Problem:
- `iob_copyout` to `d_buf` doesn't set `io_len` of the IOB, so `devif_poll` failed to copy the data into `buf` by `iob_copyout`
Modification:
- Just Move the IOB in `devif_forward`.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Loopback device will consume the d_iob packet in upper layer protocol,
in order to avoid null pointer access, reprepare iob buffer before polling connections
Signed-off-by: chao an <anchao@xiaomi.com>
l3/l4 stack will decouple the reference of d_buf gradually, Only legacy
devices still retain d_buf support, new net devices will use d_iob
Signed-off-by: chao an <anchao@xiaomi.com>
Fix icmpv6_reply logic broken by commit 48311cc61f and 391b501639.
- 48311cc61f "Fix unaligned memory access when creating ICMP Port Unreachable messages"
- It removed `htonl` function outside `data`, then the byte order may be wrong, so add `htons` back.
- 391b501639 "net: extract l3 header build code into new functions"
- It mis-removed the `memmove`, and the icmpv6 has no payload copied after this commit.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Set IPv4 flag before processing ipforward, otherwise the ICMP packet responded by ipforward may sometimes be regarded as IPv6.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Split out ipv4_nat_in/outbound_internal which returns entry instead of error code, for later ICMP error types, does not change any current logic.
Reason: Outer packet doesn't have information of port, so we need to find entry by inner packet, and apply the entry to outer packet.
| Outer Packet: SRC = Peer IP<No Port>, DST = External IP<No Port> |
| Inner Packet: SRC = External IP:Port, DST = Peer IP:Port |
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
This commit is for later ICMP error types processing, and does not change any current logic.
Reason for supporting both side of modification is that an inbound ICMP Error MSG may carry original packet like this:
| IP HDR: SRC = Peer IP, DST = External IP |
| ICMP HDR: ERROR MSG |
| <Origin> IP HDR: SRC = External IP, DST = Peer IP |
| <Origin> L4 HDR: SRC = External Port, DST = Peer Port |
So we need to support inbound translation (External -> Local) on SRC or DST of each header.
And so do the outbound direction.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif_loopback needs to be applied on l2 data, and was broken by commit below, now fix it.
| commit 8850dee746
| Author: chao an <anchao@xiaomi.com>
| Date: Sun Nov 27 03:31:07 2022 +0800
|
| net/devif: move preprocess of txpoll into common code
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif/ipv4_input.c: In function ‘ipv4_in’:
devif/ipv4_input.c:305:15: warning: declaration of ‘ret’ shadows a previous local [-Wshadow]
305 | int ret = ipv4_forward(dev, ipv4);
| ^~~
devif/ipv4_input.c:151:7: note: shadowed declaration is here
151 | int ret = OK;
| ^~~
Signed-off-by: chao an <anchao@xiaomi.com>
The following APIs need to be overriden by the arch after enabling
CONFIG_NET_ARCH_CHKSUM, move these functions to the common header
file to avoid prototype conflicts
uint16_t chksum(uint16_t sum, FAR const uint8_t *data, uint16_t len);
uint16_t net_chksum(FAR uint16_t *data, uint16_t len);
uint16_t ipv4_upperlayer_chksum(FAR struct net_driver_s *dev, uint8_t proto);
uint16_t ipv6_upperlayer_chksum(FAR struct net_driver_s *dev,
uint8_t proto, unsigned int iplen);
uint16_t ipv4_chksum(FAR struct ipv4_hdr_s *ipv4);
Signed-off-by: chao an <anchao@xiaomi.com>
TX poll callback in device lo(loopback) can be replaced by devif_loopback()
from devif_poll() hook, remove duplicate code to reuse this logic
Signed-off-by: chao an <anchao@xiaomi.com>
Add link layer length in loopback is unnecessary after below change checkin:
| commit 6fa60627eb
| Author: chao an <anchao@xiaomi.com>
| Date: Sun Nov 27 02:13:21 2022 +0800
|
| net/devif/ip: build l2 header on the IP layer
|
| Signed-off-by: chao an <anchao@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
fix build break if enable CONFIG_NET_IPv6 only
In file included from tcp/tcp_sendfile.c:38:
tcp/tcp_sendfile.c: In function ‘sendfile_eventhandler’:
tcp/tcp_sendfile.c:173:27: error: ‘struct tcp_conn_s’ has no member named ‘domain’
173 | DEBUGASSERT(conn->domain == PF_INET6);
| ^~
Signed-off-by: chao an <anchao@xiaomi.com>
inet/ipv4_setsockopt.c: In function ‘ipv4_setsockopt’:
inet/ipv4_setsockopt.c:200:19: error: invalid use of undefined type ‘struct udp_conn_s’
200 | conn->ttl = ttl;
| ^~
inet/ipv4_setsockopt.c:223:19: error: invalid use of undefined type ‘struct udp_conn_s’
223 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~
inet/ipv4_setsockopt.c:223:30: error: ‘_UDP_FLAG_PKTINFO’ undeclared (first use in this function)
223 | conn->flags |= _UDP_FLAG_PKTINFO;
| ^~~~~~~~~~~~~~~~~
inet/ipv4_setsockopt.c:223:30: note: each undeclared identifier is reported only once for each function it appears in
inet/ipv4_setsockopt.c:227:19: error: invalid use of undefined type ‘struct udp_conn_s’
227 | conn->flags &= ~_UDP_FLAG_PKTINFO;
Signed-off-by: ligd <liguiding1@xiaomi.com>
ARP support is only built if the Ethernet link layer is supported.
Continue and send the ARP request only if this device uses the
Ethernet link layer protocol.
Signed-off-by: chao an <anchao@xiaomi.com>
The `datalen` indicates the whole len of original packet, which will become the payload inside icmpv6 packet.
Using `datalen = (ipv4->len[0] << 8) + ipv4->len[1]` in icmp_reply is correct, because it includes IPv4 header, but when coming to IPv6, the `len` does not include the header, so we need to add it back.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Issue:
recv return 0 means peer side has already closed the connection according to
man page's description.
0 is returned without set errno when TCP rx timeout happens with current
design.
Solution:
return result instead of ir_result when ir_result is 0, then -1 will be
returned with errno set to EAGAIN for tcp rx buffer empty case.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
when usrsock client try to connect usrsock server local_loop
socket with an invalid port, server cannot find a listener conn
to handle this connet request, then it will response a TCP_RESET
packet via nuttx existing processing, when before conn recv this
RESET packet, it will trigger usrsock_rpmsg_server poll return
and send REMOTE_CLOSE event to usrsock client.
so usrsock connect_event fucntion need handle this event.
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Support ICMP ECHO REQUEST & REPLY. Id of ICMP is processed like port of TCP in NAT. However, our ICMP stack doesn't have a method to manage id allocation like tcp_selectport(), the id is set by apps (like icmp_ping.c) without conflict avoidance, so not adding such conflict avoidance logic to ICMP stack when implementing NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
Add basic functions for NAT (NAPT), remaining some logic unimplemented (UDP, ICMP, port assignment, etc). NAT for TCP can work now (unless port conflicts).
Outbound: LAN -> Forward -> NAT(only if targeting at WAN) -> WAN
Inbound: WAN -> NAT(only from WAN, change dest) -> Forward -> LAN
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
In the past, header file paths were generated by the incdir command
Now they are generated by concatenating environment variables
In this way, when executing makefile, no shell command will be executed,
it will improve the speed of executing makfile
Signed-off-by: yinshengkai <yinshengkai@xiaomi.com>
net_chksum_adjust is used for fast checksum adjustment after modifying some fields in a network packet. Will be used in NAT.
Signed-off-by: Zhe Weng <wengzhe@xiaomi.com>
devif/ipv6_input.c: In function 'ipv6_input':
devif/ipv6_input.c:59:33: error: 'TCPIPv6BUF' undeclared (first use in this function); did you mean 'IPv6BUF'?
59 | #define PAYLOAD ((FAR uint8_t *)TCPIPv6BUF)
| ^~~~~~~~~~
devif/ipv6_input.c:302:14: note: in expansion of macro 'PAYLOAD'
302 | payload = PAYLOAD; /* Assume payload starts right after IPv6 header */
|
Signed-off-by: chao an <anchao@xiaomi.com>
Error: route/net_del_ramroute.c:94:9: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
^
Error: route/net_del_ramroute.c:94:31: error: format specifies type 'unsigned long' but the argument has type 'unsigned int' [-Werror,-Wformat]
HTONL(match->target), HTONL(match->netmask));
~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~
/github/workspace/sources/nuttx/include/debug.h:232:23: note: expanded from macro 'ninfo'
^
/github/workspace/sources/nuttx/include/debug.h:102:43: note: expanded from macro '_none'
do { if (0) syslog(LOG_ERR, format, ##__VA_ARGS__); } while (0)
~~~~~~ ^~~~~~~~~~~
/github/workspace/sources/nuttx/include/netinet/in.h:233:17: note: expanded from macro 'HTONL'
^
/github/workspace/sources/nuttx/include/endian.h:63:25: note: expanded from macro '__swap_uint32'
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
cunittest error case: protocol invalid need return 123(EPROTONOSUPPORT)
now return 106(EAFNOSUPPORT)
inet_setup will check type ande protocol
Signed-off-by: zhanghongyu <zhanghongyu@xiaomi.com>
Fixed by commit:
| net: remove pvconn reference from all devif callback
|
| Do not use 'pvconn' argument to get the connection pointer since
| pvconn is normally NULL for some events like NETDEV_DOWN.
| Instead, the connection pointer can be reliably obtained from the
| corresponding private pointer.
Signed-off-by: chao an <anchao@xiaomi.com>
1.Add cellular link layer enum definition and register flow
2.Add ioctl flow to set cellular NICs parameters
Signed-off-by: luojun1 <luojun1@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Issue description:
usrsock will wait for state.recvsem forever because no event triggers
state.recvsem post operation when connect operation in server side is
non-blocking.
Solution:
trigger state.recvsem post operation after receive USRSOCK_EVENT_SENDTO_READY.
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
igmp/igmp_input.c: In function 'igmp_input':
igmp/igmp_input.c:201:31: warning: the comparison will always evaluate as 'false' for the address of 'grpaddr' will never be NULL [-Waddress]
201 | if (igmp->grpaddr == 0)
| ^~
In file included from nuttx/include/nuttx/net/netstats.h:67,
from igmp/igmp_input.c:53:
nuttx/include/nuttx/net/igmp.h:132:12: note: 'grpaddr' declared here
132 | uint16_t grpaddr[2]; /* 32-bit Group address */
| ^~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
fix build warning on GCC 12.2.0
In file included from local/local_fifo.c:25:
In function 'local_hd_name',
inlined from 'local_open_receiver' at local/local_fifo.c:593:3:
local/local_fifo.c:128:12: warning: '%s' directive output may be truncated writing up to 107 bytes into a region of size 97 [-Wformat-truncation=]
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ^~~~~~~~~~~~~~~~~~~~~~~~~
local/local_fifo.c: In function 'local_open_receiver':
local/local_fifo.c:128:40: note: format string is defined here
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ^~
In function 'local_hd_name',
inlined from 'local_open_receiver' at local/local_fifo.c:593:3:
local/local_fifo.c:127:3: note: 'snprintf' output between 15 and 122 bytes into a destination of size 109
127 | snprintf(outpath, LOCAL_FULLPATH_LEN - 1,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
128 | CONFIG_NET_LOCAL_VFS_PATH "/%s" LOCAL_HD_SUFFIX, inpath);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
f_domain is used to determine protocol family when CONFIG_NET_IPv4 and CONFIG_NET_IPv6 are both defined, but not correctly used in ipv4_dev_forward because of typo (there's not a config named CONFIG_NET_IPv5) which may cause IPv4 packets to be forwarded as IPv6.
Signed-off-by: wengzhe <wengzhe@xiaomi.com>
NuttShell (NSH) NuttX-10.3.0
ap> ifconfig
=================================================================
Program received signal SIGSEGV, Segmentation fault.
==3920365==ERROR: AddressSanitizer: global-buffer-overflow on address 0x57fb4f2a at pc 0x57177067 bp 0xf1ffebb8 sp 0xf1ffeba8
READ of size 1 at 0x57fb4f2a thread T0
...................
| #10 0xf7ac4339 in __asan::__asan_report_load1 (addr=1476087594) at ../../../../../src/libsanitizer/asan/asan_rtl.cpp:117
| #11 0x57177067 in strncmp (cs=0x57fb4f2a "", ct=0x582d36e0 "stat", nb=4) at string/lib_strncmp.c:40
| #12 0x57f3b467 in netprocfs_opendir (relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/net_procfs.c:398
| #13 0x572b3ae1 in procfs_opendir (mountpt=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at procfs/fs_procfs.c:625
| #14 0x572879ff in open_mountpoint (inode=0xf4602c20, relpath=0x57fb4f26 "net", dir=0xf1ffed80) at vfs/fs_dir.c:127
...................
Signed-off-by: chao an <anchao@xiaomi.com>
I noticed that the conn instance will leak during stress test,
The close work queued from tcp_close_eventhandler() will be canceled
by tcp_timer() immediately:
Breakpoint 1, tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
(gdb) bt
| #0 tcp_close_eventhandler (dev=0x565cd338 <up_irq_restore+108>, pvpriv=0x5655e6ff <getpid+12>, flags=0) at tcp/tcp_close.c:71
| #1 0x5658bf1e in devif_conn_event (dev=0x5660bd80 <g_sim_dev>, flags=512, list=0x5660d558 <g_cbprealloc+312>) at devif/devif_callback.c:508
| #2 0x5658a219 in tcp_callback (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>, flags=512) at tcp/tcp_callback.c:167
| #3 0x56589253 in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:378
| #4 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #5 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #6 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #7 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #8 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #9 0x5655983f in nxtask_start () at task/task_start.c:129
(gdb) c
Continuing.
Breakpoint 2, tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
(gdb) bt
| #0 tcp_update_timer (conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:178
| #1 0x5658952a in tcp_timer (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_timer.c:708
| #2 0x5658dd47 in tcp_poll (dev=0x5660bd80 <g_sim_dev>, conn=0x5660c4a0 <g_tcp_connections>) at tcp/tcp_devpoll.c:95
| #3 0x5658b95f in devif_poll_tcp_connections (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:601
| #4 0x5658b9ea in devif_poll (dev=0x5660bd80 <g_sim_dev>, callback=0x565770f2 <netdriver_txpoll>) at devif/devif_poll.c:722
| #5 0x56577230 in netdriver_txavail_work (arg=0x5660bd80 <g_sim_dev>) at sim/up_netdriver.c:308
| #6 0x5655999e in work_thread (argc=2, argv=0xf3db5dd0) at wqueue/kwork_thread.c:178
| #7 0x5655983f in nxtask_start () at task/task_start.c:129
Since a separate work will add 24 bytes to each conn instance,
but in order to support the feature of asynchronous close(),
I can not find a better way than adding a separate work,
for resource constraints, I recommend the developers to enable
CONFIG_NET_ALLOC_CONNS, which will reduce the ram usage.
Signed-off-by: chao an <anchao@xiaomi.com>
1. separate command catagory of bt/pktradio from wireless ioctl
2. Remove commoand count limit to support vendor command
Signed-off-by: chao an <anchao@xiaomi.com>
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCGIFHWADDR provides the hardware
address (e.g., Ethernet MAC, etc.) of a network interface. It is
based on Linux. (BSD-based systems don't have this ioctl.) The Linux
implementation sets sa_family to ARPHRD_ETHER for Ethernet and IEEE
802.11 interfaces [1]. NuttX was setting it to NET_SOCK_FAMILY for
these interface types as well as 6LoWPAN and PKTRADIO; this was
incorrect and also the value of NET_SOCK_FAMILY varies based on
Kconfig settings. Correcting this to ARPHRD_ETHER for Ethernet and
IEEE 802.11 and ARPHRD_IEEE802154 for 6LoWPAN and PKTRADIO.
References:
[1] 'man 7 netdevice' on Linux.
* net/netdev/netdev_ioctl.c:
(netdev_ifr_ioctl): The ioctl SIOCSIFHWADDR sets the hardware address
(e.g., Ethernet MAC, etc.) of a network interface. Radio devices may
have different lengths of hardware addresses, such as
NET_6LOWPAN_EADDRSIZE (8), NET_6LOWPAN_SADDRSIZE (2), or
RADIO_MAX_ADDRLEN (8). Also, Kconfig CONFIG_PKTRADIO_ADDRLEN allows
the user to set any arbitrary size. Note that while the sister ioctl
SIOCGIFHWADDR "get hardware address" copies
`dev->d_mac.radio.nv_addrlen` bytes, SIOCSIFHWADDR was copying
NET_6LOWPAN_ADDRSIZE bytes unconditionally. Depending on which radio
is used, this could be incorrect. Fixing it to use
`dev->d_mac.radio.nv_addrlen` for SIOCSIFHWADDR as well. Also adding
DEBUGASSERT to ensure this is within bounds of source and
destination of the copy.
Seperate usrsock device driver with usrsock core function layer
to make it more flexiable to adopt other kind of usrsock interface driver
Signed-off-by: liangchaozhong <liangchaozhong@xiaomi.com>
In file included from route/net_del_ramroute.c:30:
route/net_del_ramroute.c: In function ‘net_match_ipv4’:
route/net_del_ramroute.c:93:9: warning: format ‘%lx’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘unsigned int’ [-Wformat=]
93 | ninfo(" target=%08lx netmask=%08lx\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
route/net_del_ramroute.c:93:23: note: format string is defined here
93 | ninfo(" target=%08lx netmask=%08lx\n",
| ~~~~^
| |
| long unsigned int
| %08x
mld/mld_timer.c: In function ‘mld_gendog_work’:
mld/mld_timer.c:118:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
118 | ifindex = (int)arg;
| ^
mld/mld_timer.c: In function ‘mld_v1dog_work’:
mld/mld_timer.c:237:13: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
237 | ifindex = (int)arg;
| ^
Signed-off-by: chao an <anchao@xiaomi.com>
allow usrsock USRSOCK_MESSAGE_RESPONSE_DATA_ACK with no-preload data
so addrlen could be updated to valuelen_nontrunc of usrsock_message_datareq_ack_s
nsh> usrsocktest
...
Testing group "basic_getsockname" =>
[TEST ASSERT FAILED!]
In function "basic_getsockname_open":
line 170: Assertion `(ssize_t)((ret)) == (ssize_t)((0))' failed.
got value: -1
should be: 0
Group "basic_getsockname": [FAILED]
Signed-off-by: chao an <anchao@xiaomi.com>
fix usrsock remote_disconnect fail:
nsh> usrsocktest
...
Testing group "remote_disconnect" =>
[TEST ASSERT FAILED!]
In function "receive":
line 497: Assertion `(ssize_t)((ret)) == (ssize_t)((0))' failed.
got value: -1
should be: 0
Group "remote_disconnect": [FAILED]
...
Reference:
RECV(2)
NAME
recv, recvfrom, recvmsg - receive a message from a socket
...
RETURN VALUE
...
When a stream socket peer has performed an orderly shutdown,
the return value will be 0 (the traditional "end-of-file" return).
Datagram sockets in various domains (e.g., the UNIX and Internet domains)
permit zero-length datagrams. When such a datagram is received, the return value is 0.
Signed-off-by: chao an <anchao@xiaomi.com>
fix usrsock getsockname fail
nsh> usrsocktest
...
Testing group "basic_getsockname" =>
[TEST ASSERT FAILED!]
In function "basic_getsockname_open":
line 170: Assertion `(ssize_t)((ret)) == (ssize_t)((0))' failed.
got value: -1
should be: 0
Group "basic_getsockname": [FAILED]
...
Reference:
GETSOCKNAME(2)
NAME
getsockname - get socket name
...
DESCRIPTION
...
The returned address is truncated if the buffer provided is too small;
in this case, addrlen will return a value greater than was supplied to the call.
Signed-off-by: chao an <anchao@xiaomi.com>
follow the below change:
-----------------------------------------------
commit 0334819742
Author: Xiang Xiao <xiaoxiang@xiaomi.com>
Date: Mon Aug 22 05:10:47 2022 +0800
net/usrsock: Change xid from uint64_t to uint32_t
by generating the new xid for each transaction
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Signed-off-by: chao an <anchao@xiaomi.com>
Do not use 'pvconn' argument to get the connection pointer since
pvconn is normally NULL for some events like NETDEV_DOWN.
Instead, the connection pointer can be reliably obtained from the
corresponding private pointer.
Signed-off-by: chao.an <anchao@xiaomi.com>
