Comment for pcf8574_register_update() function was incorrect as it was
probably copied from different driver function.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
boards/arm/cxd56xx/drivers/sensors/bmi160_scu.c: fix incorrect comments to the Right of Statements.
drivers/sensors/ak09912.c: fix incorrect function description ak09912_putreg8 and ak09912_getreg8
W25QxxxJV NOR memories are backward compatible with older Winbond´s
generations and thus can also be supported here. This essentially brings
the support for generic SPI to W25QxxxJV memories as w25qxxxjv.c file only
supports QSPI communication.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
wdog_notifier() will be called in _assert to keep the crash scene
as mush as possible, which is useful for debug.
But once disable the watchdog, the hardware watchdog can not reboot
the system too. If a crash happened in the _assert (e.g. the tcb sp
has been corrupted, system will crash again in tack stack dump),
system will crashing forever and can not reboot.
So add a config to disable this feature by default and can be enable
if anyone need it.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
When the value that is out of range is specified in ioctl(VIDIOC_S_CTRL) and
ioctl(VIDIOC_S_EXT_CTRLS), returned value should be not EINVAL but ERANGE.
video driver does not support flags member of ioctl(VIDIOC_QUERYCTRL)
and ioctl(VIDIOC_QUERY_EXT_CTRL).
But, ioctl returns with the flags member that has the garbage value.
Add initialization of flags member to avoid return of the garbage value.
drivers/sensors/bme680.c: The bme680 driver
sensor.h: Added new type of sensor (Gas) to be used for retrieving the bme680 data
esp32/common/src/esp32_bme680.c: bme680 support on esp32
esp32/esp32-sparrow_kit/esp32_bringup.c: added support for the bme680
esp32/esp32-sparrow-kit/configs/nsh/defconfig: fixed defconfig ci problem
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
esp32-sparrow-kit: Fixed defconfig
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Code is now C89 compatible
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Reused already defined sensor data structs by registering every sub-sensor separately
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
Implemented suggestions
Signed-off-by: simonatoaca <simona.alexandra2000@gmail.com>
1.support to use dd commond to burn romfs image to nand flash
2.support bare-write nand flash device without file system
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
Some hardware needs to config this delay to write one data block, because
the hardware needs more time to wear leveling and bad block manage.
Signed-off-by: dongjiuzhu1 <dongjiuzhu1@xiaomi.com>
The implementation of up_perf_*() is in a different static library in nuttx:
Hardware: libarch.a
Software: libdrivers.a (weak function)
Since functions with weak attributes cannot be correctly replaced in multiple static libraries,
this PR will use macros to replace whether the arch supports hardware perf events
Signed-off-by: chao an <anchao@xiaomi.com>
- considering simplicity and design assumption, the reset function must work without flaw.
If it fails, there is no way to recover but to reset again. so checking return status does not
bring additional benefit
- There is unnecessary switch inside switch which is making code not too readable
Signed-off-by: mks2183 <manishsharma3134@gmail.com>
nuttx/drivers/sensors/wtgahrs2.c: In function ‘wtgahrs2_initialize’:
nuttx/drivers/sensors/wtgahrs2.c:545:22: warning: ‘%lx’ directive output may be truncated writing between 1 and 16 bytes into a region of size 14 [-Wformat-truncation=]
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~
nuttx/drivers/sensors/wtgahrs2.c:545:25: note: format string is defined here
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
nuttx/drivers/sensors/wtgahrs2.c:545:22: note: directive argument in the range [1, 18446744073709551615]
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~
nuttx/drivers/sensors/wtgahrs2.c:545:3: note: ‘snprintf’ output between 4 and 19 bytes into a destination of size 16
545 | snprintf(arg1, 16, "0x%" PRIxPTR, (uintptr_t)rtdata);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: chao an <anchao@xiaomi.com>
3 wire interface for ST7789 LCD controller does not use CMD/DATA pin to
specify whether data or command is send but uses 9th bit of SPI transfer.
This commit adds support for 3 wire interface to ST7789 controller.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
