Namely this changes HOSTOS for macOS from "Other" to "Darwin".
Also, suppress the following harmless messages during a "make":
(Missing redirect in tools/Makefile.host)
uname: illegal option -- o
usage: uname [-amnprsv]
Consider junk.c for example:
/****************************************************************************
* xx
****************************************************************************/
/****************************************************************************
* Private Types
****************************************************************************/
struct foo_s
{
int bar;
};
/****************************************************************************
* Public Functions
****************************************************************************/
int dofoo(int barin)
{
barout = barin;
return barout;
}
nxstyle not detects these problems:
$ tools/nxstyle.exe junk.c
junk.c:11:0: error: Blank line before opening left brace
junk.c:21:0: error: Blank line before opening left brace
This capability was erroneously removed by a previous commit. This setting is necessary when the C++ code generated by the compiler uses the new and delete operators provided in libs/libxx.
Here is an example of an error scenario where this capability is required:
1. CONFIG_CXX_NEWLONG=y in the defconfig file
2. This causes libs/libxx to to generate a delete operator of this form:
void delete(void*, unsigned long);
3. But the compiler expects to link with a delete operator of this form:
void delete(void*, unsigned int);
That results in a link-time failure and the ONLY solution for avoiding that link time failure (short of some complete redesign) is to have a control over the CONFIG_CXX_NEWLONG setting and make sture that it is always disabled for that toolchain.
Other toolchains will require that CONFIG_CXX_NEWLONG=y in all cases. This cannot be predicted because it is dependndent on the definitions provided by C libraries and header files that were build into binary toolchain.
CI should know the build status of testbuild.sh, so use -k make flag option as default
instead of -i ignore-error option. Then use fail to record build result. In addition,
refresh .config if toolchain updated.
Change-Id: I182c2b2db489e6ccb0a79fdc664072d19974c3ca
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
1.Scan the folder under nuttx/boards by prefix /
2.Skip the specified configuration by prefix -
Change-Id: Ibb67f2c6b96cd8e439d94bf71d098c1fd9e5a79d
Signed-off-by: Xiang Xiao <xiaoxiang@xiaomi.com>
Make sure kconfig-tweak disables CONFIG_TOOLCHAIN_WINDOWS under linux host, or it would break the build when using testbuild.sh for some configs.
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
1. Can't pipe uname stderr output to /dev/null. /dev/null does not exist in the Windows native enviornment.
2. Don't test if CONFIG_WINDOWS_NATIVE is defined. Tht leads to a "chicken'n'egg" problem: We need to build configure.c in order to configure the system, but we can't get the CONFIG_WINDOWS_NATIVE until after the system is configured.
3. The default name of the MinGW GCC compiler is mingw32-gcc.exe, not mingw-gcc.exe
Commit cf5d17f795 added logic to detect #define pre-processor definitions outside of the "Pre-processor Definitions" file section. That commit was verified against numerous .c source files. But not against any .h header files.
When run against a header file, that change causes a false alarm warning like:
file:line:pos: warning: #define outside of 'Pre-processor Definitions' section
That is caused the idempotence, guard definition that must appear in the header file BEFORE the first file section.
This commit adds logic to nxstyle to ignore pre-processor definitions in header files that occur before the first file section is encountered.
1. No .c file should include a "Public Types" section. Only a header file can define a public type. A .c file can only define a private type. Several files contained private type definitions. The section that they were defined in, however, was incorrectly named "Public Types." Those were easilty changed to "Private Types" which is what they are.
2. No .c file should include a "Public Function Prototypes" section. All global function prototypes should be provided via a header file and never declared with a .c file.
For No. 2, I corrected as many cases as was reasonable for the time that I had available. But there are still a dozen or so .c files that declare "Public Function Prototypes" within a .c file. This is bad programming style. These declarations should all be moved to the proper header files.
* tools/nxstyle: Added logic to parse section headers (like Included files, Pre-processor Definitions, etc.) and to assure that the section headers are correct for the file type. Also (1) verify that #include appears only in the 'Included Files' section and that (2) #define only occurs in the Pre-processor definition section.
Right now, there are several places where that rule is not followed. I think most of these are acceptable so these failures only generate warnings, not errors. The warning means that we need to go look at the offending #define or #include and decide if it is a acceptable usage or not.
the width of all block comments. Includes a check to assure that all block
comments use the same line width.
Verified against all .c files under /sched. There were a few cosmetic changes to the coding style under /sched to account to new, correctly detected problems in the /sched files.
* tools/nxstyle.c: Donot check unknown file extension files
nxstyle only support c soure file and header file check, donot check
other unknown file extension files.
* tools/checkpatch.sh: Add checkpatch.sh script based on nxstyle tool
Usage:
checkpatch.sh patch-list // default as patch list
checkpatch.sh -p patch-list
checkpatch.sh -c commit-list
checkpatch.sh -f file-list
checkpatch.sh - // read from stdin, which used by git pre-commit hook
And git pre-commit hook could use checkpatch.sh as below:
git diff --cached | ./tools/checkpatch.sh -
Usage: ./nxstyle -r start,count filename
nxstyle with -r option used to parse the range lines rather than the whole file.
Change-Id: I58ec56511fde14d6ec914400a7849e69960a3711
Signed-off-by: liuhaitao <liuhaitao@xiaomi.com>
* Simplify EINTR/ECANCEL error handling
1. Add semaphore uninterruptible wait function
2 .Replace semaphore wait loop with a single uninterruptible wait
3. Replace all sem_xxx to nxsem_xxx
* Unify the void cast usage
1. Remove void cast for function because many place ignore the returned value witout cast
2. Replace void cast for variable with UNUSED macro
Author: Gregory Nutt <gnutt@nuttx.org>
Run all .c and .h modified in PR through nxstyle.
Author: Masayuki Ishikawa <masayuki.ishikawa@gmail.com>
feature k210 (#16)
* arch: risc-v: Add support for __LP64__ to types.h
* arch: risc-v: Add support for RV64GC to common files
* arch: risc-v: Add support for Kendryte K210 processor (RV64GC)
* boards: risk-v: Add support for Sipeed Maix Bit with K210
* tools: Add support for Kendryte K210 processor
tools/nxstyle.c: Output compiler like error format. Added features
Uses getops to pars command line.
Supports
-s silence all output
-g provide a PASS fail message
* tools/README.txt: Update with new nxstyle options
1.merge CONFIG_GIT_REVISION_STR into CONFIG_VERSION_BUILD
2.merge gen_getrev.sh into version.sh
3.generate version number if needed
Here is a sample output:
nsh> uname -a
NuttX 8.2 59fd8e12d3-dirty Dec 12 2019 15:48:00 sim sim
nsh> cat /proc/version
NuttX version 8.2 59fd8e12d3-dirty Dec 12 2019 15:48:01
This change was motivated by the presence of the mkimage.sh file under tools. That is the tool that created the RRLOAD binary format. That bash script has a GPL license and, hence, may not be included in an Apache-licensed project.
HiFive1 with qemu
* arch: risc-v: Add include/.gitignore
* arch: risc-v: Add src/.gitignore
* arch: risc-v: Remove uncommon function prototypes in include/irq.h
* arch: risc-v: Add missing symbols and function prototypes in src/common/up_internal.h
* arch: risc-v: Add src/common/up_modifyreg32.c
* arch: risc-v: Enable include Make.dep in src/Makefile
* arch: risc-v: Fix stack coloration in common/up_createstack.c
* arch: risc-v: Add common/up_puts.c
* arch: risc-v: Add common/up_checkstack.c
* arch: rv32im: Move all logics from up_dumpstate.c to up_assert.c
This change is same as other architectures like arm/src/armv7-m
* arch: Select ARCH_HAVE_STACKCHECK for RISC-V in Kconfig
* arch: risc-v: Add SiFive fe310 processor
NOTE: Currently only tested with qemu
* boards: hifive1-revb: Add SiFive hifive1-revb board
NOTE: Currently only tested with qemu
* tools: Add fe310 processor to configure.sh
Approved-by: Alan Carvalho de Assis <acassis@gmail.com>
Approved-by: Gregory Nutt <gnutt@nuttx.org>
This change decouples that upper activity-based logic from the lower random walk logic and allows use of other upper state detection logic (such as a custom, application-specific state machine).
