Gregory Nutt
|
057b438499
|
samv71-xult/mrf24j40-starhub: Disabled CONFIG_BOARD_INITIALIZE; Correct MRF24J40 interrupt edge.
|
2017-07-03 06:56:47 -06:00 |
|
Gregory Nutt
|
acb0dcecac
|
samv71-xult: Fix a typo in MRF24J40 initialization.
|
2017-07-02 18:36:55 -06:00 |
|
Gregory Nutt
|
56801c3389
|
samv71-xult: Fix SP0 vs. TWHS0 in mrf24j40-starhub/defconfig; fix copy-paste errors in SPI initialization logic.
|
2017-07-02 18:33:31 -06:00 |
|
Jan Pobrislo
|
a8f43e1216
|
stm32f4 discovery: Add logic to register the button driver and the user led driver if so configured
|
2017-07-02 16:40:11 -06:00 |
|
Gregory Nutt
|
41d4958a77
|
Add missing MRF24J40 bring-up logic
|
2017-07-02 15:01:11 -06:00 |
|
Gregory Nutt
|
634b13c143
|
samv71-xult/mrf24j40-starhub: Tweaks to defconfig
|
2017-07-02 14:25:51 -06:00 |
|
Gregory Nutt
|
7d7fd9112d
|
samv71-xult/mrf24j40-starhub: Put the serial console on UART3, i.e., on a Arduino serial shield.
|
2017-07-02 13:06:23 -06:00 |
|
Gregory Nutt
|
09ab651e02
|
samv71-xult: Add support for the MRF24J40 radio and create a mrf24j40-starhub configuration. A few fixes to IPv6 and 6LoWPAN were required to have 6LoWPAN and Ethernet coexisting. Untested and expect some complexity in the bring-up.
|
2017-07-02 11:04:57 -06:00 |
|
Gregory Nutt
|
0b4a9a0b3d
|
same570-xplained: Refresh configurations.
|
2017-07-01 17:24:40 -06:00 |
|
Gregory Nutt
|
ae1771454a
|
6LoWPAN: TCP send logic was returning a failure in one case when, in fact, the send was successful.
|
2017-06-30 16:07:51 -06:00 |
|
Gregory Nutt
|
af8c5c86f3
|
6LowPan: Change how the destination node address is handled in the start endpoint configuration. When the star endpoint sent the IPv6 destination address, the HC06 compression logic elided the address -- meaning that it could be reconstructed by the recipient based on the receiver's assigned short address. However, when intercepted by the hub, the uncompressed address does not know the short address of the recipient and instead uses the short address of the hub. This means two things: (1) it looks like the hub address is the destination address, and (2) the uncompressed UDP packet has a bad checksum. This change assures that the destination IPv6 address is not elided in the case of the star endpoint configuration.
|
2017-06-30 09:32:17 -06:00 |
|
Gregory Nutt
|
ad3ea72ff5
|
Update a README; refresh some configurations.
|
2017-06-29 10:55:01 -06:00 |
|
Gregory Nutt
|
6d8df90b79
|
Clicker2-STM32 + net/: Add configurations to support the endpoint and hub roles in a star topology. Fix various things that broke when IPv6 forwarding was enabled.
|
2017-06-29 08:16:46 -06:00 |
|
Gregory Nutt
|
a469f0ef04
|
Documentation/: Remove dangling space at the end of lines.
|
2017-06-28 13:27:10 -06:00 |
|
Gregory Nutt
|
c67b807f43
|
configs/: Remove dangling spaces at the end of lines in *.c and *.h files.
|
2017-06-28 13:21:20 -06:00 |
|
Gregory Nutt
|
44545781e5
|
configs/: Remove dangline space at the end of lines in .txt files.
|
2017-06-28 13:18:41 -06:00 |
|
Gregory Nutt
|
76644b6ead
|
Update a README.
|
2017-06-27 09:53:55 -06:00 |
|
Gregory Nutt
|
70cefcf551
|
Clicker2-STM32: Add support for the Telnet client to the mrf24j40-6lowpan configuration. Useless at the moment because the NuttX telnet daemon does not yet support IPv6.
|
2017-06-27 07:44:41 -06:00 |
|
Gregory Nutt
|
8cb4636bb1
|
Update README
|
2017-06-26 11:54:43 -06:00 |
|
Gregory Nutt
|
aa1708e7c0
|
6LoWPAN: Update README; fix duplicate and bad memcpy in loopback driver.
|
2017-06-26 10:53:57 -06:00 |
|
Gregory Nutt
|
249ab6eb18
|
6LoWPAN: Eliminate a global variable.
|
2017-06-26 10:49:02 -06:00 |
|
Anthony Merlino
|
da8afe9d9e
|
ieee802154: Finishes transmission of beacon frames, and performing a passive scan
|
2017-06-25 18:08:00 -04:00 |
|
Gregory Nutt
|
5a8668b362
|
6LoWPAN TCP: Fix more ACK handling, fix some callback flag settings. Now the TCP test appears fully functional on 6LoWPAN.
|
2017-06-25 13:00:42 -06:00 |
|
Gregory Nutt
|
ff08f799ca
|
IEEE802.15.4: Update RX statistics in network driver. Update README files.
|
2017-06-25 11:18:27 -06:00 |
|
Gregory Nutt
|
74c97f7e7f
|
6LoWPAN: Various fixes for a clean build if either TCP or UDP are disabled. Given the current state of TCP, it is recommended that you disable TCP.
|
2017-06-24 16:53:00 -06:00 |
|
Gregory Nutt
|
96af668ab8
|
6LoWPAN: Handle case where the local address is zero (listen socket)
|
2017-06-24 11:57:59 -06:00 |
|
Gregory Nutt
|
2fb938202c
|
6LoWPAN: TCP logic was not obeying MTU packet size limitations. Other TCP-specific issues also fixed. There remains a major outstanding issue with ACK handling.
|
2017-06-24 09:48:41 -06:00 |
|
Gregory Nutt
|
fa1d95dee2
|
configs/sim/sixlowpan: Disable I2C tool. Not so useful in a simulation.
|
2017-06-23 19:12:52 -06:00 |
|
Gregory Nutt
|
f0cdb0e6b4
|
clicker2-stm32/mrg24j40-6lowpan: Add apps/examples/nettest. Refresh all configurations that enable the nettest.
|
2017-06-23 18:11:15 -06:00 |
|
Gregory Nutt
|
f5856282f5
|
defconfigs: examples/nettest configuration name change
|
2017-06-23 15:50:02 -06:00 |
|
Gregory Nutt
|
ee74a76eca
|
clicker2-stm: Fix naming of a configuration setting
|
2017-06-23 12:24:31 -06:00 |
|
Gregory Nutt
|
328a464f99
|
6LoWPAN: Fix a typo in an index that prevented use with HC1 and extended addresses.
|
2017-06-23 10:08:03 -06:00 |
|
Gregory Nutt
|
1a46ea644d
|
6LoWPAN: Add missing IPv6 address creation to HC1 decode logic.
|
2017-06-23 09:45:09 -06:00 |
|
Gregory Nutt
|
4a517ad48d
|
6LoWPAN: Just adds more debug output
|
2017-06-22 15:19:18 -06:00 |
|
Gregory Nutt
|
bc8ad02ee5
|
6LoWPAN: Various fixes from retesting on simulator with short addressing.
|
2017-06-22 11:42:52 -06:00 |
|
Gregory Nutt
|
b49c52226e
|
Update README
|
2017-06-21 18:05:36 -06:00 |
|
Gregory Nutt
|
a12ff2836c
|
Fixes from review of last PR
|
2017-06-21 10:15:23 -06:00 |
|
Gregory Nutt
|
a3bb6fc139
|
clicker2-stm32/mrf24j40-6lowpan: Network now runs on LP work queue.
|
2017-06-21 08:20:51 -06:00 |
|
Gregory Nutt
|
e7e8228b00
|
Missing option to select CONFIG_MAC802154_NNOTIF in Kconfig
|
2017-06-21 07:35:09 -06:00 |
|
Gregory Nutt
|
d9f549121c
|
ieee802154_req_data: Don't modify the IOB until we are certain that no EINTR errors will occur. Otherwise, the retry will fail
|
2017-06-20 14:27:22 -06:00 |
|
Gregory Nutt
|
192bacbd7f
|
ieee802154 network driver now retries if ieee802154_req_data() returns EINTR. In clicker2-stm32 6LoWPAN configuration, increased the number of TX descriptors to match then number of IOBs.
|
2017-06-20 13:30:17 -06:00 |
|
Gregory Nutt
|
a82ab4b729
|
mac802154_req_data() can return without releasing the exclsem
|
2017-06-20 11:23:31 -06:00 |
|
Gregory Nutt
|
6dafb4f532
|
6LoWPAN: Add debug statements; Update configuration, need to specific 6LoWPAN compatible port numbers.
|
2017-06-20 10:37:32 -06:00 |
|
Gregory Nutt
|
68a2b84277
|
Update a README
|
2017-06-19 16:01:35 -06:00 |
|
Gregory Nutt
|
c5ae864624
|
/configs/clicker2-stm32/mrf24j40-6lowpan: Enables both client and server UDP tests on the target; Update a README file.
|
2017-06-19 13:28:48 -06:00 |
|
Gregory Nutt
|
476ca8238b
|
Update TODO list and some defconfigs.
|
2017-06-19 10:56:34 -06:00 |
|
Gregory Nutt
|
94b607bda0
|
Update TODO, enable UDP example in clicker1-stm32/mrf24j40-6lowpan example, make sure that CONFIG_EXAMPLES_UDP_NETINIT is set in all other examples/udp configurations.
|
2017-06-19 09:59:10 -06:00 |
|
Gregory Nutt
|
cfea8adacb
|
L should be capitalized in 6LoWPAN
|
2017-06-18 16:00:08 -06:00 |
|
Gregory Nutt
|
84a75996fb
|
IEEE 802.15.4 Network Driver: Add logic to setup the network mask, update the MAC-based IPv6 addressing when the network is brought up. The idea is that addressing changes are supposed to occur only while the network is down but won't take effect until the network is up again.
|
2017-06-18 15:26:56 -06:00 |
|
Gregory Nutt
|
50df37931d
|
ieee802.15.4: Missing one name change
|
2017-06-18 11:29:09 -06:00 |
|