for the citimon stats:
thread 0: thread 1:
enter_critical (t0)
up_switch_context
note suspend thread0 (t1)
thread running
IRQ happen, in ISR:
post thread0
up_switch_context
note resume thread0 (t2)
ISR continue f1
ISR continue f2
...
ISR continue fn
leave_critical (t3)
You will see, the thread 0, critical_section time is:
(t1 - t0) + (t3 - t2)
BUT, this result contains f1 f2 .. fn time spent, it is wrong
to tell user thead0 hold the critical lots of time but actually
not belong to it.
Resolve:
change the nxsched_suspend/resume_scheduler to real hanppends
Signed-off-by: ligd <liguiding1@xiaomi.com>
Register: smp
Register: nsh
Register: sh
Register: getprime
Register: ostest
Espressif HAL for 3rd Party Platforms: b4c723a119344b4b71d69819019d55637fb570fd
common/xtensa_cpupause.c: In function 'xtensa_pause_handler':
common/xtensa_cpupause.c:240:3: warning: implicit declaration of function 'xtensa_savestate'; did you mean 'xtensa_setps'? [-Wimplicit-function-declaration]
240 | xtensa_savestate(tcb->xcp.regs);
| ^~~~~~~~~~~~~~~~
| xtensa_setps
common/xtensa_cpupause.c:243:3: warning: implicit declaration of function 'xtensa_restorestate'; did you mean 'xtensa_context_restore'? [-Wimplicit-function-declaration]
243 | xtensa_restorestate(tcb->xcp.regs);
| ^~~~~~~~~~~~~~~~~~~
| xtensa_context_restore
Signed-off-by: hujun5 <hujun5@xiaomi.com>
/vela/nuttx/drivers/pci/pci_ecam.c:432:(.text.pci_ecam_get_irq+0x16): undefined reference to `up_get_legacy_irq'
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
pci/pci.c:1128:15: warning: format '%x' expects argument of type 'unsigned int', but argument 3 has type 'uint32_t' {aka 'long unsigned int'} [-Wformat=]
1128 | pciinfo("Limit MME to %x, num to %d\n", mmc, num);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~
| |
| uint32_t {aka long unsigned int}
pci/pci.c:1128:30: note: format string is defined here
1128 | pciinfo("Limit MME to %x, num to %d\n", mmc, num);
| ~^
| |
| unsigned int
| %lx
Signed-off-by: Yongrong Wang <wangyongrong@xiaomi.com>
pci/pci_qemu_test.c:218:6: warning: ‘ops’ may be used uninitialized [-Wmaybe-uninitialized]
218 | ops->write(dev->bus, &hdr->test, num, sizeof(num));
| ~~~^~~~~~~
pci/pci_qemu_test.c: In function ‘pci_qemu_test_probe’:
pci/pci_qemu_test.c:286:41: note: ‘ops’ was declared here
286 | FAR const struct pci_qemu_test_ops_s *ops;
|
Signed-off-by: p-szafonimateusz <p-szafonimateusz@xiaomi.com>
pci/pci.c:415:34: warning: variable ‘res’ set but not used [-Wunused-but-set-variable]
415 | FAR struct pci_resource_s *res;
| ^~~
pci/pci.c: In function ‘pci_scan_bus’:
pci/pci.c:663:32: warning: unused variable ‘ctrl’ [-Wunused-variable]
663 | FAR struct pci_controller_s *ctrl = bus->ctrl;
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Should init the priv->wait before rpmsg_register_callback() because
rpmsgfs_ns_bound() may has been called before rpmsg_register_callback()
returned.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Because the rpmsg_virtio will assert when endpoint callback return
error, so add more error log to the rpmsgfs server to help to locate
the root cause.
Signed-off-by: Bowen Wang <wangbowen6@xiaomi.com>
Summary:
1.Add configuration to allocate memory from the specified section
2.Replace all memory operations (kmm_) in the vfs with
fs_heap_. When FS_HEAPSIZE > 0, memory is requested for the file system by specifying a configured heap location. By default (i.e. FS_HEAPSIZE=0) fs_heap_ is equivalent to kmm_
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
Summary:
Implementation in accept4 is special, the requested newsock is saved as filep->priv. This will cause sock_file_close to use fs_heap_free filep->priv during close. When fs_heap is configured, the released memory will not be on fs_heap, causing a crash.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
The FIOC_FILEPATH ioctl call is required if smartfs is to be used
together with inotify monitoring system. This implements the
call support to smartfs file system. The path to the file has to
be stored in smartfs_ofile_s structure during file open (and is freed
during close) as smartfs currently is not able to obtain the path
knowing only the file node. The full path is concatenated with the file
name and creates the full path needed for inotify to detect whether
the file is on the watchlist.
Signed-off-by: Michal Lenc <michallenc@seznam.cz>
Summary:
When restoring rammap fpos, we check the return value to avoid potential problems caused by no error return if the restore fails.
Signed-off-by: chenrun1 <chenrun1@xiaomi.com>
reason:
1 To improve efficiency, we mimic Linux's behavior where preemption disabling is only applicable to the current CPU and does not affect other CPUs.
2 In the future, we will implement "spinlock+sched_lock", and use it extensively. Under such circumstances, if preemption is still globally disabled, it will seriously impact the scheduling efficiency.
3 We have removed g_cpu_lockset and used irqcount in order to eliminate the dependency of schedlock on critical sections in the future, simplify the logic, and further enhance the performance of sched_lock.
4 We set lockcount to 1 in order to lock scheduling on all CPUs during startup, without the need to provide additional functions to disable scheduling on other CPUs.
5 Cpu1~n must wait for cpu0 to enter the idle state before enabling scheduling because it prevents CPUs1~n from competing with cpu0 for the memory manager mutex, which could cause the cpu0 idle task to enter a wait state and trigger an assert.
size nuttx
before:
text data bss dec hex filename
265396 51057 63646 380099 5ccc3 nuttx
after:
text data bss dec hex filename
265184 51057 63642 379883 5cbeb nuttx
size -216
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
Signed-off-by: dulibo1 <dulibo1@xiaomi.com>
1.call_data->refcount is not remote_cpus;
2.nxsched_smp_call_add enqueue the call_data;
3.maybe nxsched_smp_call_handler is just doing;
4.dequeue the call_data but call_data->refcount is not corret;
5.unpredictability case will occur;
reason:
Currently, if we need to schedule a task to another CPU, we have to completely halt the other CPU,
manipulate the scheduling linked list, and then resume the operation of that CPU. This process is both time-consuming and unnecessary.
During this process, both the current CPU and the target CPU are inevitably subjected to busyloop.
The improved strategy is to simply send a cross-core interrupt to the target CPU.
The current CPU continues to run while the target CPU responds to the interrupt, eliminating the certainty of a busyloop occurring.
Signed-off-by: hujun5 <hujun5@xiaomi.com>
When building a branch like `releases/12.7`, the CI Workflow incorrectly checks out the `master` branch of `nuttx-apps`, instead of `releases/12.7`. This PR fixes a typo in `apps_ref`, to check out the correct branch.
reason:
1In the scenario of active waiting, context switching is inevitable, and we can eliminate redundant judgments.
code size
before
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
262848 49985 63893 376726 5bf96 nuttx
after
hujun5@hujun5-OptiPlex-7070:~/downloads1/vela_sim/nuttx$ size nuttx
text data bss dec hex filename
263324 49985 63893 377202 5c172 nuttx
reduce code size by -476
Configuring NuttX and compile:
$ ./tools/configure.sh -l qemu-armv8a:nsh_smp
$ make
Running with qemu
$ qemu-system-aarch64 -cpu cortex-a53 -smp 4 -nographic \
-machine virt,virtualization=on,gic-version=3 \
-net none -chardev stdio,id=con,mux=on -serial chardev:con \
-mon chardev=con,mode=readline -kernel ./nuttx
Signed-off-by: hujun5 <hujun5@xiaomi.com>
