingnan
1ce93a7d9a
sensors/bmi160.c: fix i2C read and write behavior
...
There is a problem with the original driver reading and writing behavior, refer to the driver of mpu60x0 to make corresponding changes.
Signed-off-by: xinbingnan <xinbingnan@xiaomi.com>
2023-01-11 21:12:29 +08:00
梁超众
aca1a065a8
move usrsock to kernel space
...
Signed-off-by: 梁超众 <liangchaozhong@xiaomi.com>
2023-01-11 15:14:03 +08:00
chengkai
f864e5f657
wireless/bluetooth: add interrupt_context hander for netsnoop
...
Signed-off-by: chengkai <chengkai@xiaomi.com>
2023-01-10 18:08:22 +08:00
田昕
587305723e
drivers/pipe:add PIPEIOC_POLLTHRES to set POLLIN/POLLOUT threshold
...
Signed-off-by: 田昕 <tianxin7@xiaomi.com>
2023-01-10 13:33:13 +08:00
Zhe Weng
5e42bd97cd
virtio/net: Try fix virtnet logic
...
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
2023-01-09 10:10:49 +09:00
anjiahao
96ec6983db
watchdog:use 'V' to stop watchdog
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-01-06 20:02:26 +08:00
yinshengkai
6064aa8bb5
drivers/note: remove choice in Kconfig
...
To support multiple note drivers to be used at the same time
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-06 16:23:00 +08:00
yinshengkai
2e4c4822eb
segger/sysview: add up_perf_freq result chaeck
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-06 15:06:15 +08:00
Sebastien Lorquet
af6c990498
add support for more is25 mtd devices
2023-01-06 11:52:37 +08:00
anjiahao
5e878186c7
watchdog:add a callback when painc stop the watchdog
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
2023-01-06 10:42:37 +08:00
Xiang Xiao
1a59f4ed00
mm/map: Remove the unnessary map.h inclusion in various drivers
...
and Fix include/nuttx/mm/map.h:55:28: error: 'struct task_group_s' declared inside parameter list will not be visible outside of this definition or declaration
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-05 16:06:53 +02:00
yinshengkai
8f823ce320
sergger: add note_ prefix to sysview
...
change 1: rename sysview.c to note_sysview.c
change 2: add note_ prefix to sysview's public function
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-05 22:04:52 +08:00
yinshengkai
77466742c7
drivers/segger: register sysview to note drivers list
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-05 22:04:52 +08:00
yinshengkai
4ba7624804
Revert "Sysview add prefix kconfig to add an option to decouple sched_note calls"
...
This reverts commit f72f7ebee0
.
2023-01-05 22:04:52 +08:00
yinshengkai
e9ed994fec
syslog: merge multiple lib_sprintf into one
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-05 02:00:43 +08:00
yinshengkai
74b8776872
syslog: put variable initialization in the front
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-05 02:00:43 +08:00
yinshengkai
72b19200b5
syslog: replace the switch statement with an array of strings
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-05 02:00:43 +08:00
Xiang Xiao
7179d57026
fs: Check offset and length more carefully in mmap callback
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 17:43:59 +02:00
Xiang Xiao
b0a0ba3ad7
fs: Move mmap callback before truncate in [file|mountpt]_operations
...
since mmap may exist in block_operations, but truncate may not,
moving mmap beforee truncate could make three struct more compatible
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 17:43:59 +02:00
Xiang Xiao
779a610ca3
Remove the unnecessary NULL fields in global instance definition of file_operations
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 00:32:13 +02:00
Xiang Xiao
1815f8b731
drivers/note: Add const to g_notelog_ops
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 00:21:18 +02:00
Xiang Xiao
98ab55ef68
drivers/note: Replace the scritical section with spin_xxx_wo_note
...
to avoid to generate the unexpected schedule information
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2023-01-04 00:21:18 +02:00
zouboan
56c6943311
sensors/mpu60x0: fix build warning about data type
2023-01-03 01:45:56 +08:00
yinshengkai
1cee890aa7
drivers/note: unify the spinlock operation in noteram
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-02 22:29:01 +08:00
Jukka Laitinen
f33dc4df3f
Change FIOC_MMAP into file operation call
...
- Add mmap into file_operations and remove it from ioctl definitions.
- Add mm_map structure definitions to support future unmapping
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-01-02 11:23:20 -03:00
Jukka Laitinen
41e9df2f3e
Add ftruncate into file operation calls
...
- Add truncate into file_operations
- Move truncate to be common for mountpt_operations and file_operations
- Modify all drivers to initialize the operations struct accordingly
Signed-off-by: Jukka Laitinen <jukkax@ssrc.tii.ae>
2023-01-02 11:23:20 -03:00
yinshengkai
275b2e70a4
syslog: fix extra line breaks in syslog when SYSLOG_COLOR_OUTPUT is enabled
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2023-01-02 21:22:46 +08:00
Xiang Xiao
cc9166274a
drivers/note: Fix the mismatch of va_end call
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-31 14:57:47 +02:00
yinshengkai
f85102d81b
drivers/note: adjust note kconfig order
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-30 15:50:30 -03:00
yinshengkai
ca5fcc58c2
sched: move SCHED_INSTRUMENTATION_xxx to note Kconfig
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-30 15:50:30 -03:00
yinshengkai
64b6df42a4
drivers/note: register notelog device
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-30 22:21:12 +08:00
yinshengkai
376e30193b
drivers/note: remove sched_note_syscall_xxx in notelog
...
syslog is a system call, which will cause recursion after turning on SCHED_INSTRUMENTATION_SYSCALL
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-30 22:21:12 +08:00
yinshengkai
bc7c520eca
drivers/note: add note_syscall_enter parameter list
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-29 09:25:54 -03:00
yinshengkai
dd32eccfc3
drivers/note: Move taskname related functions to note_driver.c
...
so all note drivers can retrieve the task name even after the task exit
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-26 15:03:57 +08:00
Xiang Xiao
7322eafba7
drivers/usb: Fix the typo error in Kconfig
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-25 01:01:26 +02:00
Xiang Xiao
02e92d2ba5
Fix ower/pm/pm_procfs.c:46:15: error: format '%lu' expects argument of type 'long unsigned int', but argument 5 has type 'time_t' {aka 'long long int'}
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-24 11:26:48 -03:00
wangbowen6
069fac1c67
power/relay: add relay driver framework for NuttX
...
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-12-22 20:30:49 +08:00
TimJTi
5f7bf743c5
Add LP503x RGB LED driver
...
style corrections
Update lp503x.h
Update lp503x.h
Update lp503x.c
Update lp503x.h
post review changes
2022-12-22 13:39:05 +08:00
Petro Karashchenko
b107e4f417
nuttx: unify MIN, MAX and ABS macro definition across the code
...
Signed-off-by: Petro Karashchenko <petro.karashchenko@gmail.com>
2022-12-21 09:31:28 +08:00
pengyiqiang
72fdea5c13
video/fb: initializes the info structure
...
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2022-12-21 01:16:55 +02:00
zhanghongyu
ba9ef06970
tun: add ioctl cmd TUNGETIFF implement
...
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
2022-12-20 21:15:50 +08:00
Peter Bee
2b11fd585f
drivers/video: fix typo
...
Wrong buf used
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-20 17:00:44 +08:00
jihandong
8e6185f4ad
driver/fb: support linux info.
...
add struct fix_screeninfo and var_screeninfo, and related ioctl,
macro.
Signed-off-by: jihandong <jihandong@xiaomi.com>
2022-12-20 15:54:00 +08:00
Xiang Xiao
243983328a
drivers/video: Correct the code style
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
Xiang Xiao
21e35362a3
drivers/video: Add stop_capture function
...
and ensure imgsensor_ops_s::stop_capture get called
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
Xiang Xiao
eb4dabaac6
drivers/video: Check th size for IMGSENSOR_CTRL_TYPE_U[8|16|32]
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
Xiang Xiao
4773eec916
drivers/video: Move the clip operation from video_s_selection to validate_frame_setting
...
to ensure the validation is same for VIDIOC_S_SELECTION, VIDIOC_S_PARM and VIDIOC_S_FMT
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
Xiang Xiao
10d79195ba
drivers/video: Replace malloc/realloc/free with kmm_[malloc/realloc/free]
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
Xiang Xiao
ec1cbed9b0
drivers/video: Zero all fields in an output struct
...
and don't zero fields which is used as input
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
Xiang Xiao
5eb8189c26
drivers/video: Remove validate_frame_setting NULL check from video_[s|try]_fmt
...
since the check is already done in validate_frame_setting
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 20:43:07 +08:00
yinshengkai
6f66c0ea0b
drivers/note: sched_note support mulit-channel
...
call callbacks for different channels in sched_note_*
noteram channel is enabled by default
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-17 19:41:21 +08:00
Xiang Xiao
9cc608e4c4
drivers/serial: Don't call uart_shutdown if the serial work as a console
...
since uart_setup is skip at line 556 for the console device
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-17 01:04:15 +02:00
Xiang Xiao
d5689e070b
net/arp: Remove nuttx/net/arp.h
...
1.move ARPHRD_ETHER to netinet/arp.h
1.move arp_entry_s to net/arp/arp.h
2.move arp_input to nuttx/net/netdev.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-16 22:10:59 +02:00
Xiang Xiao
06842c824a
sched/note: Change sched_note_[begin|end] to macro
...
improve the speed
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-16 12:20:53 +02:00
yinshengkai
552cf4b549
merge sched_note_spinxx into sched_note_spincommon
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-16 17:03:53 +08:00
chao an
01eb4d586b
mm/iob: iob members are initialized after allocate
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-16 09:51:53 +08:00
yinshengkai
2460ff4f78
drivers/note: rename /dev/note to /dev/note/ram
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-15 15:53:49 +08:00
Xiang Xiao
03f07effc9
drivers/note: Fix the style issue
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-14 21:24:13 +02:00
Xiang Xiao
c36640e205
drivers/segger: Rename nuttx/note/note_sysview.h to nuttx/segger/sysview.h
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-14 21:24:13 +02:00
Xiang Xiao
126c93015f
drivers/node: Rename sched_note.c to to note_driver.c
...
prepare to support the multiple note driver
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-14 21:24:13 +02:00
Xiang Xiao
d7307ef26c
drivers/node: Rename note_register to note_initialize
...
prepare to support the multiple note driver
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-14 21:24:13 +02:00
Xiang Xiao
1555c9b8f8
drivers/video: Zero next field of dequeued buffer before return dequeue_vbuf_unsafe
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-13 21:38:22 +02:00
Xiang Xiao
e15bccaa71
drivers/video: Don't need update vbuf_tail in dequeue_vbuf_unsafe
...
since it is already done in video_framebuff_queue_container
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-13 21:38:22 +02:00
Xiang Xiao
01d7f44480
drivers/video: Merge vbuf_next assignment in video_framebuff_queue_container
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-13 21:38:22 +02:00
Xiang Xiao
d09f1fb186
drivers/video: Keep the old state in case of fail
...
and ensure the internal state get clear if sz equals zero
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-13 21:38:22 +02:00
Xiang Xiao
ae3cadf03c
drivers/video: Skip all action if video_framebuff_realloc_container doesn't change the container size
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-13 21:38:22 +02:00
Xiang Xiao
aa20b1e8bd
drivers/video: Zero all video_framebuff_t fields in video_framebuff_init
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-13 21:38:22 +02:00
chao an
cda8b79950
virtio/net: reschedule interrupt work If rx data remaining
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-12 16:56:11 +09:00
yinshengkai
026c8eede0
drivers/note: unify spinlock related functions
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-10 02:30:24 +08:00
Peter Bee
77504aa1b5
drivers/video: minor fix
...
Fix missing header for bool in imgsensor.h and FAR in video.c
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-09 23:37:49 +08:00
yinshengkai
09814831b8
sched: move sched_note.c to drivers/note
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-12-09 23:36:11 +08:00
Peter van der Perk
f72f7ebee0
Sysview add prefix kconfig to add an option to decouple sched_note calls
2022-12-08 17:49:55 +01:00
zhangyuan21
d2c52db68e
usb/ft232r: fixed build issue
...
1. fixed build issue;
2. make sure the read data length must greater than or equal to 2;
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2022-12-08 22:49:26 +08:00
zhangyuan21
5dc4e23bb7
usbdev/adb: fixed usbclass steup issue
...
1. set usbdev when usb class bind
2. don't call EP_SUBMIT when receive OUT message
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2022-12-07 12:24:09 +08:00
sunkun3
d9acaeaccf
usbdev:resolve ADB compilation errors
...
Signed-off-by: sunkun3 <sunkun3@xiaomi.com>
2022-12-07 12:24:09 +08:00
zhangyuan21
9150ea0e95
arch_alarm: don't init local variable for fpu test case fail
...
D16 register will be cleared when compiling with gcc on some boards.
Signed-off-by: zhangyuan21 <zhangyuan21@xiaomi.com>
2022-12-07 12:21:16 +08:00
Peter Bee
31347da187
drivers/video: add support for V4L2 mmap-ed buffer
...
Support V4L2_MEMORY_MMAP memory mode
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-07 01:21:46 +08:00
Xiang Xiao
b526e06de1
drivers/lcd: Reuse lib_meminstream_s as much as possible
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 14:27:55 +01:00
Xiang Xiao
055f1f33eb
libc/stream: Rename [lib_stream_](put|get) to [lib_stream_](putc|getc)
...
to make the naming style consistent with each other
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 14:27:55 +01:00
Xiang Xiao
4be9ec774b
Don't download tarballs if a local git repo found
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 10:47:36 +01:00
Xiang Xiao
f142cf0e55
drivers/video: Remove memset from cleanup_streamresources
...
since initialize_streamresources will do it
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 10:35:26 +01:00
Xiang Xiao
99311ed6a5
drivers/video: Should do uninitialization if is_initialized is true
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 10:35:26 +01:00
Xiang Xiao
92e72f8624
drivers/video: Return zero if gamma curve isn't supported in initialize_scene_gamma
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 10:35:26 +01:00
Xiang Xiao
c8868b3745
drivers/video: Return 0 in case g_video_sensor_ops or get_supported_value is NULL
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-05 10:35:26 +01:00
Xiang Xiao
c6e9edcbb6
net: Rename arp_arpin to arp_input
...
align with other similar function(e.g. ipv4_input and ipv6_input)
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-12-04 20:39:21 +08:00
chao an
34d2cde8a8
net/l2/l3/l4: add support of iob offload
...
1. Add new config CONFIG_NET_LL_GUARDSIZE to isolation of l2 stack,
which will benefit l3(IP) layer for multi-MAC(l2) implementation,
especially in some NICs such as celluler net driver.
new configuration options: CONFIG_NET_LL_GUARDSIZE
CONFIG_NET_LL_GUARDSIZE will reserved l2 buffer header size of
network buffer to isolate the L2/L3 (MAC/IP) data on network layer,
which will be beneficial to L3 network layer protocol transparent
transmission and forwarding
------------------------------------------------------------
Layout of frist iob entry:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
iob | Reserved | io_len |
-------------------------------------------------
-------------------------------------------------------------
Layout of different NICs implementation:
iob_data (aligned by CONFIG_IOB_ALIGNMENT)
|
| io_offset(CONFIG_NET_LL_GUARDSIZE)
| |
-------------------------------------------------
Ethernet | Reserved | ETH_HDRLEN | io_len |
---------------------------------|---------------
8021Q | Reserved | ETH_8021Q_HDRLEN | io_len |
---------------------------------|---------------
ipforward | Reserved | io_len |
-------------------------------------------------
--------------------------------------------------------------------
2. Support iob offload to l2 driver to avoid unnecessary memory copy
Support send/receive iob vectors directly between the NICs and l3/l4
stack to avoid unnecessary memory copies, especially on hardware that
supports Scatter/gather, which can greatly improve performance.
new interface to support iob offload:
------------------------------------------
| IOB version | original |
|----------------------------------------|
| devif_iob_poll() | devif_poll() |
| ... | ... |
------------------------------------------
--------------------------------------------------------------------
1> NIC hardware support Scatter/gather transfer
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
dev->d_iob: |
--------------- ---------------
io_data iob1 | | | iob3 | | |
\ --------------- ---------------
--------------- | --------------- |
iob0 | | | | iob2 | | | |
--------------- | --------------- |
\ | / /
\ | / /
----------------------------------------------
NICs io vector | | | | | | | | | |
----------------------------------------------
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to each iobs)
--------------------------------------------------------------------
2> CONFIG_IOB_BUFSIZE is greater than MTU:
TX:
"(CONFIG_IOB_BUFSIZE) > (MAX_NETDEV_PKTSIZE + CONFIG_NET_GUARDSIZE + CONFIG_NET_LL_GUARDSIZE)"
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll("NIC"_txpoll) callback() // "NIC"_txpoll
|
"NIC"_send()
(dev->d_iob->io_data[CONFIG_NET_LL_GUARDSIZE - NET_LL_HDRLEN(dev)])
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
pkt/ipv[4/6]_input()/...
|
|
NICs io vector receive(iov_base to io_data)
--------------------------------------------------------------------
3> Compatible with all old flat buffer NICs
TX:
tcp_poll()/udp_poll()/pkt_poll()/...(l3|l4)
/ \
/ \
devif_poll_[l3|l4]_connections() devif_iob_send() (nocopy:udp/icmp/...)
/ \ (copy:tcp)
/ \
devif_iob_poll(devif_poll_callback()) devif_poll_callback() /* new interface, gather iobs to flat buffer */
/ \
/ \
devif_poll("NIC"_txpoll) "NIC"_send()(dev->d_buf)
RX:
[tcp|udp|icmp|...]ipv[4|6]_data_handler()(iob_concat/append to readahead)
|
|
[tcp|udp|icmp|...]_ipv[4|6]_in()/...
|
|
netdev_input() /* new interface, Scatter/gather flat/iob buffer */
|
|
pkt/ipv[4|6]_input()/...
|
|
NICs io vector receive(Orignal flat buffer)
3. Iperf passthrough on NuttX simulator:
-------------------------------------------------
| Protocol | Server | Client | |
|-----------------------------------------------|
| TCP | 813 | 834 | Mbits/sec |
| TCP(Offload) | 1720 | 1100 | Mbits/sec |
| UDP | 22 | 757 | Mbits/sec |
| UDP(Offload) | 25 | 1250 | Mbits/sec |
-------------------------------------------------
Signed-off-by: chao an <anchao@xiaomi.com>
2022-12-03 11:47:04 +08:00
Peter Bee
c26fd6565d
drivers/video: enhance v4l2 compatibility
...
Add common BSD v4l2 header file
Complete ioctls according to standard v4l2 drivers
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-03 02:48:01 +08:00
Peter Bee
87e16c3694
drivers/video: add support for yuv420p
...
Add calc functions for buffer size (yuv420p is 6Byte/4px)
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-02 13:18:20 +08:00
Peter Bee
365b1f4bb8
drivers/video: add support for YUYV format
...
Add YUYV format which is used by most USB Cameras
Signed-off-by: Peter Bee <bijunda1@xiaomi.com>
2022-12-02 13:18:20 +08:00
wangbowen6
84fa994f51
rpmsgdev: rpmsgdegv ioctl and seek buf fix
...
1. rpmsgdev ioctl: should assgin back the client return value to
cookie->result, then this return value can be returned to the
application;
2. rpmsgdev seek: the type "off_t" may be 64bit, so modify the offset
in "struct rpmsgdev_lseek" to int64_t too;
3. rpmsgdev_seek: the rpmsgdev_seek in client should update the
filep->f_pos after the seek operation;
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-12-02 12:05:53 +08:00
FASTSHIFT
0ae242aa8d
drivers/video/fb: add poll support
...
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2022-12-01 15:08:03 +08:00
pengyiqiang
c4535ee66a
drivers/input/touchscreen_upper: add missing function code comments
...
Signed-off-by: pengyiqiang <pengyiqiang@xiaomi.com>
2022-12-01 10:26:11 +08:00
chao an
0de9e387a7
net/loopback: reuse devif_loopback() logic for device lo(loopback)
...
TX poll callback in device lo(loopback) can be replaced by devif_loopback()
from devif_poll() hook, remove duplicate code to reuse this logic
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-30 10:07:14 +08:00
Masayuki Ishikawa
8b4ffb8d3e
virtio: Add virtio drivers
...
Summary:
- This commit adds virtio-mmio and virtio-net drivers
Impact:
- None (new drivers)
Testing:
- Tested with rv-virt (will be updated later) with QEMU-7.1
Signed-off-by: Masayuki Ishikawa <Masayuki.Ishikawa@jp.sony.com>
2022-11-29 13:16:44 +08:00
田昕
1d8d6e5ed2
drivers/syslog:support stream as syslog backend.
...
Signed-off-by: 田昕 <tianxin7@xiaomi.com>
2022-11-28 20:19:00 +08:00
yinshengkai
699e3e8291
let segger RTT kconfig sink one level
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-11-28 15:22:58 +08:00
Xiang Xiao
af2b491420
driver/segger: Move SYSLOG_RTT config from drivers/syslog to drivers/segger
...
and remove include/nuttx/syslog/syslog_rtt.h
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-27 23:10:39 +01:00
Xiang Xiao
fd268d7123
drivers/segger: Add STREAM_RTT option
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-27 23:10:39 +01:00
Xiang Xiao
ac365ab7e9
drivers/segger: Refine Kconfig option
...
1.Add SEGGER_SYSVIEW_RTT_CHANNEL option
2.SEGGER_RTT_BUFFER_SIZE_UP always default to 1KB
3.SEGGER_SYSVIEW_RTT_BUFFER_SIZE default to SEGGER_RTT_BUFFER_SIZE_UP
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-27 23:10:39 +01:00
Xiang Xiao
6d30726a1b
Remove the unnecessary "return;" at the end of function
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-27 22:23:50 +01:00
yinshengkai
126b33c488
drivers/segger: add Segger RTT stream support
...
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
2022-11-27 23:39:20 +08:00
chao an
6fa60627eb
net/devif/ip: build l2 header on the IP layer
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-27 12:13:45 +08:00
chao an
8850dee746
net/devif: move preprocess of txpoll into common code
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-27 12:11:12 +08:00
TimJTi
4075509579
4 byte read mode bit position
...
GG25Q devices have the 4 byte read mode in bit 0 not bit 3 of the status register. This changes allows for both depending on the JEDEC DEVICE ID that is read back.
2022-11-25 10:11:11 -03:00
Xiang Xiao
5fd1379d3f
syslog: Move syslog stream to libc like other stream implementation
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-25 01:46:31 +08:00
Karel Kočí
221b098846
drivers/lcd/st7789: fix invalid displayed color
...
The write has to be in number of bytes per pixel as single SPI exchange
is used to identify single pixel write by the ST7789 driver. By issuing
only byte writes the displayed color is corrupted as it is stripped.
This fix consist of setting SPI to correct number of exchanged bytes and
then passing correctly number of words to the SPI exchange.
This also covers usage of st7789_wrram in st7789_putrun as that one was
passing just number of pixels as size but the correct is now number of
bytes.
2022-11-21 14:43:12 -03:00
Robert-Ionut Alexa
039262484a
drivers/sensors: add LTR308 ambient light sensor
...
Add support for the LTR308 ambient light sensor through I2C. Currently,
the interrupt-driven mode of operation is not supported.
Signed-off-by: Robert-Ionut Alexa <robertalexa2000@gmail.com>
2022-11-21 23:48:52 +08:00
Xiang Xiao
a34230c954
Fix Error: chip/stm32_qencoder.c:989:46: error: format specifies type 'unsigned long' but the argument has type 'uint32_t' (aka 'unsigned int')
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-21 17:39:04 +08:00
Xiang Xiao
7bda8747b2
Fix Error: audio/wm8994.c:485:26: error: result of comparison of constant 65536 with expression of type 'uint16_t' (aka 'unsigned short') is always false
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-21 17:39:04 +08:00
Xu Xingliang
d1be53e748
drivers/segger: make RTT_MODE configurable
...
CHAMPION-2373
To allow use NO_BLOCK mode, so the system keeps running when debugger disconnected.
Signed-off-by: Xu Xingliang <xuxingliang@xiaomi.com>
2022-11-21 17:19:09 +08:00
chao an
dff81756cf
drivers/regulator_rpmsg: destroy nxsem properly
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-21 01:15:48 +08:00
chao an
07604b3220
drivers/rpmsg/clk/ioe: destroy nxsem properly
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-21 01:15:48 +08:00
chao an
74cfa7ddb9
drivers/misc/rwbuffer: destroy nxmutex/nxsem properly
...
Signed-off-by: chao an <anchao@xiaomi.com>
2022-11-21 01:15:48 +08:00
chao an
a1abb818a9
drivers/misc/rpmsgdev: destroy nxmutex properly
2022-11-21 01:15:48 +08:00
chao an
40581558d3
drivers/loop: destroy nxmutex properly
2022-11-21 01:15:48 +08:00
chao an
d256b8334e
drivers/mtd: destroy nxmutex properly
2022-11-21 01:15:48 +08:00
Xiang Xiao
3453fe799d
Fix video/max7456.c:775:19: error: unused function '__mx7_write_reg__dmm'
...
video/max7456.c:792:19: error: unused function '__mx7_write_reg__dmdi'
video/max7456.c:809:19: error: unused function '__mx7_write_reg__dmah'
video/max7456.c:826:19: error: unused function '__mx7_write_reg__dmal'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
Xiang Xiao
a4eeeb23de
Fix sensors/mpu60x0.c:650:23: error: unused function '__mpu_read_who_am_i'
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
Xiang Xiao
d8e53d7b4f
Fix error: format specifies type 'unsigned long' but the argument has type 'unsigned int'
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
Xiang Xiao
416d7301c4
Fix wireless/ieee80211/bcm43xxx/bcmf_gspi.c:151:20: error: unused function 'bcmf_gspi_write_reg_32'
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-20 14:34:44 +01:00
raiden00pl
45a24c1894
drivers/motor/foc/foc_dummy.c: remove unused variable
2022-11-18 01:39:26 +08:00
qinwei1
8021dfece6
sched/task/task_getpid: getpid should return process id not thread id
...
Summary:
implement the right semantics:
1. getpid should return the main thread id
2. gettid should return the current thread id
Refer to:
https://github.com/apache/incubator-nuttx/issues/2499
https://github.com/apache/incubator-nuttx/pull/2518
Signed-off-by: qinwei1 <qinwei1@xiaomi.com>
2022-11-17 17:58:08 +08:00
Hang Fan
5a367ad59d
driver/mtd: add support for mx25l16 serial flash
...
Signed-off-by: Hang Fan <fanhang@xiaomi.com>
2022-11-17 06:22:45 +01:00
wangbowen6
162870b750
rpmsgdev: support blocked read/write operation
...
Signed-off-by: wangbowen6 <wangbowen6@xiaomi.com>
2022-11-16 16:44:18 +08:00
David Sidrane
d05a5d16ee
imxrt:Support TJ1103 PHY
2022-11-15 02:27:35 +08:00
anjiahao
a4563b8744
Fix the coding style and typo issue
...
Signed-off-by: anjiahao <anjiahao@xiaomi.com>
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2022-11-14 09:34:04 +09:00