Xiang Xiao
543f4ed8ec
arch/ all assertion functions: up_assert move the register dump to first make the more important info first
2018-11-11 12:53:59 -06:00
Xiang Xiao
dfe788be25
arch/ all assertion functinos: up_stackdump dump the full stack if stack overflow the stack info is very useful to find the backtrace
2018-11-11 12:52:36 -06:00
Xiang Xiao
e4106a3744
arch/ assertions files: up_registerdump capture the general register if not yet saved and up_saveusercontext is implemented, the register dump is very useful to find the cause of failure.
2018-11-11 12:50:50 -06:00
Gregory Nutt
2b3ec4172d
arch/: Add 'BOARD_ASSERT_RESET_VALUE' in config/Kconfig and replace reboot status '0' to 'CONFIG_BOARD_ASSERT_RESET_VALUE'.
2018-11-10 14:06:46 -06:00
Gregory Nutt
6d93658ff8
Add new configuratin CONFIG_NET_MCASTGROUP. This option is selected automatically if either CONFIG_NET_IGMP or CONFIG_NET_MLD are selected. Most conditional logic based on CONFIG_NET_IGMP replaced with conditioning on CONFIG_NET_MCASTGROUP.
2018-10-31 15:03:51 -06:00
Gregory Nutt
9bc951a335
Rename devif_loopback_out to devi_loopback
2018-08-25 08:33:21 -06:00
dongjianli
19e16cb1ba
up_internal.h: Define out the prototype for up_netinitialize() if CONFIG_NETDEV_LATEINIT is also defined
2018-08-24 14:50:45 -06:00
Xiang Xiao
0074afa0ac
net/netdev: add devif_loopback_out() to check the loopback case where a packet is being sent to itself. Modify the net driver to call this function in this case. This function will simply re-inject the packet back into the network and the network driver will not put anything on the wire.
2018-08-24 09:21:33 -06:00
Xiang Xiao
e1202d2ed3
Replace all ASSERT with DEBUGASSERT to save the code space
2018-08-24 06:58:30 -06:00
Xiang Xiao
467d2a58ea
Replace non critical PANIC with DEBUGPANIC to save the code space
2018-08-24 06:21:15 -06:00
xuanlin
2c93467436
pthreads: Add support static pthread stack. Add standard pthread_attr_setstack() and pthread_attr_getstack(). In all cases where the stack is released, add check to see which allocator must be used to free the stack: The user or the kernel allocator.
2018-08-23 09:49:20 -06:00
Xiang Xiao
a465b6f0d4
configs/: Change CONFIG_BOARD_RESET_ON_CRASH to CONFIG_BOARD_RESET_ON_ASSERT, arch/: Implement call to board_reset() if in all implementations of up_assert() when CONFIG_BOARD_RESET_ON_ASSERT=y.
2018-08-22 17:04:39 -06:00
Gregory Nutt
cba0ddad0e
arch/: Most some common debug configuration settings out of header files and into Kconfig files where they belong.
2018-08-19 14:55:49 -06:00
Gregory Nutt
c790450ba2
Remove CONFIG_ARCH_CALIBRATION. It is awkward to use and no longer necessary now that we have apps/examples/calib_udelay.
2018-08-19 10:06:36 -06:00
Gregory Nutt
22cd0d47fa
This commit attempts remove some long standard confusion in naming and some actual problems that result from the naming confusion. The basic problem is the standard MTU does not include the size of the Ethernet header. For clarity, I changed the naming of most things called MTU to PKTSIZE. For example, CONFIG_NET_ETH_MTU is now CONFIG_NET_ETH_PKTSIZE.
...
This makes the user interface a little hostile. People thing of an MTU of 1500 bytes, but the corresponding packet is really 1514 bytes (including the 14 byte Ethernet header). A more friendly solution would configure the MTU (as before), but then derive the packet buffer size by adding the MAC header length. Instead, we define the packet buffer size then derive the MTU.
The MTU is not common currency in networking. On the wire, the only real issue is the MSS which is derived from MTU by subtracting the IP header and TCP header sizes (for the case of TCP). Now it is derived for the PKTSIZE by subtracting the IP header, the TCP header, and the MAC header sizes. So we should be all good and without the recurring 14 byte error in MTU's and MSS's.
Squashed commit of the following:
Trivial update to fix some spacing issues.
net/: Rename several macros containing _MTU to _PKTSIZE.
net/: Rename CONFIG_NET_SLIP_MTU to CONFIG_NET_SLIP_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_6LOWPAN_MTU to CONFIG_NET_6LOWPAN_PKTSIZE and similarly for CONFIG_NET_TUN_MTU. These are not the MTU which does not include the size of the link layer header. These are the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename CONFIG_NET_ETH_MTU to CONFIG_NET_ETH_PKTSIZE. This is not the MTU which does not include the size of the link layer header. This is the full size of the packet buffer memory (minus any GUARD bytes).
net/: Rename the file d_mtu in the network driver structure to d_pktsize. That value saved there is not the MTU. The packetsize is the memory large enough to hold the maximum packet PLUS the size of the link layer header. The MTU does not include the link layer header.
2018-07-04 14:10:40 -06:00
Gregory Nutt
a94e3284b3
syslog: Enable is partial, crippled version of syslog_flush(); arch/: Call syslog_flush() from assertion handling logic.
2018-06-07 16:29:16 -06:00
Gregory Nutt
f2a89813f2
Build system: Remove fixed lib/ subdirectory and its content. Replace with new directory called staging/ that is created dynamically when building and removed when 'make clean' is done. This both improves the name and eliminates a garbage directory from the repository.
2018-05-29 11:36:21 -06:00
Gregory Nutt
b54ffe858a
Standardization of some function headers.
2018-03-13 09:52:27 -06:00
Gregory Nutt
de6b13b3ab
Per OpenGroup.org, syslog -- and, hence, nonstandard vsyslog, and debug wrappers -- does not return a value. Rename _vsyslog to nx_vsyslog. Use internal nx_vsyslog in the few cases where a return value is required.
2018-03-04 08:07:07 -06:00
Gregory Nutt
7cf88d7dbd
Make sure that labeling is used consistently in all function headers.
2018-02-01 10:00:02 -06:00
Gregory Nutt
a8b6be4aaf
The existence of the network driver ioctl() method should depend on CONFIG_NETDEV_IOCTL rather than CONFIG_NETDEV_PHY_IOCTL. The former enables the method, the later enables a subset of possible driver IOCTLs. This change should be basically a no-operation. The affected ioctl methods only support those subset of driver IOCTLs selected by CONFIG_NETDEV_PHY_IOCTL and the network logic will tolerate a nul ioctl method.
2018-01-22 08:17:45 -06:00
Gregory Nutt
2043e1a114
IOBs: Move from driver/iob to a better location in mm/iob
2017-05-09 07:35:30 -06:00
Gregory Nutt
b6b16bf4da
Fix forward references that were mangled in last large changes.
2017-04-29 06:59:35 -06:00
Sebastien Lorquet
c70d797229
misc archs
2017-04-28 18:24:06 +02:00
Gregory Nutt
a55e937643
Correct mispelling
2017-04-22 17:03:34 -06:00
Gregory Nutt
79256573e1
net: network drver now retains Ethernet MAC address in a union so that other link layer addresses may be used in a MULTILINK environment.
2017-04-22 11:10:30 -06:00
Gregory Nutt
bfb93338f6
Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled.
2017-04-20 16:08:49 -06:00
Gregory Nutt
a581e9206d
Convert remaining serial drivers to use use irq_attach.
2017-02-27 10:27:14 -06:00
Mark Schulte
b3222bbc8a
irq_dispatch: Add argument pointer to irq_dispatch
...
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
2017-02-27 06:27:56 -06:00
Gregory Nutt
1d290c2b37
setvbuf: Add support for disabling I/O buffering. Initially cut; untested.
2017-02-09 09:24:44 -06:00
Gregory Nutt
62a1f6f110
up_timer_initialize() is named incorrectly. The prefix should be the architecture name, not up_ since it is private to the architecture. up_timerisr() is similarly misnamed and should also be private since it is used only with the xyz_timerisr.c files. Also updat TODO list.
2017-02-07 10:35:04 -06:00
Gregory Nutt
3ed091376c
In all implementations of _exit(), use enter_critical_section() vs. disabling local interrupts.
2017-01-13 11:08:24 -06:00
Gregory Nutt
934aded293
arch/: Adapt all Ethernet drivers to work as though CONFIG_NET_MULTIBUFFER were set. Remove all references to CONFIG_NET_MULTIBUFFER
2016-11-29 16:06:48 -06:00
Paul A. Patience
912fe06a86
Add architecture-specific inttypes.h
2016-10-27 16:01:38 -04:00
Gregory Nutt
2b23d4b0e7
Correct some comments
2016-08-06 16:25:02 -06:00
Gregory Nutt
e77872057d
Fix up a few remaining incorrect CONFIG_GPIO_IRQ
2016-07-22 15:01:00 -06:00
Gregory Nutt
5a9519d636
Rename HCS12 version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ
2016-07-22 14:53:17 -06:00
Gregory Nutt
c00ad93165
Rename HC version of CONFIG_GPIO_IRQ to CONFIG_HCS12_GPIOIRQ
2016-07-22 14:46:54 -06:00
Gregory Nutt
4b4dbc79a2
Move driver related prototypes out of include/nuttx/fs/fs.h and into new include/drivers/drivers.h
2016-07-20 13:15:37 -06:00
Gregory Nutt
d5388eca05
devrandom_register() must be called before devurandom_register()
2016-07-18 11:24:04 -06:00
Gregory Nutt
1660329d06
Rename up_rnginitialize to devrandom_register
2016-07-18 10:55:37 -06:00
David Alessio
6cefbc0c3f
This change provides an option to add /dev/urandom to all architectures. The pseudo-random algorithm I choose strikes an arguably-good balance between being "random" and small/fast enough for 8/16 bit MCUs. It’s the well-documented xorshift128 algorithm. It has an internal state of 128 bits that can be [re-]seeded with a write.
2016-07-17 06:42:26 -06:00
Gregory Nutt
e7f0a56498
Correct some comments
2016-07-15 13:13:53 -06:00
Gregory Nutt
7b298a828d
up_pminitialize() needs to be called from instances of up_initialize()
2016-07-15 13:11:28 -06:00
Gregory Nutt
d3b3c71d97
All architectures: Add logic to automatically register /dev/ptmx a boot time
2016-07-15 11:54:41 -06:00
Gregory Nutt
5118264e6c
Rename CONFIG_SYSLOG_CONSOLE to CONFIG_CONSOLE_SYSLOG
2016-06-21 09:35:51 -06:00
Gregory Nutt
62d8f839c7
SYSLOG: Now a two phase initialization. Some SYSLOG channels cannot be initialized until later in the bringup
2016-06-21 07:52:24 -06:00
Gregory Nutt
7f16548f57
Replaces last three commits. Does the same thing, but does it in a way that does not change the usage model.
2016-06-21 05:26:08 -06:00
Gregory Nutt
c05da80a27
Eliminate a warning
2016-06-20 22:54:58 -06:00
Gregory Nutt
505ca542e8
Remove some last traces of lowvsyslog that were missed; Add a SYSLOG emergency channel for handling assertion output more cleanly
2016-06-20 16:11:50 -06:00
