Gregory Nutt
|
04f59f1761
|
Update README files
|
2014-08-12 10:01:12 -06:00 |
|
Gregory Nutt
|
cff5132179
|
SAMA5: Enable the 32.768 crystal if SCHED_TICKLESS is selected
|
2014-08-11 14:29:43 -06:00 |
|
Gregory Nutt
|
86ebe4725b
|
Updated README files
|
2014-08-10 20:02:45 -06:00 |
|
Gregory Nutt
|
3985dc9120
|
Cosmetic changed, updated README files, improved comments
|
2014-08-10 13:11:31 -06:00 |
|
Gregory Nutt
|
9b76a1b758
|
Update README files
|
2014-08-10 11:34:20 -06:00 |
|
Gregory Nutt
|
49deb059d4
|
Change CONFIG_MSEC_PER_TICK to CONFIG_USEC_PER_TICK. This gives more options for system timers in general, but more importantly, let's us realize higher resolution for the case of CONFIG_SCHED_TICKLESS=y -- of course, at the risk of some new interger overvflow problems
|
2014-08-07 13:42:47 -06:00 |
|
Gregory Nutt
|
7edc6a5666
|
Remove CONFIG_DISABLE_CLOCK
|
2014-08-07 12:35:24 -06:00 |
|
Gregory Nutt
|
6663d87227
|
Updated README
|
2014-08-06 12:30:35 -06:00 |
|
Gregory Nutt
|
a00d6c5d96
|
Update some defconfig files; enable network initialization thread
|
2014-08-06 12:22:51 -06:00 |
|
Gregory Nutt
|
3d4cc16245
|
NSH Networking: Also add an option to let platform-specific logic select the MAC address.
|
2014-08-06 10:12:10 -06:00 |
|
Gregory Nutt
|
19df85d31b
|
SAMA5: Some usage documents for media players
|
2014-08-04 19:23:20 -06:00 |
|
Gregory Nutt
|
8d13a7cfcd
|
WM8904: Update READMEs and defconfigs to last tested configuration
|
2014-08-04 15:36:16 -06:00 |
|
Gregory Nutt
|
971e14eeb1
|
WM8904 interface enable method now returns the previous interrupt state. Correct ordering of some WM8904: Need to provide MCLK before initializing the WM8904, not after
|
2014-08-04 14:56:20 -06:00 |
|
Gregory Nutt
|
930a986dc4
|
Correct the WM8904 interrupt configuration, active high level. Fix that and don't pull-up
|
2014-08-04 14:54:20 -06:00 |
|
Gregory Nutt
|
02e5721251
|
SAMA5 WM8904: Add option to use MAINCK as WM8904 MCLK
|
2014-08-03 11:01:02 -06:00 |
|
Gregory Nutt
|
1db7842e2e
|
SAMA5 PCK: Add Main clock as an option for the PCK clock source
|
2014-08-03 10:17:50 -06:00 |
|
Gregory Nutt
|
0b23fc2c86
|
WM8904: Ad the MCLK frequency to the interface definition. The WM8904 driver needs to know this frequency in order to configure the FLL to generate the correct bitrate
|
2014-08-01 18:37:56 -06:00 |
|
Gregory Nutt
|
b722e46427
|
SAMA5 WM8904: Fix errors in programmable clock output configuration
|
2014-08-01 15:18:58 -06:00 |
|
Gregory Nutt
|
2e77455c6f
|
SAMA5 SSC: Start Delay is now configurable
|
2014-08-01 14:10:37 -06:00 |
|
Gregory Nutt
|
67792ef05b
|
SAMA5 SSC: Frame Synch Delay is now configurable
|
2014-08-01 12:25:31 -06:00 |
|
Gregory Nutt
|
0fb3f7803c
|
SAMA5D3X-EK: Add support for the WM8904 audio CODEC
|
2014-07-31 11:14:57 -06:00 |
|
Gregory Nutt
|
afff17a8ee
|
Add short document for running the NxWM demo
|
2014-07-31 08:18:07 -06:00 |
|
Gregory Nutt
|
928adfcc1a
|
SAMA5D4-EK NxWM: The USB keyboard is now the default input device
|
2014-07-30 17:37:02 -06:00 |
|
Gregory Nutt
|
7e4e5ee543
|
dd support for a USB keyboard as the NxConsole and text widget input. Not fully functional as of this initial check-in. Basic functionality is there, but there are conditions were the keyboard gets lost.
|
2014-07-30 17:01:51 -06:00 |
|
Gregory Nutt
|
40e27add0b
|
Costmetic: Update TODO list, README files, refreshed configuration, updated comments
|
2014-07-30 14:26:50 -06:00 |
|
Gregory Nutt
|
2b0c56a31d
|
SAMA5 HSMCI: e-enable TX DMA and verify that DMA writes to the SD card are functional. They are so now TX DMA is re-enabled in the driver. This might affect the SAMA5D3 platforms where the TX DMA problem was found. The SAMA4D3 and 4 use the same HSMCI driver. Much has change since then and it is not surprising that DMA is now functional. However, the has not be re-verified on the SAMA5D3 which has a different DMA controller.
|
2014-07-30 11:20:06 -06:00 |
|
Gregory Nutt
|
df57bd319d
|
Updated README file, cosmetic changes to comments and debug output
|
2014-07-30 10:19:09 -06:00 |
|
Gregory Nutt
|
812db2e5ae
|
Update TODO listi and README
|
2014-07-29 20:02:34 -06:00 |
|
Gregory Nutt
|
9652872800
|
The SAMA5D4-EK NSH and NxWM configurations now have the auto-mounter configured to automatically mount the FAT file system on HSMCI0 at /mnt/sdcard
|
2014-07-29 16:36:15 -06:00 |
|
Gregory Nutt
|
47aa0e0baf
|
Cosmetic updates to comments and README files and some naming
|
2014-07-29 16:35:47 -06:00 |
|
Gregory Nutt
|
9414e97f01
|
Minor warning/latent bug clean-up of auto-mounter logic
|
2014-07-29 16:35:17 -06:00 |
|
Gregory Nutt
|
42b28ba383
|
SAMA5D4: Add auto-mounter support for HSMCI0
|
2014-07-29 15:34:31 -06:00 |
|
Gregory Nutt
|
d7432c4b07
|
Update ChangeLog
|
2014-07-29 12:52:21 -06:00 |
|
Gregory Nutt
|
17a9b2b4be
|
SAMA5: Poll USB keyboard at a higher rate for better response
|
2014-07-29 08:57:35 -06:00 |
|
Gregory Nutt
|
ff0de0d603
|
SAMA5D-EK: Correct system timer frequency. Input clock is MCK/2, not MCK
|
2014-07-29 07:12:36 -06:00 |
|
Gregory Nutt
|
2f3e83e793
|
Cosmetic changes to comments
|
2014-07-29 07:11:16 -06:00 |
|
Gregory Nutt
|
00c7b4765f
|
SAMA5D4-EK: Disable PMIC workaround... it does not work
|
2014-07-28 17:48:55 -06:00 |
|
Gregory Nutt
|
f632aef535
|
Fixes to last SAMA5 PMIC checkin
|
2014-07-28 17:09:37 -06:00 |
|
Gregory Nutt
|
5c5477b981
|
SAMA5D4-EK: Add logic to disable the faulty PMIC. This must be done with JP23 open. It is perfomed only from the DRAMBOOT loader
|
2014-07-28 16:34:19 -06:00 |
|
Gregory Nutt
|
8e20aae28f
|
Change naming from cp_XYZ_cache() to arch_XYP_cache() so that all cache operations will pick up L2 support if it is enabled
|
2014-07-26 18:47:33 -06:00 |
|
Gregory Nutt
|
e436b0bc96
|
Updated README
|
2014-07-25 10:03:01 -06:00 |
|
Gregory Nutt
|
33c49e70c6
|
AMA5D4-EK NxWM: Configuration refreshed
|
2014-07-24 15:06:19 -06:00 |
|
Gregory Nutt
|
bc6b713a37
|
NxWM: Beginning integration of NxPlayer into Nxwm::MediaPlayer. Gets handle, sets device, and releases handle. Lots more to be done
|
2014-07-23 18:19:00 -06:00 |
|
Gregory Nutt
|
d3eb13ed66
|
SAMA5D4-EK NSH: Enable the command line media player in the NSH configuration as well (still does not work, however).
|
2014-07-23 15:33:54 -06:00 |
|
Gregory Nutt
|
3e49c4c510
|
SAMA5D4 NxWM: Configuration now has the audio subsystem and the NxPlayer enabled
|
2014-07-23 15:20:54 -06:00 |
|
Gregory Nutt
|
02ebeddeb0
|
Audio: Add a NULL audio device that can be used to simply unit-level testing of audio decoders
|
2014-07-23 10:12:32 -06:00 |
|
Gregory Nutt
|
8edc57137c
|
SAMA5D3/4: All configurations. I suspect a MMC/SD multi-block DMA transfer issue. So for name, this feature is disabled in all configurations
|
2014-07-23 07:58:10 -06:00 |
|
Gregory Nutt
|
e20182c2fb
|
Rename pcm_decode.h to pcm.h since it will hold more than just decoding definitions. Fix some porting errors like idbg should auddbg, etc. Add wav file header and a few low-level wav utilities.
|
2014-07-22 15:54:56 -06:00 |
|
Gregory Nutt
|
2ad6e4452b
|
Add new framework for the PCM decoder. It is now a 'front end' for lower-level drivers like the WM8904 that performs the PCM decoding from end
|
2014-07-22 11:54:13 -06:00 |
|
Gregory Nutt
|
36ae0dfa42
|
Update README
|
2014-07-22 09:25:38 -06:00 |
|