sergiotarxz/nuttx
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
30,933 Commits 1 Branch 0 Tags 291 MiB
05f2e9cdc1
Commit Graph

159 Commits

Author SHA1 Message Date
Anthony Merlino
22754053e8 Merged in merlin17/nuttx/xbee (pull request #484) 
drivers/wireless:  Adds XBee S2C (802.15.4 firmware) support. XBee driver emulates mac802154 interface

* drivers/wireless/xbee: Adds xbee_netdev. Very similar to mac802154_netdev

* configs/same70-xplained: Starts adding support for XBee radio

* drivers/wireless/ieee802154/xbee: More structuring of XBee driver

* drivers/wireless/ieee802154/xbee: More Xbee work. Starts adding support on Clicker2

* drivers/wireless/ieee802154/xbee: More XBee MAC code

* configs/clicker2-stm32: More work to add XBee radio support

* drivers/wireless/ieee802154/xbee: Most of driver is now structured. No build errors

* configs/clicker2-stm32: Adjustments to XBee click module support

* drivers/xbee: Changes md_ prefix to xd_ prefix for xbeenet_driver_s fields

* drivers/xbee: XBee network device now passes MAC events via IOCTL

* drivers/xbee: Support querying device for parameters, setting parameters, and structures association/startpan logic

* configs/clicker2-stm32: Fixes Xbee lower half ATTN poll logic

* drivers/xbee: Removes dependce on CONFIG_IEEE802154_NETDEV

* drivers/xbee: Supports MAC RESET.request primitive

* drivers/xbee: Exposes generic AT query to the rest of driver

* drivers/xbee: Sets local values when writing setting change to Xbee device

* drivers/xbee: Finish association logic

* drivers/xbee: Adds xbee_get_mhrlen( ) allocating enough space for API frame header to frame

* drivers/xbee: Finishes transmit/receive logic

* drivers/xbee: Fixes xbee_netdev to match logic in mac802154_netdev.c

* drivers/xbee: Rearranges logic to prevent a loop condition where recursion could potentially occur to the point of deadlocking the system

Approved-by: Gregory Nutt <gnutt@nuttx.org>
 2017-09-15 14:37:55 +00:00
Gregory Nutt
88a87f8e3f 6LoWPAN: The original, Contiki-based design used only a single buffer for reassemblying larger packets. This could be a problem issue for hub configurations which really need the capability concurrently reassemble multiple incoming streams concurrently. These was also a design issue in that the reassembly buffer could be corrupted by outgoing packets. The design was extended to support multiple reassembly buffers, each associated with the reassembly tag and source address. This assures that there can be be no corruption of the reassembly once it has started. 2017-08-26 10:00:47 -06:00
Gregory Nutt
a668806b94 Update some README files; Plus minor simplification to a preceding change. 2017-08-24 06:44:35 -06:00
Gregory Nutt
394a340da0 Networking: Compile error if Unix domain sockets selected; Update SAME70-xplained README me. 2017-08-23 15:04:40 -06:00
Gregory Nutt
1972fd827f Another trivial update to the same README file. 2017-08-22 12:39:08 -06:00
Gregory Nutt
3f44666e16 Update a README file. 2017-08-22 12:35:58 -06:00
Gregory Nutt
17ca117104 Update README 2017-08-21 15:23:17 -06:00
Gregory Nutt
b52034ffd2 PF_IEEE802154: With this commit PF_IEEE802154 address family is basically functional. More testing is needed, of course. 2017-08-19 18:50:50 -06:00
Gregory Nutt
fe7933ce0b Add include/net/ieee802154.h 2017-08-17 15:25:52 -06:00
Gregory Nutt
0cf5bede5b Disable the RAMLOG, log directly to console in mrf23j40-starhub configuration. 2017-08-17 09:14:04 -06:00
Gregory Nutt
adef84b68a Minor updates to MRF24J40 on SAME70 Xplained; Updated to README files. 2017-08-16 12:52:58 -06:00
Gregory Nutt
06473e89de Update MRF24J40 starhub configuration for the SAME70 Xplained. 2017-08-16 09:39:25 -06:00
Gregory Nutt
873de7b480 configs/*/README.txt: Update to the new URL for obtaining the ARM toolchain. 2017-08-13 07:18:19 -06:00
Gregory Nutt
316fde135c Build System: It is no longer necessary to have a unique Make.defs file for each configuration. A board may share a common Make.defs file in the scripts directory. 2017-07-10 17:00:54 -06:00
Gregory Nutt
422888733b More conversions of defconfig files to compressed format. Not yet finished. 2017-07-09 19:25:19 -06:00
Gregory Nutt
31f832d8c5 IP forwarding: Flesh out TCP, UDP, and ICMPv6 packet forwarding logic. 2017-07-05 11:01:16 -06:00
Gregory Nutt
f07420dedf SAME70-Xplained: Add MRF24J40 support. 2017-07-04 14:31:26 -06:00
Gregory Nutt
0b4a9a0b3d same570-xplained: Refresh configurations. 2017-07-01 17:24:40 -06:00
Gregory Nutt
cd54a0340f Fix a typo. And typo in Kconfig file is reflect in all defconfig files. 2017-06-15 14:29:09 -06:00
Gregory Nutt
b0fda33e13 Kconfig: Rename CONFIG_ARM_TOOLCHAIN_IAR to CONFIG_ARCH_TOOLCHAIN_IAR 2017-05-13 16:01:38 -06:00
Gregory Nutt
6e4918c557 Remove CONFIG_ARM_TOOLCHAIN_GNU; replace with CONFIG_ARCH_TOOLCHAIN_GNU 2017-05-13 13:28:15 -06:00
Alan Carvalho de Assis
853d332b6c Move CAN subsystem to its own directory and put device drivers there 
Signed-off-by: Alan Carvalho de Assis <acassis@gmail.com>
 2017-05-12 11:48:47 -03:00
Gregory Nutt
0de294a586 Fix lots of occurrences of 'the the', 'the there', 'the these', 'the then', 'the they. 2017-05-11 13:35:56 -06:00
Gregory Nutt
2043e1a114 IOBs: Move from driver/iob to a better location in mm/iob 2017-05-09 07:35:30 -06:00
Sebastien Lorquet
1bb76c43d3 atmel boards 2017-04-28 18:27:30 +02:00
Gregory Nutt
9aac1dd44d configs: Remove all setenv.bat files. Remove all references to setenv.sh and setenv.bat from all config README files. 2017-04-26 10:12:13 -06:00
Gregory Nutt
1620ff05f4 Remove all setenv.sh files. 2017-04-26 07:49:37 -06:00
Gregory Nutt
bfb93338f6 Move net/iob to drivers/iob so that the I/O buffering feature can be available to other drivers when networking is disabled. 2017-04-20 16:08:49 -06:00
Gregory Nutt
bcc6b61fc1 Move include/nuttx/net/iob.h to include/drivers/iob.h; rename CONFIG_NET_IOB to CONFIG_DRIVERS_IOB 2017-04-20 14:53:30 -06:00
Gregory Nutt
77f980e676 Buttons: Correct some comments left after last button-related change: 32- vs 8-bit bit set. 2017-04-09 14:44:49 -06:00
Gregory Nutt
dedc3c15d4 Add support for NuttX controlled LEDS and for board_initialize. Separate initialize logic to stm32_bringup.c so that in initialization can occur either through board_initialize() or through board_app_initialize(). Same as with most other newer board configurations. 2017-04-09 10:16:05 -06:00
Gregory Nutt
f9e402018b Buttons: Change return value of board_buttons() and the type of btn_buttonset_t to uint32_t so that more than 8 buttons can be supported. 2017-04-09 07:22:49 -06:00
Gregory Nutt
c071e2a30c Make sure that CONFIG_PTHREAD_MUTEX_ROBUST=y is selected every configuration that enabled pthreads. 2017-03-27 09:21:03 -06:00
Gregory Nutt
b07d3fc305 Rename CONFIG_MUTEX_TYPES to CONFIG_PTHREAD_MUTEX_TYPES 2017-03-27 09:08:14 -06:00
Gregory Nutt
b808084e57 Move wireless IOCTLs from include/nuttx/net/ioctl to include/nuttx/wireless/wireless.h. Add some linux compatible structures to use with the IOCTL commands. 2017-03-13 09:51:31 -06:00
Gregory Nutt
c428661e18 apps/examples/usbterm is gone because it can be configured to perform an illegal call into the OS. Remove all traces of CONFIG_EXAMPLES_USBTERM* and all of the illegal device support. 2017-03-09 15:39:28 -06:00
Gregory Nutt
d0813aa0c5 Refresh all ARM configurations 2017-03-09 10:23:41 -06:00
Gregory Nutt
0f46d714a9 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 15:10:37 -06:00
Gregory Nutt
4c82827ab1 board_button_irq: Button IRQ logic no longer returns the xcpt_t oldhandler. There value is useless and dangerous after the recent changes to interrupt argument passing. 2017-03-02 14:37:22 -06:00
Gregory Nutt
f5f9d82d5a arch_phy_irq: Now returns int instead of xcpt_t oldhandler. The oldhandler is useless after the changes to the interrupt argument. Also access an argument for the PHY interrupt. phy_notify.c driver changed to exploit new interrupt argument passing. 2017-03-02 08:43:33 -06:00
Gregory Nutt
67de2e5f66 Add argument to STM32 EXTI interrupt handlers. 2017-02-27 14:21:30 -06:00
Mark Schulte
b3222bbc8a irq_dispatch: Add argument pointer to irq_dispatch 
Provide a user defined callback context for irq's, such that when
registering a callback users can provide a pointer that will get
passed back when the isr is called.
 2017-02-27 06:27:56 -06:00
Gregory Nutt
4539988d00 Removed CONFIG_LIBC_ARCH_BZERO. bzero() is a deprecated interface. There are no architecture-specific replacements and, if there were, they should replace memset(), not bzero(). 2017-02-22 10:41:49 -06:00
Gregory Nutt
3dbdb3bb31 CONFIG_SDIO_DMA: Was been defined in several low-level architecute Kconfig files, but used at the highest levels in the code. Both are bad and both are fixed with this commit 2017-01-31 11:52:00 -06:00
Gregory Nutt
9ac00a355f Add capabilities() method to SDIO interface. Remove CONFIG_SDIO_WIDTH_D1_ONLY. That should not be a global propertie, but rather a capability/limitation of single slot when there may be multiple slots. 2017-01-31 09:16:01 -06:00
Gregory Nutt
4c39b68505 SAME70-Xplained: Clone some recent SAMV71-XULT changes 2017-01-30 14:10:22 -06:00
Gregory Nutt
8ab77c55cd SAMv71-XULT: Fixes to knsh configuration. Still does not work properly. 2017-01-30 12:49:07 -06:00
Gregory Nutt
eeeb0ad112 Refresh all SAM v7 configurations 2017-01-30 11:24:32 -06:00
Gregory Nutt
3c4684ef5f Eliminate CONFIG_ARCH_OPTIMIZED_FUNCTIONS. Move options to select architectur-specific C library options from libc/Kconfig to libc/machine/Kconfig and rename. 2017-01-20 09:30:07 -06:00
Gregory Nutt
f063e4c5ac Remove Calypso architecture support and support for Calypso SERCOMM driver. 2016-12-13 18:35:52 -06:00