Xiang Xiao
0536953ded
Kernel module should prefer functions with nx/kmm prefix
...
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
2021-01-13 08:57:58 +01:00
ligd
6ad1181923
serial: should include <signal.h> explicitly
...
Change-Id: I20260ad3bcceb30207c9c12041dd95de41e13777
Signed-off-by: ligd <liguiding1@xiaomi.com>
2020-12-29 04:21:42 -08:00
Juha Niskanen
ca7a7ccbeb
Fix some typos in comments
...
Signed-off-by: Juha Niskanen <juha.niskanen@haltian.com>
2020-11-08 18:58:20 +01:00
Yoshinori Sugino
c13f869432
Modify SIGSTP to SIGTSTP
...
Follow the POSIX description.
SIGTSTP should be sent when the Ctrl-Z characters is encountered, not SIGSTP.
Testing:
Built with hifive1-revb:nsh (CONFIG_SERIAL_TERMIOS=y, CONFIG_SIG_DEFAULT=y and CONFIG_TTY_SIGTSTP=y)
2020-10-29 01:12:43 -07:00
Xiang Xiao
650e18baa1
serial: Shouldn't mangle pid when ISIG is changed
...
Let's check ISIG flag directly instead
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Change-Id: I060f70eefc79b1c34aa11ed4071179d2ae5fa5ca
2020-09-25 06:48:26 -07:00
Xiang Xiao
5c80b94820
Replace #include <semaphore.h> to #include <nuttx/semaphore.h>
...
Since the kernel side should call nxsem_xxx instead and remove the unused inclusion
2020-02-01 08:27:30 -06:00
ligd
6710ba47d8
drivers/serial/serial_dma.c: Still need reset xmit buffer when meet TCOFLUSH. This is an amendment to 8fb19a4359
.
2019-11-07 06:40:21 -06:00
Gregory Nutt
c8831ac3c8
drivers/serial/serial_io.c and serial_dma.c: Fix some long lines.
2019-11-06 07:10:24 -06:00
ligd
8fb19a4359
drivers/serial/serial_dma.c: Avoid uart_xmitchars_done() move the tail bigger then head. If ioctl(TCOFLUSH) occurs between uart_xmitchars_dma() and uart_xmitchars_done(), TCOFLUSH will reset xmit buffer, then uart_xmitchars_done() will move the 'tail' ahead of 'head', then sends lots of wrong data.
2019-11-06 07:07:30 -06:00
Gregory Nutt
0d203fd535
drivers/serial: The upper half serial driver configuration CONFIG_SERIAL_DMA used to enable DMA on both RX and TX streams. This was replaced with CONFIG_SERIAL_RXDMA and CONFIG_SERIAKL_TXDMA which will permit supporting DMA on only one or both streams.
2019-04-24 12:11:40 -06:00
Gregory Nutt
993321dda6
drivers/serial: Add support for Ctrl-Z. This works just like the recently added Ctrl-C support except that SIGSTP is sent when the Ctrl-Z characters is encountered vs. SIGINT.
2018-09-02 15:36:25 -06:00
Xiang Xiao
51708745f6
drivers/serial/serial_dma.c: Fix typo error in uart_recvchars_dma()
2018-08-29 08:31:43 -06:00
Gregory Nutt
0756cf66ed
sched/signal: Add support for SIGINT in addition to SIGKILL. drivers/serial: Use SIGINT instead of SIGKILL when control-C is pressed.
2018-08-28 12:15:31 -06:00
Gregory Nutt
c0d234a474
Squashed commit of the following:
...
drivers/serial/Kconfig: It is no longer necessary to restrict Ctrl-C handling to the FLAT build
sched/signal: Add a new configuration option to select signal default actions, separate handling of signal default actions from both task startup logic and from the serial TTY Ctrl-C logic. Add a signal set in the group structure to keep track of what signals have been set to the default action. In dispatching signals in PROTECTED or KERNEL mode, use this signal set to determine if the default signal handler is attached and dispatch the signal in kernel mode for the default actions.
2018-08-27 11:40:09 -06:00
Xiang Xiao
9e922873d4
drivers/serial: Move head/tail pointer reset to uart_recvchars_dma since dma may be still transferring in the background.
2018-08-26 10:03:30 -06:00
ligd
11f8dc735c
Squashed commit of the following:
...
drivers/serial: Add Ctrl-C/Ctrl-X support. This is an initial working implementation that still requires that several details be resolved.
sched/task/task_start.c: Add default signal action to SIGKILL.
2018-08-26 08:49:08 -06:00
Gregory Nutt
ab9d124528
serial: Remove confusing inline functions. Correct attribution for serial DMA logic
2015-11-15 08:39:01 -06:00
Gregory Nutt
7f1ac36194
Serial driver: Move serial DMA logic to a separate file
2015-11-15 07:58:08 -06:00